ARC support for new cameras such as Canon D5 MkII

Is it true that raw images from cameras introduced after CS4 such as the Canon D5 MkII will only be supported with CS4 and not with ARC in CS3?
This is hard to believe.
Bob

Yes
Upgrade or die.... or at least use the latest DNG converter and edit the
DNG files with what ever ACR you have.
For me I have CR4 but I convert to DNG anyway as they are smaller than
my camera raw files and there is no "side car" files needed to hold the
conversion data. This is important to me as I store my images on a
network attached drive, and I would need to move 2 files not just 1 and
if the "side car" file is lost then all the changes to the RAW file is
lost and must be re-created.
All this and no loss of data.
John Passaneau

Similar Messages

DNG Converter support for New Camera

What is the approximate usual time from the release date of a new camera
(specifically the Sony DSC RX100) and support for the camera by ACR or
DNG Converter ?

ACR and the Adobe DNG Converter are updated in an orderly fashion from three to four times a year. So you'll see a new version every three to four months.
The release of any new camera model has no bearing on this.

When will new Lightroom update be available with support for new cameras

Just purchased a fugi XT1. Any idea when new Lightroom update will be available for support for the raw RAF files?
Thanks,
Matthew Kraus

dj_paige wrote:
Right here, on the front page of this very forum, Adobe provides the answer
Well, not really - that FAQ doesn't explains policy on pre-announcing support, which is what's actually being asked about.
This gets closer, but even this is unspecific as to the policy...
Matthew, the short answer is: nobody who knows is allowed to say.

RAW support for new camera in Bridge CS3

Hi all
I have PS Elements 6 on a Mac and have updated to ACR 5.2 which allows Elements to open the RAW files from my new Panasonic G1 camera. However, I have to do this direct from Elements as I get the message in Bridge that 'this version of Bridge does not support this file'.
Am I correct, therefore, in thinking I need the CS4 version of Bridge. If so, is there any way of getting this without buying the full version of Photoshop?
Thanks
John

Here are the instructions from the downloads page:
To install with Adobe Photoshop Elements 6: NOTE: You must follow all of the new instructions in order to successfully install the Camera Raw plug-in for Photoshop Elements.
1. Exit Photoshop Elements and Adobe Bridge.
2. Open the download file and double-click CameraProfiles.dmg and follow the onscreen instructions.
3. Navigate to the root of the local disk (not the user's home folder).
4. Navigate to:
(Please read directory carefully)
Library/Application Support/Adobe/Plug-Ins/CS3/File Formats
5. Move the existing plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
6. Copy the Camera Raw plug-in,
Camera Raw, from the download into the same folder as in Step 4.
7. Launch Photoshop Elements or Adobe Bridge.

Support for new camera Panasonic GH4

Could you please tell me if there is an update so that I can view files from my Panasonic GH4.
Thanks

The last update for Lightroom was released on April 7th, prior to the sale of the GH4 so support will not be available until the next update of Lightroom. Updates usually happen every three months. Have a look at the link below and it will give some indication of the procedures involved.
http://blogs.adobe.com/lightroomjournal/

Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii. Is there a Camera RAW version for me?

Thanks for your help. I checked out DNG on YouTube and understand more
about it. I downloaded the DNG converter and transferred in files from my
camera. Then I imported into Lightroom. It works! Thanks again.
On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

8.3 Is Not Just for New Camera Support

I read all through the gumph when DPReview announced that ACR8.3 was available, and decided not to bother because it only seemed to support some new camera models. But just seen a post in John Nack's blog that suggests there's a bit more to it. So in case I was not the only person missing out...
http://blogs.adobe.com/jnack/2013/11/camera-8-3-rc-for-photoshop-cc-cs6-available-on-adobe -labs.html
or
Camera 8.3 RC for Photoshop CC & CS6 available on Adobe Labs
Camera Raw 8.3 is now available as a release candidate on Adobe Labs for Photoshop CS6 and Photoshop CC on Adobe Labs. For both versions it includes the new camera support mentioned below, and for Photoshop CC includes the following new features:
Whites and Blacks now support Auto Levels-like functionality via shift-double-click on the sliders.
Separate Auto Temperature and Auto Tint feature. Shift-double-click to invoke “auto temperature” and “auto tint” separately.
Ability to option-click shortcut in Synchronize, New Preset, Save Settings, and Copy/Paste (Bridge) dialog boxes. Option-click a checkbox to check that box exclusively. Option-click again to toggle previous checkbox state.
Set the background color of the work area. Context-click outside the image in the work area to select a background color from a popup menu.

I thought I started this thread in the Photoshop forum, but I guess it might have been moved. Just my mind set, because I never browse this forum. The thing is I had people like JJ in mind who I am not sure if he will continute with the CC trial, and may just use CS6, but I hadn't thought about the extra features being for CC only.

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

Support for safety camera locations when using off...

I've seen people manually post the file (as text) that you can put in the relevant folder on your phone's data card - but is there any ongoing support for safety camera updates when using your phone's mapping / sat nav offline (ie no data usage)?

Jaff0 wrote:
Doesn't seem like there's any option through the PC map loader program, so the only option seems to be if anybody has posted the file - which may not always happen?
Safetyspots are not updated that often and I am sure someone on the forum would try to help you out if you asked.
Happy to have helped forum with a Support Ratio = 42.5

Does anyone know how often camera raw is updated for new cameras I have a nikon D750

HI, I was wondering how often camera raw is updated for new cameras as I have just got a Nikon D750 and at present cannot adjust raw files

Thanks for the image sample, bsailus. I am also unable to open the file.
A couple of questions.
How did you import the image (Nikon transfer, Adobe Photo Downloader, etc.)?
What was the in-camera quality setting for the image (NEF (RAW), Lossless compressed, 12-bit, 14-bit, etc.)?
Thanks!
- Chris

BIOS SUPPORT FOR NEW CPUS!!!!

hello
new post , i just got this board (6547 v1.0) board with a celeron 1.7 (clocked at 125mhz ) 2.14ghz and is total stable.
v1.8 bios support up to a 1.8 cel, are they going to make a update to support a 2hz cel, OR have they droped support for it.
and where can you get beta bios for this and other board (msi-development site).... ?( ;(
MAKE A VOTE (HOW OLD IS YOU BOARD AND HAVE THEY DROPED SUPPORT FOR NEW CPU,S FOR YOU BOARD-POST?

assuming its a 645 ultra by the bios numberlink

Support for new Nvidia Quadro gpu?

When support for new Nvidia Quadro gpu? For example Nvida Quadro K2200 and K4200
Thk

What do you mean when you say "support"? All of After Effects OpenGL features already work on those cards.
The only thing that isn't supported on those cards is GPU acceleration of the ray-traced 3D renderer, which is an obsolete and almost entirely irrelevant feature. No more GPUs will ever be added to the list of cards supported for that feature.
Details:
GPU (CUDA, OpenGL) features in After Effects

Support for USB cameras in VBAI?

NI have a free driver that allows Vision 7.1 to access USB 2 cameras. Is there anything similar available for VBAI that would allow me to use an industrial USB 2.0 camera?

The free NI-IMAQ for USB Cameras driver is meant to support simple USB webcams that use DirectShow. For machine vision or scientific imaging applications, most USB cameras don't have the performance or the features needed, like triggering. The primary "customer" for the free driver has been universities that use webcams in labs.
With that said, there are a few industrial USB cameras out there that can be used for machine vision. The problem is tha there is no industrial USB camera standard that covers them all (like there is with FireWire), so companies like National Instruments would have to provide and support different drivers and software tools for every indutrial USB camera.
A better solution is IEEE 1394 (or FireWire). They offer the same performance as USB 2.0 cameras and are around the same price. On top of that, almost every large industrial camera manufacture has a line of industrial FireWire cameras (including Sony, Basler, FLIR, and Cohu), and they all conform to the same DCAM (or IIDC) standard. WIth this standard, our one driver, NI-IMAQ for IEEE 1394 Cameras, works with all of them.
Vision Builder AI is designed to solve machine vision applications without programming, while USB cameras usually don't provide the triggering or advanced modes necessary for machine vision. Because machine vision and USB cameras don't usually go together, we didn't provide support for USB cameras within Vision Builder AI. My question to you, another_novice, is why would you like to use a USB camera with Vision Builder AI? Are there particular features in a certain USB camera that you can't find in other cameras? I would really like to know so we can get a better picture of how our customers are using our products.
Thank you.
KyleV.

How to add support for new file type.

Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
Thank you

Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
I have done this but still not able to recognize the new file type.
At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
extension.xml
<?xml version="1.0" encoding="windows-1252" ?>
<extension xmlns="http://jcp.org/jsr/198/extension-manifest"
           id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
           rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
    <name rskey="EXTENSION_NAME">My Code Editor</name>
    <owner rskey="EXTENSION_OWNER">Me</owner>
    <dependencies>
        <import version="10.1.3">oracle.jdeveloper</import>
    </dependencies>
    <hooks>
        <jdeveloper-hook>
            <addins>
                <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
            </addins>
        </jdeveloper-hook>
        <feature-hook>
            <description>My Code Editor</description>
            <optional>true</optional>
        </feature-hook>
        <document-hook>
            <documents>
                <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                    <suffix>my</suffix>
                    <suffix>MY</suffix>
                </by-suffix>
            </documents>
        </document-hook>
        <editor-hook>
            <editors>
                <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                    <name rskey="EXTENSION_NAME">My Editor</name>
                </editor>
                <mappings>
                    <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">
                        <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                   preferred="true"/>
                        <open-with editor-class="javax.ide.editor.CodeEditor"/>
                    </mapping>
                </mappings>
            </editors>
        </editor-hook>
    </hooks>
</extension>
public class MyAddin implements Addin {
    public static final String MY_EXTENSION = "my";
    public void initialize() {
        System.out.println("MyEditor Constructor");
        new MyLanguageModule();
        Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
        CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
        LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
}I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
Todd

CS5.1 support for new DSLR cameras (D600)

I would like to understand the business decission (if there is any) why Adobe decided that for new DSLR cameras support they will update only the Camera Raw version for the current release CS6 and not respecting the legacy for the n-1 release (updating the Camera raw for CS5.1). This is a serious concern and disapointment. Does it means that each time Adrobe has a new release , if i chnage the DLSR i am FORCED to upgrade and pay 190$ eventhus I do not need the new release features?

Ah, thanks guys - I am very very happy to eat crow on that one!
The actual point of my post was to make me feel better, and boy did it work! I did not expect any actual relief, so actually now the post is twice is good as I thought - I was actually wrong!
Anyway, I might mention (I didn't get into all the details) that I actually canceled the order for the d800e (the "e" version was backordered until just recently), as the d600 was just announced as my order was about to process.
So actually I am in the same bad situation as the previous poster, but maybe now I will go back to the d800 - saving a $450 upgrade to CS6 actually saves half the difference in price between the cameras.
And sorry for the rant on the 2 analogies. It was not a troll. I vaguely remember in my research that Lightbox comes with ACR, is that true? Lightbox doesn't come with CS5.5 MC, but I wonder if i were to buy it ($99??) that'll give me the latest ACR that supports the d600, and problem solved. I assume once i have the latest ACR it'll let me open straight into PS and not make me go through Lightbox and then PS?
Anyway, if that is correct, that would be a much better answer to the original poster (and it saves him $100). Other good answers (if this Lightbox hack won't work), might be:
"It's an incredible amount of work to support nearly every camera and lens ever made in ACR, so even though it comes free with your software, you don't get free updates once your software moves to a new version."
or
"The d600 began shipping nearly immediately upon announcement, and it takes a while to update the software." (perhaps the responder didn't realize it, but this was the situation with the d600.)
But the car-story and "if you can afford a new camera, you can afford to pay adobe" were pretty tragic answers - someone needed to call you on it, or you would have only served to upset the original poster.
Ha, PEBKAC, that is pretty good. Not very easy to pronounce, though.
I must say my last dozen interactions with adobe have all been negative, except this one, so maybe things are turning a new leaf. You're lucky I didn't get into the story of when my HD crashed, and I had to call Adobe to re-activate my old CS4 PS. It's awesome getting literally laughed at by the activation help desk person. (I had owned the software for 3 years at that point, and had only ever activated it once.) ...who just assumed I was lying. "here now let me tell you how to deactivate the old version" "the HD is dead, it ain't going to happen" "well let me show you again, because you need to do that..."
Oops, I did get into that story, didn't I?
Best,
Inline

ARC support for new cameras such as Canon D5 MkII

Similar Messages

Maybe you are looking for