Arch fails to boot after installation (BIOS mode)

I finished my Arch installation, following the Beginner's Guide, and once I unmounted the partitions and rebooted, GRUB failed to boot into Arch. I'm not exactly sure what the problem is though. Basically what happens is I power on the machine, the Dell splash screen comes up, GRUB loads, I choose
Arch Linux, with Linux core repo kernel
the kernel and ramdisk attempt to load, then some message about "recovering journal" appears, and then I return back to the Dell splash screen. The same thing happens even if I choose the second option
Arch Linux, with Linux core repo kernel (Fallback initramfs)
However, when I choose to boot Win XP everything boots just fine. My apologies for the quality of the videos and pictures.
Here's a video of what happens:
http://youtu.be/uC96kX6iTjI
I suspect this has to do with this error I got when I generated the "grub.cfg". Although I'm not entirely sure because my understanding is that this error would affect booting Win XP which in fact boots perfectly fine. 
Error (and no I'm not using any lvm volumes)
http://imgur.com/qqxpoGG
I believe these are the portions of the "grub.cfg" that load Arch and Win XP. I got these by pressing "e" while on their menu entry in the GRUB bootloader.
Arch (I had to scroll down to see the rest, hence two pictures)
http://imgur.com/79dBw2C
http://imgur.com/qusEfL0
Win XP
http://imgur.com/oLnLlT0
Any idea how I can fix this? Any help is greatly appreciated and please be patient, I know, I'm a noob.
* I'm not sure if this is of any significance but I had a problem very similar to this when trying to get the Arch install to boot via usb (this computer doesn't have CD/DVD drive). I solved it by following this excerpt from the Beginner's Guide.
Troubleshooting boot problems
If you are using an Intel video chipset and the screen goes blank during the boot process, the problem is likely an issue with Kernel Mode Setting. A possible workaround may be achieved by rebooting and pressing
e
over the entry that you are trying to boot (i686 or x86_64). At the end of the string type
nomodeset
and press
Enter
Here's a video of what it looked like:
http://youtu.be/vXRcbU0zdto
The computer specs:
OS: Windows XP Professional 32 bit Version 2002 Service Pack 3
CPU: Intel Pentium 4 @ 3.00 GHz
RAM: 2 GB DDR2
HDD: 80 GB

Hi,
why did you not try adding nomodeset with the regular boot? During the net-install no video drivers will be installed;
you have to install them after reboot after installing xorg. The (video)problem you had with booting from usb is still
present.

Similar Messages

  • G41 Fails to boot after updating BIOS

    I hope that somebody has some suggestions, and thank you in advance.
    I am helping out a friend who has inherited a 2881-22U.  I have managed to successfully upgrade to an 120GB HD and copy the Recovery partition to the drive.  (Hey, you use what you can in education).  I have gone through the reinstall process successfully several times, and have worked for two weeks with several test WinXP loads so I know that the system works properly.
    In checking the support website, of course, I noticed that there was a BIOS update (1XET57WW) and so I did the 1xuj15us.exe non-diskette update.  It successfully completed and then rebooted automatically.  Windows then failed to load - it hangs during the load process.  With trying to boot in Safe Mode & with logging, it would appear that the system hangs after loading drivers\mup.sys (normal configuration) or drivers\agpcpq.sys (safe mode).
    If I press the Access IBM button, the recovery partition (IBM Rescue and Recovery) software runs OK, and when if I select "Restore factory contents", it properly completes the format & copy, reboots, does the first automated batch file sequence, reboots and then hangs (at the same place as described above, never getting to SysPrep).
    If I put the original 30GB drive back in, it also fails loading Windows XP at the same spot, now that the BIOS has changed.
    The system was previously upgraded to 1GB years ago. The system was purchased in January 2005.   The hardware diagnostics pass OK.
    Thoughts on what's wrong and possible remedies:
    Is there some BIOS setting that got changed that I am not understanding?
    Is the BIOS update somehow bad (even though the recovery partition software runs OK)?
    Was the recovery partition image upgraded as well when the BIOS was updated?  If so, what is the specific part number to get the revised image?
    Is there some way I can get a BIOS image rollback to an older version?
    Thanks for any responses.
    Solved!
    Go to Solution.

    Solved the problem:
    Got the 1xuj15ud.exe diskette BIOS update and got it transferred to a USB flash drive (kind of hard to use a diskette when the system does not have a floppy drive).
    Did the update.  Reset the BIOS settings again.  Voilà, Windows starts loading again.
    Why I needed to reflash again, I dunno... Didn't have any sort of error message after the first flash.  Certainly wasn't resetting the BIOS settings to default - already did that the first time around.

  • Solaris 10u6 fails to boot after installation on HP Proliant DL380 G4

    Hello,
    I have used Solaris 10u5 without issues on the HP DL380 G4. However, when I tried to install update 6 (new installation), it fails to reboot. I starts to boot, then aborts and reboots the system. I added the arguments -av to help get more information. Here's what I was able to capture:
    Enter default directory for modules [platform/i86pc/kernel /kernel /usr/kernel]:
    module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000, 0xfffffffffb8d5f0f] data at 0xfffffffffbc00000
    module misc/amd64/krtld: text at [0xfffffffffb8d5f10, 0xfffffffffb90a89f] data at 0xfffffffffbc74ce0
    module /kernel/amd64/genunix: text at [0xfffffffffb90a8a0, 0xfffffffffbb04f4f] data at 0xfffffffffbc7ee00
    Name of system file [etc/system]:
    SunOS Release 5.10 Version Generic_137138-09 64-bit
    Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    features: 14dffdf<cpuid,mwait,cx16,sse3,asysc,htt,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr,tsc,lgpg>
    mem = 6225476K (0x17bf91000)
    root nexus = i86pc
    pseudo0 at root
    pseudo0 is /pseudo
    scsi_vhci0 at root
    scsi_vhci0 is /scsi_vhci
    isa0 at root
    psuedo-device ppm0
    ppm0 is /pseudo/ppm@0
    npe0 at root: space 0 offset 0
    npe0 is /pci@0,0
    pcie_pci0 is /pci@0,0/pci8086,3595@2
    PCIE-device: pci8086,32a@0,2, pcie_pci3
    pcie_pcie3 is /pci@0,0/pci8086,3595@2/pci8086,32a@0,2
    NOTICE:
    * This device is not bootable! *
    * It is either offlined or detached or faulted. *
    * Please try to boot from a different device. *
    NOTICE:
    spa_import_rootpool: error 22
    panic[cpu0]/thread=fffffffffbc26ba0: cannot mount root path /pci@0,0/pci8086,3595@2/pci8086,32a@0/pcie11,4091@3/sd@0,0:a /pci@0,0/pci8086
    ,3595@2/pci8086,32a@0,2/pcie11,4091@3/sd@1,0:a
    fffffffffbc49320 genunix:rootconf+114 ()
    fffffffffbc49350 genunix:vfs_mountroot+61 ()
    I have tried this on two identical machines with the same results. Some other details:
    - Booting into failsafe mode works; the system finds and mounts the zfs volumes
    - I did a network installation. I rebuilt the miniroot to include the CPQary3 package
    - I tried installing with a zpool with two disks as well as only one disk; the result was the same
    - I also tried installing without using a ZFS root disk; it also fails
    I have googled for this problem but have not found anything like it. I would greatly appreciate any help!
    Thanks,
    Michael

    I finally figured it out. For some reason, the installer does not install the driver package (CPQary3) or include it in the boot archive. The driver is in the fail-safe miniroot, however. So, I booted into fail-safe mode and installed the driver, and now everything works!
    I ran into two problems with the installer on this hardware. I'll post details and work-arounds for both in a separate message.

  • [SOLVED] Arch won't boot after I created a separate /var parition

    Arch won't boot after I created a separate /var parition on an existing installation.And let me confess: it was maybe stupid trying to do it on an existing install.
    I edited the fstab correctly, copied the files using rsync preserving permissions. Then I kept a backup of /var using tar. Then went on to delete everything under /var, ie /var/*, the /var folder is still there. All this I did from a live CD. After that I booted into my arch linux. Here I get messages about systemd successfully finishing fsck on each of my partitions, then the screen starts blinking. And there is no more output. Pressing Ctrl+Alt+Delete causes systemd to stop its services and reboot.
    Having realized I had borked my system, I removed the /var line from fstab and restored /var from the tar file I made earlier. Again I did this from a live cd. Rebooted into my arch system, and again similar issues, namely that after fsck and messages informing a few services had started, the screen keeps blinking.
    The live cd I used for reorganizing my partitions was elementary OS freya. They have GParted in there. I also have an arch install iso lying aroung from May 2013. If necessary, I can download the latest version. I am currently typing from a Windows installation I dual boot from.
    I don't know how to extract any boot logs as I am locked out of the system. Here is my fstab in any case:
    # Filesystem information
    # /dev/sda5 LABEL=fs_root
    UUID=b9d739cf-fd8c-46dd-a919-bd827dc47c66 / ext4 rw,noatime,data=ordered 0 1
    # /dev/sda9 LABEL=fs_var
    UUID=ec0f7a49-dccd-43ab-8651-9aa3fdb41cc7 /var ext4 rw,noatime,data=ordered 0 2
    # /dev/sda2 LABEL=fs_boot
    UUID=0e8ab31a-3bda-4b85-a901-a36f21b1583d /boot ext2 rw,noatime 0 2
    # /dev/sda6 LABEL=fs_home
    UUID=d9e63c47-274e-447f-ad01-0d97afe0fd34 /home ext4 rw,noatime,data=ordered 0 2
    # /dev/sda7 LABEL=fs_swap
    UUID=7301227c-e9f3-41b8-9d0f-4cf3c159491c none swap defaults 0 0
    # /dev/sda3 LABEL=fs_win
    UUID=12B639D1B639B5D7 /fs_win ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,nofail,noauto,x-systemd.automount 0 0
    # /dev/sda3 LABEL=fs_share
    UUID=D272269772268079 /fs_share ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,noauto,nofail,x-systemd.automount 0 0
    I would greatly appreciate any help.
    Last edited by richcocoa (2015-05-03 18:04:44)

    Have you moved everything from /var to /new_var (i named it for learning purpose)? You shoud copy content from /var but not on the fly but booting from arch iso cd, and than you shoud mount your / into arch-chroot environement, mount all of your mount points and than copy content from default /var to new /var. The copying should be done with this
    cp -rax
    and you can add -v switch to verbose output. I have my own /var moved the same way.
    The simples way is:
    -boot the arch iso cd
    -mount all of your mount point (i created here in this step /new_var to move /var to a new place, and this /new_var i put in /etc/fstab as /var later)
    -copy /var to /new_var with -rax or -vrax (recursive, archive, this filesystem or verbose, recursive, archive, this filesystem switches)
    -umount all of it
    -reboot.
    Last edited by firekage (2015-05-02 07:49:20)

  • [SOLVED] Lenovo T530 UEFI Arch/Ubuntu Dual boot - Arch fails to boot.

    Hi All,
    I have installed Arch to my Lenovo T530 to dual boot with Ubuntu using UEFI and Grub.
    After installation, Arch is presented to me as an option when my laptop fires up. However, if I select it, the loader goes to a purple screen and then hangs.
    I have attached here the bootloader scripts for my Arch installation (not working), my Ubuntu installation (working) and the output from sudo lsblk -o name,mountpoint,label,size,uuid.
    Please let me know if there is more useful information I can provide. (I have output from Bootinfoscript available but it is quite extensive).
    I am hoping to find out if there is an easily fixable error in the booting scripts used by Grub. If not, I have seen the section on dual booting with Arch in the wiki. My worry is that if I resort to it, UEFI looks to be temperamental at best and I risk breaking my currently working Ubuntu installation.
    Thanks and regards,
    Simon
    Arch boot script (not working):
    setparams 'Arch (on /dev/sda4)'
    insmod part-gpt
    insmod ext2
    set root= 'hd0,gpt4'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 -\
    -hint-efi=hd0,gpt4 -hint-baremetal=ahci0,gpt4 729b5164-22c4-4c21-8212-\
    66038d60943e
    else
    search --no-floppy --fs-uuid --set=root 729b5164-22c4-4c21-821\
    2-66038d60943e
    fi
    linux /boot/vmlinuz root=UUID=ad4103fa-d940-47ca-8506-301d\
    8071d467 rw quiet
    initrd /boot/initramfs-linux.img
    Ubuntu boot script (working)
    setparams 'Ubuntu, with Linux 3.13.0-24-generic'
    recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part-gpt
    insmod ext2
    set root= 'hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd\
    0,gpt2 --hint-efi=hd0,gpt2 -hint-baremetal=ahci0,gpt2 542bf27c-0fd5-42\
    4a-b4d8-107f7cf97b75
    else
    search --no-floppy --fs-uuid --set=root 542bf27c-0fd5-\
    424a-b4d8-107f7cf97b75
    fi
    echo 'Loading Linux 3.13.0-24-generic ...'
    linux /boot/vmlinuz-3.13.0-24-generic root=UUID=5\
    42bf27c-0fd5-424a-b4d8-107f7cf97b75 ro quiet spash $vt_handoff
    echo 'Loading initial ramdisk ...'
    initrd /boot/initrd.img-3.13.0-24-generic
    Output from sudo lsblk -o name,mountpoint,label,size,uuid
    NAME MOUNTPOINT LABEL SIZE UUID
    sda 119.2G
    ├─sda1 /boot/efi BOOTLOADER 524M 9360-2939
    ├─sda2 / Linux_Ubuntu 34.6G 542bf27c-0fd5-424a-b4d8-107f7cf97b75
    ├─sda3 [SWAP] Swap 9.8G 7768ae01-6e37-450b-bf0c-d873e3fd06a1
    ├─sda4 Linux_Arch 32.7G 729b5164-22c4-4c21-8212-66038d60943e
    ├─sda5 /media/Data Data 33.2G 5a971a77-685b-43d5-a8e6-c7b407a4c2ff
    └─sda6 Misc_Data 8.5G b165990d-bd25-458f-b2d6-63fae28d0870
    sdb 1T
    └─sdb1 1024G a1ee2f60-007a-4292-982b-7d5f8375fc7e
    sr0 1024M
    Last edited by simon_sjw (2015-03-22 10:43:03)

    linux /boot/vmlinuz root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
    Change the UUID here. Where did that come from?
    EDIT: curiously, if you DuckDuckGo search this exact UUID, it comes up a bunch of times and has caused people headaches before. If you fix that you should be okay. If anyone knows why this same exact UUID would incorrectly be created on multiple systems, I'd love to know. Seems like some kind of issue with dual/triple booting and OS-prober.
    2nd EDIT: this UUID is in the default in grub.cfg. For some reason, it sometimes won't be replaced by grub-mkconfig... Maybe the user didn't run grub-mkconfig, but edited the file him or herself? simon_sjw?
    Last edited by nullified (2015-03-22 03:12:36)

  • [SOLVED] System fails to boot after upgrade.

    Not exactly sure what happened as the upgrade appeared to go smoothly. Now trying to start just causes an endless cycle of rebooting. I have been unable to even boot into single user mode. Any suggestions are greatly appreciated here.
    Using the livecd I can mount all the filesystems, and I have run fsck on all of them so I know they are clean. Here are my grub entries:
    # (0) Arch Linux
    title Arch Linux
    root (hd0,1)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/569a7fe5-7452-4064-adc1-71b6b2b58b0b resume=/dev/sda7 ro vga=773 elevator=deadline
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,1)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/569a7fe5-7452-4064-adc1-71b6b2b58b0b ro vga=773
    initrd /boot/kernel26-fallback.img
    I have tried using a kernel line of just:
    kernel /boot/vmlinuz26 root=/dev/sda2 ro
    and get the same results, as soon as grub starts to load the kernel the system reboots and I can't see what's on screen long enough to know what's happening.
    pacman.log:
    [2009-07-19 16:02] synchronizing package lists
    [2009-07-19 16:02] starting full system upgrade
    [2009-07-20 14:52] synchronizing package lists
    [2009-07-20 14:52] starting full system upgrade
    [2009-07-20 14:54] starting full system upgrade
    [2009-07-20 15:44] upgraded kernel-headers (2.6.29.3-1 -> 2.6.30.1-1)
    [2009-07-20 15:44] Generating locales...
    [2009-07-20 15:44] en_US.UTF-8... done
    [2009-07-20 15:44] en_US.ISO-8859-1... done
    [2009-07-20 15:44] Generation complete.
    [2009-07-20 15:44] upgraded glibc (2.10.1-2 -> 2.10.1-3)
    [2009-07-20 15:44] upgraded readline (5.2.013-2 -> 6.0.003-1)
    [2009-07-20 15:44] upgraded abook (0.6.0pre2-1 -> 0.6.0pre2-2)
    [2009-07-20 15:44] upgraded gcc-libs (4.4.0-3 -> 4.4.0-5)
    [2009-07-20 15:44] upgraded libgcrypt (1.4.4-1 -> 1.4.4-2)
    [2009-07-20 15:44] upgraded gnutls (2.8.0-1 -> 2.8.1-1)
    [2009-07-20 15:44] upgraded bash (3.2.048-3 -> 4.0.024-1)
    [2009-07-20 15:44] upgraded e2fsprogs (1.41.6-1 -> 1.41.8-1)
    [2009-07-20 15:44] upgraded perl (5.10.0-4 -> 5.10.0-6)
    [2009-07-20 15:44] warning: /etc/ssl/openssl.cnf installed as /etc/ssl/openssl.cnf.pacnew
    [2009-07-20 15:44] upgraded openssl (0.9.8k-2 -> 0.9.8k-4)
    [2009-07-20 15:44] upgraded sqlite3 (3.6.15-1 -> 3.6.15-2)
    [2009-07-20 15:44] upgraded heimdal (1.2.1-3 -> 1.2.1-5)
    [2009-07-20 15:44] upgraded libpng (1.2.37-1 -> 1.2.38-1)
    [2009-07-20 15:44] upgraded libjpeg (6b-6 -> 7-1)
    [2009-07-20 15:44] upgraded libtiff (3.8.2-4 -> 3.8.2-5)
    [2009-07-20 15:44] upgraded libcups (1.3.10-2 -> 1.3.11-1)
    [2009-07-20 15:44] upgraded cairo (1.8.6-1 -> 1.8.8-1)
    [2009-07-20 15:44] upgraded libthai (0.1.11-1 -> 0.1.12-1)
    [2009-07-20 15:44] upgraded pango (1.24.2-1 -> 1.24.4-2)
    [2009-07-20 15:44] upgraded gtk2 (2.16.2-1 -> 2.16.5-1)
    [2009-07-20 15:44] upgraded aiksaurus (1.2.1-1 -> 1.2.1-2)
    [2009-07-20 15:45] upgraded python (2.6.2-2 -> 2.6.2-5)
    [2009-07-20 15:45] upgraded boost (1.37.0-1 -> 1.39.0-1)
    [2009-07-20 15:45] upgraded libmysqlclient (5.1.35-2 -> 5.1.36-1)
    [2009-07-20 15:45] upgraded mysql-clients (5.1.35-1 -> 5.1.36-1)
    [2009-07-20 15:45] upgraded mysql (5.1.35-1 -> 5.1.36-1)
    [2009-07-20 15:45] upgraded libmng (1.0.10-1 -> 1.0.10-2)
    [2009-07-20 15:45] upgraded dri2proto (2.0-1 -> 2.1-1)
    [2009-07-20 15:45] upgraded libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-20 15:45] upgraded libxt (1.0.5-2 -> 1.0.6-1)
    [2009-07-20 15:45] upgraded mesa (7.4.4-1 -> 7.5-1)
    [2009-07-20 15:45]
    [2009-07-20 15:45] > Qt 4.5.1
    [2009-07-20 15:45]
    [2009-07-20 15:45] Prefix: /usr
    [2009-07-20 15:45]
    [2009-07-20 15:45] > ATTENTION
    [2009-07-20 15:45] Some components are split into separate packages:
    [2009-07-20 15:45]
    [2009-07-20 15:45] qtmod : Base libraries and tools
    [2009-07-20 15:45] qtmod-doc : Documentation
    [2009-07-20 15:45] qtmod-demos : Demos & Examples
    [2009-07-20 15:45] qtmod-tools : Development Tools (Assistant, Designer, Linguist)
    [2009-07-20 15:45]
    [2009-07-20 15:45] upgraded qtmod (4.5.1-2 -> 4.5.1-4)
    [2009-07-20 15:45] upgraded akonadi (1.1.2-1 -> 1.1.2-2)
    [2009-07-20 15:45] upgraded apr (1.3.3-1 -> 1.3.5-1)
    [2009-07-20 15:45] upgraded unixodbc (2.2.14-1 -> 2.2.14-2)
    [2009-07-20 15:45] upgraded apr-util (1.3.4-1 -> 1.3.7-1)
    [2009-07-20 15:45] upgraded apvlv (0.0.6.5-1 -> 0.0.6.7-1)
    [2009-07-20 15:45] upgraded libsndfile (1.0.20-2 -> 1.0.20-3)
    [2009-07-20 15:45] upgraded jack-audio-connection-kit (0.116.2-1 -> 0.116.2-2)
    [2009-07-20 15:45] upgraded wxgtk (2.8.10.1-1 -> 2.8.10.1-4)
    [2009-07-20 15:45] upgraded audacity (1.3.7-1 -> 1.3.8-1)
    [2009-07-20 15:45] upgraded avifile (0.7.45-3 -> 0.7.45-4)
    [2009-07-20 15:45] upgraded imlib2 (1.4.2-2 -> 1.4.2-3)
    [2009-07-20 15:45] upgraded libxdg-basedir (1.0.0-2 -> 1.0.1-1)
    [2009-07-20 15:45] upgraded lua (5.1.4-3 -> 5.1.4-4)
    [2009-07-20 15:45]
    [2009-07-20 15:45] ==> awesome installation notes:
    [2009-07-20 15:45] ----------------------------------------
    [2009-07-20 15:45] During some updates of awesome, the config file syntax changes heavily.
    [2009-07-20 15:45] This means that your configuration file (~/.config/awesome/rc.lua) for
    [2009-07-20 15:45] any other than this particular version of awesome may or may not work.
    [2009-07-20 15:45]
    [2009-07-20 15:45] upgraded awesome (3.3-2 -> 3.3.1-1)
    [2009-07-20 15:45] upgraded bc (1.06-5 -> 1.06-6)
    [2009-07-20 15:45] upgraded binutils (2.19.1-4 -> 2.19.1-5)
    [2009-07-20 15:45] upgraded gstreamer0.10-base-plugins (0.10.23-1 -> 0.10.23-2)
    [2009-07-20 15:45] upgraded brasero (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:45] upgraded run-parts (2.31-1 -> 3.1.3-1)
    [2009-07-20 15:45] upgraded sed (4.2-1 -> 4.2.1-1)
    [2009-07-20 15:45] Updating certificates in /etc/ssl/certs... 4 added, 0 removed; done.
    [2009-07-20 15:45] Running hooks in /etc/ca-certificates/update.d....done.
    [2009-07-20 15:45] upgraded ca-certificates (20080809-5 -> 20090709-1)
    [2009-07-20 15:45] upgraded cairomm (1.8.0-1 -> 1.8.2-1)
    [2009-07-20 15:45] upgraded calcurse (2.5-1 -> 2.6-1)
    [2009-07-20 15:45] upgraded mjpegtools (1.9.0-1 -> 1.9.0-2)
    [2009-07-20 15:45] upgraded cinelerra-cv (20090519-1 -> 20090715-1)
    [2009-07-20 15:45] upgraded ctags (5.7-1 -> 5.8-1)
    [2009-07-20 15:45] upgraded lcms (1.18-1 -> 1.18-2)
    [2009-07-20 15:45]
    [2009-07-20 15:45] NOTE for drcaw:
    [2009-07-20 15:45] ----
    [2009-07-20 15:45] ==> dcraw provides the simple commandline tools for raw conversion. If you
    [2009-07-20 15:45] ==> are looking for a more sophisticated way consider gimp-ufraw, which
    [2009-07-20 15:45] ==> provides a gimp-plugin and a standalone application that can even convert
    [2009-07-20 15:45] ==> to 16-bit tiff files (which you can use in cinepaint eg.) So please do a
    [2009-07-20 15:45] ==> 'pacman -S gimp-ufraw' to get it.
    [2009-07-20 15:45]
    [2009-07-20 15:45] upgraded dcraw (1.410-1 -> 1.425-1)
    [2009-07-20 15:45] upgraded libtorrent-rasterbar (0.14.2-1 -> 0.14.4-2)
    [2009-07-20 15:45]
    [2009-07-20 15:45] >>> Deluge's daemon is running with the "deluge" user. The default download directory is /srv/deluge/
    [2009-07-20 15:45]
    [2009-07-20 15:45] upgraded deluge (1.1.9-1 -> 1.1.9-2)
    [2009-07-20 15:45] upgraded device-mapper (1.02.32-1 -> 1.02.33-1)
    [2009-07-20 15:45] upgraded jasper (1.900.1-2 -> 1.900.1-3)
    [2009-07-20 15:45] upgraded devil (1.7.8-1 -> 1.7.8-2)
    [2009-07-20 15:45] upgraded dhcpcd (5.0.4-1 -> 5.0.6-1)
    [2009-07-20 15:45] > Rebuilding MIME database ... DONE
    [2009-07-20 15:45] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:45] upgraded kdemod-kdelibs (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:45] upgraded libtool (2.2.6a-1 -> 2.2.6a-2)
    [2009-07-20 15:46] NOTE
    [2009-07-20 15:46] ----
    [2009-07-20 15:46] Add your user to group 'camera' to use camera devices.
    [2009-07-20 15:46] upgraded libgphoto2 (2.4.6-1 -> 2.4.6-2)
    [2009-07-20 15:46] NOTE
    [2009-07-20 15:46] ----
    [2009-07-20 15:46] Add your user to group 'scanner' to use scanner devices.
    [2009-07-20 15:46] upgraded sane (1.0.20-2 -> 1.0.20-3)
    [2009-07-20 15:46] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:46] upgraded kdemod-kdegraphics-common (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:46] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:46] upgraded kdemod-kdepimlibs (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:46] upgraded digikam (0.10.0-2 -> 0.10.0-3)
    [2009-07-20 15:46] upgraded directfb (1.2.8-1 -> 1.4.1-1)
    [2009-07-20 15:46] upgraded ghostscript (8.64-5 -> 8.64-6)
    [2009-07-20 15:46] upgraded libwmf (0.2.8.4-4 -> 0.2.8.4-5)
    [2009-07-20 15:46] upgraded libxml2 (2.7.3-1.1 -> 2.7.3-2)
    [2009-07-20 15:46] upgraded imagemagick (6.5.3.2-1 -> 6.5.3.10-1)
    [2009-07-20 15:46] upgraded dvdauthor (0.6.14-4 -> 0.6.14-5)
    [2009-07-20 15:46] -- Edit config.h in PKGBUILD's directory (generally /var/abs/community/x11/dwm/)
    [2009-07-20 15:46] -- and rebuild package if you want to change settings.
    [2009-07-20 15:46] upgraded dwm (5.5-1 -> 5.6-1)
    [2009-07-20 15:46] upgraded smbclient (3.3.6-1 -> 3.3.6-2)
    [2009-07-20 15:46] upgraded mplayer (29318-1.1 -> 29411-3)
    [2009-07-20 15:46] installed flam3 (2.7.18-3)
    [2009-07-20 15:46] upgraded electricsheep (2.6.8-4 -> 2.7b12-1)
    [2009-07-20 15:46] upgraded enblend-enfuse (3.2-2 -> 3.2-3)
    [2009-07-20 15:46] upgraded gnome-keyring (2.26.1-1 -> 2.26.3-1)
    [2009-07-20 15:46] upgraded libsoup (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:46] upgraded libgweather (2.26.1-2 -> 2.26.2.1-1)
    [2009-07-20 15:46] upgraded evolution-data-server (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:46] upgraded gtkhtml (3.26.2-1 -> 3.26.3-1)
    [2009-07-20 15:46] upgraded evolution (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:46] upgraded evolution-exchange (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:46] upgraded feh (1.3.4-4 -> 1.3.4-5)
    [2009-07-20 15:46] upgraded ffmpegthumbnailer (1.5.0-1 -> 1.5.4-2)
    [2009-07-20 15:46] upgraded filezilla (3.2.4.1-1 -> 3.2.6.1-1)
    [2009-07-20 15:46] upgraded fltk (1.1.9-1 -> 1.1.9-2)
    [2009-07-20 15:46] upgraded fluidsynth (1.0.8-1 -> 1.0.9-1)
    [2009-07-20 15:46] upgraded fox (1.6.35-1 -> 1.6.36-1)
    [2009-07-20 15:47] upgraded freeciv (2.1.9-1 -> 2.1.9-2)
    [2009-07-20 15:47] upgraded gcc (4.4.0-3 -> 4.4.0-5)
    [2009-07-20 15:47] upgraded gd (2.0.35-1 -> 2.0.35-2)
    [2009-07-20 15:47] upgraded gedit (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:47] upgraded gegl (0.0.22-1 -> 0.0.22-2)
    [2009-07-20 15:47] upgraded gimp (2.6.6-1 -> 2.6.6-2)
    [2009-07-20 15:47] upgraded gimp-ufraw (0.15-2 -> 0.15-4)
    [2009-07-20 15:47] upgraded glade (3.6.5-2 -> 3.6.7-1)
    [2009-07-20 15:47] upgraded glib-perl (1.221-1 -> 1.222-1)
    [2009-07-20 15:47] upgraded glibmm (2.20.0-1 -> 2.20.1-1)
    [2009-07-20 15:47] upgraded gmerlin (0.4.0-4 -> 0.4.0-5)
    [2009-07-20 15:47] upgraded gnome-desktop (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:47] upgraded gnome-menus (2.26.1-1 -> 2.26.2-1)
    [2009-07-20 15:47] upgraded libwnck (2.26.1-1 -> 2.26.2-1)
    [2009-07-20 15:47] upgraded gnome-panel (2.26.2-1 -> 2.26.3-1)
    [2009-07-20 15:48] upgraded gnome-themes (2.26.2-1 -> 2.26.3.1-1)
    [2009-07-20 15:48] upgraded gnupg (1.4.9-1 -> 1.4.9-4)
    [2009-07-20 15:48] upgraded gnupg2 (2.0.11-1 -> 2.0.12-1)
    [2009-07-20 15:48] upgraded libxaw (1.0.5-1 -> 1.0.6-1)
    [2009-07-20 15:48] upgraded graphviz (2.22.2-1.1 -> 2.22.2-2)
    [2009-07-20 15:48] upgraded grep (2.5.4-2 -> 2.5.4-3)
    [2009-07-20 15:48] upgraded gstreamer0.10-good-plugins (0.10.15-1 -> 0.10.15-2)
    [2009-07-20 15:48] upgraded gtk-recordmydesktop (0.3.8-1 -> 0.3.8-2)
    [2009-07-20 15:48] upgraded gtk2-perl (1.220-1 -> 1.221-1)
    [2009-07-20 15:48] upgraded guile (1.8.6-1 -> 1.8.7-1)
    [2009-07-20 15:48] >>please run /usr/sbin/cups-genppdupdate
    [2009-07-20 15:48] >>and restart cups deamon
    [2009-07-20 15:48] upgraded gutenprint (5.2.3-1 -> 5.2.3-3)
    [2009-07-20 15:48]
    [2009-07-20 15:48] NOTE
    [2009-07-20 15:48] ----
    [2009-07-20 15:48] # If you want to use this driver with sane:
    [2009-07-20 15:48] # echo "hpaio" >> /etc/sane.d/dll.conf
    [2009-07-20 15:48]
    [2009-07-20 15:48]
    [2009-07-20 15:48] UPGRADING
    [2009-07-20 15:48] ----
    [2009-07-20 15:48] # This version no longer uses an init script. You should remove hplip
    [2009-07-20 15:48] # from the /etc/rc.conf daemon list.
    [2009-07-20 15:48]
    [2009-07-20 15:48] upgraded hplip (3.9.4b-1 -> 3.9.4b-2)
    [2009-07-20 15:48] upgraded htmldoc (1.8.27-1 -> 1.8.27-2)
    [2009-07-20 15:48] upgraded libpano13 (2.9.12-1 -> 2.9.12-2)
    [2009-07-20 15:48] upgraded hugin (0.7.0-4 -> 0.7.0-5)
    [2009-07-20 15:48] upgraded hwdetect (2009.06-1 -> 2009.07-1)
    [2009-07-20 15:48] upgraded icu (4.2-1 -> 4.2.1-1)
    [2009-07-20 15:48] upgraded imlib (1.9.15-5 -> 1.9.15-6)
    [2009-07-20 15:48] upgraded inkscape (0.46-11 -> 0.46-12)
    [2009-07-20 15:48] upgraded iptables (1.4.3.2-1 -> 1.4.4-1)
    [2009-07-20 15:48] upgraded iw (0.9.14-1 -> 0.9.15-1)
    [2009-07-20 15:48] upgraded iwlwifi-4965-ucode (228.57.2.23-1 -> 228.61.2.24-1)
    [2009-07-20 15:48] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:48] upgraded kdemod-kdebase-runtime (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:48] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:48] upgraded kdemod-kdebase (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded kdemod-kdebase-doc (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdebase-konsole (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdebase-kwrite (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded kdemod-kdebase-runtime-doc (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdebase-runtime-icons (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdebase-workspace (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded kdemod-kdebase-workspace-doc (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded kdemod-kdebase-workspace-wallpapers (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-doc (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-gwenview (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-kamera (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-kcolorchooser (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-kolourpaint (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-kruler (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-ksnapshot (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] upgraded libdjvu (3.5.22-1 -> 3.5.22-2)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdegraphics-okular (4.2.4-1 -> 4.2.4-3)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-common (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-doc (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-kget (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-kopete (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] upgraded ppp (2.4.4-8 -> 2.4.4-9)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-kppp (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] upgraded libvncserver (0.9.7-1 -> 0.9.7-2)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-krdc (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
    [2009-07-20 15:49] upgraded kdemod-kdenetwork-krfb (4.2.4-1 -> 4.2.4-2)
    [2009-07-20 15:50] >>> Updating module dependencies. Please wait ...
    [2009-07-20 15:50] >>> MKINITCPIO SETUP
    [2009-07-20 15:50] >>> ----------------
    [2009-07-20 15:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-07-20 15:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-07-20 15:50] >>> More information about mkinitcpio setup can be found here:
    [2009-07-20 15:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-07-20 15:50]
    [2009-07-20 15:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-07-20 15:50] ==> Building image "default"
    [2009-07-20 15:50] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-07-20 15:50] :: Begin build
    [2009-07-20 15:50] :: Parsing hook [base]
    [2009-07-20 15:50] :: Parsing hook [udev]
    [2009-07-20 15:50] :: Parsing hook [autodetect]
    [2009-07-20 15:51] :: Parsing hook [pata]
    [2009-07-20 15:51] :: Parsing hook [scsi]
    [2009-07-20 15:51] :: Parsing hook [sata]
    [2009-07-20 15:51] :: Parsing hook [filesystems]
    [2009-07-20 15:51] :: Generating module dependencies
    [2009-07-20 15:51] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-07-20 15:51] ==> SUCCESS
    [2009-07-20 15:51] ==> Building image "fallback"
    [2009-07-20 15:51] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-07-20 15:51] :: Begin build
    [2009-07-20 15:51] :: Parsing hook [base]
    [2009-07-20 15:51] :: Parsing hook [udev]
    [2009-07-20 15:51] :: Parsing hook [pata]
    [2009-07-20 15:51] :: Parsing hook [scsi]
    [2009-07-20 15:51] :: Parsing hook [sata]
    [2009-07-20 15:51] :: Parsing hook [filesystems]
    [2009-07-20 15:51] :: Generating module dependencies
    [2009-07-20 15:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-07-20 15:51] ==> SUCCESS
    [2009-07-20 15:51] upgraded kernel26 (2.6.30-5 -> 2.6.30.1-1)
    [2009-07-20 15:51] upgraded kismet (2008_05_R1-4 -> 2008_05_R1-5)
    [2009-07-20 15:51] upgraded lib32-cairo (1.8.6-1 -> 1.8.8-1)
    [2009-07-20 15:51] upgraded lib32-glibc (2.10.1-2 -> 2.10.1-3)
    [2009-07-20 15:51] upgraded lib32-e2fsprogs (1.41.6-1 -> 1.41.8-1)
    [2009-07-20 15:51] upgraded lib32-gcc-libs (4.4.0-3 -> 4.4.0-5)
    [2009-07-20 15:51] upgraded lib32-glib2 (2.20.3-1 -> 2.20.4-1)
    [2009-07-20 15:51] upgraded lib32-readline (5.2.013-2 -> 6.0.003-1)
    [2009-07-20 15:51] upgraded lib32-gnutls (2.8.0-1 -> 2.8.1-1)
    [2009-07-20 15:51] upgraded lib32-openssl (0.9.8k-2 -> 0.9.8k-4)
    [2009-07-20 15:51] upgraded lib32-heimdal (1.2.1-3 -> 1.2.1-5)
    [2009-07-20 15:51] upgraded lib32-libjpeg (6b-6 -> 7-1)
    [2009-07-20 15:51] upgraded lib32-libtiff (3.8.2-4 -> 3.8.2-5)
    [2009-07-20 15:51] upgraded lib32-libcups (1.3.10-2 -> 1.3.11-1)
    [2009-07-20 15:51] upgraded lib32-pango (1.24.2-1 -> 1.24.4-2)
    [2009-07-20 15:51] upgraded lib32-gtk2 (2.16.2-1 -> 2.16.5-1)
    [2009-07-20 15:51] upgraded lib32-libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-20 15:51] upgraded lib32-libgcrypt (1.4.4-1 -> 1.4.4-2)
    [2009-07-20 15:51] upgraded lib32-libgl (7.4.2-2 -> 7.4.4-1)
    [2009-07-20 15:51] upgraded lib32-libxml2 (2.7.3-1 -> 2.7.3-2)
    [2009-07-20 15:51] upgraded lib32-libxt (1.0.5-2 -> 1.0.6-1)
    [2009-07-20 15:51] upgraded lib32-mesa (7.4.2-1 -> 7.4.4-1)
    [2009-07-20 15:51] upgraded lib32-sqlite3 (3.6.15-1 -> 3.6.15-2)
    [2009-07-20 15:51] upgraded libcanberra (0.12-1 -> 0.14-1)
    [2009-07-20 15:51] upgraded libevent (1.4.10-1 -> 1.4.11-1)
    [2009-07-20 15:51] upgraded libgdiplus (2.4-1 -> 2.4.2-1)
    [2009-07-20 15:51] upgraded libquicktime (1.1.1-3 -> 1.1.1-4)
    [2009-07-20 15:52] upgraded libwebkit (1.1.10-1 -> 1.1.10-2)
    [2009-07-20 15:52] upgraded links-g (2.2-1 -> 2.2-2)
    [2009-07-20 15:52] upgraded lvm2 (2.02.47-1 -> 2.02.48-1)
    [2009-07-20 15:52] upgraded mercurial (1.2.1-1 -> 1.3-3)
    [2009-07-20 15:52] upgraded mtools (4.0.10-2 -> 4.0.10-3)
    [2009-07-20 15:52] upgraded mutagen (1.15-1 -> 1.16-1)
    [2009-07-20 15:52] upgraded namcap (2.2-2 -> 2.3-1)
    [2009-07-20 15:52] upgraded nautilus-cd-burner (2.24.0-1 -> 2.24.0-2)
    [2009-07-20 15:52] upgraded ncmpcpp (0.3.4-1 -> 0.3.5-1)
    [2009-07-20 15:52] upgraded wpa_supplicant (0.6.9-1 -> 0.6.9-2)
    [2009-07-20 15:52] upgraded netcfg (2.1.3-3 -> 2.2.1-1)
    [2009-07-20 15:52] upgraded neverball (1.5.1-1 -> 1.5.1-2)
    [2009-07-20 15:52] upgraded nmap (4.76-4 -> 5.00-1)
    [2009-07-20 15:52] upgraded openmovieeditor (0.0.20090105-3 -> 0.0.20090105-4)
    [2009-07-20 15:52] * relogin or source /etc/profile.d/openoffice.sh
    [2009-07-20 15:52] * see http://wiki.archlinux.org/index.php/Openoffice
    [2009-07-20 15:52] how to use extensions, e.g. for spell checking
    [2009-07-20 15:52] see /opt/openoffice/share/extension/install what
    [2009-07-20 15:52] is shipped with this package
    [2009-07-20 15:52] upgraded openoffice-base (3.1.0-2 -> 3.1.0-5)
    [2009-07-20 15:52] upgraded parted (1.8.8-2 -> 1.8.8-3)
    [2009-07-20 15:52] upgraded pcmanfm (0.5.1-1 -> 0.5.1-2)
    [2009-07-20 15:52] upgraded perl-html-parser (3.60-1 -> 3.61-1)
    [2009-07-20 15:52] upgraded perl-uri (1.37-1 -> 1.38-1)
    [2009-07-20 15:52] upgraded perl-libwww (5.825-1 -> 5.829-1)
    [2009-07-20 15:52] upgraded postgresql-libs (8.3.7-1 -> 8.3.7-2)
    [2009-07-20 15:52] upgraded pgadmin3 (1.10.0beta3-1 -> 1.10.0-1)
    [2009-07-20 15:52] upgraded pil (1.1.6-5 -> 1.1.6-6)
    [2009-07-20 15:52] upgraded pilot-link (0.12.3-4 -> 0.12.3-5)
    [2009-07-20 15:52] upgraded poppler (0.10.7-1 -> 0.10.7-2)
    [2009-07-20 15:52] upgraded postgresql (8.3.7-2 -> 8.3.7-3)
    [2009-07-20 15:52] upgraded pycairo (1.8.4-1 -> 1.8.6-1)
    [2009-07-20 15:52] upgraded qingy (0.9.9-1 -> 0.9.9-2)
    [2009-07-20 15:52] upgraded qt3 (3.3.8-11 -> 3.3.8-12)
    [2009-07-20 15:52] upgraded ruby (1.8.7_p173-1 -> 1.8.7_p174-1)
    [2009-07-20 15:52] upgraded ruby-libart (0.18.1-1 -> 0.19.0-2)
    [2009-07-20 15:52] upgraded samba (3.3.6-1 -> 3.3.6-2)
    [2009-07-20 15:52] upgraded sdl_image (1.2.7-1 -> 1.2.7-2)
    [2009-07-20 15:52] upgraded sauerbraten (2008_06_20_ctf_edition-1 -> 2009_05_04_trooper_edition-1)
    [2009-07-20 15:52] upgraded sdl_perl (2.1.3-4 -> 2.1.3-5)
    [2009-07-20 15:52] Fixing gshadow file ...
    [2009-07-20 15:52] upgraded shadow (4.1.3.1-1 -> 4.1.4.1-1)
    [2009-07-20 15:52] upgraded silly (0.1.0-2 -> 0.1.0-3)
    [2009-07-20 15:52] upgraded smc (1.8-1 -> 1.8-2)
    [2009-07-20 15:52] upgraded source-highlight (3.1-1 -> 3.1-2)
    [2009-07-20 15:52] warning: extracting /etc/sudoers as /etc/sudoers.pacnew
    [2009-07-20 15:52] upgraded sudo (1.7.1-2 -> 1.7.2-1)
    [2009-07-20 15:52] upgraded sunbird (0.9-1 -> 0.9-2)
    [2009-07-20 15:52] upgraded swftools (0.9.0-1 -> 0.9.0-2)
    [2009-07-20 15:52] upgraded syslog-ng (3.0.1-6 -> 3.0.3-1)
    [2009-07-20 15:52] upgraded texlive-bin (2008-4 -> 2008-5)
    [2009-07-20 15:52] upgraded tftp-hpa (5.0-2 -> 5.0-3)
    [2009-07-20 15:52] upgraded thunar (1.0.1-1 -> 1.0.1-4)
    [2009-07-20 15:53] upgraded thunderbird (2.0.0.21-1 -> 2.0.0.22-1)
    [2009-07-20 15:53] upgraded tightvnc (1.3.10-1 -> 1.3.10-2)
    [2009-07-20 15:53] upgraded transcode (1.1.0-5 -> 1.1.3-1)
    [2009-07-20 15:53] upgraded transmission-gtk (1.60-1 -> 1.72-1)
    [2009-07-20 15:53] upgraded usbutils (0.82-1 -> 0.84-1)
    [2009-07-20 15:53] installed libmtp (0.3.7-1)
    [2009-07-20 15:53] installed enca (1.9-4)
    [2009-07-20 15:53] installed libass (0.9.6-2)
    [2009-07-20 15:53] upgraded vlc (0.9.9a-5 -> 1.0.0-5)
    [2009-07-20 15:53] upgraded xfce4-clipman-plugin (1.0.1-1 -> 1.0.2-1)
    [2009-07-20 15:53] upgraded xfce4-power-manager (0.8.0-1 -> 0.8.2-1)
    [2009-07-20 15:53] upgraded xine-ui (0.99.5-4 -> 0.99.5-5)
    [2009-07-20 15:53] upgraded xmlrpc-c (1.06.33-1 -> 1.06.35-1)
    [2009-07-20 15:53] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
    [2009-07-20 15:53] upgraded xz-utils (4.999.8beta-3 -> 4.999.8beta-4)
    [2009-07-20 16:08] upgraded codecs (20071007-4 -> 20071007-6)
    [2009-07-20 16:09] upgraded muttprint (0.72d-8 -> 0.72d-9)
    [2009-07-20 16:11] upgraded openvpn-dev (2.1_rc15-2 -> 2.1_rc18-2)
    [2009-07-20 16:11] upgraded perl-xyne-arch (0.66-1 -> 0.68-2)
    [2009-07-20 16:11] installed rpmextract (1.0-3)
    [2009-07-20 16:14] Before using picasa you must accept the license.
    [2009-07-20 16:14] The license files are located in /usr/share/licences/picasa/
    [2009-07-20 16:14]
    [2009-07-20 16:14] NOTE:
    [2009-07-20 16:14] If you're not running gnome/kde please look at the hook files
    [2009-07-20 16:14] located in /opt/picasa/info.
    [2009-07-20 16:14] Edit them for your default filemanager/browser/email/mime-handling,
    [2009-07-20 16:14] and copy them to /opt/picasa/bin.
    [2009-07-20 16:14] If you're a gnome/kde user you should not modify these files.
    [2009-07-20 16:14] Picasa will use your default DE settings.
    [2009-07-20 16:14]
    [2009-07-20 16:14] upgraded picasa-beta (3.0_5744.02-1 -> 3.0_5744.02-3)
    [2009-07-20 16:14] upgraded powerpill (16.0-11 -> 16.0-12)
    [2009-07-20 16:24] synchronizing package lists
    [2009-07-20 16:24] starting full system upgrade
    [2009-07-20 16:25] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
    [2009-07-20 16:25] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
    [2009-07-20 16:25] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
    [2009-07-20 16:25] synchronizing package lists
    [2009-07-20 16:25] starting full system upgrade
    [2009-07-20 16:28] update desktop mime database... done
    [2009-07-20 16:28] update desktop applications database... done
    [2009-07-20 16:28] upgraded xaralx (0.7r1785-3 -> 0.7r1785-5)
    any suggestions on how to get more info?
    thanks
    Last edited by webframp (2009-07-21 18:32:58)

    That does appear to be my issue, I use jfs with no separate /boot
    Edit:
    The following steps fixed it:
    Mount your / (and /boot partition into this mount) from your Ach system, ex:
    sda2 (/) -> /mnt/arch
    sda1 (/boot)(if you have a own /boot) -> /mnt/arch/boot
    Do a chroot /mnt
    and therein a:
    pacman -U /var/cache/pacman/pkg/kernel26-2.6.30.1-1-x86_64.pkg.tar.gz (or i686)
    further details at the link above.
    Last edited by webframp (2009-07-21 18:32:14)

  • Lenovo E531 failing to boot after it crashed during a Windows 10 update.

    Hello guys, A few weeks back I signed up for the Windows 10 insider program and installed the windows 10 ISO without any problems. Of course there were the usual bugs that you get when working with a non-final build of a new OS, but that's not the problem here. A few days ago I received a new update, and after it was done downloading it prompted me to upgrade to the new version, which I complied to. Halfway the installation I suddenly get the "  Oops, something went wrong, we're collecting information and rebooting your pc" pop-up screen. The error had something to do with installing a driver. After it rebooted I just stared at a black screen. Since then I'm not able to boot into windows anymore. Bascially what happens is when i boot, i get the usual bios screen and the Lenovo splash screen. But followed by a black screen with absolute no information. Apart from one single '-' .When pressing 'enter' I hear a beep, and the "boot interruption" screen pops up with various options. Like booting into the Bios to change settings, and to temporarily chose a different boot device. Getting into the Bios settings is no problem, and i can change anything (I resetted the settings to default just to be sure, which didnt do anything). But as soon as I try to chose a different boot device, I get the same black screen. So I am not able to boot my windows 10 Preview installation DVD. I even tried booting without the HDD installed, which gave me the same screen again. I did all the diagnostics test from the lenovo diagnostics screen, which all resulted in no problems found. It recognizes the HDD, and the DVD when i get the Bios splash screen.  Does anyone have an idea on how to fix this? Thanks so much in advance.

    Thanks for the reply. I tried updating the BIOS by running the .exe on a different pc and burn the BIOS the a CD, and even tried a USB.The thing is that when i want to boot from a CD or USB. I never get the option to do so. Always a black screen.  I've contacted Lenovo support via phone and they told me that I had to buy a recovery disc from https://www.lenovorecovery.com. Which I did. The person on the telephone even told me that it didnt matter what the boot order was, This recovery disc would instantly boot. After i received these discs and tried to boot from them, it didn't work. Just as every other bootable DVD/USB I tried.See below for a pic from my laptop screen. Now I don't see any other option other than sending it to a repairshop to get the bios chip replaced... Any ideas?  Thanks! https://www.dropbox.com/s/sdln9jnysc8vmas/2015-08-10%2013.49.26.jpg?dl=0    

  • Arch Won't Boot After Kernel Upgrade

    I installed Arch on VirtualBox, but after upgrading the Kernel to 2.6.30 it wouldn't boot. It gets to "Loading udev...." and then VirtualBox crashes.

    Hello, I'm having this same problem, except I'm not using VirtualBox or VMWare, I have Arch installed to the hard drive. It worked fine after upgrading to 2.6.30, but after upgrading kernel-headers to 2.6.30.1-1, neither Arch NOR Arch-Fallback will boot! I don't even get to Udev or the part where the two arch logos are on top. It just starts up a little bit, then restarts my computer.
    I don't even know if my system has been wiped or something, but I doubt that; I think it's just the booting process. I do have a 2009.2 Live CD, but it's an FTP installation. Is there any way to start up my live CD and do a pacman -U for the old kernel version with the cache on my hard drive? How would I do this?
    Last edited by Allamgir (2009-07-07 00:32:12)

  • Restored 10.6 OS from CD and fails to Boot after Combo upgrade

    I have a clean install of Lion on my internal drive and an external clone of the HD from the previous Snow Leopard install. The Clone worked until I updated via the latest auto update. I have App's and other settings to transfer to Lion from this clone so want to get it working so I can ensure all the App's are upgraded to work on Lion or are deleted.
    After the external drive failed to boot I reinstalled the system from my Snow Leopard Install CD, not the 24-inch iMac (Mid 2007) restore CD.
    I then used Auto updater to install the combo and other updates to 10.6.8 this booted fine until I upgraded Safari 5.1 and Java - the last items that came up on the software updater. Upon restart, the boot failed in the last portion of the boot and at this point the Apple emblem went away and the round circle with diaginoal line apeared.
    On starting with the option key down, the clone disk 10.6.8 shows as being available, along with the internal Drive, for booting.
    Starting with "command + S" gets through to the last line of the process then states "waiting on Root"
    When compaired to a Snow OS that boots OK it is the last line of code before the curser is ready for entering a command.
    Can anyone tell me what to look for or how to repair this error so that I can get my data across to Lion. Thanks

    Well, in case anyone else has a similar problem I managed to fix the system by the following process:
    I reinstalled 10.6.0 from the retail Snow Leopard CD. The drive Booted OK but I needed to be upgraded to 10.6.8 to use the migration tool so I then upgraded using the Software Update utility. Boot failed again at this point and could not be fixed by anything I did.
    I then reinstalled 10.6.0 from the CD to try again, but the HD would not boot this time around.
    I downloaded CleanApp by Synium Software (http://www.syniumsoftware.com/cleanapp/) on a commendation from the famous eBook, "Take Control of installing Lion" by Joe Kissell of TidBits. I used this from my Lion HD to remove all orphan files, PPC files and Apps, and other junk. Snow Leapard still not Booting after repairs by various disk repair utilities including Apples.
    I Booted from my internal HD using Lion and ran SuperDuper to make a new Clone of the failed HD on a second external HD. Took a day and a night to run while I was at work, but the new clone would not boot at this stage so I ran SuperDuper again using the "Smart Update Backup" option. This just adds changed files or missing files to the clone. At the end of this process I had a running Clone that would boot on 10.6.0.
    I Booted from the second Clone and used the Software Update utility then to up grade in the two stages the Auto system used to bring my OS up to 10.6.8. This was successful and I had a Bootable Snow Leopard with no old Apps from which to Migrate my data.

  • Multiple Oracle Homes - Oracle Listener failes to start after installation

    Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
    ...\oracle\<SID>\<Ver>\NETWORK\ADMIN
    All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
    If they do not, manually change the ports and start the listeners.
    Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
    Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

    hi
    thanks for the help ,
    I have been using the SQL Server , i am totally blank about Oracle
    i am totally confused with this user, and hoststring
    i logged in to the enterprise manager using System and manager password
    But i cannot connect to any database using SQL Server
    i am not remembering any user name or password i have given during installation.
    the only thing i remember is
    Global databasename = (globedb) i have given
    For SID = globedb the same name i have given
    for sys ,i have given sysdb as password
    and for system i have given systemdb as password
    with this can i do anything
    when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
    if i want to login to the scott
    what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
    if any one can help me please help me
    thanks regards

  • Windows 7 will not boot after installation on mac pro

    I have a mac pro 2006, and wish to install windows7 on another internal drive, when I follow bootcamp to the point where it says load installation disc for windows 7, it tries to load, but then I get an empty folder with a question mark in it. So then I tried an install on just an internal hard drive not using bootcamp, this time it seems to do a full installation, but when it tries to restart I get a mac symbol, with a no entry sign, any help please.

    I can boot in windows safe mode, but, I cannot restart or finish the installation,
    for diskutil list i  got
      #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *500.1 GB   disk0
       1:               Windows_NTFS                         500.1 GB   disk0s1
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:                  Apple_HFS Hitachi 1000 master     1.7 TB     disk1s2
       3:       Microsoft Basic Data Windows                 279.1 GB   disk1s3
    for diskutil cs list I got
    diskutil cs list
    diskutil: did not recognize verb "cs"; type "diskutil" for a list

  • Snow Leopard not booting after installation in rEFIt triple boot system

    Hello,
    I have a Core Duo Mac mini, on which I was successfully using a rEFIt triple boot configuration with
    Leopard, Windows XP and Linux. After installing Snow Leopard on top of Leopard, Snow Leopard boots directly (without rEFIt showing up) the first time after installation. On the following reboots, rEFIt shows up but when selecting Mac OS, the system shows first the grey screen with the Apple icon, then it shows a grey screen with a "no access" icon and does not make any further progress. I reinstalled several times and at last I even removed rEFIt, but Snow Leopard won't boot anyway.
    Can anybody help? Thanks

    Welcome to Apple Discussions!
    I'd post a bug report here:
    http://sourceforge.net/tracker/?group_id=161917&atid=821764
    They could probably help isolate your problem.

  • Toshiba won't boot after Toshiba BIOS update

    My Satellite P755 would not boot immediately after I did the updates that the Toshiba update software recommended I do.  It still would not boot after going through the entire recovery process.  At this point I'm thinking it must be a hardware failure so I called toshiba.  
    They told me it would be $49.99 for telephone tech support to fix the issue but that would be refunded if it was determined to be a hardware issue.  The tech had me unplug the power, remove the battery and hold the power button down for 30 seconds (apparently this must remove the incorrect bios update or something).  After putting the battery back and plugging back in the recovery process worked and it now boots again.  
    I'm happy this worked but a little frustrated that I paid $49.99 to fix an issue that was not caused by me, it was caused by the Toshiba update software suggesting and installing an incorrect BIOS update, which was confirmed by the technician that I spoke with.  After talking to a rep and a supervisor I was denied a refund.  I've lost time, money, and data over this issue.  
    The tech also told me I should call Toshiba anytime I update software to make sure it will work with my computer, even if it's an update recommended by the Toshiba update software.

    Thanks to the original poster. I bought a laptop and I did the Bio update.  I had an issue on my old laptop and i took out the power supply and that worked.
    Now with this one after the update it would not turn on or do anything. I could not get to the bios or nothing as it was dead for the most part. It would trun on for a few seconds and I panicked as this is a lot of money to spend of a dead computer.
    I have limited income and I was beside myself. I thought after taking the battery out and putting it back it continued to do it that it was dead.  I picked me up and did a search on the web and eventually found this thread.  I did what the oriingal poster did. I think leaving the battery out so it resets is the primary issue. I did both the on button in case. Yeah I know it don't make sense but I did it.
    It is now working. It booted up and I am playing a CD in it. 
    My other laptop basically in direcly was stolen. Well not quite. I loaned it to my son and the car he had it in got impounded. I had my info on it so it could be returned but it was never retruned.  I would like it back as it was realiable but it had the same issue to turn on at one point. Battery taken out fixed it.
    I don't think I am going to do any more bios updates on it.  I hope there is no more of them.  I am not sure if it will shut off and power up right but since it is working now for the last five minutes It is ok. I am playing a CD on it.
    thanks to the poster of this thread.  You save me and my laptop. I love it.
    I did read bad reviews of it as well as good.  It is companies are doing anything to make a profit.  It is why I stand for the resource based economy where planned obsolence will be history.
    HUGS TO YOU GUYS.
    Barb

  • Flash Builder failed to lunch after installation.

    Adobe Flash Builder can't lunch after installation completed successfully. it says to uninstall and reinstall again. if problem continues, contact adobe support. and it says: "error: 5"
    ~ Then after I uninstalled it. Download it again and reinstall again, same result.  I did this numerous times now and no tech solutions so far!
    What is going on here and how to fix this? 

    don't worry, it works now, after i rebooted the machine.

  • Persistent USB Arch installation fails to boot after first shut down

    Hey all,
    I've recently installed Arch on a 32-GB USB flash drive (with the help of the wiki, of course).  I have some experience installing arch on my computers, so the process went relatively smoothly.  As some background info, I AM using UUIDs in both the bootloader and the fstab file, so that shouldn't be a problem.
    Anyways, the problem itself: I have arch installed and ready to go, and it boots up fine (the first time).  The thing is, after I shut down, if I try to boot the USB drive again, it simply hangs there-- no boot.  What's weirder is not only does it not boot, but it also freezes the host computer at that point in the boot cycle.  I mean, everything will be frozen up at the startup BIOS/splash whatever screen when the USB key is in, but once I take it out the computer will boot up regularly.  It's really strange.
    If I reinstall the bootloader on the USB drive then everything works again (that is, until I reboot).
    Is the bootloader somehow getting corrupted while shutting down?  I have tried using both GRUB and SYSLINUX (not at the same time of course) but they both behave the same.
    Any help would be greatly appreciated.
    Thank you for your time,
    Ushahin

    https://wiki.archlinux.org/index.php/Be … nvironment
    Here you need to set the right hooks if the root is on a USB drive, if you use RAID, LVM, or if /usr is on a separate partition.
    Did you remember to do this?
    If not, mount the partition(s) starting with the root partition first, chroot into it, edit that file and re-generate the initramfs. Then reboot with the reboot command, don't forcefully shut it down using the power button or something like that.
    It could also be a BIOS issue. Restore its defaults, set "Removable Dev." first, "CD-ROM" second (if you have an optical drive), "Internal Storage" third. Then select the USB stick as the first to boot in the boot priority screen.
    Last edited by DSpider (2012-10-12 07:07:30)

Maybe you are looking for