Arch Still Dead, can't get it to work!!!

K. So I updated my kernel and forgot to run Lilo.
When I boot from the FTP/base CD, I type:
arch root=/dev/discs/disc0/part3
But then I cannot run lilo!! It can't find it! And the root is the CD, not my drive.
WHAT DO I DO?!?! THIS IS DRIVING ME NUTS!!!

I immediately ran:
vmlinuz root=/dev/discs/disc0/part3
And that worked. The advice in the other thread was incorrect.
Thanks!

Similar Messages

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Can't get cnet to work anymore. Have uninstalled and reinstalled and it still doesn't work. Any suggestions?

Can't get cnet+ to work. Have uninstalled and then re installed and it still opens and then closes . Any suggestions ?

Your serial number is available form the Adobe website. Sign into your Adobe Account on the Adobe website and click on the My Adobe link at the top of the page. It will take you to a page to find ALL of your serial numbers for products you have registered.

Still can't get airplay to work!!!!!

Grrrrrrrrr. Still can't get airplay to work with either my iPad or my iPhone to my atv2. Everything has the latest firmware, including my airport extreme. Airplay is turned on in options on the atv2.
Everything is on the same network. I even switched networks but still nothing.
I do not see the blue icon that let's me stream to the tv.
What the heck am I doing wrong?

Hi,
Your profile indicates you are running v10.5.7. If that's the case, you need to update your system software to v10.5.8 which is the minimum requirement for the iPad.
Click the Apple () menu then click: Software Update...
And make sure Bluetooth is not enabled on either the iPad or the iPhone. Tapping Settings / General / Bluetooth.
Carolyn

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

Contact itunes support. Click Contact Us at the bottom of this page.

Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't get sound to work [SOLVED]

Hi, I'm new to arch/linux in general. Built a computer, and can't get sound to work. I ran Ubuntu for a short period of time, and sound worked there, so I'm assuming there's no hardware issue here.
I'm a little bit stuck as to what I should be doing. Help?
Last edited by uma (2012-01-28 22:51:25)

Start with the wiki: https://wiki.archlinux.org/index.php/Ad … chitecture
If you still can't figure it out and you want help, at least post some info, instead of 'can't get it to work' (this implies that you tried something, but what?).

HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao.

I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?

Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara

Cisco 1812 wireles setup, can't get it to work

Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
end

Okay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Can't get iTunes to work with 2 User Accounts

I've tried to find my specific problem on previous threads but it seems that each situation is just a little different. I have two user accounts on my family shared Windows XP Home edition PC. Last week I installed my son's iPod/iTunes using the install disc. I changed the default to C:\documents and settings\user1\My Documents. Life was good. Then I got an iPod of my own. I followed the same install as above only changed the path to user2's account. I went to iTunes and everything was working just fine for user2. The next time user1 tried to access iTunes on his desktop under his Windows user account, he said it just kept searching. (Windows error message with flashlight) He decided to pop the install disc in and see what happens. (yikes!) He took all of the defaults and left both users with nothing working. Infact at that point iTunes was still on the user desktops but only pages and pages of HTML code would display if you tried to launch iTunes. I deleted all traces of itunes and iPod I could locate and went through the same reinstall process as before. I was able to locate user 2's libary and everything worked fine. (That's mine) Poor user1,(my son) we can't get anything installed to his user. The install disk recognizes only my installation and wants to remove everything first. I;ve done that a few times and still can only get user 2 working but not both.

hi Mommatron!
just checking on something. have you ever had any error messages at any stage of proceedings?
b in particular,
have you ever had an 0x80040707?
love, b

I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning it was gone. Can I get my precious work back? Thanks

Hello
I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning the additions were gone. Can I get my precious work back? Thanks

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Can't get audio to work on my Panasonic Plasma smart TV when I connect a Toslink optical mini to Toslink optical digital to my mid 2009 MacBook pro?

My MAc book pro 5.5 is mid 2009, Processor speed 2.26 GHZ MacOS X VERSION 10.68 Leopard. My Tv is a Panasonic Plasma smart TV TC-P50ST60. I ordered from Amazon a Toslink optical mini to Toslink optical digital cable meant for Macbook pro 2009 forward. I changed the settings on both TV and Mac but I still can't get audio to work on TV. I believe my Mac can't see the audio output from the TV. Any advice with step by step instructions on how to fix it? could it be they sent me defective cables? Thank You for your help.

When I spoke with Apple I made sure I told them that my Macbook Pro was Mid 2009 and he ensured me again that those to cords will work. I realize that with the newer models it does put through both sound and audio but because of my model I don't think it does obviously because I have played with both Sound on my computer and Sound on the TV and nothing works. Sometime Apple can be good but man some people lol he even told me he verified my computer model on the computer and that's what came up.
So new question would be what kind of cable would I be looking for to get audio? Anyone before I call back to Apple and see what they say hahah

I can't get java to work on my Mac. It is installed and enabled. I can't activate java per site because I don't get "click here to activate" box.

I can't get java to work with Firefox on my mac with OS 10.6.8. I did everything suggested and still no luck. Java is installed, enabled, and updated. I can't even activate java per site because I don't get the "click here to activate" box for some reason. Apple support said it's a firefox problem and they can't help me. I need to be able to use java!

hello, please update firefox to the latest version & your OS to 10.6.8.
[[Update Firefox to the latest version]]
http://support.apple.com/kb/HT4561

Arch Still Dead, can't get it to work!!!

Similar Messages

Maybe you are looking for