ARC mandatory property lost (bug or user error?)

I have a few entities with an ARC relation. In the logincal model one can't set this to mandatory or optional. (as far as I know).
This leads to a annoying issue:
The property can be set in the relation model by clicking on the arc. So far so good.
When I make changes in the logical model and engineer to relational model the mandatory property switches back to optional.
What am I doing wrong?
BTW hope someone reads this
As a feature request it would improve users productivity if one could click the header of the name column in the Property Propagation dialog.
That would make selection much more efficient.

Thank you Philip
Just to verify if I was clear and your answer solves the case .
I try to achieve to make this arc mandatory:
Now the only way to achive this is to click and set property on arc below.
Then one of the two optional cols must be set:
That setting is lost when I engineer from logical to relational again.
Thanks for logging the ER and Bug!

Similar Messages

Bug or User Error - Virtual Copy

All,
I'm still on 1.3.1 (still too much dust flying on 1.4.1), Mac OS X 10.4. The situation is as follows: Took a standard RAW image file from Canon 40D.
1. Made a virtual copy of the original, crop aspect set to 8x10, made adjustments, etc. including some spot removal, etc.
2. Made a virtual copy of the virtual copy, converted to Grayscale, "assumed" the crop value and spot removals came with it. Instead, the second virtual copy is showing up with a crop value of 4x5 and the spots removed in the first virtual copy, return.
It is very repeatable, and not associated with a specific image file. I haven't tried it on Windows XP yet.
Jay S.

Hal,
I've been doing a little more with this. In Develop module, if I make a Virtual Copy of an image where I've used a Metadata preset to add some data to the image, that metadata preset is refected in the virtual copy as well, if I do the same exact thing with the same exact image in Library mode, the metadata is set to None, as opposed to the Preset I used with the original.
I know this is different from what I originally stated but seems odd. Also I'm not sure why you don't consider it a bug, small as it may be. I set the original to 8x10, if I wanted the lower ratio of 4x5, I would have set it to that. If 8x10 didn't matter to Adobe then why have it as an option. In my mind the Virtual Copy should reflect the same choice made on the original.
Jay S.

Timestamp of videos not consistent with photos - appear out of order - bug or user error?

We just returned from Hawaii and, of course, we have a mix of photos and videos. However, subsequent photos and videos taken about the same time, which should have timestamps minutes apart, have timestamps that differ by 4 hours. As I dig into this deeper, it seems all the videos have timestamps 4 hours from what they should be(my view). At a minimum, I believe the photo and video timestamp should be set per a consistent definition.
I am determining this after I imported the pictures into iPhoto. I have done the import several times and the results are consisent.
Example:
IMG_0233.JPG - April 6, 2013 6:14:46 PM
IMG_0234.MOV - April 6, 2013 11:15:08 PM <----This should be 6:15:46 PM
Tried to verify the timestamp of the video and photo while the picture is on the iPhone…had to buy iPhoto for IOS for $5. The photo timestamp is the same as stated in iPhoto(IOW, IMG_0233.JPG is 6:14), but the video timestamp is just April 6, 2013…no exact time. Guess I wasted $5.
Computer Data:Mac Mini 2.3Ghz Intel Core i5 - 8GB Memory - OS X 10.8.3
Iphoto 11 9.4.3
Phone Data:
iPhone 5
iOS 6.1.3
Date & Time preference: 'Set Automatically'=ON
Travel Timezone where pics taken: Hawaii - GMT-10
Home Timezone: Chicago - normally GMT-6(4 hour difference from Hawaii), but right now Chicago is GMT-5 due to daylight savings.
My theory is that there is a bug that sets the video timestamp to the 'home timezone', potentially only when 'automatic timezone is set.
This seems easily fixed by doing a batch change to adjust the timestamp on all videos
Any other explanations? I am hoping I am doing something wrong.

2 things...
1) my opening paragraph says 4 hours, but it should be 5. DOH
2) i just imported a bunch of pictures and videos from an android phone. Same issues. The Android photos seem to be perfectly aligned with the photos from the iphone 5, but the videos are 5 hours off the mark(later). Of course, I want to view the pictures with the time in Hawaii, not Central Time, so the videos are definitely in the wrong from an intuitive standpoint...as I see it.
2013-04-09 11.14.25.jpg - Taken at 11:14am in Hawaii. This data is per the file as it sits in dropbox and viewed by my mac mini Finder. Android puts the file on drop box from the phone, and I imported to iphoto from dropbox. Despite the filename indicating 11:14am, finder says the file was created at 4:14pm. However, iPhoto, correctly puts a timestamp of 11:14am and picture is where I expect it from a time standpoint at 11:14am.
2013-04-09 11.15.05.mp4 - Taken at 11:15am in Hawaii. This was imported into iPhoto via dropbox at the same time, but it is showing up in iPhoto at 4:15pm, throwing off the sorting.
So, now I believe I have an iPhoto issue and probably brought this question to the wrong forum?
I have fixed the problem by doing a 'adjust time and date' to all videos, both from iphone and android, to be 5 hours earlier in time. Now everything lines up, but I am scratching my head why this isn't done consisently between photo and video in iPhoto, and why I have not run into this before.....

Live Cycle Form problems - bug or user error?

At work my assistant and I have created an interactive form from an Excel spreadsheet and then proceeded to add drop down boxes in numerous locations on the form. However, when we try to create a pdf in live cycle (8), the drop down boxes pre-populates with the first alpha-numeric character option in the drop down list, instead of a blank space, which is the default state. In addition, the tabbing between the drop down boxes becomes random and I am unable to change them. The form is six pages long, with about twenty to thirty drop down boxes on each page (I think - I don't have the form with me now - on my work computer). Either way - it is a pretty big form. The weird part is that when I split the form in smaller sections (i.e. one page at a time, the problems described above does not happen. I also have numerous other (shorter) forms that work just fine. Is there some sort of size or complexity limitation that is causing this, or is there another way to get around this? The only thing I could do so far to get it to work is to remove the drop down boxes and just make them text entry fields. Any advice would be appreciated.

1. How are you converting from XLSX to PDF. Are you printing the file ato PDF then adding the fields after the fact?
2. I was able to change the tabbing order using the tabbing tool (under the View menu). Moving the fields in the hoierarchy will not affect the tabbing order in this case. By default it is left to right - top to bottom. So if you move the fields on the page then it will affect tabbing order. You really shodul be doing this via the tabbing tool.
3. On teh version that you sent it was showing a blank entry for all DDLists until you selected an item.
Note that I am using version 9 of Acrobat/Reader and version 8.2.1. of Designer.
Paul

Lines disappearing on Master Slide (Bug or User error?)

Hi all -
I'm using the "Magic Move" feature on one of the Master slides from a theme called "Blueprint". When I use Magic Move some of the "permanent" lines from the master slide disappear during the move and then reappear when the move is finished. Any suggestions for solving this problems would be greatly appreciated.

Thanks Ken -
I moved my presentation to several other themes, but the problem seems to extend to those Master Slides as well. All of my elements (photos, text, etc.) come through the transitions just fine, but some of the lines on the Master Slide itself disappear while the transition takes place. It makes the whole thing pointless it the viewer can see this, and there's no way to change the master or stop this from happening. Hopefully Apple will take a look.

Property Node in VI throws Error 7 in LV 7.1 but runs OK in LV80 and LV86

Hi everybody
I build a custom IVI instrument driver and using the LV tool <Generate VI Interface from Instrumnet CVI Driver> I was able to get a LV wrapper for each driver method. From LV86 I saved first in LV80 and from LV80 I saved as LV71. I have all these LV versions on installed on my PC.
I have no trouble in using these LV wrappers in any of these LV versions as they work OK.
Now my IVI driver has also Properties that the Import Driver Tool does not convert as a wrapper and for that reason I had to create a Property Node Warpper myself and saved in the same LLB under LV/instr.lib folder.
Once I have all these method wrappers and the property node wrappers I made a small VI
1. Initialize IVI With Options on a TCPIP instrument
2. Set-Get an IVI Timeout property
3 Close IVI driver on TCPIP instrument.
Good part is that in LV 86 and in LV 80 the VI is running fine when I use these LV version wrappers from their coresponding instr.lib folder.
As soon as I am going to use the LV 71 wrappers in LV 71 I could create the same small VI to Set/Get Timeout and the VI look OK nothing is broken but when I run it the Initialization is OK but as soon as is reaching the Timeout Set Property Node gets out an Error Code 7.
To run this VI the user need to install the jdCMR IVI driver then add the LV71 jdCMR wrappers inside LV71/instr.lib and then he may build any VI using these LV warppers.
The only problem is that the Property Node get out an Error Code 7 and the same error code get out from Property Node if I am picking the Property Node from VISA Advanced Pallette, connect this node to jdCMR driver, set Timeout property inside the node and after connecting the input and output references plus the input and output error to Initialize and Close LV wrappers I still get this error at running time.
The same LV 71 VI if I open in LV80 or in LV 86 runs without any problem?
Does anybody knows why LV 71 is not working the same way as LV80 and LV86 with respect to Property Node?
Btw When I save my VI from LV 80 to LV 71 I get this warning...
IVI Error Message Builder.vi
    Cannot save VI from VI.LIB to previous version.
Merge Errors.vi
    Cannot save VI from VI.LIB to previous version.
Thanks
Sorin

Hi
For further testing of the IVI driver Property Node bug with LabVIEW 7.1 IVI drivers I download and installed two different IVI drivers from two very known instrument companies, Rodhe-Schwarz and Agilent Technologies.
I have to mention that both these companies releasead their IVI NI LabVIEW 7.1 drivers under NI Instrument Driver Network and ready to be installed and used by any customer of these two instruments.
The bug is present only in LabVIEW 7.1 version as if I take the same VI that breaks in LabVIEW 7.1 I could run it without any problem in LabVIEW 8.0 or LabVIEW 8.6 versions.
Anybody could test this bug for these two NI released IVI drivers in simulation in LabVIEW 7.1 by following these links below.
Agilent ag81150ni IVI Driver for LabVIEW 7.1 install from here. Run in simulation only by setting Simulate=1
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=55798957B1A633BDE0440003BA7CCD...
   Rodhe Schwarz rsngpt IVI Driver for LabVIEW 7.1 install from here. Run in simulation only by setting Simulate=1
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E91D6659CE034080020E748...
After installation complete close LabVIEW 7.1 if was open, then restart LabVIEW 7.1 and now you may see under the LabVIEW Instrument Driver Palette two new IVI drivers ready to be used as LabVIEW 7.1 wrappers.
Open a new blank VI and from Instrument Driver Palette use two well known Vis that are Initialize With Options.vi and Close.vi add them on your blank VI block diagram and connect thm together. Accept all default parameters except Simulate that must be Simulate=1.
Both Vis run OK in simulation mode without errors. Now pick a Property Node from VISA Advanced Panel and squeeze this between the Initialize With Options VI and Close VI and make the instrument reference in-out and error in-out connections.
Now run these two simple Vis in simulation
I run Rodhe Schwarz IVI driver and Property Node passes OK until the end
I run Agilent IVI driver but Property Node is getting out Error Code 7 that is the same as my own driver error.
Both these IVI drivers are under NI Instrument Driver Networks and have been built and integrated as native NI IVI instrument drivers.
Question is why they behave so different with respect to Property Node from the VISA Advanced Panel?
I attached the screen shots as PNG files that show clearly the difference of VISA Property Node behaviour when used under the same circumstances.
Thanks  Sorin
Attachments:
ScreenTestShots.zip ‏152 KB

Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAIL

Good Afternoon,
I have the following issue in the moment of update the data in the Employee Self-Service -
>Personal Information----->Addresses, with a user at the moment of save the data the portal display the following message of dump
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
     at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:534)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:952)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1115)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
     at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
     at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more
Regards,

Hi Vijay,
I have the following configutation
32     0002              B1
32     0006     1     A1
32     0021     1     B2
32     0021     2     A6
10     0002              B1
10     0006     1     A1
10     0021     1     B2
10     0021     2     A6,
However this employee is the single that display is error.
I check the data of this employee, compare it and this well.
Regards,

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

'kmosx: I lost my admin user' Not working Unix Guru required!

Hi,
My Dual G5 decided (by itself) that I was no longer qualified to administer it and has removed the admin privileges from my account demoting me to a standard user.
I tried Michael's 'kmosx: I lost my admin user' guide but am getting a Unix error after trying the 'nicl -raw /var/db/netinfo/local.nidb -create /groups/admin gid 80' command.
The error is 'create: invalid path'
I've successfully repaired the disk using the fsck - fy command and have no errors. I've also have write privileges on the disk.
Basically if there is a Unix guru that could assist it would be most appreciated.
Cheers

Ok, thanks for the support so far. I've ran the nidump -r /groups / command and it just hung there doing nothing. I had to ctrl+c to stop it. The same thing for the users.
I had a look in the local.nidb directory and I have a range of 'Store.xxxx' files with various dates. Would it be possible to revert back to a previous netinfo db? I'm assuming that these files are previous versions. The most recent is yesterdays Store.672 when I noticed the problem.
Also, in single user mode is it possible to create a new user with admin privileges? I could then use that user to change my login to admin and then remove the newly created user. Or does it have to have a record in the netinfo db?
If I remove the .AppleSetupDone file and re-run the setup program what will I lose? Will this overwrite any personal files (I have 30Gb of photos and databases that although backed up would I can still access through the standard user)?
Thanks in advance.

How to display user errors

Hi,
In previous version of JHS (prior to 10.1.2) there was a good example on how to display custom user errors after wrong input.
How can these errors be shown in 10.1.2?
Regards,
Marcel

Marcel,
Yes, you need to create a ListResourceBundle class that "wraps" access to the property file. Here is an example:
package model.exception;
import java.util.HashMap;
import java.util.HashSet;
import java.util.LinkedList;
import java.util.ListResourceBundle;
import java.util.Locale;
import java.util.Properties;
import java.util.PropertyResourceBundle;
import java.util.ResourceBundle;
import java.util.Enumeration;
* Wrapper class around ApplicationResources property file
* so we can use this property file to read messages from. This wrapper class is
* needed because a JboException expects a ListResourceBundle class, and cannot
* handle a property file.
public class CmsMessagesWrapper extends ListResourceBundle
public static final String BUNDLE_NAME = "view.ApplicationResources";
private static HashMap sLocaleContents = new HashMap();
protected Object[][] getContents()
if (sLocaleContents.containsKey(getLocale()))
return (Object[][])sLocaleContents.get(getLocale());
ResourceBundle propFile = ResourceBundle.getBundle(BUNDLE_NAME,getLocale());
String[][] temp = new String[2000][2];
Enumeration keys = propFile.getKeys();
int counter = 0;
while (keys.hasMoreElements())
String key = (String)keys.nextElement();
temp[counter] = new String[] {key,propFile.getString(key)};
counter++;
Object[][] contents = new String[counter][2];
System.arraycopy(temp,0,contents,0,counter);
sLocaleContents.put(getLocale(), contents);
return contents;
Then for each additional language, you need to create an addtional wrapper class, for example:
package model.exception;
import java.util.Locale;
public class CmsMessagesWrapper_fr extends CmsMessagesWrapper
public CmsMessagesWrapper_fr()
public Locale getLocale()
return super.getLocale();
Steven Davelaar,
JHeadstart Team.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt

[svn] 3722: Bug: BLZ-260 - Error message for a legacy =3. 0 client poll failing against a =3.1 server is unclear

Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Screen output without connection to user,error key:RFC_ERROR_SYSTEM_FAILURE

Dear Experts,
I am getting following error while executing application developed in WebDynpro for JAVA.
"Screen output without connection to user,error key:RFC_ERROR_SYSTEM_FAILURE"
I have checked all the possible causes. still not able to resolve the same. Could any one of you suggest any way to resolve this?
Thanks and regards,
Pradnya

Hi,
Check the following SAP help link, look for JCO_ERROR_SYSTEM_FAILURE and its corresponding action for resolution:
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
also check the dev_jrfc.trc trace file for the details as mentioned in the above link
Siddharth

Is my Instant Client Working or is it User Error?

From a help desk standpoint, How can I help my users to eliminate that it isn't the software and it is probably a user error? In the past I have used TNSPING to verify that at least the tns entry is being used and is communicating with a listener, but that isn't in an instant client so what do the Instant Client Experts do for testing the software?

My favourite tool is a client trace - it's no good if you have to help somebody over the phone, but it is the best diagnostic tool if you can get your hands on the machine.
It takes some practice to read Oracle client traces; if you have access to Metalink, note 156485.1 will prove helpful for you.
Yours,
Laurenz Albe

Help! While downloading Lion, I lost WIFI and got error message . . .

While downloading Lion, I lost WIFI and got error message "An error has occurred." Tried to re-download and the dowload icon says "OSX Lion--Waiting . . . " Please help!! What should I do?

Don't worry about the download, you can go back to the AppStore > Purchases tab and download it again.
Or from another Mac if you have one. Try a restart, it may even start the download where it left off.

ARC mandatory property lost (bug or user error?)

Similar Messages

Maybe you are looking for