Arch doesn't boot up after Windows Update on Surface Pro 3
Hi all,
I am using a Microsoft Surface Pro 3. I have a persistent installation of Arch on a USB drive. It works very well on the Surface. The only problem I am facing is, whenever I run Windows Update, I am not able to boot from the USB Arch installation after that. It just guides me to the BitLocker recovery page. The only way to boot from the USB drive is to install GRUB on the EFI partition again. It'll work until the next Windows Update, but then again the same thing repeats itself. I am stumped as to how to resolve this.
Disabling BitLocker doesn't work too, as the system then boots straight into Windows instead of going to the BitLocker recovery page.
parag14 wrote:Would efibootmgr help in any way?
You can check the boot order by using:
efibootmgr
You can set the boot order using:
# efibootmgr -o xxxx,yyyy,zzzz
Replace the letters with the bootnumbers given by the first command.
You can probably use this method to reset Arch at the top of the list rather than re-installing GRUB.
Similar Messages
-
Lenovo G780 will not boot up after windows update
My friend's G780 will no longer boot up after installing a windows update, one for which she cant remember, and ever since she updated it, the lenovo boot screen will appear, then turns black, and stays black. It will, occasionally, give her the option to go to the "windows did not boot properly" screen, giving her options to refresh the pc, restore the pc, advanced options, etc.
Changing boot priorities, using "repair" did not work, and neither did trying to find a system image.
She is unsure what to do, and I am as well.
Any recomendations?hi connorjacob,
Thanks for Posting!
If you can try and get the screen again where it gave you options like Refresh PC, Restore the PC and Advanced option.
Choose Advanced option to pull up a new page with options
With the options, You can try:
Try Selecting System Restore and see if you can find a restore point prior to to insalling the said updates.
Select Windows Start up Settings and Find two options that can help
- Boot to Safe Mode (See if the computer boots in safe mode)
- Last Known good configuration
Let me know your findings
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Macbook doesn't boot up after mavericks update
updated my macbook to the new OS and it said shutting down for a restart. never restarted and now i can't even turn on. no power up. no boot up.
parag14 wrote:Would efibootmgr help in any way?
You can check the boot order by using:
efibootmgr
You can set the boot order using:
# efibootmgr -o xxxx,yyyy,zzzz
Replace the letters with the bootnumbers given by the first command.
You can probably use this method to reset Arch at the top of the list rather than re-installing GRUB. -
Dell Latitude E6520 fails to boot after Windows Updates
Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Wont boot after windows update
M y Sateite A305 s6916 wont boot after windows updates tried to install.
Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
Startup Repair: frequently asked questions
Also try a System Restore.
What are the system recovery options in Windows Vista?
-Jerry -
[SOLVED] UEFI-System doesn't start anymore after rEFInd update
Hi there,
got some problem with my UEFI system after todays update of refind-efi: Arch doesn't boot anymore
What have I done:
At first I did a
$ sudo pacman -Syu
During the update I was presented with the usual information concerning copying some files from /usr/lib/refind/*. So I did this:
$ sudo cp /usr/lib/refind/refind_x64.efi /boot/efi/EFI/refind/refind_x64.efi
Than I did:
$ sudo cp /usr/lib/refind/config/refind.conf /boot/efi/EFI/refind/refind.conf
$ sudo cp -r /usr/share/refind/icons /boot/efi/EFI/refind/icons
After that I rebooted my computer and was presented with an "Asrock" writing that doesn't change to the rEFInd-screen as it should.
Question: What can I do now? (And what did I wrong?)
Last edited by swordfish (2013-01-11 17:01:54)Hi Rod,
thanks for your quick answer !
Ok, you write:
srs5694 wrote:
The 0.6.3 package changes the name of the rEFInd binary from refindx64.efi to refind_x64.efi. This is done because the official rEFInd release uses the latter name, and it includes support scripts that work correctly only if that name is used. Thus, if you deleted your old binary and copied the new one in place without renaming it to the old name, it would stop working, since the NVRAM entry would still point to the old name. There are two solutions:
Rename the new binary to the old name (refindx64.efi). If you do this, you'll need to keep doing it in the future or eventually do the next thing. Also, this might not work if your firmware has "helpfully" removed the existing entry. Thus, the next option is probably better...
Use efibootmgr to add a new entry for the new name. The Arch wiki has details on this here and probably elsewhere, too.
Jepp, I've seen the new name "refind_x64.efi". During my attempt to perform a proper install I did what you assume in your first solution - renaming the new binary to the old name (refindx64.efi).
After that my system didn't reboot ...
After that I booted from my USB stick with which I've installed my Arch system. I mounted my system partitions to /mnt, loaded the efivars module and arch-chrooted into the system. From there I copied the new binary from /usr/lib/refind/refind_x64.efi to /boot/efi/EFI/refind/refind_x64.efi and did this:
# efibootmgr -c -g -d /dev/sda -p 1 -w -L "rEFInd" -l '\EFI\refind\refind_x64.efi'
/boot/efi is mounted to /dev/sda1
But even after I did this a reboot only led to the well known green "Asrock" writing - no rEFInd appeared
Using the efi shell I can see that the boot entries seem to be okay.
srs5694 wrote:rEFInd 0.6.3 has a known bug that causes it to crash on some systems. Upgrading to 0.6.4 may be necessary if you're affected by this bug. The usual symptom is a system hang, though, not a return to the firmware menu, so I suspect this isn't the problem. If it is, you can grab the official non-Arch rEFInd package and copy the refind_x64.efi file from it over the one on your ESP.
Hm, seems as if I have to try this ... -
Flash CC doesn't start up after last update
Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems. -
Profiles being reset after windows updates?
Hi All
I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
ThanksHi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Firefox won't start after windows update
After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DKI cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents. -
Hi,
I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
update but still no good.
I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked.
Hotfix
I believe I have all hotfixes mentioned in the forums. Here is the list.
Windows6.1-KB976462-v2-x64
Windows6.1-KB982307-x64
Synchronization
Windows6.1-KB974405-x64
MSChart
SQLSERVER2008_ASADOMD10
381569_intl_x64_zip
Windows6.1-KB976462-v2-x64
Event Viewer
I can see following log in Event Viewer when accessing site home page.
Event ID: 8306
Task Category: Claims Authentication
Level: Error
Website response
http://localhost:32843/ - "HTTP Error 503. The service is unavailable."
http://localhost:32843/Topology/Topology.svc - Works fine
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
-> IIS -> Authentication).
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
Can anyone please help me to fix this issue?
ThanksHi Henrik,
Here is the log info.
<EventID>8306</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>47</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<Execution ProcessID="8436" ThreadID="8812" />
<Channel>Application</Channel>
<Security UserID="S-1-5-20" />
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
I would like to let you know that I am getting following message when accessing the below link. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
and IIS website (SharePoint Web Services -> IIS -> Authentication).
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
Regards -
Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed
Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
Any idea how to resolve this?
Thank you.Hi,
Please make sure that your antivirus application does not scan the files in the
%windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
You can also temporarily turn off the antivirus application and check the result.
Or run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
Yolanda Zhu
TechNet Community Support
I tried the commands as well, still prompting the same error.
Thanks -
several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??
Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile -
Xperia z wont boot up after crash update
Xperia tablet Z won't boot up after latest update, the update crashed half way through. Tried plugging it into the mains, red light comes on and Sony logo keeps appearing and then the screen goes blank.
Red light also keeps going off when screen goes blank, then comes back on.
Battery was approx 75% when update crashed.
Tried the reset by holding the volume up and power key but no avail.Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Blue screen: HP Pavilion dv6 after Windows update on Aug 1.
Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.
I have this problem. It happens without any warning.
I don't know the reason. Please help me. -
2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.
nateshns wrote:
2 finger scroll doesnt work in Finder after Mavericks update.
In any particular app, or all of them?
Maybe you are looking for
-
Hi Everyone, this is going to be a tough one, but please help me. Two days ago, my computer slowed. So I decided to do a system update, but during the update it got stuck, so i hit the reset button. Then the laptop did not want to boot, and would get
-
Aging 7 Buckets Report ARXAGMW error REP-1212 Object Body is not enclosed
Hi I am customising standard AR Aging 7 buckets report by account(ARXAGMW). I just need to add 2 fields,That i have added successfully. But the report output format is not printing properly. I mean if there are 4 columns custname,custno,endcustname,e
-
How to create customized gesture recognizer ?
Hi there, I am currently developing in JavaFX 2.2 a touch-based application requiring some customized gestures. I firstly tried to developed such gestures based on MouseEvent or TouchEvent, but I would like to have them more like "standard" gestures,
-
In design CS2 has it been dumped completely by this awful company
My problem is that Indesign CS2 wont open any longer. I bought it as a bundle and paid a huge sum for the full Creative suite. I was told at the time that I could run a separate copy on my laptop at the time. Later when I tried to do that I found tha
-
Hi experts, For my main window to display an using save_text function module. the problem is the problem is its saving only the current values . if i change the company code its taking the previous values. how to use this save_text. cor