Arch to Arch: NFS mounts not visible in file explorer

Hi all,
After a long use of Windows I'm coming back to Arch, but with some agony.
I have a NAS which shares my home directory over both cifs and nfs. It runs ARCH.
When I mount the share on my desktop (also Arch) I can browse to it in xterm. I can ls the directories and files without a problem. When I try to open them however, the terminal hangs. Copying, moving, opening, altering ... it all doesnt work. The Xterm just freezes.
When i open the folder with pcmanfm, it doesn't even show the directories.
The weird thing: yesterday it worked, today no go.
Desktop fstab:
192.168.1.2:/home/wouter /media/wouter nfs auto,user 0 0
Server exports:
/home/wouter 192.168.1.53(rw,async,nohide)
- The NFS service are running fine because my ESXi server its datastore is stored over NFS on the NAS.
- The NFS services on the desktop are running.
- Both systems are running the latest package version.
- File permissions are correctly set: 700 wouter:users

Same problem here.

Similar Messages

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

External WD Hard Drive Not Showing In File Explorer

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?
a lot of these USB disks are garbage. Remove the hard disk from the case and connect it to an available desktop which will be able to read the disk.
the cheap usb controllers are often the cause of the problem
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Anyone else having problems with NFS mounts not showing up?

Since Lion, cannot see NFS shares anymore. Folder that had them is still threre but the share will not mount. Worked fine in 10.6.
nfs://192.168.1.234/volume1/video
/Volumes/DiskStation/video
resvport,nolocks,locallocks,intr,soft,wsize=32768,rsize=3276
Any ideas?
Thanks

Since the NFS points show up in the terminal app, go to the local mount directory (i.e. the mount location in the NFS Mounts using Disk Utility) and do the following:
First Create a Link file
sudo ln -s full_local_path link_path_name
sudo ln -s /Volumes/linux/projects/ linuxProjects
Next Create a new directory say in the Root of the Host Drive (i.e. Macintosh HDD)
sudo mkdir new_link_storage_directory
sudo mkdir /Volumes/Macintosh\ HDD/Links
Copy the Above Link file to the new directory
sudo mv link_path_name new_link_storage_directory
sudo mv linuxProjects /Volumes/Macintosh\ HDD/Links/
Then in Finder locate the NEW_LINK_STORAGE_DIRECTORY and then the link file should allow opening of these NFS point points.
Finally, after all links have been created and placed into the NEW..DIRECTORY, Place it into the left sidebar. Now it works just like before.

SQL Expression Fields button not visible in Field Explorer

Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay Audich

Commands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason

Tab Not Visible in Internet Explorer 10

Hi,
We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
Thanks
Sudhir

Sudhir,
The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
But please see {thread:id=2519792} for some ideas.
Good luck,
Howard

NAS not visible in Windows Explorer!

I seem to be the most stupid person here but why is my newly installed NAS (Buffalo LS220D) not visible from the Windows Explorer?

Hi,
First, please make sure that you have setup the NAS corretly, you can refer to the user manual I found on the
Buffalo offical website
http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-220
Meanwhile, please mak sure to turn on network discovery under Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
Make sure that"client for microsoft network" is installed under the network connection\properties
If issue persists, please temporarily turn off firewall and anti-virus porgram since incorrect setting can block the connection.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Files in ZIP Archive not visible in XP explorer

I have a strange problem. I'm sure the solution is something simple, but I seem to be overlooking it. I am creating a .zip archive from within my Java app, zipping up 5-10 straight text files. From what I can tell the file gets created successfully. After the .zip file is created, I can do a jar -tf on the file and it will show them all to me. I can also programatically get a list of the files in the archive and it all looks correct. However, when I try opening the archive file from the Windows XP file explorer (or extracting it to a location) it says that there are no objects in the archive.
Here is the code I am using to create the zip file:
   byte[] buf = new byte[1024];
   try {
      String outputFilename = "somefile.zip"; // The output archive
      ZipOutputStream outStream = new ZipOutputStream(new FileOutputStream(outputFilename));
      System.out.println("createZip: zipping "+_files.length+" files.");
      // _files is an array of c:\somedir\somefile.txt file listings
      for (int i=0; i<_files.length; i++) {
        System.out.println("Adding entry: "+_files);
FileInputStream in = new FileInputStream(_files[i]);
outStream.putNextEntry(new ZipEntry(_files[i]));
int len;
while ((len = in.read(buf)) > 0) {
outStream.write(buf,0,len);
outStream.closeEntry();
in.close();
outStream.finish();
outStream.close();
rv = true;
// ... catch, return value, etc.
Any suggestions or hints would be greatly appreciated..

We had a similar problem
It turned out to be a feature and not a bug
Actually 'vanilla' XP handles those files and is able to open them and it seems that the problem appears only after updating the XP to fix the vulnerability described in:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/security/bulletin/MS02-054.asp
What we have determined is that if the zip file contains '/' at the begining of the path - the compressed folder utility will refuse to open it and will show only a blank pane in explorer. Removing the '/' from path in zip file solves the problem on updated Windows XP.

Connection with Windows 7 PC by USB - PlayBook not Recognized on File Explorer of BlackBerry Desktop

When I connect my PlayBook (OS 2.1) to my Windows 7 PC using USB cable, I do hear the familiar two-tone sound indicating connection, but the Windows File Explorer does not create a Drive Designation letter (such as Z:\). And BlackBerry Desktop Software (latest update), does not recognize it either. I have already tried re-booting the tablet and computer.

uninstall BlackBerry device manager ( not desktop manager), reboot, connect playbook and wait for like 10 minutes for driver to install
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Flash drive not shown in File Explorer

I have plugged in my flash drive into three different usb drive ports (one at a time) and no luck on opening documents on it. Its icon shows on the bottom bar of the desktop, however it is unable to access.
I have restarted my computer to see if it will open in the file explorer folder, but it did not.
I do not know why my Toshiba laptop is unable to read my flash drive when I regularly use it on here for school. Are there any helpful hints to resolve this issue? I would appreciate the help.

Strange! ?:|
What happens if you try to disconnect the external USB HDD and connect it again????
Do you see the little icon in the task bar that the USB device was connected???
One hint:
- Leave the USB HDD connected to the notebook
- Shut down the notebook
- Restart the notebook
- Login into Vista
- Check if the USB HDD was recognized again!
Good luck

When I plug my ipod touch into my PC, it is not recognized in file explorer

When I plug my ipod touch into my pc, it is not recognized in file explorer

It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
Try:
iOS: Unable to import photos to computer
Have you installed any camera or scanning software?
If you have a camera, does the camera show when you connect to computer?

Word 2008 for Mac and NFS mounted home directories "Save File" issues

Greetings everyone,
(Long time lurker, first time poster here)
I admin a small network (under 20 workstaitons) with a centralized NFS server, with user home directories mounted via NFS upon login. Users are authenticated via LDAP. This is all working fine, there is no problem here. The problem lies when my users use Microsoft Word 2008 for Mac. When they attempt to save a file to thier Desktop (or Documents or any folder under thier home dir) they are met with the following message:
(dialog box popup)
"Word cannot save or create this file. The disk maybe be full or write-protected. Try one or more of the following: * Free more memory. * Make sure the disk you want to save the file on is not full, write-protected or damaged. (document-name.ext)"
This happens regardless of file format (Doc, Docx, Txt) and regardless of saved location under the network mounted dir. I've noticed that when saving Word creates a .tmp file in the target directory, which only further confuses me to the underlying cause of the issue.
When users logon to a local machine account and attempt the save, there is no issue.
I have found many posts in other commuity forums, including this one, indicating that the issue is a .TempoaryItems folder in the root of the mounted directory. This folder already exists and is populated with entries such as "folder.2112" (where 2112 is the uid of the LDAP user). I find other posts indicating that this is an issue with Word:2008 and OSX10.8, with finger pointing in either direction, but no real solution.
I have installed all Office for Mac updates from Microsoft (latest version 12.3.6).
I have verified permissions of the user's home dir.
I have also ensured that this issue effects ONLY Microsoft Office 2008 for Mac apps, LibreOffice and other applications have no issue.
Does *ANYONE* have a solution or workaround for this issue? While we're trying to phase Microsoft products out, getting users to ditch Word and Excel is difficult without removing them from systems completely. So any pointers or help would be greatly appreciated.
Thanks.
~k

I can't tell you how to fix bugs in an obsolete version of Office, but a possible workaround is to use mobile home directories under OS X Server. The home directories are hosted locally and synced with the server.

NFS Adapter not picking up file

Hi Guru's,
Scenario is File(NFS) to File(FTP) without using repository part.
The NFS directory name has been maintained correctly. File name is also correct. Channel is active. Checked in RWB also.
All configuration settings are fine. But NFS adapter is not picking up the file and also not showing any error.
Tried following thing but not working
1) Manually deactivating and activating channel in Directory.
2) Stop start channel in Communication channel monitoring.
3) Put exact file name in Communication channel.
4) Testing mode changed from Delete to Test and again test to delete.
5) File type binary to text.

Hello,
Verify the below mentioned points:
a. Is the file adapter locked? ....Visual Admin (till PI7.0) or NWA(for PI7.1 and above) . Entry comes as $XIAdapter*
b. Check permission / authorization to read/ delete the file?
c. Adapter Services are active
-Rahul

Problem: BB 8700g - connected via USB to my PC but not visible on Windows Explorer

when I connect my 8700 g (OS 4.5 / DTM 5.01) to my PC via USB and open the Windows explorer I exspected to see there the device , I don't!!!
I would like to "drag and drop" *.mpg-or *. jpg-files from my PC to the BB device (such as ring tones or photos)
Other smart phones are recognized , I can see them as drive E or F etc, and if I click on e.g. E, I see the contents of E and am thus in a position to transfer the files to the place I want.
So what have I got to do in order to make my device visible and ready for the work I described?
I hope I made myself understood and would appreciate you helping me solve this problem, thank you

Hi!
Here is the list of troubleshooting atricles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WRV210 Administration pages not visible in Internet Explorer

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites. Are there any known solutions to this?

I have a WRV210 at a client site, and after upgrading to firmware 2.0.1.5 I've noticed the same behaviour. Upon inspection of the HTML I notive the right-pane-content area contains a
element right before the form begins. This tag was intended to hold a background image/style for the content area, probably white or at least some colour other than the already blue page background. It has a defined width and height of 1000px * 2622px; If I remove the and re-render the page, the form displays at the top. So it seems this was supposed to encompass the form, but instead because it self-terminates, precedes it with a vacant space 2622px high; It seems then that this is indeed a bug, in many pages.
I've also noticed that the web server on this router is annoyingly slow, though I can't remember if it's any slower than the previous firmware revision. I, like many, purchase Cisco products for the promise of higher quality, greater stability, and better support/documentation/community than other competing manufacturers. Sometimes you win....

Arch to Arch: NFS mounts not visible in file explorer

Similar Messages

Maybe you are looking for