Arch logo not appearing when booting

Hi guys I know this is probably for most of you not a problem but I like the logos and want them to have at boot up
So here is my situation:
I have a Samsung N150 netbook with an Intel Atom N450 Core, a GMA3150 Accelerator and a display that supports a resolution up to 1024x600 (although it is possible under windows to put it on 1024x768 too but its not made for that and doesnt look good)
I am using grub and I have read that you need to use the frambuffer to be able to see the logos (with the parameter vga=...). However this doesnt make the logos appear, here is the vga setting that I put in the kernel line: vga=789
He also supports only a maximum solution of 800x600 when booting with grub (is there a way to make it with 1024x600?), after udev starts he sets the display resolution to 1024x600. still the logos are not there
The netbook that I had before this one (acer aspire one) did show the logos and it had a very similar hardware (atom core, gma3xxx accelerator) so I think it should be possible with this one too..
any idea what I can do?
Last edited by Triver (2011-08-17 22:46:41)

Long story:
- some people complained that Arch doesn't ship vanilla packages but alters them unnecessarily https://bbs.archlinux.org/viewtopic.php?pid=940787
mhertz wrote:Then, and imho even worse, xorg patched to show a different desktop background and the kernel's tux logo exchanged with an arch logo!
https://bugs.archlinux.org/task/24513
and a response https://bugs.archlinux.org/task/24654
The xorg patch was removed too, as it wasn't needed anymore - http://projects.archlinux.org/svntogit/ … 5ec326df7c
https://bugs.archlinux.org/task/24514
Yes, it's the same logo. No, it's unlikely to be coming back.
Last edited by karol (2011-08-17 23:02:31)

Similar Messages

Bootcamp not appearing when booting up 10.8.2

Hi i'm new with bootcamp and decided to partition my hard drive with Windows(50gb) and Mac(400gb). I just logged and turned off for the last time. I rebooted again in bootcamp and held alt-option and it is not there anymore.
When I try to boot up to windows it just says that the disk is not avaliable anymore. (System Prefs>Startup Disk>Bootcamp is still there and tried it.)
Is it normal that bootcamp is a folder not a drive?
i have read all the other posts about this and to delete the ntfs drives but i dont understand that. Bootcamp can be seen in Startup Disk but not avaliable in the boot up stage when holding option.
I have also tried seeing what is wrong with the windows drive but i cant access it because it cant be modified.
Please Help!
Thanks

Welcome to the Apple Support Communities
It's normal that the Windows volume appears with a folder in Startup Disk. First, open Boot Camp Assistant, download the drivers and burn them into a USB drive or DVD. Then, go to System Preferences > Startup Disk, select Windows as your startup partition, reboot and install Boot Camp drivers in Windows. It will install all the drivers that your Mac needs, so it should work correctly

Logo not appearing when connecting to xp windows

Ued to work fine before latest upgrade to phone. Now unable to transfer pics as phone is not being detected.

Welcome to Apple Discussions. Next time you might want to post this in the Connected to Windows group.
I would start with the information in this article: http://support.apple.com/kb/TS1567
and if it still is having problems, this article: http://support.apple.com/kb/TS1502

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work????

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-Esteban

Hello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Images on Facebook do not appear when using different web browsers

Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My keyboard will not appear when i am using Notes App

My on screen keyboard does not appear when I use Notes app. The + sign (to add a new note) does not function to create a new note
Does anyone have any answers
Thanks

Try closing the Notes app completely and see if it works when you re-open it : from the home screen (i.e. not with Notes 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Notes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT3964 My tool bar and icons do not appear when I turn on my desktop iMac what can I do about it?

My tool bar and icons do not appear when my desktop boots up. Just wallpaper. Any ideas?

Does everything appear if you just click anywhere on the Desktop? This happens at random to me and it's a known bug (at least in 10.6.)

Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Since upgrading to 5.1, my oncreen keyboard does not appear when it needs to

since i have done the upgrade, my on-screen keyboard does not appear when it needs to. I keep having to restart my system to make it happen.... Is there a special way to display the keyboard manually, or should it be automatic?

Hellow keith5000 ,
regarding your issue lets see what we can do to solve this issue.
- have you tried safe boot
safe boot = starting up the mac with the SHIFT- button.
- when entering safe mode you will be able to enter and quick change some settings
now next question do the unwanted aplications still load in safe mode , if so
go to the Apple icon -> System preferences -> user & groups -> login items (top right on the screen from user & groups window) now at login items u can close any unwanted aplications by deleting them or unmarking them
- unwanted aplications will now disapear when starting up your mac os x system
- next issue should be your authentication , this will be a bit more tricky , lets see
same category user & groups and u will see your admin account try seeing if u have enabled the admin account right click on your admin account to see information about it and compare it if your info is correct , next see if you have authorized your admin account to write & read.
if these still don't work , make a test account to see if this problem is user wide or system wide.

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Some CGM graphics do not appear when FrameMaker files are converted to PDF

CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
When importing file into Frame, "Import by Reference" is selected.
When creating PDF in Frame, the following selections are made.
Any Suggestions would be greatly appreciated. Thanks very much.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From:   MichaelKazlow <[email protected]>
To:     rick barusic <[email protected]>
Date:   11/24/2010 10:32 PM
Subject:        Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
Help greatly appreciated.

Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

Try:
- Another cable
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Arch logo not appearing when booting

Similar Messages

Maybe you are looking for