Arch 0.7 install of xorg....corrupted(weird solution)

I have attempted to download xorg at least a dozen times, using archlinux.org/current/os/i686 ftp source.
Each time I receive a corrupted file.
I enter.... pacman-Scc....and clear the cache.
Repeat...pacman -Sy xorg... obtain the same result...corrupted file in archive.
My connection to the internet is adsl and the download proceeds at 88KB/sec.
This performance of arch download system for wombat0.7 suggests that many would-be users will not log-in. Much ado on the internet news about arch, too.
Whazzup? What to do to fix?

Cactus,
Happy to hear from you again.
I have run memtest 86 on all ram, replaced the 512RAM chip under lifetime warranty and have passed all tests on the 1GB memory chips.
If I used another test program, like a second opinion in medicine, which should I believe?
The only solution I see is to use only 2.5GB using the 512GB ram chip as #1.
I haven't looked that problem solver in the eye yet. Easy to try though.
I have had the 3GB memory in for many months and had one problem until arch 0.7CD install. It could be the bad apple but no way to know unless I redownload and burn a new CD while using only 512MB RAM.
You must realize I spent many hours chasing xorg and when I finally got it installed, it hasn't got a driver for my display card. That is a vdt to play on a noobie....a noobie is an expert trying a new installCD for the first time! Same treatment with XFree86..no ATI driver. I'm dead and it was an "upgrade". Had display for many
, many months but nevermore!
I will not chase it!!!!
The "WOMBAT" has sharp teeth and bites first and answers questions later. I think its poisonous to computers!
A WARNING in many languages is needed for new installs via arch0.7 to those with ATI display pci cards.
Wonder of wonders...Knoppix detects the ATI card without xorg and XFree86 and their config conundrums. Many Live CD installs are the same result:detected.. I have tried a half dozen or so.
I have questions outstanding on forums in arch that have no replies and they should start some dialog...none.
I have had a question in many forums...never answered... only one person in my experience has answered it...appears below..
When is a zero always equal to a one?

Similar Messages

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

TS1717 I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

A complete uninstall/reinstall is worth a crack with that one:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

In arch, can we install krita without koffice?

Well... just that...
in arch, can we install krita without all the other apps of koffice?
Currently I want to try/use features in krita, not the other apps of koffice...
any idea?
Last edited by luuuciano (2007-05-29 22:58:11)

If someone wants to split koffice and is willing to keep it maintained, we can host the packages + a svn repo for the PKGBUILDs on the server where KDEmod resides...
Splitting should be easy. Just check the output of configure, at some point it says "Checking if krita should be compiled" for example. At this point you can see every app/component that can be splitted into a single package.
To split koffice you need to set the DO_NOT_COMPILE shell variable. For KDEmod we split every single app but keep the libs/docs/shared things in a so called base package called kdetoys-base for example. Here is an example of a base package and an inherent splitted one.
If someone wants to do this, just contact me
Last edited by funkyou (2007-05-29 18:28:06)

My iLife v9.03 Install disk is corrupt. Where can I find a download for the the app (not update) at apple support online ?

My iLife v9.03 Install disk is corrupt. Where can I find a download for the the app (not update) at apple support online ?

I have an iLife 11 disc that doesn't work very well so I tried creating a disk image of it with Disk Utility. It took two tries but finally got a disk image that I could use to install the iLife 11 applications. Give it a try.
OT

Installing multable xorg-video drivers on an SD card

Hello all, I'm looking for some help.. I remember reading something about being able to install every xorg-video drivers on a external USB drive, However I can't for the life of me find it again! What I came here for is to ask if it is possible for me to install the entire Xorg group without any problems? Or if I need to install them a special way so that during boot time it picks which ones to use? Thanks in advance and sorry for my noobishness!

https://wiki.archlinux.org/index.php/In … eo_drivers says "The use of proprietary video drivers is not recommended for this type of installation."
Give it a go, see if you need to change the configuration between nouveau, ati and intel or does the X server figures things out on its own.
See also mkinitcpio and the kernel modules.
Last edited by karol (2014-03-07 00:54:22)

Cannot adjust brightness on win 8.1 x64(i have a WEIRD solution)

macbook pro 13' with retina display
win 8.1 x64
i cannot adjust the screen brightness
i turned off "adjust my screen brightness automatically".
i reinstalled boot camp.
i reinstalled the drivers of intel video card(5100).
the above solutions help nothing.
BUT, at last, i found a WEIRD solution to fix this issue:
1. adjust your screen resolution.
2. select an option of resolution(whatever you want, select an option casually).
3. click "Apply"
4. press ESC(cancel to change screen resolution)
5. now, adjusting screen brightness is AVAILABLE!
now, my question is: HOW TO FINALLY FIX THIS ISSUE?

I had a similar issue when I installed Windows 7 Ultimate 32 bit on my last MacBook Pro. You know how Bootcamp downloads the support drivers for your machine? Those drivers are the instructions for the each component. I messed up a step on installing it and my secondary click wouldn't work, I couldn't adjust the brightness of the screen or keyboard, and I couldn't run games because the drivers didn't install correctly for my machine. You need a USB drive, an iSO Image, a blank DVD or CD with 4GB or more storage, a disk drive with read/write capabilities, and your Mac. If you have a desktop like the iMac or Mac mini, I believe you need a USB mouse and keyboard until the drivers are installed. Follow this video and in it there are two links, one for uTorrent and one for Windows 7 Ultimate 32-bit. If you don't have uTorrent, download it and install from the link. Ignore the link to the Windows 7 32-Bit download. I found a 64-bit version if you'd like or browse the piratebay for windows 8, but I highly suggest a 64-bit version as I believe they can handle more and do more compared to a 32-bit.
Here's a link to the youtube video: https://www.youtube.com/watch?v=PqQmvMCbiwY
Here's a link to Windows 7 Ultimate 64-Bit: http://thepiratebay.se/torrent/6349390/Windows_7_Ultimate_(64_Bit)_Pre_Activated _by_c4rl05.iso
If these don't solve the

After starting Creative Cloud just a white Window appears, no Apps or something else Windows 8.1, more uninstallation and re-install didn't bring a solution

After starting Creative Cloud just a white Window appears, no Apps or something else Windows 8.1, more uninstallation and re-install didn't bring a solution. I have had installed Photoshop CC Trial Version, but had to re-boot the system, so I lost the Software. After re-installing the Creative Cloud Desktop appeared just a White window. I tried to delete the file of OOBD in AppData but no reaction. It still appears as a clear window.

See if the following helps:
https://forums.adobe.com/thread/1249756

HT201398 unable to install app,none of these solutions helped me could someone give me new solutions please

unable to install app,none of these solutions helped me could someone give me new solutions please

What app?
What 'solutions'?

Unable to install / upgrade or remove Lenovo Solution Centre

I'm getting following error while installing/upgrading or while removing lenovo solution center. I googled for the error code & found the links with windows installer error issue. But my windows installer is working good and could able to install all applications except lenovo solution centre.
I tried to delete directory and to install the newer copy but still getting this error.
Kindly guide me to remove it completely(maybe registry items to be removed ) and get it freshly installed.

Was your win7 install a Shipped lenovo install or win7 from box store install?
LSC current is version 2.0.020, released march 20, 2013.
If you used system update, it MAY not offer the most current release.
LSC MSI install log is in C:\Users\YOUR id\appdata\local\temp\LSC.log .
If you used factory install version of LSC, it is old.
==
you stated 2 issues.
(1) Some lsc version wont execute, lets say factory version.
(2) Upgrade/reinstall of some version of LSC, does msi failure, 1721.
==
I just installed Latest LSC, will uninstall shortly.
(1) error 1, you need to perform your first backup IE RNR, windows backup. dah, backed up weekly for 18 months (rnr) . error 2, You do not have enough space to perform a backup operation.
exact screen:
If you have an additional external hard drive, you can back up your data to that device. To view Lenovo external hard drive options available for purchase, Shop now.
155 GB free on my second HDD, my backup drive. SHOP NOW. Last incremental was 328 MB.
(2) warranty expired (correct), Benefits to product registration ( did that in 2008). Register NOW. But it knew i had a 3 year warranty.
(3) Hardware scan recommended. Thank you, 1 correct, Still using pc-doctor.
(4) You have windows update set to not auto install. correct.
(5) Adobe-air self updated on the 2nd launch of LSC.
IF you 1721, you ahead of the game.
Just download the hardware check LSC (linux). Need ISO burner software. download Memory check if you wish.
My 1st year on current, 2GB memory failed, mouse failed, DVD burner failed. POS-lsc, point of sale? Use your favorite seach engine , search POS if you wish.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Screensharing authentication problem and weird solution

OK, I've been having the Screensharing authentication problem that crops up regularly on this forum. Accidentally I found a very weird solution. I want to know what's going on and to let others know of the solution.
Let's say my laptop account is called 'london' and I want to connect it to my tower account called 'paris' on the LAN. I browsed the network for the tower, click 'connect as' and in the dialog box I put in "Name: paris" and "Password: xxx". I click 'connect' and I am connected as the registered user 'paris' and I can browse all of the disks. File sharing is thus working normally.
Now I click the 'share screen...' button and I get another dialog box into which I once more type "Name: paris" and "Password: xxx". This yields an authentication failure message, which many users will be familiar with.
By accident instead of typing the name and password for the account on the distant machine, I typed into the dialog box the name and password of the local machine: ie. "Name: london" and "Password: yyy". Much to my amazement the screensharing works. What is going on?

No, the username on london is london and on the machine paris it is paris. However, the passwords are different.
Just to be clear, I first connect to the remote machine's file sharing using the remote machine's username and password (ie. in the normal fashion). I then connect screensharing but give the local machine's username and password in the dialog box.
Before I made this discovery I had created a couple of fresh accounts on the remote machine. One was glitched, while the other functioned properly (ie. screensharing required the remote machine's username and password). The bizarre fix worked for my original account. I have not tested it on the new accounts for fear of screwing things up again.

Unable to boot arch after re-installing nvidia

My system is x64. I have Ubuntu installed along with Arch on a different partition. After having installed arch with some (probably redundant) nvidia packages, I decided to remove them by installing packam -S nvidia nvidia-uitls.
I had to remove mesa-(something or just mesa, I don't remember) and xf86-video-nouveau. So I installed nvidia nvidia-uitls successfully. Plus after that I installed xfce-settings because as I found out it should have resolved the issue of gnome-terminal. and I added this to xorg.conf:
Section "Extensions"
Option "Composite" "Enable"
EndSection
The bottom line is, I can't boot to arch anymore. Only standard label on the black screen shows up (kvm: disabled by bios) and nothing else happens, meaning it kind of "boots" but it doesn't boot further than showing that label. What can I do?
Here is a log:
[2014-04-30 12:06] [PACMAN] Running 'pacman -S nvidia nvidia-utils'
[2014-04-30 12:06] [PACMAN] Running 'pacman -R nouveau-dri'
[2014-04-30 12:07] [PACMAN] Running 'pacman -R xf86-video-nouveau'
[2014-04-30 12:07] [PACMAN] removed xf86-video-nouveau (1.0.10-2)
[2014-04-30 12:07] [PACMAN] Running 'pacman -R nouveau-dri'
[2014-04-30 12:07] [PACMAN] removed nouveau-dri (10.1.1-2)
[2014-04-30 12:07] [PACMAN] Running 'pacman -S nvidia nvidia-utils'
[2014-04-30 12:08] [PACMAN] Running 'pacman -R intel-dri'
[2014-04-30 12:08] [PACMAN] Running 'pacman -R xf86-video-intel'
[2014-04-30 12:08] [PACMAN] removed xf86-video-intel (2.99.911-2)
[2014-04-30 12:08] [PACMAN] Running 'pacman -R intel-dri'
[2014-04-30 12:08] [PACMAN] removed intel-dri (10.1.1-2)
[2014-04-30 12:08] [PACMAN] Running 'pacman -S nvidia nvidia-utils'
[2014-04-30 12:09] [PACMAN] Running 'pacman -R glamor-egl'
[2014-04-30 12:09] [PACMAN] removed glamor-egl (0.6.0-1)
[2014-04-30 12:09] [PACMAN] Running 'pacman -S nvidia nvidia-utils'
[2014-04-30 12:23] [PACMAN] removed mesa-libgl (10.1.1-2)
[2014-04-30 12:23] [PACMAN] installed nvidia-utils (337.12-1)
[2014-04-30 12:23] [PACMAN] installed nvidia-libgl (337.12-1)
[2014-04-30 12:23] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
[2014-04-30 12:23] [PACMAN] installed nvidia (337.12-1)
[2014-04-30 12:26] [PACMAN] Running 'pacman -S ttf-ms-fonts ttf-dejavu ttf-bistream-vera'
[2014-04-30 12:27] [PACMAN] Running 'pacman -S ttf-ms-fonts'
[2014-04-30 12:30] [PACMAN] Running 'pacman -S gnome-terminal'
[2014-04-30 12:30] [PACMAN] reinstalled gnome-terminal (3.12.1-1)
[2014-04-30 12:32] [PACMAN] Running 'pacman -S xfce4-settings'
[2014-04-30 12:33] [PACMAN] installed libxfce4util (4.10.1-2)
[2014-04-30 12:33] [PACMAN] installed xfconf (4.10.0-3)
[2014-04-30 12:33] [PACMAN] installed libxfce4ui (4.10.0-1)
[2014-04-30 12:33] [PACMAN] installed exo (0.10.2-2)
[2014-04-30 12:33] [PACMAN] installed garcon (0.2.1-1)
[2014-04-30 12:33] [PACMAN] installed gtk-engines (2.21.0-1)
[2014-04-30 12:33] [PACMAN] installed xfce4-settings (4.10.1-1)
and X (I'm not sure at what moment it appeared, it may be not related to this issue):
[ 774.795] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 774.797] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 774.799] (EE)
Fatal server error:
[ 774.803] (EE) Cannot establish any listening sockets - Make sure an X server isn't already running(EE)
[ 774.805] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 774.812] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 774.814] (EE)
[ 774.816] (EE) Server terminated with error (1). Closing log file.
Last edited by Darooma (2014-04-29 22:28:27)

Rexilion wrote:That's odd, the time counter starts at 774.
Maybe OP doesn't start X automatically at boot?

Arch freezing after install

Hi! I have installed Arch and after restart it freezes when loading modules. Sometimes it loads them and fails in some configuring part, don't remember exactly what configuration. If i get it booted it freezes few minutes later. I have installed it many times now with different partition formats and same happens everytime

Sorry for replying late. I have few years old laptop which had ran Arch well earlier. There's some 8mb corrupted part or something like that in hdd, but that part is not in use. http://eu.computers.toshiba-europe.com/ … _ID=120941
I installed Debian yesterday and it worked well until I broke it, so is that freezing about my arch install or what?
Last edited by rixutin (2009-11-11 14:22:49)

TS1717 Having problems lauching iTunes on my pc, dowloaded new version, getting error message that iTunes is not installed correctly or corrupted, reinstall. I'm afraid I will loose everything,tried to back up to earlier date,system diognosis said incompa

Having problems launching iTunes on my pc. Had iTunes on this particular pc for over a year. Have downloaded all of the new updated versions. Now I get an error message saying "This copy of iTunes is corrupted or is not installed correctly. Please reinstall." I have backed up the pc to an earlier date when when the program was working, and also performed serveral system diagnosis all saying the program is incompatible. Searched for several compatible programs, none worked. All this happened several days after visiting iTunes. I'm afraid that if I reinstall iTunes that I will loose everything and have to start all over. Eventhough everything is saved in an iCloud account and this particular pc. Never had a problem till now. Appreciate any help. Thank you, cld

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Problem booting Arch after first install on MacBook Pro

Hi all,
I've spent the past month intermittently trying to install Arch on an old MacBook Pro with a broken screen running in clamshell mode (I've reformatted, clean installed OSX, and run pacstrap around 20 times now). I was originally trying to install Debian, but the Arch Wiki was so good that I switched. The issue has been the same anyway.
Every time I try to install, I get stuck at the bootloader stage, where I need to make the installation bootable. It doesn't matter what bootloader method I use, since I've tried:
Boot from /boot partition with GRUB
Boot from separate HFS+ GRUB partition
Boot from Apple EFI System Partition (ESP) with GRUB
Boot with rEFInd
Boot with rEFInd installed to the ESP
Arch itself works fine, but when I go to boot from rEFInd's autodetected vmlinuz-linux from 128MiB ext2 partition, I get the same error message I've gotten with every other configuration:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
[ 0.558033] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.558097] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.558135] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.558189] uhci_hcd 0000:00:1a.0: init 0000:00:1b.0 fail, -19
Waiting 10 seconds for device /dev/disk/by-uuid/2b121a89-aeb9-430a-8e6c-a05b79f08427 ...
ERROR : device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427'.
You are being dropped to a recovery shell
[etc.]
When the Arch .iso live CD boots, it gets the first uhci_hcd errors, and then just moves on with:
:: hook [memdisk]
:: hook [archiso]
[etc.]
Here are the contents of my refind.conf file (/boot/efi/ESP/refind/refind.conf) (I omit all the standard comments):
timeout 0
scan_all_linux_kernels
[The example menu entries - all disabled]
menuentry "Arch Linux" {
icon /EFI/refind/icons/os_arch.icns
"Arch Boot"
loader /vmlinuz-linux
initrd /initramfs-linux.img
options "root=/dev/sda7 rw rootfstype=ext4"
And my refind_linux.conf (/boot/refind-linux.conf):
"Boot with standard options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
"Boot to single-user mode" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427 single"
"Boot with minimal options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
My custom menu entry for Arch doesn't work either (I'm still researching exactly why). I've been quite confused by different posts all over by different people on how to configure the manual refind.conf stanzas. I also tried a direct to root menu entry, where I tried the files as /boot/vmlinuz-linux, etc.
The error I always get here is the same:
Starting vmlinuz-linux
Using load options "[same as above]"
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
I've installed GRUB as well, just to be sure. Although I haven't moved it to any other partitions or 'blessed' it in OS X. (I have blessed the HFS+/EFI partitions when I used GRUB.)
Just FYI, I've used the following pages as guides:
My primary guide: Cody Littlewood's installation procedure for a MacBook Pro
The Arch Wiki MacBook Page, which was useful but a bit confusing and self-referential on the Bootloader section
The rEFInd website, by Rod Smith. I've read it fairly extensively (including an interesting comparison of SodaStream flavours)
A Gentoo Wiki page with a rEFInd example
The LFS GRUB chapter, and surrounding material
And I've largely read the Arch Wiki Beginners' Guide, Bootloaders page, GRUB page, GRUB EFI examples page, UEFI page and EFI Stub Loader page.
There have been others, but it's been a while since I read them. I've been trying to make this work for a while.
I've also looked at some other posts on similar subjects:
A post on the Arch Linux subreddit matching my (previous; with GRUB) situation, but not fixing my problem
An Arch forum post, of which there have been others, but google seems to have changed my search results.
EFI-Booting Ubuntu on a Mac, by Rod Smith
The Debian MacBook Pro page
A post about booting Debian without rEFIt
Again, there are more, but I can't find them all just now.
I've looked EVERYWHERE for a solution.
My question is, does anyone have any ideas on how I might make my computer bootable?
Almost forgot; I've run
mkinitcpio -p linux
successfully (I get the two driver warnings that seem to be standard).
Computer specifications are as follows:
Model Identifier: MacBookPro6,2 (mid 2010)
Processor Name: Intel i7
Architecture: amd64
RAM: 4GB DDR3
Graphics: NVIDIA GeForce GT 330M 512MB
Software: OS X 10.9.2
My disk partition table is as follows:
$gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.9
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Fround valid GPT with protective MBR; using GPT.
Disk /dev/sda: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): C0ADB511-F73D-404A-B128-DD01509AE6EA
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 262150 sectors (128.0MiB)
Number Start (sector) End (sector) Size Code Name [Additional Info]
1 * * 200.0MiB EF00 EFI System Partition rEFInd currently installed here, mounts to /boot/efi
2 * * 185.8GiB AF00 OSX
3 * * 619.9MiB AB00 Recovery HD
4 * * 93.1GiB AF00 DMZ unjouranaled HFS+ shared partition
5 * * 4.0GiB 8200 Arch Swap
6 * * 128.0MiB 8300 Arch Boot ext2
7 * * 50.0GiB 8300 Arch Root ext4
8 * * 131.8GiB 8300 Arch Home ext4
And my fstab, made with genfstab after I mounted everything (except for the swap stanza, which I had to write):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427
/dev/sda7 / ext4 rw,relatime,data=ordered 0 1
# UUID=efb41f69-6f99-4c8b-8431-01f3cd22c9cc
/dev/sda6 /boot ext2 rw,relatime 0 2
# UUID=67E3-17ED LABEL=EFI
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed, errors=remount-ro 0 2
# UUID=[another long UUID]
/dev/sda8 /home ext4 rw,relatime,data=ordered 0 2
# UUID=[another long UUID] LABEL=DMZ
/dev/sda4 /dmz hfsplus rw,relatime,unmask=22,uid=0,gid=0,nls=utf8 0 0
# UUID=[another long UUID]
/dev/sda5 swap swap defaults 0 0
Last edited by rjmh (2014-04-04 08:35:20)

henriqueleng wrote:
I don't know about Mac computers but i use a uefi motehrboard,
To install it i created a partition with 512MB and i mounted /boot on there. all the rest of system are normal.
I use gummiboot, i don't know if its stuff on Mac. I think that ou should try another bootloader!
And why do you mounted two point on /boot?
/boot and /boot/efi?
Are you sure you're using uefi, my fstab looks just like his with the boot and efi partition. I'm pretty sure that's how the wiki says to set it up. That's the fstab for a laptop with uefi if it helps you out. I had problems with grub btw, so I had to set up gummiboot
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb3
UUID=0c1c97a3-0472-4141-a756-a03c00a4a3cf / ext4 rw,relatime,data=ordered,discard 0 1
# /dev/sda3
UUID=8a4412fa-5d4b-4de4-91ff-a4d05b3705e1 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sdb2
UUID=971ed3e8-394d-46b3-b0d4-e8bb86b267cf /boot ext4 rw,relatime,data=ordered,discard 0 2
# /dev/sdb1
UUID=095C-CB43 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda1
UUID=12a4a2b1-6338-495a-8a41-474653eb227b /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=846803f1-3f5b-48ae-9945-37e9725011b2 none swap defaults 0 0

Arch 0.7 install of xorg....corrupted(weird solution)

Similar Messages

Maybe you are looking for