Arch Linux won't boot (and Linux in general)

Hello everyone,
I've been having this problem for about 3 days now. I finally made an account and post the problem since I can't find a solution (I solved most of my past problems by searching forums and googling so I had never posted before).
So, I was installing Arch linux and Windows 7 on my machine (eee pc 1201t) but had problems booting into linux. First I installed Windows and it worked fine, then I installed Arch linux (this isn't my first time) and rebooted after finishing the installation. But my laptop just won't boot. It just displayed a blinking cursor on the top left of the screen. No error messages whatsoever. It was my first time encountering the problem so I thought reinstalling would do the trick. But it didn't. So I started researching on the same problems on google and discovered that it could be either a HD problem or corrupted MBR or some other problem. My drive works fine, since I can copy data onto it using a live cd (Ubuntu) and Windows works fine with it.
I'm thinking of using "dd" command on my drive and repair the MBR. I would like to know if you guys have encountered the same problem before and what kind of solution you applied.
Note: I also tried installing Ubuntu on my machine but the result was the same.

ngoonee wrote:Live CD, setup grub again, and profit?
I tried this first, had no luck or maybe I wasn't doing it right.
nixpunk wrote:So are you booting into windows using grub or just ntldr?
My laptop boots using ntldr only. Grub does not seem to work. I tried installing Arch and Ubuntu but I had the same result (blinking cursor on the top left of the screen).
schuay wrote:As always with boot problems, you will need to provide some more data about your setup. Output of 'df -h', contents of /boot/grub/menu.lst, install location of grub, etc. Without that, other people can only make guesses about the possible solution
I'll keep that in mind. Sorry for the lack of details regarding my problem. I will try to add as much information as I can the next time I post.
Anyway, I think I solved the problem. I zeroed the MBR on my HD by issuing the command "dd if=/dev/zero of=/dev/sda bs=512 count=1 and grub installed just fine. Thanks for the reply everyone.

Similar Messages

  • Arch CD won't boot, Other Linux installed

    I currently have Ubuntu installed and after reading I feel that I could use some fast Linux. So I downloaded an ISO and checked its md5sum. I wrote it to disk using Ubuntu's "right click on ISO and click write to disk" utility to write the ISO to the disk. Now I tried to boot it and it failed.
    My system is the Via Artigo with an external (usb) LaCie CD/DVD drive. I pressed ESC and F12 upon boot to select the bootable media. On  the list there was CD-ROM and USB-CD-ROM. each time I choose either one the system starts booting the hard drive without and recognition of the CD.
    Do i need to make the CD bootable "chmod +boot /dev/cdrom";)
    Now I won't do anything drastic but what if I deleted my /boot directory, would that force the system to boot the CD

    I got the CD to work on another computer. Maybe the disk doesn't support external drives?
    Anyways I did the install reference to http://wiki.archlinux.org/index.php/Ins … ting_Linux
    After doing this install do i need to delete my old system and replace it with the new
    # ls /
    bin    data  home        initrd.img.old  media    opt   sbin  tmp  vmlinuz
    boot   dev   initrd      lib             mnt      proc  srv   usr  vmlinuz.old
    cdrom  etc   initrd.img  lost+found      newarch  root  sys   var
    # ls /newarch
    bin   dev  home  media  opt   root  srv  tmp  var
    boot  etc  lib   mnt    proc  sbin  sys  usr
    # rm -rf  `ls / | grep -v "newarch"`
    # mv /newarch/* /
    # rm -rf /newarch
    Last edited by Mr.Macdonald (2008-10-09 19:22:02)

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Won't boot and fans go mental

    since updating to 10.5.5 my 17" iMac has began to fail. not sure if this is a coincidence or something to do with the recent updates.
    after about 10mins it started to freeze up with the spinning beach ball of death
    then it would freeze after 2mins
    now it won't boot and the fans go mental and it shuts itself off.
    i held down some keys to get the text up of the booting process and first it went on about "intelPSU missing" or something and finally would say "I/O error" "14 majors" and stuff
    could it be the hard drive?
    could it be the ram?
    could it be the power supply?
    stupid mac
    i can get it into target disc mode but my macbook pro doesn't see it.

    It's probably a combination of a failing power supply unit and logic board. I suggest you take it in to be looked at.
    Try booting from your install disc and running Disk Utility to check things out.
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    Reboot from your hard drive and repair permissions.

  • My computer won´t boot and restarts at Apple logo with the spinning thing

    My computer won´t boot and restarts at Apple logo with the spinning thing and I can´t get it to work.
    Before this happen I had left the computer on without a cable plugged in and so it ran out of power.
    I just pressed the startbutton again after I´ve plugged it in and this problem started.
    Any ideas?
    Mattias
    Sweden

    WRONG FORUM Sorry

  • My laptop won't boot and caps lock blinking continuously (1blink in 4 sec.)

    Sir,
    Today morning I turned on laptop but laptop won't boot and wireless button glowing continuously and also caps lock blinking continuously as 1 blink per 4 sec.

    do you mean 1 blink repeating and then a pause and 1 blink repeating again? The diagnostics show that as a CPU not functional issue.http://support.hp.com/us-en/product/HP-Pavilion-15-Notebook-PC-series/6529948/model/6622489/document/c01732674#AbT2   Try a hard reset.Follow the instructions at the following web page.http://support.hp.com/us-en/product/HP-Pavilion-15-n209tx-Notebook-PC-(ENERGY-STAR)/6529948/model/6622489/document/c01684768 If a hard reset does not help, then contact HP for warranty service.  Is your notebook still in warranty?Check your warranty status Here.

  • HP ProBook 6540b won't boot and caps lock "blinking" continuously.

    Hi,
    I'm trying to help a friend with his laptop a Probook 6540b.
    It won't boot and caps lock "blinking" continuously.
    When I got it caps lock and num lock was "blinking" tre times... indicated memory problems, reseated the memory modules
    and the the "tre time blinking" disappeared, but caps lock now blinking continuously and the only way to shot down the computer
    is to disconnect the power.
    Anyone with some ideas???
    Janson 

    A neighbor had the same problem and asked for my assistance.  I created a rescue disk using my HP desktop running Windows 7 64-bit.  Even though her HP laptop was running Windows 7 32-bit, the disk allowed me to boot into windows on her computer.  I then went to the HP web site and downloaded the latest BIOS and then flashed it to the BIOS chip following the instructions that came with the download.  Everything is working fine now.  Hope this helps.

  • My imac won't boot and is making a loud beeping sound

    my imac won't boot and is making a loud beeping sound - any ideas.  i tried replacing the ram but that didn't help.

     

  • Pro Won't boot and need major help!

    All of a sudden my MP won't boot. It turns on but won't boot and can't figure out why.
    I had just shut it down and let it cool off for about 10 minutes because I had to move it upstairs to my internet connection to register some software....and then it wouldn't boot up. I've tried and re-tried and no go. Opened it up and re-sat the drives and RAM thinking something got loose. There's 4 drives in there including a backup clone. I guess what I need to do is figure out how to boot from the clone. Will pulling the drives and just inserting the clone do that?

    It appears that one of the four drive slots in your Mac Pro already has a clone of the OS. If so, then all you need to do is to hold down the option key after you press the power button until you get a choice of which HD to boot from. You should see both your original boot drive and your clone HD. Select the clone HD, and hopefully you will boot up and be back in business. If you wish to continue to boot from the clone drive, then you will need to set that up in System Preferences as your boot drive. I would suggest that as soon as you get your Mac Pro to boot from the clone drive that you run Disk Warrior on that HD or at least try and repair it from within Apple's Disk Utility program. If your Mac Pro still will not boot from that HD, then it may be beyond repair and have a hardware failure.
    Tom

  • [SOLVED] Arch Linux won't boot

    Hi,
    I was bad and didn't update my packages often enough, and now my arch installation on a desktop won't boot.
    I've booted off of a usb arch install, mounted all of the appropriate harddrive partitions, and used arch-chroot to switch to the offending hard drive.
    The /boot/syslinux/syslinux.cfg is such:
    # Config file for Syslinux -
    # /boot/syslinux/syslinux.cfg
    # Comboot modules:
    # * menu.c32 - provides a text menu
    # * vesamenu.c32 - provides a graphical menu
    # * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloa
    ders
    # * hdt.c32 - hardware detection tool
    # * reboot.c32 - reboots the system
    # * poweroff.com - shutdown the system
    # To Use: Copy the respective files from /usr/lib/syslinux to /boot/sysli
    nux.
    # If /usr and /boot are on the same file system, symlink the files instea
    d
    # of copying them.
    # If you do not use a menu, a 'boot:' prompt will be shown and the system
    # will boot automatically after 5 seconds.
    # Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
    # The wiki provides further configuration examples
    DEFAULT arch
    PROMPT 0 # Set to 1 if you always want to display the boot: prompt
    TIMEOUT 50
    # You can create syslinux keymaps with the keytab-lilo tool
    #KBDMAP de.ktl
    # Menu Configuration
    # Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
    UI menu.c32
    #UI vesamenu.c32
    # Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
    MENU TITLE Arch Linux
    #MENU BACKGROUND splash.png
    MENU COLOR border 30;44 #40ffffff #a0000000 std
    MENU COLOR title 1;36;44 #9033ccff #a0000000 std
    MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
    MENU COLOR unsel 37;44 #50ffffff #a0000000 std
    MENU COLOR help 37;40 #c0ffffff #a0000000 std
    MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
    MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
    MENU COLOR msg07 37;40 #90ffffff #a0000000 std
    MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
    # boot sections follow
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel l
    ine.
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md0 ro
    INITRD ../initramfs-linux.img
    LABEL archfallback
    MENU LABEL Arch Linux Fallback
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md0 ro
    INITRD ../initramfs-linux-fallback.img
    #LABEL windows
    # MENU LABEL Windows
    # COM32 chain.c32
    # APPEND hd0 1
    LABEL hdt
    MENU LABEL HDT (Hardware Detection Tool)
    COM32 hdt.c32
    LABEL reboot
    MENU LABEL Reboot
    COM32 reboot.c32
    LABEL off
    MENU LABEL Power Off
    COMBOOT poweroff.com
    and /etc/mdadm.conf is:
    ARRAY /dev/md0 UUID=3830049a:44459d91:3ad800a8:e77f102f
    ARRAY /dev/md1 UUID=a69afb27:1266d0c2:0c8966db:14500cdb
    ARRAY /dev/md2 UUID=20b0675c:2fcca1a5:0882d652:06324bf6
    ARRAY /dev/md3 UUID=3f0343cb:ff7342c9:fe8e73d4:ba6d61b3
    ARRAY /dev/md4 UUID=287c6b6d:8cbd733c:c6e9d285:a2b14814
    ARRAY /dev/md5 UUID=ccd0d21c:8103251b:2c9a32d1:bc6dcc78
    and it looks to me like this agrees with blkid:
    sh-4.3# blkid
    /dev/sda1: UUID="3830049a-4445-9d91-3ad8-00a8e77f102f" UUID_SUB="932acc3b-f7ba-d443-cf76-9d59b663c651" LABEL="archiso:0" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="9574bd41-8133-4c6a-b5b4-981002a41867"
    /dev/sda2: UUID="a69afb27-1266-d0c2-0c89-66db14500cdb" UUID_SUB="e3de7e2c-8153-0c53-ac5d-ffc678deb269" LABEL="archiso:1" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="fc78d66d-53a4-4c99-a29c-b881d19c1e8d"
    /dev/sda3: UUID="20b0675c-2fcc-a1a5-0882-d65206324bf6" UUID_SUB="36f53577-cd9b-0c4e-4223-58123a6b2426" LABEL="archiso:2" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="b7187772-bf01-4517-99a1-d2aa209aa35b"
    /dev/sda4: UUID="3f0343cb-ff73-42c9-fe8e-73d4ba6d61b3" UUID_SUB="e583cdb9-f523-b4ea-01bb-609779ca3efe" LABEL="archiso:3" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="df9fddd2-762b-4eb3-860c-ef79f545fa77"
    /dev/sda5: UUID="287c6b6d-8cbd-733c-c6e9-d285a2b14814" UUID_SUB="ec1c493a-97f0-48e2-1659-068c25b7aa55" LABEL="archiso:4" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="ba388b64-8f6b-4053-a695-14560832735e"
    /dev/sda6: UUID="ccd0d21c-8103-251b-2c9a-32d1bc6dcc78" UUID_SUB="9b53306f-941d-8048-5780-533ada837e11" LABEL="archiso:5" TYPE="linux_raid_member" PARTLABEL="Microsoft basic data" PARTUUID="6325add3-aa39-4fa2-995c-aacf7165097c"
    /dev/sdb1: UUID="3830049a-4445-9d91-3ad8-00a8e77f102f" UUID_SUB="ec3420f6-d21a-5e69-94f8-d81f277079ec" LABEL="archiso:0" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="9574bd41-8133-4c6a-b5b4-981002a41867"
    /dev/sdb2: UUID="a69afb27-1266-d0c2-0c89-66db14500cdb" UUID_SUB="4b1e7230-ffec-0985-1ac7-a69aec27eec2" LABEL="archiso:1" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="fc78d66d-53a4-4c99-a29c-b881d19c1e8d"
    /dev/sdb3: UUID="20b0675c-2fcc-a1a5-0882-d65206324bf6" UUID_SUB="4d1721b6-d87f-00b6-4bd9-45712592b033" LABEL="archiso:2" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="b7187772-bf01-4517-99a1-d2aa209aa35b"
    /dev/sdb4: UUID="3f0343cb-ff73-42c9-fe8e-73d4ba6d61b3" UUID_SUB="085a16ce-1a7c-d79e-eb92-fed6b1b70365" LABEL="archiso:3" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="df9fddd2-762b-4eb3-860c-ef79f545fa77"
    /dev/sdb5: UUID="287c6b6d-8cbd-733c-c6e9-d285a2b14814" UUID_SUB="10857018-548a-9311-178e-7d2b06e25942" LABEL="archiso:4" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="ba388b64-8f6b-4053-a695-14560832735e"
    /dev/sdb6: UUID="ccd0d21c-8103-251b-2c9a-32d1bc6dcc78" UUID_SUB="d577ff9e-a687-f335-7062-f2f629886a58" LABEL="archiso:5" TYPE="linux_raid_member" PARTLABEL="Microsoft basic data" PARTUUID="6325add3-aa39-4fa2-995c-aacf7165097c"
    /dev/sdc1: LABEL="/dev/sdc1" UUID="de2a5dc6-4b22-466f-819a-86dda839c7e6" TYPE="ext4" PARTUUID="c3072e18-01"
    /dev/sdc2: LABEL="/dev/sdc2" UUID="2909b560-e9b9-48cf-a194-7b7c9c38d312" TYPE="ext4" PARTUUID="c3072e18-02"
    /dev/md127: UUID="3f9ddf01-4f7c-4633-844d-82a1781170a5" TYPE="ext4"
    /dev/md126: UUID="7105ac32-610b-4d4b-935b-675edc71ff32" TYPE="ext4"
    /dev/md125: UUID="90cc6dbe-2d0f-422b-8653-965f103b8e8d" TYPE="ext4"
    /dev/md124: UUID="5fd8960f-6017-49c8-bc7e-c972aa0e2f31" TYPE="ext4"
    /dev/md123: UUID="7B9075B74838729A" TYPE="ntfs"
    /dev/md122: UUID="96468ceb-857b-467e-b9c7-2a37e13fde6f" TYPE="ext4"
    and lsblk is:
    sh-4.3# lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 931.5G 0 disk
    |-sda1 8:1 0 1G 0 part
    | `-md126 9:126 0 1024M 0 raid1 /boot
    |-sda2 8:2 0 24G 0 part
    | `-md122 9:122 0 24G 0 raid1 /
    |-sda3 8:3 0 15G 0 part
    | `-md127 9:127 0 15G 0 raid1 /var
    |-sda4 8:4 0 100G 0 part
    | `-md125 9:125 0 100G 0 raid1 /home/j3doucet
    |-sda5 8:5 0 100G 0 part
    | `-md124 9:124 0 100G 0 raid1 /home/c2hollow
    `-sda6 8:6 0 691.5G 0 part
    `-md123 9:123 0 691.4G 0 raid1 /media
    sdb 8:16 0 931.5G 0 disk
    |-sdb1 8:17 0 1G 0 part
    | `-md126 9:126 0 1024M 0 raid1 /boot
    |-sdb2 8:18 0 24G 0 part
    | `-md122 9:122 0 24G 0 raid1 /
    |-sdb3 8:19 0 15G 0 part
    | `-md127 9:127 0 15G 0 raid1 /var
    |-sdb4 8:20 0 100G 0 part
    | `-md125 9:125 0 100G 0 raid1 /home/j3doucet
    |-sdb5 8:21 0 100G 0 part
    | `-md124 9:124 0 100G 0 raid1 /home/c2hollow
    `-sdb6 8:22 0 691.5G 0 part
    `-md123 9:123 0 691.4G 0 raid1 /media
    sdc 8:32 1 58.9G 0 disk
    |-sdc1 8:33 1 19.5G 0 part /etc/resolv.conf
    `-sdc2 8:34 1 39.4G 0 part
    sr0 11:0 1 1024M 0 rom
    Everything looks fine to me, /dev/sda1 is /boot, which has the same UUID as what mdadm has for /dev/md0, which is what syslinux.cfg has been told to boot off of. I'm not sure what to do from here.
    Last edited by c2hollow (2015-01-02 00:43:56)

    It's long that Arch uses rw argument on kernel command line.
    You should correct your syslinux.cfg as follow.
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=LABEL="archiso:1" rw ## <<< Here's the diff
    INITRD ../initramfs-linux.img
    This isn't for the fallback menu entry, you just analyze the differences and do same there.
    I'm not familiar with syslinux, I just suppose you may try to test these options on-the-fly, before write them permanently. So when the syslinux menu will appear at boot time, please find the way to enter in edit mode and apply the correction. That will stay for the time you boot once. But it will ensure if it'll be good enough and do the writing later once you've booted.

  • [SOLVED] Arch linux won't boot after pacman -Syu

    So yesterday I upgraded the packages on my system along with installing steam.
    There was one conflicting package but I don't remember exactly what it was (something containing usb?). I just hit Y to continue but in retrospect maybe should have investigated more.
    Now when I start my system it gets up to "Started Accounts Service" and then the rest of the output is on a single line as if the newline characters aren't being printed. It stays like this for around 30 seconds before my graphics cards fans max out and then it reboots the system.
    Any help debugging this would be appreciated.
    Edit: More info in consecutive posts
    pacman -Q:
    a52dec 0.7.4-8
    aalib 1.4rc5-10
    accerciser 3.8.2-1
    accountsservice 0.6.35-2
    acl 2.2.52-2
    acpid 2.0.21-1
    aisleriot 3.10.2-1
    alsa-lib 1.0.27.2-1
    alsa-plugins 1.0.27-2
    alsa-utils 1.0.27.2-1
    anjuta 3.10.2-2
    apache 2.2.26-1
    apr 1.5.0-1
    apr-util 1.5.3-2
    archlinux-keyring 20140220-1
    aspell 0.60.6.1-1
    at-spi2-atk 2.10.2-1
    at-spi2-core 2.10.2-1
    atk 2.10.0-1
    atkmm 2.22.7-1
    attr 2.4.47-1
    autoconf 2.69-1
    autogen 5.18.2-1
    automake 1.14.1-1
    avahi 0.6.31-11
    babl 0.1.10-1
    baobab 3.10.1-1
    bash 4.2.045-5
    bijiben 3.10.2-1
    binutils 2.24-2
    bison 3.0.2-1
    bluez 5.14-1
    boost 1.55.0-4
    boost-libs 1.55.0-4
    brasero 3.10.0-1
    brltty 4.5-6
    bzip2 1.0.6-5
    ca-certificates 20130906-1
    ca-certificates-java 20130815-1
    cabextract 1.4-2
    cairo 1.12.16-1
    cairomm 1.10.0-3
    cantarell-fonts 0.0.15-1
    caribou 0.4.13-1
    cdparanoia 10.2-5
    cdrdao 1.2.3-6
    cdrkit 1.1.11-3
    celt 0.11.3-2
    celt0.5.1 0.5.1.3-3
    cheese 3.10.2-2
    chromaprint 1.1-1
    chromium 33.0.1750.117-1
    cifs-utils 6.2-1
    cloog 0.18.1-2
    clutter 1.16.4-1
    clutter-gst 2.0.10-1
    clutter-gtk 1.4.4-4
    codeblocks 13.12-2
    cogl 1.16.2-1
    colord 1.0.6-1
    colord-gtk 0.1.25-1
    compositeproto 0.4.2-2
    coreutils 8.22-2
    cracklib 2.9.0-2
    cronie 1.4.11-1
    cryptsetup 1.6.3-2
    cups-pk-helper 0.2.5-1
    curl 7.35.0-1
    cython 0.20.1-1
    damageproto 1.2.1-2
    db 5.3.28-1
    dbus 1.8.0-1
    dbus-glib 0.102-1
    dconf 0.18.0-1
    desktop-file-utils 0.22-1
    devhelp 3.10.0-1
    device-mapper 2.02.105-1
    devil 1.7.8-18
    dhcpcd 6.2.1-1
    dialog 1:1.2_20140219-1
    diffutils 3.3-1
    dirmngr 1.1.1-2
    djvulibre 3.5.25.3-1
    dnssec-anchors 20130320-1
    dnsutils 9.9.2.P2-1
    dotconf 1.3-4
    dvd+rw-tools 7.1-4
    e2fsprogs 1.42.9-1
    elfutils 0.158-1
    empathy 3.10.3-1
    enca 1.15-1
    enchant 1.6.0-4
    eog 3.10.2-2
    epiphany 3.10.3-1
    evince 3.10.3-1
    evolution 3.10.4-1
    evolution-data-server 3.10.4-1
    exempi 2.2.1-2
    exiv2 0.24-1
    expat 2.1.0-3
    faac 1.28-5
    faad2 2.7-4
    fakeroot 1.20-1
    farstream 0.2.3-1
    ffmpeg 1:2.1.3-1
    fftw 3.3.3-2
    file 5.17-1
    file-roller 3.10.2.1-1
    filesystem 2013.05-2
    findutils 4.4.2-5
    firefox 27.0.1-1
    five-or-more 3.10.2-1
    fixesproto 5.0-2
    flac 1.3.0-1
    flashplugin 11.2.202.341-1
    flex 2.5.38-1
    fluidsynth 1.1.6-2
    folks 0.9.6-1
    fontconfig 2.11.0-1
    fontsproto 2.1.2-1
    four-in-a-row 3.10.1-1
    freeglut 2.8.1-1
    freetype2 2.5.2-1
    fribidi 0.19.6-1
    fuse 2.9.3-2
    gamin 0.1.10-8
    gawk 4.1.0-2
    gc 7.4.0-1
    gcc 4.8.2-8
    gcc-libs 4.8.2-8
    gconf 3.2.6-3
    gcr 3.10.1-2
    gd 2.1.0-2
    gdbm 1.11-1
    gdk-pixbuf2 2.30.5-1
    gdl 3.10.0-1
    gdm 3.10.0.1-2
    gedit 3.10.4-1
    gegl 0.2.0-10
    geoclue 0.12.99-1
    geoclue2 2.0.0-1
    geocode-glib 3.10.0-1
    geoip 1.5.1-2
    geoip-database 20140108-1
    gettext 0.18.3.2-1
    ghostscript 9.10-3
    giflib 5.0.5-1
    git 1.9.0-1
    gjs 1.38.1-1
    glade 3.16.1-1
    glamor-egl 0.6.0-1
    glew 1.10.0-2
    glib-networking 2.38.2-1
    glib2 2.38.2-1
    glibc 2.19-2
    glibmm 2.38.1-1
    glu 9.0.0-2
    gmime 2.6.18-1
    gmp 5.1.3-2
    gnome-backgrounds 3.10.1-1
    gnome-bluetooth 3.10.0-1
    gnome-calculator 3.10.2-1
    gnome-chess 3.10.3-1
    gnome-clocks 3.10.1-1
    gnome-color-manager 3.10.1-2
    gnome-contacts 3.10.1-1
    gnome-control-center 3.10.2-2
    gnome-desktop 1:3.10.2-1
    gnome-devel-docs 3.10.1-1
    gnome-dictionary 3.10.0-1
    gnome-disk-utility 3.10.0-1
    gnome-documents 3.10.1-1
    gnome-font-viewer 3.10.0-1
    gnome-getting-started-docs 3.10.1-1
    gnome-icon-theme 3.10.0-1
    gnome-icon-theme-extras 3.6.2-1
    gnome-icon-theme-symbolic 3.10.1-1
    gnome-keyring 3.10.1-2
    gnome-klotski 3.10.0-1
    gnome-mahjongg 3.10.2-1
    gnome-maps 3.10.2-1
    gnome-menus 3.10.1-1
    gnome-mines 3.10.1-1
    gnome-music 3.10.1-2
    gnome-nettool 3.8.1-1
    gnome-nibbles 3.10.1-1
    gnome-online-accounts 3.10.2-1
    gnome-online-miners 3.10.3-1
    gnome-photos 3.10.2-1
    gnome-robots 3.10.2-1
    gnome-screenshot 3.10.1-1
    gnome-session 3.10.1-1
    gnome-settings-daemon 3.10.2-3
    gnome-shell 3.10.4-1
    gnome-shell-extensions 3.10.1-1
    gnome-sudoku 3.10.2-1
    gnome-system-log 3.9.90-1
    gnome-system-monitor 3.10.2-1
    gnome-terminal 3.10.2-1
    gnome-tetravex 3.10.1-1
    gnome-themes-standard 3.10.0-1
    gnome-user-docs 3.10.2-1
    gnome-user-share 3.10.1-1
    gnome-video-effects 0.4.0-2
    gnome-weather 3.10.1-1
    gnupg 2.0.22-2
    gnutls 3.2.11-1
    gobject-introspection 1.38.0-1
    google-talkplugin 4.9.1.0-1
    gpgme 1.4.3-1
    gpm 1.20.7-4
    graphite 1:1.2.4-1
    graphviz 2.36.0-2
    grep 2.16-1
    grilo 0.2.9-1
    grilo-plugins 0.2.11-1
    groff 1.22.2-5
    gsettings-desktop-schemas 3.10.1-1
    gsfonts 1.0.7pre44-4
    gsm 1.0.13-7
    gssdp 0.14.7-1
    gst-plugins-bad 1.2.3-1
    gst-plugins-base 1.2.3-1
    gst-plugins-base-libs 1.2.3-1
    gst-plugins-good 1.2.3-1
    gstreamer 1.2.3-1
    gstreamer0.10 0.10.36-3
    gstreamer0.10-base 0.10.36-2
    gtk-update-icon-cache 2.24.22-1
    gtk-vnc 0.5.3-3
    gtk2 2.24.22-1
    gtk3 3.10.7-1
    gtkhtml4 4.6.6-1
    gtkmm3 3.10.1-1
    gtksourceview3 3.10.2-1
    gts 0.7.6-3
    gucharmap 3.10.1-1
    guile 2.0.9-1
    gummiboot 43-2
    gupnp 0.20.10-1
    gupnp-av 0.12.5-1
    gupnp-dlna 0.10.2-1
    gvfs 1.18.3-3
    gzip 1.6-1
    harfbuzz 0.9.26-1
    harfbuzz-icu 0.9.26-1
    hicolor-icon-theme 0.13-1
    hspell 1.2-1
    hunspell 1.3.2-3
    hwids 20130915.1-1
    iagno 3.10.1-1
    iana-etc 2.30-4
    icon-naming-utils 0.8.90-2
    icu 52.1-1
    idnkit 1.0-3
    ilmbase 2.0.1-2
    imagemagick 6.8.8.7-1
    imlib2 1.4.6-1
    inetutils 1.9.2-1
    inputproto 2.3-1
    intel-dri 10.0.3-1
    iproute2 3.12.0-1
    iptables 1.4.21-1
    iputils 20121221-3
    isl 0.12.2-1
    iso-codes 3.44-1
    jack 0.124.1-1
    jasper 1.900.1-10
    jfsutils 1.1.15-4
    jre7-openjdk 7.u51_2.4.5-1
    jre7-openjdk-headless 7.u51_2.4.5-1
    js 17.0.0-1
    json-c 0.11-1
    json-glib 0.16.2-1
    kbd 2.0.1-1
    kbproto 1.0.6-1
    keepass 2.25-1
    keyutils 1.5.8-1
    kmod 16-1
    krb5 1.12.1-1
    lame 3.99.5-2
    lcms 1.19-5
    lcms2 2.5-2
    ldb 1.1.16-1
    ldns 1.6.17-1
    less 458-1
    lib32-acl 2.2.52-2
    lib32-attr 2.4.47-1
    lib32-bzip2 1.0.6-1
    lib32-elfutils 0.158-1
    lib32-expat 2.1.0-1
    lib32-fontconfig 2.11.0-1
    lib32-freetype2 2.5.2-1
    lib32-gcc-libs 4.8.2-8
    lib32-gettext 0.18.3.2-1
    lib32-glib2 2.38.2-1
    lib32-glibc 2.19-1
    lib32-glu 9.0.0-2
    lib32-libdbus 1.8.0-1
    lib32-libdrm 2.4.52-1
    lib32-libffi 3.0.13-1
    lib32-libgcrypt 1.6.0-1
    lib32-libgpg-error 1.12-1
    lib32-libice 1.0.8-1
    lib32-libpciaccess 0.13.2-1
    lib32-libpng 1.6.8-1
    lib32-libsm 1.2.2-1
    lib32-libx11 1.6.2-1
    lib32-libxau 1.0.8-1
    lib32-libxcb 1.10-1
    lib32-libxcursor 1.1.14-1
    lib32-libxdamage 1.1.4-1
    lib32-libxdmcp 1.1.1-1
    lib32-libxext 1.3.2-1
    lib32-libxfixes 5.0.1-1
    lib32-libxi 1.7.2-1
    lib32-libxrandr 1.4.2-1
    lib32-libxrender 0.9.8-1
    lib32-libxxf86vm 1.1.3-1
    lib32-llvm-libs 3.4-1
    lib32-mesa 10.0.3-1
    lib32-mesa-libgl 10.0.3-1
    lib32-pcre 8.34-1
    lib32-systemd 208-2
    lib32-util-linux 2.24-1
    lib32-xz 5.0.5-1
    lib32-zlib 1.2.8-1
    libaio 0.3.109-7
    libanjuta 3.10.2-2
    libao 1.2.0-1
    libarchive 3.1.2-4
    libass 0.11.1-1
    libassuan 2.1.1-1
    libasyncns 0.8-5
    libatasmart 0.19-2
    libatomic_ops 7.2.e-1
    libavc1394 0.5.4-2
    libbluray 0.5.0-1
    libbsd 0.6.0-2
    libcaca 0.99.beta18-2
    libcacard 1.7.0-2
    libcanberra 0.30-4
    libcanberra-pulse 0.30-4
    libcap 2.24-1
    libcap-ng 0.7.3-1
    libcddb 1.3.2-4
    libcdio 0.92-1
    libcdio-paranoia 10.2+0.90+1-2
    libchamplain 0.12.7-1
    libcl 1.1-3
    libcroco 0.6.8-1
    libcups 1.7.1-3
    libdaemon 0.14-2
    libdatrie 0.2.6-1
    libdbus 1.8.0-1
    libdca 0.0.5-4
    libdmapsharing 2.9.23-1
    libdrm 2.4.52-1
    libdv 1.0.0-5
    libdvbpsi 1:1.1.2-1
    libdvdnav 4.2.1-1
    libdvdread 4.2.1-1
    libebml 1.3.0-2
    libedit 20130601_3.1-1
    libevdev 0.6-1
    libevent 2.0.21-3
    libexif 0.6.21-2
    libffi 3.0.13-4
    libfontenc 1.1.2-1
    libgcrypt 1.6.1-1
    libgcrypt15 1.5.3-1
    libgda 5.2.1-2
    libgdata 0.14.1-1
    libgdiplus 2.10.9-3
    libgdm 3.10.0.1-2
    libgee 0.12.0-1
    libgme 0.6.0-2
    libgnome-keyring 3.10.1-2
    libgnomekbd 3.6.0-2
    libgpg-error 1.12-1
    libgsf 1.14.28-1
    libgssglue 0.4-2
    libgtop 2.28.5-1
    libgusb 0.1.6-1
    libgweather 3.10.2-1
    libgxps 0.2.2-3
    libibus 1.5.5-1
    libical 1.0-3
    libice 1.0.8-2
    libid3tag 0.15.1b-8
    libidn 1.28-2
    libiec61883 1.2.0-4
    libimobiledevice 1.1.5-2
    libiscsi 1.7.0-2
    libjpeg-turbo 1.3.0-4
    libkate 0.4.1-4
    libksba 1.3.0-1
    libldap 2.4.39-1
    liblouis 2.5.2-2
    liblqr 0.4.2-1
    libltdl 2.4.2-12
    libmad 0.15.1b-7
    libmariadbclient 5.5.35-1
    libmatroska 1.4.1-1
    libmbim 1.6.0-1
    libmm-glib 1.2.0-2
    libmms 0.6.2-1
    libmng 2.0.2-3
    libmodplug 0.8.8.4-2
    libmp4v2 2.0.0-3
    libmpc 1.0.2-2
    libmpcdec 1.2.6-3
    libmpeg2 0.5.1-4
    libmusicbrainz5 5.0.1-1
    libnautilus-extension 3.10.1-1
    libnice 0.1.4-1
    libnl 3.2.23-1
    libnotify 0.7.6-1
    liboauth 1.0.1-1
    libofa 0.9.3-5
    libogg 1.3.1-2
    libpaper 1.1.24-7
    libpcap 1.5.3-1
    libpciaccess 0.13.2-2
    libpeas 1.9.0-1
    libpipeline 1.2.6-1
    libplist 1.10-1
    libpng 1.6.9-1
    libproxy 0.4.11-2
    libpst 0.6.63-1
    libpulse 4.0-6
    libpwquality 1.2.3-1
    libqmi 1.8.0-1
    libraw1394 2.1.0-2
    librsvg 1:2.40.1-3
    libsamplerate 0.1.8-3
    libsasl 2.1.26-7
    libsecret 0.16-2
    libshout 1:2.3.1-2
    libsigc++ 2.3.1-1
    libsm 1.2.2-2
    libsndfile 1.0.25-3
    libsoup 2.44.2-1
    libspectre 0.2.7-1
    libspiro 20071029-3
    libsrtp 15.1c9bd90-3
    libssh2 1.4.3-2
    libtar 1.2.20-1
    libtasn1 3.4-1
    libthai 0.1.19-1
    libtheora 1.1.1-3
    libtiff 4.0.3-4
    libtiger 0.3.4-3
    libtirpc 0.2.3-2
    libtool 2.4.2-12
    libtorrent-rasterbar 1:0.16.12-2
    libtracker-sparql 0.16.4-1
    libtxc_dxtn 1.0.1-5
    libunistring 0.9.3-6
    libupnp 1.6.19-1
    libusb 1.0.18-1
    libutempter 1.1.6-2
    libva 1.2.1-1
    libvdpau 0.7-1
    libvisual 0.4.0-4
    libvorbis 1.3.4-1
    libvpx 1.3.0-1
    libwacom 0.8-1
    libwbclient 4.1.4-1
    libwebp 0.4.0-1
    libwnck3 3.4.7-1
    libx11 1.6.2-1
    libxau 1.0.8-2
    libxaw 1.0.12-1
    libxcb 1.10-1
    libxcomposite 0.4.4-1
    libxcursor 1.1.14-1
    libxdamage 1.1.4-1
    libxdmcp 1.1.1-1
    libxext 1.3.2-1
    libxfixes 5.0.1-1
    libxfont 1.4.7-1
    libxft 2.3.1-2
    libxi 1.7.2-1
    libxinerama 1.1.3-2
    libxkbcommon 0.4.0-1
    libxkbfile 1.0.8-1
    libxklavier 5.3-1
    libxml2 2.9.1-5
    libxmu 1.1.2-1
    libxpm 3.5.11-1
    libxrandr 1.4.2-2
    libxrender 0.9.8-1
    libxres 1.0.7-1
    libxshmfence 1.1-1
    libxslt 1.1.28-3
    libxss 1.2.2-2
    libxt 1.1.4-1
    libxtst 1.2.2-1
    libxv 1.0.10-1
    libxvmc 1.0.8-1
    libxxf86vm 1.1.3-1
    libytnef 1.5-3
    libzapojit 0.0.3-1
    licenses 20130203-1
    lightsoff 3.10.1-1
    linux 3.13.4-1
    linux-api-headers 3.13.2-1
    linux-firmware 20140123.418320b-1
    linux-headers 3.13.4-1
    llvm-libs 3.4-1
    logrotate 3.8.7-1
    lsb-release 1.4-14
    lua 5.2.3-1
    lvm2 2.02.105-1
    lzo2 2.06-3
    m4 1.4.17-1
    make 4.0-2
    man-db 2.6.6-1
    man-pages 3.59-1
    mash 0.2.0-3
    mcpp 2.7.2-4
    mdadm 3.3-2
    memcached 1.4.17-1
    mencoder 36498-5
    mesa 10.0.3-1
    mesa-demos 8.1.0-1
    mime-types 9-1
    minecraft latest-21
    mjpegtools 2.0.0-4
    mkinitcpio 16-2
    mkinitcpio-busybox 1.21.1-2
    mobile-broadband-provider-info 20120614-2
    mod_dnssd 0.6-4
    modemmanager 1.2.0-2
    mono 3.2.3-2
    mousetweaks 3.10.0-1
    mozilla-common 1.4-3
    mpfr 3.1.2.p5-1
    mpg123 1.18.1-1
    mtdev 1.1.4-1
    mutter 3.10.4-1
    mutter-wayland 3.10.4-1
    nano 2.2.6-2
    nautilus 3.10.1-1
    nautilus-sendto 3.8.1-1
    ncurses 5.9-6
    neon 0.30.0-1
    netctl 1.4-2
    nettle 2.7.1-1
    network-manager-applet 0.9.8.8-1
    networkmanager 0.9.8.8-1
    nspr 4.10.3-1
    nss 3.15.4-1
    nvidia 331.38-3
    nvidia-libgl 331.38-1
    nvidia-utils 331.38-1
    nvidiabl 0.81-2
    openal 1.15.1-1
    opencore-amr 0.1.3-1
    openexr 2.0.1-2
    openjpeg 1.5.1-2
    openresolv 3.5.6-1
    openssh 6.5p1-2
    openssl 1.0.1.f-1
    opus 1.1-1
    orc 0.4.18-1
    orca 3.10.2-1
    p11-kit 0.20.2-1
    p7zip 9.20.1-9
    pacman 4.1.2-5
    pacman-mirrorlist 20140107-1
    pam 1.1.8-3
    pambase 20130928-1
    pango 1.36.2-1
    pangomm 2.34.0-1
    patch 2.7.1-2
    pciutils 3.2.1-1
    pcmciautils 018-7
    pcre 8.34-2
    perl 5.18.2-2
    perl-error 0.17022-1
    perl-xml-parser 2.41-4
    perl-xml-simple 2.20-1
    phantomjs 1.9.7-1
    pinentry 0.8.3-1
    pixman 0.32.4-1
    pkg-config 0.28-1
    pm-quirks 0.20100619-3
    pm-utils 1.4.1-6
    polkit 0.112-1
    poppler 0.24.5-1
    poppler-glib 0.24.5-1
    popt 1.16-7
    postgresql 9.3.3-1
    postgresql-libs 9.3.3-1
    ppp 2.4.5-8
    premake 4.3-3
    procps-ng 3.3.9-2
    psmisc 22.20-1
    pth 2.0.7-5
    pulseaudio 4.0-6
    pulseaudio-alsa 2-2
    pygobject-devel 3.10.2-1
    python 3.3.4-1
    python-atspi 2.10.0-1
    python-cairo 1.10.0-3
    python-dbus 1.2.0-2
    python-dbus-common 1.2.0-2
    python-gobject 3.10.2-1
    python-setuptools 2.2-1
    python-xdg 0.25-1
    python2 2.7.6-2
    python2-atspi 2.10.0-1
    python2-beaker 1.6.4-1
    python2-cairo 1.10.0-1
    python2-gobject 3.10.2-1
    python2-mako 0.9.1-1
    python2-markupsafe 0.18-2
    qbittorrent 3.1.8-1
    qt4 4.8.5-7
    qtchooser 39-1
    qtwebkit 2.3.3-1
    quadrapassel 3.10.2-1
    randrproto 1.4.0-1
    rcm-git v1.2.0-1
    readline 6.2.004-2
    recode 3.6-8
    recordmydesktop 0.3.8.1-6
    recordproto 1.14.2-1
    redis 2.8.6-1
    reiserfsprogs 3.6.24-1
    renderproto 0.11.1-2
    rest 0.7.90-2
    rtkit 0.11-4
    rtmpdump 20131205-1
    run-parts 4.4-1
    rygel 0.20.3-1
    s-nail 14.5.2-4
    sbc 1.2-1
    schroedinger 1.0.11-2
    scrnsaverproto 1.2.2-1
    sdl 1.2.15-5
    sdl_image 1.2.12-3
    seahorse 3.10.2-1
    sed 4.2.2-3
    serf 1.3.2-1
    shadow 4.1.5.1-7
    shared-color-profiles 0.1.5-1
    shared-color-targets 0.1.2-1
    shared-mime-info 1.2-2
    smbclient 4.1.4-1
    snappy 1.1.1-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.7.1-1
    spandsp 0.0.6pre21-2
    speech-dispatcher 0.8-2
    speex 1.2rc1-4
    spice-gtk3 0.23-1
    spotify 0.9.4.183-3
    sqlite 3.8.3.1-1
    startup-notification 0.12-4
    steam 1.0.0.47-1
    subversion 1.8.5-3
    sudo 1.8.9.p5-1
    sushi 3.10.0-1
    swell-foop 3.10.1-1
    sysfsutils 2.1.0-8
    systemd 208-11
    systemd-sysvcompat 208-11
    t1lib 5.1.2-5
    taglib 1.9.1-1
    tali 3.10.2-1
    talloc 2.0.8-2
    tar 1.27.1-1
    tcl 8.6.1-1
    tdb 1.2.12-1
    telepathy-farstream 0.6.0-1
    telepathy-glib 0.22.0-1
    telepathy-logger 0.8.0-1
    telepathy-mission-control 5.16.0-1
    tevent 0.9.19-1
    texinfo 5.2-2
    tmux 1.9-1
    totem 3.10.1-1
    totem-plparser 3.10.1-1
    totem-plugin 3.10.1-1
    tracker 0.16.4-1
    ttf-dejavu 2.34-1
    tzdata 2013i-1
    udisks2 2.1.2-1
    unixodbc 2.3.2-1
    unzip 6.0-6
    upower 0.9.23-2
    usbmuxd 1.0.8-2
    usbredir 0.6-4
    usbutils 007-1
    util-linux 2.24.1-1
    v4l-utils 1.0.1-1
    vala 0.22.1-1
    vde2 2.3.2-5
    vi 1:050325-3
    videoproto 2.3.2-1
    vim 7.4.135-2
    vim-runtime 7.4.135-2
    vinagre 3.10.2-1
    vino 3.10.1-2
    virtualgl 2.3.3-1
    vlc 2.1.3-1
    vte-common 0.34.9-1
    vte3 0.34.9-1
    vundle-git 0.9.1.56.gf31aa52-1
    wavpack 4.70.0-2
    wayland 1.4.0-1
    webkitgtk 2.2.5-1
    webrtc-audio-processing 0.1-1
    which 2.20-6
    whois 5.1.1-1
    wildmidi 0.3.2-1
    wine 1.7.13-1
    winetricks 20130707-1
    wpa_supplicant 2.0-4
    wxgtk2.8 2.8.12.1-1
    x264 20131030-2
    xbitmaps 1.1.1-2
    xcb-proto 1.10-1
    xcb-util 0.3.9-1
    xcb-util-keysyms 0.3.9-1
    xdg-user-dirs 0.15-1
    xdg-user-dirs-gtk 0.10-1
    xdg-utils 1.1.0.git20140207-1
    xextproto 7.3.0-1
    xf86-input-evdev 2.8.2-2
    xf86-input-synaptics 1.7.3-1
    xf86-video-intel 2.99.910-1
    xf86vidmodeproto 2.3.1-2
    xfsprogs 3.1.11-2
    xineramaproto 1.2.1-2
    xkeyboard-config 2.11-2
    xorg-bdftopcf 1.0.4-1
    xorg-font-util 1.3.0-1
    xorg-font-utils 7.6-3
    xorg-fonts-alias 1.0.3-1
    xorg-fonts-encodings 1.0.4-3
    xorg-fonts-misc 1.0.1-2
    xorg-iceauth 1.0.6-1
    xorg-luit 1.1.1-2
    xorg-mkfontdir 1.0.7-1
    xorg-mkfontscale 1.1.1-1
    xorg-server 1.15.0-5
    xorg-server-common 1.15.0-5
    xorg-server-utils 7.6-3
    xorg-sessreg 1.0.8-1
    xorg-setxkbmap 1.3.0-1
    xorg-twm 1.0.8-1
    xorg-xauth 1.0.8-1
    xorg-xbacklight 1.2.0-1
    xorg-xclock 1.0.7-1
    xorg-xcmsdb 1.0.4-1
    xorg-xgamma 1.0.5-1
    xorg-xhost 1.0.6-1
    xorg-xinit 1.3.3-3
    xorg-xinput 1.6.1-1
    xorg-xkbcomp 1.2.4-1
    xorg-xmessage 1.0.4-1
    xorg-xmodmap 1.0.8-1
    xorg-xrandr 1.4.1-1
    xorg-xrdb 1.1.0-1
    xorg-xrefresh 1.0.5-1
    xorg-xset 1.2.3-1
    xorg-xsetroot 1.1.1-1
    xproto 7.0.25-1
    xterm 301-1
    xvidcore 1.3.2-3
    xz 5.0.5-2
    yelp 3.10.1-2
    yelp-xsl 3.10.1-1
    zeitgeist 0.9.14-1
    zenity 3.10.2-1
    zlib 1.2.8-3
    zsh 5.0.5-1
    zvbi 0.2.33-6
    Thanks!
    Last edited by andm11 (2014-02-23 06:07:40)

    jasonwryan wrote:Pacman's log and the journal would be the first place to look.
    Thanks for the reply, here is my pacman.log:
    [2014-01-25 05:44] [PACMAN] Running 'pacman -r /mnt -Sy --cachedir=/mnt/var/cache/pacman/pkg --noconfirm base base-devel'
    [2014-01-25 05:44] [PACMAN] synchronizing package lists
    [2014-01-25 05:47] [PACMAN] installed linux-api-headers (3.12.4-1)
    [2014-01-25 05:47] [PACMAN] installed tzdata (2013i-1)
    [2014-01-25 05:47] [PACMAN] installed iana-etc (2.30-4)
    [2014-01-25 05:47] [PACMAN] installed filesystem (2013.05-2)
    [2014-01-25 05:47] [PACMAN] installed glibc (2.18-12)
    [2014-01-25 05:47] [PACMAN] installed ncurses (5.9-6)
    [2014-01-25 05:47] [PACMAN] installed readline (6.2.004-2)
    [2014-01-25 05:47] [PACMAN] installed bash (4.2.045-5)
    [2014-01-25 05:47] [PACMAN] installed bzip2 (1.0.6-5)
    [2014-01-25 05:47] [PACMAN] installed gcc-libs (4.8.2-7)
    [2014-01-25 05:47] [PACMAN] installed db (5.3.28-1)
    [2014-01-25 05:47] [PACMAN] installed zlib (1.2.8-3)
    [2014-01-25 05:47] [PACMAN] installed cracklib (2.9.0-2)
    [2014-01-25 05:47] [PACMAN] installed libgssglue (0.4-2)
    [2014-01-25 05:47] [PACMAN] installed libtirpc (0.2.3-2)
    [2014-01-25 05:47] [PACMAN] installed pambase (20130928-1)
    [2014-01-25 05:47] [PACMAN] installed pam (1.1.8-2)
    [2014-01-25 05:47] [PACMAN] installed attr (2.4.47-1)
    [2014-01-25 05:47] [PACMAN] installed acl (2.2.52-2)
    [2014-01-25 05:47] [PACMAN] installed gmp (5.1.3-2)
    [2014-01-25 05:47] [PACMAN] installed libcap (2.24-1)
    [2014-01-25 05:47] [PACMAN] installed gdbm (1.11-1)
    [2014-01-25 05:47] [PACMAN] installed perl (5.18.2-2)
    [2014-01-25 05:47] [PACMAN] installed openssl (1.0.1.f-1)
    [2014-01-25 05:47] [PACMAN] installed coreutils (8.22-2)
    [2014-01-25 05:47] [PACMAN] installed run-parts (4.4-1)
    [2014-01-25 05:47] [PACMAN] installed cronie (1.4.11-1)
    [2014-01-25 05:47] [PACMAN] installed libdbus (1.8.0-1)
    [2014-01-25 05:47] [PACMAN] installed expat (2.1.0-3)
    [2014-01-25 05:47] [PACMAN] installed dbus (1.8.0-1)
    [2014-01-25 05:47] [PACMAN] installed pcre (8.34-2)
    [2014-01-25 05:47] [PACMAN] installed libffi (3.0.13-4)
    [2014-01-25 05:47] [PACMAN] installed glib2 (2.38.2-1)
    [2014-01-25 05:47] [PACMAN] installed kbd (2.0.1-1)
    [2014-01-25 05:47] [PACMAN] installed kmod (16-1)
    [2014-01-25 05:47] [PACMAN] installed hwids (20130915.1-1)
    [2014-01-25 05:47] [PACMAN] installed libgpg-error (1.12-1)
    [2014-01-25 05:47] [PACMAN] installed libgcrypt (1.6.0-2)
    [2014-01-25 05:47] [PACMAN] installed shadow (4.1.5.1-7)
    [2014-01-25 05:47] [PACMAN] installed util-linux (2.24-2)
    [2014-01-25 05:47] [PACMAN] installed xz (5.0.5-2)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] Initializing machine ID from random generator.
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] :: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
    [2014-01-25 05:47] [ALPM-SCRIPTLET] bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
    [2014-01-25 05:47] [PACMAN] installed systemd (208-10)
    [2014-01-25 05:47] [PACMAN] installed device-mapper (2.02.105-1)
    [2014-01-25 05:47] [PACMAN] installed popt (1.16-7)
    [2014-01-25 05:47] [PACMAN] installed cryptsetup (1.6.3-2)
    [2014-01-25 05:47] [PACMAN] installed dhcpcd (6.1.0-1)
    [2014-01-25 05:47] [PACMAN] installed diffutils (3.3-1)
    [2014-01-25 05:47] [PACMAN] installed e2fsprogs (1.42.8-2)
    [2014-01-25 05:47] [PACMAN] installed file (5.16-1)
    [2014-01-25 05:47] [PACMAN] installed findutils (4.4.2-5)
    [2014-01-25 05:47] [PACMAN] installed mpfr (3.1.2.p5-1)
    [2014-01-25 05:47] [PACMAN] installed gawk (4.1.0-2)
    [2014-01-25 05:47] [PACMAN] installed libunistring (0.9.3-6)
    [2014-01-25 05:47] [PACMAN] installed gettext (0.18.3.2-1)
    [2014-01-25 05:47] [PACMAN] installed grep (2.16-1)
    [2014-01-25 05:47] [PACMAN] installed less (458-1)
    [2014-01-25 05:47] [PACMAN] installed gzip (1.6-1)
    [2014-01-25 05:47] [PACMAN] installed inetutils (1.9.2-1)
    [2014-01-25 05:47] [PACMAN] installed iptables (1.4.21-1)
    [2014-01-25 05:47] [PACMAN] installed iproute2 (3.12.0-1)
    [2014-01-25 05:47] [PACMAN] installed sysfsutils (2.1.0-8)
    [2014-01-25 05:47] [PACMAN] installed iputils (20121221-3)
    [2014-01-25 05:47] [PACMAN] installed jfsutils (1.1.15-4)
    [2014-01-25 05:47] [PACMAN] installed licenses (20130203-1)
    [2014-01-25 05:47] [PACMAN] installed linux-firmware (20140123.418320b-1)
    [2014-01-25 05:47] [PACMAN] installed mkinitcpio-busybox (1.21.1-2)
    [2014-01-25 05:47] [PACMAN] installed lzo2 (2.06-3)
    [2014-01-25 05:47] [PACMAN] installed libarchive (3.1.2-4)
    [2014-01-25 05:47] [PACMAN] installed mkinitcpio (16-2)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-01-25 05:47] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 05:47] [PACMAN] installed linux (3.12.8-1)
    [2014-01-25 05:47] [PACMAN] installed logrotate (3.8.7-1)
    [2014-01-25 05:47] [PACMAN] installed lvm2 (2.02.105-1)
    [2014-01-25 05:47] [PACMAN] installed groff (1.22.2-5)
    [2014-01-25 05:47] [PACMAN] installed libpipeline (1.2.6-1)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] it's recommended to create an initial
    [2014-01-25 05:47] [ALPM-SCRIPTLET] database running as root:
    [2014-01-25 05:47] [ALPM-SCRIPTLET] "/usr/bin/mandb --quiet"
    [2014-01-25 05:47] [PACMAN] installed man-db (2.6.5-1)
    [2014-01-25 05:47] [PACMAN] installed man-pages (3.56-1)
    [2014-01-25 05:47] [PACMAN] installed mdadm (3.3-2)
    [2014-01-25 05:47] [PACMAN] installed nano (2.2.6-2)
    [2014-01-25 05:47] [PACMAN] installed openresolv (3.5.6-1)
    [2014-01-25 05:47] [PACMAN] installed netctl (1.4-2)
    [2014-01-25 05:47] [PACMAN] installed sed (4.2.2-3)
    [2014-01-25 05:47] [PACMAN] installed ca-certificates (20130906-1)
    [2014-01-25 05:47] [PACMAN] installed libsasl (2.1.26-6)
    [2014-01-25 05:47] [PACMAN] installed libldap (2.4.38-1)
    [2014-01-25 05:47] [PACMAN] installed keyutils (1.5.8-1)
    [2014-01-25 05:47] [PACMAN] installed krb5 (1.11.4-1)
    [2014-01-25 05:47] [PACMAN] installed libssh2 (1.4.3-2)
    [2014-01-25 05:47] [PACMAN] installed curl (7.34.0-3)
    [2014-01-25 05:47] [PACMAN] installed pth (2.0.7-5)
    [2014-01-25 05:47] [PACMAN] installed libksba (1.3.0-1)
    [2014-01-25 05:47] [PACMAN] installed libassuan (2.1.1-1)
    [2014-01-25 05:47] [PACMAN] installed pinentry (0.8.3-1)
    [2014-01-25 05:47] [PACMAN] installed dirmngr (1.1.1-2)
    [2014-01-25 05:47] [PACMAN] installed gnupg (2.0.22-2)
    [2014-01-25 05:47] [PACMAN] installed gpgme (1.4.3-1)
    [2014-01-25 05:47] [PACMAN] installed pacman-mirrorlist (20140107-1)
    [2014-01-25 05:47] [PACMAN] installed archlinux-keyring (20140124-1)
    [2014-01-25 05:47] [PACMAN] installed pacman (4.1.2-5)
    [2014-01-25 05:47] [PACMAN] installed pciutils (3.2.0-4)
    [2014-01-25 05:47] [PACMAN] installed pcmciautils (018-7)
    [2014-01-25 05:47] [PACMAN] installed procps-ng (3.3.9-2)
    [2014-01-25 05:47] [PACMAN] installed psmisc (22.20-1)
    [2014-01-25 05:47] [PACMAN] installed reiserfsprogs (3.6.24-1)
    [2014-01-25 05:47] [PACMAN] installed s-nail (14.5.2-1)
    [2014-01-25 05:47] [PACMAN] installed systemd-sysvcompat (208-10)
    [2014-01-25 05:47] [PACMAN] installed tar (1.27.1-1)
    [2014-01-25 05:47] [PACMAN] installed texinfo (5.2-2)
    [2014-01-25 05:47] [PACMAN] installed libusbx (1.0.17-1)
    [2014-01-25 05:47] [PACMAN] installed usbutils (007-1)
    [2014-01-25 05:47] [PACMAN] installed vi (1:050325-3)
    [2014-01-25 05:47] [PACMAN] installed which (2.20-6)
    [2014-01-25 05:47] [PACMAN] installed xfsprogs (3.1.11-2)
    [2014-01-25 05:47] [PACMAN] installed m4 (1.4.17-1)
    [2014-01-25 05:47] [PACMAN] installed autoconf (2.69-1)
    [2014-01-25 05:47] [PACMAN] installed automake (1.14.1-1)
    [2014-01-25 05:47] [PACMAN] installed binutils (2.24-1)
    [2014-01-25 05:47] [PACMAN] installed bison (3.0.2-1)
    [2014-01-25 05:47] [PACMAN] installed fakeroot (1.20-1)
    [2014-01-25 05:47] [PACMAN] installed flex (2.5.37-1)
    [2014-01-25 05:47] [PACMAN] installed libmpc (1.0.1-2)
    [2014-01-25 05:47] [PACMAN] installed isl (0.12.2-1)
    [2014-01-25 05:47] [PACMAN] installed cloog (0.18.1-2)
    [2014-01-25 05:47] [PACMAN] installed gcc (4.8.2-7)
    [2014-01-25 05:47] [PACMAN] installed libltdl (2.4.2-12)
    [2014-01-25 05:47] [PACMAN] installed libtool (2.4.2-12)
    [2014-01-25 05:47] [PACMAN] installed gc (7.2.d-2)
    [2014-01-25 05:47] [PACMAN] installed guile (2.0.9-1)
    [2014-01-25 05:47] [PACMAN] installed make (4.0-2)
    [2014-01-25 05:47] [PACMAN] installed patch (2.7.1-2)
    [2014-01-25 05:47] [PACMAN] installed pkg-config (0.28-1)
    [2014-01-25 05:47] [PACMAN] installed sudo (1.8.9.p4-1)
    [2014-01-25 05:54] [PACMAN] Running 'pacman -S sudo'
    [2014-01-25 05:54] [PACMAN] reinstalled sudo (1.8.9.p4-1)
    [2014-01-25 05:57] [PACMAN] Running 'pacman -S gummiboot'
    [2014-01-25 05:57] [ALPM-SCRIPTLET] Copied /usr/lib/gummiboot/gummibootx64.efi to /boot/EFI/gummiboot/gummibootx64.efi.
    [2014-01-25 05:57] [ALPM-SCRIPTLET] Created EFI boot entry "Linux Boot Manager".
    [2014-01-25 05:57] [ALPM-SCRIPTLET] :: Run '/usr/bin/gummiboot install' to make gummiboot your default bootloader
    [2014-01-25 05:57] [PACMAN] installed gummiboot (41-1)
    [2014-01-25 06:14] [PACMAN] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils xf86-input-synaptics nvidia acpid'
    [2014-01-25 06:15] [PACMAN] installed xproto (7.0.25-1)
    [2014-01-25 06:15] [PACMAN] installed libxdmcp (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed libpng (1.6.7-1)
    [2014-01-25 06:15] [PACMAN] installed freetype2 (2.5.2-1)
    [2014-01-25 06:15] [PACMAN] installed libfontenc (1.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed fontsproto (2.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxfont (1.4.7-1)
    [2014-01-25 06:15] [PACMAN] installed libpciaccess (0.13.2-2)
    [2014-01-25 06:15] [PACMAN] installed libdrm (2.4.52-1)
    [2014-01-25 06:15] [PACMAN] installed pixman (0.32.4-1)
    [2014-01-25 06:15] [PACMAN] installed libxau (1.0.8-2)
    [2014-01-25 06:15] [PACMAN] installed xkeyboard-config (2.10.1-1)
    [2014-01-25 06:15] [PACMAN] installed xcb-proto (1.10-1)
    [2014-01-25 06:15] [PACMAN] installed libxcb (1.10-1)
    [2014-01-25 06:15] [PACMAN] installed kbproto (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed libx11 (1.6.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxkbfile (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xkbcomp (1.2.4-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-setxkbmap (1.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-encodings (1.0.4-3)
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-alias (1.0.3-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-bdftopcf (1.0.4-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-mkfontscale (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-mkfontdir (1.0.7-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-font-util (1.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-font-utils (7.6-3)
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Fontconfig configuration is done via /etc/fonts/conf.avail and conf.d.
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Read /etc/fonts/conf.d/README for more information.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Configuration via /etc/fonts/local.conf is still possible,
    [2014-01-25 06:15] [ALPM-SCRIPTLET] but is no longer recommended for options available in conf.avail.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Main systemwide configuration should be done by symlinks
    [2014-01-25 06:15] [ALPM-SCRIPTLET] (especially for autohinting, sub-pixel and lcdfilter):
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] cd /etc/fonts/conf.d
    [2014-01-25 06:15] [ALPM-SCRIPTLET] ln -s ../conf.avail/XX-foo.conf
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Check also https://wiki.archlinux.org/index.php/Font_Configuration
    [2014-01-25 06:15] [ALPM-SCRIPTLET] and https://wiki.archlinux.org/index.php/Fonts.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] updating font cache... done.
    [2014-01-25 06:15] [PACMAN] installed fontconfig (2.11.0-1)
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Updating font cache... done.
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-misc (1.0.1-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-server-common (1.15.0-5)
    [2014-01-25 06:15] [PACMAN] installed mtdev (1.1.4-1)
    [2014-01-25 06:15] [PACMAN] installed xf86-input-evdev (2.8.2-2)
    [2014-01-25 06:15] [PACMAN] installed libxshmfence (1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-server (1.15.0-5)
    [2014-01-25 06:15] [PACMAN] installed xextproto (7.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed libxext (1.3.2-1)
    [2014-01-25 06:15] [PACMAN] installed libice (1.0.8-2)
    [2014-01-25 06:15] [PACMAN] installed libsm (1.2.2-2)
    [2014-01-25 06:15] [PACMAN] installed libxt (1.1.4-1)
    [2014-01-25 06:15] [PACMAN] installed libxmu (1.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xauth (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xinit (1.3.3-3)
    [2014-01-25 06:15] [PACMAN] installed xorg-iceauth (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-sessreg (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xcmsdb (1.0.4-1)
    [2014-01-25 06:15] [PACMAN] installed xcb-util (0.3.9-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xbacklight (1.2.0-1)
    [2014-01-25 06:15] [PACMAN] installed xf86vidmodeproto (2.3.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxxf86vm (1.1.3-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xgamma (1.0.5-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xhost (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed inputproto (2.3-1)
    [2014-01-25 06:15] [PACMAN] installed libxi (1.7.2-1)
    [2014-01-25 06:15] [PACMAN] installed renderproto (0.11.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxrender (0.9.8-1)
    [2014-01-25 06:15] [PACMAN] installed randrproto (1.4.0-1)
    [2014-01-25 06:15] [PACMAN] installed libxrandr (1.4.2-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrandr (1.4.1-1)
    [2014-01-25 06:15] [PACMAN] installed xineramaproto (1.2.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxinerama (1.1.3-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-xinput (1.6.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xmodmap (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed mcpp (2.7.2-4)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrdb (1.1.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrefresh (1.0.5-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xset (1.2.3-1)
    [2014-01-25 06:15] [PACMAN] installed fixesproto (5.0-2)
    [2014-01-25 06:15] [PACMAN] installed libxfixes (5.0.1-1)
    [2014-01-25 06:15] [PACMAN] installed libxcursor (1.1.14-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xsetroot (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-server-utils (7.6-3)
    [2014-01-25 06:15] [PACMAN] installed recordproto (1.14.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxtst (1.2.2-1)
    [2014-01-25 06:15] [PACMAN] installed xf86-input-synaptics (1.7.3-1)
    [2014-01-25 06:15] [PACMAN] installed nvidia-utils (331.38-1)
    [2014-01-25 06:15] [PACMAN] installed nvidia-libgl (331.38-1)
    [2014-01-25 06:15] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 06:15] [PACMAN] installed nvidia (331.38-2)
    [2014-01-25 06:15] [PACMAN] installed acpid (2.0.21-1)
    [2014-01-25 06:19] [PACMAN] Running 'pacman -S dialog wpa_supplicant'
    [2014-01-25 06:19] [PACMAN] installed dialog (1:1.2_20140112-1)
    [2014-01-25 06:19] [PACMAN] installed libnl (3.2.23-1)
    [2014-01-25 06:19] [PACMAN] installed wpa_supplicant (2.0-4)
    [2014-01-25 06:21] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:26] [PACMAN] installed dconf (0.18.0-1)
    [2014-01-25 06:26] [PACMAN] installed atk (2.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed libvdpau (0.7-1)
    [2014-01-25 06:26] [PACMAN] installed wayland (1.4.0-1)
    [2014-01-25 06:26] [PACMAN] installed damageproto (1.2.1-2)
    [2014-01-25 06:26] [PACMAN] installed libxdamage (1.1.4-1)
    [2014-01-25 06:26] [PACMAN] installed elfutils (0.157-1)
    [2014-01-25 06:26] [PACMAN] installed llvm-libs (3.4-1)
    [2014-01-25 06:26] [PACMAN] installed mesa (10.0.2-1)
    [2014-01-25 06:26] [PACMAN] installed cairo (1.12.16-1)
    [2014-01-25 06:26] [PACMAN] installed libjpeg-turbo (1.3.0-4)
    [2014-01-25 06:26] [PACMAN] installed libtiff (4.0.3-4)
    [2014-01-25 06:26] [PACMAN] installed jasper (1.900.1-10)
    [2014-01-25 06:26] [PACMAN] installed gdk-pixbuf2 (2.30.3-1)
    [2014-01-25 06:26] [PACMAN] installed hicolor-icon-theme (0.12-2)
    [2014-01-25 06:26] [PACMAN] installed gtk-update-icon-cache (2.24.22-1)
    [2014-01-25 06:26] [PACMAN] installed libdaemon (0.14-2)
    [2014-01-25 06:26] [PACMAN] installed avahi (0.6.31-11)
    [2014-01-25 06:26] [PACMAN] installed libcups (1.7.1-3)
    [2014-01-25 06:26] [PACMAN] installed compositeproto (0.4.2-2)
    [2014-01-25 06:26] [PACMAN] installed libxcomposite (0.4.4-1)
    [2014-01-25 06:26] [PACMAN] installed libdatrie (0.2.6-1)
    [2014-01-25 06:26] [PACMAN] installed libthai (0.1.19-1)
    [2014-01-25 06:26] [PACMAN] installed libxft (2.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed graphite (1:1.2.4-1)
    [2014-01-25 06:26] [PACMAN] installed harfbuzz (0.9.24-1)
    [2014-01-25 06:26] [PACMAN] installed pango (1.36.1-1)
    [2014-01-25 06:26] [PACMAN] installed libxml2 (2.9.1-5)
    [2014-01-25 06:26] [PACMAN] installed shared-mime-info (1.2-1)
    [2014-01-25 06:26] [PACMAN] installed lcms2 (2.5-2)
    [2014-01-25 06:26] [PACMAN] installed libgusb (0.1.6-1)
    [2014-01-25 06:26] [PACMAN] installed nspr (4.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed js (17.0.0-1)
    [2014-01-25 06:26] [PACMAN] installed polkit (0.112-1)
    [2014-01-25 06:26] [PACMAN] installed shared-color-profiles (0.1.5-1)
    [2014-01-25 06:26] [PACMAN] installed sqlite (3.8.2-1)
    [2014-01-25 06:26] [PACMAN] installed colord (1.0.4-1)
    [2014-01-25 06:26] [PACMAN] installed at-spi2-core (2.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed at-spi2-atk (2.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed libxkbcommon (0.3.2-1)
    [2014-01-25 06:26] [PACMAN] installed gtk3 (3.10.6-1)
    [2014-01-25 06:26] [PACMAN] installed gsettings-desktop-schemas (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed desktop-file-utils (0.22-1)
    [2014-01-25 06:26] [PACMAN] installed baobab (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed cogl (1.16.2-1)
    [2014-01-25 06:26] [PACMAN] installed json-glib (0.16.2-1)
    [2014-01-25 06:26] [PACMAN] installed libevdev (0.6-1)
    [2014-01-25 06:26] [PACMAN] installed clutter (1.16.4-1)
    [2014-01-25 06:26] [PACMAN] installed gstreamer (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed orc (0.4.18-1)
    [2014-01-25 06:26] [PACMAN] installed videoproto (2.3.2-1)
    [2014-01-25 06:26] [PACMAN] installed libxv (1.0.10-1)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-base-libs (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed sdl (1.2.15-5)
    [2014-01-25 06:26] [PACMAN] installed libdv (1.0.0-5)
    [2014-01-25 06:26] [PACMAN] installed mjpegtools (2.0.0-4)
    [2014-01-25 06:26] [PACMAN] installed alsa-lib (1.0.27.2-1)
    [2014-01-25 06:26] [PACMAN] installed libtasn1 (3.4-1)
    [2014-01-25 06:26] [PACMAN] installed nettle (2.7.1-1)
    [2014-01-25 06:26] [PACMAN] installed p11-kit (0.20.1-1)
    [2014-01-25 06:26] [PACMAN] installed gnutls (3.2.9-1)
    [2014-01-25 06:26] [PACMAN] installed gsm (1.0.13-7)
    [2014-01-25 06:26] [PACMAN] installed lame (3.99.5-2)
    [2014-01-25 06:26] [PACMAN] installed fribidi (0.19.6-1)
    [2014-01-25 06:26] [PACMAN] installed recode (3.6-8)
    [2014-01-25 06:26] [PACMAN] installed enca (1.15-1)
    [2014-01-25 06:26] [PACMAN] installed libass (0.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed libbluray (0.5.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmodplug (0.8.8.4-2)
    [2014-01-25 06:26] [PACMAN] installed libasyncns (0.8-5)
    [2014-01-25 06:26] [PACMAN] installed libogg (1.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed flac (1.3.0-1)
    [2014-01-25 06:26] [PACMAN] installed libvorbis (1.3.4-1)
    [2014-01-25 06:26] [PACMAN] installed libsndfile (1.0.25-3)
    [2014-01-25 06:26] [PACMAN] installed json-c (0.11-1)
    [2014-01-25 06:26] [PACMAN] installed libpulse (4.0-6)
    [2014-01-25 06:26] [PACMAN] installed libtheora (1.1.1-3)
    [2014-01-25 06:26] [PACMAN] installed libva (1.2.1-1)
    [2014-01-25 06:26] [PACMAN] installed libvpx (1.3.0-1)
    [2014-01-25 06:26] [PACMAN] installed opencore-amr (0.1.3-1)
    [2014-01-25 06:26] [PACMAN] installed openjpeg (1.5.1-1)
    [2014-01-25 06:26] [PACMAN] installed opus (1.1-1)
    [2014-01-25 06:26] [PACMAN] installed rtmpdump (20131205-1)
    [2014-01-25 06:26] [PACMAN] installed schroedinger (1.0.11-2)
    [2014-01-25 06:26] [PACMAN] installed speex (1.2rc1-4)
    [2014-01-25 06:26] [PACMAN] installed v4l-utils (1.0.0-2)
    [2014-01-25 06:26] [PACMAN] installed x264 (20131030-2)
    [2014-01-25 06:26] [PACMAN] installed xvidcore (1.3.2-3)
    [2014-01-25 06:26] [PACMAN] installed ffmpeg (1:2.1.3-1)
    [2014-01-25 06:26] [PACMAN] installed chromaprint (1.1-1)
    [2014-01-25 06:26] [PACMAN] installed libmms (0.6.2-1)
    [2014-01-25 06:26] [PACMAN] installed faad2 (2.7-4)
    [2014-01-25 06:26] [PACMAN] installed mpg123 (1.17.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmp4v2 (2.0.0-3)
    [2014-01-25 06:26] [PACMAN] installed faac (1.28-5)
    [2014-01-25 06:26] [PACMAN] installed celt (0.11.3-2)
    [2014-01-25 06:26] [PACMAN] installed libdca (0.0.5-4)
    [2014-01-25 06:26] [PACMAN] installed soundtouch (1.7.1-1)
    [2014-01-25 06:26] [PACMAN] installed spandsp (0.0.6pre21-2)
    [2014-01-25 06:26] [PACMAN] installed libdvdread (4.2.0-1)
    [2014-01-25 06:26] [PACMAN] installed libdvdnav (4.2.0-2)
    [2014-01-25 06:26] [PACMAN] installed libgme (0.6.0-2)
    [2014-01-25 06:26] [PACMAN] installed neon (0.30.0-1)
    [2014-01-25 06:26] [PACMAN] installed fftw (3.3.3-2)
    [2014-01-25 06:26] [PACMAN] installed libofa (0.9.3-5)
    [2014-01-25 06:26] [PACMAN] installed libsamplerate (0.1.8-3)
    [2014-01-25 06:26] [PACMAN] installed jack (0.121.3-7)
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > To use FluidSynth as a daemon copy the service file from:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] /usr/lib/systemd/system/fluidsynth.service
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > to:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] /etc/systemd/system/multi-user.target.wants/
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > and then edit accordingly.
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > PulseAudio output when running as a daemon is known to be
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > problematic. See the following bulletin board post:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?id=135092
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [PACMAN] installed fluidsynth (1.1.6-2)
    [2014-01-25 06:26] [PACMAN] installed giflib (5.0.5-1)
    [2014-01-25 06:26] [PACMAN] installed libwebp (0.3.1-3)
    [2014-01-25 06:26] [PACMAN] installed libsrtp (15.1c9bd90-2)
    [2014-01-25 06:26] [PACMAN] installed wildmidi (0.2.3.5-2)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-bad (1.2.2-2)
    [2014-01-25 06:26] [PACMAN] installed clutter-gst (2.0.10-1)
    [2014-01-25 06:26] [PACMAN] installed clutter-gtk (1.4.4-4)
    [2014-01-25 06:26] [PACMAN] installed dbus-glib (0.100.2-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-glib (0.22.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgee (0.12.0-1)
    [2014-01-25 06:26] [PACMAN] installed libxslt (1.1.28-3)
    [2014-01-25 06:26] [PACMAN] installed libproxy (0.4.11-2)
    [2014-01-25 06:26] [PACMAN] installed glib-networking (2.38.2-1)
    [2014-01-25 06:26] [PACMAN] installed libsoup (2.44.2-1)
    [2014-01-25 06:26] [ALPM-SCRIPTLET] ==> aspell comes with no default dictionary
    [2014-01-25 06:26] [PACMAN] installed aspell (0.60.6.1-1)
    [2014-01-25 06:26] [PACMAN] installed hunspell (1.3.2-3)
    [2014-01-25 06:26] [PACMAN] installed hspell (1.2-1)
    [2014-01-25 06:26] [PACMAN] installed enchant (1.6.0-4)
    [2014-01-25 06:26] [PACMAN] installed geoclue (0.12.99-1)
    [2014-01-25 06:26] [PACMAN] installed libsecret (0.16-2)
    [2014-01-25 06:26] [PACMAN] installed icu (52.1-1)
    [2014-01-25 06:26] [PACMAN] installed harfbuzz-icu (0.9.24-1)
    [2014-01-25 06:26] [PACMAN] installed webkitgtk (2.2.4-1)
    [2014-01-25 06:26] [PACMAN] installed libnotify (0.7.6-1)
    [2014-01-25 06:26] [PACMAN] installed rest (0.7.90-2)
    [2014-01-25 06:26] [PACMAN] installed gcr (3.10.1-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-online-accounts (3.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed nss (3.15.3.1-1)
    [2014-01-25 06:26] [PACMAN] installed perl-xml-parser (2.41-4)
    [2014-01-25 06:26] [PACMAN] installed perl-xml-simple (2.20-1)
    [2014-01-25 06:26] [PACMAN] installed icon-naming-utils (0.8.90-2)
    [2014-01-25 06:26] [PACMAN] installed libcroco (0.6.8-1)
    [2014-01-25 06:26] [PACMAN] installed librsvg (1:2.40.1-3)
    [2014-01-25 06:26] [PACMAN] installed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgweather (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed libical (1.0-3)
    [2014-01-25 06:26] [PACMAN] installed liboauth (1.0.1-1)
    [2014-01-25 06:26] [PACMAN] installed libgdata (0.14.1-1)
    [2014-01-25 06:26] [PACMAN] installed evolution-data-server (3.10.3-1)
    [2014-01-25 06:26] [PACMAN] installed zeitgeist (0.9.14-1)
    [2014-01-25 06:26] [PACMAN] installed libtracker-sparql (0.16.4-1)
    [2014-01-25 06:26] [PACMAN] installed folks (0.9.6-1)
    [2014-01-25 06:26] [PACMAN] installed iso-codes (3.44-1)
    [2014-01-25 06:26] [PACMAN] installed tdb (1.2.12-1)
    [2014-01-25 06:26] [PACMAN] installed sound-theme-freedesktop (0.8-1)
    [2014-01-25 06:26] [PACMAN] installed libcanberra (0.30-4)
    [2014-01-25 06:26] [PACMAN] installed libnice (0.1.4-1)
    [2014-01-25 06:26] [PACMAN] installed farstream (0.2.3-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-farstream (0.6.0-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-logger (0.8.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgnome-keyring (3.10.1-2)
    [2014-01-25 06:26] [PACMAN] installed python2 (2.7.6-1)
    [2014-01-25 06:26] [PACMAN] installed libplist (1.10-1)
    [2014-01-25 06:26] [PACMAN] installed usbmuxd (1.0.8-2)
    [2014-01-25 06:26] [PACMAN] installed libimobiledevice (1.1.5-2)
    [2014-01-25 06:26] [PACMAN] installed upower (0.9.23-2)
    [2014-01-25 06:26] [PACMAN] installed libpcap (1.5.1-1)
    [2014-01-25 06:26] [PACMAN] installed ppp (2.4.5-8)
    [2014-01-25 06:26] [PACMAN] installed libqmi (1.8.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmbim (1.4.0-1)
    [2014-01-25 06:26] [PACMAN] installed modemmanager (1.0.0-2)
    [2014-01-25 06:26] [PACMAN] installed networkmanager (0.9.8.8-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-mission-control (5.16.0-1)
    [2014-01-25 06:26] [PACMAN] installed geoclue2 (1.99.4-1)
    [2014-01-25 06:26] [PACMAN] installed geocode-glib (3.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed cdparanoia (10.2-5)
    [2014-01-25 06:26] [PACMAN] installed libvisual (0.4.0-4)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-base (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed wavpack (4.70.0-2)
    [2014-01-25 06:26] [PACMAN] installed gpm (1.20.7-4)
    [2014-01-25 06:26] [PACMAN] installed aalib (1.4rc5-10)
    [2014-01-25 06:26] [PACMAN] installed taglib (1.9.1-1)
    [2014-01-25 06:26] [PACMAN] installed libshout (1:2.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed libid3tag (0.15.1b-8)
    [2014-01-25 06:26] [PACMAN] installed imlib2 (1.4.5-6)
    [2014-01-25 06:26] [PACMAN] installed libcaca (0.99.beta18-2)
    [2014-01-25 06:26] [PACMAN] installed libraw1394 (2.1.0-2)
    [2014-01-25 06:26] [PACMAN] installed libavc1394 (0.5.4-2)
    [2014-01-25 06:26] [PACMAN] installed libiec61883 (1.2.0-4)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-good (1.2.2-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-video-effects (0.4.0-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed cheese (3.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed libchamplain (0.12.5-2)
    [2014-01-25 06:26] [ALPM-SCRIPTLET] To use Empathy you need to install at least one Telepathy connection manager.
    [2014-01-25 06:26] [PACMAN] installed empathy (3.10.3-1)
    [2014-01-25 06:26] [PACMAN] installed libexif (0.6.21-2)
    [2014-01-25 06:26] [PACMAN] installed exempi (2.2.1-2)
    [2014-01-25 06:26] [PACMAN] installed python2-markupsafe (0.18-2)
    [2014-01-25 06:26] [PACMAN] installed python2-beaker (1.6.4-1)
    [2014-01-25 06:26] [PACMAN] installed python2-mako (0.9.1-1)
    [2014-01-25 06:26] [PACMAN] installed gobject-introspection (1.38.0-1)
    [2014-01-25 06:26] [PACMAN] installed libpeas (1.9.0-1)
    [2014-01-25 06:26] [PACMAN] installed eog (3.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed startup-notification (0.12-4)
    [2014-01-25 06:26] [PACMAN] installed libxres (1.0.7-1)
    [2014-01-25 06:26] [PACMAN] installed libwnck3 (3.4.7-1)
    [2014-01-25 06:27] [PACMAN] installed cantarell-fonts (0.0.15-1)
    [2014-01-25 06:27] [PACMAN] installed ttf-dejavu (2.34-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed epiphany (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed libgxps (0.2.2-3)
    [2014-01-25 06:27] [PACMAN] installed libpaper (1.1.24-7)
    [2014-01-25 06:27] [PACMAN] installed ghostscript (9.10-3)
    [2014-01-25 06:27] [PACMAN] installed libspectre (0.2.7-1)
    [2014-01-25 06:27] [ALPM-SCRIPTLET] Updating font cache... done.
    [2014-01-25 06:27] [PACMAN] installed gsfonts (1.0.7pre44-4)
    [2014-01-25 06:27] [PACMAN] installed poppler (0.24.5-1)
    [2014-01-25 06:27] [PACMAN] installed poppler-glib (0.24.5-1)
    [2014-01-25 06:27] [PACMAN] installed djvulibre (3.5.25.3-1)
    [2014-01-25 06:27] [PACMAN] installed libxpm (3.5.11-1)
    [2014-01-25 06:27] [PACMAN] installed libxaw (1.0.12-1)
    [2014-01-25 06:27] [PACMAN] installed t1lib (5.1.2-4)
    [2014-01-25 06:27] [PACMAN] installed evince (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed accountsservice (0.6.35-2)
    [2014-01-25 06:27] [PACMAN] installed python2-cairo (1.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed pygobject-devel (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python2-gobject (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python2-atspi (2.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed libxklavier (5.3-1)
    [2014-01-25 06:27] [PACMAN] installed caribou (0.4.13-1)
    [2014-01-25 06:27] [PACMAN] installed gjs (1.38.1-1)
    [2014-01-25 06:27] [PACMAN] installed bluez (5.14-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-bluetooth (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-menus (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-session (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libcanberra-pulse (0.30-4)
    [2014-01-25 06:27] [PACMAN] installed libwacom (0.8-1)
    [2014-01-25 06:27] [PACMAN] installed rtkit (0.11-4)
    [2014-01-25 06:27] [PACMAN] installed webrtc-audio-processing (0.1-1)
    [2014-01-25 06:27] [PACMAN] installed sbc (1.1-1)
    [2014-01-25 06:27] [ALPM-SCRIPTLET] >>> See the wiki at http://wiki.archlinux.org/index.php/PulseAudio for details
    [2014-01-25 06:27] [ALPM-SCRIPTLET] on configuring your system for PulseAudio.
    [2014-01-25 06:27] [ALPM-SCRIPTLET]
    [2014-01-25 06:27] [ALPM-SCRIPTLET] >>> Make sure to install pulseaudio-alsa to configure ALSA for PulseAudio.
    [2014-01-25 06:27] [PACMAN] installed pulseaudio (4.0-6)
    [2014-01-25 06:27] [PACMAN] installed alsa-plugins (1.0.27-2)
    [2014-01-25 06:27] [PACMAN] installed pulseaudio-alsa (2-2)
    [2014-01-25 06:27] [PACMAN] installed libibus (1.5.5-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:27] [PACMAN] installed libgdm (3.10.0.1-2)
    [2014-01-25 06:27] [PACMAN] installed zenity (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed mutter (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed mutter-wayland (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed mobile-broadband-provider-info (20120614-1)
    [2014-01-25 06:27] [PACMAN] installed network-manager-applet (0.9.8.8-1)
    [2014-01-25 06:27] [PACMAN] installed unzip (6.0-6)
    [2014-01-25 06:27] [PACMAN] installed gnome-shell (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed gdm (3.10.0.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-calculator (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-contacts (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed cups-pk-helper (0.2.5-1)
    [2014-01-25 06:27] [PACMAN] installed libgtop (2.28.5-1)
    [2014-01-25 06:27] [PACMAN] installed libpwquality (1.2.3-1)
    [2014-01-25 06:27] [PACMAN] installed vte-common (0.34.9-1)
    [2014-01-25 06:27] [PACMAN] installed vte3 (0.34.9-1)
    [2014-01-25 06:27] [PACMAN] installed exiv2 (0.23-2)
    [2014-01-25 06:27] [PACMAN] installed mash (0.2.0-3)
    [2014-01-25 06:27] [PACMAN] installed shared-color-targets (0.1.2-1)
    [2014-01-25 06:27] [PACMAN] installed colord-gtk (0.1.25-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-color-manager (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libcap-ng (0.7.3-1)
    [2014-01-25 06:27] [PACMAN] installed talloc (2.0.8-2)
    [2014-01-25 06:27] [PACMAN] installed libbsd (0.6.0-2)
    [2014-01-25 06:27] [PACMAN] installed libwbclient (4.1.4-1)
    [2014-01-25 06:27] [PACMAN] installed cifs-utils (6.2-1)
    [2014-01-25 06:27] [PACMAN] installed tevent (0.9.19-1)
    [2014-01-25 06:27] [PACMAN] installed ldb (1.1.16-1)
    [2014-01-25 06:27] [PACMAN] installed smbclient (4.1.4-1)
    [2014-01-25 06:27] [PACMAN] installed libgnomekbd (3.6.0-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-control-center (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-dictionary (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed libatasmart (0.19-2)
    [2014-01-25 06:27] [PACMAN] installed udisks2 (2.1.1-3)
    [2014-01-25 06:27] [PACMAN] installed gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-keyring (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-screenshot (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-system-log (3.9.90-1)
    [2014-01-25 06:27] [PACMAN] installed libsigc++ (2.3.1-1)
    [2014-01-25 06:27] [PACMAN] installed glibmm (2.38.1-1)
    [2014-01-25 06:27] [PACMAN] installed cairomm (1.10.0-3)
    [2014-01-25 06:27] [PACMAN] installed pangomm (2.34.0-1)
    [2014-01-25 06:27] [PACMAN] installed atkmm (2.22.7-1)
    [2014-01-25 06:27] [PACMAN] installed gtkmm3 (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-terminal (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed yelp-xsl (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed yelp (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-user-docs (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed apr (1.5.0-1)
    [2014-01-25 06:27] [PACMAN] installed unixodbc (2.3.2-1)
    [2014-01-25 06:27] [PACMAN] installed apr-util (1.5.3-1)
    [2014-01-25 06:27] [PACMAN] installed apache (2.2.25-1)
    [2014-01-25 06:27] [PACMAN] installed mod_dnssd (0.6-4)
    [2014-01-25 06:27] [PACMAN] installed gnome-user-share (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed grilo (0.2.7-1)
    [2014-01-25 06:27] [PACMAN] installed grilo-plugins (0.2.9-3)
    [2014-01-25 06:27] [PACMAN] installed gucharmap (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed mousetweaks (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed fuse (2.9.3-2)
    [2014-01-25 06:27] [PACMAN] installed libcddb (1.3.2-4)
    [2014-01-25 06:27] [PACMAN] installed libcdio (0.92-1)
    [2014-01-25 06:27] [PACMAN] installed libcdio-paranoia (10.2+0.90+1-2)
    [2014-01-25 06:27] [PACMAN] installed gvfs (1.18.3-3)
    [2014-01-25 06:27] [PACMAN] installed nautilus-sendto (3.8.1-1)
    [2014-01-25 06:27] [PACMAN] installed libnautilus-extension (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed nautilus (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libmusicbrainz5 (5.0.1-1)
    [2014-01-25 06:27] [PACMAN] installed gtksourceview3 (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed sushi (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gmime (2.6.18-1)
    [2014-01-25 06:27] [PACMAN] installed totem-plparser (3.10.0-4)
    [2014-01-25 06:27] [PACMAN] installed python (3.3.3-1)
    [2014-01-25 06:27] [PACMAN] installed python-cairo (1.10.0-3)
    [2014-01-25 06:27] [PACMAN] installed python-gobject (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python-xdg (0.25-1)
    [2014-01-25 06:27] [PACMAN] installed totem (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed totem-plugin (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libgsf (1.14.28-1)
    [2014-01-25 06:27] [PACMAN] installed tracker (0.16.4-1)
    [2014-01-25 06:27] [PACMAN] installed vino (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed xdg-user-dirs (0.15-1)
    [2014-01-25 06:27] [PACMAN] installed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:28] [PACMAN] Running 'pacman -S gnome-extra'
    [2014-01-25 06:32] [PACMAN] installed accerciser (3.8.2-1)
    [2014-01-25 06:32] [PACMAN] installed gconf (3.2.6-3)
    [2014-01-25 06:32] [ALPM-SCRIPTLET]
    [2014-01-25 06:32] [ALPM-SCRIPTLET] (gconftool-2:5179): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
    [2014-01-25 06:32] [ALPM-SCRIPTLET] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    [2014-01-25 06:32] [PACMAN] installed aisleriot (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gdl (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed libanjuta (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed autogen (5.18.2-1)
    [2014-01-25 06:32] [PACMAN] installed devhelp (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed glade (3.16.1-1)
    [2014-01-25 06:32] [PACMAN] installed libaio (0.3.109-7)
    [2014-01-25 06:32] [PACMAN] installed libmariadbclient (5.5.34-3)
    [2014-01-25 06:32] [PACMAN] installed postgresql-libs (9.3.2-4)
    [2014-01-25 06:32] [PACMAN] installed gd (2.1.0-2)
    [2014-01-25 06:32] [PACMAN] installed gts (0.7.6-3)
    [2014-01-25 06:32] [PACMAN] installed graphviz (2.34.0-3)
    [2014-01-25 06:32] [PACMAN] installed libgda (5.2.1-2)
    [2014-01-25 06:32] [PACMAN] installed serf (1.3.2-1)
    [2014-01-25 06:32] [PACMAN] installed subversion (1.8.5-1)
    [2014-01-25 06:32] [PACMAN] installed vala (0.22.1-1)
    [2014-01-25 06:32] [PACMAN] installed anjuta (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed bijiben (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed cdrkit (1.1.11-3)
    [2014-01-25 06:32] [PACMAN] installed libmad (0.15.1b-7)
    [2014-01-25 06:32] [PACMAN] installed libao (1.1.0-3)
    [2014-01-25 06:32] [PACMAN] installed cdrdao (1.2.3-6)
    [2014-01-25 06:32] [PACMAN] installed dvd+rw-tools (7.1-4)
    [2014-01-25 06:32] [PACMAN] installed brasero (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] reinstalled cheese (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed gtkhtml4 (4.6.6-1)
    [2014-01-25 06:32] [PACMAN] installed libpst (0.6.58-2)
    [2014-01-25 06:32] [PACMAN] installed libytnef (1.5-3)
    [2014-01-25 06:32] [PACMAN] installed evolution (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed p7zip (9.20.1-9)
    [2014-01-25 06:32] [PACMAN] installed file-roller (3.10.2.1-1)
    [2014-01-25 06:32] [PACMAN] installed five-or-more (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed four-in-a-row (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gedit (3.10.4-1)
    [2014-01-25 06:32] [PACMAN] installed glu (9.0.0-2)
    [2014-01-25 06:32] [PACMAN] installed gnome-chess (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-clocks (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] reinstalled gnome-color-manager (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-devel-docs (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed libzapojit (0.0.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-online-miners (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-documents (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-getting-started-docs (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-klotski (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-mahjongg (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-maps (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-mines (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed libdmapsharing (2.9.23-1)
    [2014-01-25 06:32] [PACMAN] installed python-dbus-common (1.2.0-2)
    [2014-01-25 06:32] [PACMAN] installed python-dbus (1.2.0-2)
    [2014-01-25 06:32] [PACMAN] installed gnome-music (3.10.1-2)
    [2014-01-25 06:32] [PACMAN] installed idnkit (1.0-3)
    [2014-01-25 06:32] [PACMAN] installed dnssec-anchors (20130320-1)
    [2014-01-25 06:32] [PACMAN] installed dnsutils (9.9.2.P2-1)
    [2014-01-25 06:32] [PACMAN] installed libidn (1.28-2)
    [2014-01-25 06:32] [PACMAN] installed whois (5.1.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-nettool (3.8.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-nibbles (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed babl (0.1.10-1)
    [2014-01-25 06:32] [PACMAN] installed gtk2 (2.24.22-1)
    [2014-01-25 06:32] [PACMAN] installed libspiro (20071029-3)
    [2014-01-25 06:32] [PACMAN] installed gegl (0.2.0-10)
    [2014-01-25 06:32] [PACMAN] installed gnome-photos (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-robots (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-sudoku (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-tetravex (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-weather (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed iagno (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed lightsoff (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] reinstalled nautilus-sendto (3.8.1-1)
    [2014-01-25 06:32] [PACMAN] installed python-atspi (2.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed dotconf (1.3-4)
    [2014-01-25 06:32] [PACMAN] installed speech-dispatcher (0.8-2)
    [2014-01-25 06:32] [PACMAN] installed liblouis (2.5.2-2)
    [2014-01-25 06:32] [PACMAN] installed tcl (8.6.1-1)
    [2014-01-25 06:32] [PACMAN] installed cython (0.20-1)
    [2014-01-25 06:32] [ALPM-SCRIPTLET] Please add your user to the brlapi group.
    [2014-01-25 06:32] [PACMAN] installed brltty (4.5-6)
    [2014-01-25 06:32] [PACMAN] installed orca (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed quadrapassel (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed gssdp (0.14.6-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp (0.20.9-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp-av (0.12.4-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp-dlna (0.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed xdg-utils (1.1.0.git20140109-1)
    [2014-01-25 06:33] [PACMAN] installed rygel (0.20.3-1)
    [2014-01-25 06:33] [PACMAN] installed seahorse (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed swell-foop (3.10.1-1)
    [2014-01-25 06:33] [PACMAN] installed tali (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed gtk-vnc (0.5.3-3)
    [2014-01-25 06:33] [PACMAN] installed celt0.5.1 (0.5.1.3-3)
    [2014-01-25 06:33] [PACMAN] installed libiscsi (1.7.0-2)
    [2014-01-25 06:33] [ALPM-SCRIPTLET] vde config files should be placed in /etc/vde, sample files are provided.
    [2014-01-25 06:33] [ALPM-SCRIPTLET] iptables and dhcpd sample files have been installed to '/usr/share/vde2'.
    [2014-01-25 06:33] [ALPM-SCRIPTLET] Merge those examples, if needed to the according config files.
    [2014-01-25 06:33] [PACMAN] installed vde2 (2.3.2-5)
    [2014-01-25 06:33] [PACMAN] installed libcacard (1.7.0-1)
    [2014-01-25 06:33] [PACMAN] installed usbredir (0.6-4)
    [2014-01-25 06:33] [PACMAN] installed spice-gtk3 (0.22-1)
    [2014-01-25 06:33] [PACMAN] installed vinagre (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:36] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:36] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-system-log (3.9.90-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-terminal (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled yelp (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-user-docs (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-user-share (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled grilo-plugins (0.2.9-3)
    [2014-01-25 06:36] [PACMAN] reinstalled gucharmap (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled mousetweaks (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled nautilus (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled sushi (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled totem (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled totem-plugin (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled tracker (0.16.4-1)
    [2014-01-25 06:36] [PACMAN] reinstalled vino (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:37] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:37] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:37] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-system-log (3.9.90-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-terminal (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled yelp (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-user-docs (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-user-share (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled grilo-plugins (0.2.9-3)
    [2014-01-25 06:37] [PACMAN] reinstalled gucharmap (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled mousetweaks (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled nautilus (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled sushi (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled totem (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled totem-plugin (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled tracker (0.16.4-1)
    [2014-01-25 06:37] [PACMAN] reinstalled vino (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:49] [PACMAN] Running 'pacman -R nvidia'
    [2014-01-25 06:49] [PACMAN] removed nvidia (331.38-2)
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S xserver-xorg-video-intel'
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S xserver'
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S video-intel'
    [2014-01-25 06:52] [PACMAN] Running 'pacman -S xf86-video-intel'
    [2014-01-25 06:52] [PACMAN] removed nvidia-libgl (331.38-1)
    [2014-01-25 06:52] [PACMAN] installed mesa-libgl (10.0.2-1)
    [2014-01-25 06:52] [PACMAN] installed intel-dri (10.0.2-1)
    [2014-01-25 06:52] [PACMAN] installed libxvmc (1.0.8-1)
    [2014-01-25 06:52] [PACMAN] installed glamor-egl (0.5.1.r258-1)
    [2014-01-25 06:52] [ALPM-SCRIPTLET] >>> This driver uses SNA as the default acceleration method. You can
    [2014-01-25 06:52] [ALPM-SCRIPTLET] fall back to UXA if you run into trouble or test experimental
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Glamor acceleration. To do so, save a file with the following
    [2014-01-25 06:52] [ALPM-SCRIPTLET] content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Section "Device"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Driver "intel"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Option "AccelMethod" "sna"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] #Option "AccelMethod" "uxa"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] #Option "AccelMethod" "glamor"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] EndSection
    [2014-01-25 06:52] [PACMAN] installed xf86-video-intel (2.99.907-2)
    [2014-01-25 06:58] [PACMAN] Running 'pacman -R xf86-video-intel'
    [2014-01-25 06:58] [PACMAN] removed xf86-video-intel (2.99.907-2)
    [2014-01-25 06:58] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 06:59] [PACMAN] Running 'pacman -R mesa-libgl'
    [2014-01-25 06:59] [PACMAN] Running 'pacman -R gnome'
    [2014-01-25 07:00] [PACMAN] Running 'pacman -R gnome-extra gnome'
    [2014-01-25 07:00] [PACMAN] Running 'pacman -R gnome-extra'
    [2014-01-25 07:01] [PACMAN] Running 'pacman -Rdd gnome gnome-extra'
    [2014-01-25 07:01] [PACMAN] removed vinagre (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed tali (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed swell-foop (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed seahorse (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed rygel (0.20.3-1)
    [2014-01-25 07:01] [PACMAN] removed quadrapassel (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed orca (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed lightsoff (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed iagno (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-weather (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-tetravex (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-sudoku (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-robots (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-photos (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-nibbles (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-nettool (3.8.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-music (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-mines (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-maps (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-mahjongg (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-klotski (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-getting-started-docs (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-documents (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-devel-docs (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-clocks (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-chess (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gedit (3.10.4-1)
    [2014-01-25 07:01] [PACMAN] removed four-in-a-row (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed five-or-more (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed file-roller (3.10.2.1-1)
    [2014-01-25 07:01] [PACMAN] removed evolution (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed brasero (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed bijiben (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed anjuta (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed devhelp (3.10.0-1)
    [2014-01-25 07:01] [ALPM-SCRIPTLET]
    [2014-01-25 07:01] [ALPM-SCRIPTLET] (gconftool-2:798): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
    [2014-01-25 07:01] [ALPM-SCRIPTLET] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    [2014-01-25 07:01] [PACMAN] removed aisleriot (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed accerciser (3.8.2-1)
    [2014-01-25 07:01] [PACMAN] removed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 07:01] [PACMAN] removed vino (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed tracker (0.16.4-1)
    [2014-01-25 07:01] [PACMAN] removed totem-plugin (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed totem (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed sushi (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed nautilus (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed nautilus-sendto (3.8.1-1)
    [2014-01-25 07:01] [PACMAN] removed mousetweaks (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gucharmap (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed grilo-plugins (0.2.9-3)
    [2014-01-25 07:01] [PACMAN] removed gnome-user-share (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-user-docs (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed yelp (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-terminal (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-system-monitor (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-system-log (3.9.90-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-screenshot (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-keyring (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-dictionary (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-control-center (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-color-manager (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-contacts (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-calculator (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gdm (3.10.0.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-shell (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed mutter (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:01] [PACMAN] removed gnome-session (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed evince (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed epiphany (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed eog (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed empathy (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed cheese (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed baobab (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:02] [PACMAN] Running 'pacman -Rdd nvidia-utils mesa-libgl'
    [2014-01-25 07:02] [PACMAN] removed mesa-libgl (10.0.2-1)
    [2014-01-25 07:02] [PACMAN] removed nvidia-utils (331.38-1)
    [2014-01-25 07:02] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:03] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:04] [PACMAN] installed nvidia-304xx-utils (304.117-1)
    [2014-01-25 07:04] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 07:04] [PACMAN] installed nvidia-304xx (304.117-4)
    [2014-01-25 07:04] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:04] [PACMAN] installed baobab (3.10.1-1)
    [2014-01-25 07:04] [PACMAN] installed gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:04] [PACMAN] installed cheese (3.10.2-2)
    [2014-01-25 07:04] [ALPM-SCRIPTLET] To use Empathy you need to install at least one Telepathy connection manager.
    [2014-01-25 07:04] [PACMAN] installed empathy (3.10.3-1)
    [2014-01-25 07:04] [PACMAN] installed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed eog (3.10.2-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed epiphany (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed evince (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-session (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:05] [PACMAN] installed mutter (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-shell (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gdm (3.10.0.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-calculator (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-contacts (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-color-manager (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-control-center (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-dictionary (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-keyring (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-screenshot (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-system-log (3.9.90-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-system-monitor (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-terminal (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed yelp (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-user-docs (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-user-share (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed grilo-plugins (0.2.9-3)
    [2014-01-25 07:05] [PACMAN] installed gucharmap (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed mousetweaks (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed nautilus-sendto (3.8.1-1)
    [2014-01-25 07:05] [PACMAN] installed nautilus (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed sushi (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed totem (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed totem-plugin (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed tracker (0.16.4-1)
    [2014-01-25 07:05] [PACMAN] installed vino (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 07:13] [PACMAN] Running 'pacman -Syu'
    [2014-01-25 07:13] [PACMAN] synchronizing package lists
    [2014-01-25 07:14] [PACMAN] Running 'pacman -Syu'
    [2014-01-25 07:14] [PACMAN] synchronizing package lists
    [2014-01-25 07:14] [PACMAN] starting full system upgrade
    [2014-01-25 07:14] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
    [2014-01-25 07:16] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:45] [PACMAN] Running 'pacman -S intel-dri xf86-video-intel bumblebee nvidia'
    [2014-01-25 07:46] [PACMAN] Running 'pacman -S intel-dri xf86-video-intel bumblebee nvidia'
    [2014-01-25 07:46] [PACMAN] removed nvidia-304xx-utils (304.117-1)
    [2014-01-25 07:46] [PACMAN] removed nvidia-304xx (304.117-4)
    [2014-01-25 07:46] [PACMAN] installed mesa-libgl (10.0.2-1)
    [2014-01-25 07:46] [PACMAN] reinstalled intel-dri (10.0.2-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] >>> This driver uses SNA as the default acceleration method. You can
    [2014-01-25 07:46] [ALPM-SCRIPTLET] fall back to UXA if you run into trouble or test experimental
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Glamor acceleration. To do so, save a file with the following
    [2014-01-25 07:46] [ALPM-SCRIPTLET] content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Section "Device"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Driver "intel"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Option "AccelMethod" "sna"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] #Option "AccelMethod" "uxa"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] #Option "AccelMethod" "glamor"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] EndSection
    [2014-01-25 07:46] [PACMAN] installed xf86-video-intel (2.99.907-2)
    [2014-01-25 07:46] [PACMAN] installed virtualgl (2.3.3-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Don't forget to add yourself to the 'bumblebee' group to use Bumblebee
    [2014-01-25 07:46] [PACMAN] installed bumblebee (3.2.1-3)
    [2014-01-25 07:46] [PACMAN] installed nvidia-utils (331.38-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 07:46] [PACMAN] installed nvidia (331.38-2)
    [2014-01-25 07:49] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:49] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:49] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25

  • After EFI 1.1 upgrade, Linux won't boot

    I've been using Ubuntu Linux on my macbook from a year now (when I bought it). It's been working flawlessly until today.
    I've updated to EFI 1.1 (it's a macbook C2D from december 2006) and after succesfull install, the installer confirmed it, Ubuntu won't boot.
    I've tried everything, including PRAM and SMC clearing. I've reinstalled OS/X and the problem persists. Also the Ubuntu Feisty (7.04) and Gutsy (7.10 beta) Live-CDs stall at boot.
    It is possible to boot the computer with Knoppix 5.1.1 (older kernel) but the keyboard is erratic and doesn't detect hard drive.
    It was supposed that this update solved some problems with the keyboard under grub also. Mine is worse than ever, I can't type anything nor use the emergency shell in Linux. In Knoppix, keystrokes show repeated chars in the screen, making it unusable.
    Help please, this computer is my worktool. Thank you.

    I update to EFI 1.1 also. I was not able to boot into windows through bootcamp. It hangs on the gray screen. I try to use the option boot so it will show up the partition. Selecting Mac OS X boots fine, but when selecting windows, the mouse and screen freezed. So i tried PRAM clearing. same thing. Then I set the startup disk to Windows (in OS X preference) and I tried to press and hold power button until it finally boot into windows. Not sure what it did, but it's now works fine.

  • Ubuntu linux won't boot from cd

    I just downloaded an .iso file from linux and burned it with disk utility. When I restart I hold option to boot from the cd but it goes to this screen with a refresh arrow and a continue arrow and the fans are blasting. I cant click anything either. Im not very familiar with dual os boots and im probably doing something wrong. =Im looking for help from someone who has booted ubuntu on an imac g5.
    Imac G5 iSight   Mac OS X (10.4.7)   2Ghz 160GB HDD 400Watt Yamaha&JBL Sound System

    To startup from the cd press and hold the 'C' key during start up. If this doesn't work the cd may not have burned properly or is not bootable. I have the newest version of Ubuntu (Dapper Drake - 6.06) and it comes on a dvd not a cd, so double check if you have the correct version...
    You may not want to install ubuntu yet anyway - both ubuntu and yellow dog linux don't have thermal control measures for the G5 (the fans are at full at all times, which is very annoying) and broken sound drivers. They also have beta versions of the airport extreme drivers, so may not work for you. Furthermore, there is a big problem with ubuntu crashing at the login screen on G5's because of a sound conflict with esd - there is a work around, but I am having difficulties with it, so i can't verify whether it works or not. Yellow Dog is useable, but still pretty annoying because of the fans. All of this is unfortunate because these are the two most popular versions of Linux for the ppc. I have heard that Gentoo Linux for ppc is ok - you may want to try that if you just want to get to grips with a Linux system.... is there any reason why you want to use Ubuntu?
    JS

  • T400s Linux/Windows dual boot with Linux from Esata Flash Drive

    This project is about a dual boot Windows/Linux system without using the normal dual boot changes in the bootloader of the windows hard drive. When I started this I found bits and pieces of information on the web but no complete description so I wrote this post.
    I have done a dual boot system on my previous Thinkpad where I had partitioned the hard drive between Linux and windows. For this project I wanted to leave the windows hard drive absolutely intact and unaltered, and boot Linux from a flash drive in the esata port on the back of the T400s. Obviously this uses the F12 boot list function key to boot from the flash. The advantage of this is that Windows is totally unaltered and when I need Linux, I plug in the esata flash drive, hit F12 during the boot cycle and select booting from the esata flash drive. The reason for Esata rather than USB is simply speed. I have a nice fast Linux installation.
    I used the OCZ esata flash drive but suspect any of the alternatives will work. It did not need the accessory usb cable because the Thinkpad powered the esata flash directly.
    To boot from the esata drive I had to make the following changes in the bios
        I left the esata flash plugged in as I went into the bios
        Bios>config>Serial ATA and changed the Sata controller mode option to compatibility
        Restart and back into the Bios
        Bios>startup>boot - in my case the esata flash drive showed up as ATA HDD2 and was excluded from the boot order so I had to un-exclude it and move it to the point in the boot order that I wanted.
    Next I downloaded a linux installation iso and put it on a CD - in my case opensuse. Then booted from the CD
    From now on this instructions are specific to opensuse and yast but can be generalized to whatever Linux is being used.
    In my case yast came up with a good set of suggestions for automatically partitioning the flash drive but then crashed during the partitioning itself. So I rebooted and specified the partitions manually.
        A fat32 partition left as a partition which both windows and Linux could see (in my case about 20% of the drive) (/dev/sdb1)
        An extended partition with the remainder of the drive (/dev/sdb2) which contains the following logical partitions
        A linux Swap partition of 2GB (/dev/sdb5)
        A linux /home partition –the remainder of the drive (/dev/sdb6)
        A linux /root partition of 8GB (/dev/sdb7)
    Yast automatically suggested mount points of C,D,E for the windows partitions. Unfortunately because of the way the Thinkpad hard drive was laid out Yast had C assigned the ThinkPad Service partition and D assigned to the SW_Preload (or main windows partition). However there was an edit function that allows for the reversal of those mount points so that the windows C drive is mounted in Linux as Windows/C thereby avoiding confusion. I had already backed up and removed the Thinkpad factory install data so I did not have to deal with that. Yast suggested Windows/E for the mount point of the FAT32 partition on the flash drive, which I accepted.
    The yast install configurator made all this manual selection easy, and after the manual configuration the partitioning worked perfectly.
    Next step was Linux user configuration which went fine
    Next was booting.
    In the section management tab
        delete the windows 1 and 2 options (since we are not dual booting directly)
    In the boot loader installation tab
        uncheck boot from mbr ( this stops the install from installing Grub and dual boot on the windows c drive
        check boot from root partition (this installs grub and all associated files in the Linux root partition (/dev/sdb6)
    I believe that the correct procedure at this point is to click Boot Loader installation details which will bring up the Grub device map. In the device map there will be a line for the fixed hard drive (aka the windows drive) and a line for the esata flash drive. When the installer started up these were in hard drive and esata drive order. However when we boot directly from the flash the esata drive will be grub drive hd0 and the fixed hard drive will be grub hd1. The device map order needs to be changed to reflect this ie the esata drive should be first not second.
    I did not do this and ended up initially doing Grub command line editing to boot and later manually editing the grub files using information I had previously learned the hard way and through google.
    At this point let the installer go ahead and install Linux. After doing this it should come back and tell you to reboot. Do not do it yet because we need to install the MBR into the flash drive.
    I suspect that there is a way of doing this in Yast running from the Live CD but it was not obvious to me so I used the manual method that I have used before.
    Open a root terminal
    Mount /dev/sdb6 to /mnt/sdb6 (my linux root)
    Touch /mnt/sdb6/boot/grub/flag
    The purpose of this is when we go looking later at the grub command prompt we need an easy to find unique file
    Start grub and do the following
    #grub
                grub> find /boot/grub/flag
                    (hd1,5)    -- the result of the find in my example
                grub> root (hd1,5)   -- using the result of the find in my example
                grub> setup (hd1)   -- install mbr -- my example parameters - if you get this wrong you will trash some other drive!!!
                      hopefully grub announces success
                grub> quit
    Reboot and select the flash drive. In my case I still had the grub devicemap wrong and had to edit the grub commands during boot to tell grub how to find the correct partition and then edit them again after booting
    Typical linux install issues that we all always seem to have and can be solved with a little (or a lot of) google research.
    As I said at the beginning I now have an untouched windows installation and a nice fast Linux installation. I hope that this will be of some use to someone.

    Hi chrissh
    i tried this exact procedure... on the exact same notebook (T400s). However, as soon as I set the 
        Bios>config>Serial ATA to "compatibility", I cannot use my default Windows installation! I immediately get the "blue screen of death".
    I doubt I did anything differently since this is the first step of your procedure and my laptop is brand new!
    any idea? 

  • Power mac g5--won't boot, and I can't sleep

    Hi all,
    I'm hoping someone is awake and can help. My power mac g5, circa 2005, has always come with some problems, specifically, kernal panics. It's not bad RAM, but I have never tested the video card. Oddly enough, it seems to go down most often in the most in simple internet applications.
    Today, it froze in Firefox and I cannot get it to reboot. It stalls/freezes in the gray apple screen. Called my IT friend, and he said to zap the PRAM. That brought it back up for a second, and then it froze again. I replaced the battery, no results.
    I can't get it to boot in safe mode or even single-user- it freezes up as well. I certainly can't get it up long enough to load the boot disk.
    It may be garbage...I can accept that...but it is holding hours of work. Will I be able to retrieve this??
    Help
    Message was edited by: nigelsupercat

    Hi, I'm having same problem. G5 1.8 dual processor purchased March '05, won't boot. Not from cd either.
    Took it to the apple geniuses and first was told it might be a bad board or processor and that I might as well just buy a new system. Well, I can't, because I still need to run some classic applications for business reasons, and because of that I'm stuck at Mac OS X 10.3.9. Anyway... I left my system with the apple geniuses and got a call 3 days later saying it was fixed @ no charge and that the 3rd party USB card was bad. They pulled it and said all was well.Great!, saving me $800 charge for a new board and over $430 for a new processor. So on the way home I buy a new USB hub get home start up and nothing! No change. Back to the Apple Store and after some testing this time I'm told it's definitely a bad hard drive. So, on the way home I buy a new hard drive. Get back, install the new HD and, you guessed it, can't format the disk, system won't boot from CD. BACK TO THE APPLE GENIUSES AGAIN! Now they tell me it's definitely the logic board. After 5 days I'm back where I started... except I have an old USB card that is most likely fine and new USB hub and a new HD I purchased because the Apple Geniuses told me they were bad! I asked them if they would apply a credit of some sort for the unnecessary purchases and my time (The closest Apple Store is 30 miles away), They politely said we appologize for the inconvenience, but no, we can't do that. I've been using Macs of all kinds since the early 1980's. And have never had one fail! Since I started looking into G5 problems, I've found many others with this startup issue. I feel there is a known issue with this series that apple is intentionally sweeping under the rug instead of issuing a recall or credit.

Maybe you are looking for

  • PO split  in  sourcing cockpit   ?      :-(

    Hello my helpful friends.je.je I have quick question for the SRM gurus: In the sourcing cockpit, I selected 20 items (per example) and the application splits those items among 2 purchase orders. What is the reason of this behavior ?  I know that ebp

  • Decreasing font size of the heading

    hi In my alv report im printing the heading ( Vendor Address Details)... how to decrease the font size of the heading... searched in sdn bt dint get the proper output.... Regards Smitha

  • Application error message

    My nokia asha 201 fails to use all apps, facebook, whatsapp, mail, twitter and even fails to go at internet instead it gives me the message of application error, out of memory, memory error so what should i do to restore all these functions on my pho

  • I am attempting to reinstall my Adobe CS 4 design standard.

    It gave me a set up error. I called customer service and they told me to download it at tiny.cc/cs3cs4cs5cs6. The only problem is there is no download there for CS4 design standard. I tried SC4 design premium but it also gave me a set up error. Can a

  • HT1222 updating through itunes takes too longer to compelete , is there any way to update it quickly?

    hello frnds. i have an apple iphone3gs and becoz of finish charging it is turned off and now it shows "connect to itunes" , but when i connect it to itunes it shows that ur device needs to restore and update. if i did'nt want to restore my iphone . i