Arch don't detect and automount disks

When I insert a disc nothing happen.
What is the problem?
currently I mount/umount with sudo.

have you tried hal? install it and add it to daemons and it will automount your cd's and portable storage. http://wiki.archlinux.org/index.php/HAL
Last edited by billy (2007-05-23 07:52:00)

Similar Messages

My iMac cannot detect the Hard Disk

Hi, i've got a question...
Something is wrong with my new iMac. Somedays (only somedays) my iMac cannot detect the hard disk, so when I startup it stops on the initial screen (whit a gray "apple" and background). I tryed to startup it with OSX system discs but the installation app and disk utility don't detect any Hard Disk.
At an authorized store have said to me that can be a software problem...
Is that true? I thought that was a hardware problem.
Thanx,
Eneko
iMac 17"/2.0GHz Intel Core 2 Duo/1GB 667 DDR2 SDRAM/160GB Serial ATA Mac OS X (10.4.8)

Given the young age of you machine I believe you should be taking Apple to task on this one. I'd advise you back-up your data to multiple locations before you go any further.
mrtotes

I have an iPhone 3gs (iOS 5.1) with BB 6.15 (the lastest) and it don't detect my SIM

I have an iPhone 3gs (iOS 5.1) with BB 6.15 (the lastest) and it don't detect my SIM and I don't know what to do (I have unistalled all, and installed the lastest iTunes software)

Maybe your iPhone was hacked/jailbroken to use another carrier?
If so, now it locks back to the original carrier.

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

iPhone, iPad, or iPod touch not appearing in iTunes

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have a an imac with Lion OS x software 10.7.5. The built in DVD player will no longer play dvd;s and it says its an unsupported disc. I have done a risk disk permissions and verify disk and both say ok

I have a an imac with Lion OS x software 10.7.5. The built in DVD player will no longer play dvd's and it says its an unsupported disc. I have done a risk disk permissions and verify disk and both say ok.
I haven't changed any settings regarding region codes

You may have run discs from different regions,these would be commercial DVDs. If so most DVD players need to be told what region the disc is from. Have you done this by chance, if you are not sure look at the region numbers listed on the commerical DVDs you have and see if some use different numbers.

I use CS5 and all of a sudden I am getting a notification that says there is an error with my icons. It's telling me to contact support or reinstall. The problem is I don't know where my disks are to re-install. Any suggestions?

I use CS5 and all of a sudden I am getting a notification that says there is an error with my icons. It's telling me to contact support or reinstall. The problem is I don't know where my disks are to re-install. Any suggestions?

doodlebug,
Am I just out of luck until I find those?
You may try Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
and talk to them about your registration, but I am unsure whether they can help you with anything pre CC (There was a Customer Care option with chat which seems to have stopped working).
If you are still out of luck, please report back, and I will try to ask someone to find the right someone to help you.

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

I have the same problem.
I also need both devices to detect each other because some software like scrabble require the bluetooth connection so play. I am also using Conference and Remote (recommended by Apple!) which are also able to use the bluetooth connectivity

Using onestep dvd form movie (which I have done, successfully, many time before but now, the comuter ejects the disk 5 minutes before it is finished, and teh disk is blank, any thoughts anyone?mes before

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them.

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them from Apple or if I buy them off ebay will they work? Also its A Macbook Pro 2008 15 inch glossy with 2GB of Ram the serial number is worn off what kind OS do I need?

Wondering if there was a way to purchase them from Apple
Yes. Contact Apple Support using one of the options in the Contact Us below. You will need your MBP's serial number and payment method for a nominal fee. If the exterior serial number is illegible look elsewhere for it: MacBook Pro: How to find the serial number
or if I buy them off ebay will they work?
Probably not. Grey discs are system-specific and will work only for the exact model MBP with which they shipped. It's likely that Apple will charge you less money, and it will be guaranteed to work.

My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

Hi
My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
How can I back up my files before reformatting when I can't even open the drive's folder?
Thanks for the help.

I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
Exactly this was the way I USED to make restores of files and photos..
but know I CANT!!!!
When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
PLEASEE!!! Help me!!

"Conflict Detected" and/or "Changed on Disk" immediately after saving

My setup:
I've got a workstation and a laptop (Win 7 x64) that I use Lightroom 4.1 on both. When files are imported, they are saved to a Windows 2008 (x64) server that I have so that I can work from either machine. Everything is connected via gigabit ethernet.
The problem:
Both installations of LR4.1 are set to save metadata immediately, however, this never seems to happen. A conflict or change always seems to be detected and I have no clue why. This means that my catalog ends up being the only place the changes are kept unless I manually save the metadata and overwrite the changes (which may write the changes, but the files seem to pop back up immediately as conflicted). This is NOT a problem because I'm using two machines, the problem exists whether I'm using just my workstation with the laptop powered off.
Things I've tried that haven't helped:
The server is on a UPS so I have disabled write-cache dumping to ensure as fast as possible access.
Disabled AV from read/writing to these files and white listed Lightroom all together.
Disabled NTFS Last Access updating.
I switched from using .nef and .xmp sidecar files to using a straight DNG workflow.
I've monitored file access via "Process Monitor" and can confirm nothing but Lightroom and system processes are touching the files on the client and server.
I've tried enabling and disabling local network file caching (very useful if I can get it working on the laptop, because I can import into LR4.1 while I'm away from the server and it will automatically sync when my laptop is back on the same LAN as my server).
Any ideas?

Ive just been looking for the same. Theres an article (and a class) on javaworld on subject of saving bitmap-files, and in another thread in this forum, a guy described how to make jpg. with the jdk1.4 .... Like this:
int w = comp.getWidth();
int h = comp.getHeight();
BufferedImage im = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
Graphics2D g2 = im.createGraphics();
comp.paint(g2);
g2.dispose();
ImageIO.write(im, "jpeg", new File("foo.jpeg"));
im.flush();
Im just referring, havent tried it yet. Good luck.
Stig.

Arch does not detect /dev/sdb

HI everybody,
Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
I've searched around Google and the forums and I've doesn't found any helpfull tip.
The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
Here's some outputs that may be useful:
sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador del disco: 0x8370a3d6
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
/dev/sda3 1435379712 1953525167 259072728 5 Extendida
/dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
/dev/sda6 * 1437339705 1827960116 195310206 83 Linux
/dev/sda7 1827960180 1953525167 62782494 83 Linux
ls -lat /dev/sd*
brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Intel Corporation Device 0036
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: mei
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ata_generic
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
Subsystem: Intel Corporation Device 0037
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: snd_hda_intel
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Thanks for the help!

I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
The configuration on the BIOS:
ATA/IDE Mode -> Native
Configure Storage as -> IDE
It doesn't show more valuable information except for the location of any drive on any SATA port.
dmesg output, it can be useful for someone:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
[ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
[ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000df61bf40 00040
[ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
[ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
[ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
[ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
[ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
[ 0.000000] On node 0 totalpages: 2061655
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
[ 0.000000] Normal zone: 18176 pages used for memmap
[ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
[ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
[ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
[ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
[ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
[ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
[ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
[ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
[ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
[ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3324.877 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003590] Mount-cache hash table entries: 256
[ 0.003783] Initializing cgroup subsys cpuacct
[ 0.003786] Initializing cgroup subsys memory
[ 0.003793] Initializing cgroup subsys devices
[ 0.003794] Initializing cgroup subsys freezer
[ 0.003796] Initializing cgroup subsys net_cls
[ 0.003797] Initializing cgroup subsys blkio
[ 0.003818] CPU: Physical Processor ID: 0
[ 0.003819] CPU: Processor Core ID: 0
[ 0.003824] mce: CPU supports 9 MCE banks
[ 0.003833] CPU0: Thermal monitoring enabled (TM1)
[ 0.003840] process: using mwait in idle threads
[ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003958] Freeing SMP alternatives: 16k freed
[ 0.004816] ACPI: Core revision 20120913
[ 0.007720] ftrace: allocating 18793 entries in 74 pages
[ 0.015109] Switched APIC routing to physical flat.
[ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.154178] ... version: 3
[ 0.154179] ... bit width: 48
[ 0.154180] ... generic registers: 4
[ 0.154181] ... value mask: 0000ffffffffffff
[ 0.154182] ... max period: 000000007fffffff
[ 0.154182] ... fixed-purpose events: 3
[ 0.154183] ... event mask: 000000070000000f
[ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.227213] Brought up 4 CPUs
[ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
[ 0.229378] devtmpfs: initialized
[ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
[ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
[ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
[ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
[ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
[ 0.231092] RTC time: 21:05:23, date: 02/03/13
[ 0.231127] NET: Registered protocol family 16
[ 0.231227] ACPI: bus type pci registered
[ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.236542] PCI: Using configuration type 1 for base access
[ 0.236958] bio: create slab <bio-0> at 0
[ 0.237003] ACPI: Added _OSI(Module Device)
[ 0.237005] ACPI: Added _OSI(Processor Device)
[ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237812] ACPI: EC: Look up EC in DSDT
[ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240820] ACPI: Dynamic OEM Table Load:
[ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
[ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241020] ACPI: Dynamic OEM Table Load:
[ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241360] ACPI: Interpreter enabled
[ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.241374] ACPI: Using IOAPIC for interrupt routing
[ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244856] ACPI: No dock devices found.
[ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.245005] PCI host bridge to bus 0000:00
[ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
[ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
[ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
[ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
[ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
[ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
[ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
[ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
[ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
[ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
[ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
[ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
[ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
[ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
[ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
[ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
[ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
[ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
[ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
[ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
[ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
[ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
[ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
[ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
[ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
[ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
[ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
[ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
[ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
[ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
[ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250606] vgaarb: loaded
[ 0.250607] vgaarb: bridge control possible 0000:01:00.0
[ 0.250627] PCI: Using ACPI for IRQ routing
[ 0.252814] PCI: Discovered peer bus 3f
[ 0.252815] PCI: root bus 3f: using default resources
[ 0.252815] PCI: Probing PCI hardware (bus 3f)
[ 0.252831] PCI host bridge to bus 0000:3f
[ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.253005] PCI: pci_cache_line_size set to 64 bytes
[ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
[ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
[ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
[ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.253125] NetLabel: Initializing
[ 0.253126] NetLabel: domain hash size = 128
[ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253137] NetLabel: unlabeled traffic allowed by default
[ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.255164] Switching to clocksource hpet
[ 0.258533] pnp: PnP ACPI init
[ 0.258548] ACPI: bus type pnp registered
[ 0.258610] pnp 00:00: [bus 00-ff]
[ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258618] pnp 00:00: [mem 0x00000000 window]
[ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.259007] pnp 00:03: [irq 4]
[ 0.259008] pnp 00:03: [dma 0 disabled]
[ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.259277] pnp 00:04: [io 0x0378-0x037f]
[ 0.259279] pnp 00:04: [io 0x0778-0x077f]
[ 0.259283] pnp 00:04: [irq 5]
[ 0.259284] pnp 00:04: [dma 3]
[ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.259389] pnp 00:05: [dma 4]
[ 0.259390] pnp 00:05: [io 0x0000-0x000f]
[ 0.259391] pnp 00:05: [io 0x0081-0x0083]
[ 0.259392] pnp 00:05: [io 0x0087]
[ 0.259394] pnp 00:05: [io 0x0089-0x008b]
[ 0.259395] pnp 00:05: [io 0x008f]
[ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
[ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.259413] pnp 00:06: [io 0x0070-0x0071]
[ 0.259418] pnp 00:06: [irq 8]
[ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259437] pnp 00:07: [io 0x0061]
[ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.259459] pnp 00:08: [io 0x0010-0x001f]
[ 0.259460] pnp 00:08: [io 0x0022-0x003f]
[ 0.259462] pnp 00:08: [io 0x0044-0x005f]
[ 0.259463] pnp 00:08: [io 0x0062-0x0063]
[ 0.259464] pnp 00:08: [io 0x0065-0x006f]
[ 0.259465] pnp 00:08: [io 0x0072-0x007f]
[ 0.259466] pnp 00:08: [io 0x0080]
[ 0.259467] pnp 00:08: [io 0x0084-0x0086]
[ 0.259468] pnp 00:08: [io 0x0088]
[ 0.259469] pnp 00:08: [io 0x008c-0x008e]
[ 0.259471] pnp 00:08: [io 0x0090-0x009f]
[ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.259513] pnp 00:09: [irq 13]
[ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
[ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
[ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
[ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.259892] pnp: PnP ACPI: found 12 devices
[ 0.259893] ACPI: ACPI bus type pnp unregistered
[ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
[ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.266492] NET: Registered protocol family 2
[ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.269063] TCP: reno registered
[ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269211] NET: Registered protocol family 1
[ 0.315053] pci 0000:01:00.0: Boot video device
[ 0.315082] PCI: CLS 64 bytes, default 64
[ 0.315125] Unpacking initramfs...
[ 0.353156] Freeing initrd memory: 2804k freed
[ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
[ 0.353859] audit: initializing netlink socket (disabled)
[ 0.353875] type=2000 audit(1359925523.249:1): initialized
[ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.364275] VFS: Disk quotas dquot_6.5.2
[ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364442] msgmni has been set to 15695
[ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.364676] io scheduler noop registered
[ 0.364678] io scheduler deadline registered
[ 0.364713] io scheduler cfq registered (default)
[ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.364910] vesafb: scrolling: redraw
[ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
[ 0.452482] Console: switching to colour frame buffer device 160x50
[ 0.539642] fb0: VESA VGA frame buffer device
[ 0.539651] intel_idle: MWAIT substates: 0x1120
[ 0.539652] intel_idle: v0.4 model 0x25
[ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.539700] GHES: HEST is not enabled!
[ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
[ 0.581313] Linux agpgart interface v0.103
[ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.594726] mousedev: PS/2 mouse device common for all mice
[ 0.594777] rtc_cmos 00:06: RTC can wake from S4
[ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.595018] cpuidle: using governor ladder
[ 0.595079] cpuidle: using governor menu
[ 0.595112] drop_monitor: Initializing network drop monitor service
[ 0.595172] TCP: cubic registered
[ 0.595242] NET: Registered protocol family 10
[ 0.595362] NET: Registered protocol family 17
[ 0.595369] Key type dns_resolver registered
[ 0.595570] PM: Hibernation image not present or could not be loaded.
[ 0.595576] registered taskstats version 1
[ 0.596120] Magic number: 1:939:94
[ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
[ 0.597300] Freeing unused kernel memory: 812k freed
[ 0.597412] Write protecting the kernel read-only data: 8192k
[ 0.599884] Freeing unused kernel memory: 1248k freed
[ 0.601056] Freeing unused kernel memory: 476k freed
[ 0.606451] systemd-udevd[57]: starting version 197
[ 0.624469] SCSI subsystem initialized
[ 0.625159] ACPI: bus type usb registered
[ 0.625179] usbcore: registered new interface driver usbfs
[ 0.625187] usbcore: registered new interface driver hub
[ 0.625823] ACPI: bus type scsi registered
[ 0.625865] usbcore: registered new device driver usb
[ 0.625875] libata version 3.00 loaded.
[ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
[ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.627806] scsi0 : pata_acpi
[ 0.628229] scsi1 : pata_acpi
[ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
[ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
[ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 0.633159] scsi2 : pata_acpi
[ 0.633673] scsi3 : pata_acpi
[ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
[ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
[ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
[ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.647467] hub 1-0:1.0: USB hub found
[ 0.647471] hub 1-0:1.0: 2 ports detected
[ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
[ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.660928] hub 2-0:1.0: USB hub found
[ 0.660932] hub 2-0:1.0: 2 ports detected
[ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.803079] ata1.01: no PIO support
[ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.076944] hub 1-1:1.0: USB hub found
[ 1.077141] hub 1-1:1.0: 6 ports detected
[ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.306076] hub 2-1:1.0: USB hub found
[ 1.306284] hub 2-1:1.0: 8 ports detected
[ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
[ 1.351799] Switching to clocksource tsc
[ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[ 5.935629] ata1.01: no PIO support
[ 5.935631] ata1.01: disabled
[ 5.951315] ata1.00: configured for UDMA/100
[ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 6.120503] ata2.01: no PIO support
[ 11.257635] ata2.01: no PIO support
[ 11.257639] ata2.01: disabled
[ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
[ 11.422293] scsi4 : ata_generic
[ 11.422400] scsi5 : ata_generic
[ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
[ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
[ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.775078] usbcore: registered new interface driver usbhid
[ 11.775081] usbhid: USB HID core driver
[ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
[ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
[ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.159230] systemd[1]: Starting Remote File Systems.
[ 13.159238] systemd[1]: Reached target Remote File Systems.
[ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.159298] systemd[1]: Starting Encrypted Volumes.
[ 13.159306] systemd[1]: Reached target Encrypted Volumes.
[ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.159472] systemd[1]: Starting udev Kernel Socket.
[ 13.159488] systemd[1]: Listening on udev Kernel Socket.
[ 13.159519] systemd[1]: Starting udev Control Socket.
[ 13.159537] systemd[1]: Listening on udev Control Socket.
[ 13.159543] systemd[1]: Starting Swap.
[ 13.159550] systemd[1]: Reached target Swap.
[ 13.159556] systemd[1]: Starting Journal Socket.
[ 13.159589] systemd[1]: Listening on Journal Socket.
[ 13.159600] systemd[1]: Started File System Check on Root Device.
[ 13.159605] systemd[1]: Mounting Temporary Directory...
[ 13.191259] systemd[1]: Mounting Huge Pages File System...
[ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
[ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.231452] systemd[1]: Starting Apply Kernel Variables...
[ 13.240935] systemd[1]: Starting Setup Virtual Console...
[ 13.252572] systemd[1]: Started Load Kernel Modules.
[ 13.252592] systemd[1]: Mounted FUSE Control File System.
[ 13.252605] systemd[1]: Mounting Debug File System...
[ 13.254667] systemd[1]: Mounting Configuration File System...
[ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
[ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.305183] systemd[1]: Starting Journal Service...
[ 13.307733] systemd[1]: Started Journal Service.
[ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 13.750053] systemd-udevd[127]: starting version 197
[ 13.921301] systemd-journald[128]: Received SIGUSR1
[ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.951986] ACPI: Invalid Power Resource to register!
[ 14.953337] parport0: PC-style at 0x378
[ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.027758] ppdev: user-space parallel port driver
[ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
[ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
[ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
[ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
[ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.124825] ACPI: Requesting acpi_cpufreq
[ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 15.127327] ACPI: Power Button [PWRB]
[ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 15.127425] ACPI: Power Button [PWRF]
[ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.140068] hda_intel: Disabling MSI
[ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
[ 15.310990] Disabling lock debugging due to kernel taint
[ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
[ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
[ 15.335992] mei 0000:00:16.0: setting latency timer to 64
[ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
[ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 15.384478] iTCO_vendor_support: vendor-support=0
[ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
[ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
[ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
[ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
[ 34.993208] NVRM: corruption and stability problems, and is not supported.
[ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 98.242223] fuse init (API version 7.20)
Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user.

[SOLVED] usb install of arch can't find internal hard disks

I installed arch to a 4gb usb flash drive and it works great. Keeping it bare bones for now without a GUI to force myself to learn more about linux and how it works. However, I would like to mount and access the internal hard drives of the "host" computer that i'm booting the usb on, and I can't seem to find them.
ls /dev/disk/by-anything only shows the usb device that arch is installed to and udev and something else I can't remember right now. Same results when I enter df -h.
I know that this is possible somehow, because I also have a live usb of Ubuntu 10.10 on another usb stick that can access the internal disks. However, my ubuntu stick also has a gui, Hal, etc and is a persistent live-disk-to-usb rather than an actual usb stick installation. Does that affect things?
I apologize if this is already covered somewhere. I am a super n00b with arch and I did my best to search both google and the forums.
Thank you in advance, and I look forward to being a part of the arch community!
Last edited by williamkray (2010-11-07 22:53:18)

skunktrader wrote:Perhaps the bios disables the internal disk drive when you boot from USB. Look through the kernel log to see whether the drives are detected during boot.
i've looked through the kernel log, and realize that i've never looked at one before and don't really know what i'm looking for. if i haven't lost your interest yet, here's a pastebin of a recent boot... the PNY is the usb stick that arch is installed to. http://pastebin.com/D7nzkaaq
phaedrus wrote:If you do a "cat /proc/partitions" you can see what partitions the kernel is aware of at any time... if your drive is connected and not throwing a tantrum, it should appear in that list. If it's not showing up in the list, check the cables/connections, if it still doesn't show up... panic
i will do this next. i'm pretty sure that the cables are connected properly, seeing that i can boot the computers in question without the usb stick and have full access to available drives.
thank you everyone for all your responses so far!
EDIT: alright, i looked at /proc/partitions and this is what it says:
major minor #blocks name
8 0 3915776 sda
8 1 3915744 sda1
3 0 39070080 hda
3 1 4883728 hda1
3 2 1 hda2
3 5 473886 hda5
3 6 33350877 hda6
so it looks like my internal drive is recognized somehow. my new question would be, what exactly is the difference between /proc/partitions and /dev/disk/ ?? and how do i find out more identifying/location information about hda to mount it into an accessible location in my file system?
Last edited by williamkray (2010-11-07 22:13:29)

Can't do factory restore & only disks that keep ejecting are the osx install and apps disks

First of all let me say, this is my first Apple computer and I'm not experienced in forums. Please do not read rudeness into what is actually frustration at searching forever for a solution and trying not to wish I had been talked into an Apple. With that said....
I've had my iMac for about a year and a half. We had lost our internet and were using a hotspot for awhile so we could look for another provider and get online if we needed to. One day I signed on and, we didn't have an isp mind you, but the browser opened up to the dominant isp in this area saying a virus was detected coming from this iMac address? I thought that was strange and panicked so decided to do what I would on a pc, just restore the whole thing to factory settings. Everything was going smooth, (my updates were at 10.6.8 at the time)... when I restored I was back at 10.6.2. (osx disk) I was doing systems updates and one apparently hung.... when told to restart, I did... but the computer would never boot back up. It would turn on.... go to gray screen... then blue screen... then shut off. I couldn't boot in safe mode, pram reset did nothing, smc reset did nothing, couldn't hold 'd' to get to diagnostics, couldn't boot to recovery... it kept spitting out disks after trying to read them... with all those solutions I found online and nothing helping I had to call Apple... they couldn't help over the phone because Apple Care expired, unless I purchased help... this frustrated me because every where I found my problem and a different solution their Apple Care had expired too.... so had to set an appt at an Apple store.
So took it in to Apple, just got it back yesterday. I let them know I was restoring to factory settings so wasn't worried about losing anything. When I picked it up, I was told no charge... it was a software issue they saw where it hung and fixed it. I tried to ask questions about the 'software repair' but they didn't seem to want to answer my questions. It just says 'software repair' on my order. So I asked 'okay, so it's back to factory settings like when I bought it?' I was told yes and I said great that was my goal anyway. I get home and it's NOT like when I first purchased it or like a factory restore. Everything I was doing before it crashed is on there. So I'm back to trying to do a factory restore. But for some reason now, it seems the only disks that keep self ejecting are the osx install and application disks. I still can't do a boot recovery, AHT, or 'c' boot... since the apple disks eject I can't use start up to get to them.
I find it odd that both the oxc install disk and applications disk would be damaged at the same time when they both previously worked. I called the Apple Store where I took it to talk to the geniuses that worked on it because I had a question about the repair they did....
Apple: I'm sorry we don't offer tech support
Me: I understand but I had a question about the repair done from there the other day
Apple: We are just a store and can't answer tech questions
Me: I understand and get that but since I took my mac to your store to be worked on I thought I could ask the person that worked on it a question about the 'software repair' and meaning and what software was repaired
Apple: No you will have to set another apt to bring your computer in if you are still having problems
Me: UGHHHHHH (pulling hair out)
So (a little late huh?) to make a long story short giving what I stated above:
Why is it, only the osx install and application disks not working now? They worked before taking it to Apple
What can I do at this point?
Can you do a factory restore without disks on a Mac?
If by chance both disk did for some reason go out, how do I get them replaced?
If I gave TMI without enough important info let me know.
My OS X install disk says version 10.6.2 on it
About this Mac currently says Mac OS X version 10.6.8
Batteries died on keyboard and mouse so am using usb wired keyboard and mouse
At some point I had used bootcamp and then later found parallels so I could install a Corel product and keep using... could some windows files be messing something up in there somewhere?
It used to say Mac OS X Version 10.6.8 and I could have sworn I saw it said 'snow leopard' in there somewhere, now I can't even find that word in search on the computer. Long post I know but trying to set what was going on at the time I took it in.
I'm not sure what else needs to be added to get this to the correct thread or help. As I stated my goal is to have it like I just pulled it out of the box for the first time so no solution will scare me off about loss of data.
Thanks for any help.

Wow, sorry to hear of your experience. Seems strange that your disk would just eject like they did. It could be a lot of things but more than likely you just kind of have to start all over.
What I would do is insert your system disk and instead of going immediately to an install I would go to disk utility and erase the drive. That will erase everything on the disk and give you a new blank disk to start with. After that I would try to reinstall the system. Assuming that goes well then you should be restored to where it was when you purchased it. After that you can reinstall all your applications or personal files. I hope you have good backups.
I remember one time I was having a similar problem and don't ask my why I did it but I actually could not get it to install a system. I removed both of my ram sticks, shut the computer down for about 10 minutes including unplugging it from the wall plug, then reinstalled the ram, plugged it back in and started up from the system disk and all worked just fine. To this day I have no idea if pulling the ram helped but I have never had to do it since and for some dumb reason that solved the problem I was having, which is the same problem you are having now. Call it voodoo but it worked.
Good Luck!!
Message was edited by: Al Van Malsen

Arch don't detect and automount disks

Similar Messages

Maybe you are looking for