Arch freezes for a few seconds from time to time
It freezes for a 5-10 seconds and after that, everything work fine again. After one of these, I made dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.8-2-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfe70000-0x00000000cfe87fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe88000-0x00000000cfedbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P7P55D PRO, BIOS 2101 09/27/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfe70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfe6ffff]
[ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfe6ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfe6ffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfe6e000-0xcfe6ffff]
[ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[ 0.000000] ACPI: RSDP 00000000000fb970 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cfe70000 00044 (v01 092712 RSDT2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe70200 00084 (v01 092712 FACP2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cfe704a0 0EFF9 (v01 A1325 A1325001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfe88000 00040
[ 0.000000] ACPI: APIC 00000000cfe70390 000CC (v01 092712 APIC2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe70460 0003C (v01 092712 OEMMCFG 20120927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfe88040 00072 (v01 092712 OEMB2113 20120927 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cfe7f4a0 00038 (v01 092712 OEMHPET 20120927 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000cfe7f740 00034 (v06 092712 PerfTune 20120927 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cfe7f780 000B0 (v01 092712 OEMOSFR 20120927 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe896d0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffb000-0x12fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfe6ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13242 pages used for memmap
[ 0.000000] DMA32 zone: 834230 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe70000 - 00000000cfe88000
[ 0.000000] PM: Registered nosave memory: 00000000cfe88000 - 00000000cfedc000
[ 0.000000] PM: Registered nosave memory: 00000000cfedc000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85184 r8192 d21312 u131072
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031679
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4044444k/4980736k available (4908k kernel code, 788484k absent, 147808k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2675.033 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5352.98 BogoMIPS (lpj=8916776)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000036] Security Framework initialized
[ 0.000043] AppArmor: AppArmor disabled by boot time parameter
[ 0.000288] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001381] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001864] Mount-cache hash table entries: 256
[ 0.002041] Initializing cgroup subsys cpuacct
[ 0.002043] Initializing cgroup subsys memory
[ 0.002050] Initializing cgroup subsys devices
[ 0.002052] Initializing cgroup subsys freezer
[ 0.002053] Initializing cgroup subsys net_cls
[ 0.002055] Initializing cgroup subsys blkio
[ 0.002075] CPU: Physical Processor ID: 0
[ 0.002076] CPU: Processor Core ID: 0
[ 0.002080] mce: CPU supports 9 MCE banks
[ 0.002088] CPU0: Thermal monitoring enabled (TM1)
[ 0.002094] process: using mwait in idle threads
[ 0.002098] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.002220] Freeing SMP alternatives: 20k freed
[ 0.003096] ACPI: Core revision 20121018
[ 0.112660] ftrace: allocating 19310 entries in 76 pages
[ 0.121205] Switched APIC routing to physical flat.
[ 0.121576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154511] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[ 0.260220] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.260225] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.260226] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.260227] ... version: 3
[ 0.260228] ... bit width: 48
[ 0.260229] ... generic registers: 4
[ 0.260230] ... value mask: 0000ffffffffffff
[ 0.260231] ... max period: 000000007fffffff
[ 0.260232] ... fixed-purpose events: 3
[ 0.260233] ... event mask: 000000070000000f
[ 0.296840] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.283586] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.329957] Brought up 4 CPUs
[ 0.329961] smpboot: Total of 4 processors activated (21408.94 BogoMIPS)
[ 0.332774] devtmpfs: initialized
[ 0.333801] PM: Registering ACPI NVS region [mem 0xcfe88000-0xcfedbfff] (344064 bytes)
[ 0.334512] RTC time: 20:37:55, date: 04/26/13
[ 0.334555] NET: Registered protocol family 16
[ 0.334672] ACPI: bus type pci registered
[ 0.334724] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.334726] PCI: not using MMCONFIG
[ 0.334728] PCI: Using configuration type 1 for base access
[ 0.335208] bio: create slab <bio-0> at 0
[ 0.335263] ACPI: Added _OSI(Module Device)
[ 0.335265] ACPI: Added _OSI(Processor Device)
[ 0.335266] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.335267] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336392] ACPI: EC: Look up EC in DSDT
[ 0.337503] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.343814] ACPI: SSDT 00000000cfe880c0 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.344124] ACPI: Dynamic OEM Table Load:
[ 0.344126] ACPI: SSDT (null) 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.344194] ACPI: SSDT 00000000cfe891f0 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.344464] ACPI: Dynamic OEM Table Load:
[ 0.344466] ACPI: SSDT (null) 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.344718] ACPI: Interpreter enabled
[ 0.344722] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.344736] ACPI: Using IOAPIC for interrupt routing
[ 0.344751] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.345715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.354230] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.354321] ACPI: No dock devices found.
[ 0.354325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.354387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.354389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.354650] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.354672] PCI host bridge to bus 0000:00
[ 0.354674] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.354676] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.354677] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.354679] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.354681] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.354682] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.354684] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[ 0.354692] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.354741] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.354793] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.354844] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.354893] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.354938] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.354977] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.355036] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.355056] pci 0000:00:1a.0: reg 10: [mem 0xf7afe000-0xf7afe3ff]
[ 0.355139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.355164] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.355178] pci 0000:00:1b.0: reg 10: [mem 0xf7af8000-0xf7afbfff 64bit]
[ 0.355239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355258] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.355320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.355343] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.355405] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.355425] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.355487] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.355507] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.355569] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.355589] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.355651] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.355675] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.355694] pci 0000:00:1d.0: reg 10: [mem 0xf7afd000-0xf7afd3ff]
[ 0.355777] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.355796] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.355854] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.355965] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.355979] pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07]
[ 0.355986] pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883]
[ 0.355993] pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807]
[ 0.356000] pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483]
[ 0.356006] pci 0000:00:1f.2: reg 20: [io 0x9400-0x940f]
[ 0.356013] pci 0000:00:1f.2: reg 24: [io 0x9080-0x908f]
[ 0.356055] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.356068] pci 0000:00:1f.3: reg 10: [mem 0xf7afc000-0xf7afc0ff 64bit]
[ 0.356087] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 0.356117] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.356130] pci 0000:00:1f.5: reg 10: [io 0xac00-0xac07]
[ 0.356137] pci 0000:00:1f.5: reg 14: [io 0xa880-0xa883]
[ 0.356144] pci 0000:00:1f.5: reg 18: [io 0xa800-0xa807]
[ 0.356151] pci 0000:00:1f.5: reg 1c: [io 0xa480-0xa483]
[ 0.356158] pci 0000:00:1f.5: reg 20: [io 0xa400-0xa40f]
[ 0.356165] pci 0000:00:1f.5: reg 24: [io 0xa080-0xa08f]
[ 0.356249] pci 0000:05:00.0: [1002:94b3] type 00 class 0x030000
[ 0.356267] pci 0000:05:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.356281] pci 0000:05:00.0: reg 18: [mem 0xf7ee0000-0xf7eeffff 64bit]
[ 0.356291] pci 0000:05:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.356309] pci 0000:05:00.0: reg 30: [mem 0xf7ec0000-0xf7edffff pref]
[ 0.356355] pci 0000:05:00.0: supports D1 D2
[ 0.356381] pci 0000:05:00.1: [1002:aa38] type 00 class 0x040300
[ 0.356399] pci 0000:05:00.1: reg 10: [mem 0xf7efc000-0xf7efffff 64bit]
[ 0.356483] pci 0000:05:00.1: supports D1 D2
[ 0.360049] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.360056] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.360062] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.360070] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.360119] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.360184] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.360209] pci 0000:03:00.0: reg 10: [mem 0xf7dfe000-0xf7dfffff 64bit]
[ 0.360339] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.366705] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.366713] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.366785] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[ 0.366869] pci 0000:02:00.0: reg 24: [mem 0xf7cfe000-0xf7cfffff]
[ 0.366929] pci 0000:02:00.0: PME# supported from D3hot
[ 0.366961] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.366984] pci 0000:02:00.1: reg 10: [io 0xcc00-0xcc07]
[ 0.366997] pci 0000:02:00.1: reg 14: [io 0xc880-0xc883]
[ 0.367009] pci 0000:02:00.1: reg 18: [io 0xc800-0xc807]
[ 0.367022] pci 0000:02:00.1: reg 1c: [io 0xc480-0xc483]
[ 0.367035] pci 0000:02:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.367115] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.367123] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 0.367126] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.367130] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.367185] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.367200] pci 0000:01:00.0: reg 10: [io 0xb800-0xb8ff]
[ 0.367227] pci 0000:01:00.0: reg 18: [mem 0xdffff000-0xdfffffff 64bit pref]
[ 0.367244] pci 0000:01:00.0: reg 20: [mem 0xdfff8000-0xdfffbfff 64bit pref]
[ 0.367255] pci 0000:01:00.0: reg 30: [mem 0xf7bf0000-0xf7bfffff pref]
[ 0.367317] pci 0000:01:00.0: supports D1 D2
[ 0.367318] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373360] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.373366] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.373371] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.373380] pci 0000:00:1c.7: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.373426] pci 0000:06:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.373442] pci 0000:06:03.0: reg 10: [mem 0xf7fff800-0xf7ffffff]
[ 0.373451] pci 0000:06:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.373515] pci 0000:06:03.0: supports D2
[ 0.373517] pci 0000:06:03.0: PME# supported from D2 D3hot D3cold
[ 0.373556] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.373559] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.373563] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.373568] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.373569] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.373571] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.373572] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.373574] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.373578] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.373607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.373672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.373692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.373711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.373729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 0.373755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 0.373851] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.373980] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.373981] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.375033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.375068] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.375098] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.375130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.375162] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.375195] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.375227] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.375259] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.375325] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.375327] vgaarb: loaded
[ 0.375328] vgaarb: bridge control possible 0000:05:00.0
[ 0.375356] PCI: Using ACPI for IRQ routing
[ 0.376632] PCI: Discovered peer bus 3f
[ 0.376633] PCI: root bus 3f: using default resources
[ 0.376634] PCI: Probing PCI hardware (bus 3f)
[ 0.376654] PCI host bridge to bus 0000:3f
[ 0.376657] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.376658] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.376660] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.376665] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.376686] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.376703] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.376719] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.376736] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.376752] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.376768] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.376784] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.376800] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.376815] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.376830] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.376847] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.376862] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.376878] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.376894] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.376919] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.377167] PCI: pci_cache_line_size set to 64 bytes
[ 0.377245] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.377246] e820: reserve RAM buffer [mem 0xcfe70000-0xcfffffff]
[ 0.377322] NetLabel: Initializing
[ 0.377324] NetLabel: domain hash size = 128
[ 0.377325] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.377334] NetLabel: unlabeled traffic allowed by default
[ 0.377364] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.377370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.377375] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.379402] hpet: hpet2 irq 40 for MSI
[ 0.379449] hpet: hpet3 irq 41 for MSI
[ 0.379494] hpet: hpet4 irq 42 for MSI
[ 0.379532] hpet: hpet5 irq 43 for MSI
[ 0.379547] Switching to clocksource hpet
[ 0.383196] pnp: PnP ACPI init
[ 0.383206] ACPI: bus type pnp registered
[ 0.383245] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.383248] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.383272] pnp 00:01: [dma 4]
[ 0.383290] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.383314] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.383333] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.383356] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.383504] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.383507] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383675] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.383677] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.383679] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.383681] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.383685] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.383687] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.383689] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.383691] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383753] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.383801] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.383853] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.383856] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384021] pnp 00:0a: [dma 0 disabled]
[ 0.384071] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.384155] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.384157] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.384160] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384230] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.384233] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384383] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.384385] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.384387] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.384389] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.384391] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.384394] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.384484] pnp: PnP ACPI: found 14 devices
[ 0.384486] ACPI: ACPI bus type pnp unregistered
[ 0.390847] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.390850] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.390852] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.390859] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.390861] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.390868] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.390884] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.390886] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390888] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390889] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390891] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.390893] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.390896] pci 0000:00:1c.4: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.390899] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.390901] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.390903] pci 0000:00:1c.6: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.390905] pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.390907] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.390910] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.390912] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.390916] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.390919] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.390924] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.390926] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.390930] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.390933] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.390938] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.390940] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.390944] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.390947] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.390952] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 0.390954] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.390958] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.390961] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.390966] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.390968] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.390972] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.390975] pci 0000:00:1c.7: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.390980] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.390982] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.390986] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.391004] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[ 0.391009] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.391031] pci 0000:00:1e.0: setting latency timer to 64
[ 0.391034] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.391036] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.391038] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.391039] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.391041] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xf7ffffff]
[ 0.391042] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.391044] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.391045] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.391047] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.391049] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.391050] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.391052] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.391053] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.391055] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.391056] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.391058] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.391060] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.391061] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.391063] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.391064] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.391066] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.391067] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.391069] pci_bus 0000:06: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.391070] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.391072] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.391074] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.391075] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.391077] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xf7ffffff]
[ 0.391078] pci_bus 0000:06: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.391080] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.391081] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.391111] NET: Registered protocol family 2
[ 0.391243] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.391414] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.391554] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.391576] TCP: reno registered
[ 0.391582] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.391612] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.391696] NET: Registered protocol family 1
[ 0.391778] pci 0000:05:00.0: Boot video device
[ 0.391835] PCI: CLS 32 bytes, default 64
[ 0.391863] Unpacking initramfs...
[ 0.441719] Freeing initrd memory: 2960k freed
[ 0.442083] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.442086] software IO TLB [mem 0xcbe6e000-0xcfe6e000] (64MB) mapped at [ffff8800cbe6e000-ffff8800cfe6dfff]
[ 0.442413] audit: initializing netlink socket (disabled)
[ 0.442429] type=2000 audit(1367008675.236:1): initialized
[ 0.453950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.455230] VFS: Disk quotas dquot_6.5.2
[ 0.455270] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.455420] msgmni has been set to 7905
[ 0.455646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.455674] io scheduler noop registered
[ 0.455676] io scheduler deadline registered
[ 0.455680] io scheduler cfq registered (default)
[ 0.455959] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.455961] vesafb: scrolling: redraw
[ 0.455962] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.456350] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 5824k, total 5824k
[ 0.647099] Console: switching to colour frame buffer device 175x65
[ 0.836899] fb0: VESA VGA frame buffer device
[ 0.836908] intel_idle: MWAIT substates: 0x1120
[ 0.836913] intel_idle: v0.4 model 0x1E
[ 0.836914] intel_idle: lapic_timer_reliable_states 0x2
[ 0.836954] GHES: HEST is not enabled!
[ 0.837004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.857547] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.857890] Linux agpgart interface v0.103
[ 0.857949] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.860653] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.860678] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.860767] mousedev: PS/2 mouse device common for all mice
[ 0.860809] rtc_cmos 00:02: RTC can wake from S4
[ 0.860928] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.860953] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.861011] cpuidle: using governor ladder
[ 0.861077] cpuidle: using governor menu
[ 0.861079] EFI Variables Facility v0.08 2004-May-17
[ 0.861120] drop_monitor: Initializing network drop monitor service
[ 0.861187] TCP: cubic registered
[ 0.861270] NET: Registered protocol family 10
[ 0.861409] NET: Registered protocol family 17
[ 0.861416] Key type dns_resolver registered
[ 0.861612] PM: Hibernation image not present or could not be loaded.
[ 0.861619] registered taskstats version 1
[ 0.862279] Magic number: 9:644:650
[ 0.862314] acpi LNXCPU:03: hash matches
[ 0.862370] rtc_cmos 00:02: setting system clock to 2013-04-26 20:37:56 UTC (1367008676)
[ 0.863603] Freeing unused kernel memory: 820k freed
[ 0.863740] Write protecting the kernel read-only data: 8192k
[ 0.867252] Freeing unused kernel memory: 1224k freed
[ 0.868850] Freeing unused kernel memory: 440k freed
[ 0.875189] systemd-udevd[57]: starting version 202
[ 0.892310] ACPI: bus type usb registered
[ 0.892342] usbcore: registered new interface driver usbfs
[ 0.892360] usbcore: registered new interface driver hub
[ 0.892423] usbcore: registered new device driver usb
[ 0.892866] SCSI subsystem initialized
[ 0.893648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.894532] ehci-pci: EHCI PCI platform driver
[ 0.894561] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.894564] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.894571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.894582] ehci-pci 0000:00:1a.0: debug port 2
[ 0.898484] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.898499] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7afe000
[ 0.898661] ACPI: bus type scsi registered
[ 0.898703] libata version 3.00 loaded.
[ 0.898858] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.898861] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.898866] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.898889] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.899091] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.899097] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 0.899102] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 0.899107] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 0.899113] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 0.899819] xHCI xhci_add_endpoint called for root hub
[ 0.899821] xHCI xhci_check_bandwidth called for root hub
[ 0.899848] hub 2-0:1.0: USB hub found
[ 0.899854] scsi0 : pata_jmicron
[ 0.899855] hub 2-0:1.0: 2 ports detected
[ 0.899938] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.899941] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.900062] scsi1 : pata_jmicron
[ 0.900186] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 0.900188] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 0.900208] ahci 0000:02:00.0: version 3.0
[ 0.900337] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.900340] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.900704] scsi2 : ahci
[ 0.900906] scsi3 : ahci
[ 0.900954] ata3: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe100 irq 18
[ 0.900957] ata4: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe180 irq 18
[ 0.902648] xHCI xhci_add_endpoint called for root hub
[ 0.902650] xHCI xhci_check_bandwidth called for root hub
[ 0.902695] hub 3-0:1.0: USB hub found
[ 0.902705] hub 3-0:1.0: 2 ports detected
[ 0.908458] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.908560] hub 1-0:1.0: USB hub found
[ 0.908563] hub 1-0:1.0: 2 ports detected
[ 0.908684] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.908687] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.908692] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.908702] ehci-pci 0000:00:1d.0: debug port 2
[ 0.912614] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.912628] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7afd000
[ 0.921807] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.922200] hub 4-0:1.0: USB hub found
[ 0.922203] hub 4-0:1.0: 2 ports detected
[ 0.922286] ata_piix 0000:00:1f.2: version 2.13
[ 0.922301] ata_piix 0000:00:1f.2: MAP [
[ 0.922302] P0 P2 P1 P3 ]
[ 0.922329] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.922885] scsi4 : ata_piix
[ 0.923390] scsi5 : ata_piix
[ 0.923741] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.923745] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.923759] ata_piix 0000:00:1f.5: MAP [
[ 0.923760] P0 -- P1 -- ]
[ 0.923784] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.923951] scsi6 : ata_piix
[ 0.924274] scsi7 : ata_piix
[ 0.924564] ata7: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[ 0.924567] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[ 0.951836] firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.216364] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.216471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.221344] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.252180] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.263097] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.338351] hub 1-1:1.0: USB hub found
[ 1.338573] hub 1-1:1.0: 6 ports detected
[ 1.440700] tsc: Refined TSC clocksource calibration: 2674.966 MHz
[ 1.440707] Switching to clocksource tsc
[ 1.444033] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.451003] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c0001fee812, S400
[ 1.568045] hub 4-1:1.0: USB hub found
[ 1.568193] hub 4-1:1.0: 8 ports detected
[ 1.647191] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.713594] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.713610] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.713850] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.713865] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.730371] ata6.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL01, max UDMA/100
[ 1.743651] ata6.01: configured for UDMA/100
[ 1.747140] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.747145] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.747451] ata5.01: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.747455] ata5.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.770425] ata5.00: configured for UDMA/133
[ 1.783857] ata5.01: configured for UDMA/133
[ 1.784175] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.784487] scsi 4:0:1:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.785214] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.785230] sd 4:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.785268] sd 4:0:0:0: [sda] Write Protect is off
[ 1.785271] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.785299] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.785306] sd 4:0:1:0: [sdb] Write Protect is off
[ 1.785309] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.785344] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.788430] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL01 PQ: 0 ANSI: 5
[ 1.799605] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.799610] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.799918] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 1.822330] sdb: sdb1
[ 1.844330] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.850247] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 1.850284] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.913075] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[ 2.006263] usbcore: registered new interface driver usbhid
[ 2.006265] usbhid: USB HID core driver
[ 2.006767] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input0
[ 2.007103] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 2.079496] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[ 2.171602] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input1
[ 2.171731] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.177205] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input2
[ 2.177372] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.242439] usb 4-1.8: new high-speed USB device number 5 using ehci-pci
[ 2.594528] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.207207] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.222867] systemd[1]: Set hostname to <pc_escritorio>.
[ 3.790334] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.790374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.790385] systemd[1]: Starting Remote File Systems.
[ 3.790394] systemd[1]: Reached target Remote File Systems.
[ 3.790401] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 3.790410] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.790435] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.790443] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.790459] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.790465] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.790485] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.790492] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.790506] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.790528] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.790609] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.790617] systemd[1]: Starting Encrypted Volumes.
[ 3.790625] systemd[1]: Reached target Encrypted Volumes.
[ 3.790673] systemd[1]: Starting udev Kernel Socket.
[ 3.790691] systemd[1]: Listening on udev Kernel Socket.
[ 3.790732] systemd[1]: Starting udev Control Socket.
[ 3.790751] systemd[1]: Listening on udev Control Socket.
[ 3.790761] systemd[1]: Starting Journal Socket.
[ 3.790793] systemd[1]: Listening on Journal Socket.
[ 3.790803] systemd[1]: Starting Setup Virtual Console...
[ 3.816804] systemd[1]: Starting Load Kernel Modules...
[ 3.822519] systemd[1]: Mounting Huge Pages File System...
[ 3.829146] systemd[1]: Mounting Debug File System...
[ 3.842365] systemd[1]: Starting udev Coldplug all Devices...
[ 3.849326] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.895399] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.895425] systemd[1]: Starting Journal Service...
[ 3.899230] systemd[1]: Started Journal Service.
[ 3.899259] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.899297] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.899343] systemd[1]: Starting Create static device nodes in /dev...
[ 4.341801] systemd[1]: Starting Apply Kernel Variables...
[ 4.348053] systemd[1]: Expecting device dev-sda7.device...
[ 4.348073] systemd[1]: Started File System Check on Root Device.
[ 4.348087] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.354687] systemd[1]: Expecting device dev-sdc1.device...
[ 4.354699] systemd[1]: Expecting device dev-sda3.device...
[ 4.354710] systemd[1]: Expecting device dev-sda6.device...
[ 4.354720] systemd[1]: Expecting device dev-sdb1.device...
[ 4.544761] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 4.986815] FS-Cache: Loaded
[ 5.005162] RPC: Registered named UNIX socket transport module.
[ 5.005169] RPC: Registered udp transport module.
[ 5.005170] RPC: Registered tcp transport module.
[ 5.005171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.026296] FS-Cache: Netfs 'nfs' registered for caching
[ 5.068477] vboxguest: PCI device not found, probably running on physical hardware.
[ 5.082933] vboxguest: PCI device not found, probably running on physical hardware.
[ 5.086870] systemd-udevd[144]: starting version 202
[ 5.161623] [drm] Initialized drm 1.1.0 20060810
[ 5.634633] ACPI: Requesting acpi_cpufreq
[ 5.705282] ATK0110 ATK0110:00: EC enabled
[ 5.721889] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[ 5.721894] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721897] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[ 5.721900] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[ 5.721902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721903] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[ 5.721906] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[ 5.721908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.721925] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.725440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.725445] ACPI: Power Button [PWRB]
[ 5.725478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.725480] ACPI: Power Button [PWRF]
[ 5.802281] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.836904] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.890984] wmi: Mapper loaded
[ 5.899753] EDAC MC: Ver: 3.0.0
[ 5.908589] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 5.908619] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 5.908624] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.972216] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.060583] iTCO_vendor_support: vendor-support=0
[ 6.067690] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.067855] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 6.068097] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.281028] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284040] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284351] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 6.284686] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.288648] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 6.320963] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.321254] r8169 0000:01:00.0: irq 50 for MSI/MSI-X
[ 6.321397] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90000614000, 00:26:18:9c:ba:13, XID 083000c0 IRQ 50
[ 6.321399] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.441337] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.685343] [drm] radeon defaulting to kernel modesetting.
[ 6.685346] [drm] radeon kernel modesetting enabled.
[ 6.685378] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 6.685379] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 6.685392] Console: switching to colour dummy device 80x25
[ 6.685607] [drm] initializing kernel modesetting (RV740 0x1002:0x94B3 0x174B:0x1250).
[ 6.685637] [drm] register mmio base: 0xF7EE0000
[ 6.685638] [drm] register mmio size: 65536
[ 6.685702] ATOM BIOS: WALDEN
[ 6.685719] radeon 0000:05:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 6.685720] radeon 0000:05:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 6.685724] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 6.685725] [drm] Detected VRAM RAM=512M, BAR=256M
[ 6.685726] [drm] RAM width 128bits DDR
[ 6.685762] [TTM] Zone kernel: Available graphics memory: 2024954 kiB
[ 6.685764] [TTM] Initializing pool allocator
[ 6.685768] [TTM] Initializing DMA pool allocator
[ 6.685783] [drm] radeon: 512M of VRAM memory ready
[ 6.685784] [drm] radeon: 512M of GTT memory ready.
[ 6.685795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.685795] [drm] Driver supports precise vblank timestamp query.
[ 6.685841] radeon 0000:05:00.0: irq 51 for MSI/MSI-X
[ 6.685850] radeon 0000:05:00.0: radeon: using MSI.
[ 6.685879] [drm] radeon: irq initialized.
[ 6.685882] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.686519] [drm] probing gen 2 caps for device 8086:3b42 = 1/0
[ 6.686545] [drm] Loading RV730 Microcode
[ 6.783110] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.783186] radeon 0000:05:00.0: WB enabled
[ 6.783189] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880128cefc00
[ 6.783191] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880128cefc0c
[ 6.829909] [drm] ring test on 0 succeeded in 1 usecs
[ 6.829970] [drm] ring test on 3 succeeded in 1 usecs
[ 6.830184] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.830211] [drm] ib test on ring 3 succeeded in 0 usecs
[ 6.830369] [drm] Radeon Display Connectors
[ 6.830370] [drm] Connector 0:
[ 6.830371] [drm] VGA-1
[ 6.830372] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.830373] [drm] Encoders:
[ 6.830374] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.830375] [drm] Connector 1:
[ 6.830376] [drm] HDMI-A-1
[ 6.830376] [drm] HPD4
[ 6.830377] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 6.830378] [drm] Encoders:
[ 6.830379] [drm] DFP2: INTERNAL_UNIPHY1
[ 6.830380] [drm] Connector 2:
[ 6.830380] [drm] DVI-I-1
[ 6.830381] [drm] HPD1
[ 6.830382] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 6.830383] [drm] Encoders:
[ 6.830384] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.830384] [drm] DFP1: INTERNAL_UNIPHY
[ 6.830410] [drm] Internal thermal controller with fan control
[ 6.830449] [drm] radeon: power management initialized
[ 6.879370] media: Linux media interface: v0.10
[ 6.886455] Linux video capture interface: v2.00
[ 6.903939] [drm] fb mappable at 0xE0142000
[ 6.903940] [drm] vram apper at 0xE0000000
[ 6.903941] [drm] size 8294400
[ 6.903942] [drm] fb depth is 24
[ 6.903943] [drm] pitch is 7680
[ 6.904015] fbcon: radeondrmfb (fb0) is primary device
[ 6.948625] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[ 7.010583] Bluetooth: Core ver 2.16
[ 7.010594] NET: Registered protocol family 31
[ 7.010595] Bluetooth: HCI device and connection manager initialized
[ 7.010600] Bluetooth: HCI socket layer initialized
[ 7.010602] Bluetooth: L2CAP socket layer initialized
[ 7.010605] Bluetooth: SCO socket layer initialized
[ 7.040876] usbcore: registered new interface driver btusb
[ 7.073485] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7.081837] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.091110] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.102993] Console: switching to colour frame buffer device 240x67
[ 7.117325] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 7.117327] radeon 0000:05:00.0: registered panic notifier
[ 7.117330] [drm] Initialized radeon 2.29.0 20080528 for 0000:05:00.0 on minor 0
[ 7.142964] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.143057] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.143144] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.143224] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.143294] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.143370] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.143441] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.143515] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.143759] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[ 7.143890] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[ 7.154101] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:05:00.1/sound/card1/input14
[ 7.161734] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.2/input/input15
[ 7.162124] usbcore: registered new interface driver uvcvideo
[ 7.162126] USB Video Class driver (1.1.1)
[ 7.217631] usbcore: registered new interface driver snd-usb-audio
[ 8.045197] fuse init (API version 7.20)
[ 8.116662] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 8.190859] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 8.262115] Adding 995992k swap on /dev/sda7. Priority:-1 extents:1 across:995992k
[ 8.486625] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.408512] r8169 0000:01:00.0 eth0: link down
[ 9.408517] r8169 0000:01:00.0 eth0: link down
[ 9.408539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.868316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.868325] Bluetooth: BNEP socket layer initialized
[ 10.959362] systemd-logind[336]: Watching system buttons on /dev/input/event4 (Power Button)
[ 10.959417] systemd-logind[336]: Watching system buttons on /dev/input/event3 (Power Button)
[ 11.032246] Bluetooth: RFCOMM TTY layer initialized
[ 11.032256] Bluetooth: RFCOMM socket layer initialized
[ 11.032257] Bluetooth: RFCOMM ver 1.11
[ 11.160493] r8169 0000:01:00.0 eth0: link up
[ 11.160504] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.092853] vboxdrv: Found 4 processor cores.
[ 13.093515] vboxdrv: fAsync=0 offMin=0x403 offMax=0x26059
[ 13.093618] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 13.093620] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 13.182193] vboxpci: IOMMU not found (not registered)
[ 27.665111] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[ 27.975143] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
Can be due to the last two? How can I fix it?
+1 for HDD. Recommend you use smartmontools to understand if errors have been thrown. Here is an example of errors on one of my machines:
# smartctl --all /dev/sda
Error 442 occurred at disk power-on lifetime: 24196 hours (1008 days + 4 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 51 00 c3 8d 75 e1 Error: UNC at LBA = 0x01758dc3 = 24481219
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
c8 00 08 c0 8d 75 01 00 01:10:53.771 READ DMA
ca 00 08 b8 8d 75 01 00 01:10:53.770 WRITE DMA
c8 00 08 b8 8d 75 01 00 01:10:53.770 READ DMA
ca 00 08 b8 8d 75 01 00 01:10:53.770 WRITE DMA
c8 00 08 b8 8d 75 01 00 01:10:53.769 READ DMA
Smartctl can do short test and if completes without errors, try a long test. Still no errors? Good. You can look around for bad sectors on each partition `e2fsck -cckx /dev/sdXX`
EDIT: ...usually dmesg will show you when bad things are happening with your filesystem and bad blocks. I recently had to recover a system that suffered this fate and the dmesg output was rich with these errors.
% sudo e2fsck -cckv LABEL=archlive
e2fsck 1.42.7 (21-Jan-2013)
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: done
arch32: Updating bad block inode.
Pass 1: Checking inodes, blocks, and sizes
Running additional passes to resolve blocks claimed by more than one inode...
Pass 1B: Rescanning for multiply-claimed blocks
Multiply-claimed block(s) in inode 404766: 3658656
Pass 1C: Scanning directories for inodes with multiply-claimed blocks
Pass 1D: Reconciling multiply-claimed blocks
(There are 1 inodes containing multiply-claimed blocks.)
File /usr/share/icons/gnome/icon-theme.cache (inode #404766, mod time Mon Apr 22 16:01:20 2013)
has 1 multiply-claimed block(s), shared with 1 file(s):
<The bad blocks inode> (inode #1, mod time Mon Apr 22 16:19:28 2013)
Clone multiply-claimed blocks<y>? yes
Error reading block 3658656 (Attempt to read block from filesystem resulted in short read). Ignore error<y>? yes
Force rewrite<y>? yes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #0 (22605, counted=22604).
Fix<y>? yes
Free blocks count wrong for group #111 (6069, counted=6070).
Fix<y>? yes
arch32: ***** FILE SYSTEM WAS MODIFIED *****
105142 inodes used (11.46%, out of 917504)
516 non-contiguous files (0.5%)
41 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 92177/120
1051659 blocks used (28.66%, out of 3670016)
3 bad blocks
1 large file
84048 regular files
7976 directories
0 character device files
0 block device files
0 fifos
1494 links
13107 symbolic links (12835 fast symbolic links)
2 sockets
106627 files
Long story short, I had to reinstall to another partition despite locking out these badblocks. I do not think this is your problem as I stated above. See what smartlctl says on the short and long tests.
Last edited by graysky (2013-04-27 16:50:10)
Similar Messages
-
Applications randomly freeze for a few seconds?!
Hi guys,
I have had nothing but trouble with this most recent iMac I purchased 4 months ago. It's the 24" described in my profile. AppleCare came out and recently replaced my faulty HDD, and put a 500gb Hitachi in (replacing 500gb Seagate).
Anyway, for no reason, after a fresh install and all the updates, applications will freeze for a few seconds and show the spinning beach ball- doesn't matter what application (Wow, Safari, Quicktime, Skype, Adium, etc.)- anything! I can see in activity monitor that there is a spike in the disk activity at the time, but cannot explain why. It's a brand new hard-drive! Interestingly, there is no corresponding jump in CPU or RAM access, so it's obviously some kind of data-dump issue with the HDD....the new HDD...
Looking in Activity Monitor, it appears to be the data read/sec that is spiking.
This is extremely frustrating, and I thought the new HDD would solve this, but apparently not. I don't particularly wish to reinstall OSX, and AppleCare in Australia is shut at the moment (midnight)
Does anyone know of a solution, or why it's happening?
I never had ANY of these problems with my first 24" that I bought late last year, with stock everything (hdd, gfx, etc.)....I feel like this one is faulty by nature....
Thanks!
EDIT: http://forums.mactalk.com.au/showthread.php?t=36763 shows my original HDD issue with the previous HDD....you can see this *****Charles Minow wrote:
kendals wrote:
Hmm, I actually think it might be this new HDD that has been installed. Whenever it wakes from sleep, it takes a MUCH longer time than my previous machine, and even my previous hdd which was faulty.
And I can hear it first start to spin the HDD up in a little whir, then the clicky sorta bits where it is reading it, and then finally after the spinning ball, it gives me the PWD screen.
It has to be the HDD. Calling Apple in the morning...
Sound like that could be a HDD problem. One way to confirm it is to look at the Console application from your Utilities folder. Look at the System Log and Console Log and see if you see any lines with text like "disk0s2: I/O error." at the times when you see the freezes and hear the clicks. Note that the numbers in the disk0s2 part can change, depending on how your drives are set up.
charlie
Charles Minow wrote:
kendals wrote:
Hmm, I actually think it might be this new HDD that has been installed. Whenever it wakes from sleep, it takes a MUCH longer time than my previous machine, and even my previous hdd which was faulty.
And I can hear it first start to spin the HDD up in a little whir, then the clicky sorta bits where it is reading it, and then finally after the spinning ball, it gives me the PWD screen.
It has to be the HDD. Calling Apple in the morning...
Sound like that could be a HDD problem. One way to confirm it is to look at the Console application from your Utilities folder. Look at the System Log and Console Log and see if you see any lines with text like "disk0s2: I/O error." at the times when you see the freezes and hear the clicks. Note that the numbers in the disk0s2 part can change, depending on how your drives are set up.
charlie
Thanks, Charles.
Looking at the Console log, it doesn't seem to have any i/o errors. Since both logs are quite lengthy, and the quoting system here is a bit akward, I've linked them:
Console.log: http://www.miraclesalad.com/webtools/clip.php?clip=e04
System.log: http://www.miraclesalad.com/webtools/clip.php?clip=e06
Couldn't really see anything there, but have a look if you'd like. Looking forward to calling Apple Support today and finding out what the deal is...only just got this new HDD put in! -
Macbook freezes for a few seconds
I have a macbook pro (mac OS 10.7.5). As I use it ,the colorful spinning ball appears for no reason and the mac freezes for a few seconds. When I write something, when i use Itunes ,when i scroll down it happens everytime. I did a format on my hard drive but nothing change. Does anybody know what is going wrong?
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Freezing for a few seconds after switching tabs, freezing for a second without doing anything.
Hello
I use Firefox v. 25.0 (If i remember correctly I had this problem at 24 too) and I my browser freezes for a few seconds, maybe every 10 seconds. It only freezes for about give or take, 3 or 4 seconds but it is starting to bug me.
I have tried
-> Safe mode - still happens in safe mode.
-> Restarting firefox (multiple times) - The last few restarts I have removed/disabled any add ons or extentions. It always starts with out the freezing, but maybe after 1 or 2 days the freezing comes back again. This time I'm just half way done with it so I haven't bothered to disable much.
-> Checking for multiple duplicated files in the firefox folder - didn't have any.
I apologize that this is a commonly asked question, but I wanted to see if I could get any help here before having to move to chrome (which is not recommended from my sister), or internet explorer (which is in my recycle bin...)
Thank you in advance.Although your IE shortcut might be in the recycle bin, you'll still want to have IE installed for those special sites that only support IE...
Do you usually have a lot of tabs open? By default, Firefox updates the file which stores open windows and tabs every 15 seconds. The larger this file gets, the longer this takes. A major overhaul was made for Firefox 25 to make this more efficient, so this might not be your issue, but you can stretch the interval out to 60 seconds and see whether that makes a difference. Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''session''' and pause while the list is filtered
(3) Double-click '''browser.sessionstore.interval''' and change the value from 15000 to 60000 (this value is in milliseconds: 15000/1000 = 15 seconds, 60000/1000 = 60 seconds). I don't know whether this takes effect immediately or the next time you start Firefox.
Does that help?
If that doesn't make much/any difference, have you set up Firefox Sync? -
Mavericks freezing for a few seconds in intervals
I've just upgraded to Mavericks and I'm having an issue with it freezing for a few seconds at random intervals. happens almost everytime I switch desktops too.
herer's my system spec :
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
360ControlDaemon - Path: /Library/StartupItems/360ControlDaemon
M-Audio Firmware Loader - Path: /Library/StartupItems/M-Audio Firmware Loader
MolCp3Startup - Path: /Library/StartupItems/MolCp3Startup
PACESupport - Path: /Library/StartupItems/PACESupport
tun - Path: /Library/StartupItems/tun
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 0:14:50
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (24.56 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1)
com.paceap.kext.pacesupport.snowleopard (5.9)
com.protech.NoSleep (1.3.1)
net.osculator.driver.OSCulatorIOKit (1.5.1)
com.Cycling74.driver.Soundflower (1.6.2)
com.splashtop.driver.SRXDisplayCard (1.6)
net.telestream.driver.TelestreamAudio (1.0.5)
com.vara.driver.VaraAudio (1.0.3)
com.splashtop.driver.SRXFrameBufferConnector (1.6)
foo.tun (1.0)
com.logmein.hamachi (1.0)
com.aladdin.kext.aksfridge (1.0.2)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.aladdin.aksusbd.plist
[loaded] com.aladdin.hasplmd.plist
[loaded] com.autodesk.backburner_manager.plist
[loaded] com.autodesk.backburner_server.plist
[loaded] com.autodesk.backburner_start.plist
[not loaded] com.barebones.bbedit.plist
[loaded] com.bresink.system.securityagent3.plist
[loaded] com.cleverfiles.cfbackd.plist
[loaded] com.github.GitHub.GHInstallCLI.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.leapmotion.leapd.plist
[loaded] com.logmein.hamachi.plist
[failed] com.opengarden.meshclient.plist
[loaded] com.paceap.eden.licensed.plist
[loaded] com.rim.BBDaemon.plist
[failed] com.splashtop.streamer.SRServiceDaemon.plist
[failed] com.tidalpoolsoftware.macproxy.kext.plist
[loaded] com.tvmobili.tvmobilisvcd.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
[loaded] PACESupport.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.flipvideo.FlipShare.AutoRun.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.leapmotion.Leap-Motion.plist
[loaded] com.logmein.hamachimb.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[failed] com.splashtop.streamer.SRServiceAgent.plist
[failed] com.tidalpoolsoftware.macproxy.application.plist
[loaded] com.tvmobili.artwork.plist
[loaded] com.wacom.wacomtablet.plist
[loaded] net.culater.SIMBL.Agent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[failed] com.akamai.client.plist
[loaded] com.akamai.single-user-client.plist
[failed] [email protected]
[loaded] com.facebook.videochat.Caius.plist
[failed] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
[failed] net.sourceforge.tvshows.plist
[failed] ws.agile.1PasswordAgent.plist
User Login Items:
3DconnexionHelper
Dropbox
Sony Ericsson Bridge Helper
KiesAgent
fuspredownloader
3rd Party Preference Panes:
3Dconnexion
Flash Player
MacFUSE
Perian
Internet Plug-ins:
CitrixICAClientPlugIn.plugin
Default Browser.plugin
JavaAppletPlugin.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
LogMeIn.plugin
LogMeInSafari32.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
WacomNetscape.plugin
WacomSafari.plugin
ZigJS.plugin
User Internet Plug-ins:
iGetterBundle.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 474.69 GB
Destinations:
Seagate Expansion Drive [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 5
Oldest backup: 2012-10-28 09:00:40 +0000
Last backup: 2013-10-26 18:21:53 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 474.69 GB X 3)
Top Processes by CPU:
348% Unity
6% Google Chrome
4% WindowServer
3% coreaudiod
2% Finder
1% EtreCheck
1% hidd
0% BBLaunchAgent
0% Dropbox
0% mds_stores
Top Processes by Memory:
1.12 GB Unity
1.02 GB Finder
279 MB Google Chrome
246 MB mds_stores
246 MB com.apple.IconServicesAgent
213 MB mono
164 MB softwareupdated
115 MB Sublime Text 2
115 MB WindowServer
82 MB Dropbox
Virtual Memory Statistics:
4.13 GB Free RAM
6.36 GB Active RAM
3.53 GB Inactive RAM
1.97 GB Wired RAM
12.80 GB Page-ins
0 B Page-outsThanks for you post, I was under the impression that one of the new macbook pro's comes with 16GB RAM out of the box.
I'll try your solution although I feel like is rather utilise the RAM I've paid for.
http://us.battle.net/wow/en/forum/topic/10462096123 Suggested that it's possibly the new memory compression causing the issues. This seems to fit, because I'm a game developer I tend to have quite a lot of memory intensive applications running.
Will report back if I find a solution, if there are any more suggestions I'm all ears. -
When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening
Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.2.1.1
Application Timestamp: 4d756476
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.3
Fault Module Timestamp: 4d4d9a00
Exception Code: c0000005
Exception Offset: 0034a672
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160 -
Acrobat 7 freezes for a few seconds at every startup
I am hoping someone can please enlighten me as to why Acrobat 7 freezes for a few seconds everytime the program is started. If starting the program directly from executing the associated pdf file, the program loads the first page, freezes (stops responding) for approx 6 to 8 seconds, then responds to user interface again.
It is not the machine as I have the same problem on many different machines. Help please.Disabling hardware acceleration seemed to solve the problem. Thank you all very much, but before I close this thread as solved, I've always had that feature enabled to the best of my knowledge. Why did it suddenly cause problems?
-
File selection dialog box freezes for a few seconds
When I try to open files / select files from within certain applications (e.g. Aperture, Photomatix) the file selection dialog box freezes for a few seconds which becomes irritating because I can't scroll to the actual file that I want very easily .)
(I notice the problem generally when I am working in photo editing applications. And yes, I do have some 25MB TIFFs in the target folder...)
I suppose this is because the finder is "loading" a preview of the files.
Does this happen to everyone (if so, it would be quite a Windows-like irritation untypical of OSX).
If not, then what could be going wrong here?I have answered my own question by a bit more research.
It seems a lot of people having this trouble for a while. It is down to Logitech software. Specifically the Logitech Control Center.
See this forum (last entry):
http://bit.ly/eEomwp
The simple solution: uninstall Logitech Control Center. The mouse still works without it. -
Iphone freezes for a few seconds after unlocking HELP PLEASE
This problem barley started today i have never dropped my phone or anything so i dont know why its acting like this. It has IOS 5.0.1.
It seems to lag when slidding to unlock and when it unlocks and goes to the homescreen it goes black and freezes for a few seconds and it barley started today.
Any advice on what to doBasic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?
-
Please help: Mouse cursor on MBP repeatedly freezing for a few seconds
Hi all
I bought a MBP last week, and today I started experiencing problems with the mouse cursor. No matter whether I'm using the trackpad or an external mouse (I've tried using both a wired Mighty Mouse and a wireless Logitech), when I'm moving the cursor it keeps freezing for a few seconds (perhaps less than a second), and then I "regain" control of it, only for it to freeze again after a short while.
The only thing that I can think of that might have something to do with this is that I replaced the 2GB of Apple RAM with 4GB of OWC RAM a couple of days ago. Can this be the reason?
Please help me, as this problem renders the computer impossible to use:(
Thanks in advance
Daniel
PS: I'm running Mac OS 10.5.1 and I've got the Keyboard Freeze Update Installed.Hi.
I have a similar problem, however I realized it is somehow related to weather the airport is on. If I turn it off, there are no freezes. It is weird, and I'm going to go with it to Apple. -
Long click to select an alternate tool, the flyout freezes for a few seconds
When I long click to select an alternate tool, the flyout freezes for a few seconds before I can select a tool. How can I fix this? My only work around right now is to know the tool shortcut and then to cycle through it with shift+tool shortcut.
Thanks,
ZackSo I don't know what happened. This has been the case ever since I can remember, but today I got a wacom tablet and now the tablet and the mouse can use the sidebar as normal. All I can assume is that the drivers for the tablet fixed some preference list file error...
-
Qosmio F20: MCE picture freezes for a few seconds
my f20 my media centre tv picture freezes for a few seconds then the processors fan kicks in and the picture comes back. is this connected I have checked the ariel on other devices and the signal is ok
Hello
In my opinion the picture freezes for a few seconds because the CPU starts a new background process. As far as I know similar issues occur if the CPU performance usage goes to 100%. -
IPod freezes for a few seconds but the sound continues playing
Hello!
I recently transfered a large MP4 onto my iPod, and I found that the playback on the iPod occasionally freezes for a few seconds, and then continues playing, but the sound continues throughout. The same video plays OK on iTunes without any freezing. Could somebody help me please?
Yours faithfully,
Norman Tangi had the same problem on my 1.1 firmware but when i updated it,there was nothing like this.
-
When workign with video, logic freezes for a few seconds then playbacks
Dear all,
When i am working with video in logic 9.1, the playback freezes for a few seconds and then plays smoothly. This is irritating as when u score for movies, u cant sync the sounds. I tried converting the mov file into various formats, but still no luck. Strangely, the demos given with logic(the ones with videos) plays smoothly without the freezing.. pls help ...
thanks
Message was edited by: Rishikesh hariKen,
Yes , you were right. i researched on video formats and found, logic will only support uncompressed video formats. Like u said, i opened quicktime and exported my movie to DV coding. It works fine.. I also found out that, to have less CPU load, convert you video to "photo jpeg" coding.. Its smoother !!!1
Cheers -
Voice Signal Goes Dead for a Few Seconds From Time to Time
I live in a rural part of Marin County that has poor signal: one bar or less. I've purchased a signal booster which has increased my bar level to 4 -- which is terrific. What I'm noticing however is that the voice signal goes dead for a few seconds (5 - 10 seconds) during a conversation. This happens every few minutes. Voice connectivity then returns for a few minutes only to cut off again for a few seconds and so on. This happens if I'm inside my house. If I go outside, it doesn't seem to happen. I've turned the booster box this way and that but no change. I've also changed the ariel this way and that, but no change. What's up with this? It's very annoying to be on a call and have the sound go dead.
Hi yraglleb - Let's keep your audio clear and consistent! What model is your Network Extender? May I also ask the current iOS version of your device? Check Settings>General>About. Have you tested other phones on the same Extender? I look forward to getting this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport
Maybe you are looking for
-
Mass change of Vendor Line Items Payment Terms
Hi all We are trying to make a mass change of payment terms for vendor line items. We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed. The log gives us the following error
-
I have a problem with audio CDs. After updating to 10.4.3, iTunes did not play my audio CDs. It has the spinning beachball for ever. I have tried the following. 1. Removed the "CD Info.cidb" file from Library/Preferences, but no help. 2. Installed 10
-
Best way to create multiple windows
Just for a learning experience i am trying to make an application that starts out as a window with a button.When you click the button it creates another window of the same size but with the no decorations. What would the best way to go about this be?
-
Testing BC4J - Newbie Question
Hi all, Maybe this is a stupid question: can i put a System.out.println() call into a bc4j method and will this print out to the console when run either in the bc4j tester or in a JSP front-end? Or, how could i check if certain methods in the EO are
-
UNINSTALL / DELETE TRIAL VERSION AND OLD VERSIONS (mac)
How can I remove all the old versions and the trial version of the programs. I paid for the CD version and when I downloaded the trial some of it didnt go in correctly. So I want to assure it is all gone before I put the paid version in. (Paintshop P