Arch PPC failure on yaboot

Today i installed arch-ppc on an iBook G4 (ppc).
It seems that the installation was fine until the yaboot process, i got some problems related to of paths, after 'googling' about yaboot i installed it manually. My problem now is that when i boot the laptop i got the yaboot menu selection ('l', 'x' or 'c'), but choosing 'i' or 'x' gives me a blank white screen and the systems seems to be hung.
Now to boot macosx i need to press 'alt' key when booting and choose the macosx folder, or to move directly the MacosX partition before the Bootstrap one (where yaboot was installed).
I can´t try my arch system becouse i can´t boot into it.
These are my yaboot.conf and my partition scheme:
yaboot.conf:
boot=/dev/sda2
device=/disk@0:
partition=6
delay=10
timeout=40
install=/usr/lib/yaboot/yaboot
magicboot=/usr/lib/yaboot/ofboot
macosx=/dev/sda4
enablecdboot
image=/boot/vmlinux26
label=Linux
root=/dev/sda6
initrd=/boot/kernel26.img
read-only
partition=6
Partition scheme:
/dev/sda1 Apple_partition_map Apple Partition map
/dev/sda2 Apple_Bootstrap bootstrap NewWorld bootblock
/dev/sda3 Apple_Boot eXternal booter Unknow
/dev/sda4 Apple_HFS Apple_HFS_1 HFS <--- partition with main volume for macosx
/dev/sda5 Apple_HFS Apple_HFS_2 HFS
/dev/sda6 Apple_UFS Apple_HFS_3 Unknow <--- partition with linux
/dev/sda7 Apple_Free
/dev/sda8 Apple_Free
/dev/sda9 Apple_Free
Does anyone have any clue about what is happening and how could i solve this?
Thanks in advance.
Last edited by atuin (2010-11-03 01:24:04)

I tried messing around inside of OpenFirmware but was unsuccessful. I also tried uploading a patched copy of ofboot to my machine as a replacement for the faulty one. I replaced /disk@0: in my yaboot.conf file with hd: (for both the device and ofboot lines). Neither of these strategies worked out for me.
Would you mind giving the commands you used to solve the problem?
Edit: Nevermind, apparently my kernel did not install properly, and that's why Yaboot didn't see it.
Last edited by dmitri (2010-12-18 03:12:50)

Similar Messages

Arch PPC, a G4 and a Saturday

I had some spare time Saturday. Well, actually, I had plenty of stuff
to do, I just did not want to. I was sitting at my desk thinking of
anything that I could be doing besides what I should be doing
A shiny box in the corner of my office caught me eye!
I have two Apple G4 machines, both are 450MHz (Don't be a hater!)
My oldest son has one that he plays around with. It has OSX on it.
The other one was sitting in the corner of my office here at home.
It had OSX on it also. But it was not being used at all.
Trying Arch PPC on the G4 had been a plan for a while. The time to try
it had come. It was placed on "the rack". The shiny G4 was going to be
a file server!
The install went very well, and quick. There were only two hangups.
If I had taken the time to read before installing, the first problem would not
have been a problem at all. It was the issue with OpenSSH requiring heimdal.
And heimdal being in extra and not in core.
The second problem was after the install. The G4 was rebooted and I
was greeted with a screen full of scrolling text.
DEFAULT CATCH, code=300 at %SRR0:...
There was more on the line that I do not remember. That line looped
forever. My official opinion was "that ain't right". A Google search told
me that it might be trying the wrong partition and I needed to boot into
OpenFirmware (OF) and make it manually boot the correct partition.
Getting in OF was a challenge. Googling for ways to get into it gave
plenty of hits. After many failed attempts, I finally got in and told it
what to boot (boot hd:3,yaboot) and Arch PPC was running!
I had read that running "ybin" would fix the booting error. When the
system was fully up, ybin was ran. Then the system was rebooted and it came up
the way it should!
Then OpenSSH, Samba, ProFTP, and lighttpd was installed.
The total time it took, from start to finish, was under 45 mins.
Remember the stuff that I was trying to avoid doing? There was still
time left to do those things. Not good I needed to kill more time.
Why not add X and e17? Although neither of those would be
used much, if ever, on a file server. So what! I want to see how it
does with X running.
I installed X, firefox, thunar, terminal, x11vnc and e17.
I added 3 more HDs. Now there is a little over 1TB in the G4.
When everything was installed, startx.
The screenshot shows the CPU at 7%. That is not accurate. On average,
with X and e17 running, the CPU stays near 50%. X wont be used anyway.
The box will run headless. Without X running, the CPU stays at about 1%.
The G4 was placed in the location it will remain. Booted up (no X.)
Everything was tested, everything works.
All that added about 40 mins onto the time (e17 had to be compiled.)
And I still had plenty of time to mow the lawn

I'd buy that shirt!
Also: nicely done! I thought about installing Arch PPC on my iBook but then again, I'd miss Textmate. Maybe on a second partition ... later.
Last edited by mucknert (2008-05-13 11:56:45)

[SOLVED]Unable to boot eMac with Arch PPC

Hi everyone,
I just got into Arch and I realized there was a PPC port, so I decided to see if I could replace Ubuntu on my eMac (USB 2.0) with it. Unfortunately, I am unable to boot, getting stuck with the loading of the second-stage bootstrap. What should I be looking for in order to diagnose and conceivably remedy this issue?
I get the flashing folder with an alternating Mac face and question mark.
EDIT: Please see the link to the archlinuxppc-user mailing list for the resolution to my issue. I hope it helps someone else.
Last edited by bkadoctaj (2010-05-12 07:37:38)

Hi DaNiMoTh,
Thanks for the reply. Well, I have just made a post at the mailing list page, so hopefully it will be approved by the moderators soon. The situation has somewhat changed as I have attempted to reinstall Arch PPC on the eMac since then. Now I am immediately taken to the second-stage yaboot screen at boot and I have no access to OpenFirmware. When I use the Live CD to mount the / and /home partitions of /dev/hda, all I see in / is /home and /lost+found, while in /home all I see is /lost+found. It appears that Arch PPC never actually installed, and I have no idea why. I guess the files in /mnt were never copied to /. I'm so confused by all this, but I really desire to understand what is happening and how I can get this computer up and running. If you have any thoughts at all, please don't hesitate to share. I'm completely willing to do some reading, but I have not seen reports of a similar situation yet.
By the way, my eMac is 32-bit.
Thanks,
bkadoctaj
EDIT: I'm not sure how I can get a log for any of this, especially since it appears the install never completed, even though nothing during the install process suggested that was the case.
EDIT 2: Forget this thread... The discussion has been continued over at http://groups.google.com/group/archlinu … f4b89ad2ad
Thank you for the assistance.
Last edited by bkadoctaj (2010-05-11 21:45:57)

Arch PPC - Display not outputting anything

I've been working with an Apple G4, 1.4(?)Ghz PPC with one of the Apple Display Port monitors, and I've been trying to get arch on it using the install image from the Arch PPC site. So I finally got it to boot correctly, dear god that was more work than it should have been, and it loads the kernel, starts the daemons, but then, when the screen refreshes at the end, nothing. The display appears active, but there is no visible output. No login no nothing. I used the install disk to chroot into the root partition and installed some more packages including: dbus, hal, fam, abs, and openssh. So I added a user configured sshd and rebooted and I can shell into the machine fine. Everything appears to be there, I have no idea why it is doing this. I really have not had the time to do an extensive search in the system for possible errors, but does anyone have any ideas on what it could be and how to fix it?
Thanks

There is a mailing list for ppc problems on http://groups.google.it/group/archlinuxppc-user. The archppc devs follow it.

Arch PPC OpenOffice: Cannot find libicuuc.so.40

With a fresh installation of OpenOffice.org (package openoffice-base) on Arch PPC (using an aluminum PowerBook G4), I can't run OpenOffice. When I run "soffice" in a terminal, it throws the following error message:
/usr/lib/openoffice/program/soffice.bin: error while loading shared libraries: libicuuc.so.40: cannot open shared object file: No such file or directory
What does libicuuc.so.40 do, why isn't it there, and what can I do to fix it?

libicuuc.so.40 => libicu.
http://www.archlinuxppc.org/packages/4756/
Is it installed ? It has to be installed, because openoffice-base depends on it.

Trying to Install Arch PPC

Hi
I am trying to install Arch Linux PPC from the ISO on their site. I have run into a problem. When it comes to installing the packages I get and error about "key could not be looked up remotely" with different keys mentioned. I have tried changing the SigLevel to Never in /etc/pacman.conf but this seems to get over written when I start the package install form the installer (/arch/setup). How can I get round this?
Thanks
Robert

Hi
Thank you for the reply and information. I have gotten further. I am now stuck at installing the boot loader. I get an error that says:
Unable to find OpenFirmware path for boot=/dev/sda2
Please add ofboot=<path> where <path> is the OpenFirmware path to /dev/sda2 to /etc/yaboot.conf
So I have Googled and that ofpath should give me this information. But I then get this error when I run ofpath /dev/sdb2:
Unable to determind controller path!
Am I doing the right thing to find out the OpenFirmware path? Is there anything else I can try?
Thanks
Robert

Arch/PPC - how can we test...?

Hi all,
These last few months, I've been juggling with quite a few linux distro (Arch->Debian unstable->Fedora dev.->Ubuntu dev.->Arch and now I'm back on Arch linux and plan to stick with it!
However, I have an iBook and would like to test the PPC version of Arch that I heard was under development (ref. LinuxTag).
So, what is the best way to help testing on PPC...?
Thanks a lot!

i'm currently in a phase where i am not on the wired very often. we just recently moved to a new appartment so we dun have a connection at home yet.
this will end on the 10th of august - hopefully.
anyway, if i can be of hellp ask me when i'm around or bother cnuke on #archlinux-ppc
everything you prolly need is hosted on a server that i'd rather not make too public for misc. reasons. but if you ask me nicely i'll provide you with an iso you can boot from at least or a few lines on howto use other distro's bootcds to install arch. simply drop me a line at alexander -dot- baldeck (at) icomedias.com for now.
sorry for the trouble.

Pyqt3 request by weather-forecast of superkaramba (arch=ppc)

pyqt3 request by weather-forecast of superkaramba
for PPC
thanks

Hm, I've been doing some more work on AWeather lately... I don't think there are any Arch packages for it yet, and I don't use Arch myself, but if someone wants to volunteer to make one I might be able to help/answer questions.
The old wiki page was linked from above, the new development page is here: http://lug.rose-hulman.edu/code/projects/aweather
There's also IDV, which has quite a bit of support, but is a little tricky to get started with, and requires Java: http://www.unidata.ucar.edu/software/idv/

Silent ARCH process failure

Our production OLTP (10.1.0.3) has two archivelog destinations, one of which is on a remote physical standby. This afternoon as ARC1 was finishing writing a log to the standby destination, the standby server suffered a hardware emergency and rebooted itself.
When the standby came back I restarted replication and the archivelog it had started applying before the reboot continued, finished, and then logfile application stopped. Investigation showed that the primary had stopped shipping archivelogs over to the remote destination. In fact, all archival activity had stopped on the primary.
I was able to force log switches, and checkpoints were being reported in the alert log, but no archivelogs were being created. log_archive_min_succeed_dest is set to 1, so this behavior was blatantly illegal. Stranger yet, both ARC0 and ARC1 were still sitting in the process list. No errors or trace files were ever reported in the alert log. I added some redo logs as a temporary fix and to give the netops people time to bring the website down gracefully, and then I bounced the database.
The database hung while dismounting. I noticed ARC1 hanging out there in the process list so I killed it, after which the shutdown proceeded normally. Upon startup, the missing archivelogs were created during instance recovery and both ARCH processes resumed normal activities.
It's a little frightening that an essential service like ARCH could die without any errors being reported, and if I had not just happened to be poking around the redo logs could easily have filled up and brought the website to its knees. Has anyone else ever witnessed such bizarre behavior? My best guess is that the hardware event on the standby "did something" to ARC1 and shut it down, but I don't see how ARC0 could have been affected by that as well.

Since you can see the panel, the web client process is running on remote computer. The "X" and error message mean the communication between the web client and the server process has problem. This may be the networking problem, or the configuration problem.
Take a look at this KB. Do you get the same error message? Try to ping the server machine from the web client machine.
http://digital.ni.com/public.nsf/allkb/DFF87FABEE7393B586256945007961FA?OpenDocument
Also refer to this KB.
http://digital.ni.com/public.nsf/websearch/93D8E67CDB4F930686256F990067B3ED?OpenDocument
Is there a firewall on your computer?
By the way, you can develop both server process and client process on the same machine and test the communication. But you can't run the web client on the same machine, because Lookout webclient player can't be installed with Lookout dev/runtime server at the same time. So, the web client has to be running on remote machine.
The web server can be on the same machine with Lookout server.
Ryan Shi
National Instruments

Arch PPC issue with creating bootstrap partition

On second thought, I'm doing good.
Last edited by Kebertx (2012-01-13 22:35:32)

On second thought, I'm doing good.
EDIT: Didn't want to be a help vampire. Something I recently learned about, and felt bad to identify as.
So, in case anyone is trying to install Arch on a PowerMac G4, and messed up around the mac-fdisk step, I stumbled upon a thing that you shouldn't do.
After you hit i to initialize the partition map
DON'T hit p too early to print the table. You're supposed to enter the full block size. Doing this causes fdisk to believe you are setting up a 4 block partition. The bootstrap partition has to be 64 blocks, so that will just be completely non-working.
A very simple foolhardy mistake. Forgive me forum, I did not see. That little letter p in the wrong line... nightmarish, now that I look back on it.
The Wiki will lead you well until you get to the kernel.
# type name length base
( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1
( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap bootstrap 1600 @ 64
(800.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 root 31457280 @ 1664
( 15.0G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 3072000 @
31458944 ( 1.5G) Linux swap
/dev/hda5 Apple_UNIX_SVR2 home 121770544 @
34530944 ( 58.1G) Linux native
Block size=512, Number of Blocks=156301488
DeviceType=0x0, DeviceId=0x0
For the kernel the wiki is giving you something outdated. When you're installing the base, do this:
pacman -r /mnt -S base --ignore linux-pmac64 --ignore linux-pmac
And installing the kernel is like this:
pacman -r /mnt -S linux-pmac
pacman -r /mnt -S linux-pmac64
^If you are using x64.^
Am I a helpful community member now?

Ppc Arch (SOLVED)

When I try to download PPC-CD's from the ARCH-PPC site (Get Arch) I get this message:
"500 - Internal Server Error
Something has gone horribly wrong. Back away slowly."
What is going on?
Last edited by mianka (2008-03-26 09:42:08)

fixed, sorry for the inconvenience

BIND Failure due to ACL

Hey;
Ok i realise that it is a DNS issue however everything looks alright in server admin; does any one know what the specific issue is with this error and specific steps to fix?
Server Log below:
May 30 16:09:02 imac named[87612]: starting BIND 9.6.0-APPLE-P2 -f
May 30 16:09:02 imac named[87612]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' 'CFLAGS=-arch x86_64 -arch i386 -arch ppc -g -Os -pipe ' 'LDFLAGS=-arch x86_64 -arch i386 -arch ppc ' 'CXXFLAGS=-arch x86_64 -arch i386 -arch ppc -g -Os -pipe '
May 30 16:09:02 imac named[87612]: /etc/dns/publicView.conf.apple:1: undefined ACL 'mcdivine.com'
May 30 16:09:02 imac named[87612]: loading configuration: failure
May 30 16:09:02 imac named[87612]: exiting (due to fatal error)
May 30 16:09:02 imac com.apple.launchd[1] (org.isc.named[87612]): Exited with exit code: 1
May 30 16:09:02 imac com.apple.launchd[1] (org.isc.named): Throttling respawn: Will start in 10 seconds

Hello Raj,
Thanks once again for the answer.
I have a WebLogic Express 8.1 (A servlet conrainer only).
The webservices that I am developing doesn't use any of the EJB stuff, all they need is a servlet container and SOAP plumbing.
Since the webservices that I am trying to deploy are developed using the workshop 8.1, they have EJB stuff bundled with in them and I can't deploy them on a servlet conrainer.
Is there a way that I can create webservices using the workshop IDE but end up with no EJB dependencies in the application EAR.
I really appreciate your help.
Regards,
Kishore.

Restart problems

Hi
After a restart the Mac would not start, I got the bong but then only half of my USBs lit and the caps lock was lit and I only got a gray screen. I forced closed down and restarted but got he same, I did this once more but then had to unplug leave for half an hour then started the Mac again but had to do it once more before it started. I have noticed that I have only had this problem after updating to 10.5.8 When after updating it asked me to restart the same things happened, so it seems to be a problem with 10.5.8 or restarting.
Here is a log from the Console I hope it helps -
Sep 2 15:02:18 Macintosh [0x0-0x1d01d].com.apple.Safari[220]: Safari(220,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:02:18 Macintosh [0x0-0x1d01d].com.apple.Safari[220]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:02:19 Macintosh [0x0-0x1d01d].com.apple.Safari[220]: Safari(220,0xa090c820) malloc: * error for object 0x6d2e6373: Non-aligned pointer being freed
Sep 2 15:02:19 Macintosh [0x0-0x1d01d].com.apple.Safari[220]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:04:09 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:05:12 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:07:36 Macintosh Mail[210]: IPCClient: Server port 0 is invalid; looking it up again...
Sep 2 15:07:48 Macintosh LCCDaemon[196]: Opening LCC Update in automatic mode
Sep 2 15:09:38 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:10:52 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:12:09 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:12:51 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:12:54 Macintosh osascript[233]: osascript(233) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 15:12:54 Macintosh [0x0-0x15015].com.skype.skype[195]: osascript(233) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:12:54 Macintosh [0x0-0x15015].com.skype.skype[195]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:12:54 Macintosh osascript[233]: osascript(233,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 15:12:54 Macintosh [0x0-0x15015].com.skype.skype[195]: osascript(233,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:12:54 Macintosh [0x0-0x15015].com.skype.skype[195]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:14:56 Macintosh Skype[195]: SkypeEventNotificator::playSound: ERROR: cannot load sound Busy
Sep 2 15:18:12 Macintosh [0x0-0x1d01d].com.apple.Safari[220]: Debugger() was called!
Sep 2 15:20:04 Macintosh System Preferences[237]: System Preferences(237,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 15:20:04: --- last message repeated 1 time ---
Sep 2 15:20:04 Macintosh [0x0-0x22022].com.apple.systempreferences[237]: System Preferences(237,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:20:04 Macintosh [0x0-0x22022].com.apple.systempreferences[237]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:20:04 Macintosh [0x0-0x22022].com.apple.systempreferences[237]: System Preferences(237,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:20:04 Macintosh [0x0-0x22022].com.apple.systempreferences[237]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:20:59 Macintosh SCHelper[242]: no command
Sep 2 15:20:59 Macintosh com.apple.launchd[91] ([0x0-0x22022].com.apple.systempreferences[237]): Stray process with PGID equal to this dead job: PID 242 PPID 1 SCHelper
Sep 2 15:21:57 Macintosh System Preferences[249]: System Preferences(249,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 15:21:57: --- last message repeated 1 time ---
Sep 2 15:21:57 Macintosh [0x0-0x24024].com.apple.systempreferences[249]: System Preferences(249,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:21:57 Macintosh [0x0-0x24024].com.apple.systempreferences[249]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:21:57 Macintosh [0x0-0x24024].com.apple.systempreferences[249]: System Preferences(249,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 15:21:57 Macintosh [0x0-0x24024].com.apple.systempreferences[249]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 15:22:58 Macintosh SCHelper[254]: no command
Sep 2 15:22:58 Macintosh com.apple.launchd[91] ([0x0-0x24024].com.apple.systempreferences[249]): Stray process with PGID equal to this dead job: PID 254 PPID 1 SCHelper
Sep 2 15:32:35 Macintosh AppleSpell[261]: exception: * -[NSCFString rangeOfCharacterFromSet:options:range:]: Range or index out of bounds
Sep 2 15:35:28 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 15:36:40 Macintosh loginwindow[27]: DEAD_PROCESS: 0 console
Sep 2 15:36:41 Macintosh shutdown[270]: reboot by georgehilton:
Sep 2 15:36:41 Macintosh shutdown[270]: SHUTDOWN_TIME: 1251898601 222521
Sep 2 15:36:41 Macintosh com.apple.loginwindow[27]: Shutdown NOW!
Sep 2 15:36:41 Macintosh mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:52)[26]: stopping
Sep 2 15:36:41 Macintosh com.apple.loginwindow[27]: System shutdown time has arrived^G^G
Sep 2 15:36:41 Macintosh com.apple.SystemStarter[20]: Stopping XtraView USB Startup
Sep 2 16:29:33 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
Sep 2 16:29:31 localhost com.apple.launchctl.System[2]: /dev/disk0s3 on / (hfs, local, journaled)
Sep 2 16:29:32 localhost com.apple.launchctl.System[2]: launchctl: Dubious permissions on file (skipping): /System/Library/LaunchDaemons/org.x.font_cache.plist
Sep 2 16:29:32 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Sep 2 16:29:32 localhost com.apple.launchd[1] (com.symantec.Sched501-4.plist): Unknown key: SchedName
Sep 2 16:29:32 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Sep 2 16:29:32 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Sep 2 16:29:32 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Sep 2 16:29:32 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Sep 2 16:29:32 localhost com.apple.launchd[1] (org.postfix.master): Path monitoring failed on "/var/spool/postfix": No such file or directory
Sep 2 16:29:33 localhost kextd[12]: 434 cached, 0 uncached personalities to catalog
Sep 2 16:29:34 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 2 16:29:34 localhost kernel[0]: vmpagebootstrap: 761791 free pages and 24641 wired pages
Sep 2 16:29:34 localhost kernel[0]: migtable_maxdispl = 79
Sep 2 16:29:34 localhost kernel[0]: 120 prelinked modules
Sep 2 16:29:34 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Sep 2 16:29:34 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Sep 2 16:29:34 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Sep 2 16:29:34 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Sep 2 16:29:34 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Sep 2 16:29:34 localhost kernel[0]: calling mpopolicyinit for mb
Sep 2 16:29:34 localhost kernel[0]: Seatbelt MACF policy initialized
Sep 2 16:29:34 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Sep 2 16:29:34 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 2 16:29:34 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 2 16:29:34 localhost kernel[0]: MAC Framework successfully initialized
Sep 2 16:29:34 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Sep 2 16:29:34 localhost kernel[0]: DART enabled
Sep 2 16:29:34 localhost kernel[0]: FireWire (OHCI) Apple ID 42 PCI now active, GUID 000d93fffe6ebdd0; max speed s800.
Sep 2 16:29:34 localhost kernel[0]: mbinit: done
Sep 2 16:29:34 localhost kernel[0]: Security auditing service present
Sep 2 16:29:34 localhost kernel[0]: BSM auditing present
Sep 2 16:29:34 localhost kernel[0]: rooting via boot-uuid from /chosen: 2CC45692-EFB7-3616-BDAD-BA3ED0463BA8
Sep 2 16:29:34 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 2 16:29:34 localhost kernel[0]: Could not enable ARP cache poisoning detection. Your computer will not be protected.
Sep 2 16:29:34 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@7/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/AppleATADiskDriver /IOATABlockStorageDevice/IOBlockStorageDriver/Maxtor 6Y160M0 Maxtor 6Y160M0/IOApplePartitionScheme/AppleHFS_Untitled1@3
Sep 2 16:29:34 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Sep 2 16:29:34 localhost kernel[0]: Jettisoning kernel linker.
Sep 2 16:29:34 localhost kernel[0]: Resetting IOCatalogue.
Sep 2 16:29:34 localhost kernel[0]: Matching service count = 0
Sep 2 16:29:34 localhost kernel[0]: Matching service count = 6
Sep 2 16:29:34: --- last message repeated 4 times ---
Sep 2 16:29:34 localhost kernel[0]: Matching service count = 7
Sep 2 16:29:34 localhost kernel[0]: PowerMac7,3: stalling for module
Sep 2 16:29:34 localhost kernel[0]: PowerMac72U3TwinsPIDCtrlLoop::adjustControls state == not ready
Sep 2 16:29:35 localhost kernel[0]: Matching service count = 1
Sep 2 16:29:35 localhost kernel[0]: PowerMac7,3 Thermal Manager: Thermal Runaway Detected: System Will Sleep
Sep 2 16:29:35 localhost kernel[0]: PM73 T_cur=109 >= (T_max:83 + sleepOffset:20)
Sep 2 16:29:35 localhost kernel[0]: PowerMac72PlatformPlugin core dump:
Sep 2 16:29:35 localhost kernel[0]: IOHWControls:
Sep 2 16:29:35 localhost kernel[0]: [0] "PWR SUPPLY" Type:"fan-pwm" Id:8960 TGT:16 CUR:42
Sep 2 16:29:35 localhost kernel[0]: [1] "CPU A ACS" Type:"fan-rpm" Id:16384 TGT:1000 CUR:0
Sep 2 16:29:35 localhost kernel[0]: [2] "CPU B ACS" Type:"fan-rpm" Id:16640 TGT:1000 CUR:1002
Sep 2 16:29:35 localhost kernel[0]: [3] "CPU A Intake Fan" Type:"fan-rpm" Id:17152 TGT:1000 CUR:995
Sep 2 16:29:35 localhost kernel[0]: [4] "CPU A Exhaust Fan" Type:"fan-rpm" Id:17408 TGT:1000 CUR:998
Sep 2 16:29:35 localhost kernel[0]: [5] "CPU B Intake Fan" Type:"fan-rpm" Id:17664 TGT:1000 CUR:999
Sep 2 16:29:35 localhost kernel[0]: IOHWSensors:
Sep 2 16:29:35 localhost kernel[0]: [0] "CPU A POWER" Type:"power" Id:48 CUR:90.47365 W
Sep 2 16:29:35 localhost kernel[0]: [1] "CPU B POWER" Type:"power" Id:49 CUR:76.35553 W
Sep 2 16:29:35 localhost kernel[0]: [2] "CPU B AD7417 AD4" Type:"current" Id:19 CUR:55.51520 A
Sep 2 16:29:35 localhost kernel[0]: [3] "CPU A AD7417 AD4" Type:"current" Id:14 CUR:65.20160 A
Sep 2 16:29:35 localhost kernel[0]: [4] "BACKSIDE" Type:"temperature" Id:6 CUR:36.49152 C
Sep 2 16:29:35 localhost kernel[0]: [5] "U3 HEATSINK" Type:"temperature" Id:7 CUR:53.57344 C
Sep 2 16:29:35 localhost kernel[0]: [6] "CPU A AD7417 AD2" Type:"current" Id:12 CUR:8.51712 A
Sep 2 16:29:35 localhost kernel[0]: [7] "CPU A AD7417 AD3" Type:"voltage" Id:13 CUR:1.25504 V
Sep 2 16:29:35 localhost kernel[0]: [8] "CPU B AD7417 AD2" Type:"current" Id:17 CUR:7.28448 A
Sep 2 16:29:35 localhost kernel[0]: [9] "CPU B AD7417 AD3" Type:"voltage" Id:18 CUR:1.24384 V
Sep 2 16:29:35 localhost kernel[0]: [10] "CPU A AD7417 AD1" Type:"temperature" Id:11 CUR:109.27266 C
Sep 2 16:29:35 localhost kernel[0]: [11] "CPU B AD7417 AD1" Type:"temperature" Id:16 CUR:77.19857 C
Sep 2 16:29:35 localhost kernel[0]: [12] "CPU A AD7417 AMB" Type:"temperature" Id:10 CUR:42.0 C
Sep 2 16:29:35 localhost kernel[0]: [13] "CPU B AD7417 AMB" Type:"temperature" Id:15 CUR:39.32768 C
Sep 2 16:29:35 localhost kernel[0]: IOHWCtrlLoops:
Sep 2 16:29:35 localhost kernel[0]: [0] "U3/Backside Fan" Id:7 MetaState:0 "Normal"
Sep 2 16:29:35 localhost kernel[0]: [1] "CPU Cooling" Id:6 MetaState:0
Sep 2 16:29:35 localhost kernel[0]: [2] "Clock Slew" Id:0 MetaState:0 "Dynamic Power Step"
Sep 2 16:29:35 localhost kernel[0]: [3] "Drive Bay Fan" Id:1 MetaState:0 "Normal"
Sep 2 16:29:35 localhost kernel[0]: [4] "PCI Slot Fan" Id:5 MetaState:0 "Normal"
Sep 2 16:29:35 localhost kernel[0]: ---------------------------------
Sep 2 16:29:35 localhost kernel[0]: PowerMac72U3TwinsPIDCtrlLoop::adjustControls state == not ready
Sep 2 16:29:35 localhost kernel[0]: IOPlatformControl::registerDriver Control Driver AppleSlewClock did not supply target-value, using default
Sep 2 16:29:37 localhost com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 2 16:29:37: --- last message repeated 1 time ---
Sep 2 16:29:37 localhost bootlog[40]: BOOT_TIME: 1251901769 0
Sep 2 16:29:37 localhost rpc.statd[22]: statd.notify - no notifications needed
Sep 2 16:29:38 localhost fseventsd[31]: bumping event counter to: 0x194a82c (current 0x0) from log file '0000000001941845'
Sep 2 16:29:38 localhost kernel[0]: UniNEnet: Ethernet address 00:0d:93:6e:bd:d0
Sep 2 16:29:38 localhost DirectoryService[36]: Launched version 5.7 (v514.25)
Sep 2 16:29:38 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Sep 2 16:29:38 localhost /Library/Smith Micro/Common/schedulerdaemon[49]: SmithMicro schedulerdaemon started.
Sep 2 16:29:38 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started -- Threaded auth
Sep 2 16:29:39 localhost SymSharedSettingsd[56]: Settings server starting up.
Sep 2 16:29:39 localhost com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 2 16:29:39: --- last message repeated 7 times ---
Sep 2 16:29:39 localhost com.symantec.navapdaemon[46]: kextunload: unload kext /Library/Application Support/Symantec/AntiVirus/NortonAutoProtect.bundle/Contents/Resources/SymAPCom m.kext failed
Sep 2 16:29:40 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:52)[26]: starting
Sep 2 16:29:40 localhost com.apple.usbmuxd[18]: usbmuxd-167.1 built for iTunesEightTwo on Jul 9 2009 at 14:02:00, running 32 bit
Sep 2 16:29:40 localhost com.symantec.navapdaemon[46]: kextload: /Library/Application Support/Symantec/AntiVirus/NortonAutoProtect.bundle/Contents/Resources/SymAPCom m.kext loaded successfully
Sep 2 16:29:40 localhost /usr/sbin/ocspd[86]: starting
Sep 2 16:29:41 localhost com.apple.IFCStart[29]: ifcstart(29,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:29:41 localhost ifcstart[29]: ifcstart(29,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:29:41 localhost com.apple.IFCStart[29]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:29:42 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex (PHY regs 5,6:0x45e1,0x0005)
Sep 2 16:29:46 Macintosh configd[38]: setting hostname to "Macintosh.local"
Sep 2 16:29:47 Macintosh com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 2 16:29:51 Macintosh kextd[12]: writing kernel link data to /var/run/mach.sym
Sep 2 16:29:54 Macintosh com.apple.SystemStarter[20]: Starting XtraView USB Startup
Sep 2 16:29:54 Macintosh com.apple.SystemStarter[20]: -s XtraView USB Startup
Sep 2 16:29:58 Macintosh kernel[0]: 2.1.08 Little Snitch: connection deferred for:/usr/sbin/ntpd uid:0 to:17.72.255.11 :2000
Sep 2 16:30:01 Macintosh loginwindow[27]: Login Window Started Security Agent
Sep 2 16:30:06 Macintosh com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 2 16:30:22: --- last message repeated 23 times ---
Sep 2 16:30:22 Macintosh authorizationhost[114]: MechanismInvoke 0x12a230 retainCount 2
Sep 2 16:30:22 Macintosh SecurityAgent[115]: MechanismInvoke 0x134b40 retainCount 1
Sep 2 16:30:22 Macintosh SecurityAgent[115]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Sep 2 16:30:22 Macintosh SecurityAgent[115]: NSExceptionHandler has recorded the following exception:\nNSRangeException -- * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)\nStack trace: 0x39dbc 0x950094ec 0x94ec0c00 0x94ec0c38 0x9036e180 0x989c8 0x83ee4 0x96dd8 0x8b7b4 0x90368 0x9f4a4 0xe068 0x14200 0x13f64 0xdb58 0x903a58f0 0x94e3126c 0x94e53634 0x909bfb18 0x909bf93c 0x909bf77c 0x93701248 0x93700c00 0x936fa8a0 0x11e14 0x2db0
Sep 2 16:30:23 Macintosh loginwindow[27]: Login Window - Returned from Security Agent
Sep 2 16:30:23 Macintosh SecurityAgent[115]: MechanismDestroy 0x134b40 retainCount 1
Sep 2 16:30:23 Macintosh authorizationhost[114]: MechanismDestroy 0x12a230 retainCount 2
Sep 2 16:30:23 Macintosh loginwindow[27]: USER_PROCESS: 27 console
Sep 2 16:30:23 Macintosh loginwindow[27]: ERROR | -[Login1 setupEnvironment] | Unable to unlock the keychain, SecKeychainLogin returned -2147413984
Sep 2 16:30:23 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[111]): Exited: Terminated
Sep 2 16:30:23 Macintosh com.apple.launchd[91] (com.smithmicro.cleaning.schedulermailer): Ignored this key: UserName
Sep 2 16:30:23 Macintosh com.apple.launchd[91] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Sep 2 16:30:23 Macintosh com.apple.launchd[91] (org.x.startx): Unknown key for boolean: EnableTransactions
Sep 2 16:30:24 Macintosh com.apple.loginwindow[27]: loginwindow(27,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:24 Macintosh loginwindow[27]: loginwindow(27,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:24 Macintosh com.apple.loginwindow[27]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:24 Macintosh /Library/Smith Micro/Common/schedulermailer[148]: SchedulerMailerController: started.
Sep 2 16:30:25 Macintosh Dock[160]: _DESCRegisterDockExtraClient failed 268435459
Sep 2 16:30:25 Macintosh /System/Library/CoreServices/coreservicesd[57]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(George Hilton's Public Folder) returned -14135
Sep 2 16:30:26 Macintosh com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 2 16:30:27: --- last message repeated 15 times ---
Sep 2 16:30:27 Macintosh coreaudiod[164]: coreaudiod(164) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:27 Macintosh com.apple.audio.coreaudiod[164]: coreaudiod(164) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:27 Macintosh com.apple.audio.coreaudiod[164]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh SystemUIServer[165]: \n MenuCracker\n see http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
Sep 2 16:30:29 Macintosh Finder[167]: Finder(167,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh [0x0-0x10010].com.apple.finder[167]: Finder(167,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:29 Macintosh [0x0-0x10010].com.apple.finder[167]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh SystemUIServer[165]: failed to load Menu Extra: NSBundle </Users/georgehilton/Library/Application Support/iStat menus/Extras/MenuCracker.menu> (loaded)
Sep 2 16:30:29 Macintosh Finder[167]: Finder(167,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh [0x0-0x10010].com.apple.finder[167]: Finder(167,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:29 Macintosh [0x0-0x10010].com.apple.finder[167]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh SystemUIServer[165]: SystemUIServer(165,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh [0x0-0xf00f].com.apple.systemuiserver[165]: SystemUIServer(165,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:29 Macintosh [0x0-0xf00f].com.apple.systemuiserver[165]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh SystemUIServer[165]: SystemUIServer(165,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh LCCDaemon[196]: LCCDaemon(196,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh [0x0-0xf00f].com.apple.systemuiserver[165]: SystemUIServer(165,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:29 Macintosh [0x0-0xf00f].com.apple.systemuiserver[165]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:29 Macintosh [0x0-0x16016].com.Logitech.Control Center.Daemon[196]: LCCDaemon(196,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:29 Macintosh [0x0-0x16016].com.Logitech.Control Center.Daemon[196]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:30 Macintosh LCCDaemon[196]: LCCDaemon(196,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:30 Macintosh SystemUIServer[165]: MenuCracker: Loading 'iStatMenusMemory'.
Sep 2 16:30:30 Macintosh [0x0-0x16016].com.Logitech.Control Center.Daemon[196]: LCCDaemon(196,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:30 Macintosh [0x0-0x16016].com.Logitech.Control Center.Daemon[196]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:30 Macintosh /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 65]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:30 Macintosh /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 65]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:30 Macintosh SystemUIServer[165]: MenuCracker: Loading 'iStatMenusCPU'.
Sep 2 16:30:30 Macintosh SystemUIServer[165]: MenuCracker: Loading 'iStatMenusNetwork'.
Sep 2 16:30:33 Macintosh [0x0-0x15015].com.skype.skype[195]: Main starting with pid 195 parent pid 91
Sep 2 16:30:36 Macintosh Skype[195]: SkypeApplication::init called
Sep 2 16:30:36 Macintosh Skype[195]: Skype(195,0xa090c820) malloc: * error for object 0xa1b1c1d3: pointer being freed was not allocated
Sep 2 16:30:37: --- last message repeated 1 time ---
Sep 2 16:30:36 Macintosh [0x0-0x15015].com.skype.skype[195]: Skype(195,0xa090c820) malloc: * error for object 0xa1b1c1d3: pointer being freed was not allocated
Sep 2 16:30:38: --- last message repeated 1 time ---
Sep 2 16:30:38 Macintosh /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[167]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:38 Macintosh /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[167]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:39 Macintosh SecurityAgent[202]: SecurityAgent(202,0xa090c820) malloc: * error for object 0xffffffff: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:42 Macintosh /Applications/Skype.app/Contents/MacOS/Skype[195]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:42 Macintosh /Applications/Skype.app/Contents/MacOS/Skype[195]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Sep 2 16:30:43 Macintosh Skype[195]: CFDictionaryReplaceValue(): immutable collection 0x5ccaa80 given to mutating function
Sep 2 16:30:50 Macintosh Skype[195]: ERROR: MacChatMessage wrapper could not GetChatMessage C++ __SkyLibChatMessage by object ID
Sep 2 16:30:52: --- last message repeated 1 time ---
Sep 2 16:30:52 Macintosh GrowlHelperApp[205]: WARNING: could not register Growl server.
Sep 2 16:30:53 Macintosh UserNotificationCenter[206]: UserNotificationCenter(206,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:53 Macintosh com.apple.UserNotificationCenter[206]: UserNotificationCenter(206,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:30:53 Macintosh com.apple.UserNotificationCenter[206]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:30:57 Macintosh /Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/NortonMissedTasks[47 ]: uid 501 already done
Sep 2 16:31:00 Macintosh quicklookd[181]: quicklookd(181,0xa090c820) malloc: * error for object 0xa1b1c1d3: pointer being freed was not allocated
Sep 2 16:31:01: --- last message repeated 1 time ---
Sep 2 16:31:00 Macintosh com.apple.quicklook[181]: quicklookd(181,0xa090c820) malloc: * error for object 0xa1b1c1d3: pointer being freed was not allocated
Sep 2 16:31:31: --- last message repeated 1 time ---
Sep 2 16:34:46 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 16:37:29 Macintosh login[224]: USER_PROCESS: 224 ttys000
Sep 2 16:37:29 Macintosh Terminal[223]: Terminal(223,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed\n* set a breakpoint in mallocerrorbreak to debug
Sep 2 16:37:29: --- last message repeated 1 time ---
Sep 2 16:37:29 Macintosh [0x0-0x1f01f].com.apple.Terminal[223]: Terminal(223,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:37:29 Macintosh [0x0-0x1f01f].com.apple.Terminal[223]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:37:29 Macintosh [0x0-0x1f01f].com.apple.Terminal[223]: Terminal(223,0xa090c820) malloc: * error for object 0xa1b1c1d3: Non-aligned pointer being freed
Sep 2 16:37:29 Macintosh [0x0-0x1f01f].com.apple.Terminal[223]: * set a breakpoint in mallocerrorbreak to debug
Sep 2 16:37:34 Macintosh login[224]: DEAD_PROCESS: 224 ttys000
Sep 2 16:38:14 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Sep 2 16:39:17 Macintosh kernel[0]: { 41 910440} UniNEnet::restartReceiver
Thanks for any help
George

Hi Tranchedevie
First thanks for your help, below is a small part of the system log from before I tried to shut down to when I restarted the next day, I hope it gives you some clue as to what is wrong.
Sep 15 19:25:42 Macintosh kernel[0]: Resetting IOCatalogue.
Sep 15 19:25:42 Macintosh kextd[12]: 0 cached, 434 uncached personalities to catalog
Sep 15 19:25:45 Macintosh kernel[0]: Matching service count = 1
Sep 15 19:25:45 Macintosh kernel[0]: PowerMac7,3: stalling for module
Sep 15 19:25:45 Macintosh kernel[0]: Matching service count = 1
Sep 15 19:26:03 Macintosh com.apple.dyld[5709]: updatedyld_sharedcache[5709] regenerated cache for arch=ppc
Sep 15 19:26:11 Macintosh 1PasswordAgent[141]: Shutting down 1PasswordAgent 2.9.31 #7574 built Aug 30 2009 15:23:28
Sep 15 19:26:15 Macintosh loginwindow[32]: DEAD_PROCESS: 0 console
Sep 15 19:26:16 Macintosh com.apple.loginwindow[32]: shutdown: / is busy updating; waiting for lock
Sep 15 19:26:16 Macintosh kextd[12]: '/' updating, delaying reboot
Sep 15 19:26:16 Macintosh com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
Sep 15 19:26:22: --- last message repeated 1 time ---
Sep 15 19:26:22 Macintosh shutdown[5722]: reboot by georgehilton:
Sep 15 19:26:22 Macintosh com.apple.loginwindow[32]: Shutdown NOW!
Sep 15 19:26:22 Macintosh mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:52)[31]: stopping
Sep 15 19:26:22 Macintosh com.apple.loginwindow[32]: System shutdown time has arrived^G^G
Sep 15 19:26:22 Macintosh shutdown[5722]: SHUTDOWN_TIME: 1253035582 188995
Sep 15 19:26:22 Macintosh com.apple.SystemStarter[25]: Stopping XtraView USB Startup
Sep 16 08:49:59 localhost com.apple.launchctl.System[2]: /dev/disk0s3 on / (hfs, local, journaled)

Imac G4 install boot issue: Blank screen

Hi!
I'm trying t get archppc on an old g4 with 512 ram (the infamous iLamp). I get the cd to boot part way, but then I get a blank screen, and the computer doesn't move forward. I tried using the option that does something to the video (sorry, I forgot what it was called. I'll try getting it in a few minutes), but it did the same thing. I'm using xubuntu right now, but it's like puling a trailer with a coupe. I want just what I need: openbox, internet, terminal. So anything else is quite useless.
Thanks a lot!

Hi! I may come too late!
I installed Arch ppc on a Mac mini G4 a few months ago.
After udev was parsing the hooks, had a ' black screen flash' then 'nothing' (reading my notes, I can't remember if it was a white screen, but I had that one when trying to install other systems like Debian or Crux on ppc machines when it was about communicating with GPU).
On Arch ppc, the way through the problem was to reboot from the install cd, chrooting again, and edit yaboot.conf adding these two lines after the proper boot image :
append="video=radeonfb"
append="radeon.agpmode=-1"
Your GPU is most probably an ATI and should be ok with that, but check anyway.
And don't forget to
ybin -v
again before rebooting!
Hope this helps someone, if not the OP.

[archppc] How stable is it ?

I have a MacMini (G4 processor) currently running Debian. I use it as a home server (http, ftp, svn). The thing is... I can't stand Debian anymore. I really love Arch but I don't know if the ppc version is stable enough to be installed on a little server, and I can't find linux ppc equivalents to arch.
So, what do you think ? Should I go for ArchPPC or should I really avoid it ? If so, what distro do you recommand ?

Ok, here's my installation report
I used Installation on newworld machines document. Evrything went great before this part :
4) Create a chrooted archlinuxppc
- Mount chroot
mount -t proc none /mnt/proc
mount -t sysfs none /mnt/sys
mount /mnt /bin/bash
source /etc/profile
udevstart
The line mount /mnt /bin/bash should be chroot /mnt /bin/bach. Then udevstart doesn't exists anymore, it's /etc/start_udev
The problem is : I can't start udev unless the kernel is installed. So I jumped to the next step :
5) Edit configuration files
file /etc/fstab; /etc/rc.conf, /etc/yaboot.conf, /etc/hosts
You should add file /etc/resolv.conf else pacman runs in trouble when trying to download packages (can't resolve host).
I stopped to this step because I'm lost :
6) Install kernel & openssh
pacman -Sy kernel26-pmac openssh
Pacman works, except that it can't generate initrd image :
[root@arch-ppc /]# mkinitrd auto
Checking Input...
Making image for standard Arch kernel (2.6.16-ARCH)...
Setting up Parameters...
/lib/modules/2.6.16-ARCH found
ERROR: All of your loopback devices are in use!
If you any idea of what I could do to fix it, I would be pleased to try it.
Thanks in advance !

Arch PPC failure on yaboot

Similar Messages

Maybe you are looking for