Arch get freeze while wifi on

Hi,
I dont know what to say, My notebook gets freeze(I cant do anything, I have to manually reboot) ~15 sec after it connects to my wifi network (during these 15sec, I can normally use this connection, e.g ping google ;d)
$ lspci | grep Bro
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
I am using kernel drivers "brcm80211" (brcmsmac/brcmfmac )
according to this https://wiki.archlinux.org/index.php/Broadcom_wireless there are other drivers, and I will try them, but I wanted to post about it because this freeze is really unpleasant, and maybe its cause by something else which I wont find out alone ;/
Regards
Last edited by chosen (2013-08-25 21:43:15)

Please search before posting. This has been covered many times in the past week or so, and there is a giant thread about the issue floating around here somewhere (with solutions).

Similar Messages

Bex Query getting Freezed while formatting results

Hi Friends,
I am running a BEx Query with one year data selection but it's getting freezes while formatting results. But when i deselect the 'Format after refresh' option in the query properties..then query is running fine.
Could you please let me know if there is any reason for this?
Regards,
Mahesh

Hi,
Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
By selecting your multiprovider .
Thanks,
Ranjan

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

[SOLVED] ARCH Install Freezes While making fallback image

Hi,
I am having some issues install arch on my desktop, the install is freezing while generating the 'fallback' image, this makes no sense to me as it has just compiled the main image, and should be the exact same.
I have run memtest x86 on each stick of ram (one at a time, and both in at the same time) with no errors.
I have tried both the X86_64 and the i686 both on CD and USB, and the install froze during the fallback kernel every time.
I am using the 2009.08 versions. and have downloaded the images from both mirror.internode and the main arch website link.
I have tried Zero filling the hard-drive with seatool, and it has passed a S.M.A.R.T HDD test (also on seatools)
I am just about to try a different distro just to check. I had arch installed last week but something went incredibly wrong during the last update, so i chose to format it and start fresh.
Any ideas?
Last edited by viruzeno (2010-02-09 12:11:29)

I have Worked out the problem. it seems my new blu-ray burner is having issues with linux, i need to track down a driver.
I disconnected the drive and the install finished fine. not too sure how it was causing the error.

Arch Linux freezes while loading modules

Hello,
I'm having a problem loading Arch.The loading stops while loading the modules and I get get a bug:
BUG: Unable to handle kernel paging request at virtual address 7c8b1738
I used the "Don't Panic"-Installer.
Here's my pastebin for more details:
http://pastebin.archlinux.org/20334
Actually I also had a lot of problems with the installation. It wouldn't work until I manually issued the commands mkswap and swapon.
http://pastebin.archlinux.org/20297
I don't know if the loading-problem is derived from the installation-problem, and therefore don't know if this is posted in the right place.
Specs:
Ibm thinkpad x31
Intel Pentium M 1.6 gHz
512 MB
ATI Mobility
I'm coming straight from Ubuntu, so I'm not really a hardcore Linux-user, but I'm learning and hope to be able to have a full-working installation of Arch up and going soon.
Kind regards,
Daniel

I reinstalled Arch(Base-packs only), but I still get the message: "BUG: Unable to handle kernel paging request at virtual address xxxxxxxx". The number changes each time.
I was actually able to load Arch successfully one time, and log in as root. Then I changed the locale in rc.conf, uncommentet in locale.gen and rebootet. And there it was again. I tried to change the values back to what they were before I changed them via PXE, but it still wouldn't work. I then tried to reinstall, but I still get the same message. Allthough, the installer-program runs without errors and I don't have to issue mkswap- and swapon-commands manuallly now. At least the installprosess seems to work now
Oh, and by the way... Kubuntu and XP runs without issues on my pc.

My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am un to date on the OS also.

My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am up to date on the OS 7.1.1. Video and audio is froze on my end, only video freezes on the other end. It doesn't make a difference who makes the call either.

No, there isn't any setting that you are missing. Have you tried force closing FaceTime, and resetting your iPad?
In order to close FaceTime, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not make a difference, you could try resetting all settings, if you reset all settings you will have to enter all of the device preferences again in the settings app. That takes some time to accomplish, but you will not lose my data, media, apps or anything like that. Settings>General>Reset>Reset all settings.
If that doesn't help, the next step would be to restore the iOS software. Backup your iPad first, restore the iOS, then restore the backup.
Use iTunes to restore your iOS device to factory settings

HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?

Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error.

I have an ipad3(wifi cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

IPOD freezes while SYNCING - and then gets file error

Hello all,
i have a standard 40gb click wheel ipod, quite old, it works, but limited. The ipod just freezes while syncing now, it has been restored numerous times, but 2 not much avail, i can get one or two albums on there, then everytime i try and sync the ipod just freezes, and has to be reset. Every TIme i plug the ipod into my vista laptop it says, the says. SCAN AND FIX, ( because i couldnt get anything else to work i tried this ) and this is what vista told me
http://img155.imageshack.us/img155/9118/vistafixesipodlu5.png
i was like woah, so i proceded to restore the ipod then it seemed to work, for a day. then went back to the freezing while syncing, then next time i plugged in the ipod, windows said the disk needs to be formated before it could be used, so i tried that ( cos itunes was doing sweet **** ALL ) and windows couldnt format it, and neither cos HP USB FORMAT Tool. so i reset the ipod, plug it back into vista, and behold, SCAN AND FIX COMES UP, so i click it, it fixes it, but only loads 1 album before it freezes while syncing again, i have the screenshots,it took 11 screenshots, to get the FULL MESSAGE, that vista chkdsk gave me, there was thousands of these "BAD LINKS IN LOST CHAIN at CLUSTER XXXXX Corrected" messages
im currently listening to Three Days Grace on the ipod, works GREAT, except if i try and put more then this ONE album on it, it freezes while syncing, and gives me the unknown file error. SO any ideas if this ipod can be fixed, cos itunes cant do anything, im assuming there is physical unrepairable damage to the HDD of the ipod and will need replacing if this ipod wants to be in full working order again.
The ipod is NOT under warranty either, so does any1 know where in Australia, it be fitted with a new HDD? Thanks
kind Regards,
Hayden
Message was edited by: FittyyeN

your an idiot stardock, format doesnt work, fails to format -
stardockofthedead ( aussie css joke lol )

HT1766 I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please a

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
I read all the previous replies and same issue.
I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store. 2 weeks later, simposons halloween update (650mb)...at home, using wifi.
Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
Went over my 6GB plan and paid the fees.
This has never happened before...It must come to apples attention by now...

MSI P35 Neo-F (MS-7360): Computer randomly freezes while playing games

Hi there,
I have reached the end of my technical knowledge right now and I'm not even sure if this area of the forum is appropriate. The problem:
While playing higher-end games like Crysis 2, Anno 1404, Mass Effect 2 etc. my computer randomly freezes and the last few milliseconds of sound are being looped on my speakers (kind of like a buzzing sound).
By "freezing" I mean that my computer becomes unresponsive to any action other than pressing the Reset-Button or holding down the Power-Up-Button (no reaction to Ctrl+Alt+Del, Alt+F4, Alt+Tab, no mouse movement... you get it).
There's no exact timing as to when these freezes occur. The fastest freeze happened after less than a minute of playing a game, slowes one (just today after switching to my newer case with better cooling) took about 2 hours.
This freeze only occurs while my System is under load. No freezes while browsing the web, using office programs, listening to music or watching videos.
System Specs:
Mainboard: MSI P35 Neo-F (MSI-7360)
CPU: Intel Core2Quad Q6600 @2.4GHz
RAM: 4x 1GB DDR2-800 Corsair XMS2
Graphics: Gainward GeForce GTX 560 Ti, 1GB GDDR5 VRAM
PSU: Antec High Current Gamer 620W (upgraded from Xilence XP600, 600W)
New CPU Cooler: Arctic Freezer 13 Pro (upgraded from OEM Intel Boxed Cooler)
New Case: Zalman Z9 Plus w/ 4x 120 mm Fans (Upgraded from a Case with only 1x 250mm side Fan)
2 Western Digital HDD (1x 2TB, 1x320 GB)
1 DVD Reader/Burner (unimportant for that error I guess)
OS: Windows 7 Ultimate 64-Bit
2 Screens: 1x 24" Asus VS248H and 1x 21" LG Flatron Wide W2240T
Since this error is bugging me for quite a while now and since this is not the first forum I'm trying to get help from, here's a list of steps i already took to get rid of it, obviously to no good use:
reinstalled games where the freeze occurred
updated all Drivers (including cleaning old versions in safe mode; also tried older drivers)
updated BIOS to v1.A0
Reinstalled Windows
bought new Case and CPU Cooler to improve Air Flow/Cooling
checked Seating of all components (took out, cleaned, reapplied thermal grease where neccessary, re-inserted)
cleaned old case of dust (obviously no problem in the new case, which is 2 days "old")
ran 7 sequences of Memtes86+ without any errors
ran Prime95 without any errors for about 45 Minutes
ran Furmark for 15 Minutes under full load (burn-in test) without any problems, even though my graphics card hit the 100°C frequency-cut level
ran Furmark and Prime95 simultaneously without any problems
took records of component temperatures and system voltages without noticing anything unusual (at least not after i switched to the newer PSU, which is about 1 Month old - yet didn't resolve the problem)
tested with cyclic removal of 1 RAM device to further rule out RAM malfunction
tested with only 2 RAM devices in dual channel mode (Slots 1 and 3)
tried to reduce RAM clock (800 MHz --> 667 MHz) to no avail
checked S.M.A.R.T. values of HDDs, no issues reported
tested without any background programs
raised/lowered voltages to RAM, CPU and Chipset in BIOS to increase logic circuit stability/decrease heat production
I need to mention: After I transferred my system to the new case, i was able to play longer than average compared to my old case. So I am guessing that improper cooling was part of the problem, yet improving cooling obviously didn't resolve it.
Since these freezes are really annoying and nobody could help me resolve this so far, I'm hoping to find some new ways of narrowing down the problem or even getting rid of it here.
Regards
Sebb

Quote from: Bernhard on 10-July-12, 13:15:30
Lets be realistic. A system with a 560TI is recommended to have a around 31Amps under full load, a CX500 would be sufficient.
Have you monitored your CPU and memory utilisation ?
As suggested before, test the GPU in another computer to see if the behaviour is the same.
Whew, I thought for a second there that my common sense had left me when I saw that 60-Amp-Post ^^
Yes, I monitored CPU and RAM usage, there is no recognizeable pattern to be seen and it almost never happens under full load.
I will see if a friend of mine can test my GPU on his computer, and I will test it underclocked right away.
Though one more question regarding that: Should I only underclock GPU Core Clock or both Core and RAM clock?

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Toshiba Satellite C655 SP4168M freezes while playing a game

So i've been having problems with mi laptop very recently with a game i'm playing (League of legends), the game normally works perfectly, but at random times it just completely freezes (making an awkward sttutering sound) and i have to forcefully shutdown and restart the PC. It doesnt happen ALL the time, but when it happens it's really annoying, and i can either happen once every week, or several times daily. I already repaired the video driver but that didnt help, i was thinking about updating the BIOS; but cant find the correct version for my laptop, and i cant even be sure that's actually the problem. Any help would be greatly appreciated.

try using a program like "Piriform Speccy" (free version), and monitor the CPU temps as you are using the system. If it gets up into the orange and red while watching videos, you may need to apply fresh thermal paste to the CPU.
My old L355 is starting to freeze while watching youtube videos the other day, and just confirmed that the CPU is overheating. Will be tearing it apart hopefully tonight to be cleaned up and have a fresh application of arctic silver on the CPU.

Getting error while taking MAX DB trans log backup.

Hi,
I am getting error while taking trans log backup of Maxdb database for archived log through data protector as below,
[Critical] From: OB2BAR_SAPDBBAR@ttcmaxdb "MAX" Time: 08/19/10 02:10:41
Unable to back up archive logs: no autolog medium found in media list
But i am able to take complete data and incremental backup through data protector.
I have already enabled the autolog for MAX DB database and it is writing that log file directly to HP-UX file system. Now i want to take backup of this archived log backup through data protector i.e. through trans log backup. So that the archived log which is on the file system after trans log backup completed will delete the archived logs in filesystem. So that i don;t have to manually delete the archived logs from file system.
Thanks,
Subba

Hi Lars,
Thanks for the reply...
Now i am able to take archive log backup but the problem is i can take only one archive file backup. Not multiple arhive log files generated by autolog at filesystem i.e /sapdb/MAX/saparch.
I have enabled autolog and it is putting auto log file at unix directory i.e. /sapdb/MAX/saparch
And then i am using the DataProtector 6.11 with trans log backup to backup the archived files in /sapdb/MAX/saparch. When i start the trans backup session through data protector it uses the archive stage command as "archive_stage BACKDP-Archive LOGBackup NOVERIFY REMOVE" If /sapdb/MAX/saparch has only one archive file it will backup and remove the file successfully. But if /sapdb/MAX/saparch has multiple archive files it gives an error as below,
Preparing backup.
            Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
            Setting environment variable 'BI_REQUEST' to value 'OLD'.
            Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
            Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
bsi_in -c'.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
            Writing '/sapdb/data/wrk/MAX/dbm.ebf' to the input file.
            Writing '/sapdb/data/wrk/MAX/dbm.knl' to the input file.
        Prepare passed successfully.
        Starting Backint for MaxDB.
            Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
bsi_in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
            Process was started successfully.
        Backint for MaxDB has been started successfully.
        Waiting for the end of Backint for MaxDB.
            2010-09-06 03:15:21 The backup tool is running.
            2010-09-06 03:15:24 The backup tool process has finished work with return code 0.
        Ended the waiting.
        Checking output of Backint for MaxDB.
        Have found all BID's as expected.
    Have saved the Backup History files successfully.
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.ebf
            #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.knl
End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
        Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
        Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
        Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
        Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
    Have finished clean up successfully.
The backup of stage file '/export/sapdb/arch/MAX_LOG.040' was successful.
2010-09-06 03:15:24
Backing up stage file '/export/sapdb/arch/MAX_LOG.041'.
    Creating pipes for data transfer.
        Creating pipe '/var/opt/omni/tmp/MAX.BACKDP-Archive.1' ... Done.
    All data transfer pipes have been created.
    Preparing backup tool.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'OLD'.
        Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
        Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
in -c'.
        Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
        Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
        Writing '/var/opt/omni/tmp/MAX.BACKDP-Archive.1 #PIPE' to the input file.
    Prepare passed successfully.
    Constructed pipe2file call 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait'.
    Starting pipe2file for stage file '/export/sapdb/arch/MAX_LOG.041'.
        Starting pipe2file process 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait >>/var/tmp/tem
p1283767880-0 2>>/var/tmp/temp1283767880-1'.
        Process was started successfully.
    Pipe2file has been started successfully.
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    Waiting for end of the backup operation.
        2010-09-06 03:15:25 The backup tool process has finished work with return code 2.
        2010-09-06 03:15:25 The backup tool is not running.
        2010-09-06 03:15:25 Pipe2file is running.
        2010-09-06 03:15:25 Pipe2file is running.
        2010-09-06 03:15:30 Pipe2file is running.
        2010-09-06 03:15:40 Pipe2file is running.
        2010-09-06 03:15:55 Pipe2file is running.
        2010-09-06 03:16:15 Pipe2file is running.
        Killing not reacting pipe2file process.
        Pipe2file killed successfully.
        2010-09-06 03:16:26 The pipe2file process has finished work with return code -1.
    The backup operation has ended.
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
    Reply buffer filled.
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
        Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
        Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
        Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
        Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
        Copying pipe2file output to this file.
Begin of pipe2file output (/var/tmp/temp1283767880-0)----
End of pipe2file output (/var/tmp/temp1283767880-0)----
        Removed pipe2file output '/var/tmp/temp1283767880-0'.
        Copying pipe2file error output to this file.
Begin of pipe2file error output (/var/tmp/temp1283767880-1)----
End of pipe2file error output (/var/tmp/temp1283767880-1)----
        Removed pipe2file error output '/var/tmp/temp1283767880-1'.
    Have finished clean up successfully.
The backup of stage file '/export/sapdb/arch/MAX_LOG.041' was unsuccessful.
2010-09-06 03:16:26
Cleaning up.
    Have encountered error -24919:
        Can not remove file '/var/tmp/temp1283767880-0'.
        (System error 2; No such file or directory)
    Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-0' ).
    Have encountered error -24919:
        Can not remove file '/var/tmp/temp1283767880-1'.
        (System error 2; No such file or directory)
    Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-1' ).
Have finished clean up successfully.
Thanks,
Subba

New MacBook Pro (Snow Leopard 10.6) Freezes while playing Portal, WOW, etc,

I have the new macbook pro that came out February 2011 with Mac OS-X 10.6, and I have encountered multiple problems with the computer running sluggish and freezing up in some applications. For example while playing Portal, the computer will get extremely hot and everything will freeze while the fan slows down, then it will come back, and about 5 minutes later it does it again. Same thing happens with WOW and I'm sure with many other applications. Even will run slow while watching tv on Netflix. It's ridiculous and unacceptable. Is there a news release with a factory defect or an update available to fix this overheating problem? Thanks

Is there a news release with a factory defect
Not that I am aware of. Check Google or call Apple Care as you are still under warranty.
or an update available to fix this overheating problem?
User Tip: How to deal with MacBook Pro and MacBook heat?
Per your user manual: Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings.
From MacBook Pro: Care, Use, and Safety Information
For prolonged use, place your MacBook Pro on a flat, stable surface. Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.
with Mac OS-X 10.6
Use Software Update to update your os to 10.6.7 or you can go to Apple's download website to install the combo update. Also, update everything that is listed in Software Update that pertains to your computer.
Check WOW's website for updates or contact their customer service department and forums.

Arch get freeze while wifi on

Similar Messages

Maybe you are looking for