Arch Linux minimum requirements and recommended?

I'm setting up my shop and I need to know the minimum requirements for Arch Linux. Processor speed? Hard drive space? I know that the RAM is 64MB...

Taken from the installation guide
What You Will Need
* a working knowledge of Linux and your system, especially your
hardware
* Arch Linux installation media (see the mirror list)
+ Arch Linux Install CD
* an i686-based or x86-64 computer (PPro, Pentium 2 or higher, Athlon/Duron,
etc. Note that AMD K6, Transmeta Crusoe, CyrixIII, and VIA-C3 are
NOT supported.)
* 128 MB RAM
* some time to kill
hope that helps

Similar Messages

Final Cut Studio 2: Requirements and Recommendations

Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b

SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo

The 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly

the 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly
Hello I'm also getting this error.. can anybody help me out? Here's my log.
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2128 MHz
Built-in memory: 2934 MB
Free memory: 231 MB
Memory available to Photoshop: 2354 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="2.1"
glgpu[0].GLMemoryMB=1242
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="8.15.10.2993"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=70
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32"
glgpu[0].GLDriverDate="20130130000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20 - Intel Build 8.15.10.2993"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\ANNABE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 298.0G, 63.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2014/04/14-23:42:44   79.554120   79.554120
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdbePM.dll   PatchMatch 2014/04/23-10:46:55   79.554276   79.554276
   AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
   AdobeOwl.dll   Adobe Owl 2014/03/05-14:49:37   5.0.33   79.552883
   AdobePDFL.dll   PDFL 2014/03/04-00:39:42   79.510482   79.510482
   AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
   AdobeXMP.dll   Adobe XMP Core 2014/01/13-19:44:00   79.155772   79.155772
   AdobeXMPFiles.dll   Adobe XMP Files 2014/01/13-19:44:00   79.155772   79.155772
   AdobeXMPScript.dll   Adobe XMP Script 2014/01/13-19:44:00   79.155772   79.155772
   adobe_caps.dll   Adobe CAPS   8,0,0,7
   AGM.dll   AGM 2014/04/14-23:42:44   79.554120   79.554120
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   amtlib.dll   AMTLib (64 Bit)   8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30)   1.000000
   ARE.dll   ARE 2014/04/14-23:42:44   79.554120   79.554120
   AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
   AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
   Bib.dll   BIB 2014/04/14-23:42:44   79.554120   79.554120
   BIBUtils.dll   BIBUtils 2014/04/14-23:42:44   79.554120   79.554120
   boost_date_time.dll   photoshopdva   8.0.0
   boost_signals.dll   photoshopdva   8.0.0
   boost_system.dll   photoshopdva   8.0.0
   boost_threads.dll   photoshopdva   8.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
   CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
   CoolType.dll   CoolType 2014/04/14-23:42:44   79.554120   79.554120
   dvaaudiodevice.dll   photoshopdva   8.0.0
   dvacore.dll   photoshopdva   8.0.0
   dvamarshal.dll   photoshopdva   8.0.0
   dvamediatypes.dll   photoshopdva   8.0.0
   dvametadata.dll   photoshopdva   8.0.0
   dvametadataapi.dll   photoshopdva   8.0.0
   dvametadataui.dll   photoshopdva   8.0.0
   dvaplayer.dll   photoshopdva   8.0.0
   dvatransport.dll   photoshopdva   8.0.0
   dvaui.dll   photoshopdva   8.0.0
   dvaunittesting.dll   photoshopdva   8.0.0
   dynamiclink.dll   photoshopdva   8.0.0
   ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
   icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   imslib.dll   IMSLib DLL   7.0.0.145
   JP2KLib.dll   JP2KLib 2014/03/12-08:53:44   79.252744   79.252744
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   7.2.1.3399
   mediacoreif.dll   photoshopdva   8.0.0
   MPS.dll   MPS 2014/03/25-23:41:34   79.553444   79.553444
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC 2014   15.0
   Plugin.dll   Adobe Photoshop CC 2014   15.0
   PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.0.0.74
   PSArt.dll   Adobe Photoshop CC 2014   15.0
   PSViews.dll   Adobe Photoshop CC 2014   15.0
   SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
   ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
   VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
   WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 15.0 (2014.0.0 x001)
   Accented Edges 15.0
   Adaptive Wide Angle 15.0
   Angled Strokes 15.0
   Average 15.0 (2014.0.0 x001)
   Bas Relief 15.0
   BMP 15.0
   Camera Raw 8.0
   Camera Raw Filter 8.0
   Chalk & Charcoal 15.0
   Charcoal 15.0
   Chrome 15.0
   Cineon 15.0 (2014.0.0 x001)
   Clouds 15.0 (2014.0.0 x001)
   Collada 15.0 (2014.0.0 x001)
   Color Halftone 15.0
   Colored Pencil 15.0
   CompuServe GIF 15.0
   Conté Crayon 15.0
   Craquelure 15.0
   Crop and Straighten Photos 15.0 (2014.0.0 x001)
   Crop and Straighten Photos Filter 15.0
   Crosshatch 15.0
   Crystallize 15.0
   Cutout 15.0
   Dark Strokes 15.0
   De-Interlace 15.0
   Dicom 15.0
   Difference Clouds 15.0 (2014.0.0 x001)
   Diffuse Glow 15.0
   Displace 15.0
   Dry Brush 15.0
   Eazel Acquire 15.0 (2014.0.0 x001)
   Embed Watermark 4.0
   Entropy 15.0 (2014.0.0 x001)
   Export Color Lookup NO VERSION
   Extrude 15.0
   FastCore Routines 15.0 (2014.0.0 x001)
   Fibers 15.0
   Film Grain 15.0
   Filter Gallery 15.0
   Flash 3D 15.0 (2014.0.0 x001)
   Fresco 15.0
   Glass 15.0
   Glowing Edges 15.0
   Google Earth 4 15.0 (2014.0.0 x001)
   Grain 15.0
   Graphic Pen 15.0
   Halftone Pattern 15.0
   HDRMergeUI 15.0
   IFF Format 15.0
   Ink Outlines 15.0
   JPEG 2000 15.0
   Kurtosis 15.0 (2014.0.0 x001)
   Lens Blur 15.0
   Lens Correction 15.0
   Lens Flare 15.0
   Liquify 15.0
   Matlab Operation 15.0 (2014.0.0 x001)
   Maximum 15.0 (2014.0.0 x001)
   Mean 15.0 (2014.0.0 x001)
   Measurement Core 15.0 (2014.0.0 x001)
   Median 15.0 (2014.0.0 x001)
   Mezzotint 15.0
   Minimum 15.0 (2014.0.0 x001)
   MMXCore Routines 15.0 (2014.0.0 x001)
   Mosaic Tiles 15.0
   Multiprocessor Support 15.0 (2014.0.0 x001)
   Neon Glow 15.0
   Note Paper 15.0
   NTSC Colors 15.0 (2014.0.0 x001)
   Ocean Ripple 15.0
   OpenEXR 15.0
   Paint Daubs 15.0
   Palette Knife 15.0
   Patchwork 15.0
   Paths to Illustrator 15.0
   PCX 15.0 (2014.0.0 x001)
   Photocopy 15.0
   Photoshop 3D Engine 15.0 (2014.0.0 x001)
   Photoshop Touch 14.0
   Picture Package Filter 15.0 (2014.0.0 x001)
   Pinch 15.0
   Pixar 15.0 (2014.0.0 x001)
   Plaster 15.0
   Plastic Wrap 15.0
   PNG 15.0
   Pointillize 15.0
   Polar Coordinates 15.0
   Portable Bit Map 15.0 (2014.0.0 x001)
   Poster Edges 15.0
   Radial Blur 15.0
   Radiance 15.0 (2014.0.0 x001)
   Range 15.0 (2014.0.0 x001)
   Read Watermark 4.0
   Render Color Lookup Grid NO VERSION
   Reticulation 15.0
   Ripple 15.0
   Rough Pastels 15.0
   Save for Web 15.0
   ScriptingSupport 15.0
   Shake Reduction 15.0
   Shear 15.0
   Skewness 15.0 (2014.0.0 x001)
   Smart Blur 15.0
   Smudge Stick 15.0
   Solarize 15.0 (2014.0.0 x001)
   Spatter 15.0
   Spherize 15.0
   Sponge 15.0
   Sprayed Strokes 15.0
   Stained Glass 15.0
   Stamp 15.0
   Standard Deviation 15.0 (2014.0.0 x001)
   STL 15.0 (2014.0.0 x001)
   Sumi-e 15.0
   Summation 15.0 (2014.0.0 x001)
   Targa 15.0
   Texturizer 15.0
   Tiles 15.0
   Torn Edges 15.0
   Twirl 15.0
   Underpainting 15.0
   Vanishing Point 15.0
   Variance 15.0 (2014.0.0 x001)
   Water Paper 15.0
   Watercolor 15.0
   Wave 15.0
   Wavefront|OBJ 15.0 (2014.0.0 x001)
   WIA Support 15.0 (2014.0.0 x001)
   Wind 15.0
   Wireless Bitmap 15.0 (2014.0.0 x001)
   ZigZag 15.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE

What Intel video card do you have? The only Intel HD graphics cards officially supported by Photoshop CC are:
Intel HD Graphics P3000
Intel HD Graphics P4000
Intel(R) HD Graphics P4600/P4700
Intel HD Graphics 5000
Go here to read more about the requirements: Photoshop CC and CC 2014 GPU FAQ

Install Arch Linux with UEFI and GPT

Hi, I purchased a new laptop and I created a partition with Windows 8 (default OS on laptop) and another partition where I want to install Arch Linux.
When I tried to install Arch Linux not boot from CD. After searching in Google I downloaded the latest Arch Linux ISO (2012-12-01) and tried again.
This time CD started without problems but when I used cfdisk showed an error with GPT partition. I went back to search in Google and I read about gdisk and gfdisk and I try it but when I partitioning to install Arch Linux partition show that may cause damage. I searched and searched without success and I wonder if there is a Arch Linux GPT install guide or if someone knows how to install Arch Linux with GPT and a Windows 8 partition in UEFI.
Thanks and regards.

Hi again, finally I got "install" Arch Linux but when I reboot the follow message appears:
"No Booteable Device, Hit any key."
I don't know if I broke Windows Boot Manager, UEFI or both...
I tried to reinstall GRUB but was unsuccessful.
Can anyone help me?
Thanks and regards.

One question about arch linux 2009.02 and ext4

hi,
i want to download newest arch linux version. i heard i can select file system type as ext4, that sounds cool, because i really want ext4. anyway i heard that you need grub2 to properly boot ext4 arch system. so is grub2 will be included in arch linux 09.02? because my root partition is going to be in ext4 file system. thanks for help

syms wrote:
skottish wrote:
syms wrote:Thanks for help. i have one more question - how much ext4 seems faster than ext3? i mean do you feel that ext4 is faster than ext3 in most cases? thanks.
I've never done any benchmarks, but I can tell you that file system checks are many, many times faster.
I do have a warning though, and it can be confirmed by others in this forum: ext4 does not crash gracefully right now. If you're on an unstable system, crashing can cause the loss of at least configuration files. My workstation is rock solid, so I've never seen any issues. Another computer that I was working on was having crashes due to an older Intel card with the newer xorg, and configuration files were being killed all over the place.
Thanks. another thing is that about application start up. for example for me firefox starts in 4 seconds, when i close ff and try to run it again, it opens in about 1 second. what it would with ext4 system? maybe it would launch in 2 seconds at first start?
It's hard to guess like that, but it's bound to be the same or faster. You're not losing anything going ext4 and it is a faster filesystem in general.

UArch - arch linux for embeded and old machines

Hello all,
just wanted to post the new web site for uArch it can be found at
http://code.google.com/p/uarch/
check it out and let me know what you think..
zio
Last edited by zio (2008-03-31 06:21:21)

zio wrote:There back in place, if your doing an install can you use the pacman.static instructions. Just to verify the instructions are still working, should work. But I haven't tested yet
Thx for the prompt response , I've tried both methods with the static pacman and the one of my system. But unfortunately both attempts failed because of bad md5sums .
error: failed to commit transaction (corrupted package)
file gcc-4.2.1-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file klibc-1.5-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file klibc-udev-116-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file openssl-0.9.8g-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file pciutils-2.2.8-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file sysfsutils-2.1.0-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)
file vi-7.1.293-1-i386-uclibc.pkg.tar.gz was corrupted (bad MD5 checksum)

[SOLVED]Arch Linux, and Windows 8.1 Dual Boot issue

Hi guys. I recently bought a new laptop, and decided to run Arch Linux and Windows 8.1. I installed Windows 8.1 first as recommended by the beginners guide, and then installed Arch Linux. I made sure UEFI was enabled in my BIOS, and made sure everything was on a GPT partition. The install itself went fine. My laptop loads grub, and Arch Linux shows up and boots, but there is no option to boot into Windows 8.1. The only way I can boot into Windows 8.1 is by accessing my motherboard, and choosing to launch the windows boot manager instead of the grub launcher. How can I get Windows 8.1 to show up in grub? Thanks in advance guys.
Last edited by Painguy (2014-08-20 20:19:37)

Painguy wrote:
-----------Edit------------------
Yeah just ran this after installing os prober
grub-mkconfig -o /boot/grub/grub.cfg
and it works now. Sorry for the crazy posts guys. Thanks for the suggestions and help.
Yeah I'm sure I'm doing something wrong lol. I did not install OS-Prober. I think that's where the issue is. I'm missing the menu entry in grub.cfg right? Do I just run os prober or do I have to manually edit grub.cfg.
If that's not the case then here is what I did up until now. What I did was start with a blank SSD drive. I used cgdisk to make the disk use a GPT partitioning scheme. I installed windows 8.1 and checked in windows to make sure it boots into UEFI-GPT mode and it does. I then installed arch linux using the beginners guide. I made sure to use cgdisk to create any extra partitions, and installed GRUB to the efi partition that windows had created ( I did not format this partition ). I then finished the installation and rebooted, and Grub only shows arch linux. I don't think I'm dealing with anything MBR related. I made sure I used the GPT partitioning scheme....i think lol.
All you need to do is run os-prober then run grub-mkconfig. It should pick up Windows at that point.

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

Arch Linux and ARM

We have been talking to the Arch Linux ARM team and have decided to refine our policy around that architecture.
The Other Architectures forum has been moved into the Technical Issues and Asssistance category, and the ARM sticky has been updated with clearer direction about our policy.
If you are an ARM user, please take a couple of minutes to familiarize yourself with the updated policy. Both the Arch mod team and the ALARM team feel that this is the best way to ensure that assistance is sought from the community that is best placed to help.

Whoa, everyone's reading far too much into what I said. I just meant that I got it installed under the chroot in android following the steps that were on the plugapps site; the actual page doesn't seem to exist anymore, but I found similar instructions here. I meant that I thought it was cool that I had a functioning build of pacman running locally on the device. Didn't mean to imply that it was a native install.
Although I understand the reaction as I'm watching the developments in this thread with just as much anticipation.
Last edited by jb (2011-06-30 18:00:45)

Installed arch linux on windows 8 laptop and with GNOME

Hi all,
I am trying to learn more about linux and decided to go the Arch Linux way. I've battled through a bunch of issues before I got to this point so I might have fudged something along the way.
The current issue is that I install GNOME, and it boots up into GNOME, and I select my username and type my password, and then I see black screen with blinking cursor for 10 seconds after which I am returned to GNOME login screen. It doesn't do a system reboot before going back to the login screen.
The only way to stop this is to put in my livecd arch-linux usb drive and then delete GNOME, after which arch linux will boot back into terminal. (I wish I knew how to do this without using the usb drive)
What should I look at for hints? I don't see any output when this loop happens.
Thanks!

Ok that works and I can log in. However I don't see any familiar drives mounted. Anyway, I have the output from journalctl. Here it is
Mar 07 18:34:57 localhost systemd[1]: Started User Manager for UID 120.
Mar 07 18:34:57 localhost org.a11y.Bus[311]: Activating service name='org.a11y.atspi.Registry'
Mar 07 18:34:57 localhost org.a11y.Bus[311]: Successfully activated service 'org.a11y.atspi.Registry'
Mar 07 18:34:57 localhost org.a11y.atspi.Registry[318]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Mar 07 18:34:57 localhost gnome-session[307]: gnome-session[307]: WARNING: Could not parse desktop file orca-autostart.desktop or it references a not found TryExec binary
Mar 07 18:34:57 localhost gnome-session[307]: WARNING: Could not parse desktop file orca-autostart.desktop or it references a not found TryExec binary
Mar 07 18:34:57 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 07 18:34:57 localhost systemd[1]: Starting Daemon for power management...
Mar 07 18:34:57 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 07 18:34:57 localhost systemd[1]: Started Daemon for power management.
Mar 07 18:34:57 localhost upowerd[335]: (upowerd:335): UPower-Linux-WARNING **: energy 49.705840 bigger than full 49.698200
Mar 07 18:34:57 localhost systemd[1]: Mounting FUSE Control File System...
Mar 07 18:34:57 localhost kernel: fuse init (API version 7.23)
Mar 07 18:34:57 localhost systemd[1]: Mounted FUSE Control File System.
Mar 07 18:34:57 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Mar 07 18:34:57 localhost systemd[1]: Starting Manage, Install and Generate Color Profiles...
Mar 07 18:34:57 localhost gnome-session[307]: Entering running state
Mar 07 18:34:57 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Mar 07 18:34:57 localhost systemd[1]: Started Manage, Install and Generate Color Profiles.
Mar 07 18:34:57 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Mar 07 18:34:57 localhost systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Mar 07 18:34:57 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Mar 07 18:34:57 localhost rtkit-daemon[382]: Successfully called chroot.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Successfully dropped privileges.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Successfully limited resources.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Running.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Canary thread running.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Watchdog thread running.
Mar 07 18:34:57 localhost systemd[1]: Started RealtimeKit Scheduling Policy Service.
Mar 07 18:34:57 localhost gdm-Xorg-:0[241]: (II) intel(0): EDID vendor "SHP", prod id 5153
Mar 07 18:34:57 localhost gdm-Xorg-:0[241]: (II) intel(0): Printing DDC gathered Modelines:
Mar 07 18:34:57 localhost gdm-Xorg-:0[241]: (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
Mar 07 18:34:57 localhost rtkit-daemon[382]: Successfully made thread 381 of process 381 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Supervising 1 threads of 1 processes of 1 users.
Mar 07 18:34:57 localhost colord[374]: /usr/lib/colord/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Mar 07 18:34:57 localhost rtkit-daemon[382]: Supervising 1 threads of 1 processes of 1 users.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Successfully made thread 389 of process 381 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Mar 07 18:34:57 localhost rtkit-daemon[382]: Supervising 2 threads of 1 processes of 1 users.
Mar 07 18:34:57 localhost dbus[209]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Mar 07 18:34:57 localhost dbus[209]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Mar 07 18:34:57 localhost pulseaudio[381]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
Mar 07 18:34:57 localhost pulseaudio[381]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
Mar 07 18:34:57 localhost pulseaudio[381]: [pulseaudio] main.c: Module load failed.
Mar 07 18:34:57 localhost pulseaudio[381]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Mar 07 18:34:58 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Mar 07 18:34:58 localhost systemd[1]: Starting Locale Service...
Mar 07 18:34:58 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.locale1'
Mar 07 18:34:58 localhost systemd[1]: Started Locale Service.
Mar 07 18:34:58 localhost gnome-session[307]: Gjs-Message: JS LOG: Failed to launch ibus-daemon: Failed to execute child process "ibus-daemon" (No such file or directory)
Mar 07 18:34:58 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.GeoClue2' unit='geoclue.service'
Mar 07 18:34:58 localhost systemd[1]: Starting Location Lookup Service...
Mar 07 18:34:58 localhost dbus[209]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
Mar 07 18:34:58 localhost systemd[1]: Starting WPA supplicant...
Mar 07 18:34:58 localhost dbus[209]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Mar 07 18:34:58 localhost systemd[1]: Started WPA supplicant.
Mar 07 18:34:58 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.GeoClue2'
Mar 07 18:34:58 localhost systemd[1]: Started Location Lookup Service.
Mar 07 18:34:58 localhost polkitd[247]: Registered Authentication Agent for unix-session:c1 (system bus name :1.15 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale C)
Mar 07 18:34:58 localhost gnome-session[307]: Gjs-Message: JS LOG: No permission to trigger offline updates: Polkit.Error: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered
Mar 07 18:34:58 localhost org.gnome.OnlineAccounts[311]: goa-daemon-Message: goa-daemon version 3.14.3 starting
Mar 07 18:34:58 localhost dbus[209]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Mar 07 18:34:58 localhost systemd[1]: Starting Disk Manager...
Mar 07 18:34:58 localhost udisksd[428]: udisks daemon version 2.1.4 starting
Mar 07 18:34:58 localhost dbus[209]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Mar 07 18:34:58 localhost udisksd[428]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Mar 07 18:34:58 localhost systemd[1]: Started Disk Manager.
Mar 07 18:34:59 localhost gnome-session[307]: Gjs-Message: JS LOG: GNOME Shell started at Sat Mar 07 2015 18:34:58 GMT+0000 (UTC)
Mar 07 18:35:11 localhost gdm-password][441]: pam_unix(gdm-password:session): session opened for user asadali by (uid=0)
Mar 07 18:35:11 localhost systemd[1]: Starting user-1000.slice.
Mar 07 18:35:11 localhost systemd[1]: Created slice user-1000.slice.
Mar 07 18:35:11 localhost systemd[1]: Starting User Manager for UID 1000...
Mar 07 18:35:11 localhost systemd[445]: pam_unix(systemd-user:session): session opened for user asadali by (uid=0)
Mar 07 18:35:11 localhost systemd[1]: Starting Session c2 of user asadali.
Mar 07 18:35:11 localhost systemd-logind[207]: New session c2 of user asadali.
Mar 07 18:35:11 localhost systemd[1]: Started Session c2 of user asadali.
Mar 07 18:35:11 localhost systemd[445]: Starting Sockets.
Mar 07 18:35:11 localhost systemd[445]: Reached target Sockets.
Mar 07 18:35:11 localhost systemd[445]: Starting Paths.
Mar 07 18:35:11 localhost systemd[445]: Reached target Paths.
Mar 07 18:35:11 localhost systemd[445]: Starting Timers.
Mar 07 18:35:11 localhost systemd[445]: Reached target Timers.
Mar 07 18:35:11 localhost systemd[445]: Starting Basic System.
Mar 07 18:35:11 localhost systemd[445]: Reached target Basic System.
Mar 07 18:35:11 localhost systemd[445]: Starting Default.
Mar 07 18:35:11 localhost systemd[445]: Reached target Default.
Mar 07 18:35:11 localhost systemd[445]: Startup finished in 4ms.
Mar 07 18:35:11 localhost systemd[1]: Started User Manager for UID 1000.
Mar 07 18:35:11 localhost gdm-Xorg-:0[241]: (II) AIGLX: Suspending AIGLX clients for VT switch
Mar 07 18:35:32 localhost gnome-session[453]: WARNING: IceLockAuthFile failed: Permission denied
Mar 07 18:35:32 localhost gdm-password][441]: pam_unix(gdm-password:session): session closed for user asadali
Mar 07 18:35:32 localhost gnome-session[453]: gnome-session[453]: WARNING: IceLockAuthFile failed: Permission denied
Mar 07 18:35:32 localhost gdm-Xorg-:0[241]: (II) AIGLX: Resuming AIGLX clients after VT switch
Mar 07 18:35:32 localhost gdm-Xorg-:0[241]: (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
Mar 07 18:35:32 localhost gdm-session-worker[441]: <3>GLib: Source ID 39 was not found when attempting to remove it
Mar 07 18:35:32 localhost gdm-Xorg-:0[241]: (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: touchpad found
Mar 07 18:37:09 localhost gdm-password][475]: pam_unix(gdm-password:session): session opened for user asadali by (uid=0)
Mar 07 18:37:09 localhost systemd[1]: Starting Session c3 of user asadali.
Mar 07 18:37:09 localhost systemd-logind[207]: New session c3 of user asadali.
Mar 07 18:37:09 localhost systemd[1]: Started Session c3 of user asadali.
Mar 07 18:37:09 localhost gdm[213]: GLib-GObject: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Mar 07 18:37:09 localhost gdm[213]: GLib-GObject: g_object_get: assertion 'G_IS_OBJECT (object)' failed
Mar 07 18:37:09 localhost gdm[213]: GLib-GObject: g_object_set_data_full: assertion 'G_IS_OBJECT (object)' failed
Mar 07 18:37:09 localhost gdm[213]: gdm_display_get_timed_login_details: assertion 'GDM_IS_DISPLAY (display)' failed
Mar 07 18:37:10 localhost gdm-Xorg-:0[241]: (II) AIGLX: Suspending AIGLX clients for VT switch
Mar 07 18:37:30 localhost gnome-session[484]: WARNING: IceLockAuthFile failed: Permission denied
Mar 07 18:37:30 localhost gnome-session[484]: gnome-session[484]: WARNING: IceLockAuthFile failed: Permission denied
Mar 07 18:37:30 localhost gdm-password][475]: pam_unix(gdm-password:session): session closed for user asadali
Mar 07 18:37:30 localhost gdm-Xorg-:0[241]: (II) AIGLX: Resuming AIGLX clients after VT switch
Mar 07 18:37:30 localhost gdm-Xorg-:0[241]: (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
Mar 07 18:37:30 localhost gdm-session-worker[475]: <3>GLib: Source ID 40 was not found when attempting to remove it
Mar 07 18:37:30 localhost gdm-Xorg-:0[241]: (--) synaptics: DLL0665:01 06CB:76AD UNKNOWN: touchpad found
Mar 07 18:37:34 localhost gdm-Xorg-:0[241]: (II) AIGLX: Suspending AIGLX clients for VT switch
Mar 07 18:38:21 localhost systemd[1]: Starting Getty on tty4...
Mar 07 18:38:21 localhost systemd[1]: Started Getty on tty4.
Mar 07 18:38:27 localhost login[503]: pam_unix(login:session): session opened for user asadali by LOGIN(uid=0)
Mar 07 18:38:27 localhost systemd[1]: Starting Session c4 of user asadali.
Mar 07 18:38:27 localhost systemd-logind[207]: New session c4 of user asadali.
Mar 07 18:38:27 localhost systemd[1]: Started Session c4 of user asadali.
Mar 07 18:38:27 localhost login[503]: LOGIN ON tty4 BY asadali
Mar 07 18:40:43 localhost kernel: usb 1-2: USB disconnect, device number 2
Mar 07 18:40:43 localhost systemd-udevd[163]: error opening USB device 'descriptors' file
Mar 07 18:40:43 localhost colord[374]: /usr/lib/colord/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Mar 07 18:40:43 localhost kernel: usb 1-2: new high-speed USB device number 6 using xhci_hcd
Mar 07 18:40:43 localhost colord[374]: /usr/lib/colord/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Mar 07 18:40:43 localhost colord[374]: /usr/lib/colord/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Mar 07 18:40:43 localhost kernel: usbcore: registered new interface driver cdc_ether
Mar 07 18:40:43 localhost kernel: rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 02:56:06:5d:63:36
Mar 07 18:40:43 localhost kernel: usbcore: registered new interface driver rndis_host
Mar 07 18:40:43 localhost colord[374]: /usr/lib/colord/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Mar 07 18:40:43 localhost kernel: rndis_host 1-2:1.0 enp0s20u2: renamed from usb0
Mar 07 18:40:49 localhost sudo[526]: asadali : TTY=tty4 ; PWD=/home/asadali ; USER=root ; COMMAND=/usr/bin/systemctl restart dhcpcd
I only posted a piece of it.
By the way, I got this file by using startX (becuase otherwise i didnt have permissions), used > to output it to a file, mounted a usb flash drive, copied it to flash drive, used a windows computer to copy the file to my ubuntu laptop (because the folder wouldn't show up in the ubuntu computer) and then posted it here. There has to be a better way to post a debug manage on here.

Incorporating both Arch Linux and a package repository onto one DVD.

Dear Arch Linux community,
I would like to tell you a little background information about myself before I start to talk about my actual subject. I know that this part of my message does not belong here, but it is my own ritual to do it like this in my first message in every community. I hope I can make friends with people here and try not to harm this community in any way. Thank you for reading this.
I am a 16-year-old male student from Finland and addicted to GNU/Linux and freeware / open source software. My previous experience with GNU/Linux is fairly large; from thin client Debian GNU/Linux administrator to kernel hacker and software developer. My delight is music, particularly writing and composing my own music tracks which vary from classic chiptunes to acid trance and dance beats. Arch Linux seems to be a great GNU/Linux operating system for me, because I am looking for a GNU/Linux distribution that does not focus on desktop, but rather on simplicity and lightweight solutions. I also do not fear "bleeding edge" software which is a positive point for Arch Linux compared to Debian GNU/Linux. As you can probably notice I have been using Debian GNU/Linux before I considered Arch Linux. However now I am here hoping for a totally new experience from Arch Linux.
Enough with my foreword, I would like to now go back to the actual subject. Usually I use DVD media for GNU/Linux images to have both the installer for the GNU/Linux distribution and the main package repository to make installations faster and to have the possibility for an offline installation. As I see, Arch Linux provides only CD images which are approximately 160MB in size, making me to think about incorporating Arch Linux's "Core" and "Extra" package repositories to fill up the remaining 4GB on the DVD. If the "Core" package repository is already included in the Arch Linux CD image, please forgive my lack of information as this is the first time I have ever entered to the world of Arch Linux.
My question is as follows: Is it possible to incorporate Arch Linux and a package repository onto one DVD while retaining the ability to install Arch Linux from that DVD? If positive, how should I go on to do it?
Thank you in advance!
Last edited by Amplify.EXE (2007-11-09 20:53:44)

No niin, tervetuloa arch-mailmaan.
Ok, I better stop at one sentence before someone gets mad at me :roll:.
To answer your question, yes. It is quite possible to put something like that together, heck I think someone suggested we should distribute those some time, but we decided not to (don't quote me, I'm too lazy to read the archives right now) since in most cases pacman will get the job done will job done with less bandwidth waste, and distributing huge snapshots isn't really too conducive to the whole rolling-release thing.
You might want to check out archiso [1], the install scripts [2], and one of my sample archiso configurations [3] that effectively creates an install CD. Now, keep in mind that archiso isn't the *current* way installers are created, but I think it's much more straightforward to work with than what we're using right now. That said, we currently use archboot to create the CDs, so that may be worth taking a look at as well. There is also a really old installer remastering wiki article [4], though not terribly relevant, you could still use a similar technique to pull apart one of our recent install iso's and remaster it with whatever packages you want. Anyhow, if you'd like help with this, I'd be more than happy to give you a hand (I need some more test-cases for archiso...), or if you look at it and go "gee, this is dumb", don't be afraid to send patches. Just get in touch with me through email, jabber, irc, or whatever.
Good luck
[1] http://projects.archlinux.org/git/?p=ar … a=summary)
[2] http://projects.archlinux.org/git/?p=in … ;a=summary
[3] http://code.neotuli.net/gitweb/?p=archi … stall-conf
[4] http://wiki.archlinux.org/index.php/Rem … nstall_ISO

Debtap - A script to convert .deb packages to Arch Linux packages

I wrote this script in my free time to help people who, for any reason, want to convert a .deb to an Arch Linux package. It works in a similar way with alien (which converts .deb packages to .rpm packages and vice versa), but, unlike alien, it is focused on accuracy of conversion, trying to translate Debian/Ubuntu packages names to the correct Arch Linux packages names and store them in the dependencies fields of the .PKGINFO metadata in the final package. In other words, it won't only create an Arch package with the data of the original .deb package, but also it will try to create a valid and as accurate as possible .PKGINFO metadata file in the converted package. It uses pkgfile and pacman utilities to achieve this accuracy. The final package can be installed like any local Arch Linux package. Debtap is now available on AUR!
FAQ
Q: What "debtap" stands for?
A: DEB To Arch (Linux) Package
Q: Isn't better to download an official package or write a PKGBUILD in case I need to compile a package or convert a .deb package to an Arch Linux package?
A: Sure it is, and I truely encourage you to do so. Debtap was written to create packages that either cannot be compiled (closed source packages) or cannot be built from AUR for various reasons (error during compiling or unavailable files), as a quick 'n' dirty solution and an extra option for creating Arch Linux packages for Arch Linux users.
Q: So debtap will help me only in case I need to convert specific .deb packages to Arch Linux packages?
A: No. In case you need to write a new PKGBUILD for a package that already exists in the Debian/Ubuntu distributions, by converting its .deb package to Arch package with debtap, thanks to the packages names translator function inside the script, it can help you determine which dependencies are needed for the package you write the PKGBUILD for and complete the necessary fields.
Q: What are the minimum requirements to run this script?
A: You need to have installed these dependencies: bash, binutils (provides ar utility for extracting .deb package), pkgfile, and fakeroot. You must run at least once (preferably recently) "debtap -u" to create/update pkgfile and debtap database (you do this with root privileges).
Q: Debtap needs a lot of time to convert a package. So, why this is happening?
A: Like I said, debtap is focused on accuracy. It won't just unpack a .deb package and then repackage its data to an Arch Linux package, ignoring metadata. Depending on the speed of your processor and the package itself, conversion can take from a few seconds to several minutes.
Q: During conversion I get several warning messages, why?
A: Debtap cannot be 100% accurate for several reasons, the main reason for this is the complexity of packages names. If you want to check the freshly generated .PKGINFO and .INSTALL (this is optional file) metadata files or even fix the untranslated packages names inside .PKGINFO, debtap offers you the option to edit these files before compressing the final package.
Q: How do I use debtap?
A: The syntax is quite simple actually: debtap [option] package_filename
For example: debtap world-of-goo-demo_1.0_i386.deb
Any recommendations or questions for debtap are welcomed!
Last edited by helix (2015-05-21 22:54:17)

Hi helix. I've had trouble trying to use your script with ubuntu software from The Open University
debtap OpenUniversity-ubuntu-0.1.3.20130104.deb
==> Extracting package data...
==> Fixing possible directories structure differencies...
==> Generating .PKGINFO file...
debtap OpenUniversity-ubuntu-0.1.3.20130104.deb
==> Extracting package data...
==> Fixing possible directories structure differencies...
==> Generating .PKGINFO file...
:: Enter Packager name:
NewPepper2013
:: Enter package license (you can enter multiple licenses comma seperated):
closed
:: If you want to edit .PKGINFO file, press (1) For vi (2) For nano (3) For a cu stom editor or any other key to continue:
==> Generating .MTREE file...
==> Creating final package...
xz: unrecognized option '--1-any.pkg.tar'
xz: Try `xz --help' for more information.
mv: cannot stat â*.xzâ: No such file or directory
==> Removing leftover files...
==> Package successfully created!
The software is called NewPepper 2013 but i've not been able to find it online except on the ou website.

Kernel do not meet the minimum requirements

Hello,
I am installing Oracle AS Infrastructure.
My overall system checkup was fine but of kernel has following message.
checking for hardnofiles = 65536 found hardnofiles = 1024 Failed
checking for softnofiles = 4096; softnofiles = 1024
Problem:
The security parameters in the kernel do not meet the minimum requirements.
Recommendation: Perform OS System specific instruction to update kernel parameter, namely BIT_SIZE and NON_EXEC_USER_STACK.
After that I have checked /etc/security/limits.conf file values were correct.
But my /proc/sys/net/ipv4/ip_local_port_range
values were 1024 65000 --
they are correct in sysctl.conf file
But any way I have fixed that.
Also /pro/sys/kernel/shmni was 1000, so I make it 4096
Actually in the start of setting up requirements,
I have tried to make changes of kernel through /proc/sys/.....
But after that I have created sysctl.conf file and put all recommended values and restart the system.
So I continue installation.
Is it ok?
Regards,
DN

its has been done.
see: Article-ID: Note 300819.1

Security parameters in the kernel do not meet the minimum requirements

Hello,
I am installing Oracle AS Infrastructure.
My overall system checkup was fine but of kernel has following message.
checking for hardnofiles = 65536 found hardnofiles = 1024 Failed
checking for softnofiles = 4096; softnofiles = 1024
Problem:
The security parameters in the kernel do not meet the minimum requirements.
Recommendation: Perform OS System specific instruction to update kernel parameter, namely BIT_SIZE and NON_EXEC_USER_STACK.
After that I have checked /etc/security/limits.conf file values were correct.
But my /proc/sys/net/ipv4/ip_local_port_range
values were 1024 65000 --
they are correct in sysctl.conf file
But any way I have fixed that.
Also /pro/sys/kernel/shmni was 1000, so I make it 4096
Actually in the start of setting up requirements,
I have tried to make changes of kernel through /proc/sys/.....
But after that I have created sysctl.conf file and put all recommended values and restart the system.
So I continue installation.
Is it ok?
Regards,
DN

I have changed to
/etc/security/limits.conf:
* hard nofile 65536 --- I removed this line also
* soft nproc 2047
* hard nproc 16384
* soft nofile 16384
* hard nofile 65536
after that I got the values as below
ulimit -Hn
1024ulimit -Sn
1024I run ulimit -u 1384 -n 65536
ulimit -Hn
65536ulimit -Sn
65536I put the values back and reboot system.
* hard nofile 65536
* soft nproc 2047
* hard nproc 16384
* soft nofile 2048
* hard nofile 65536
Right away from the terminal, its give me values again
ulimit -Hn
1024ulimit -Sn
1024But after some time remotely (SSH) I have checked
abc:~ # ulimit -Hn
65536
abc:~ # ulimit -Sn
2048
dhsappserver1:~ #
DN

Arch Linux MailServer, Point the Way, Please

Hi guys,
Hope you still remember me, long time no write,
I have been using Arch Linux as a Desktop for years, but have never played much with using it as a server. Now I have my own company and so since I work in the Technology area who better to make the servers for my company than I?
Here is the thing, I have already an Arch Linux WebServer running, and I want to have a MailServer too running on the same machine, just because I have always wanted to, and because the SSL certification I'm trying to get requires an @mydomain.com email for it to be the approver of the SSL, thats why I need to do this. I have two options:
This wiki entry, for Postfix or this entry of a simple mail server
Guys, since I'm new to this, can you point the way that I should follow?
-Thanks in advance,

They both look pretty similar... For a 'simple' / 'traditional' mail server, you can't go wrong with Postfix and friends. I have been running an Arch-based mail server for a couple of years now (hosted @Linode) using Postfix (PostgreSQL Virtual Users) and Dovecot. SQLGrey is pretty much the only anti-spam I have on it and we get very few spam across the 30 or so domains the server handles.
OTOH, if this is just for the SSL Certificate stuff, why not Google Apps (or similar) the domain? https://www.google.com/a/cpanel/standard/new3

Arch Linux minimum requirements and recommended?

Similar Messages

Maybe you are looking for