Arch Linux Pens on sale

I see the mod team is cracking down harder than ever on spammers these days. I do hope I am exempt! ;-)
Arch Linux pens are on sale for $1 off for the remainder of September and all of October. They are $5 regular price, currently $4, with hefty discounts if you buy multiples. I've also reduced the shipping rates for multiple orders.
I have a lot of pens in stock, and they haven't been selling overly well, so I thought I'd try to move a few of them.
http://schwag.archlinux.ca/product/pen/
Dusty
Last edited by Dusty (2010-09-15 00:29:55)

Dusty wrote:
I don't know much about pen refills, but I took the pen apart and compared it to the refill from one of crouse's pens; the refills are the same (in fact, I was able to interchange them). So if madeye is correct about the old refills being used in parker pens, this is the same model of refill.
I'm sorry about the site being down all weekend; I didn't have enough power or Internet to get it back up.
Dusty
Oh, cool. If it's the same refill, then it's just a matter of time before I get a space pen refill in...
Last edited by iphitus (2010-01-27 11:25:22)

Similar Messages

Arch Linux Pens

I had some pens made in Sky Blue, with
Arch Linux
A simple, lightweight Linux distribution
http://archlinux.org
Laser engraved on the barrels.
You can order them while they last @ http://archlinux.us
$5 each. Only 100 available. ----- now only 90.
$7 each for international shipping. (if some outrageous shipping occurs, I am going to reserve the right to adjust shipping -- but from what I can tell, this should cover almost everywhere I've looked in Europe)
$1 from each pen sold will be donated to ArchLinux.org
These are very nice pens, heavy. Just thought I'd share for those interested.
EDIT: Had a conversation with Dusty, and after some consideration I don't really mind shipping outside the usa .
So, I guess I can ship to outside the US if :
[b]on international shipping
1. people pay the shipping AND insurance (if they want it insured)
unless I am missing something on the simplicity of mailing internationally ... it's never been simple/or cheap when I've done it before.
2nd edit:
ok........it DOES appear it's easier than I thought....... no paperwork for it if it's under $400 and under 16 oz.
also appears to me that shipping is approx $2 - $3 to ship to europe..at least the locations i've checked so far. Alaska and Hawaii appear to be the same rates for letters as everywhere else in the usa..... so far as I can tell so far.
Last edited by crouse (2009-03-31 04:37:49)

whoops wrote:
Somehow it hurts me to look at that money ratio... Can't you make them +1$ = double the donation?
Or are more people here that would rather...
(a) not gladly buy the pen they want for 1$ more
...than...
(b) decide to search for a paypal donation button to just send the 1$ and get a pen made themselves, then not find a paypal button, post some confusing comment before remembering that they don't use pens anyway and how much work's to be done and spontaneous go wandering off without even ending the
ROFLMAO ...
If you don't want a pen, support your favorite distro and make a friggin donation HERE >>> http://www.archlinux.org/donate/
That way ALL of your money goes to help support Arch Linux.

New Arch Linux Schwag offerings: Speakers and Notepaper

It's been a while since anything exciting has happened in the Arch Linux Schwag shops. Laptop stickers seem to be the most popular offering. I'm having trouble getting rid of Arch Linux Pens so they've been discounted to below cost.
New today are a couple offerings in the Arch Linux Zazzle Schwag store:
Arch Linux Speakers
Arch Linux note paper
Hope you enjoy the new schwag!
Dusty

Runiq wrote:Cool stuff. Like the coasters, and the allanbrokeit shirt is stylish.
That's Acecero's contribution, as he implies. :-)
Also, there's a typo in the handbook's headline: "A simple lightweight Linuk handbook."
Yeah, I know... sadly, I didn't notice it until it was too late to change (the book was set up for publication). Now I have to wait for a new edition, or pay $40 to put one out now.
Acecero wrote:Just curious, are you going to release different editions of the Arch Linux Handbook from time to time? I'm assuming the information would need to be updated and the more marketability you will gain anyway.
I'm hoping to sell between 10 and 50 copies of this edition to pay for the upfront costs before making a new edition. The more popular it is, the more likely I will be to keep it up to date.
BTW, if anyone is interested in doing cover art for the second edition, get in touch with me. I've been told that this cover looks like ass (it was gently, with links to tutorials on design :-D)
Dusty

Pen drive usb transcend crazy over arch linux

The model in question is a pen drive 4Gb Transcend JetFlash V33 that when I enter the port usb notebook with arch Linux not mount automatically (which have done all pen drive I used up to now, friends, colleagues, etc. ...). With gparted (from arch linux) tells me that the pen drive has a space-512mb (unless, that is negative) and space is not allocated (not formatted). Impossible mount from terminal, I type a message from the beginning that the size of the device can not be found after its end (and we believe with a capacity of -512). I gave the pen drive to a friend with windows Xp, where it is regularly recognized (4 gb, FAT 32). Even with the live CD systemrescueCD is regularly recognized and I move into pen a text file above (to test) after mounted it using the terminal. The text file was also seen in windows Xp. I didn't experiment with other Linux distributions. Someone knows that cabbage can be. Sorry for my bad english. Thank you.

It is definitely able to recognize the USB and DVDs as separate drives; it gives the option of booting from USB, and it gives the memory capacity of the USB drive I used as a live USB, and the memory used for the live CD. But when it comes time to actually boot, something is going wrong.
I would suspect it is a problem with the BIOS, if not for the fact that I had a similar issue on my previous system, which used a completely different motherboard. If it is the same issue, it would either have to be a problem with the DVD drive (although I don't know why it would be against loading some live CDs but not others) or perhaps the way I created the live CDs. Although, again, I don't understand why the Linux Mint 32-bit DVD would work fine, while both 64-bit DVDs would not.
I will try using a different DVD drive to boot the DVDs, and if that does not work, I'll try creating a new Arch live CD to see if I can resolve the issue. But if anyone has any ideas, it would still be greatly appreciated.

Make bootable arch linux iso of installed system

I have installed Arch Linux in virtual box, with "Awesome" window manager and only required applications with it.
I want to make a bootable iso of this system, which i can carry around with me in pendrive and install in other system.Also, can i make a live usb from it?
Is it possible? If so, please specify the detailed steps. I am a newbie and have been using linux for 2-3 months only. Or, please give the link for the same.
Thanks

Thanks for the reply ewaller.
>Well, not quite. But, this is a VM. I assume you want to treat this as an appliance that you can copy to another host that has VirtualBox on it. All you need to do is copy >the *.vbox file that defines your VM (it is an xml file). It is about 10 to 20 kbytes in size. You also need to copy the file that defines the guests "disk". That is (usually) a *.vdi file. > Those can be tens or hundreds of gigabytes.
>If you actually ran from the pen drive, you could carry that drive from host to host. If you make a change in the machine while running on one host, thrn shut doen the >VM, and then move to another host, then those changes will follow you.
>If you are just looking to copy the VM to many places; after which the various copies can diverge from each other, you can just export the appliance to a *.ovf or a *.ova file on > one machine, then import that file on the next host.
In above case, i would only be able to transfer between the virtual machine and that will be restricting.
I did some research and found following thread which is similar to my problem,
http://askubuntu.com/questions/119718/h … d-remaster
but one of the two solution provided here only works on ubuntu(i.e relinux),which was suitable to me and the other one,ie clonezilla to make iso, i haven't tried, but it doesn't do what i want.
Relink does exactly what i want but doesn't work on arch linux.It is a fork of remastersys which is dicontinued and only worked for ubuntu and its related.
I also found this http://null-byte.wonderhowto.com/how-to … o-0131002/
but haven't tried it yet.Also it require to redo all the steps that i have currently done, so i want an alternative.
I also found a simple way, but it is essentially just backuping and restoring and require base install.
https://bbs.archlinux.org/viewtopic.php?id=44805
Atlast, i got this http://systeminstaller.sourceforge.net/
but there is no description if it will work with arch linux or not.
I want something like above mentioned and i have no further ideas and searched everywhere, if anyone has any ideas, please suggest something.
Thanks in advance.

Should "Arch Linux" also include architectures beyond x86?

I've realized that there are separate community projects for ports of Arch to different architectures, e.g. Arch Linux ARM. Different cpu architectures are clearly becoming more and more important in the current world of technology. Would it not be logical to merge these all under "Arch Linux" as a whole? I feel that this would contribute to Arch's core value of simplicity.
Additionally, I feel like a port for Arch would be needed for the upcoming Parallela board, which I think will be very popular.
What's your take on it?

The problem behind supporting a broad range of architectures is an obvious one: You need people to do the work. Gentoo excels at supporting many machine archs because it's a souce-based distribution. Hence, the work that Arch; devs do to give us repositories of binary packages are, in the case of Gentoo, off-loaded to the users. Anyone who wants to install Arch on, say, SPARC or PowerPC can probably do so, if they're willing to manually tweak the builds. Not sure why one would want to do so with Arch, though.
Mindstormcreator wrote:Different cpu architectures are clearly becoming more and more important in the current world of technology.
Disregarding ARM, what are these different architectures? All PCs use x86 these days, as do servers, the next generation of gaming consoles, most HTPCs...
OT:
Paralella Kickstarter Page wrote:
Q: Why do you call the Parallella a supercomputer?
The Parallella project is not a board, it's intended to be a long term computing project and community dedicated to advancing parallel computing. The current $99 board aren't considered supercomputers by 2012 standards, but a cluster of 10 Parallella boards would have been considered a supercomputer 10 years ago...
That's one hell of a bad sales pitch.

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

[GUIDE] How to get MapleStory working in Arch Linux

MapleStory is a free-of-charge, 2D, side-scrolling massively multiplayer online role-playing game developed by the South Korean company Wizet. Several versions of the game are available for specific countries or regions, and each is published by various companies such as Wizet and Nexon. Although playing the game is free, character appearances and gameplay enhancements can be purchased from the "Cash Shop" using real money. MapleStory has a combined total of over 50 million subscriber accounts in all of its versions. MapleStory North America (Global), for players mainly in North America and outside of East Asia, Southeast Asia and Europe, has over three million players.
In the game, players travel the "Maple World", defeating monsters and developing their characters' skills and abilities as is typical in role-playing games. Players can interact with others in many ways, such as through chatting, trading, and playing minigames. Groups of players can band together in parties to hunt monsters and share the rewards. Players can also join a guild to interact more easily with each other.
I am an avid mapler myself, however, I am also an avid archer! For some time, I have wanted to get MapleStory working on Arch Linux in some way, but nothing seemed to work. As you might have guessed by now, recently, while playing around with VirtualBox, I discovered a method to get MapleStory working on it! Though in this method you won't actually have MapleStory running on Arch Linux, you'll have it running on a VirtualBox Windows virtual machine, that is still pretty good compared to other people's experiences.
I hope there are at least a few maplers on this forum, and if there aren't, I hope that someone will port this post over to other Linux, or even MapleStory, forums. Anyways, let's begin.
1. Download and install a version of Virtual Box that is version 3.0+. The reason for this is that, only versions 3.0+ support an experimental DirectX Driver with 3D acceleration that is required for MapleStory to run.
2. Create a Windows Virtual Machine, add a hard disk to it, and install and update Windows on it(preferably Windows XP, as it uses less resources than other contemporary Windows installations).
3. Once you have done all you needed and wanted on that Windows installation, restart it, boot it into safe mode by holding F8 at the boot, and wait until the desktop is fully loaded.
4. After you are at the desktop, go to "Devices" at the top of the menu of the Windows virtual machine, and select "Install Guest Additions...". Wait until Guest Additions finishes installing, and when VirtualBox asks you if you want to mount the disk containing the Guest Additions on the virtual machine, say "Yes".
5. Run the main executable on the disk that doesn't have amd64 or x86 following its name. Follow the instructions it gives you, and when it asks you what components to install, make sure both of the boxes it shows you are checked.
6. After the install is completed, the virtual machine will restart. After it restarts, shut it down.
7. Congratulations! You now have DirectX installed on your VirtualBox virtual machine! Now you need to activate the "3D Acceleration", that enables it.
8. In the VirtualBox main window, make sure you have your machine with Windows selected. Then, click on "Machine", and then "Settings...", at the top. A new window should pop up. On the left hand side, click on the display panel, and in the new settings section, tick Enable 3D Acceleration. Click "OK", to save the settings.
9. Start your Windows virtual machine, install MapleStory just as you would on a normal windows computer, and run MapleStory.
Notes: This way of running MapleStory is slower than by running it normally, on a normal windows computer. Also, try to not interact with your Linux desktop while playing MapleStory, because this can cause HackShield to shut down MapleStory, due to the fact that it believes there is a hacking attempt.
If any of you port this guide to any other place on the web, please, credit me, neovaysburd5.
For any further questions or inquiries, this goes to all of you, please contact me at [email protected].
Last edited by neovaysburd5 (2009-08-19 16:51:31)

Alright, I've posted it in the wiki. I don't know if it meets the Arch Linux wiki standards, so if there is absolutely anything wrong with it, please fix it right away. Don't even ask my permission.
http://wiki.archlinux.org/index.php/MapleStory

[solved] Arch linux access point with multiple interfaces for the NAT

Hi, I have a router running Arch linux. It is connected via LAN (let's call it eth0) to the internet. It has a second LAN interface, eth1, and a wireless interface in master mode, wlan0.
Now, Everything works perfectly except providing network connectivity on eth1 and wlan0 simultaneously. I followed the guide in the "Internet share" wiki article and use dnsmasq/hostapd for the AP. It appears as if all traffic from the router is sent to the wlan0 interface, even if it came in through eth1 (for example, dhcp requests). I cannot really find information how to solve this. The words "bonding" and "iptables" are floating around, but there is not really an easy to understand tutorial for this.
What do I need to do to use both the eth1 and wlan0 interface (for different clients!) on my router?
Best regards, and thank you in advance
Jan Oliver
/e: This seems to be my problem: http://www.novell.com/support/kb/doc.php?id=7000318 How do I solve this using the usual iptables? (The way described in the article doesn't work: "RTNETLINK answers: No such process" errors.)
Last edited by janoliver (2013-09-25 22:24:53)

Or you could bridge eth1 and wlan0, and make dnsmasq bind/listen on that bridge...

[SOLVED] (U)EFI dualboot Win7 Arch Linux - partitions gone - recovery?

Hi everybody,
I have a slight problem with my (U)EFI dualboot system (Windows 7 and Arch Linux) which used to be configured using rEFInd like it is described in my previous post:
https://bbs.archlinux.org/viewtopic.php … 6#p1300356
<EFI PARTITION> is /dev/sda1 and I used to boot via <EFI PARTITION>\EFI\Boot\Bootx64.efi which then successfully either loaded Windows or Linux kernel.
Thanks to my own stupidity and a recent update of refind I decided to copy the new driver, font and icon folders to the <EFI PARTITION> in order to be up-to-date.
After doing so, the rEFInd boot menu had a third icon which said "Boot via \EFI\Boot\Bootx64.efi" and if I clicked on it a second rEFInd boot menu appeared with only the two icons for Windows 7 and Arch.
So I figured I could delete Bootx64.efi and ultimately did so, unfortunately. Afterwards I couldn't boot neither Windows nor Linux anymore.
Following this I went through my noumerous USB boot sticks in order to be able to recover the Bootx64.efi. Unfortunately the first USB stick was a Windows XP one which has the plop bootloader alongside:
http://www.plop.at/en/bootmanager/thebootmanager.html
Out of couriousity I entered this bootloader and found HDA and HDB (I assume resembling my SSD and my USB stick).
To my knowledge I didn't change anything but after entering the bootloader again I just found HDA left, HDB seemed to be gone. But I didn't think of anything bad happening yet.
Then I found a working Archiso which I booted and using blkid I couldn't find the partitions of my earlier system anymore, only its device and the USB stick:
/dev/sda: PTUUID="..." PTTYPE="gpt"
/dev/sdb1: UUID="..." LABEL="ARCH_201312" TYPE="..." and so on
/dev/sdb2: SEC_TYPE="msdos" and so on
Even within the EFI shell I could not detect any internal drive anymore (only fs0: which is the USB stick)
Using Archiso onboard tool testdisk I could find the old partitions. The correct result of the GPT from testdisk is:
Fri Jul 4 08:45:25 2014
Command line: TestDisk
TestDisk 6.14, Data Recovery Utility, July 2013
Christophe GRENIER <[email protected]>
http://www.cgsecurity.org
OS: Linux, kernel 3.12.1-3-ARCH (#1 SMP PREEMPT Tue Nov 26 11:17:02 CET 2013) x86_64
Compiler: GCC 4.8
Compilation date: 2013-08-06T08:42:31
ext2fs lib: 1.42.8, ntfs lib: libntfs-3g, reiserfs lib: 0.3.0.5, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size 500118192 sectors
/dev/sda: user_max 500118192 sectors
/dev/sda: native_max 500118192 sectors
/dev/sda: dco 500118192 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 1 sectors, sector size=512
Hard disk list
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63, sector size=512 - Samsung SSD 840 PRO Series, S/N:S12RNEAD322171L, FW:DXM04B0Q
Disk /dev/sdb - 2013 MB / 1920 MiB - CHS 1022 62 62, sector size=512 - SMI USB DISK, FW:1100
Disk /dev/sdc - 4210 MB / 4015 MiB - CHS 1020 130 62, sector size=512 - Generic Flash Disk, FW:8.07
Disk /dev/mapper/arch_root-image - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Disk /dev/dm-0 - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Partition table type (auto): Intel
Disk /dev/sda - 256 GB / 238 GiB - Samsung SSD 840 PRO Series
Partition table type: EFI GPT
New options :
Dump : No
Align partition: Yes
Expert mode : Yes
Analyse Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
hdr_size=92
hdr_lba_self=1
hdr_lba_alt=500118191 (expected 500118191)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=2
hdr_entries=128
hdr_entsz=128
hdr_size=92
hdr_lba_self=500118191
hdr_lba_alt=1 (expected 1)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=500118159
hdr_entries=128
hdr_entsz=128
Trying alternate GPT
Current partition structure:
Trying alternate GPT
search_part()
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
FAT32 at 0/32/33
FAT1 : 4110-6150
FAT2 : 6151-8191
start_rootdir : 8192 root cluster : 2
Data : 8192-2097151
sectors : 2097152
cluster_size : 8
no_of_cluster : 261120 (2 - 261121)
fat_length 2041 calculated 2041
set_FAT_info: name from BS used
FAT32 at 0/32/33
MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=1209008128, part_size=127792054272, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
recover_EXT2: s_block_group_nr=0/160, s_mnt_count=1318/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 5242880
recover_EXT2: part_size 41943040
MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
recover_EXT2: s_block_group_nr=0/80, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 2621440
recover_EXT2: part_size 20971520
MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
recover_EXT2: s_block_group_nr=0/706, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 23156049
recover_EXT2: part_size 185248392
MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Results
P MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
P MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
P MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
P MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
P MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
interface_write()
1 P MS Data 2048 2099199 2097152 [NO NAME]
2 P MS Data 2361344 251955199 249593856
3 P MS Data 251955200 293898239 41943040
4 P MS Data 293898240 314869759 20971520
5 P MS Data 314869760 500118151 185248392
simulate write!
TestDisk exited normally.
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Now the question is: Can I - using testdisk or any other tool - recover those partitions successfully so I will be able to boot again afterwards? I tested and I could mark them as:
P Primary
Any help will be greately appreciated.
Best regards
Last edited by blablubb1234 (2014-07-08 09:20:08)

Issue resolved If you care to know how, read on:
Looking at the disk using gdisk was doing no good. Neither of the recovery options in gdisk did the trick.
I then returned to testdisk and restored the partitions (successfully). However, afterwards I was greeted by shell telling me the root device was not found (seems like UUIDs get changed when one restores them using testdisk). Adjusting the PARTUUID for root in <EFI SYSTEM PARTIITION>/boot/refind_linux.conf did the trick and I could boot up Archlinux again.
Windows 7 still didn't boot telling me the required device was inaccessible (probably wrong UUID, too). I could however not restore/edit Windows' BCD using bcdedit, see my post Status: 0xc0000225 boot selection failed; required device inaccessible:
To make a long story short: Removing bcd and running autorecovery from withing Windows RE successfully created a new bcd. Unfortunately, Windows writes its backup bootloader at <EFI SYSTEM PARTITION>/boot/EFI/Boot/bootx64.efi. This file originally was a copy of refind_x64.efi which I need to put at that location to be able to dualboot. After chrooting to my Arch system I could restore bootx64.efi, create a new fstab and everything is running fine now again.
Best regards and thanks for the help.

Installing Multiple Operating Systems with grub and Arch Linux

NOTE: Please keep in mind that there are many different ways to achieve this same result using various loop and ramdisk methods, read this with a separate window to jot down your comments and suggestions... this is ongoing for me so any help would be appreciated!
Read the full article at Install Multiple Os without cds
This is my first post and I plan on making this topic an official HOWTO with www.tldp.org.
I have been into the computer security scene since 1990, but I realized that I had very little experience with the various LInux, Unix, and alternative Operating systems out there.
I have a CD-RW drive but being a struggling computer security researcher I had no money for blank cd-recordables. What follows is how I managed to install various operating systems on my computer (1 hard drive) without having to burn to a CD the ISO and then boot from that.
I first partitioned my 120GB harddrive into 10 partitions, the 2nd partition is a small swap and the last partition is extra large because it holds all the ISO images..
I then wrote a small shell script to automatically download (I love wget!) the following.
OpenBSD
IpCOP
Libranet
Arch-Linux
Fire
Local Area Security
Packet Master
Devil-Linux
FreeBSD
Knoppix
Helix
Gentoo
Yoper-Linux
NetBSD
RedHat
Slackware
The script also downloaded Installation manuals and md5 checksums.. (let me know if I should post... its pretty unsophisticated
I installed Slackware (personal favorite) on hda1 using my last blank CD-R, note that I do not have a separate boot partitino. (Should I?). I also installed grub on the MBR. I love grub, if you read through the man pages and all info you can find about grub, you can learn a whole lot. Grub has much more features and capability than lilo, even though lilo comes installed by default with slack.
I organize my kernel situation as follows... In my /boot directory, I mkdir KERNEL, CONFIG, MAP, INITRD and that is a good way for me to keep my kernels and everything organized.. Another good way is a separate dir for each new kernel.
Since Arch-Linux is a solid distro, I'll use that as a first example.
Here is the Arch-Linux section of my shell script
goge Arch-Linux
$w http://puzzle.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.iso
$w http://unc.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.md5sum
$w http://www.archlinux.org/docs/en/guide/install/arch-install-guide.html
md55
cat arch-0.6.md5sum
md5sum arch-0.6.iso
md55
The first thing to do is to mount the downloaded ISO image so we can use it as if it were an actual CD.
mount -t iso9660 -o ro,loop=/dev/loop0 cdimage /mnt/cdrom
Where cdimage= the ISO image. EX. /usr/local/src/ISO/Linux/Arch-Linux/arch-0.6.iso
This mounts the iso as /mnt/cdrom.
Next you need to copy /mnt/cdrom to a separate partition for the booting process. So mkfs.ext2 /dev/hda9. ( I prefer reiserfs or even XFS to ext but if you use something other than ext2 you could run into some problems because some of the installation kernels and initrds don't include support for reiserfs and so can't recognize the files. Although you could use mkinitrd to create a new initrd with reiserfs support, that might be pushin it IMO... I use the 9th partition consistently for this. I know there is a "right" way to copy the /mnt/cdrom files so everything stays the way it is supposed too, using tar or cpio, but I'm lazy so I just do cp -rp.
(What is the tar or cpio commands to copy with correct permissions etc??)
So you mount the 9th partition as whatever, say /mnt/hd and then copy the files. Now what?
Now edit your /boot/grub/menu.lst file to include the specific options to boot arch-linux installation.
A good idea is to find the isolinux.cfg file somewhere on the distro cd, this will tell you what to include in the menu.lst.
Here is the section in my menu.lst
title Arch Install
root (hd0,8)
kernel /isolinux/vmlinuz load_ramdisk=1 prompt_ramdisk=0 root=/dev/rd/0
initrd=/isolinux/initrd.img
This should be self-explanatory. The root (hd0,8) is pointing to partition 9. So the rest of the commands start from partition 9.
When you experience problems, remember you can always edit the grub boot options by typing 'e' and then edit the section. Also, a good idea is to include several variations in your menu.lst so you can easily try other ways to boot efficiently. And, remember to read up on all the installation guides that come with your distro, specifically, hard-disk installs.
There are special cases, Gentoo, has a semi-new compressed filesystem called squashfs. BTW, this is AWESOME, so check it out. It has to be compiled into the kernel, so some work is in order, but use this recompile to optimize your kernel. You can get the squashfs patch for almost any kernel. I use the latest stable 2.6 kernel. Squashfs is incredible and although I don't think you need it to install from ISO, you do need it to expand the livecd.squashfs filesystem that comes with the cd.
Heres a sample Gentoo section from my menu.lst
title Gentoo Install
root (hd0,8)
kernel /isolinux/gentoo root=/dev/ram0
initrd=/isolinux/gentoo.igz init=/linuxrc acpi=off looptype=squashfs loop=/livecd.squashfs cdroot vga=791 splash=silent
A nother' tip is the shell that is provided if you experience problems, typically busybox or ash. The key tools to get you going from here is mount and chroot. Sometimes you will need to manually create a simulated file system and then chroot into it. For instance, you might have to create boot, etc, bin, directories on the target partition.
I generally install each OS onto the next partition (careful of the logical partition) and add it to my menu.lst after install. A good idea is after installation, copy the kernel and initrd(if there is one) to the slackware(or whatever) boot partition on hda1. I copy kernels to /boot/KERNEL/ and initrd's to /boot/INITRD, then menu.lst is more organized...
You then need to add an updated section to your menu.lst (just comment out the install section for later)
Here is the finished arch-linux section from menu.lst
title Arch Linux 6
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/hdc3
This doesn't use my convenient boot/KERNEL/vmlinuz26 as you can tell by setting the root to partition 3.
***NOTE: Make a backup of MBR using dd and save to floppy, also backup the partition table to floppy, using cfdisk or parted. And boot disks (I use 1 with grub, and 1 with slack, and tomsbootdisk) will invariably come in handy. Tomsbootdisk is recommended, and make the grub boot disk when you install grub. install to floppy.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The final result after some fun experimenting, is when I boot, I have a cool grub boot screen come up with the option to boot into whatever OS I want, this is handy for multiple reasons. One good thing to do after this is to port scan and vuln scan each OS, after you update of course. Write this stuff down and you will know the weaknesses/strengths of the various OS's.
I can boot a custom Firewall, snort, or multiple honeypots using this procedure, as well as a graphical kde environment with a kernel optimized for graphics and my processor/architecture, or an environment devoted to forensics or even an environment suitable for programming.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
P.S. Some of the cooler alternative operating systems are BeOS 5, EOS, ER_OS, V2_OS, and my personal favorite Menuet. Menuet is 100% assembly graphical operating system that fits on a floppy. Its f'in money!
This should be a good enough example to get you started, this kind of thing should be learned and not just copied... Knowing how to do this stuff could prove to be exceptionally useful...

Start by reading all the articles built-in on your Mac - Help > Mac Help, search "printer sharing."
http://desk.stinkpot.org:8080/tricks/index.php/2008/04/how-to-print-to-a-cups-se rver-from-mac-os-x/
http://www.macosxhints.com/article.php?story=20080324224027152&query=share%2Bpri nter
http://members.cox.net/18james/osxprintersharing.html
http://ubuntuforums.org/archive/index.php/t-56940.html

[SOLVED]System Hang in Arch Linux

I have tried distributions like ubuntu and fedora in hope for finding a stable system . So I move on to Arch Linux
But this problem also exist on Arch. While using my Arch Linux (including ubuntu and fedora) my system hangs with a black screen with something written on the whole screen which cannot be pasted here as my system hangs and I have to push power button to restart.
So I check my errors.log file and found these errors
Jul 8 22:59:24 localhost kernel: [ 1.680013] ata3: softreset failed (device not ready)
Jul 8 22:59:24 localhost kernel: [ 7.298612] SP5100 TCO timer: mmio address 0xfec000f0 already in use
Jul 8 22:59:31 localhost kdm_greet[792]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
I have a HCL K21 pdc notebook
Note: In Ubuntu my notebook start with ata1: softreset failed error at boot time
Most often this error occur while watching videos or listening music with VLC
Last edited by Manuj19 (2011-07-09 10:13:24)

ewaller wrote:It might be better to just post the output of lspci -nn It will tell us a great deal more about the hardware related to the PCI bus, including specific chip set identifiers.
Thanks for suggestion
Here is output of lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
08:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
08:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
08:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
08:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Last edited by Manuj19 (2011-07-09 07:20:08)

Arch linux resolution

Hello,
Im having a problem with resolution at arch linux. I can't put anything else than 800x600 or 640x480. I installed ati drivers and I still have the same problem.
Here is the output of xrandr
[root@myhost ~]# xrandr
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 61.0*
640x480 60.0
I tried to edit xorg.conf and I edited it like this but it didn't help
ection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc" BoardName "RV730 PRO [Radeon HD 4650]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I want to use 1280x1024 resolution, my graphic card and monitor should support it since I'm using this resolution on windows XP(dual boot)
Don't link me to wiki because I already searched it and tried everything provided there but it didn't help.
THANKS

Hmm... here is my xorg.conf that just works...
$ cat /etc/X11/xorg.conf
Section "ServerFlags"
Option "DontZap" "off"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "record"
# Load "dri2"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "SyncMaster T220"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 8400 GS"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Option "AddARGBGLXVisuals" "True"
Depth 24
EndSubSection
EndSection

[SOLVED] Using a NETGEAR WN111v2 USB network adapter with Arch Linux

Hello!
I just recently bought the adapter mentioned in the subject, and hoped to get it working with my lovely Arch Linux OS. (I had read somewhere online that it should work some way or another; ndiswrapper or a kernel driver). However, I've yet to get it working. I tried the tips I found:
Here:http://ubuntuforums.org/showthread.php? … ht=WN111v2
which links to here: http://ubuntuforums.org/showthread.php?t=885520
Basically, it tells me that I should use ndiswrapper with the arusb_xp drivers provided by NETGEAR. So I place the three files arusb_xp.inf, arusb_xp.sys and arusb_xp.cab in a folder, and run:
sudo ndiswrapper -i arusb_xp.inf
ndiswrapper -l
arusb_xp : driver installed
device (0846:9001) present
sudo ndiswrapper -m
sudo modprobe ndiswrapper
This should install my drivers, add an alias in modprobe.d/ndiswrapper saying "alias wlan0 ndiswrapper" and load ndiswrapper in itself... right?
But after a iwconfig I can still see only eth0 and lo, no wireless interfaces at all. I checked lsmod, but couldn't find any conflicting drivers loaded.
Anybody got an idea why it worked for the people with Ubuntu and not me? Any and all help greatly appreciated!
Cheers
EDIT: For some magical reason, the drivers that came with my adapter did NOT work, while the drivers on the second link, named the same, DID. I have not inspected how they differ, but luckily, they work. Yey!
Last edited by mariusmeyer (2009-05-07 08:52:21)

i have the same computer and the same os, and i want to do the same thing. have you figured out if this works yet?
i was told that the new airport extreme cards wont work in older computers. and that id have to find an older airport card on ebay because they dont make them anymore
Message was edited by: xacharias

[SOLVED] Ndiswrapper, NetworkManager 0.7 and 64-bit Arch Linux

Hi there!
I am having problems configuring my wireless card. I know I have to use Ndiswrapper, and this is what I have tried to do; however, it didn't go quite well.
This is rather odd because it worked perfectly in the 32-bit version of Arch Linux, but now it doesn't work.
So, here comes the code.
valandil ~ $ lspci | grep Network
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
I really use ndiswrapper and have already installed what I think is the proper driver (it seems that the list the official ndiswrapper site had has somehow disappeared.
sudo ndiswrapper -l
Password:
bcmwl5 : driver installed
device (14E4:4311) present (alternate driver: ssb)
Here's iwconfig:
valandil ~ $ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I use NetworkManager 0.7 and have configured properly:
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Vancouver"
KEYMAP="cf"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fuse ndiswrapper fglrx !b44 !mii bcm43xx !snd_pcsp snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="cipher"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@stbd httpd !network syslog-ng netfs crond alsa hal dhcdbd networkmanager fam gdm)
hosts file :
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost cipher
# End of file
/etc/NetworkManager/nm-system-settings.conf:
GNU nano 2.0.9 File: /etc/NetworkManager/nm-system-settings.conf
[main]
plugins=keyfile
[keyfile]
hostname=cipher
I hope you can solve this problem; wireless is really crucial.
Thanks for any help,
Last edited by valandil (2012-05-02 18:27:09)

Alleluia!!!
I think I will write a new rule for myself to follow :
Thou shalt never use ndiswrapper again.
Thanks a lot, wonder, and thanks to you too, Xyne.
FYI, I tried to use something else than ndiswrapper before, but it didn't yield satisfying results. Anyway, thanks.

Arch Linux Pens on sale

Similar Messages

Maybe you are looking for