Arch 2007.8 installation - configure system
i cannot install archlinux 2006.6 because of this issue) so i am trying with arch 2007.08..
when i've set the mountpoints, selected packages, installed packages, i am going to configure system part and the installation shows me configuration files, which are completely empty!
what does it mean? when i want to set root password it gives me "unable run command 'passwd' no such file or directory" when i want to setup grub, i get "cannot find /mnt/boot/grub/stage1"
what should i do? i have read the wiki and it wasn't helpful in this case.. i though the installer generates those configs, or am i wrong?
Last edited by Daan (2009-01-05 01:33:38)
iBertus: i see.. so it doesn't matter which version i would install, pacman -Syu will synchronize with currtent repositories and will upgrade everything from there, right?
i just started to read the main and the most important articles on arch wiki and i must say it's written really great. thank you for your hints.
but if someone would have an idea about those configuration files, during the installation, i would appreciate it, because i would like to understand it and find out where's the problem..
also, there should be something done (from deweloper's side) about that issue i wrote in my first post..
Similar Messages
-
Configuration system failed to initialize
Getting error when I try to install an excel addin that I have published.
Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
To publish the addin I use the publish option on the build menu of VS2013.
Specify the location to publish this application: F:\publish where F: is a USB drive.
What is the default installation path on end user computers: From a CD-ROM or DVD-ROM
Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error. I copy the entire publish directory to the C: drive of the target system and get the same error.
What am I doing wrong?
thanks,Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
"Configuration system failed to initialize" when trying to connect FM12 to Sharepoint
Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize". I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error. The PC (which is actually a VM) is running Windows Server 2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied. FM12 is installed as part of Technical Comms Suite 5 subscription.
Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Satellite L675 is locked in a loop of "configuring system"
I have a Satellite L675 pre-loaded with Windows7 64-bit, because it was very slow so I decided to recovere it to the factory default out-of-box.
But it has now been locked in a loop of "configuring system" with several reboots for more than an hour - does that make any sense?
Regards,Hello
The recovery process takes a very long time and your notebook will restart several times during this process. A lot of drivers and tools will be installed so its not unusual.
In my opinion you should wait a little bit longer until recovery installation finished successfully. Just relax during this time with newspaper and coffee ;) -
Pop-up 'Another instance is running. Configuration system failed to initialize.'
Hello - my system kept 'freezing' when a pop-up saying, ' Silverlight Plug-in has crashed' with options to repair or close. No matter what I did, t happened several times an hour, as well as the page and pointer freezing just as frequently. Often the only solution was to turn off the computer with the on/off button. Someone at work told me to delete the plug-in and I did and the problem stopped for a few days. Now, the plug-in has reappeared on the notebook, but less frequently, and the a/n pop-up comes on when I start the notebook. I suspect this action is related to what I unsuccessfully deleted. My screen and pointer are freezing less often. I appreciate opinions on how to correct this darned annoying problem.
Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
SolMan 4.0 Install fails at Configure System Landscape Directory
Hi
We are installing Solution Manager 4.0 on AIX 5.2 and DB2 8.2.4. At step 56 (Configure System Landscape Directory phase) the install fails with the following error:
TYPE=A<BR>STATE=503<BR>INFO_SHORT=Error connecting to
http://sapibm7:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SLDConfig;IMPORT_SLD_CONTENT;FILENAME=/usr/sap/SOL/SYS/global/sld/model/CR_Content.zip,HOST=sapibm7,PORT=50100,SLDUSER=J2EE_ADMIN,SLDPASSWORD=des19(92|18|146|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked. <BR>CONFIGURATION=
The user J2EE_ADMIN can logon to via the gui to client 001 without errors.
Any help would be appreciated.
Thanks
SamHi Sam,
Seems this is a typical problem with SAP J2EE /AddIn Installations (I had this often!!). The user is created in the J2EE user store but because his password is initial, the J2EE engine would not let him in. As I remember the installation tries to log on with user SLDDSUSER (or so, something with SLD...), so log on on to the J2EE Engine with this user (e.g http://<hostname>:<port>/useradmin) and you will be prompted to that your password is initial (also do this with user J2EE_ADMIN, always good idea to see that J2EE Engine works correctly). In most cases the configuration of the SLD will continue.
If this doesn't work, cancel the installation and configure the SLD manually (is no problem, because at that point of the installation procedure, the system is fully installed, except the SLD configuration).
Hopes this helps.
Regards
Daniel -
Hello Everyone,
I'm trying to solve this probleme for 1 month now.
Problem :
I'm trying to install the 30 days trial Premiere Elements 9 on my system : Win XP SP3 - with Windows Installer 4.5 (enough RAM/Disk space etc...)
Each time, I double click on the " SET UP.EXE", the install stops just after the language choice window, finishing its process by showing a Windows Installer configuration window providing unuseful information like this (it is in French) :
"Windows ® Installer version 4.5.6001.22159
msiexec /Option <Paramètre requis> [Paramètre facultatif]
Options d'installation
</package | /i> <Produit.msi>
Installe ou configure un produit
/a <Produit.msi>
Installation administrative - Installe un produit sur
le réseau
/j<u|m> <produit.msi> [/t <Liste de transformations>]
[/g <ID de langue>]
Publie un produit - m pour tous les utilisateurs,
u pour l'utilisateur actuel
</uninstall | /x> <Produit.msi | Code produit>
Désinstalle le produit
[...ETC.............]"
The windows has a "OK" button : I click on it and then the installation stops here without any other message. Everytime.
I tried to resolve the problem by checking/modifying windows installer services process in Win XP, running Windows Clean up utilities, Ccleaner etc..
No way, still the same.
For information, Photoshop Elements 9 trial installation worked on my computer..
Please help if you can.
Regards,
MBPHi Bill,
I'm finally back...and as I thought, free space does not seem to be the problem.
Here are the specs of my computer :
Microsoft Windows XP Professionnel
Processeur central
Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
Nom d'utilisateur
Administrateur
Graphisme
Adaptateur vid閛
ATI Radeon HD 4600 Series
M閙oire vid閛
512,00 MB
R閟olution d'閏ran
1280 x 1024
Stockage
M閙oire totale
2,00 GB
M閙oire libre
1,15 GB
Disque dur : total
668,51 GB
Disque dur : libre
486,45 GB
Operating System
Syst鑝e Informatique
Nom de l'ordinateur
ORDI-XPSP2
Nom d'utilisateur
Admin
Organisation
XPSP2
Syst鑝e d'exploitation
Nom
Microsoft Windows XP Professionnel
Version
5.1.2600
ServicePack
3.0
Dur閑 de fonctionnement
10/07/2011 12:04:30
Version d'Internet Explorer
8.0.6001.18702
Version de Microsoft DirectX
4.10.0.5515
Version d'OpenGL
5.1.2600.5512 (xpsp.080413-0845)
Base de registre
Taille maximum
120 MB
Taille actuelle
6 MB
Etat
OK
I have more thant 150 GB free on C:// ...
But always the same issue... install stops just after language choice.
Please help me !
Regards
MBP06 -
Portal30 Installation/configuration problems.
Subject: Portal30
Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
I am facing problem in its installation on WINDOWS 2000 server.
The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
Any way I removed all the entries from the registry and also removed the directories from the disk.
When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
loading org/w3c/dom/html/HTMLHeadingElement
Error while loading
org/w3c/dom/html/HTMLHeadingElement
ORA-29506 invalid query derived from using clause.
ORA-00942 table or view does not exist.
Error while accessing MD5 table.
When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
call to WPG_SESSION failed.
error code 4068
Database login failed. TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listeneing.
The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
I am unable to configure my PORTAL30..Please help...or where can I get the solution...
Thanks with regards
Riant.
nullSubject: Portal30
Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
I am facing problem in its installation on WINDOWS 2000 server.
The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
Any way I removed all the entries from the registry and also removed the directories from the disk.
When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
loading org/w3c/dom/html/HTMLHeadingElement
Error while loading
org/w3c/dom/html/HTMLHeadingElement
ORA-29506 invalid query derived from using clause.
ORA-00942 table or view does not exist.
Error while accessing MD5 table.
When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
call to WPG_SESSION failed.
error code 4068
Database login failed. TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listeneing.
The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
I am unable to configure my PORTAL30..Please help...or where can I get the solution...
Thanks with regards
Riant.
null -
Installation & configuration SRM MDM Catalog 3.0
Hello Everybody
I have SRM 7.0 ABAP & SRM 7.0 Java installed with different SID's.
Can anybody please tell me step by step installation & configuration SRM MDM Catalog 3.0 ?
I have referred note 1177779 & 1177780 .
Thanks,
PRYou can get it here:
https://sapmats-de.sap-ag.de/download/download.cgi?id=TX7G1TDRAETSXTLIICWNYGBHG9751YVJKY3NPP9WL9PEEZIXG5
The password for the file is:
TryMe1st -
Clean installation of system 7.1 on Macintosh SE/30 ?
Could someone please advise how to do a clean installation of System 7.1 on my old Macintosh SE/30 ?
It used to run 6.0.5, I have done an upgrade to 7.1 , but I think I have somehow messed it up.
For instance , the Apple menu is empty.
It still boots fine, and I can read floppies.
I did google a bit, but didn't find any step-by-step instructions how to do the clean installation.
I've got the floppies Install 1 & 2, Tidbits, Printing, Fonts, Disk Tools.
Could some kind soul please advise?
(I've got Macbook's , but I am not really familiar with the vintage Macintoshes.)Would it be correct to assume that you have the (more common) 1.44 MB System 7.1 floppies (HD diskettes)?
If you do not wish to keep anything of the existing hard disk contents (and if you have backup copies of systems and applications that you want to install), you could simply boot the computer from a Disk Tools floppy and then use Apple HD SC Setup to initialise (format/erase) an Apple hard drive. If the internal hard drive is not an original Apple drive, or if an Apple drive had been reformatted by another program, a modified/special startup floppy with a third-party formatting utility would be needed instead. Thereafter, start up from the System 7.1 Install 1 disk and carry out a fresh installation.
BTW, the floppy drive is first in the boot order, so a Macintosh SE/30 should start from a (bootable) diskette even if the hard disk contains a system. If there is a problem doing this, one can try holding down the four keys Command(Apple) + Option + Shift + Delete(Backspace).
Since old system floppies become unstable with time, it is a good idea to create a set of sector-copied backup disks. The typical application for this would be Disk Copy 4.2. This program was earlier available from Apple, but the older software downloads list is not there any more. A Disk Copy 6.3.3 page can still be found, though.
http://support.apple.com/kb/DL1262
Jan -
Computer shut down during "Toshiba configuring system"
I did see a similar thread, but I didn't want to hijack it and my questions are a little different.
So first of all, I reformatted the computer to "out of box" factory settings because I had a virus, the virus can't get into this hidden partition right? (it was antispyware soft if that matters)
2.I closed the lid of my computer while it was doing the toshiba configuring system thing, and I'm on it now and everything SEEMS fine, but did that driver or whatever actually get installed? Will something go wrong down the road? Should I just do another reformat?
Thanks!Shutting the lid down might have caused interruption on the process for the recovery.
But for "Configuring system", it may take multiple restarts because according to what Ive searched, the computer restarts upon completion of a software and do the same thing over and over until everything is installed.
oOo
*Read EULA before installing any software.
√ -
Need Post installation configuration guide for PI 7.0
Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
VinodHI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla -
Steps for ESS MSS installation,Configuration
Hi all,
I am having an experience of six months in sap ep(enterprise portal)
and web dynpro for java.
In the next month iam required to install ess and mss buisness package completly from start.
I have an basic knowledge of ess mss which i got by reading material from sdn library.
Can any one help me with the steps required for the installation ,configuration and customization of ess mss package.Also
I need an information about installation ,configuration and customization of various webdynpro application in ess mss package
Please help me with the steps,it is very urgent.
Full points will be rewarded for answers.(BIBLE) - Employee Self-Service (ESS) Applications
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6a/5bc8a009d54fcaa8e06c826a57253b/frameset.htm
What is ESS
Employee Self-Service or ESS is a web-based solution designed to automate many of the repetitive tasks of the HR function
by allowing employees direct access to HR information and services. The basic idea of ESS is that employees are empowered to be responsible for their own personal information.
Benefits:-
One of the major reason for organizations implementing ESS is that it allows HR professionals to spend less time in administrative tasks like paper filing,
attendance monitoring etc and more time dealing with more complex and strategic HR issues.
The Gartner Group had estimated that 40 percent of traditional HR activities were handled by ESS in the year 2000 and this can only increase over time.
You can learn about ESS and its features and also Business Package details from:-
ESS Document:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
What is ESS(Must See):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4598a190-0201-0010-a59f-820e3b31f854
ESS Blog:
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erphcm/employeeSelfService&
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Manager Self-Service
http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
Employee Self-Service
http://help.sap.com/saphelp_erp2004/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
to customize in r3
Cheer!!
SJ. -
How to configure System landscape in server for Enterprise portal.
Hi all,
I want use BI sdk to connect to SAP BW.I want to do it using portal iview.So i have logged in to the portal. But when i click on System Administration and then on System configuration then it is saying that error on the page. I think i need to configure System land scape.How to do it.
Regards,
Kiran.Hi Bhogi,
You have to go to system administration --> system configuration --> system landscape.
Then create a system.
Regards
Arun -
Re: Toshiba Configuring System
this is for windows vista:
let the Configuring System run a few times... who knows what its doing...
on the 5th or 6th time the computer reboots and config setup is running hit "windows key" to bring up start bar. right click on "scripts" icon running in the system tray and exit the running script
remove b1.exe from startup
reboot.
the only thing that remains is a "sys prep" utility. i could not find a way to stop this from running everytime the computer reboots, BUT, you can simply cancel the process and it goes away.
if anyone finds a way to remove this "sysprep" exe, please reply to this post.
thxI have been using computers for 20 years now and had come to regard Toshiba laptops as very special machines. Now that I have one and am trying to use the 5 DVD recovery media, it feels like Toyota is completely absent from their obligations to their customer.Where is a Toshiba moderator? It's as if this company is being run like a kid runs a lawn mowing business - a very dumb kid. Toshiba needs to give me a reason why I should ever bother with this brand. It is the worst service and support that I have ever seen on the Internet.
Maybe you are looking for
-
App Downloads to more than 1 playbook
how do I purchase an app for one of my playbooks but download to all three I own. Each Playbook is bridged to three different phones. All phones are connected to one wireless billing account
-
Remove Value Field from Operating Concern
Hi all, I created a new value field in DEV and assigned it to the corresponding Operating Concern. Now, after some discussions, it is not necessary this value field. I want to "un-assign" from the Operating Concern they use. No data is being posted t
-
Newb needs help opening file browser and getting full file name and path.
Ok, so I'm a TOTAL newb here, but I have managed to get it to open a file browser but all I can seem to get it to do is give me the NAME of the selected file *eg. selectedFile.name* I also need the path of the file as in C:\example\file.mp3. The prog
-
Count statement for fields greater than 10 characters
Hi, I am trying to write a query to select results from a database table where the results are only fields greater than 10 characters in length. e.g. Table Employee---- Andrew Jennifer Smith Jamal the query would only show the result Jennifer Smith b
-
Quicktime playback not in browswer window.
Help. When I click a link on a site that points to an .mov the file is played back inside the safari window. Is it possible to have safari launch the file in quicktime player instead of playing inside a window? I find this annoyning because I want to