Arch sound problem on hp dv7 1299

Hi!
Yesterday I've istalled arch linux on my hp laptop. Earlier I've used debian. I copied my sound configs from debian to /etc/modprobe.d/sound.conf but they didn't work. I have also used alsaconf..
configs:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel enable_msi=1 model=hp-m4 OR hp-dv5
I have already tried different sound.conf configurations but they didn't work. Any suggestions?
Thanks for help

I also had similar problems in the beginning. What you need to run is 'alsaconf' as root when the sound is not there and then readjust the volume in 'alsamixer' as user. When the later part is done, it seems like there is no sound in my own experience.
And sound frequently disappears from my laptop (hp zv6000) without any reason. I rerun 'alsaconf' and 'alsamixer' to get it back. Maybe this helps!

Similar Messages

AS5920G sound problem ....

With my sound card, the sound is too low and microphones do not work.
[ubermensch@arch-tux ~]$ sudo lspci -d 8086:284b -vv
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Aspire 5920G
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f3500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf3500000 irq 22
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.
[ubermensch@arch-tux ~]$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf3500000 irq 22
[ubermensch@arch-tux ~]$ cat /proc/asound/modules
0 snd_hda_intel
[ubermensch@arch-tux ~]$ cat /etc/modprobe.d/50-sound.conf
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=auto probe_mask=1
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ aplay -L
default:CARD=Intel
HDA Intel, ALC1200 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
[ubermensch@arch-tux ~]$
:cool:

What type of sound problem are you having- low sound, static, no sound at all,etc?
Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.Post it.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

No sound - no beats audio. dv7 notebook Windows 7 64 bit.

No sound - no beats audio. dv7 notebook PC-SER #2CE2012FSD, IDT High DEF Audio CODEC, Windows 7 64 bit, Product # A6X08UA#ABA. Need ASAP for school.Please help.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58226.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Skype problem on Pavilion DV7 Vista & Win7

I'm having problems with Skype 5.1 - when I try to open it a message appears 'Skype has stopped working, check online for a solution & close the program etc'. Nothing appears when this is clicked. I tried scanning for viruses & updating drivers with no success. My DV7 originally ran Vista so I decided to do a fresh install of Windows 7. To my surprise the problem with Skype persisted, so I can only assume it's hardware related. I updated the Bios without success.
I've found a partial solution - start Skype in Win 98/ME compatability mode. Skype opens but the quality of the video & audio is poor. I have Skype installed on 2 desktops with Vista & Win 7 & it works perfectly, so the fault must lie with my HP Notebook. Any help would be appreciated.
Update: if I disable the IDT Audio Device Codec drivers Skype video works well (in Win98/ME compatability mode) without sound. This suggests the audio drivers are causing the problem - there are several posts on this topic. I tried installing an older driver (6.10.6225.0 instead of 6.10 6276.0) but the program still freezes after a few minutes on a call with CPU usage at 85-90%. My machine is the DV7-2030ea with a 2.2 GHz AMD Turion processor, 3GB RAM, ATI Mobility Radeon HD 4500/5100 Graphics & AMD HD Audio. Anyone else had this problem?
This question was solved.
View Solution.

Tried Skype 5.2 - reluctant to install & outgoing video would not work. Decided to go back to 3.6 (360216). Only works in Win 98/Me compatability mode, but no problems with freezing etc even after 30 mins. To anyone having the above problems with the DV7-2030ea or similar spec machine I would suggest:
1) Use Skype 3.6 rather than latest version.
2) Run in Win98/Me compatability mode.
3) Replace IDT HD Audio Codec drivers with Microsoft ones if problems persist.

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
I thought that was odd...but then the problems really started.....
After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
(and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

HT3983 i have a sound problem when i install windows 7 32 bit on my imac

i have a sound problem when i install windows 7 32 bit on my imac

Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
Hope it helps.
Regards,
Waseem,
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Any resolution to the sound problem?

I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it. I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix. The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers. I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
Is there anybody else out there with this problem, and has been able to resolve it?
Thank you.

I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem. I don't recall any problems setting it up. But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to). Not sure why the preference wouldn't stick. And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

Please help iPhone 5 sound problems

iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Sound Problems on iPad: how to fix, easy [video]

Hi dear iPad user,
Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
So I made a video (short: 1m40s):
https://www.youtube.com/watch?v=FjBP-Ncj_fE
It shows:
how to unmute the sound (even if the side-switch locks the rotation of the screen)
how to put volume up
how to close all the apps (in the case there is an App messing with the sound system)
how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
What it won't fix: if you have a hardware problem...
If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
Hope this helps!
Everson.

UPDATE: fixing iPad Sound after iOS 7
http://youtu.be/SDf1LDcE95Q
(1min 36sec)
It covers the basics:
checking side-switch / mute / "Control Center"
volume all up
...and also the worst cases:
closing all apps (for rare cases when a single app might render the sound system instable)
rebooting the iPad
So, don't get desparete: try the things in the video.
There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

Please Help - sound problem

After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
Any Ideas????
[Edited by: admin on 02-Apr-05 15:40]

Hi Nick,
Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
2. Check Software. This is where the fun begins.
2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
HTH

USB Sound Problem

I'm having a problem with my Bose USB sound system that has just recently developed. The system is plugged directly into the back of my Mac Pro desktop so it's not going through any hubs or secondary systems. When I first start my computer the sound works just fine. But after about 10 to 15 minutes of use the sound stops completely - as if the sounds have been turned off. If I boot into Windows 7 using Boot Camp, the sound system there works just fine with no problems at all, so I do not believe this issue is hardware related but is something associated with OS X.
This all started recently after installing Tinker Tool and then realizing that their latest version is not compatible with Snow Leopard. I followed their directions and told Tinker Tool to restore the previous settings and then I removed it from my system. Now, I'm having this USB sound problem. I think it's highly probable to be the cause of my problem.
Is there anyway to reinstall the USB drivers in OS X without reinstalling the entire OS? Or, is there something else I can try to restore the USB function to Snow Leopard? Many thanks for any tips or suggestions.

They are plug and play.
I did try unplugging all of the USB devices and then powered off the computer and unplugged it for about 5 minutes as I heard that that sometimes solves USB problems. However, upon reconnecting the problem returned. All other USB devices seem to be working normally - it's only the Bose sound system. I tried plugging it into a different USB port in the back of the computer but the problem continued after about 10 minutes. Therefore, I am convinced this is not hardware related.
At this point I am thinking I need to reinstall OS X Snow Leopard to undo whatever Tinker Tool damaged. Is it possible to just replace the USB drivers in OS X without reinstalling everything?

A30 sound problem

have tried all drivers from toshiba web sites, uk, canada, europe etc but cannot get sound to work on my satellite a30, model no PSA33E 7C3F3 EN, fresh install of xp had 4 drivers missing, ati video, smbus, modem and sound, only drivers from canada site worked for video smbus and modem, xp states sound working properly but no sound from speakers or headphone socket and have checked all volume levels (on full nothing muted), any ideas ???

Hi,
Just to inform you that my problem was solved by itself :)
I've reformatted my laptop and installed the original XP Pro SP2 again by following the instructions.
Sound problem was solved automatically, no chipset utility installation required..
The sound problem was probably caused due to missing Microsoft KB835221 update for SP1, and KB888111 for SP2, which then was solved with the original latest XP..
Rgrds..

Arch sound problem on hp dv7 1299

Similar Messages

Maybe you are looking for