Arch on HP 210 Netbook
okay, I've posted several threads in the past few weeks about my netbook, but have not yet to get my HP mini 210(-1170nr) to work with arch. So now i would like to plea with anyone who has an hp mini 210 to walk me though how you got wireless, clickpad, and the whole netbook working. Especially wireless since I get get that crap working after 4 arch install following the directions on the wiki, on random forum post, etc.
If anyone could help out from experience I would be in your debt, because I just can't stand not using arch on my netbook.
Last edited by Japanlinux (2011-01-28 03:49:53)
LSPCI
00:00. host bridge: intel corporation pinewview DMI bridge
00:02.0 VGA compatible controller: intel corporation pineview integrated graphics controller
00:02.1 display controller: intel corporation pineview integrated graphics controller
00:1b.0 audio device: intel corporation 82801G (ICH7 Family) High Definition audio controller (rev 02)
00:1c.0 PCI bridge: intel corporation 82801G (ICH7 family) pci express Port 1 (rev 02)
00:1c.1 PCi bridge: intel corporation 82801G (ICH7 family) pci express Port 2 (rev 02)
00:1d.0 USB controller: intel corporation 82801G (ICH7 family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: intel corporation 82801G (ICH7 family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: intel corporation 82801G (ICH7 family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: intel corporation 82801G (ICH7 family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: intel corporation 82801G (ICH7 family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 SATA Controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet Controller: Realtek Semiconductor Co., Ltd. RT8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network Controller: Broadcom Corporation Device 4727 (rev 01)
I have just installed Arch onto my netbook. Above is the lspci command. I had to type this into my main computer. I will get wired connection on my netbook and post the next commands (too long to transcribe to my computer >.>) I have not installed any drivers yet. I am not sure if the drivers should be the broadcom-wl drivers or not, so I will not touch a thing until someone could assist me here.
Last edited by Japanlinux (2010-11-22 00:11:28)
Similar Messages
-
Arch Linux Installation on Netbook
Hi,
I have a netbook Toshiba Satelite T110 and I have been trying to install Arch on it for a week now but to no avail. So I have come to think that may be Arch Linux is not really for netbook as opposed to being for Workstation or Laptops. I really would like to have your opinion on that.
Kind Regards,
PS: I have Arch installed in a VM and it works perfectly.
Last edited by zongo (2010-03-12 12:04:44)i use the beginer's guide to set up my arch on my netbook. I chose beginer's guide because I am new to linux. Ubuntu works very well on it. I did try it and test it. I did not want to use to ubuntu because I have never lliked it really. I ran into two problems when installiing Arch. The first was network related. It could not probe my NIC and most of all, the NIC disappeared completely. I could see it while booted from a live cd but once Arch system was launched, it had gone off the grid. I had to reinstall ubuntu to get it working again. I have no idea what happened. lspci would not show it etc.. The second issue was with my trackpad on my netbook. Could not have the click at all. I could not resolve those two issues for the life of me so I stopped the install. I posted on couple of forums to try to get an answer but nothing really probing or that i could use. That is why I think it might not have all the hardware support a distro like ubuntu might have. But again, I know so little about linux that may be I am all wrong here.
-
Hello guys,
im new user with Linux
is arch Linux compatible with Netbooks ?
because im using crunchbang Linux . i faced many incompatibility issues like Display/backlight/FN keys
and i hope this arch Linux can be compatible with my Samsung NetbookUse google with the site option to search. (It works better than the forum search.)
When I tried, google turned up https://wiki.archlinux.org/index.php/Samsung_N150. It doesn't seem to cover your netbook specifically but perhaps there's something useful there.
Here's the category page for samsung: https://wiki.archlinux.org/index.php/Category:Samsung.
Last edited by cfr (2012-08-11 00:17:11) -
Will an HP Mini 210-1212NR work with a HP Mini 110-1212NR? Screen?
I accidently purchased an HP mini 110 screen for hp 210 netbook. I'm wondering if it will still work if I install it? Will i need to install drivers...first?
Hello Fiona6,
I use iMac (Snow Lep) and 2011 Mini (Lion) and from both systems my results are:
Wired keyboard & mouse - work ok, I don't like or use wireless types.
My LaserJet 1010 - works ok (Your 1012 should also work, same series of printer).
If your display works ok now, cannot see why it would not work. My mini works with various vga and DVI displays I have at various times attached to it.
Don't know about your scanner though, with my all in one printer/scanner I have had to use OS X Image Capture program to scan. Might be worth a look at Epson's site to check on any software updates.
Roy.
Edit: Regarding display if you are getting a new mini you will need a new display adapter, minidisplayport to vga or dvi, assuming your display is one of these. This can be plugged into the Thunderbolt port on the new Macs.
Message was edited by: royfromchatteris -
Need to Verify the Processor and Features on HP Mini 210-3000
Hi,
I recently bought an HP mini 210-3000 netbook directly from this HP website. According to what I read here, it's supposed to have GPS capability built into the processor, and come with HP Navigator software. I've looked everywhere on the netbook, and can't find the GPS or Navigator anywhere. I've spent literally hours on the phone and chat with HP, and the support hasn't been very helpful. For example, they ran a chkdsk scan on the netbook in one of the support sessions that I let them take control of the netbook. Chkdsk? What does that have to do with GPS? Perhaps someone can explain this.
Anyway, I need a way to independently verify whether or not these features actually are on my netbook, and, if they are, how to access and configure them. My order receipt say that the processor is an "Intel(R) Atom(TM) Processor N455 (1.66GHz, 512KB L2 + Intel(R) Graphics Media Accelerator 3150." This info is copied directly from my receipt.
So the way it's been left as of Tuesday aftenoon is that I was told that HP needs to do further research, and that I won't have an answer for one or two days. If they can't help me, I'm really stuck b/c I need the netbook to be working on Friday.
Can anyone help me query the netbook to find out if this is indeed processor I have, and then to find out if the GPS and Navigator are embedded?
Also, can someone help me verify that 210-3000 is a valid HP model number?. Most other listings for the 210 netbook that I have seen have letters after the 3000, like Mini 210-3000 XXX XX, and mine doesn't. I also don't find the model number 3000, but only model numbers like 300x or 30xx. The 3000 seems to indicate the series number, and not refer to a specific model number.
I do want to say that I'm not very technical, but my would appreciate any info anyone might be able to provide, even if it is technical. I'll do my best to sort it out.
I also want to say to anyone from HP who might be monitoring this forum, that I am very, very disappointed in the support I've received :-(, and I need to get this resolved by the weekend for a special project that I can't postpone. Can you assist me, or tell me where to go for assistance?
Can anyone help?
Regards,
JainaI cannot find specs for that specific model but did find this page, does not look like it has GPS,
http://h10010.www1.hp.com/wwpc/za/en/ho/WF06a/321957-321957-3329744-3832383-3832383-5082191.html
Look in Device Manager to see what hardware is listed. -
My Mini 210 Netbook with Windows 7 Starter won't recover. When I turn the computer on, a screen with 2 options appears. Either do a startup repair or start up normally. Neither of these options work. The start up repair takes me to a blue screen and goes no further. I have no recovery disk for this computer and I'm not even sure the one HP offers at $45 will even work for this computer. Anyone have any suggestions? I'm almost at the point where I'm considering tossing this useless machine and buying a new one.....Not HP!!
Test the hard drive then the memory modules, post back the results.
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/How-to-test-RAM-and-HDD-Hard-Drive/td-p/... -
Need pin connection for HP Mini 210 headset jack
Hi,
Anybody have the pin connections used on the headset jack on the Mini 210? I'd like to plug some external audio into this jack and need to know if the mic input is the tip or ring of the 3.5 mm jack.
Thanks.
This question was solved.
View Solution.Because the answers to your second and third questions are YES ans YES.
And, If you search this forum, you will see my previous thread on this very subject,
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-Mini-210-Netbook-Headset-Audio-Combi-Soc... -
Trouble getting video working right on HP 2133 netbook
I wasn't sure what forum to post this on. I doubt it's a problem with the netbook itself, more likely it's a problem resulting from my own ignorance so I'm posting here.
I wanted to get Arch running on my netbook for a while now, and finally sat down to get it going. I followed the beginner's guide, and got a (semi) functional system as a result. I installed my video driver (openchrome) and KDE successfully. I can start KDE fine, but the video is messed up. The loading splash screen comes up and looks beautiful. You couldn't tell there was any problem at all until it actually loads and gets to the workspace. It detects and sets my resolution correctly at 1280x768, but it's still screwed up. The default bottom panel and the KDE cashew both look smaller than they should be, but all programs and almost everything else is WAY too big, especially fonts. Most fonts are so gigantic that they take up more space than the container they are in, making it impossible to read anything. Generally, it looks like the kind of thing you would expect running at some incredibly small resolution, but KDE indicates it is at the correct resolution and the desktop generally appears to be roughly the correct resolution.
I tried Googling this problem and discovered that apparently the standard openchrome releases don't work on the HP2133 . but the unreleased versions do, so I uninstalled the x86-video-openchrome package from the repos and downloaded the very latest version of openchrome from the official SVN and compiled/installed it, but it's still screwed up like this. I'm using the auto-config version of xorg.conf
How can I fix this?MadTux wrote:I am not sure about the state of kernel mode setting in combination with openchrome, but since kernel mode setting is enabled by default with kernel 2.6.31, you may try to disable it by adding "nomodeset" to the grub kernel line.
I put "nomodeset" on the end of my kernel line and rebooted but I don't see anything that changed, problem still persists. -
[Solved] Need help setting up Xorg on a netbook
I am in the process of setting up a Arch install on my Netbook and having problems with setting up Xorg. My system has a VIA CX700/VX700 unichrome pro graphics card, I installed the xf86-video-openchrome driver and loaded it. When trying to use Xorg with auto detection it seems like the vsync is off. Here is the Xorg.0.log file that is created. When I ran Xorg -configure the xorg.conf file generated didn't list any possible resolutions other than 0x0.
Last edited by vendion (2010-10-30 04:25:31).:B:. wrote:How does it work without any xorg.conf?
What do you mean, sorry I don't quite understand your question? The reason I tried without a xorg.conf file is in hopes that xorg and udev, or hal although I think that was replaced in favor of udev in the recent Xorg update IIRC, will be able to correctly detect my hardware and generate sane settings by default, this method worked fine on my desktops, but something about ether the graphics card, as stated in my original post a VIA CX700/VX700 unichrome pro or the 10 inch screen is throwing Xorg off. When I tried running the Xorg -configure and test the xorg.conf file it generated it did the same thing. I don't necessarily have to have X11 working through autoconfig having a xorg.conf file does not bother me as long as I can get it working. -
[SOLVED] System goes to sleep immediately after boot
I just upgraded this afternoon and now my system goes to sleep (suspend-to-RAM) as soon as it has finished booting. When I then press the power button, it wakes up, briefly shows the login screen and then goes back to sleep afterwards. This happens in runlevel 5. When I boot into runlevel 1, the system stays up all the time. I guess it has something to do with systemd and I already tried to find out how to debug this, but was unsuccessful in finding out what goes wrong.
I am using i686 Arch with systemd 210-3 and Kernel 3.13.6-1.
Pacman Log:
[2014-02-21 01:06] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-21 01:06] [PACMAN] synchronizing package lists
[2014-02-21 01:06] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-21 01:06] [PACMAN] starting full system upgrade
[2014-02-21 01:08] [PACMAN] Running 'pacman --color auto -S eapeak extra/alsa-lib extra/alsa-utils'
[2014-02-21 01:08] [PACMAN] Running 'pacman --color auto -S extra/alsa-lib extra/alsa-utils community/espeak'
[2014-02-21 01:08] [PACMAN] installed alsa-lib (1.0.27.2-1)
[2014-02-21 01:08] [PACMAN] installed dialog (1:1.2_20140112-1)
[2014-02-21 01:08] [PACMAN] installed libogg (1.3.1-2)
[2014-02-21 01:08] [PACMAN] installed flac (1.3.0-1)
[2014-02-21 01:08] [PACMAN] installed libvorbis (1.3.4-1)
[2014-02-21 01:08] [PACMAN] installed libsndfile (1.0.25-3)
[2014-02-21 01:08] [PACMAN] installed libsamplerate (0.1.8-3)
[2014-02-21 01:08] [PACMAN] installed alsa-utils (1.0.27.2-1)
[2014-02-21 01:08] [PACMAN] installed jack (0.124.1-1)
[2014-02-21 01:08] [PACMAN] installed portaudio (19_20140130-1)
[2014-02-21 01:08] [PACMAN] installed libasyncns (0.8-5)
[2014-02-21 01:08] [PACMAN] installed xcb-proto (1.10-1)
[2014-02-21 01:08] [PACMAN] installed xproto (7.0.25-1)
[2014-02-21 01:08] [PACMAN] installed libxdmcp (1.1.1-1)
[2014-02-21 01:08] [PACMAN] installed libxau (1.0.8-2)
[2014-02-21 01:08] [PACMAN] installed libxcb (1.10-1)
[2014-02-21 01:08] [PACMAN] installed kbproto (1.0.6-1)
[2014-02-21 01:08] [PACMAN] installed libx11 (1.6.2-1)
[2014-02-21 01:08] [PACMAN] installed xextproto (7.3.0-1)
[2014-02-21 01:08] [PACMAN] installed libxext (1.3.2-1)
[2014-02-21 01:08] [PACMAN] installed inputproto (2.3-1)
[2014-02-21 01:08] [PACMAN] installed libxi (1.7.2-1)
[2014-02-21 01:08] [PACMAN] installed recordproto (1.14.2-1)
[2014-02-21 01:08] [PACMAN] installed fixesproto (5.0-2)
[2014-02-21 01:08] [PACMAN] installed libxfixes (5.0.1-1)
[2014-02-21 01:08] [PACMAN] installed libxtst (1.2.2-1)
[2014-02-21 01:08] [PACMAN] installed libice (1.0.8-2)
[2014-02-21 01:08] [PACMAN] installed libsm (1.2.2-2)
[2014-02-21 01:08] [PACMAN] installed json-c (0.11-1)
[2014-02-21 01:08] [PACMAN] installed libpulse (4.0-6)
[2014-02-21 01:08] [PACMAN] installed espeak (1.47.11-1)
[2014-02-21 01:10] [PACMAN] Running 'pacman --color auto -S extra/beep'
[2014-02-21 01:10] [PACMAN] installed beep (1.3-2)
[2014-02-21 01:10] [PACMAN] Running 'pacman --color auto -S extra/beep'
[2014-02-21 01:20] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-21 01:20] [PACMAN] synchronizing package lists
[2014-02-21 01:20] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-21 01:20] [PACMAN] starting full system upgrade
[2014-02-21 01:21] [PACMAN] removed libusbx (1.0.17-1)
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 7 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 7 signed: 60 trust: 2-, 0q, 0n, 5m, 0f, 0u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-01-21
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Updating trust database...
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-01-21
[2014-02-21 01:21] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
[2014-02-21 01:21] [PACMAN] upgraded linux-api-headers (3.12.4-1 -> 3.13.2-1)
[2014-02-21 01:21] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2014-02-21 01:21] [ALPM-SCRIPTLET] Generating locales...
[2014-02-21 01:21] [ALPM-SCRIPTLET] de_DE.UTF-8... done
[2014-02-21 01:21] [ALPM-SCRIPTLET] de_DE.ISO-8859-1... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] de_DE.ISO-8859-15@euro... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] en_US.UTF-8... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] en_US.ISO-8859-1... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] Generation complete.
[2014-02-21 01:22] [PACMAN] upgraded glibc (2.18-12 -> 2.19-2)
[2014-02-21 01:22] [PACMAN] upgraded binutils (2.24-1 -> 2.24-2)
[2014-02-21 01:22] [PACMAN] upgraded file (5.16-1 -> 5.17-1)
[2014-02-21 01:22] [PACMAN] upgraded flex (2.5.37-1 -> 2.5.38-1)
[2014-02-21 01:22] [PACMAN] upgraded gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-21 01:22] [PACMAN] upgraded gcc (4.8.2-7 -> 4.8.2-8)
[2014-02-21 01:22] [PACMAN] upgraded perl-error (0.17021-1 -> 0.17022-1)
[2014-02-21 01:22] [PACMAN] upgraded git (1.8.5.4-1 -> 1.9.0-1)
[2014-02-21 01:22] [PACMAN] upgraded p11-kit (0.20.1-1 -> 0.20.2-1)
[2014-02-21 01:22] [PACMAN] upgraded gnutls (3.2.10-1 -> 3.2.11-1)
[2014-02-21 01:22] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
[2014-02-21 01:22] [PACMAN] upgraded libsasl (2.1.26-6 -> 2.1.26-7)
[2014-02-21 01:22] [PACMAN] upgraded pam (1.1.8-2 -> 1.1.8-3)
[2014-02-21 01:22] [PACMAN] upgraded systemd (208-10 -> 208-11)
[2014-02-21 01:22] [PACMAN] installed libusb (1.0.18-1)
[2014-02-21 01:22] [PACMAN] upgraded man-pages (3.57-1 -> 3.58-1)
[2014-02-21 01:22] [PACMAN] upgraded sqlite (3.8.3-1 -> 3.8.3.1-1)
[2014-02-21 01:22] [PACMAN] upgraded python2 (2.7.6-1 -> 2.7.6-2)
[2014-02-21 01:22] [PACMAN] upgraded s-nail (14.5.2-3 -> 14.5.2-4)
[2014-02-21 01:22] [PACMAN] upgraded sudo (1.8.9.p4-1 -> 1.8.9.p5-1)
[2014-02-21 01:22] [PACMAN] upgraded systemd-sysvcompat (208-10 -> 208-11)
[2014-02-21 18:52] [PACMAN] Running 'pacman --color auto -S extra/alsa-tools extra/alsa-utils extra/alsa-oss extra/alsa-lib extra/alsa-firmware extra/alsa-plugins'
[2014-02-21 18:52] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
[2014-02-21 18:52] [PACMAN] installed alsa-tools (1.0.27-5)
[2014-02-21 18:52] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
[2014-02-21 18:52] [PACMAN] installed alsa-oss (1.0.25-2)
[2014-02-21 18:52] [PACMAN] installed alsa-firmware (1.0.27-2)
[2014-02-21 18:52] [PACMAN] installed alsa-plugins (1.0.27-2)
[2014-02-21 19:02] [PACMAN] Running 'pacman --color auto -S extra/festival'
[2014-02-21 19:02] [PACMAN] installed festival (2.1-4)
[2014-02-21 19:03] [PACMAN] Running 'pacman --color auto -S community/festival-english'
[2014-02-21 19:03] [PACMAN] installed festival-english (2.0.95-2)
[2014-02-21 19:03] [PACMAN] Running 'pacman --color auto -S extra/alsa-oss'
[2014-02-21 19:03] [PACMAN] reinstalled alsa-oss (1.0.25-2)
[2014-02-27 15:30] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-27 15:30] [PACMAN] synchronizing package lists
[2014-02-27 15:30] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-27 15:30] [PACMAN] starting full system upgrade
[2014-02-27 15:31] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
[2014-02-27 15:31] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
[2014-02-27 15:31] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:31] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
[2014-02-27 15:32] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-02-27 15:32] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
[2014-02-27 15:32] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-02-27 15:32] [ALPM-SCRIPTLET] (stdin): 4,226.6 KiB / 11.6 MiB = 0.354, 1.1 MiB/s, 0:10
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-02-27 15:33] [ALPM-SCRIPTLET] (stdin): 13.8 MiB / 41.2 MiB = 0.334, 1.4 MiB/s, 0:28
[2014-02-27 15:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
[2014-02-27 15:33] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
[2014-02-27 15:33] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
[2014-02-27 15:33] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
[2014-02-27 15:33] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
[2014-02-27 15:33] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6.1-1)
[2014-02-27 15:33] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:33] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:33] [PACMAN] Running 'pacman --color auto -U --noconfirm /tmp/yaourt-tmp-akurei/PKGDEST.img/btsync-1.2.82-3-i686.pkg.tar.xz'
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] WebGUI can be accessed at http://localhost:8888
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] To start btsync, execute:
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] systemctl start btsync@user
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] where 'user' is your username.
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] To autostart btsync on systm start, excute
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] systemctl enable btsync@user
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] where 'user' is your username.
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [PACMAN] upgraded btsync (1.2.82-1 -> 1.2.82-3)
[2014-03-01 19:34] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-01 19:34] [PACMAN] synchronizing package lists
[2014-03-01 19:34] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-01 19:34] [PACMAN] starting full system upgrade
[2014-03-01 19:35] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
[2014-03-01 19:35] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
[2014-03-01 19:35] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
[2014-03-01 19:35] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
[2014-03-01 19:35] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
[2014-03-01 19:35] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
[2014-03-04 23:15] [PACMAN] Running 'pacman --color auto -S --asdeps --needed extra/aalib extra/libmikmod community/allegro'
[2014-03-05 18:00] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-05 18:00] [PACMAN] synchronizing package lists
[2014-03-05 18:00] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-05 18:00] [PACMAN] starting full system upgrade
[2014-03-05 18:00] [PACMAN] upgraded gnutls (3.2.11-1 -> 3.2.12-1)
[2014-03-05 18:00] [PACMAN] installed libseccomp (2.1.1-1)
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: systemd has not been reexecuted. It is recommended that you
[2014-03-05 18:00] [ALPM-SCRIPTLET] reboot at your earliest convenience.
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: Network device naming is now controlled by udev's net_setup_link
[2014-03-05 18:00] [ALPM-SCRIPTLET] builtin. Refer to the NETWORK LINK CONFIGURATION section of the
[2014-03-05 18:00] [ALPM-SCRIPTLET] udev manpage for a full description.
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: No changes have been made to your network naming configuration.
[2014-03-05 18:00] [ALPM-SCRIPTLET] Interfaces should continue to maintain the same names.
[2014-03-05 18:00] [PACMAN] upgraded systemd (208-11 -> 210-2)
[2014-03-05 18:00] [PACMAN] upgraded libpulse (4.0-6 -> 5.0-1)
[2014-03-05 18:00] [PACMAN] upgraded man-pages (3.60-1 -> 3.61-1)
[2014-03-05 18:00] [PACMAN] upgraded systemd-sysvcompat (208-11 -> 210-2)
[2014-03-10 15:50] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-10 15:50] [PACMAN] synchronizing package lists
[2014-03-10 15:51] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-10 15:51] [PACMAN] starting full system upgrade
[2014-03-10 15:52] [PACMAN] upgraded file (5.17-1 -> 5.17-2)
[2014-03-10 15:52] [PACMAN] upgraded gnutls (3.2.12-1 -> 3.2.12.1-1)
[2014-03-10 15:52] [PACMAN] upgraded libarchive (3.1.2-4 -> 3.1.2-6)
[2014-03-10 15:52] [PACMAN] upgraded libpng (1.6.9-1 -> 1.6.10-1)
[2014-03-10 15:52] [PACMAN] upgraded libcups (1.7.1-3 -> 1.7.1-4)
[2014-03-10 15:52] [PACMAN] upgraded libnl (3.2.23-1 -> 3.2.24-1)
[2014-03-10 15:52] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-10 15:52] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux.img
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-03-10 15:52] [ALPM-SCRIPTLET] (stdin): 4,276.4 KiB / 11.7 MiB = 0.356, 1.4 MiB/s, 0:08
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-03-10 15:53] [ALPM-SCRIPTLET] (stdin): 13.8 MiB / 41.2 MiB = 0.335, 1.1 MiB/s, 0:36
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-10 15:53] [PACMAN] upgraded linux (3.13.5-1 -> 3.13.6-1)
[2014-03-10 15:53] [PACMAN] upgraded linux-headers (3.13.5-1 -> 3.13.6-1)
[2014-03-10 15:53] [PACMAN] upgraded pkgfile (12-1 -> 13-1)
[2014-03-10 15:53] [PACMAN] upgraded ruby (2.1.0-2 -> 2.1.1-1)
[2014-03-10 15:53] [PACMAN] upgraded s-nail (14.6.1-1 -> 14.6.2-1)
[2014-03-10 15:53] [PACMAN] upgraded systemd (210-2 -> 210-3)
[2014-03-10 15:53] [PACMAN] upgraded systemd-sysvcompat (210-2 -> 210-3)
[2014-03-10 18:32] [PACMAN] Running 'pacman -Syyu'
[2014-03-10 18:32] [PACMAN] synchronizing package lists
[2014-03-10 18:32] [PACMAN] starting full system upgrade
[2014-03-10 18:32] [PACMAN] upgraded dhcpcd (6.2.1-1 -> 6.3.1-1)
[2014-03-10 18:32] [PACMAN] upgraded espeak (1.47.11-1 -> 1.48.04-1)
[2014-03-10 18:32] [PACMAN] upgraded tzdata (2013i-1 -> 2014a-1)
The last log via "journalctl -x -b -1":
-- Logs begin at Mo 2013-02-25 20:48:46 CET, end at Mo 2014-03-10 18:44:57 CET. --
Mär 10 18:41:59 matt systemd-journal[178]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.4M available → current limit 49.8M).
Mär 10 18:41:59 matt systemd-journal[178]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.4M available → current limit 49.8M).
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpuset
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpu
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpuacct
Mär 10 18:41:59 matt kernel: Linux version 3.13.6-1-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 7 22:30:23 CET 2014
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: e820: BIOS-provided physical RAM map:
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f7bffff] usable
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000003f7c0000-0x000000003f7cdfff] ACPI data
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000003f7ce000-0x000000003f7fffff] ACPI NVS
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Mär 10 18:41:59 matt kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
Mär 10 18:41:59 matt kernel: SMBIOS 2.4 present.
Mär 10 18:41:59 matt kernel: DMI: Intel Intel/Intel, BIOS 080015 12/25/2009
Mär 10 18:41:59 matt kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mär 10 18:41:59 matt kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Mär 10 18:41:59 matt kernel: e820: last_pfn = 0x3f7c0 max_arch_pfn = 0x100000
Mär 10 18:41:59 matt kernel: MTRR default type: uncachable
Mär 10 18:41:59 matt kernel: MTRR fixed ranges enabled:
Mär 10 18:41:59 matt kernel: 00000-9FFFF write-back
Mär 10 18:41:59 matt kernel: A0000-DFFFF uncachable
Mär 10 18:41:59 matt kernel: E0000-E3FFF write-protect
Mär 10 18:41:59 matt kernel: E4000-EFFFF write-through
Mär 10 18:41:59 matt kernel: F0000-FFFFF write-protect
Mär 10 18:41:59 matt kernel: MTRR variable ranges enabled:
Mär 10 18:41:59 matt kernel: 0 base 000000000 mask 0C0000000 write-back
Mär 10 18:41:59 matt kernel: 1 base 03F800000 mask 0FF800000 uncachable
Mär 10 18:41:59 matt kernel: 2 disabled
Mär 10 18:41:59 matt kernel: 3 disabled
Mär 10 18:41:59 matt kernel: 4 disabled
Mär 10 18:41:59 matt kernel: 5 disabled
Mär 10 18:41:59 matt kernel: 6 disabled
Mär 10 18:41:59 matt kernel: 7 disabled
Mär 10 18:41:59 matt kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mär 10 18:41:59 matt kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Mär 10 18:41:59 matt kernel: Scanning 1 areas for low memory corruption
Mär 10 18:41:59 matt kernel: initial memory mapped: [mem 0x00000000-0x00bfffff]
Mär 10 18:41:59 matt kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mär 10 18:41:59 matt kernel: [mem 0x00000000-0x000fffff] page 4k
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x37000000-0x373fffff]
Mär 10 18:41:59 matt kernel: [mem 0x37000000-0x373fffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x30000000-0x36ffffff]
Mär 10 18:41:59 matt kernel: [mem 0x30000000-0x36ffffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x00100000-0x2fffffff]
Mär 10 18:41:59 matt kernel: [mem 0x00100000-0x003fffff] page 4k
Mär 10 18:41:59 matt kernel: [mem 0x00400000-0x2fffffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x37400000-0x377fdfff]
Mär 10 18:41:59 matt kernel: [mem 0x37400000-0x377fdfff] page 4k
Mär 10 18:41:59 matt kernel: BRK [0x008aa000, 0x008aafff] PGTABLE
Mär 10 18:41:59 matt kernel: RAMDISK: [mem 0x3f392000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: Allocated new RAMDISK: [mem 0x373d0000-0x377fd177]
Mär 10 18:41:59 matt kernel: Move RAMDISK from [mem 0x3f392000-0x3f7bf177] to [mem 0x373d0000-0x377fd177]
Mär 10 18:41:59 matt kernel: ACPI: RSDP 000f9b20 000014 (v00 ACPIAM)
Mär 10 18:41:59 matt kernel: ACPI: RSDT 3f7c0000 000038 (v01 122509 RSDT1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: FACP 3f7c0200 000084 (v02 122509 FACP1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: DSDT 3f7c0430 004442 (v01 BIBTB BIBTB010 00000010 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: FACS 3f7ce000 000040
Mär 10 18:41:59 matt kernel: ACPI: APIC 3f7c0390 00005C (v01 122509 APIC1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: MCFG 3f7c03f0 00003C (v01 122509 OEMMCFG 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: OEMB 3f7ce040 000071 (v01 122509 OEMB1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7cea50 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Local APIC address 0xfee00000
Mär 10 18:41:59 matt kernel: 127MB HIGHMEM available.
Mär 10 18:41:59 matt kernel: 887MB LOWMEM available.
Mär 10 18:41:59 matt kernel: mapped low ram: 0 - 377fe000
Mär 10 18:41:59 matt kernel: low ram: 0 - 377fe000
Mär 10 18:41:59 matt kernel: BRK [0x008ab000, 0x008abfff] PGTABLE
Mär 10 18:41:59 matt kernel: Zone ranges:
Mär 10 18:41:59 matt kernel: DMA [mem 0x00001000-0x00ffffff]
Mär 10 18:41:59 matt kernel: Normal [mem 0x01000000-0x377fdfff]
Mär 10 18:41:59 matt kernel: HighMem [mem 0x377fe000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: Movable zone start for each node
Mär 10 18:41:59 matt kernel: Early memory node ranges
Mär 10 18:41:59 matt kernel: node 0: [mem 0x00001000-0x0009efff]
Mär 10 18:41:59 matt kernel: node 0: [mem 0x00100000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: On node 0 totalpages: 259934
Mär 10 18:41:59 matt kernel: free_area_init_node: node 0, pgdat c0707d00, node_mem_map f6be0020
Mär 10 18:41:59 matt kernel: DMA zone: 32 pages used for memmap
Mär 10 18:41:59 matt kernel: DMA zone: 0 pages reserved
Mär 10 18:41:59 matt kernel: DMA zone: 3998 pages, LIFO batch:0
Mär 10 18:41:59 matt kernel: Normal zone: 1744 pages used for memmap
Mär 10 18:41:59 matt kernel: Normal zone: 223230 pages, LIFO batch:31
Mär 10 18:41:59 matt kernel: HighMem zone: 256 pages used for memmap
Mär 10 18:41:59 matt kernel: HighMem zone: 32706 pages, LIFO batch:7
Mär 10 18:41:59 matt kernel: Using APIC driver default
Mär 10 18:41:59 matt kernel: ACPI: PM-Timer IO Port: 0x808
Mär 10 18:41:59 matt kernel: ACPI: Local APIC address 0xfee00000
Mär 10 18:41:59 matt kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mär 10 18:41:59 matt kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mär 10 18:41:59 matt kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mär 10 18:41:59 matt kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mär 10 18:41:59 matt kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mär 10 18:41:59 matt kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mär 10 18:41:59 matt kernel: ACPI: IRQ0 used by override.
Mär 10 18:41:59 matt kernel: ACPI: IRQ2 used by override.
Mär 10 18:41:59 matt kernel: ACPI: IRQ9 used by override.
Mär 10 18:41:59 matt kernel: Using ACPI (MADT) for SMP configuration information
Mär 10 18:41:59 matt kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Mär 10 18:41:59 matt kernel: nr_irqs_gsi: 40
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Mär 10 18:41:59 matt kernel: e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Mär 10 18:41:59 matt kernel: Booting paravirtualized kernel on bare hardware
Mär 10 18:41:59 matt kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Mär 10 18:41:59 matt kernel: PERCPU: Embedded 14 pages/cpu @f6bbe000 s33280 r0 d24064 u57344
Mär 10 18:41:59 matt kernel: pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
Mär 10 18:41:59 matt kernel: pcpu-alloc: [0] 0 [0] 1
Mär 10 18:41:59 matt kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258158
Mär 10 18:41:59 matt kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:lvmmatt root=/dev/mapper/matt-root ro initrd=../initramfs-linux.img
Mär 10 18:41:59 matt kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mär 10 18:41:59 matt kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mär 10 18:41:59 matt kernel: Initializing CPU#0
Mär 10 18:41:59 matt kernel: allocated 2080248 bytes of page_cgroup
Mär 10 18:41:59 matt kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mär 10 18:41:59 matt kernel: Initializing HighMem for node 0 (000377fe:0003f7c0)
Mär 10 18:41:59 matt kernel: Memory: 1016432K/1039736K available (4471K kernel code, 448K rwdata, 1320K rodata, 588K init, 972K bss, 23304K reserved, 130824K highmem)
Mär 10 18:41:59 matt kernel: virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc071b000 - 0xc07ae000 ( 588 kB)
.data : 0xc055e28a - 0xc071a200 (1775 kB)
.text : 0xc0100000 - 0xc055e28a (4472 kB)
Mär 10 18:41:59 matt kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mär 10 18:41:59 matt kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mär 10 18:41:59 matt kernel: Preemptible hierarchical RCU implementation.
Mär 10 18:41:59 matt kernel: RCU dyntick-idle grace-period acceleration is enabled.
Mär 10 18:41:59 matt kernel: Dump stacks of tasks blocking RCU-preempt GP.
Mär 10 18:41:59 matt kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Mär 10 18:41:59 matt kernel: NR_IRQS:2304 nr_irqs:512 16
Mär 10 18:41:59 matt kernel: CPU 0 irqstacks, hard=f6408000 soft=f640a000
Mär 10 18:41:59 matt kernel: Console: colour VGA+ 80x25
Mär 10 18:41:59 matt kernel: console [tty0] enabled
Mär 10 18:41:59 matt kernel: tsc: Fast TSC calibration failed
Mär 10 18:41:59 matt kernel: tsc: PIT calibration matches PMTIMER. 2 loops
Mär 10 18:41:59 matt kernel: tsc: Detected 1595.992 MHz processor
Mär 10 18:41:59 matt kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.98 BogoMIPS (lpj=5319973)
Mär 10 18:41:59 matt kernel: pid_max: default: 32768 minimum: 301
Mär 10 18:41:59 matt kernel: Security Framework initialized
Mär 10 18:41:59 matt kernel: AppArmor: AppArmor disabled by boot time parameter
Mär 10 18:41:59 matt kernel: Yama: becoming mindful.
Mär 10 18:41:59 matt kernel: Mount-cache hash table entries: 512
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys memory
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys devices
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys freezer
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys net_cls
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys blkio
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: CPU: Physical Processor ID: 0
Mär 10 18:41:59 matt kernel: CPU: Processor Core ID: 0
Mär 10 18:41:59 matt kernel: mce: CPU supports 5 MCE banks
Mär 10 18:41:59 matt kernel: CPU0: Thermal monitoring handled by SMI
Mär 10 18:41:59 matt kernel: Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Mär 10 18:41:59 matt kernel: Freeing SMP alternatives memory: 20K (c07ae000 - c07b3000)
Mär 10 18:41:59 matt kernel: ACPI: Core revision 20131115
Mär 10 18:41:59 matt kernel: ACPI: All ACPI Tables successfully acquired
Mär 10 18:41:59 matt kernel: ftrace: allocating 20082 entries in 40 pages
Mär 10 18:41:59 matt kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Mär 10 18:41:59 matt kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mär 10 18:41:59 matt kernel: smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
Mär 10 18:41:59 matt kernel: Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
Mär 10 18:41:59 matt kernel: ... version: 3
Mär 10 18:41:59 matt kernel: ... bit width: 40
Mär 10 18:41:59 matt kernel: ... generic registers: 2
Mär 10 18:41:59 matt kernel: ... value mask: 000000ffffffffff
Mär 10 18:41:59 matt kernel: ... max period: 000000007fffffff
Mär 10 18:41:59 matt kernel: ... fixed-purpose events: 3
Mär 10 18:41:59 matt kernel: ... event mask: 0000000700000003
Mär 10 18:41:59 matt kernel: CPU 1 irqstacks, hard=f64cc000 soft=f64ce000
Mär 10 18:41:59 matt kernel: x86: Booting SMP configuration:
Mär 10 18:41:59 matt kernel: Initializing CPU#1
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: CPU1: Thermal monitoring handled by SMI
Mär 10 18:41:59 matt kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mär 10 18:41:59 matt kernel: .... node #0, CPUs: #1
Mär 10 18:41:59 matt kernel: x86: Booted up 1 node, 2 CPUs
Mär 10 18:41:59 matt kernel: smpboot: Total of 2 processors activated (6386.96 BogoMIPS)
Mär 10 18:41:59 matt kernel: devtmpfs: initialized
Mär 10 18:41:59 matt kernel: PM: Registering ACPI NVS region [mem 0x3f7ce000-0x3f7fffff] (204800 bytes)
Mär 10 18:41:59 matt kernel: RTC time: 17:41:46, date: 03/10/14
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 16
Mär 10 18:41:59 matt kernel: cpuidle: using governor ladder
Mär 10 18:41:59 matt kernel: cpuidle: using governor menu
Mär 10 18:41:59 matt kernel: ACPI: bus type PCI registered
Mär 10 18:41:59 matt kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mär 10 18:41:59 matt kernel: PCI: not using MMCONFIG
Mär 10 18:41:59 matt kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
Mär 10 18:41:59 matt kernel: PCI: Using configuration type 1 for base access
Mär 10 18:41:59 matt kernel: bio: create slab <bio-0> at 0
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Module Device)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Processor Device)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mär 10 18:41:59 matt kernel: ACPI: Executed 1 blocks of module-level executable AML code
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce190 000285 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000285 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce4b0 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce0c0 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce420 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Interpreter enabled
Mär 10 18:41:59 matt kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
Mär 10 18:41:59 matt kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
Mär 10 18:41:59 matt kernel: ACPI: (supports S0 S3 S4 S5)
Mär 10 18:41:59 matt kernel: ACPI: Using IOAPIC for interrupt routing
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
Mär 10 18:41:59 matt kernel: PCI: Using MMCONFIG for extended config space
Mär 10 18:41:59 matt kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mär 10 18:41:59 matt kernel: ACPI: No dock devices found.
Mär 10 18:41:59 matt kernel: ACPI: Power Resource [PFAN] (on)
Mär 10 18:41:59 matt kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Mär 10 18:41:59 matt kernel: PCI host bridge to bus 0000:00
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x10: [mem 0xfe980000-0xfe9fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x14: [io 0xcc80-0xcc87]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x1c: [mem 0xfe940000-0xfe97ffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.1: reg 0x10: [mem 0xfe880000-0xfe8fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfe938000-0xfe93bfff 64bit]
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: reg 0x20: [io 0xcc00-0xcc1f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: reg 0x20: [io 0xc880-0xc89f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: reg 0x20: [io 0xc800-0xc81f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: reg 0x20: [io 0xc480-0xc49f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfe937c00-0xfe937fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x20: [io 0xffa0-0xffaf]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: PME# supported from D3hot
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: [10ec:8199] type 00 class 0x028000
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: reg 0x10: [io 0xdc00-0xdcff]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: reg 0x14: [mem 0xfeafc000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: supports D1 D2
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: [1106:3053] type 00 class 0x020000
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: reg 0x10: [io 0xec00-0xecff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: supports D1 D2
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xdfffffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xfed8ffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: on NUMA node 0
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
Mär 10 18:41:59 matt kernel: ACPI: \_SB_.PCI0: notify handler is installed
Mär 10 18:41:59 matt kernel: Found 1 acpi root devices
Mär 10 18:41:59 matt kernel: ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Mär 10 18:41:59 matt kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Mär 10 18:41:59 matt kernel: vgaarb: loaded
Mär 10 18:41:59 matt kernel: vgaarb: bridge control possible 0000:00:02.0
Mär 10 18:41:59 matt kernel: PCI: Using ACPI for IRQ routing
Mär 10 18:41:59 matt kernel: PCI: pci_cache_line_size set to 64 bytes
Mär 10 18:41:59 matt kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Mär 10 18:41:59 matt kernel: e820: reserve RAM buffer [mem 0x3f7c0000-0x3fffffff]
Mär 10 18:41:59 matt kernel: NetLabel: Initializing
Mär 10 18:41:59 matt kernel: NetLabel: domain hash size = 128
Mär 10 18:41:59 matt kernel: NetLabel: protocols = UNLABELED CIPSOv4
Mär 10 18:41:59 matt kernel: NetLabel: unlabeled traffic allowed by default
Mär 10 18:41:59 matt kernel: hpet clockevent registered
Mär 10 18:41:59 matt kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Mär 10 18:41:59 matt kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mär 10 18:41:59 matt kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Mär 10 18:41:59 matt kernel: Switched to clocksource hpet
Mär 10 18:41:59 matt kernel: pnp: PnP ACPI init
Mär 10 18:41:59 matt kernel: ACPI: bus type PNP registered
Mär 10 18:41:59 matt kernel: system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Mär 10 18:41:59 matt kernel: pnp 00:01: [dma 4]
Mär 10 18:41:59 matt kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Mär 10 18:41:59 matt kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Mär 10 18:41:59 matt kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Mär 10 18:41:59 matt kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Mär 10 18:41:59 matt kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
Mär 10 18:41:59 matt kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
Mär 10 18:41:59 matt kernel: system 00:07: [io 0x0a00-0x0a0f] has been reserved
Mär 10 18:41:59 matt kernel: system 00:07: [io 0x0a30-0x0a3f] has been reserved
Mär 10 18:41:59 matt kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x0800-0x087f] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x0480-0x04bf] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x00100000-0x3f7fffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Mär 10 18:41:59 matt kernel: pnp: PnP ACPI: found 12 devices
Mär 10 18:41:59 matt kernel: ACPI: bus type PNP unregistered
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 9 [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 8 [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 9 [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 2
Mär 10 18:41:59 matt kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Mär 10 18:41:59 matt kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Mär 10 18:41:59 matt kernel: TCP: Hash tables configured (established 8192 bind 8192)
Mär 10 18:41:59 matt kernel: TCP: reno registered
Mär 10 18:41:59 matt kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 1
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: Boot video device
Mär 10 18:41:59 matt kernel: PCI: CLS 32 bytes, default 64
Mär 10 18:41:59 matt kernel: Unpacking initramfs...
Mär 10 18:41:59 matt kernel: Freeing initrd memory: 4280K (f73d0000 - f77fe000)
Mär 10 18:41:59 matt kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mär 10 18:41:59 matt kernel: apm: disabled - APM is not SMP safe.
Mär 10 18:41:59 matt kernel: Scanning for low memory corruption every 60 seconds
Mär 10 18:41:59 matt kernel: audit: initializing netlink socket (disabled)
Mär 10 18:41:59 matt kernel: type=2000 audit(1394473306.599:1): initialized
Mär 10 18:41:59 matt kernel: bounce pool size: 64 pages
Mär 10 18:41:59 matt kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Mär 10 18:41:59 matt kernel: zbud: loaded
Mär 10 18:41:59 matt kernel: VFS: Disk quotas dquot_6.5.2
Mär 10 18:41:59 matt kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mär 10 18:41:59 matt kernel: msgmni has been set to 1738
Mär 10 18:41:59 matt kernel: Key type big_key registered
Mär 10 18:41:59 matt kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Mär 10 18:41:59 matt kernel: io scheduler noop registered
Mär 10 18:41:59 matt kernel: io scheduler deadline registered
Mär 10 18:41:59 matt kernel: io scheduler cfq registered (default)
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mär 10 18:41:59 matt kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Mär 10 18:41:59 matt kernel: intel_idle: MWAIT substates: 0x20220
Mär 10 18:41:59 matt kernel: intel_idle: v0.4 model 0x1C
Mär 10 18:41:59 matt kernel: intel_idle: lapic_timer_reliable_states 0x2
Mär 10 18:41:59 matt kernel: tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
Mär 10 18:41:59 matt kernel: GHES: HEST is not enabled!
Mär 10 18:41:59 matt kernel: isapnp: Scanning for PnP cards...
Mär 10 18:41:59 matt kernel: isapnp: No Plug & Play device found
Mär 10 18:41:59 matt kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: RTC can wake from S4
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
Mär 10 18:41:59 matt kernel: drop_monitor: Initializing network drop monitor service
Mär 10 18:41:59 matt kernel: TCP: cubic registered
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 10
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 17
Mär 10 18:41:59 matt kernel: Key type dns_resolver registered
Mär 10 18:41:59 matt kernel: Using IPI No-Shortcut mode
Mär 10 18:41:59 matt kernel: registered taskstats version 1
Mär 10 18:41:59 matt kernel: Magic number: 6:667:693
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: setting system clock to 2014-03-10 17:41:47 UTC (1394473307)
Mär 10 18:41:59 matt kernel: PM: Hibernation image not present or could not be loaded.
Mär 10 18:41:59 matt kernel: Freeing unused kernel memory: 588K (c071b000 - c07ae000)
Mär 10 18:41:59 matt kernel: Write protecting the kernel text: 4476k
Mär 10 18:41:59 matt kernel: Write protecting the kernel read-only data: 1324k
Mär 10 18:41:59 matt kernel: random: systemd-tmpfile urandom read with 2 bits of entropy available
Mär 10 18:41:59 matt systemd-udevd[47]: starting version 210
Mär 10 18:41:59 matt kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Mär 10 18:41:59 matt kernel: i8042: Detected active multiplexing controller, rev 1.1
Mär 10 18:41:59 matt kernel: ACPI: bus type USB registered
Mär 10 18:41:59 matt kernel: usbcore: registered new interface driver usbfs
Mär 10 18:41:59 matt kernel: usbcore: registered new interface driver hub
Mär 10 18:41:59 matt kernel: SCSI subsystem initialized
Mär 10 18:41:59 matt kernel: usbcore: registered new device driver usb
Mär 10 18:41:59 matt kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mär 10 18:41:59 matt kernel: uhci_hcd: USB Universal Host Controller Interface driver
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
Mär 10 18:41:59 matt kernel: ehci-pci: EHCI PCI platform driver
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: debug port 1
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe937c00
Mär 10 18:41:59 matt kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mär 10 18:41:59 matt kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: libata version 3.00 loaded.
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mär 10 18:41:59 matt kernel: hub 3-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 3-0:1.0: 8 ports detected
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
Mär 10 18:41:59 matt kernel: hub 4-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 4-0:1.0: 2 poScimmia wrote:Acer Aspire, by any chance? There was a thread on this earlier.
No it's a Noname Netbook. It runs without a graphical user interface (only as a server).
I've downgraded to systemd 208-11 and systemd-sysvcompat 208-11 and the error is gone. So it is definitely a systemd thing.
EDIT:
I figure it is related to this from http://lists.freedesktop.org/archives/s … 17362.html:
* logind is now a lot more aggressive when suspending the
machine due to a closed laptop lid. Instead of acting only
on the lid close action it will continuously watch the lid
status and act on it. This is useful for laptops where the
power button is on the outside of the chassis so that it can
be reached without opening the lid (such as the Lenovo
Yoga). On those machines logind will now immediately
re-suspend the machine if the power button has been
accidentally pressed while the laptop was suspended and in a
backpack or similar.
EDIT2:
Now that I knew what caused this, I googled for "logind suspend lid laptop 210" and found this other thread with the solution.
Last edited by akurei (2014-03-11 19:41:55) -
Possible Video Card problem while running 3d applications on wine
Hello guys, I got an issue with wine running 3d games/applications on the netbook and I thought this was the right place to post, since I'm pretty new to Arch, sorry if I messed something up with the sections.
Long story short: The applications/games I "tested" are Football Manager 2013 (via Steam) and Nintendo64 emulator. I didn't post on the wine forums since I'm pretty sure it's not a wine related problem, due to the fact that on my desktop both work without any problem with same wine and Arch configuration.
The netbook as an integrated Intel video, while the desktop has a nvidia card.
So I'm assuming there something wrong with the video card/drivers/configuration even if X runs good and seem configured correctly.
When I run those games with wine i get the following error and I get a black screen on wine:
@ swapchain.c / 338
fixme:d3d:context_check_fbo_status FBO status GL_FRAMEBUFFER_UNSUPPORTED (0x8cdd)
fixme:d3d:context_check_fbo_status Location SFLAG_INTEXTURE (0x40000).
fixme:d3d:context_check_fbo_status Color attachment 0: (0x1b8cf0) WINED3DFMT_B8G8R8X8_UNORM 1024x768 0 samples.
err:d3d:wined3d_debug_callback 0x1b75b8: "GL_INVALID_FRAMEBUFFER_OPERATION in glBlitFramebufferEXT(incomplete draw/read buffers)".
err:d3d:swapchain_blit >>>>>>>>>>>>>>>>> GL_INVALID_FRAMEBUFFER_OPERATION (0x506) from Swapchain present blit(EXT_framebuffer_blit)
and the thing is Football Manager doesn't need much graphics, since games can be played even in 2d.
I searched for the error but I didn't find anything, that's why I'm asking!
Thanks in advance to everyone who'll help.MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008.
MacBook Pro (Early 2008): Dark bands showing intermittently on built-in display -
[Solved] no DE working after upgrade
Hi today i've updgraded my Arch system in my netbook but after rebooting it couldn't anymore log into Xfce session or openbox session because i obtain this error:
/usr/bin/xfce4-session: error while loading shared libraries: libpng14.so.14 cannot open shared object file: no usch file or directory
How can i fix this? Thanks
Last edited by toketin (2010-01-24 19:01:58)ok this is the log:
[2010-01-18 10:45] upgraded live-media (2010.01.11-1 -> 2010.01.13-1)
[2010-01-18 10:45] installed talloc (2.0.1-1)
[2010-01-18 10:45] upgraded smbclient (3.4.3-4 -> 3.4.4-1.1)
[2010-01-18 10:45] upgraded mplayer (30286-1 -> 30325-1)
[2010-01-18 10:45] Place menu.xml, rc.xml and autostart.sh in ~/.config/openbox
[2010-01-18 10:45] They can be found in /etc/xdg/openbox
[2010-01-18 10:45] upgraded openbox (3.4.10-1 -> 3.4.10-2)
[2010-01-18 10:45] upgraded patch (2.6-1 -> 2.6.1-1)
[2010-01-18 10:45] upgraded python-urwid (0.9.8.4-1 -> 0.9.9-1)
[2010-01-18 10:45] upgraded xfsprogs (3.0.5-1 -> 3.1.0-1)
[2010-01-18 20:55] installed libgee (0.5.0-1)
[2010-01-18 20:55] installed pino (0.1.3-1)
[2010-01-18 21:27] installed gwibber-trunk-bzr (491-1)
[2010-01-21 14:46] upgraded chromium-browser-bin (36232-1 -> 36748-1)
[2010-01-24 13:21] synchronizing package lists
[2010-01-24 13:22] starting full system upgrade
[2010-01-24 13:28] upgraded cairo-lcd (1.8.8-1 -> 1.8.8-2)
[2010-01-24 13:28] upgraded coreutils (8.2-1 -> 8.4-1)
[2010-01-24 13:28] ATTENTION DB PACKAGE:
[2010-01-24 13:28] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
[2010-01-24 13:28] upgraded db (4.8.24-1 -> 4.8.26-1)
[2010-01-24 13:28] upgraded dirmngr (1.0.2-2 -> 1.0.3-1)
[2010-01-24 13:28] upgraded farsight2 (0.0.16-1 -> 0.0.17-1)
[2010-01-24 13:28] upgraded git (1.6.6-1 -> 1.6.6.1-1)
[2010-01-24 13:28] upgraded gzip (1.3.13-1 -> 1.4-1)
[2010-01-24 13:28] upgraded iproute2 (2.6.29-3 -> 2.6.31-1)
[2010-01-24 13:28] upgraded json-glib (0.8.0-1 -> 0.10.0-1)
[2010-01-24 13:28] upgraded kernel26-firmware (2.6.32.3-1 -> 2.6.32.5-1)
[2010-01-24 13:28] >>> Updating module dependencies. Please wait ...
[2010-01-24 13:28] >>> MKINITCPIO SETUP
[2010-01-24 13:28] >>> ----------------
[2010-01-24 13:28] >>> If you use LVM2, Encrypted root or software RAID,
[2010-01-24 13:28] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-01-24 13:28] >>> More information about mkinitcpio setup can be found here:
[2010-01-24 13:28] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-01-24 13:28]
[2010-01-24 13:28] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-01-24 13:28] ==> Building image "default"
[2010-01-24 13:28] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-01-24 13:28] :: Begin build
[2010-01-24 13:28] :: Parsing hook [base]
[2010-01-24 13:28] :: Parsing hook [udev]
[2010-01-24 13:28] :: Parsing hook [autodetect]
[2010-01-24 13:28] :: Parsing hook [pata]
[2010-01-24 13:28] :: Parsing hook [scsi]
[2010-01-24 13:28] :: Parsing hook [sata]
[2010-01-24 13:28] :: Parsing hook [filesystems]
[2010-01-24 13:28] :: Generating module dependencies
[2010-01-24 13:28] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-01-24 13:28] ==> SUCCESS
[2010-01-24 13:28] ==> Building image "fallback"
[2010-01-24 13:28] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-01-24 13:28] :: Begin build
[2010-01-24 13:28] :: Parsing hook [base]
[2010-01-24 13:28] :: Parsing hook [udev]
[2010-01-24 13:28] :: Parsing hook [pata]
[2010-01-24 13:29] :: Parsing hook [scsi]
[2010-01-24 13:29] :: Parsing hook [sata]
[2010-01-24 13:29] :: Parsing hook [filesystems]
[2010-01-24 13:29] :: Generating module dependencies
[2010-01-24 13:30] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-01-24 13:30] ==> SUCCESS
[2010-01-24 13:30] upgraded kernel26 (2.6.32.3-1 -> 2.6.32.5-1)
[2010-01-24 13:30] upgraded kernel26-headers (2.6.32.3-1 -> 2.6.32.5-1)
[2010-01-24 13:30] upgraded minitube (0.8.1-2 -> 0.9-1)
[2010-01-24 13:30] upgraded pciutils (3.1.4-1 -> 3.1.5-1)
[2010-01-24 13:30] upgraded psmisc (22.8-1 -> 22.10-1)
[2010-01-24 13:30] upgraded purple-plugin-pack (2.6.1-1 -> 2.6.2-1)
[2010-01-24 13:30] upgraded rasqal (0.9.16-1 -> 0.9.17-1)
[2010-01-24 13:30] upgraded redland (1.0.9-4 -> 1.0.10-1)
[2010-01-24 13:30] upgraded skype (2.1.0.47-2 -> 2.1.0.81-2)
[2010-01-24 13:30] upgraded smbclient (3.4.4-1.1 -> 3.4.5-1.1)
[2010-01-24 13:30] upgraded twisted (9.0.0-1 -> 9.0.0-2)
[2010-01-24 13:30] upgraded tzdata (2009t-1 -> 2010a-1)
[2010-01-24 13:30] upgraded whois (4.7.36-1 -> 5.0.0-1)
[2010-01-24 13:30] upgraded wicd (1.6.2.2-3 -> 1.7.0-1)
[2010-01-24 13:30] upgraded wine (1.1.36-1 -> 1.1.37-1)
[2010-01-24 13:30] upgraded zlib (1.2.3.4-3 -> 1.2.3.4-4)
[2010-01-24 13:46] removed cairo-lcd (1.8.8-2)
[2010-01-24 13:53] upgraded xorg-server (1.7.3.902-1 -> 1.7.3.902-1)
[2010-01-24 13:54] installed cairo-lcd (1.8.8-2)
[2010-01-24 13:58] Updating font cache... done.
[2010-01-24 13:58] upgraded ttf-droid (20092411-1 -> 20092411-1)
[2010-01-24 14:04] synchronizing package lists
[2010-01-24 14:04] upgraded libpng (1.2.40-1 -> 1.4.0-1)
[2010-01-24 14:09] synchronizing package lists
[2010-01-24 14:09] starting full system upgrade
[2010-01-24 14:16] removed kernel-headers (2.6.32-1)
[2010-01-24 14:16] upgraded cairomm (1.8.2-1 -> 1.8.4-1)
[2010-01-24 14:16] warning: /etc/logrotate.d/crond installed as /etc/logrotate.d/crond.pacnew
[2010-01-24 14:16] upgraded dcron (3.2-4 -> 4.4-1)
[2010-01-24 14:16] upgraded device-mapper (2.02.53-1 -> 2.02.56-1)
[2010-01-24 14:16] upgraded libjpeg (7-1 -> 8-1)
[2010-01-24 14:16] upgraded libtiff (3.9.2-1 -> 3.9.2-2)
[2010-01-24 14:16] upgraded lcms (1.18-2 -> 1.18-3)
[2010-01-24 14:16] upgraded libcups (1.4.2-2 -> 1.4.2-3)
[2010-01-24 14:16] upgraded gtk2 (2.18.5-1 -> 2.18.6-1)
[2010-01-24 14:17] upgraded eog (2.28.2-1 -> 2.28.2-2)
[2010-01-24 14:17] upgraded file (5.03-2 -> 5.04-1)
[2010-01-24 14:17] upgraded xulrunner (1.9.1.7-1 -> 1.9.2-2)
[2010-01-24 14:17] upgraded firefox (3.5.7-1 -> 3.6-2)
[2010-01-24 14:17] upgraded firefox-i18n (3.5.7-1 -> 3.6-1)
[2010-01-24 14:17] upgraded gegl (0.1.0-1 -> 0.1.0-2)
[2010-01-24 14:17] upgraded jasper (1.900.1-3 -> 1.900.1-4)
[2010-01-24 14:17] upgraded ghostscript (8.70-3 -> 8.70-4)
[2010-01-24 14:17] upgraded libmng (1.0.10-2 -> 1.0.10-3)
[2010-01-24 14:17] upgraded librsvg (2.26.0-1 -> 2.26.0-2)
[2010-01-24 14:17] upgraded libwmf (0.2.8.4-5 -> 0.2.8.4-7)
[2010-01-24 14:17] upgraded gimp (2.6.8-1 -> 2.6.8-2)
[2010-01-24 14:17] upgraded pcre (8.00-1 -> 8.01-1)
[2010-01-24 14:17] upgraded glib2 (2.22.3-1 -> 2.22.4-1)
[2010-01-24 14:17] upgraded gstreamer0.10-good (0.10.17-1 -> 0.10.17-2)
[2010-01-24 14:17] upgraded imlib2 (1.4.2-3 -> 1.4.2-6)
[2010-01-24 14:17] upgraded gstreamer0.10-good-plugins (0.10.17-1 -> 0.10.17-2)
[2010-01-24 14:17] upgraded imagemagick (6.5.8.5-1 -> 6.5.9.0-2)
[2010-01-24 14:17] upgraded util-linux-ng (2.16.2-1 -> 2.17-1)
[2010-01-24 14:17] upgraded udev (146-2 -> 150-1)
[2010-01-24 14:17] upgraded initscripts (2009.08-1 -> 2009.11-1)
[2010-01-24 14:17] installed linux-api-headers (2.6.32.5-1)
[2010-01-24 14:17] upgraded libcap (2.17-1 -> 2.19-1)
[2010-01-24 14:17] upgraded libdjvu (3.5.22-2 -> 3.5.22-3)
[2010-01-24 14:17] upgraded libdrm (2.4.17-2 -> 2.4.17-3)
[2010-01-24 14:17] upgraded libgdiplus (2.6-1 -> 2.6-2)
[2010-01-24 14:17] upgraded libgphoto2 (2.4.7-1 -> 2.4.7-2)
[2010-01-24 14:17] upgraded sqlite3 (3.6.21-1 -> 3.6.22-1)
[2010-01-24 14:17] upgraded libwebkit (1.1.15.4-2 -> 1.1.15.4-3)
[2010-01-24 14:17] upgraded lvm2 (2.02.53-1 -> 2.02.56-1)
[2010-01-24 14:17] upgraded mdadm (2.6.9-1 -> 3.1.1-1)
[2010-01-24 14:17] upgraded mjpegtools (1.9.0-2 -> 1.9.0-3)
[2010-01-24 14:17] upgraded mplayer (30325-1 -> 30325-2)
[2010-01-24 14:17] upgraded nano (2.2.1-1 -> 2.2.2-1)
[2010-01-24 14:17] upgraded netcfg (2.2.1-1 -> 2.5.0rc2-1)
[2010-01-24 14:17] upgraded networkmanager (0.7.2-1 -> 0.7.999-1)
[2010-01-24 14:17] upgraded network-manager-applet (0.7.2-1 -> 0.7.999-1)
[2010-01-24 14:17] upgraded networkmanager-openvpn (0.7.2-3 -> 0.7.999-1)
[2010-01-24 14:17] upgraded nitrogen (1.4-2 -> 1.5-1)
[2010-01-24 14:17] upgraded pcmciautils (015-2 -> 016-1)
[2010-01-24 14:17] upgraded pil (1.1.7-1 -> 1.1.7-2)
[2010-01-24 14:17] upgraded pilot-link (0.12.4-1 -> 0.12.4-2)
[2010-01-24 14:17] upgraded pm-utils (1.2.6.1-3 -> 1.2.6.1-4)
[2010-01-24 14:17] upgraded poppler (0.12.2-1 -> 0.12.3-1)
[2010-01-24 14:17] upgraded poppler-glib (0.12.2-1 -> 0.12.3-1)
[2010-01-24 14:17] upgraded qt (4.5.3-3 -> 4.5.3-4)
[2010-01-24 14:17] upgraded qt3 (3.3.8-13 -> 3.3.8-14)
[2010-01-24 14:17] upgraded redland (1.0.10-1 -> 1.0.10-2)
[2010-01-24 14:17] upgraded sdl_image (1.2.10-1 -> 1.2.10-2)
[2010-01-24 14:17] upgraded slim (1.3.1-5 -> 1.3.1-6)
[2010-01-24 14:17] upgraded sox (14.3.0-2 -> 14.3.0-3)
[2010-01-24 14:17] upgraded thunar (1.0.1-4 -> 1.0.1-5)
[2010-01-24 14:17] upgraded zvbi (0.2.33-1 -> 0.2.33-2)
[2010-01-24 14:17] upgraded vlc (1.0.4-3 -> 1.0.4-5)
[2010-01-24 14:17] upgraded wxgtk (2.8.10.1-5 -> 2.8.10.1-6)
[2010-01-24 14:17] upgraded xf86-video-intel (2.9.1-1 -> 2.9.99.902-1)
[2010-01-24 14:17] upgraded xine-lib (1.1.17-2 -> 1.1.17-3)
[2010-01-24 14:17] upgraded xorg-apps (7.5-2 -> 7.5-3)
[2010-01-24 14:17] upgraded xz-utils (4.999.9beta-1 -> 4.999.9beta-2)
[2010-01-24 14:23] starting full system upgrade
[2010-01-24 14:24] starting full system upgrade
[2010-01-24 14:24] synchronizing package lists
[2010-01-24 14:26] starting full system upgrade
[2010-01-24 14:29] starting full system upgrade
[2010-01-24 14:36] upgraded cairomm (1.8.4-1 -> 1.8.2-1)
[2010-01-24 14:36] warning: /etc/logrotate.d/crond saved as /etc/logrotate.d/crond.pacsave
[2010-01-24 14:36] upgraded dcron (4.4-1 -> 3.2-4)
[2010-01-24 14:36] upgraded device-mapper (2.02.56-1 -> 2.02.53-1)
[2010-01-24 14:36] upgraded libjpeg (8-1 -> 7-1)
[2010-01-24 14:36] upgraded libtiff (3.9.2-2 -> 3.9.2-1)
[2010-01-24 14:36] upgraded lcms (1.18-3 -> 1.18-2)
[2010-01-24 14:36] upgraded eog (2.28.2-2 -> 2.28.2-1)
[2010-01-24 14:36] upgraded file (5.04-1 -> 5.03-2)
[2010-01-24 14:36] upgraded libpng (1.4.0-1 -> 1.2.40-1)
[2010-01-24 14:36] upgraded libcups (1.4.2-3 -> 1.4.2-2)
[2010-01-24 14:36] upgraded gtk2 (2.18.6-1 -> 2.18.5-1)
[2010-01-24 14:36] upgraded xulrunner (1.9.2-2 -> 1.9.1.7-1)
[2010-01-24 14:37] upgraded firefox (3.6-2 -> 3.5.7-1)
[2010-01-24 14:37] upgraded firefox-i18n (3.6-1 -> 3.5.7-1)
[2010-01-24 14:37] upgraded gegl (0.1.0-2 -> 0.1.0-1)
[2010-01-24 14:37] upgraded jasper (1.900.1-4 -> 1.900.1-3)
[2010-01-24 14:37] upgraded ghostscript (8.70-4 -> 8.70-3)
[2010-01-24 14:37] upgraded libmng (1.0.10-3 -> 1.0.10-2)
[2010-01-24 14:37] upgraded librsvg (2.26.0-2 -> 2.26.0-1)
[2010-01-24 14:37] upgraded libwmf (0.2.8.4-7 -> 0.2.8.4-5)
[2010-01-24 14:37] upgraded gimp (2.6.8-2 -> 2.6.8-1)
[2010-01-24 14:37] upgraded pcre (8.01-1 -> 8.00-1)
[2010-01-24 14:37] upgraded glib2 (2.22.4-1 -> 2.22.3-1)
[2010-01-24 14:37] upgraded gstreamer0.10-good (0.10.17-2 -> 0.10.17-1)
[2010-01-24 14:37] upgraded gstreamer0.10-good-plugins (0.10.17-2 -> 0.10.17-1)
[2010-01-24 14:37] upgraded imagemagick (6.5.9.0-2 -> 6.5.8.5-1)
[2010-01-24 14:37] upgraded imlib2 (1.4.2-6 -> 1.4.2-3)
[2010-01-24 14:37] upgraded util-linux-ng (2.17-1 -> 2.16.2-1)
[2010-01-24 14:37] upgraded udev (150-1 -> 146-2)
[2010-01-24 14:37] upgraded initscripts (2009.11-1 -> 2009.08-1)
[2010-01-24 14:37] upgraded libcap (2.19-1 -> 2.17-1)
[2010-01-24 14:37] upgraded libdjvu (3.5.22-3 -> 3.5.22-2)
[2010-01-24 14:37] upgraded libdrm (2.4.17-3 -> 2.4.17-2)
[2010-01-24 14:37] upgraded libgdiplus (2.6-2 -> 2.6-1)
[2010-01-24 14:37] upgraded libgphoto2 (2.4.7-2 -> 2.4.7-1)
[2010-01-24 14:37] upgraded sqlite3 (3.6.22-1 -> 3.6.21-1)
[2010-01-24 14:37] upgraded libwebkit (1.1.15.4-3 -> 1.1.15.4-2)
[2010-01-24 14:37] upgraded lvm2 (2.02.56-1 -> 2.02.53-1)
[2010-01-24 14:37] upgraded mdadm (3.1.1-1 -> 2.6.9-1)
[2010-01-24 14:37] upgraded mjpegtools (1.9.0-3 -> 1.9.0-2)
[2010-01-24 14:37] upgraded mplayer (30325-2 -> 30325-1)
[2010-01-24 14:37] upgraded nano (2.2.2-1 -> 2.2.1-1)
[2010-01-24 14:37] upgraded netcfg (2.5.0rc2-1 -> 2.2.1-1)
[2010-01-24 14:37] upgraded networkmanager (0.7.999-1 -> 0.7.2-1)
[2010-01-24 14:37] upgraded network-manager-applet (0.7.999-1 -> 0.7.2-1)
[2010-01-24 14:37] upgraded networkmanager-openvpn (0.7.999-1 -> 0.7.2-3)
[2010-01-24 14:37] upgraded nitrogen (1.5-1 -> 1.4-2)
[2010-01-24 14:37] upgraded pcmciautils (016-1 -> 015-2)
[2010-01-24 14:37] upgraded pil (1.1.7-2 -> 1.1.7-1)
[2010-01-24 14:37] upgraded pilot-link (0.12.4-2 -> 0.12.4-1)
[2010-01-24 14:37] upgraded pm-utils (1.2.6.1-4 -> 1.2.6.1-3)
[2010-01-24 14:37] upgraded poppler (0.12.3-1 -> 0.12.2-1)
[2010-01-24 14:37] upgraded poppler-glib (0.12.3-1 -> 0.12.2-1)
[2010-01-24 14:37] upgraded python-mako (0.2.5-3 -> 0.2.5-1)
[2010-01-24 14:37] upgraded qt (4.5.3-4 -> 4.5.3-3)
[2010-01-24 14:37] upgraded qt3 (3.3.8-14 -> 3.3.8-13)
[2010-01-24 14:37] upgraded redland (1.0.10-2 -> 1.0.10-1)
[2010-01-24 14:37] upgraded sdl_image (1.2.10-2 -> 1.2.10-1)
[2010-01-24 14:37] upgraded slim (1.3.1-6 -> 1.3.1-5)
[2010-01-24 14:37] upgraded sox (14.3.0-3 -> 14.3.0-2)
[2010-01-24 14:37] upgraded thunar (1.0.1-5 -> 1.0.1-4)
[2010-01-24 14:37] upgraded zvbi (0.2.33-2 -> 0.2.33-1)
[2010-01-24 14:37] upgraded vlc (1.0.4-5 -> 1.0.4-3)
[2010-01-24 14:37] upgraded wxgtk (2.8.10.1-6 -> 2.8.10.1-5)
[2010-01-24 14:37] upgraded xf86-video-intel (2.9.99.902-1 -> 2.9.1-1)
[2010-01-24 14:37] upgraded xine-lib (1.1.17-3 -> 1.1.17-2)
[2010-01-24 14:37] upgraded xorg-apps (7.5-3 -> 7.5-2)
[2010-01-24 14:47] synchronizing package lists
[2010-01-24 14:47] starting full system upgrade
[2010-01-24 15:04] Place menu.xml, rc.xml and autostart.sh in ~/.config/openbox
[2010-01-24 15:04] They can be found in /etc/xdg/openbox
[2010-01-24 15:04] upgraded openbox (3.4.10-2 -> 3.4.10-2)
[2010-01-24 15:14] upgraded libpng (1.2.40-1 -> 1.2.40-1)
[2010-01-24 15:21] upgraded libxfce4util (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded exo (0.3.106-1 -> 0.3.106-1)
[2010-01-24 15:21] upgraded gtk-xfce-engine (2.6.0-1 -> 2.6.0-1)
[2010-01-24 15:21] upgraded libxfce4menu (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded xfconf (4.6.1-3 -> 4.6.1-3)
[2010-01-24 15:21] upgraded libxfcegui4 (4.6.2-1 -> 4.6.2-1)
[2010-01-24 15:21] upgraded mousepad (0.2.16-2 -> 0.2.16-2)
[2010-01-24 15:21] upgraded xfce4-panel (4.6.3-1 -> 4.6.3-1)
[2010-01-24 15:21] upgraded orage (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded thunar (1.0.1-4 -> 1.0.1-4)
[2010-01-24 15:21]
[2010-01-24 15:21] NOTE for squeeze:
[2010-01-24 15:21] ----
[2010-01-24 15:21] ==> please install bzip2, gzip, unrar, zip, unzip and lzop
[2010-01-24 15:21] ==> to use all of squeeze's capabilities
[2010-01-24 15:21] upgraded squeeze (0.2.3-2 -> 0.2.3-2)
[2010-01-24 15:21] upgraded terminal (0.4.3-1 -> 0.4.3-1)
[2010-01-24 15:21] upgraded xfce-utils (4.6.1-2 -> 4.6.1-2)
[2010-01-24 15:21] upgraded xfce4-appfinder (4.6.1-2 -> 4.6.1-2)
[2010-01-24 15:21] upgraded xfce4-icon-theme (4.4.3-1 -> 4.4.3-1)
[2010-01-24 15:21] upgraded xfce4-mixer (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded xfce4-session (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded xfce4-settings (4.6.4-1 -> 4.6.4-1)
[2010-01-24 15:21] upgraded xfdesktop (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded xfprint (4.6.1-2 -> 4.6.1-2)
[2010-01-24 15:21] upgraded xfwm4 (4.6.1-1 -> 4.6.1-1)
[2010-01-24 15:21] upgraded xfwm4-themes (4.6.0-1 -> 4.6.0-1)
[2010-01-24 15:36] removed libpng (1.2.40-1)
[2010-01-24 15:36] installed libpng (1.2.40-1)
[2010-01-24 15:43] removed notify-osd-bzr (407-1)
[2010-01-24 15:43] installed epiphany (2.28.2-1)
[2010-01-24 15:43] installed gucharmap (2.28.2-1)
[2010-01-24 15:43] upgraded gnome-desktop (2.28.2-1 -> 2.28.2-1)
[2010-01-24 15:43] upgraded gnome-panel (2.28.0-2 -> 2.28.0-2)
[2010-01-24 15:43] installed gnome-applets (2.28.0-2)
[2010-01-24 15:43] installed gnome-backgrounds (2.28.0-1)
[2010-01-24 15:44] installed metacity (2.28.0-2)
[2010-01-24 15:44] installed gnome-settings-daemon (2.28.1-1)
[2010-01-24 15:44] installed gnome-control-center (2.28.1-1)
[2010-01-24 15:44] upgraded gnome-icon-theme (2.28.0-1 -> 2.28.0-1)
[2010-01-24 15:44] upgraded gnome-media (2.28.1-1 -> 2.28.1-1)
[2010-01-24 15:44] upgraded gnome-mime-data (2.18.0-4 -> 2.18.0-4)
[2010-01-24 15:44] installed gnome-screensaver (2.28.0-1)
[2010-01-24 15:44] installed gnome-session (2.28.0-1)
[2010-01-24 15:44] upgraded gnome-themes (2.28.1-1 -> 2.28.1-1)
[2010-01-24 15:44] installed yelp (2.28.1-1)
[2010-01-24 15:44] installed gnome2-user-docs (2.28.2-1)
[2010-01-24 15:44] upgraded libgail-gnome (1.20.1-1 -> 1.20.1-1)
[2010-01-24 15:44] installed nautilus (2.28.4-1)
[2010-01-24 15:44] installed notification-daemon (0.4.0-3)
[2010-01-24 15:46] starting full system upgrade
[2010-01-24 15:47] installed glib (1.2.10-8)
[2010-01-24 15:47] installed gtk (1.2.10-10)
[2010-01-24 15:47] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 15:53] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 15:55] upgraded libpng (1.2.40-1 -> 1.2.40-1)
[2010-01-24 15:55] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 15:56] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 15:57] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 16:01] installed gdk-pixbuf (0.22.0-6)
[2010-01-24 16:01] upgraded gtk2 (2.18.5-1 -> 2.18.5-1)
[2010-01-24 18:58] synchronizing package lists
[2010-01-24 18:59] starting full system upgrade
[2010-01-24 18:59] upgraded util-linux-ng (2.16.2-1 -> 2.17-1)
[2010-01-24 19:01] installed wgetpaste (2.14-1) -
[SOLVED] Need to change root password - current one doesn't work
Hey everybody,
Not sure where to put this, so I apologize if it's in the wrong forum.
I just installed Arch on my Dell netbook and all is well, except for issues with the root password. I am having a great deal of difficulty getting it to work. I know for a fact that I am typing it correctly. However, I did have trouble getting it set during the installation. When I try several times, I have gotten it to work, but I am getting tired of having to do that, and now I can't seem to get it to work at all. I have even tried a different keyboard, but with no luck.
Is there any way to change the root password short of a reinstall?
Thanks in advance for any help, but please keep in mind that I am relatively new to Linux and would greatly appreciate detailed instructions.
Jeff
Last edited by jlr1701 (2010-08-12 04:10:50)Solved. Should anyone else have this issue, I solved it by entering this command:
sudo passwd root
I set a new password and it seems to work fine.
Didn't know if it was possible to change the root password that way, but glad it worked! -
Hello everybody,
I've just installed Arch 2009.02 in my Acer Aspire One, and I upgraded full system. Everything seems to be working well, except for the X system. I did Xorg -configure to get a new xorg.conf, and when I did startx, there was no keyboard for me. Mouse and screen are working properly. After that, I made some of the adjustments as suggested in Wiki for Aspire One (http://wiki.archlinux.org/index.php/Acer_Aspire_One) to the xorg.conf file, and got the same: no keyboard. A few months ago, I was using Arch in another identical netbook, I did the same steps and everything worked fine. Dou you know how can I get this working? Is it a problem of new X.org software? Thank you for your help.
Strosek,
...sorry for any English mistakes...:/strosek,
the lack of keyboard could be due to the new xorg.
Please read:
http://wiki.archlinux.org/index.php/Xor … otplugging
With hotplugging don't forget to install "xf86-input-evdev"
Mektub -
-bash: iwconfig: command not found[SOLVED]
I'm having trouble connecting to my wireless network on my new Arch install on my netbook. Did I not install the wireless tools?
Last edited by Crouton351 (2010-07-19 04:38:39)> Did I not install the wireless tools?
And just how can I know that?
http://wiki.archlinux.org/index.php/Wifi
Maybe you are looking for
-
CAN'T CONNECT-self-assigned IP address
I haven't been able to connect to any networks for days. I keep getting this message in my network control panel under "status": airport is connected to the network ABC. airport has a self-assigned IP address and may not be able to connect to the int
-
How to track changes incrmd_order when employee responsible group is change
Hi experts crmd_order , nj supportrequest , when the employee responsible group is changed in need to trigger email to newly entered emp responsible group after saving. i need to know where this changes of service employee group is captured. how to s
-
Hi guys, You know how in Final Cut Pro there is a feature that lets you preview onto a DV cam or other firewire device, this lets me send my final cut project to my camera which is connected to my tv so I can preview my output, I got thinking of usin
-
Hello, I'm sorry if I ask a similar question again. I would like to add a 2nd display to the H520s 2561-1SU to extend the desktop. Is it possible to use the onboard vga and hdmi at the same time? What do I have to do for it?? Just plug n play? If not
-
This has been going on for a while. Its annoying, does anyone know how to solve this? Do i have to go to the genius bar?