Arch Macbook Pro Sticker

I designed a vinyl Arch sticker for my Macbook Pro. I've included links to the source file as well.
End Product: http://dl.dropbox.com/u/144408/macbook_sticker.jpg
Source SVG: http://dl.dropbox.com/u/144408/arch_linux_final.svg
What do you think?
Last edited by llamallama (2011-10-08 16:48:02)

lifeafter2am wrote:
llamallama wrote:
lifeafter2am wrote:Wow, almost makes me wish I still had my MBP .... almost!
It's not a bad Linux machine. I dislike having to run things like Pommed and nvidiabl for basic functions like keyboard shortcuts and backlight control, however. What do you use now?
I remember somethings being a PITA to get working ... and I always had problems with the stupid GPT tables. It worked well enough once it was up and running though. Plus, IMO, for design / aesthetics it wins hands down.
My current laptop is a Alienware M14x. I work for a company that does work on video games, so I need a gaming laptop; but I also wanted one that was at least semi-portable as I do travel. I am pretty happy with it thus far.
If you ever find yourself putting Linux on a Mac again, sync the partition tables with refit before and after partitioning. Then install grub to the boot partition and not the MBR. That saved me loads of trouble.

Similar Messages

How to format my macbook pro and I dont have my lion cd or usb stick?

How to format my macbook pro and I dont have my lion cd or usb stick?

try this
http://support.apple.com/kb/HT3294http://support.apple.com/kb/HT3294
http://support.apple.com/kb/TS4265http://support.apple.com/kb/TS4265
If you don't have the original PSWD, your beat, so tough if your a kid trying to be a kid

How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

So what exactly did you copy over? If it's a 12 gig iPhoto Library then it sounds like the files are there. Perhaps the copy went wrong along the way.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can I move an existing iTunes library from a Dell PC (which uses Windows Vista) to a MacBook Pro? I have tried to copy the library from the PC onto a memory stick but cannot move from the stick onto the MacBook Pro.

I have tried to copy my iTunes library from my old (2008) Dell PC to a 32 GB memory stick and then copy it from the stick to the iTunes library in the new MacBook Pro which I purchased recently from a reputable dealer which resells refurbished Macs, (lease returns, etc). The dealer was Computer Trends store in Saskatoon. They told me how to move my existing iTunes libary from the PC to the Mac but I cannot seem to achieve that objective. The Mac does not seem to recognize the memory stick. I thought the Mac would recognize that the memory stick held iTunes files and would then transfer them without prompting to its own iTunes libary. It did not do so. I have therefore tried to find the command sequence within iTunes (on the Mac) for moving the material from the memory stick to the iTunes library. Cannot find those commands. Does anybody know where to find such commands. I have to say, I am really disappointed that such a simple function would prove to be beyond my capabilities. I thought the Mac was supposed to be easier than a PC. !!! Oh well, I am hoping this forum will help !!!

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
So, you can see your whole iTunes folder on the memory stick after copying from the PC?

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?

Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length.

[Bounty] Free Macbook Pro to get Arch Linux running on Amazon's EC2

First, the details:
I will purchase a lowest–end Macbook Pro 13″ ($US 1,200 on Apple's store, new) for the first person to deliver to me a working set of step–by–step instructions for installing the latest Arch Linux on top of Amazon's EC2 platform.
Caveats & Rules:
- I don't care how long it takes you—there's a good chance I'm doing something absolutely stupid in my noobishness that's causing the problems I've been experiencing; if it takes you half an hour to make a working AMI, and produce instructions to do such… you just won yourself a Macbook Pro for half an hour's work. Booyah!
- Again, I say, I don't care how long it takes you—if you don't produce a working set of instructions, there will be no payout, even if you spend 200 hours trying (as I already have!). It's a bounty, not a work contract d-:
- You must provide me with instructions that work for me (as I don't intend to use your AMI, but rather modify the steps that worked for you a bit at a time until I arrive at an AMI configured exactly as I want it). If you arrive at a working AMI, and can reproduce your steps successfully locally, but they can't be made to work for me, I may be able to go about procuring alternative hardware for myself on which to preform the steps, or taking other measures to reproduce your environment; but the bottom line is I will not shell out until I can, personally, produce a working AMI running Arch Linux.
- The instructions are considered to be "working" when I can successfully SSH into the root account on an instance instantiated from an AMI created by following the instructions using the key generated by EC2.
- Your instructions must work both for x86_32 and x86_64 instance types; however, this shouldn't be too much of a problem, as (barring any weirdness) anything that works on x86_32 should be easily made to work on x86_64.
- Instructions that involve instantiating an intermediate bundling host (say, a CentOS or Fedora Core instance) and then installing Arch to a loopback filesystem using a statically–built pacman are much preferred to instructions that involve me having to install and package Arch locally and then ship it up to S3, because my upstream is unimaginably slow and I eventually will need to create something between eight and twenty different AMIs (see below). But anything that works will be accepted.
- If you don't want a Macbook Pro, alternative payment methods may be arranged, though you need to contact me before you start and arrange these, as there's only so much I can do.
- If you are in any way confused or unsure of what I'm offering here, please contact me before you start (see below for contact info)
Backstory:
I set up the first AMI for Arch Linux on Amazon, but unfortunately, I did some really stupid things (hey, I was completely new to Linux at the time, gimmie a break!). The root filesystem was limited to 1GB, there was a whole bunch of software that really was completely unnecessary (WiFi drivers? on a virtualized server? seriously?), there were no kernel modules provided… and so on.
So, after running all my stuff on instances of that for a while, I finally got fed up and found the time to start setting up a newer, cleaner AMI. Unfortunately, I made the mistake of deleting my old AMI before starting work on the first. Now I find myself completely unable to create an AMI that will work whatsoever, and I cannot for the life of me figure out why.
I've already invested 200 or so hours of my personal time since deleting my original, broken AMI; I'm very fed up and in badly need of working instances. I tried every method I could think of; running the Arch installer from a LiveCD locally and then bundling the running (and thus proved working) Arch install and shipping it off to S3; installing Arch on a loopback filesystem locally, cloning it to a local partition, booting to it to ensure it works, and shipping it off to S3; installing Arch on a loopback filesystem on a remote bundling host running CentOS or whatever and then shipping it off to S3… I've tried installing nothing but the essentials, I've tried installing everything the installer offers… I've tried to do my best to remember the exact steps I took the first time around, years ago, and reproduce them exactly… nothing has worked.
If I take EC2 out of the equation, and install the images I've prepared locally, they work. If I take Arch out of the equation, and install, say, CentOS instead, and then ship it off to EC2, it works. The only time I have problems is when I attempt to install Arch Linux specifically on EC2 specifically; the exact use–case I need.
I've run into a lot of problems along the way, and fixed them as I go, but I universally end up with an AMI that, once instantiated, does not successfully boot. Worse yet, I get absolutely no output from the console (provided by the ec2-get-console command–line tool) to help me debug the problem. I can't give you any more specifics beyond this to help you, because I don't want to insinuate some idea that will cause you to make some little stupid mistake that I also made, thus dooming the project.
Contact:
For more info of any sort, please hit me up on Google Talk or Jabber (… or any other XMPP–federated chat service, or AIM, or ICQ, or MSN, or whatever you like, they all use the same address anyway) at the following address:
[email protected]
Edit: I should point out that it would be good form to post here if you're going to make a stab at it, so interested parties know how many people are already making attempts.
Last edited by elliottcable (2009-07-25 03:59:46)

drtoki wrote:
http://blog.mudy.info/2009/04/archlinux-ec2-public-ami/
lolwat
from fryguy
Public AMIs aren't what I need, because I need to mass–produce quite a few AMIs with different custom configurations for different purposes; so I have to be able to start from scratch and arrive at a working AMI *myself*.
As for the script, I'm sitting down to play with it now; it looks just about exactly like what I've been doing so far. Maybe there's some small thing he did differently that will make it work. Here's hoping it works for me; that'll be a real load off my chest.

I have a 2012 MacBook Pro running OSX 10.8.5. I am noticing that when I try to drag an icon accross the screen it tends to stick for 5 to 10 seconds. Just did a reformat and reinstall of OS but no change. Any ideas?

when I try to drag icons accross the screen thet are sticking for up to 10 seconds. I have just done a recovery (reformatted and reinstalled the OSX 10.8.5 but no change. The activity monitor shows nothing out of the ordinary. I have a MacBook Pro 2012. I am having perfomance isues with ProTools and I'm wondering if the 2 are connected. I installes TechTools 7 and ran tests on everything and it says all is good. Any idea's? Thanks!
Jim

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

Problem booting Arch after first install on MacBook Pro

Hi all,
I've spent the past month intermittently trying to install Arch on an old MacBook Pro with a broken screen running in clamshell mode (I've reformatted, clean installed OSX, and run pacstrap around 20 times now). I was originally trying to install Debian, but the Arch Wiki was so good that I switched. The issue has been the same anyway.
Every time I try to install, I get stuck at the bootloader stage, where I need to make the installation bootable. It doesn't matter what bootloader method I use, since I've tried:
Boot from /boot partition with GRUB
Boot from separate HFS+ GRUB partition
Boot from Apple EFI System Partition (ESP) with GRUB
Boot with rEFInd
Boot with rEFInd installed to the ESP
Arch itself works fine, but when I go to boot from rEFInd's autodetected vmlinuz-linux from 128MiB ext2 partition, I get the same error message I've gotten with every other configuration:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
[ 0.558033] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.558097] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.558135] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.558189] uhci_hcd 0000:00:1a.0: init 0000:00:1b.0 fail, -19
Waiting 10 seconds for device /dev/disk/by-uuid/2b121a89-aeb9-430a-8e6c-a05b79f08427 ...
ERROR : device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427'.
You are being dropped to a recovery shell
[etc.]
When the Arch .iso live CD boots, it gets the first uhci_hcd errors, and then just moves on with:
:: hook [memdisk]
:: hook [archiso]
[etc.]
Here are the contents of my refind.conf file (/boot/efi/ESP/refind/refind.conf) (I omit all the standard comments):
timeout 0
scan_all_linux_kernels
[The example menu entries - all disabled]
menuentry "Arch Linux" {
icon /EFI/refind/icons/os_arch.icns
"Arch Boot"
loader /vmlinuz-linux
initrd /initramfs-linux.img
options "root=/dev/sda7 rw rootfstype=ext4"
And my refind_linux.conf (/boot/refind-linux.conf):
"Boot with standard options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
"Boot to single-user mode" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427 single"
"Boot with minimal options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
My custom menu entry for Arch doesn't work either (I'm still researching exactly why). I've been quite confused by different posts all over by different people on how to configure the manual refind.conf stanzas. I also tried a direct to root menu entry, where I tried the files as /boot/vmlinuz-linux, etc.
The error I always get here is the same:
Starting vmlinuz-linux
Using load options "[same as above]"
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
I've installed GRUB as well, just to be sure. Although I haven't moved it to any other partitions or 'blessed' it in OS X. (I have blessed the HFS+/EFI partitions when I used GRUB.)
Just FYI, I've used the following pages as guides:
My primary guide: Cody Littlewood's installation procedure for a MacBook Pro
The Arch Wiki MacBook Page, which was useful but a bit confusing and self-referential on the Bootloader section
The rEFInd website, by Rod Smith. I've read it fairly extensively (including an interesting comparison of SodaStream flavours)
A Gentoo Wiki page with a rEFInd example
The LFS GRUB chapter, and surrounding material
And I've largely read the Arch Wiki Beginners' Guide, Bootloaders page, GRUB page, GRUB EFI examples page, UEFI page and EFI Stub Loader page.
There have been others, but it's been a while since I read them. I've been trying to make this work for a while.
I've also looked at some other posts on similar subjects:
A post on the Arch Linux subreddit matching my (previous; with GRUB) situation, but not fixing my problem
An Arch forum post, of which there have been others, but google seems to have changed my search results.
EFI-Booting Ubuntu on a Mac, by Rod Smith
The Debian MacBook Pro page
A post about booting Debian without rEFIt
Again, there are more, but I can't find them all just now.
I've looked EVERYWHERE for a solution.
My question is, does anyone have any ideas on how I might make my computer bootable?
Almost forgot; I've run
mkinitcpio -p linux
successfully (I get the two driver warnings that seem to be standard).
Computer specifications are as follows:
Model Identifier: MacBookPro6,2 (mid 2010)
Processor Name: Intel i7
Architecture: amd64
RAM: 4GB DDR3
Graphics: NVIDIA GeForce GT 330M 512MB
Software: OS X 10.9.2
My disk partition table is as follows:
$gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.9
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Fround valid GPT with protective MBR; using GPT.
Disk /dev/sda: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): C0ADB511-F73D-404A-B128-DD01509AE6EA
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 262150 sectors (128.0MiB)
Number Start (sector) End (sector) Size Code Name [Additional Info]
1 * * 200.0MiB EF00 EFI System Partition rEFInd currently installed here, mounts to /boot/efi
2 * * 185.8GiB AF00 OSX
3 * * 619.9MiB AB00 Recovery HD
4 * * 93.1GiB AF00 DMZ unjouranaled HFS+ shared partition
5 * * 4.0GiB 8200 Arch Swap
6 * * 128.0MiB 8300 Arch Boot ext2
7 * * 50.0GiB 8300 Arch Root ext4
8 * * 131.8GiB 8300 Arch Home ext4
And my fstab, made with genfstab after I mounted everything (except for the swap stanza, which I had to write):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427
/dev/sda7 / ext4 rw,relatime,data=ordered 0 1
# UUID=efb41f69-6f99-4c8b-8431-01f3cd22c9cc
/dev/sda6 /boot ext2 rw,relatime 0 2
# UUID=67E3-17ED LABEL=EFI
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed, errors=remount-ro 0 2
# UUID=[another long UUID]
/dev/sda8 /home ext4 rw,relatime,data=ordered 0 2
# UUID=[another long UUID] LABEL=DMZ
/dev/sda4 /dmz hfsplus rw,relatime,unmask=22,uid=0,gid=0,nls=utf8 0 0
# UUID=[another long UUID]
/dev/sda5 swap swap defaults 0 0
Last edited by rjmh (2014-04-04 08:35:20)

henriqueleng wrote:
I don't know about Mac computers but i use a uefi motehrboard,
To install it i created a partition with 512MB and i mounted /boot on there. all the rest of system are normal.
I use gummiboot, i don't know if its stuff on Mac. I think that ou should try another bootloader!
And why do you mounted two point on /boot?
/boot and /boot/efi?
Are you sure you're using uefi, my fstab looks just like his with the boot and efi partition. I'm pretty sure that's how the wiki says to set it up. That's the fstab for a laptop with uefi if it helps you out. I had problems with grub btw, so I had to set up gummiboot
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb3
UUID=0c1c97a3-0472-4141-a756-a03c00a4a3cf / ext4 rw,relatime,data=ordered,discard 0 1
# /dev/sda3
UUID=8a4412fa-5d4b-4de4-91ff-a4d05b3705e1 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sdb2
UUID=971ed3e8-394d-46b3-b0d4-e8bb86b267cf /boot ext4 rw,relatime,data=ordered,discard 0 2
# /dev/sdb1
UUID=095C-CB43 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda1
UUID=12a4a2b1-6338-495a-8a41-474653eb227b /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=846803f1-3f5b-48ae-9945-37e9725011b2 none swap defaults 0 0

Hi i bought a new 500gb hard drive on my 2011 macbook pro, it is a blank hardrive and i forgot to save my other files on an external hard drive , i have a usb stick with mavericks installed on it. can i just go ahead and do a straight install by using it?

hi i have a macbook pro 2011 model, i decided to upgrade my hardrive and bought a 500gb blank hardrive, my query is because i wasnt able to save most of my files and my operating system to an external hard drive, i have a usb stick with a mavericks os installed on it. will i be able to do a straight install by just doing this method? i will be grateful for any tips or help u might offer, thanks.

Is it just bootable or does it have the Mavericks installation files on it? If so, yes. If not, no. You might consider getting an external enclosure. Put your old drive in it and boot to its Recovery partition. You can install from there. As a matter of fact, you can run Migration Assistant and get all your stuff over too.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1396656137&sr=8-3&keywords=2.5+enclosure

Contacts App in my macbook pro displays an image and I don't want it. I can change it but I cant just get rid of it. Actually I cant change it, neither from the contacts app or the settings users profiles. Appears changeable but changes dont stick.

The image in question is next to my own entry in the address book. If I open the padlock any change in the selected image appears set but when I send an email the default image still appears so I cant even change it let alone achieve my goal of just not having a silly icon/image next to my name. I actually dont want an image at all, I want my recipients just to recieve my email. I think its really unprofessional to have silly images assigned and I cannot stand to send emails this way. Really appreciate if anyone could help me rid this daft image from my emails and contact app. I just dont get the point of not having control over this silliness myself. Apologes for being grumpy but i just wasted and hour and half trying to simply stop this happening. Really frustrated. I cant use my macbook pro for emailing as they look unprofessional and silly if sent from the mac.
Thanks for any help.

mark --
I cant use my macbook pro for emailing as they look unprofessional and silly if sent from the mac.
It doesn't show when you send mail. It's only there to tell you which user sent the mail. It does NOT show up on any mail you send. It should be the image that you selected in System Preferences> Users & Groups > Your Account. That is where you can change it, and it will "stick."

Installing Arch on a MacBook Pro Retina

I've spent many hours trying to install Arch on my macbook pro to no avail (over 14 times I've tried), I've learned a lot through this process, but apparently not enough. I get the system installed and blessed (in OSX), but when I try to boot into it I get stuck on "loading initial ram disk." (Previous errors were a read-only file system, but this one is latest) My hunch tells me it has something to do with the mkinitcpio.conf (I was told to add "ahci" to MODULES and "keyboard" after "autodetect" in "HOOKS") and I know the mkinitcpio -p linux command creates the initial ram disk environment (thanks to the docs).
Here are my steps, the bash scripts I created to do all this. Does anything look out of the ordinary to anyone?
cgdisk /dev/sda #(setup partitions as below, sda1-3 not shown)
#partitions: (sda4 == 128MB Hfs+, sda5 == 256MB Linux (boot), sda6 == 30GB Linux (root), sda7 == 70GB #Linux Home)
#first script
mkfs.ext2 /dev/sda5
mkfs.ext4 /dev/sda6
mkfs.ext4 /dev/sda7
mount /dev/sda6 /mnt
mkdir /mnt/boot && mount /dev/sda5 /mnt/boot
mkdir /mnt/home && mount /dev/sda7 /mnt/home
pacstrap /mnt base base-devel
genfstab -p /mnt >> /mnt/etc/fstab
arch-chroot /mnt /bin/bash
#second script
#install wifi (dmesg | grep firmware still says no firmware tho...)
pacman -S wget b43-fwcutter
wget https://aur.archlinux.org/packages/b4/b … are.tar.gz
tar -zxf b43-firmware.tar.gz
cd b43-firmware
makepkg -si --asroot #kosher?
rmmod b43 && modprobe b43
echo arch > /etc/hostname
ln -s /usr/share/zoneinfo/US/Central /etc/localtime
hwclock --systohc --utc
useradd -m -g users -G wheel -s /bin/bash dmj && passwd dmj
sudo pacman -S sudo
nano /etc/sudoers #comment out wheel portion
sudo nano /etc/locale.gen #pick locale
locale-gen
echo LANG=en_US.UTF-8 > /etc/locale.conf
export LANG=en_US.UTF-8
mkinitcpio -p linux #someone said i need "ahci" in modules?
#make boot loader, copy to usb
pacman -S grub-efi-x86_64
grub-mkconfig -o boot/grub/grub.cfg
grub-mkstandalone -o boot.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg
mkdir /mnt/usbdisk && mount /dev/sdc1 /mnt/usbdisk
cp boot.efi /mnt/usbdisk/
umount /mnt/usbdisk/
sudo pacman -S dialog wpa_supplicant iw
exit
umount /mnt/home
umount /mnt/root
umount /mnt/
sudo reboot
I finally got a descriptive error message and am very excited to show everyone.
https://dl.dropboxusercontent.com/u/10021156/arch.jpg
Moderator Edit: Converted over sized in-line picture to link - ewaller
Last edited by dmj (2013-06-25 02:59:00)

Ok, so I managed to boot into arch. The issue was my fstab. The custom settings I was using were incorrect. Going with the defaults helped. Also, the version of grub I was using was broken. See this link for the fix: https://bbs.archlinux.org/viewtopic.php?id=164101
So after I tar -xvJf xxx.tar.xz the fixed version I was able to generate a boot.efi, copy it onto the 128MB HFS+ on OSX and then bless and boot.
A whole new slew of errors occurred.
First, the video mode error occurs "No suitable video mode" (and something about a font).
I found a fix for it here: (but it didn't work) https://wiki.archlinux.org/index.php/GR … d.22_error
I added
cp /usr/share/grub/unicode.pf2 ${GRUB_PREFIX_DIR}
Then add:
UEFI systems:
insmod efi_gop
insmod efi_uga
After that add the following code (common to both BIOS and UEFI):
insmod font
if loadfont ${prefix}/fonts/unicode.pf2
then
insmod gfxterm
set gfxmode=auto
set gfxpayload=keep
terminal_output gfxterm
fi
Gist: Add these few lines to your grub.cfg, result: no luck still this error
What I'm not sure is if if this is affecting my ability to start the xorg-server.
Then after that the network became unreachable (which is strange because the ethernet worked ootb on install)
systemctl enable dhcpcd@enp0s10
systemctl start dhcpcd@enp0s10
allows me to ping -c 3 google.com
Lastly, I cannot start the xorg server. Says the nvidia module is bad. I installed bumblebee, and ran startx (not from root) and I get a black screen. This is after installing: xorg-server xorg-xinit xorg-server-utils xf86-input-synaptics nvidia acpid
Then running: systemctl enable acpid nvidia-xconfig
My graphics card is a Geforce 650M and I've read I should be using the nvidia module, not the open source noveau module.
startx just boots into a blank screen now and I'm unsure why.
Any speculations, ideas, or thoughts would be gladly welcome.
Thanks ahead of time!
Last edited by dmj (2013-06-26 03:05:26)

Macbook pro won't boot with two new 4GB RAM sticks.

I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

rdsvs wrote:
all specs are the same. old and new has code as below
pc2-5300 ddr2 667 200pin
Unless I misread your reply, that is not quite accurate.
Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

[SOLVED] Arch Linux on Macbook Pro 4.1

Hey There,
I'm a 2 years old Arch Linux guy and due to the problems I've had with my HP Pavilion PC, I've bought a Macbook Pro 3-4 months ago.. Because that it's a pain in the ass to install, upgrade and remove software on Mac OS X, especially development software such as Python and its bindings, I'm thinking of migrating to Arch Linux. Any way, I've just installed Arch Linux and dual boot..
I've installed X, GNOME, NVIDIA so far and when I try to open GNOME (via startx), it opens up a 800x600 or 1024x768 resolution X and shows GNOME.. But I can't move the mouse and no matter what I type no menus show up.. So I'm stuck after GNOME starts.. I can't drop back into the terminal so I hold the power button to shutdown and start the machine...
It seems that this is the only problem I have for now.. Anyone had this problem before? I've tried it with and without xorg.conf and the result is the same..
Last edited by T-u-N-i-X (2008-11-30 16:17:11)

CTRL + ALT + Backspace
That should close startx. Also, the user manual has a couple of alternative methods of setting up your xorg.conf file. I'd try those next.
http://wiki.archlinux.org/index.php/Beg … phic_Cards
Last edited by sharpie (2008-11-30 14:05:39)

Macbook pro doesn't see lexor 16gb usb memory stick. (Windows PC does see it)

Heading says it all. I'm baffled. Windows PC sees the memory stick but my MacBook Pro doesn't.
Plese help.
TJ

Mac's are very very particular about the Ram they use. Mac's historiclly only seem to like top of the line when it comes to Ram.
http://www.crucial.com
or
http://eshop.macsales.com/shop/apple/memory/
Both of these are considered the top of the line in Ram.
I have been in computers since 90 and I am not at all familiar with Lexor Ram

Rogers sticks connecting plm to macbook pro

Hi pls can someone guide me how to connect rogers stick to macbook pro i5 am totally lost

You mean this:
http://www.beyondwireless.ca/rogers-rocket-stick/
http://www.rogers.com/business/on/en/smallbusiness/products/internet/mobileinter net/sticks/?&cm_mmc=grdrt-_-all-_-en-_-stick
Why not read the directions and/or contact Buck?

Arch Macbook Pro Sticker

Similar Messages

Maybe you are looking for