Arch Linux KDE 4.5 Memory Usage ~ 1.2 GB

Hello everyone,
everytime I install a new version of KDE the memory usage increases dramatically. Right now, the free command show around 1 GB of memory usage after startup. Since alot of people write here and in other forums that KDE uses much less memory, I got quite curios about KDE.
I still can remember on the first stable version (4.2), where KDE required around 350 Megs on the same machine...
Anyone got an idea?
Thanx

My free -m with kde4.5
[user@dell ~]$ free -m
total used free shared buffers cached
Mem: 3927 2141 1785 0 100 1077
-/+ buffers/cache: 963 2963
Swap: 1536 0 1536
I had: blueman, ktorrent, firefox, desktop efects & daisy, ram, cpu plasmoids running and folowing daemons: syslog-ng hal @sensors @bluetooth @alsa @cpufreq  @cpudyn @networkmanager @kdm @cdemud @cups
Ram is intended to be used and you have enough ram (as me).
You can't have heavy/candy/user frendly desktop like kde/gnome and few ram used.
If your sistem is responsive all is ok.
If you want more free RAM/CPU, disable strigi and nepomuk services from systemsettings/desktop search.
Last edited by mits (2010-08-31 16:59:31)

Similar Messages

  • How to get less memory usage and cpu usage in an old pc with arch?

    hi, i installed archlinux sucessfully after some problems.
    but the system use a lot of memory (free said me 184mb) only with irssi, finch, mp3blaster and midori opened and is "slower" than when i used slitaz linux in it, why?
    well, the things that i installed in arch are:
    xorg + xf86-video-intel
    jwm
    irssi, finch, mp3blaster, htop.
    midori, opera, elinks, links-g, epiphany.
    geany, leafpad, go-openoffice, djview4, gnumeric, epdfview
    isomaster, inkscape, gpicview, cdrkit, mtpaint.
    pcmanfm, emelfm2, hal.
    octave, mathematica5, R, wxmaxima,gnuplot.
    nrg2iso, lxsplit, dclock.
    here is a screenshot:
    the pc have this skills:
    800mhz celeron 370
    MB gygabite gaw-mm7
    192mb ram pc100
    30 GB HD ide 5400 rpm
    some code now:
    lshw -businfo
    WARNING: you should run this program as super-user.
    Bus info Device Class Description
    =================================================
    system Computer
    bus Motherboard
    memory 183MiB System memory
    cpu@0 processor Celeron (Coppermine)
    memory 32KiB L1 cache
    memory 128KiB L2 cache
    pci@0000:00:00.0 bridge 82810 GMCH (Graphics Memory Controller Hub)
    pci@0000:00:01.0 display 82810 (CGC) Chipset Graphics Controller
    pci@0000:00:1e.0 bridge 82801AA PCI Bridge
    pci@0000:01:03.0 eth0 network IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
    pci@0000:00:1f.0 bridge 82801AA ISA Bridge (LPC)
    pci@0000:00:1f.1 storage 82801AA IDE Controller
    pci@0000:00:1f.2 bus 82801AA USB Controller
    pci@0000:00:1f.3 bus 82801AA SMBus Controller
    pci@0000:00:1f.5 multimedia 82801AA AC'97 Audio Controller
    lspci -v
    00:00.0 Host bridge: Intel Corporation 82810 GMCH (Graphics Memory Controller Hub) (rev 03)
    Subsystem: Intel Corporation 82810 GMCH (Graphics Memory Controller Hub)
    Flags: bus master, fast devsel, latency 0
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp
    00:01.0 VGA compatible controller: Intel Corporation 82810 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller])
    Subsystem: Giga-byte Technology Device 0200
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
    Memory at e0000000 (32-bit, prefetchable) [size=64M]
    Memory at ee000000 (32-bit, non-prefetchable) [size=512K]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: e7e00000-ebefffff
    Prefetchable memory behind bridge: dfc00000-dfcfffff
    Kernel modules: shpchp
    00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
    Flags: bus master, medium devsel, latency 0
    Kernel modules: iTCO_wdt, intel-rng
    00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])
    Subsystem: Intel Corporation 82801AA IDE Controller
    Flags: bus master, medium devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    I/O ports at ff00 [size=16]
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix, piix
    00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation 82801AA USB Controller
    Flags: bus master, medium devsel, latency 0, IRQ 9
    I/O ports at da00 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
    Subsystem: Intel Corporation 82801AA SMBus Controller
    Flags: medium devsel, IRQ 10
    I/O ports at 04c0 [size=16]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801
    00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
    Subsystem: Giga-byte Technology Device 2000
    Flags: bus master, medium devsel, latency 0, IRQ 10
    I/O ports at de00 [size=256]
    I/O ports at dc00 [size=64]
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0
    01:03.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
    Subsystem: Sundance Technology Inc / IC Plus Corp Device 0201
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at cc00 [size=128]
    Memory at e8000000 (32-bit, non-prefetchable) [size=512]
    Expansion ROM at dfc00000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: sundance
    Kernel modules: sundance
    lsmod
    snd_ac97_codec 85937 1 snd_intel8x0
    snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 33693 0
    ac97_bus 750 1 snd_ac97_codec
    snd_mixer_oss 14810 1 snd_pcm_oss
    snd_pcm 57479 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 16117 2 snd_seq,snd_pcm
    sundance 15991 0
    uhci_hcd 19124 0
    snd 43847 9 snd_seq_oss,snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    mii 3218 1 sundance
    ppdev 4882 0
    i2c_i801 7122 0
    soundcore 5007 1 snd
    iTCO_wdt 7577 0
    ehci_hcd 31594 0
    lp 6616 0
    sr_mod 13161 0
    analog 7939 0
    psmouse 56309 0
    ns558 1931 0
    parport_pc 27680 1
    shpchp 26592 0
    intel_agp 23225 1
    button 3638 0
    thermal 9326 0
    processor 26494 1
    snd_page_alloc 5809 2 snd_intel8x0,snd_pcm
    iTCO_vendor_support 1453 1 iTCO_wdt
    gameport 7130 3 analog,ns558
    parport 26575 3 ppdev,lp,parport_pc
    pcspkr 1347 0
    usbcore 118921 3 uhci_hcd,ehci_hcd
    serio_raw 3620 0
    evdev 6970 8
    i2c_core 15369 1 i2c_i801
    cdrom 31625 1 sr_mod
    pci_hotplug 23492 1 shpchp
    agpgart 23331 2 intel_agp
    sg 21079 0
    rtc_cmos 7504 0
    rtc_core 12011 1 rtc_cmos
    rtc_lib 1450 1 rtc_core
    ext2 56463 1
    mbcache 4278 1 ext2
    sd_mod 24101 3
    pata_acpi 2264 0
    ata_generic 2235 0
    ata_piix 17725 2
    libata 135579 3 pata_acpi,ata_generic,ata_piix
    floppy 47412 0
    scsi_mod 78933 4 sr_mod,sg,sd_mod,libata
    i've read i can disable the kernel modules that i don't need to improve the memory usage.
    which modules i can disable without "kill my system"?. i don't want SATA, DVD, bluray, infrared, floppys, bluetooth, usb3.0, 3d video card, dial-up-integrated modem, ntfs, 'cause mi old is so old. i want it only for the university.
    thanks in advantage for the tips, and sorry if someone can't understand very well that i wanna tell you, english isn't my "mother languaje".

    thanks for the answers. yes, i have a 1 gb of swap.
    i think i can reduce the memory usage of the system if i dissable the kernel modules that i don't use. but, the question is: what modules is safe to disable to get it?
    thanks in advantage

  • Analysing SAP Java Memory Usage in Unix/Linux

    Hi,
    I need to analyze the SAP Java memory usage of Unix /Linux machine..NW 7.0
    Please guide with the commands and steps..complete prcedure.
    Based on it I should decide whether to create a new server node (or) increasing heap size
    Thanks in advance

    Hi,
    Do you have performance problems?
    How many CPU's are in the server?
    Did you check Log Configuration for delays or errors?
    Did you tune any exisiting parameters?
    You can add the nodes only if there is performance problems. You may think of adding one node to start with
    Proper number of server nodes within an instance:
    u2013 #ServerNodes = availableMemory / (JavaHeapPermSpaceStack)
    You can calculate the server nodes based on below formula
    No. of server Node = (RAM you want to assign or available RAM in GB)/2.5 ============> for 64-bit system
    No. of server Node = (RAM you want to assign or available RAM in GB)/1.5 ============> for 32-bit system
    Hence as per above discussion, we should go with 5 server nodes means,
    5 = RAM/2.5 (Assuming you are on 64-bit platform)
    i.e. RAM = 12.5 GB
    2). u2013 Configure JVM heap according to Note 723909 and Note 1008311 - Recommended Settings for NW 7.0 >= SR2 for the AIX JVM (J9)

  • How to monitor memory usage of "Memory-based Snapshot" executable (MRCNSP)  in Linux?

    We have noticed in the past that MRCNSP/Memory-based Snapshot program executable consumes around 3.8 GB of memory on the linux VM. I understand that value change planning  is 32 bit executable so 4 GB is the limit. I want to monitor the memory usage of the executable when the program runs. The program usually runs overnight. I wanted to check with you experts if you have any MRP executable memory usage monitoring script that I could use.
    I found the metalink note OS Environment and Compile Settings for Value Chain and MRP/Supply Chain Planning Applications (Doc ID 1085614.1) which talks about "top -d60 >>$HOME/top.txt". Please share your ideas for monitoring this process.
    We do not use Demand Planning or Demanta or Advanced Supply Chain Planning which are 64 bit application. That is our future direction.
    Environment:
    EBS : R12.1.2 on Linux. The concurrent manager is on 64 bit linux VM, web services on 32 bit VMs.
    DB: Oracle DB 11.2.0.3 on HP UX Itanium 11.31. Single database instance.
    Thanks
    Cherrish Vaidiyan

    RAM on the controller is not the same as the C: drive. With respect to the controller, you can think of it in the same terms as your computer. RAM is volatile memory and your C: drive is non volatile flash memory.
    Depending on the frequency of the temperature excursions above and below your 70C threshold, the service life of the controller and the method you used to append to the file, there could be a number of issues that may creep up over time.
    The first, and the one you brought up is the size of the file over time. Left unchecked this file could grow continuously until the system literally runs out of flash memory space and chokes. Depending on how your are appending data to this file, you could also use more than a trivial slice of processor time to read and write this big file on disk. While I have not personally ever run one of the RT controllers out of "disk space", I can't imagine that any good could come of that.
    One thought is to keep a rolling history of say the last 3 months. Each month, start a new file and append your data to it during the course of the month. Each time a new file is created, delete the data file from something like 3 months ago. This will ensure that you will always have the last 3 months of history on the system, however the monthly deletion of the oldest data file will limit you to say 3 files at whatever size they happen to be. Unless there are hundreds of thousands of transitions above and below your threshold this should keep you in good shape.
    I also eluded to the method you use to write to this file. I would ensure that you are appending data using the actual file functions and not first reading in the file, appending your data as a string then writing the entire file contents back to disk. In addition to causing the highest load on the file system this method also has the largest system RAM requirements.

  • Linux memory usage

    Hey all,
    I have a 1.6 GHz desktop running w/ 128mb of memory and a Core2Dou laptop w/ 1gb of memory.  Both machines are running Archlinux and Fluxbox.  At boot, both machine are using roughly the same amount of memory, around 26-30 mb but as soon as fluxbox is started the desktop is running around 40-50 mb while the laptop is sitting at 130-140 mb.  Those numbers do not include buffer/cache in them.  They both have similar configurations so I'm curious as to why is there such a drastic difference between the memory usage on the systems when Fluxbox is started?
    -Vincent

    What graphics card do you use on your laptop? Any integrated graphics with shared memory by chance? Then you have your answer.

  • Sudden high memory usage, can't find cause

    I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
    total used free shared buffers cached
    Mem: 7971 7826 144 0 1 149
    -/+ buffers/cache: 7674 296
    Swap: 9215 458 8757
    It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory!  Here's the output of 'top -b -n 1':
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
    2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
    3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
    5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
    7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
    8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
    9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
    10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
    11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
    12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
    13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
    14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
    16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
    17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
    18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
    19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
    20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
    21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
    22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
    23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
    24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
    26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
    27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
    28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
    29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
    30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
    31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
    32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
    33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
    35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
    36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
    37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
    38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
    39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
    40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
    44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
    47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
    49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
    61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
    63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
    65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
    68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
    69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
    70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
    71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
    76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
    81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
    93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
    94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
    95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
    96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
    97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
    100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
    104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
    105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
    119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
    130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
    133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
    150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
    152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
    160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
    162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
    189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
    191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
    216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
    220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
    255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
    256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
    267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
    268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
    275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
    276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
    278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
    280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
    293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
    294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
    311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
    314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
    363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
    370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
    462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
    465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
    504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
    507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
    563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
    628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
    796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
    873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
    874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
    1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
    1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
    1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
    1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
    1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
    1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
    1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
    1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
    1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
    1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
    1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
    1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
    2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
    2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
    2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
    2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
    2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
    2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
    2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
    2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
    2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
    2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
    2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
    2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
    2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
    2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
    2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
    2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
    2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
    2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
    2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
    2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
    2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
    2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
    2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
    2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
    2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
    2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
    2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
    2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
    2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
    2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
    2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
    2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
    2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
    2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
    2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
    2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
    2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
    2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
    2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
    2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
    2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
    2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
    2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
    2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
    2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
    2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
    2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
    2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
    3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
    3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
    3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
    3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
    3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
    32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
    I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
    The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
    [2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
    [2013-08-03 13:00] [PACMAN] starting full system upgrade
    [2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
    [2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
    [2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
    [2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
    [2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
    [2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
    [2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
    [2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
    [2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
    [2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
    [2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
    [2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
    [2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
    [2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
    [2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
    [2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
    [2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
    [2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
    [2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
    [2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
    [2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
    [2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
    [2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
    [2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
    [2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
    [2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
    [2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
    [2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
    [2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
    [2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
    [2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
    [2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
    [2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
    [2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
    [2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
    [2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
    [2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
    [2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
    [2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
    [2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
    [2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
    [2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
    [2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
    [2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
    [2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
    [2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
    [2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
    [2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
    [2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
    [2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
    [2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
    [2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
    [2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
    [2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
    [2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
    [2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
    [2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
    [2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
    [2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
    [2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
    [2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
    [2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
    [2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
    [2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
    [2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
    [2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
    [2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
    [2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
    [2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
    [2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
    [2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
    [2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
    [2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
    [2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
    [2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
    [2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
    [2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
    [2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
    [2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
    [2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
    [2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
    [2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
    [2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
    [2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
    [2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
    [2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
    [2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
    [2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
    [2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
    [2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
    [2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
    [2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)

    Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
    Last edited by Chaotechnician (2013-08-08 00:10:43)

  • Updating to KDE 4.7 - memory is leaking

    Hello!
    After update to KDE 4.7 my system got a memory leak.
    Linux cassiopeia 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux
    16:20:34 up 4:57, 2 users, load average: 3.18, 2.01, 1.01
    root # free
    total used free shared buffers cached
    Mem: 4058660 2416460 1642200 0 1316 254536
    -/+ buffers/cache: 2160608 1898052
    Swap: 4198396 0 4198396
    As you can see, after 5 hours of uptime, the memory usage increased from ~400Mb to 2,5GB. 
    After ca. 8 hours system go upon 3GB and begins to swap aggressively. How i can determine which component causes the leak?
    Here is ps aux output:
    http://paste.pocoo.org/show/449911/
    ty in advance.

    you can use ksysguard and look for the library causing the leak. If it's X leaking you will need root privileges to see what leaks what)
    Other handy tools are top/htop , xrestop (in case of a pixmap leak like nvidia/kwin combo loves to do) and pmap (with pmap -d `pidof <program>` )
    Also what's your GPU / driver and what kwin/compositing rendering engine is in your Desktop effects > Advanced (Xrender or openGL)
    Also are you using the QT default rendering engine (native Xrender) or raster or opengl (not the same as kwin's)

  • HP DV6000 randomly freezing with Arch Linux

    Hello,
    Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
    I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
    The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
    After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
    The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
    Some main packages I currently use are:
    - Cinnamon
    - Filezilla
    - Netbeans PHP IDE 8.0
    - Skype
    - Geany
    - 7-Zip FM
    - Adobe Flash Player
    - Chromium (my main browser)
    - Firefox
    - SSH
    - Htop
    - VLC Media Player
    - Terminator
    Any ideas of what could it be?
    Thanks!
    Last edited by SirPereira (2014-05-19 14:52:56)

    Rexilion wrote:
    It seems you do not have any swap. Correct?
    Could you provide the output of dmesg after the occurance?
    Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
    After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
    Got it now:
    The output of dmesg:
    [ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
    [ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
    [ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
    [ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
    [ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
    [ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
    [ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.444399] intel_idle: does not run on family 6 model 23
    [ 0.444441] GHES: HEST is not enabled!
    [ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.444971] Linux agpgart interface v0.103
    [ 0.445012] rtc_cmos 00:03: RTC can wake from S4
    [ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.445322] TCP: cubic registered
    [ 0.445446] NET: Registered protocol family 10
    [ 0.445656] NET: Registered protocol family 17
    [ 0.445905] registered taskstats version 1
    [ 0.446529] Magic number: 14:681:877
    [ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
    [ 0.446705] PM: Hibernation image not present or could not be loaded.
    [ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
    [ 0.447931] Write protecting the kernel read-only data: 8192k
    [ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
    [ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
    [ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
    [ 0.460077] systemd-udevd[47]: starting version 212
    [ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 0.489263] ACPI: bus type USB registered
    [ 0.489293] usbcore: registered new interface driver usbfs
    [ 0.489304] usbcore: registered new interface driver hub
    [ 0.494274] sdhci: Secure Digital Host Controller Interface driver
    [ 0.494278] sdhci: Copyright(c) Pierre Ossman
    [ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
    [ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
    [ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
    [ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
    [ 0.499195] usbcore: registered new device driver usb
    [ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.500201] ehci-pci: EHCI PCI platform driver
    [ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
    [ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
    [ 0.501200] hub 1-0:1.0: USB hub found
    [ 0.501209] hub 1-0:1.0: 2 ports detected
    [ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    [ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
    [ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
    [ 0.503178] SCSI subsystem initialized
    [ 0.503409] hub 2-0:1.0: USB hub found
    [ 0.503419] hub 2-0:1.0: 2 ports detected
    [ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
    [ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
    [ 0.508093] libata version 3.00 loaded.
    [ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.513563] hub 3-0:1.0: USB hub found
    [ 0.513629] hub 3-0:1.0: 4 ports detected
    [ 0.536813] hub 1-0:1.0: USB hub found
    [ 0.536828] hub 1-0:1.0: 2 ports detected
    [ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.560059] hub 2-0:1.0: USB hub found
    [ 0.560067] hub 2-0:1.0: 2 ports detected
    [ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    [ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
    [ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
    [ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.576856] hub 4-0:1.0: USB hub found
    [ 0.576865] hub 4-0:1.0: 8 ports detected
    [ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
    [ 0.577420] hub 5-0:1.0: USB hub found
    [ 0.577429] hub 5-0:1.0: 2 ports detected
    [ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
    [ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
    [ 0.577877] hub 6-0:1.0: USB hub found
    [ 0.577885] hub 6-0:1.0: 2 ports detected
    [ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
    [ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
    [ 0.578323] hub 7-0:1.0: USB hub found
    [ 0.578331] hub 7-0:1.0: 2 ports detected
    [ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
    [ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
    [ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
    [ 0.578778] hub 8-0:1.0: USB hub found
    [ 0.578786] hub 8-0:1.0: 2 ports detected
    [ 0.579138] ahci 0000:00:1f.2: version 3.0
    [ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
    [ 0.597458] scsi0 : ahci
    [ 0.597577] scsi1 : ahci
    [ 0.597688] scsi2 : ahci
    [ 0.597787] scsi3 : ahci
    [ 0.597890] scsi4 : ahci
    [ 0.597988] scsi5 : ahci
    [ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
    [ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
    [ 0.598054] ata3: DUMMY
    [ 0.598056] ata4: DUMMY
    [ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
    [ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
    [ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
    [ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
    [ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.084680] ata1.00: configured for UDMA/100
    [ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
    [ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
    [ 1.092125] ata2.00: configured for UDMA/100
    [ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
    [ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
    [ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.325332] usbcore: registered new interface driver usbhid
    [ 1.325335] usbhid: USB HID core driver
    [ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
    [ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
    [ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
    [ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
    [ 1.418377] sda: sda1 sda2
    [ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
    [ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
    [ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
    [ 2.426729] Switched to clocksource tsc
    [ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
    [ 2.502963] random: nonblocking pool is initialized
    [ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [ 2.721454] systemd[1]: Detected architecture 'x86-64'.
    [ 2.739429] systemd[1]: Set hostname to <arch>.
    [ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
    [ 3.755410] systemd[1]: Starting Login Prompts.
    [ 3.755928] systemd[1]: Reached target Login Prompts.
    [ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.756002] systemd[1]: Starting Remote File Systems.
    [ 3.756478] systemd[1]: Reached target Remote File Systems.
    [ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 3.756839] systemd[1]: Starting Encrypted Volumes.
    [ 3.757313] systemd[1]: Reached target Encrypted Volumes.
    [ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.757373] systemd[1]: Starting Paths.
    [ 3.757845] systemd[1]: Reached target Paths.
    [ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.758432] systemd[1]: Starting Swap.
    [ 3.758902] systemd[1]: Reached target Swap.
    [ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
    [ 3.759249] systemd[1]: Starting Root Slice.
    [ 3.766515] systemd[1]: Created slice Root Slice.
    [ 3.766527] systemd[1]: Starting User and Session Slice.
    [ 3.767173] systemd[1]: Created slice User and Session Slice.
    [ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.769189] systemd[1]: Starting udev Control Socket.
    [ 3.769676] systemd[1]: Listening on udev Control Socket.
    [ 3.769688] systemd[1]: Starting udev Kernel Socket.
    [ 3.770181] systemd[1]: Listening on udev Kernel Socket.
    [ 3.770192] systemd[1]: Starting Journal Socket.
    [ 3.770700] systemd[1]: Listening on Journal Socket.
    [ 3.770716] systemd[1]: Starting System Slice.
    [ 3.771341] systemd[1]: Created slice System Slice.
    [ 3.771357] systemd[1]: Started File System Check on Root Device.
    [ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 3.772011] systemd[1]: Mounting Temporary Directory...
    [ 3.790231] systemd[1]: Starting system-netctl.slice.
    [ 3.790914] systemd[1]: Created slice system-netctl.slice.
    [ 3.790930] systemd[1]: Starting system-getty.slice.
    [ 3.791567] systemd[1]: Created slice system-getty.slice.
    [ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.876658] systemd[1]: Starting Apply Kernel Variables...
    [ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.878150] systemd[1]: Mounting Huge Pages File System...
    [ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.879636] systemd[1]: Starting Setup Virtual Console...
    [ 3.880782] systemd[1]: Started Load Kernel Modules.
    [ 3.880820] systemd[1]: Mounting Configuration File System...
    [ 3.881579] systemd[1]: Mounting Debug File System...
    [ 3.882319] systemd[1]: Mounted FUSE Control File System.
    [ 3.882346] systemd[1]: Starting Journal Service...
    [ 3.883635] systemd[1]: Started Journal Service.
    [ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 4.431925] systemd-udevd[146]: starting version 212
    [ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    [ 5.513433] ACPI: Power Button [PWRB]
    [ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 5.513777] ACPI: Lid Switch [LID0]
    [ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    [ 5.513834] ACPI: Sleep Button [SLPB]
    [ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
    [ 5.513914] ACPI: Power Button [PWRF]
    [ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
    [ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.661096] acpi device:08: registered as cooling_device0
    [ 5.663657] acpi device:0a: registered as cooling_device1
    [ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
    [ 5.708497] hp_accel: laptop model unknown, using default axes configuration
    [ 5.720053] lis3lv02d: 8 bits sensor found
    [ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
    [ 5.791574] ene_ir: PLL freq = 1406
    [ 5.791575] ene_ir: KB3926C detected
    [ 5.791586] ene_ir: Firmware regs: 00 00
    [ 5.791587] ene_ir: Hardware features:
    [ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
    [ 5.821208] Monitor-Mwait will be used to enter C-1 state
    [ 5.821217] Monitor-Mwait will be used to enter C-2 state
    [ 5.821221] Monitor-Mwait will be used to enter C-3 state
    [ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
    [ 5.821242] ACPI: acpi_idle registered with cpuidle
    [ 5.821270] Switched to clocksource hpet
    [ 5.827916] Registered IR keymap rc-rc6-mce
    [ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
    [ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
    [ 5.840895] ene_ir: driver has been successfully loaded
    [ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 5.877265] IR JVC protocol handler initialized
    [ 5.878491] IR NEC protocol handler initialized
    [ 5.879175] IR RC6 protocol handler initialized
    [ 5.880281] IR RC5(x) protocol handler initialized
    [ 5.880739] IR SANYO protocol handler initialized
    [ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
    [ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
    [ 5.881065] IR Sony protocol handler initialized
    [ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
    [ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
    [ 5.882270] IR LIRC bridge handler initialized
    [ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
    [ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
    [ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
    [ 5.903835] wmi: Mapper loaded
    [ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
    [ 6.029419] [drm] Initialized drm 1.1.0 20060810
    [ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
    [ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
    [ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
    [ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
    [ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
    [ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 6.345229] mousedev: PS/2 mouse device common for all mice
    [ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
    [ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.535077] media: Linux media interface: v0.10
    [ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
    [ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
    [ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
    [ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
    [ 6.701985] Linux video capture interface: v2.00
    [ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.922839] Disabling lock debugging due to kernel taint
    [ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
    [ 6.991292] iTCO_vendor_support: vendor-support=0
    [ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    [ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
    [ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
    [ 7.089277] Bluetooth: Core ver 2.18
    [ 7.089304] NET: Registered protocol family 31
    [ 7.089306] Bluetooth: HCI device and connection manager initialized
    [ 7.089316] Bluetooth: HCI socket layer initialized
    [ 7.089319] Bluetooth: L2CAP socket layer initialized
    [ 7.089331] Bluetooth: SCO socket layer initialized
    [ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
    [ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
    [ 7.125560] usbcore: registered new interface driver btusb
    [ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
    [ 7.136523] usbcore: registered new interface driver uvcvideo
    [ 7.136525] USB Video Class driver (1.1.1)
    [ 7.162108] kvm: disabled by bios
    [ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
    [ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
    [ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
    [ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
    [ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
    [ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
    [ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    [ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
    [ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
    [ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
    [ 20.909113] wlp2s0: authenticated
    [ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
    [ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
    [ 20.918955] wlp2s0: associated
    [ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    [ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
    [ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
    [ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
    [ 21.099780] cfg80211: Calling CRDA for country: AT
    [ 21.101974] wlp2s0: authenticated
    [ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
    [ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
    [ 21.115231] wlp2s0: associated
    [ 26.591580] fuse init (API version 7.22)
    [ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
    [ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
    [ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
    [ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
    [ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
    [ 148.514272] wlp2s0: authenticated
    [ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
    [ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
    [ 148.519034] wlp2s0: associated
    [ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
    [ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
    [ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
    [ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
    [ 231.082756] wlp2s0: authenticated
    [ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
    [ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
    [ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
    [ 231.380479] wlp2s0: authenticated
    [ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
    [ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
    [ 231.390072] wlp2s0: associated
    [ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
    [ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    [ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
    [ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
    [ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000]

  • Xorg memory usage.

    Hi there.
    I am new to linux and have just recently performed another clean install of arch linux onto my system. I was just wanting find out why after running my system for about 4 hours my xorg server memory usage increased from about 30MB to 1.5GB? I dont think this is normal behaviour.
    My system is
    Intel Core 2 Quad Q6600
    4GB DDR2 1067Mhz
    Nvidida Gefore 8800GTX
    running
    Archlinux 64-bit
    with xorg-server 1.7.3.902-1
    and KDEmod4
    btw, my system is entirely up to date. If needed I will move my post to the KDEmod forums, but im unsure of the likeliness that kdemod is the cause. Thanks in advance.
    Last edited by slate (2010-01-03 22:59:18)

    Ultraman wrote:
    insanemal wrote:
    There is a known memory leak in the ATI R600 driver.
    It only happens with specific 3D commands.
    https://bugs.freedesktop.org/show_bug.cgi?id=25483
    Dunno about the Nvidia one.
    That would explain mine, I use the xf86-video-ati from the repos and use some compositing effects.
    So do I but even after deactivating compositing the problem still seems to be there.

  • Slow boot up speed-Arch Linux

    Hi everyone,i am facing two important problems in my Arch Linux
    1)Slow boot-up and Shut-down
    2)Poor battery life
    I am using an Dell Inspiron-N5010 laptop with intel-i3 processor and 3 GB RAM and i have updated my Arch system recently and my kernel version is
    Linux 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Linux
    Login Manager=GDM
    Desktop Environment=Cinnamon 2.0.14
    Here is my /etc/mkinitcpio.conf
    MODULES="i915 drm_kms_helper msr intel_agp dell_wmi dell_laptop acpi"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block fsck filesystems keyboard fsck"
    Here is my output of systemd-analyze blame
    5.927s pacman-init.service
    4.811s NetworkManager.service
    4.686s dkms.service
    2.206s systemd-logind.service
    2.126s gdm.service
    1.672s systemd-vconsole-setup.service
    1.327s plymouth-read-write.service
    1.232s plymouth-start.service
    1.104s kmod-static-nodes.service
    1.073s polkit.service
    1.038s systemd-fsck-root.service
    1.012s systemd-udev-trigger.service
    866ms accounts-daemon.service
    813ms systemd-modules-load.service
    785ms systemd-sysctl.service
    785ms sys-kernel-debug.mount
    784ms dev-mqueue.mount
    784ms dev-hugepages.mount
    587ms colord.service
    569ms sys-kernel-config.mount
    504ms systemd-backlight@acpi_video0.service
    496ms systemd-journal-flush.service
    422ms systemd-tmpfiles-setup-dev.service
    402ms tmp.mount
    400ms systemd-tmpfiles-clean.service
    396ms dhcpcd.service
    233ms systemd-random-seed.service
    229ms haveged.service
    217ms etc-pacman.d-gnupg.mount
    182ms wpa_supplicant.service
    181ms systemd-remount-fs.service
    129ms systemd-user-sessions.service
    115ms systemd-udevd.service
    114ms systemd-update-utmp.service
    81ms udisks2.service
    76ms systemd-tmpfiles-setup.service
    71ms dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap
    63ms upower.service
    58ms cpupower.service
    56ms laptop-mode.service
    51ms rtkit-daemon.service
    43ms [email protected]
    10ms alsa-restore.service
    and still its taking more time to get the Display Manager and after entering my login and password its taking more time to get my cinnamon desktop
    I am using Laptop-Mode-Tools ,cpupower(Conservative Governor),Thermald to improve my batterylife but nothing is helping me out its just 45~1 hour in my arch system but its actually 2 to 2.5 hours in my windows 7
    and i was googling for good solutions but nothing is helping me to get out of  the problems and i hope i could fix this issue by means of this forum.

    Neburski wrote:
    Dinesh raja wrote:No its not Manjaro but an custom system which i have built using Arch-Iso
    Ah, anyway identify all the service files for systemd to see if there are some that you don't need. Looks like you already did.
    For the slow boot up and shutdown you could give a closer look at dmesg.
    Check http://freedesktop.org/wiki/Software/sy … eventually to see how you can save your dmesg for the shutdown part. Then look for entries that have a large gap in time (the numbers in [###] are seconds since bootup).
    Can you maybe also define slow. How many seconds / minutes does it take?
    its taking 23.099s for Kernel+User space and the time gap between Display Manager and Cinnamon desktop is approximately 30 sto 40 s
    here is my dmesg complete output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b75a5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b75a6000-0x00000000b75edfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b75ee000-0x00000000b75f8fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b75f9000-0x00000000b75fbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b75fc000-0x00000000b761ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7620000-0x00000000b7620fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7621000-0x00000000b7628fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7629000-0x00000000b762bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b762c000-0x00000000b7630fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7631000-0x00000000b7650fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7651000-0x00000000b7693fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7694000-0x00000000b77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b9e00000-0x00000000bbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Dell Inc. Inspiron N5010/0P2H9M, BIOS A09 10/19/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ffff8800000fcda0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7200000-0xb73fffff]
    [ 0.000000] [mem 0xb7200000-0xb73fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb4000000-0xb71fffff]
    [ 0.000000] [mem 0xb4000000-0xb71fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x80000000-0xb3ffffff]
    [ 0.000000] [mem 0x80000000-0xb3ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0xb7400000-0xb75a5fff]
    [ 0.000000] [mem 0xb7400000-0xb75a5fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7620000-0xb7620fff]
    [ 0.000000] [mem 0xb7620000-0xb7620fff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7694000-0xb77fffff]
    [ 0.000000] [mem 0xb7694000-0xb77fffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37912000-0x37c80fff]
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
    [ 0.000000] ACPI: XSDT 00000000b75ee088 0005C (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000b75f7a50 000F4 (v04 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130725/tbfadt-395)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xB762CF40/0x00000000B762CF80, using 32 (20130725/tbfadt-522)
    [ 0.000000] ACPI: DSDT 00000000b75ee170 098DF (v02 DELL WN09 00005010 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000b762cf40 00040
    [ 0.000000] ACPI: APIC 00000000b75f7b48 00072 (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000b75f7bc0 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 00000000b75f7d10 0003C (v01 DELL WN09 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SLIC 00000000b75f7d50 00176 (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: HPET 00000000b75f7ec8 00038 (v01 DELL WN09 01072009 AMI. 00000003)
    [ 0.000000] ACPI: OSFR 00000000b75f7f00 0008C (v01 DELL M08 07DA0A13 ASL 00000061)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b77fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb77fffff]
    [ 0.000000] NODE_DATA [mem 0xb77fb000-0xb77fffff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b3c00000-ffff8800b69fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xb75a5fff]
    [ 0.000000] node 0: [mem 0xb7620000-0xb7620fff]
    [ 0.000000] node 0: [mem 0xb7694000-0xb77fffff]
    [ 0.000000] On node 0 totalpages: 751279
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11680 pages used for memmap
    [ 0.000000] DMA32 zone: 747283 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75a6000-0xb75edfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75ee000-0xb75f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75f9000-0xb75fbfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75fc000-0xb761ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7621000-0xb7628fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7629000-0xb762bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb762c000-0xb7630fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7631000-0xb7650fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7651000-0xb7693fff]
    [ 0.000000] e820: [mem 0xbc000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800b7000000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 739514
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2942184K/3005116K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 62932K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2260.785 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.96 BogoMIPS (lpj=7535950)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000041] Security Framework initialized
    [ 0.000053] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000055] Yama: becoming mindful.
    [ 0.000408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002121] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002882] Mount-cache hash table entries: 256
    [ 0.003130] Initializing cgroup subsys memory
    [ 0.003144] Initializing cgroup subsys devices
    [ 0.003147] Initializing cgroup subsys freezer
    [ 0.003149] Initializing cgroup subsys net_cls
    [ 0.003151] Initializing cgroup subsys blkio
    [ 0.003177] CPU: Physical Processor ID: 0
    [ 0.003178] CPU: Processor Core ID: 0
    [ 0.003185] mce: CPU supports 9 MCE banks
    [ 0.003198] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003211] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003319] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004634] ACPI: Core revision 20130725
    [ 0.009965] ACPI: All ACPI Tables successfully acquired
    [ 0.019630] ftrace: allocating 20320 entries in 80 pages
    [ 0.032100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.065112] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
    [ 0.171587] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.171595] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.171599] ... version: 3
    [ 0.171600] ... bit width: 48
    [ 0.171601] ... generic registers: 4
    [ 0.171602] ... value mask: 0000ffffffffffff
    [ 0.171604] ... max period: 000000007fffffff
    [ 0.171605] ... fixed-purpose events: 3
    [ 0.171606] ... event mask: 000000070000000f
    [ 0.211654] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.198312] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.251580] Brought up 4 CPUs
    [ 0.251586] smpboot: Total of 4 processors activated (18093.87 BogoMIPS)
    [ 0.254266] devtmpfs: initialized
    [ 0.257030] PM: Registering ACPI NVS region [mem 0xb75a6000-0xb75edfff] (294912 bytes)
    [ 0.257037] PM: Registering ACPI NVS region [mem 0xb75f9000-0xb75fbfff] (12288 bytes)
    [ 0.257039] PM: Registering ACPI NVS region [mem 0xb7621000-0xb7628fff] (32768 bytes)
    [ 0.257040] PM: Registering ACPI NVS region [mem 0xb762c000-0xb7630fff] (20480 bytes)
    [ 0.257042] PM: Registering ACPI NVS region [mem 0xb7651000-0xb7693fff] (274432 bytes)
    [ 0.258060] RTC time: 15:04:06, date: 02/18/14
    [ 0.258105] NET: Registered protocol family 16
    [ 0.258225] cpuidle: using governor ladder
    [ 0.258227] cpuidle: using governor menu
    [ 0.258271] ACPI: bus type PCI registered
    [ 0.258273] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.258334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.258337] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.281454] PCI: Using configuration type 1 for base access
    [ 0.282099] bio: create slab <bio-0> at 0
    [ 0.282221] ACPI: Added _OSI(Module Device)
    [ 0.282223] ACPI: Added _OSI(Processor Device)
    [ 0.282225] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282226] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.283469] ACPI: EC: Look up EC in DSDT
    [ 0.284754] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.289116] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.302665] ACPI: SSDT 00000000b7621c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.303013] ACPI: Dynamic OEM Table Load:
    [ 0.303016] ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.303484] ACPI: Interpreter enabled
    [ 0.303491] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.303495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.303510] ACPI: (supports S0 S3 S4 S5)
    [ 0.303512] ACPI: Using IOAPIC for interrupt routing
    [ 0.303547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.303686] ACPI: No dock devices found.
    [ 0.322094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.322239] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.322442] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
    [ 0.322704] PCI host bridge to bus 0000:00
    [ 0.322708] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.322710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.322712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.322714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.322716] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xffffffff]
    [ 0.322725] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 0.322744] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 0.322818] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 0.322831] pci 0000:00:02.0: reg 0x10: [mem 0xfa400000-0xfa7fffff 64bit]
    [ 0.322838] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.322843] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
    [ 0.322962] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 0.322991] pci 0000:00:16.0: reg 0x10: [mem 0xfbd09000-0xfbd0900f 64bit]
    [ 0.323088] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.323185] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.323212] pci 0000:00:1a.0: reg 0x10: [mem 0xfbd08000-0xfbd083ff]
    [ 0.323324] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.325807] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.325857] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.325880] pci 0000:00:1b.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
    [ 0.325979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.326066] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.326169] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.326222] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.326261] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.326362] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.326415] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.326453] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
    [ 0.326553] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.326608] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.326649] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.326750] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.326803] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.326851] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.326878] pci 0000:00:1d.0: reg 0x10: [mem 0xfbd07000-0xfbd073ff]
    [ 0.326988] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.329810] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.329853] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.329965] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.330003] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
    [ 0.330187] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.330216] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.330227] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.330238] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.330249] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.330261] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.330272] pci 0000:00:1f.2: reg 0x24: [mem 0xfbd06000-0xfbd067ff]
    [ 0.330340] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.330421] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.330443] pci 0000:00:1f.3: reg 0x10: [mem 0xfbd05000-0xfbd050ff 64bit]
    [ 0.330474] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.330575] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 0.330604] pci 0000:00:1f.6: reg 0x10: [mem 0xfbd04000-0xfbd04fff 64bit]
    [ 0.330829] pci 0000:00:1c.0: PCI bridge to [bus 11]
    [ 0.330946] pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000
    [ 0.330979] pci 0000:12:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
    [ 0.331144] pci 0000:12:00.0: supports D1 D2
    [ 0.331146] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
    [ 0.338279] pci 0000:00:1c.1: PCI bridge to [bus 12]
    [ 0.338291] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.338460] pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.338526] pci 0000:13:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.338640] pci 0000:13:00.0: reg 0x18: [mem 0xd0b10000-0xd0b10fff 64bit pref]
    [ 0.338706] pci 0000:13:00.0: reg 0x20: [mem 0xd0b00000-0xd0b0ffff 64bit pref]
    [ 0.338752] pci 0000:13:00.0: reg 0x30: [mem 0xfb200000-0xfb21ffff pref]
    [ 0.338976] pci 0000:13:00.0: supports D1 D2
    [ 0.338978] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.339173] pci 0000:00:1c.2: PCI bridge to [bus 13]
    [ 0.339178] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.339183] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
    [ 0.339190] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.339268] pci 0000:00:1c.4: PCI bridge to [bus 15]
    [ 0.339274] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.339278] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
    [ 0.339286] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.339371] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
    [ 0.339385] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.339387] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.339389] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.339391] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xffffffff] (subtractive decode)
    [ 0.339814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.339874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.339932] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.339990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.340047] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.340106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.340164] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.340222] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.340440] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.340472] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.340534] Found 1 acpi root devices
    [ 0.340641] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.340644] vgaarb: loaded
    [ 0.340645] vgaarb: bridge control possible 0000:00:02.0
    [ 0.340690] PCI: Using ACPI for IRQ routing
    [ 0.350522] PCI: Discovered peer bus ff
    [ 0.350524] PCI: root bus ff: using default resources
    [ 0.350525] PCI: Probing PCI hardware (bus ff)
    [ 0.350548] PCI host bridge to bus 0000:ff
    [ 0.350551] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
    [ 0.350553] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.350555] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
    [ 0.350561] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
    [ 0.350602] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
    [ 0.350643] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
    [ 0.350680] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
    [ 0.350718] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
    [ 0.350756] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
    [ 0.350804] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
    [ 0.350807] PCI: pci_cache_line_size set to 64 bytes
    [ 0.350880] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
    [ 0.350882] e820: reserve RAM buffer [mem 0xb75a6000-0xb7ffffff]
    [ 0.350884] e820: reserve RAM buffer [mem 0xb7621000-0xb7ffffff]
    [ 0.350886] e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff]
    [ 0.350986] NetLabel: Initializing
    [ 0.350988] NetLabel: domain hash size = 128
    [ 0.350989] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.351002] NetLabel: unlabeled traffic allowed by default
    [ 0.351040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.351046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.353079] Switched to clocksource hpet
    [ 0.357893] pnp: PnP ACPI init
    [ 0.357912] ACPI: bus type PNP registered
    [ 0.358057] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.358060] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.358062] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.358064] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.358066] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.358070] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.358105] pnp 00:01: [dma 4]
    [ 0.358125] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.358162] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.358187] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.358217] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.358267] system 00:05: [io 0x04d0-0x04d1] has been reserved
    [ 0.358270] system 00:05: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 0.358273] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358309] pnp 00:06: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
    [ 0.358347] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.358508] system 00:08: [io 0x0400-0x047f] could not be reserved
    [ 0.358511] system 00:08: [io 0x1180-0x119f] has been reserved
    [ 0.358513] system 00:08: [io 0x0500-0x057f] has been reserved
    [ 0.358516] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.358518] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.358520] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.358523] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.358526] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.358636] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.358854] pnp: PnP ACPI: found 10 devices
    [ 0.358856] ACPI: bus type PNP unregistered
    [ 0.365989] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000
    [ 0.365994] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000
    [ 0.365996] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000
    [ 0.366007] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000
    [ 0.366010] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000
    [ 0.366040] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.366042] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.366044] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.366047] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.366049] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.366053] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
    [ 0.366056] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366059] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366061] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.366064] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.366066] pci 0000:00:1c.0: PCI bridge to [bus 11]
    [ 0.366071] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.366077] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc1fffff]
    [ 0.366082] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366089] pci 0000:00:1c.1: PCI bridge to [bus 12]
    [ 0.366093] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.366100] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.366104] pci 0000:00:1c.1: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366112] pci 0000:00:1c.2: PCI bridge to [bus 13]
    [ 0.366116] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.366122] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
    [ 0.366127] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.366135] pci 0000:00:1c.4: PCI bridge to [bus 15]
    [ 0.366139] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.366145] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
    [ 0.366150] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.366157] pci 0000:00:1e.0: PCI bridge to [bus 20]
    [ 0.366172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.366174] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.366176] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.366178] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xffffffff]
    [ 0.366180] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
    [ 0.366182] pci_bus 0000:11: resource 1 [mem 0xbc000000-0xbc1fffff]
    [ 0.366184] pci_bus 0000:11: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366186] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
    [ 0.366188] pci_bus 0000:12: resource 1 [mem 0xfbc00000-0xfbcfffff]
    [ 0.366190] pci_bus 0000:12: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366192] pci_bus 0000:13: resource 0 [io 0xe000-0xefff]
    [ 0.366194] pci_bus 0000:13: resource 1 [mem 0xfb200000-0xfbbfffff]
    [ 0.366196] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.366198] pci_bus 0000:15: resource 0 [io 0xd000-0xdfff]
    [ 0.366200] pci_bus 0000:15: resource 1 [mem 0xfa800000-0xfb1fffff]
    [ 0.366202] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.366204] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
    [ 0.366206] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
    [ 0.366207] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.366209] pci_bus 0000:20: resource 7 [mem 0xbc000000-0xffffffff]
    [ 0.366212] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
    [ 0.366214] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.366254] NET: Registered protocol family 2
    [ 0.366468] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.366709] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.366902] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.366941] TCP: reno registered
    [ 0.366949] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.366986] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.367076] NET: Registered protocol family 1
    [ 0.367090] pci 0000:00:02.0: Boot video device
    [ 0.613312] PCI: CLS 64 bytes, default 64
    [ 0.613356] Unpacking initramfs...
    [ 0.685162] Freeing initrd memory: 3516K (ffff880037912000 - ffff880037c81000)
    [ 0.685427] Scanning for low memory corruption every 60 seconds
    [ 0.685724] audit: initializing netlink socket (disabled)
    [ 0.685739] type=2000 audit(1392735846.573:1): initialized
    [ 0.697728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.698983] zbud: loaded
    [ 0.699170] VFS: Disk quotas dquot_6.5.2
    [ 0.699211] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.699398] msgmni has been set to 5753
    [ 0.699768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.699834] io scheduler noop registered
    [ 0.699836] io scheduler deadline registered
    [ 0.699865] io scheduler cfq registered (default)
    [ 0.700108] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.700288] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.700460] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.700630] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.700717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.700804] pciehp: Using ACPI for slot detection.
    [ 0.700872] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
    [ 0.700927] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
    [ 0.700934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.700978] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.700980] vesafb: scrolling: redraw
    [ 0.700982] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.701276] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
    [ 0.827851] Console: switching to colour frame buffer device 128x48
    [ 0.954320] fb0: VESA VGA frame buffer device
    [ 0.954333] intel_idle: MWAIT substates: 0x1120
    [ 0.954334] intel_idle: v0.4 model 0x25
    [ 0.954336] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.954490] GHES: HEST is not enabled!
    [ 0.954559] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.955036] Linux agpgart interface v0.103
    [ 0.955109] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
    [ 0.983471] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.983499] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.983628] mousedev: PS/2 mouse device common for all mice
    [ 0.984635] rtc_cmos 00:02: RTC can wake from S4
    [ 0.984795] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.984828] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    [ 0.984891] drop_monitor: Initializing network drop monitor service
    [ 0.984966] TCP: cubic registered
    [ 0.985061] NET: Registered protocol family 10
    [ 0.985242] NET: Registered protocol family 17
    [ 0.985251] Key type dns_resolver registered
    [ 0.985582] registered taskstats version 1
    [ 0.986258] Magic number: 2:431:83
    [ 0.986415] rtc_cmos 00:02: setting system clock to 2014-02-18 15:04:07 UTC (1392735847)
    [ 0.986464] PM: Checking hibernation image partition /dev/sda6
    [ 1.020768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.032423] PM: Hibernation image not present or could not be loaded.
    [ 1.033852] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 1.033855] Write protecting the kernel read-only data: 8192k
    [ 1.036680] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
    [ 1.037857] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 1.048632] systemd-udevd[58]: starting version 208
    [ 1.051934] [drm] Initialized drm 1.1.0 20060810
    [ 1.052681] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 1.052752] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.053489] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 1.053683] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 1.054243] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.054250] ACPI: Power Button [PWRB]
    [ 1.054309] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 1.056341] ACPI: Lid Switch [LID0]
    [ 1.056390] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 1.056394] ACPI: Sleep Button [SBTN]
    [ 1.056449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 1.056453] ACPI: Power Button [PWRF]
    [ 1.061806] [drm] Memory usable by graphics device = 2048M
    [ 1.061813] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [ 1.061816] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 1.061836] Console: switching to colour dummy device 80x25
    [ 1.061989] i915 0000:00:02.0: setting latency timer to 64
    [ 1.088158] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.088167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.088168] [drm] Driver supports precise vblank timestamp query.
    [ 1.088247] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.125908] fbcon: inteldrmfb (fb0) is primary device
    [ 1.686801] tsc: Refined TSC clocksource calibration: 2261.000 MHz
    [ 2.030270] Console: switching to colour frame buffer device 170x48
    [ 2.033661] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.033664] i915 0000:00:02.0: registered panic notifier
    [ 2.043083] acpi device:2e: registered as cooling_device0
    [ 2.043220] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.043321] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input6
    [ 2.043365] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.072732] ACPI: bus type USB registered
    [ 2.072789] usbcore: registered new interface driver usbfs
    [ 2.072800] usbcore: registered new interface driver hub
    [ 2.072970] usbcore: registered new device driver usb
    [ 2.073041] SCSI subsystem initialized
    [ 2.075058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.075393] ehci-pci: EHCI PCI platform driver
    [ 2.075595] libata version 3.00 loaded.
    [ 2.075607] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.075628] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.075664] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.075687] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.079676] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.079703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbd08000
    [ 2.086921] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.087210] hub 1-0:1.0: USB hub found
    [ 2.087224] hub 1-0:1.0: 2 ports detected
    [ 2.087609] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.087620] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.087628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.087646] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.091655] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.091677] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbd07000
    [ 2.100198] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.100402] hub 2-0:1.0: USB hub found
    [ 2.100413] hub 2-0:1.0: 2 ports detected
    [ 2.100556] ahci 0000:00:1f.2: version 3.0
    [ 2.100724] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 2.100819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
    [ 2.100823] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
    [ 2.100828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.114500] scsi0 : ahci
    [ 2.114680] scsi1 : ahci
    [ 2.114837] scsi2 : ahci
    [ 2.114999] scsi3 : ahci
    [ 2.115160] scsi4 : ahci
    [ 2.115327] scsi5 : ahci
    [ 2.115387] ata1: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06100 irq 45
    [ 2.115391] ata2: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06180 irq 45
    [ 2.115393] ata3: DUMMY
    [ 2.115394] ata4: DUMMY
    [ 2.115398] ata5: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06300 irq 45
    [ 2.115399] ata6: DUMMY
    [ 2.393678] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.433682] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.433781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.433831] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.434884] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133
    [ 2.434889] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.436127] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD12, max UDMA/100
    [ 2.436147] ata1.00: configured for UDMA/133
    [ 2.436450] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
    [ 2.437560] ata2.00: configured for UDMA/100
    [ 2.443701] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD12 PQ: 0 ANSI: 5
    [ 2.447926] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.447932] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.448029] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.448032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.448096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.455780] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
    [ 2.455783] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.455953] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.517726] hub 1-1:1.0: USB hub found
    [ 2.517904] hub 1-1:1.0: 6 ports detected
    [ 2.539836] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 2.541577] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.623825] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.687279] Switched to clocksource tsc
    [ 2.748052] hub 2-1:1.0: USB hub found
    [ 2.748154] hub 2-1:1.0: 8 ports detected
    [ 2.827208] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
    [ 3.020708] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.111476] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.114205] usbcore: registered new interface driver usbhid
    [ 3.114208] usbhid: USB HID core driver
    [ 3.114758] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
    [ 3.114892] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 3.177353] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.263497] hub 2-1.6:1.0: USB hub found
    [ 3.263678] hub 2-1.6:1.0: 3 ports detected
    [ 3.530764] usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci
    [ 3.620086] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input8
    [ 3.620222] hid-generic 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.687480] usb 2-1.6.2: new full-speed USB device number 6 using ehci-pci
    [ 3.777822] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input9
    [ 3.777977] hid-generic 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
    [ 6.791593] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.770413] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 7.798237] systemd[1]: Set hostname to <MyDellora>.
    [ 8.906388] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 8.906452] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 8.906465] systemd[1]: Starting Login Prompts.
    [ 8.906476] systemd[1]: Reached target Login Prompts.
    [ 8.906483] systemd[1]: Starting Remote File Systems.
    [ 8.906491] systemd[1]: Reached target Remote File Systems.
    [ 8.906499] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 8.906530] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 8.906538] systemd[1]: Starting Delayed Shutdown Socket.
    [ 8.906563] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 8.906571] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 8.906588] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 8.906595] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 8.906618] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 8.906626] systemd[1]: Starting Encrypted Volumes.
    [ 8.906634] systemd[1]: Reached target Encrypted Volumes.
    [ 8.906666] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 8.906771] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 8.906783] systemd[1]: Starting Journal Socket.
    [ 8.906825] systemd[1]: Listening on Journal Socket.
    [ 8.923805] systemd[1]: Starting Load Kernel Modules...
    [ 8.940933] systemd[1]: Starting Apply Kernel Variables...
    [ 8.941260] systemd[1]: Starting Setup Virtual Console...
    [ 8.941566] systemd[1]: Mounting Debug File System...
    [ 8.941964] systemd[1]: Mounting POSIX Message Queue File System...
    [ 8.942263] systemd[1]: Mounting Huge Pages File System...
    [ 8.942663] systemd[1]: Starting Journal Service...
    [ 8.943150] systemd[1]: Started Journal Service.
    [ 9.533948] systemd-journald[128]: Vacuuming done, freed 0 bytes
    [ 10.753314] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 10.860199] systemd-udevd[161]: starting version 208
    [ 10.978562] systemd-journald[128]: Received request to flush runtime journal from PID 1
    [ 12.670501] ACPI: Requesting acpi_cpufreq
    [ 12.791154] ACPI: AC Adapter [AC] (on-line)
    [ 13.046379] ACPI: Battery Slot [BAT0] (battery present)
    [ 13.075713] thermal LNXTHERM:00: registered as thermal_zone0
    [ 13.075718] ACPI: Thermal Zone [THM] (61 C)
    [ 13.109004] wmi: Mapper loaded
    [ 13.169313] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 13.267456] input: PC Speaker as /devices/platform/pcspkr/input/input10
    [ 13.386188] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
    [ 13.535845] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
    [ 13.668535] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 13.668663] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 13.668776] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 13.669369] mei_me 0000:00:16.0: setting latency timer to 64
    [ 13.669426] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 13.671461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 13.671504] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671513] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671519] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671524] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 13.671562] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 13.671870] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 13.672007] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMBI 1 (20130725/utaddress-251)
    [ 13.672014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.726676] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 13.796857] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804028] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804444] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804899] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 13.871967] iTCO_vendor_support: vendor-support=0
    [ 13.912022] input: Dell WMI hotkeys as /devices/virtual/input/input16
    [ 14.205694] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 14.205738] iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
    [ 14.206640] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 14.234179] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
    [ 14.234212] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
    [ 14.234237] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
    [ 14.234286] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
    [ 14.246839] bcma: bus0: Bus registered
    [ 14.434160] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 14.434457] r8169 0000:13:00.0: irq 48 for MSI/MSI-X
    [ 14.434659] r8169 0000:13:00.0 eth0: RTL8102e at 0xffffc900212fe000, a4:ba:db:c8:85:03, XID 04e00000 IRQ 48
    [ 14.725165] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 581785
    [ 14.769986] systemd-udevd[180]: renamed network interface eth0 to enp19s0
    [ 14.800096] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
    [ 14.878089] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 15.153982] cfg80211: Calling CRDA to update world regulatory domain
    [ 15.553384] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
    [ 15.553458] b43: probe of bcma0:0 failed with error -524
    [ 15.553508] Broadcom 43xx driver loaded [ Features: PMNLS ]
    [ 15.951790] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
    [ 15.998636] media: Linux media interface: v0.10
    [ 16.075766] Linux video capture interface: v2.00
    [ 16.159110] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
    [ 16.184262] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 16.184588] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
    [ 16.229297] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
    [ 16.229578] usbcore: registered new interface driver uvcvideo
    [ 16.229581] USB Video Class driver (1.1.1)
    [ 16.373654] systemd-udevd[172]: renamed network interface wlan0 to wlp18s0
    [ 18.144304] Adding 2269180k swap on /dev/sda6. Priority:-1 extents:1 across:2269180k FS
    [ 86.950402] fuse init (API version 7.22)
    [ 277.029449] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
    [ 277.467071] NET: Registered protocol family 35
    [ 277.472157] usbcore: registered new interface driver cdc_ether
    [ 277.476281] usbcore: registered new interface driver cdc_phonet
    [ 277.483771] usb 2-1.2: bad CDC descriptors
    [ 277.484376] usbcore: registered new interface driver rndis_host
    [ 277.496455] cdc_acm 2-1.2:1.4: ttyACM0: USB ACM device
    [ 277.498229] usbcore: registered new interface driver cdc_acm
    [ 277.498258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 277.519452] usb 2-1.2: bad CDC descriptors
    [ 277.519767] usbcore: registered new interface driver rndis_wlan
    [ 288.768279] PPP generic driver version 2.4.2
    [ 293.996611] PPP BSD Compression module registered
    [ 294.129600] PPP Deflate Compression module registered
    here is the critical chain output
    systemd-analyze critical-chain
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @15.633s
    └─multi-user.target @15.633s
    └─dkms.service @11.596s +4.037s
    └─basic.target @11.593s
    └─timers.target @11.592s
    └─systemd-tmpfiles-clean.timer @11.545s
    └─sysinit.target @11.543s
    └─swap.target @11.494s
    └─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b2
    └─system.slice @2.016s
    └─-.slice @2.015s
    lines 1-14/14 (END)...skipping...
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @15.633s
    └─multi-user.target @15.633s
    └─dkms.service @11.596s +4.037s
    └─basic.target @11.593s
    └─timers.target @11.592s
    └─systemd-tmpfiles-clean.timer @11.545s
    └─sysinit.target @11.543s
    └─swap.target @11.494s
    └─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap @10.524s +41ms
    └─system.slice @2.016s
    └─-.slice @2.015s
    Last edited by Dinesh raja (2014-02-18 14:06:46)

  • Securing Arch Linux by Scrubbing SUIDs and SGIDs

    Hello.
    Scrubbing SUIDs and SGIDs has been a perennial security recommendation for Linux.  Recently I ran:
    find / ( -perm -4000 -o -perm -2000 ) -exec ls -ldb {} ;
    on one of Arch Linux machines which resulted in finding 43 SUIDs and SGIDs:
    -r-sr-xr-x  1 root root 19848 Jul  1 13:19 /bin/su
    -rwsr-xr-x  1 root root 31024 Jun 10 09:32 /bin/ping
    -rwsr-xr-x  1 root root 64816 May 13 19:15 /bin/mount
    -rwsr-xr-x  1 root root 26832 Jun 10 09:32 /bin/ping6
    -rwsr-xr-x  1 root root 31908 May 13 19:15 /bin/umount
    -rwsr-xr-x  1 root root 544452 Jun  7 06:27 /opt/kde/bin/kppp
    -rwsr-xr-x  1 root root 10341 Jan 17  2004 /opt/kde/bin/fileshareset
    -rwsr-xr-x  1 root root 5188 Jun  6 19:54 /opt/kde/bin/kgrantpty
    -rwxr-sr-x  1 root 1003 52152 Jun  6 21:07 /opt/kde/bin/kdesud
    -rwsr-xr-x  1 root root 10368 Jun  6 21:07 /opt/kde/bin/kcheckpass
    -rwsr-xr-x  1 root root 5356 Jun  6 19:54 /opt/kde/bin/kpac_dhcp_helper
    -rwsr-xr-x  1 root root 28444 Jul  1 12:58 /usr/bin/chfn
    -rwsr-xr-x  1 root root 24368 Jul  1 12:58 /usr/bin/chsh
    -rwxr-sr-x  1 root mail 78200 Sep  4  2002 /usr/bin/mail
    ---s--x--x  1 root root 85800 Jun 21  2003 /usr/bin/sudo
    -rwsr-xr-x  1 daemon daemon 8480 Jul 21 14:16 /usr/bin/lppasswd
    -rwsr-xr-x  1 root root 10032 May  5 18:15 /usr/bin/crontab
    -rwsr-xr-x  1 root root 34988 Jul  1 12:58 /usr/bin/chage
    -rwxr-sr-x  1 root tty 8012 May 13 19:15 /usr/bin/write
    -rwxr-sr-x  1 root slocate 26432 Dec  4  2003 /usr/bin/slocate
    -rwsr-xr-x  1 root root 201216 Jul 27 11:56 /usr/bin/xscreensaver
    -rws--x---  1 root cdrom 552820 Jul 20 19:06 /usr/bin/cdrdao
    -rwsr-xr-x  1 root root 15532 Jul  1 12:58 /usr/bin/expiry
    -rwsr-xr-x  1 root root 11768 Jan  6  2003 /usr/bin/netselect
    -rwsr-xr-x  1 root root 19756 Jul  1 12:58 /usr/bin/newgrp
    -rwsr-xr-x  1 root root 25004 Jul  1 12:58 /usr/bin/passwd
    -rwsr-xr-x  1 root root 32952 Jul  1 12:58 /usr/bin/gpasswd
    -rwsr-xr-x  1 root root 10564 Jul 27 11:52 /usr/bin/suexec
    -rwsr-xr-x  1 root root 68056 Oct 22  2002 /usr/bin/procmail
    -rwsr-xr-x  1 root root 306444 Dec  6  2003 /usr/bin/screen-4.0.2
    -rwsr-xr-x  1 root root 5772 Aug  3 14:48 /usr/bin/pt_chown
    -rws--x---  1 root cdrom 290364 May 30  2003 /usr/bin/cdrecord
    -rws--x--x  1 root root 132396 Apr 19 12:41 /usr/lib/ssh/ssh-keysign
    -r-sr-x---  1 root root 24676 Jan 30  2004 /usr/lib/pppd/2.4.2/rp-pppoe.so
    -rws--x--x  1 root bin 88156 May 30  2003 /usr/sbin/rscsi
    -rwsr-xr-x  1 root root 564048 Jul 23 16:48 /usr/sbin/exim-4.41-1
    -r-sr-xr-x  1 root bin 18328 Sep  4  2002 /usr/sbin/traceroute
    -rws--x--x  1 root root 1943573 Jul 10 10:22 /usr/X11R6/bin/Xorg
    -rws--x--x  1 root root 292896 Jul 10 10:22 /usr/X11R6/bin/xterm
    -rwsr-xr-x  1 root root 21790 Jul  1 14:22 /usr/X11R6/bin/xcardinfo
    -rwsr-xr-x  1 root root 9670 Jul 16 12:44 /usr/libexec/rssh_chroot_helper
    -r-sr-xr-x  1 root root 14424 Mar 16 14:52 /sbin/unix_chkpwd
    -rwsr-xr-x  1 root root 14148 Jul  1 14:22 /sbin/cardctl
    First Question: How many of these should NOT be SUID or SGID "out of the box" (i.e., on installation of Arch Linux)?
    Second Question: What are some good approaches to reducing the use of SUIDs and SGIDs?
    My approaches are: (a) deleting executables/packages that I actually don't use (for example, I will remove executables/packages I don't ever use or plan to use such as /opt/kde/bin/kppp); (b) removing the SUID or SGID bit on some of the executables.
    My concern is less with approach (a) than with (b). Which of these executables MUST be SUID or SGID to work properly?
    Regards,
    Win

    Win wrote: Which of these executables MUST be SUID or SGID to work properly?
    Probably almost all of them need to be SUID to work properly from a user account. Such programs have to access root files, usually.
    However, if you never use a particular program as user, it need not be SUID (this is usage dependent).
    Dusty

  • Dual boot Windows 7 (64) and Arch Linux (64) problems

    Hello:
    I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
    Disk Drive: /dev/sda
    Size: 160041885696 bytes, 160.0 GB
    Heads: 255 Sectors per Track: 63 Cylinders: 19457
    Name Flags Part Type FS Type [Label] Size (MB)
    sda1 Primary Unknown (27) 12889.02
    sda2 Boot Primary NTFS 106.93
    sda3 Primary NTFS [] 73915.11*
    sda5 Logical Linux ext2 65.81*
    sda6 Logical Linux 509.97*
    sda7 Logical Linux ext2 15002.92*
    sda8 Logical Linux ext2 57549.55*
    The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
    In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/sda3 ro
    initrd /kernel26.img
    My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
    Any help would be greatly appreciated.

    I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
    setup hd(0,1)
    Checking if "/boot/grub/stage1" exists.....yes
    Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
    Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
    Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
    Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
    Error 31: File is not sector aligned
    My entry for Windows into the menu.lst looks like this:
    # (0) Arch Linux x64
    title Arch Linux x64
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
    initrd /kernel26.img
    # (1) Arch Linux x64
    title Arch Linux x64 Fallback
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
    initrd /kernel26-fallback.img
    # (2) Windows 7
    title Windows 7
    rootnoverify (hd0,0)
    makeactive
    chainloader +1

  • Memory Usage.

    Good day to you all,
    Im using the miracl library for my program(www.shamus.ie). it is a c/c++ library
    I compiled its dll and made it run on windows.
    i also compiled it on linux but i didnt use the exact source codes because there are differences in compiling in linux.
    my problem is that memory usage on windows is 4mb per client while on linux, it is 23mb per client.
    Is it because i compiled the linux version wrong?
    should windows memory usage be way lower than linux memory usage?
    should i run my app on a linux or windows?
    Is JNI really faster on windows?
    Thanks
    -Aldrich
    Message was edited by:
    Aldrich

    Good day to you all,
    Im using the miracl library for my program(www.shamus.ie). it is a c/c++ library
    I compiled its dll and made it run on windows.
    i also compiled it on linux but i didnt use the exact source codes because there are differences in compiling in linux.
    my problem is that memory usage on windows is 4mb per client while on linux, it is 23mb per client.
    Is it because i compiled the linux version wrong?
    should windows memory usage be way lower than linux memory usage?
    should i run my app on a linux or windows?
    Is JNI really faster on windows?
    Thanks
    -Aldrich
    Message was edited by:
    Aldrich

  • SA520W - High memory usage, possible fix in 2.2.0 firmware?

    As suggested by Thomas Watts, I'm starting a new thread to discuss the new SA520W firmware (2.2.0) and a possible resolution to high memory usage I'm experiencing on my network.
    My current setup is: 16Mbit DSL > SA520W > SA300-10, all with stock settings (no fancy VLAN's etc.)
    I have 4 CentOS 5/6 servers and a Windows 7 Ultimate station connected to the switch. I use CIFS to connect from Windows station to the other Linux servers and send large files. I currently notice the following behavior:
    When the file transfer starts, the Intel 1Gbit NIC is nearly saturated, hitting 115MB/sec. After few seconds, the data transfer comes to a halt and the transfer speed drops to around 50MB/sec. If I check the memory usage before the file transfer, it is approximately to 50-60% (on a fresh router reboot). Every time I send large files to other machines, the router memory consumption increases and it does not lower after a reasonable delay. I end-up with high memory near 90% and the only solution I have is to reboot the router in order to bring it back to 50%.
    Now, Thomas told me that this is simply a cosmetic issue, the memory is not actually 90% used. Yet, when the memory hits this threshold, I'm not capable to send files are normal LAN speeds I'm used to. Rebooting the router allows me to send only ONCE (and for few seconds) data at the expected LAN speeds.
    I would apreciate any input from Cisco engineers as well other users who experience the same issue. I would also like to know if any related work was done into 2.2.0 firmware and when we expect to have it released to users.
    Regards,
    Floren Munteanu

    Hi Tom,
    See below the answers.
    Are you currently running the 2.1.71 code?
    Yes
    Are you using IPS?
    No, the LAN is for internal use (no external users allowed)
    Are you using Protectlink services?
    No
    Hardware wise, I did not changed anything on machines. All boxes have dual Intel EXPI9301CT NIC's (LACP was planned) but I currently use single connections for sanity reasons (disks won't allow greater speeds anyway). Previous to Cisco, I used a Netgear ProSafe router + switch which did not encountered the issues I mention. Honestly, at first I thought I'm dealing with some stupid disk issues on Windows. So I ran a quick test and the stats are proper:
    > winsat disk -drive c
    > Disk  Sequential 64.0 Read                   109.62 MB/s        6.5
    > Disk  Random 16.0 Read                       2.47 MB/s          4.4
    > Responsiveness: Average IO Rate              2.12 ms/IO         6.9
    > Responsiveness: Grouped IOs                  8.34 units         7.4
    > Responsiveness: Long IOs                     5.59 units         7.7
    > Responsiveness: Overall                      46.63 units        7.1
    > Responsiveness: PenaltyFactor                0.0
    > Disk  Sequential 64.0 Write                  117.03 MB/s        6.7
    > Average Read Time with Sequential Writes     6.977 ms           5.3
    > Latency: 95th Percentile                     32.720 ms          3.0
    > Latency: Maximum                             118.231 ms         7.6
    > Average Read Time with Random Writes         13.346 ms          3.7
    > Total Run Time 00:01:39.50
    As I mentioned before, everything is pretty much stock on router/switch settings. If you have any tips that allow me to identify the cause, I would appreciate the input. What puzzles me is the speed drop and quick memory usage increase. It occurs 7-10 seconds after the transfers begins. It looks like the data transfer hangs for a very short period of time (less than half of second) and the transfer speed decreases from 110-115MB/sec to 50-60MB/sec. The transfer is completed at this speed. No matter how many other files I try to transfer after, the speed won't go higher than 60MB/sec. If I reboot the router, I get the same cycle.

  • High RAM memory usage compared to other systems

    I'm suffering with memory usage problems, only in open 2 tabs of facebook(it's only for example, any 'heavy' page freeze also) in firefox*(for example also, but this occur in chromium also) freeze computer.
    I've 1GB of memory, it isn't big but also isn't very little.
    I'm using XFCE with compiz (yes, compiz, since use a very lightweight openbox-based session doesn't help, then compiz...) when system start (after login) system is consuming 130MB approximately of RAM.
    after 1 hour if close all open apps and see memory usage again consume is something about 350MB, "only solution" is reboot.
    all applications(htop,free -m,xfce's system monitor...) that I've tried to monitor memory usage show above scenario, except the 'ps_mem' script in AUR.
    in the 'ps_mem' script the result is following (with opera browser open, less memory offensive browser but I really prefer firefox):
    Private + Shared = RAM used Program
    88.0 KiB + 10.0 KiB = 98.0 KiB agetty
    380.0 KiB + 34.5 KiB = 414.5 KiB sshd
    408.0 KiB + 93.0 KiB = 501.0 KiB gpg-agent (2)
    372.0 KiB + 142.0 KiB = 514.0 KiB avahi-daemon (2)
    456.0 KiB + 60.0 KiB = 516.0 KiB systemd-logind
    280.0 KiB + 261.0 KiB = 541.0 KiB sh
    476.0 KiB + 103.5 KiB = 579.5 KiB xfconfd
    476.0 KiB + 153.5 KiB = 629.5 KiB gvfsd
    604.0 KiB + 34.5 KiB = 638.5 KiB systemd-udevd
    588.0 KiB + 102.5 KiB = 690.5 KiB dbus-launch (3)
    576.0 KiB + 119.5 KiB = 695.5 KiB sudo
    668.0 KiB + 77.5 KiB = 745.5 KiB cups-browsed
    620.0 KiB + 179.5 KiB = 799.5 KiB at-spi2-registryd
    804.0 KiB + 67.0 KiB = 871.0 KiB htop
    756.0 KiB + 131.0 KiB = 887.0 KiB gconfd-2
    800.0 KiB + 126.0 KiB = 926.0 KiB upowerd
    752.0 KiB + 183.5 KiB = 935.5 KiB xscreensaver
    920.0 KiB + 85.0 KiB = 1.0 MiB cupsd
    876.0 KiB + 241.0 KiB = 1.1 MiB gvfsd-fuse
    692.0 KiB + 429.0 KiB = 1.1 MiB systemd-journald
    880.0 KiB + 273.5 KiB = 1.1 MiB at-spi-bus-launcher
    1.2 MiB + 125.0 KiB = 1.3 MiB udisksd
    1.4 MiB + 486.5 KiB = 1.9 MiB dbus-daemon (5)
    1.4 MiB + 533.5 KiB = 1.9 MiB panel-6-systray
    1.5 MiB + 430.0 KiB = 2.0 MiB lightdm (2)
    1.6 MiB + 572.0 KiB = 2.1 MiB xfce4-session
    1.5 MiB + 683.0 KiB = 2.2 MiB panel-5-datetim
    1.5 MiB + 706.5 KiB = 2.2 MiB panel-2-actions
    1.6 MiB + 723.0 KiB = 2.3 MiB panel-4-systeml
    2.0 MiB + 543.5 KiB = 2.5 MiB xfsettingsd
    2.0 MiB + 579.5 KiB = 2.6 MiB systemd (3)
    2.3 MiB + 815.0 KiB = 3.1 MiB emerald
    2.8 MiB + 578.5 KiB = 3.3 MiB gnome-keyring-daemon (3)
    3.2 MiB + 946.5 KiB = 4.1 MiB zsh (2)
    16.1 MiB + -12144.0 KiB = 4.2 MiB polkitd
    4.1 MiB + 465.0 KiB = 4.6 MiB notify-osd
    4.5 MiB + 1.6 MiB = 6.2 MiB xfce4-panel
    5.1 MiB + 1.2 MiB = 6.3 MiB panel-7-mixer
    7.7 MiB + 1.4 MiB = 9.0 MiB xterm (2)
    12.0 MiB + 636.0 KiB = 12.6 MiB opera:libflashp
    24.3 MiB + -10774.5 KiB = 13.8 MiB Xorg
    18.6 MiB + 1.1 MiB = 19.7 MiB gnome-do (2)
    23.2 MiB + 2.4 MiB = 25.6 MiB compiz
    168.4 MiB + 3.2 MiB = 171.7 MiB opera
    320.1 MiB
    =================================
    as you can see in 'ps_mem' memory usage isn't nothing absurdly it's ok.
    another example, this problem stop me make certain things, for example is impossible browsing in web while programming in eclipse, this is very uncomfortable.
    other thing, this not occur in Windows XP, I can open more than 10 tabs in firefox, and eclipse open, etc...
    any needing information, tell-me!
    firefox*: with memory cache turned off in about:config
    Last edited by hotvic (2013-08-12 17:42:21)

    hotvic, could you please change the title to something more descriptive? 'memory problems' sounds like you have problems e.g. remembering / recalling things, which is not an Arch issue ;P
    kenny3794 wrote:
    I've had some limiting performance with browsers lately (Firefox and Chromium).  I found it had a considerable cache size utilizing lots of fragmented space on my home directory. I cleared the cache and have since set a limit to the cache size of 30 MB for Firefox.  Between multiple users across multiple browser sessions, I had at least 2 GB of cache data on my 10 GB home partition!  So far (1 day), this has been helpful.  Perhaps this could help you also?
    Ken
    OP is talking about RAM, not HDD space.

Maybe you are looking for