Arch vs Others Boot Time
When I had Fedora 11 on my box, it booted in roughly 15 seconds. I have a Macbook 4.1 Do any recent converts have any knowledge on the difference between fedora 11 and ubuntu boot times in comparison to arch?
Last edited by duke11235 (2009-10-14 04:59:04)
For me, Arch takes about 15 seconds on a 1GHz Athlon, with an additional 10-30 seconds to gain a network connection with net-profiles.
Ubuntu 9.04 takes about 1 minute to boot, not establishing a connection. Fedora 10 takes about 1:15, also not establishing a connection (1 minute for Fedora 11). OpenSUSE 11.1 takes about 1:30-2:00 to boot.
And just for laughs, with Windows 7, I get about 3 minutes for boot time. Windows 2000 takes 1 minute, and Windows XP takes about two minutes. Add another 1-3 minutes to that after login if I have any anti-virus software running (otherwise, it's instant).
Last edited by RetroX (2009-10-19 00:58:04)
Similar Messages
-
Hello, I'm a teen for South Korea using Xfce on a 32bit Arch system. Lately my boot speed has been severely reduced. I am unable to grasp the cause of this reduction and I would like some help. I have been searching for a solution for a few weeks with no positive results.
Here is the output of "systemd-analyze blame
%systemd-analyze blame
1.767s dev-mqueue.mount
1.767s sys-kernel-debug.mount
1.766s systemd-tmpfiles-setup-dev.service
1.766s dev-hugepages.mount
1.748s tmp.mount
1.631s systemd-remount-fs.service
1.567s sys-kernel-config.mount
1.566s systemd-vconsole-setup.service
1.212s systemd-fsck@dev-disk-by\x2duuid-15e066cd\x2decb0\x2d4463\x2d8d89\x2d709a7a74a529.service
1.082s home.mount
661ms netctl@ethernet\x2ddhcp.service
661ms systemd-udev-trigger.service
515ms systemd-sysctl.service
479ms systemd-tmpfiles-clean.service
368ms systemd-logind.service
232ms polkit.service
207ms home-joe-shared.mount
159ms systemd-random-seed-load.service
138ms systemd-readahead-replay.service
51ms systemd-readahead-collect.service
45ms haveged.service
33ms alsa-restore.service
27ms systemd-update-utmp.service
25ms systemd-readahead-done.service
24ms systemd-tmpfiles-setup.service
22ms rtkit-daemon.service
9ms upower.service
4ms systemd-journal-flush.service
4ms systemd-udevd.service
3ms systemd-user-sessions.service
3ms ntpd.service
And the output of systemd-analyze time
%systemd-analyze time
Startup finished in 3.540s (kernel) + 1min 36.330s (userspace) = 1min 39.870sWait a minute… your mount units are taking ≤1.2s, and are presumably being parallelized as much as possible. But your netctl time is 17.057s! It would seem to me that the greater concern here should not be the mounts so much finding a way to use netctl that doesn't block the system from reaching the multi-user.target (or beyond).
Don't get me wrong, netctl is awesome and I really do like it. But it would seem as though you are using just a simple wired connection. So if the time it takes for your current netctl@ethernet\x2ddhcp is not an issue, I would probably suggest trying to simplify things and using just the basic dhcpcd@<interface>.service.
But the question here is boot time. So I think that if you want to stick with netctl, you should use the ifplug compatibility so that the unit can start and report success before a full connectable IP is resolved. So try disabling the current unit you are using (either with the netctl CLI interface or systemctl). Then enable the netctl-ifplug thing instead (ie. systemctl enable netctl-ifplugd@<interface>.service).
The [email protected] should take just a couple seconds to get itself going, and after it has loaded the ethernet-dhcp profile, it will report success, and your boot will continue. When you reach the desktop, you likely won't have a working network connection for a few moments. This is because the [email protected] will likely still take a similar amount of time to actually resolve the IP, but this portion will just not be reported as part of your overall boot time.
Alternatively, you could use something like wicd, connman, or network-manager. But those might be overkill for what you have going there (as in, no wireless or raoming, etc). You should also be aware that NetworkManager is shipped with a service called NetworkManager-wait-online.service, and what that does is… unsurprisingly, wait until you are online before reposting success. So this unit is pulled in automatically by NetworkManager.service and will delay your boot in the same way as it is now. So when I use NetworkManager, I just mask the service. -
Quad with 7800GT boot time longer than other cards?
my quad with raptor 74gb and 3gb of ram plus 7800gt takes 49 seconds to boot consistently. fresh system. I saw over at barefeats.com that theirs boots in 29 seconds but without the 7800gt. can anyone who has both or has access to both confirm that the 7800gt indeed is the factor adding 20 seconds to my boot time?
thanks.
-steveHow long is it before you see the first apple?
The time period between the apple and a complete desktop is more hard drive speed related and this is what barefeats may be refering to as boot time.
The time period between "dong" and first apple is when the machine checks the RAM and other things, perhaps the more RAM, the more time?
Just so happens the "dong" to first apple is about 20 seconds on my machine and my total boot time is about 30 seconds. -
I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?
It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.
-
I'm having mixed feelings about Mountain Lion. On the one hand, I like some of the features that more closely integrate with my iWhatever. I appreciate having the notes, reminders, imessage, etc that makes it so I can switch from a mobile device to desktop device.
But on the other hand, I see far more beach balls, such as when simply starting Safari. Applications take a long time to initialize as they try to, I'm guessing, sync with iCloud. I get more application hangs. You know, the ones that leave you dead in the water until you reboot, but then mysteriously vanish for weeks. and boot time is frustrating. I spend far more time waiting for my desktop and applications to initialize and stabilize after a login.
Granted, much of my frustration here is not based in the technical. It's based on "user experience" where I don't normally pay attention when it's working well. It just feels to me that the behaviour of ML is much more similar to windows of the past, where a reboot once or twice a day cured most ills.
Is it just me or does anyone else have similar feelings of disappointment.
thanks!Hmmmmm... OK y'all have got me thinking.
I normally run disk check and repair, this time it found a number of files and links related to printers and image devices, stuff that isn't likely part of the issue. There were three links, however, related to core graphics. the permissionss were rwxr-xr-x when they should be rwxrwxrwx. I don't think those are involved, but alas they are fixed.
It seems like much of my issues seems to revolve around the mounting/access of resources outside my laptop, be it icloud, nfs server, samba server, etc. RIght at this moment, Finder is hung hard. I tried to force restart it, and in the Force quit menu I now see two Finders. One will kill and restart immediately, one does nothing. And I can't open a finder window period.
In fact, just before writing this, I was attempting to edit a text document in StarOffice, and StarOffice went to lunch trying to access my samba share. Now before y'all go nuts about any samba server side issues, let me say that while my MBP is having issues accessing my samba shares, none of my other computing devices are. W7 laptop pulls up samba file system as fast as if not faster than it's own local file systems. My other MBP (older core2 duo, but still on mountain lion) does not seem to have any issues. I don't believe it a server side issue.
So I asked myself, what's different on my 2.66 gb i7 MBP?? It just occurred to me that I have one piece of software that's pretty deeply rooted in file system management.... Tuxera NFS. I see that it has not been updated since updating to Mountain Lion, so I am going to check that out, and will post results. -
How to get a lower boot time in eee?
I've managed to lower my boot time to 14 seconds on the asus eee, but I know it can get lower that that... Apart from recompiling the kernel (which I intend to do last), can you suggest anything else might help?
Bootchart
My rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Athens"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="asuseee"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng @crond @hal gdm)
My rc.sysinit
#!/bin/bash
# /etc/rc.sysinit
. /etc/rc.conf
. /etc/rc.d/functions
echo " "
printhl "Arch Linux\n"
printhl "${C_H2}http://www.archlinux.org"
printhl "Copyright 2002-2007 Judd Vinet"
printhl "Copyright 2007-2009 Aaron Griffin"
printhl "Distributed under the GNU General Public License (GPL)"
printsep
# mount /proc, /sys and our RAM /dev
/bin/mount -n -t ramfs none /dev
/bin/mount -n -t proc none /proc
/bin/mount -n -t sysfs none /sys
# Create our default nodes that minilogd may need
/bin/mknod /dev/null c 1 3
/bin/mknod /dev/zero c 1 5
/bin/mknod /dev/console c 5 1
# More initial /dev setup that udev doesn't do
/bin/ln -snf /proc/self/fd /dev/fd
/bin/ln -snf /proc/self/fd/0 /dev/stdin
/bin/ln -snf /proc/self/fd/1 /dev/stdout
/bin/ln -snf /proc/self/fd/2 /dev/stderr
/bin/ln -snf /proc/kcore /dev/core
/bin/mkdir /dev/pts
/bin/mkdir /dev/shm
# start up our mini logger until syslog takes over
/sbin/minilogd
# anything more serious than KERN_WARNING goes to the console
# 'verbose' cmdline parameter enables more messages
if /bin/grep -q " verbose" /proc/cmdline; then
/bin/dmesg -n 8
else
/bin/dmesg -n 3
fi
# enable rtc access
/sbin/modprobe rtc-cmos >/dev/null 2>&1
RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}"
if [ -n "$RTC_MAJOR" ]; then
/bin/mkdir /dev/misc/
/bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0
/bin/ln -s /dev/misc/rtc0 /dev/rtc
fi
HWCLOCK_PARAMS="--hctosys"
if [ "$HARDWARECLOCK" = "UTC" ]; then
HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
else
HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
fi
if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
fi
# Set clock early to fix some bugs with filesystem checks
# Clock is set again later to match rc.conf
if [ -f /etc/localtime ]; then
/sbin/hwclock $HWCLOCK_PARAMS --noadjfile
fi
echo > /proc/sys/kernel/hotplug
if [ -x /sbin/udevadm -a -d /sys/block ]; then
# We have udev and /sys appears to be mounted, use UDev
stat_busy "Starting UDev Daemon"
/sbin/udevd --daemon
/sbin/udevadm trigger
stat_done
else
# Static /dev, our last resort
status "Using static /dev filesystem" true
fi
# Load modules from the MODULES array defined in rc.conf
if ! [ "$load_modules" = "off" ]; then
if [ -f /proc/modules ]; then
stat_busy "Loading Modules"
for mod in "${MODULES[@]}"; do
if [ "$mod" = "${mod#!}" ]; then
/sbin/modprobe $mod
fi
done
stat_done
fi
if [ -d /proc/acpi ]; then
stat_busy "Loading standard ACPI modules"
ACPI_MODULES="ac battery button fan processor thermal"
k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')"
j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')"
#add disabled MODULES (!) to blacklist - much requested feature
for m in ${j}; do
[ "$m" != "${m#!}" ] && k="${k} ${m#!}"
done
# add disablemodules= from commandline to blacklist
k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')"
for n in ${ACPI_MODULES}; do
if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then
/sbin/modprobe $n > /dev/null 2>&1
fi
done
stat_done
fi
fi
# run udev uevents
if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
stat_busy "Loading UDev uevents"
udevstart="$(/bin/date +%s%0N)"
# /sbin/udevadm trigger
/sbin/udevadm settle
stat_done
udevend="$(/bin/date +%s%0N)"
printhl " UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms"
fi
# bring up the loopback interface
if [ -d /sys/class/net/lo ]; then
stat_busy "Bringing up loopback interface"
/sbin/ifconfig lo 127.0.0.1 up
if [ $? -ne 0 ]; then
stat_fail
else
stat_done
fi
fi
# If necessary, find md devices and manually assemble RAID arrays
#if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then
# # udev won't create these md nodes, so we do it ourselves
# for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do
# path=$(echo $dev | /bin/sed 's|/[^/]*$||')
# node=$(echo $dev | /bin/sed "s|^$path/||")
# minor=$(echo $node | /bin/sed 's|^[^0-9]*||')
# [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor
# done
# status "Activating RAID arrays" /sbin/mdadm --assemble --scan
#fi
if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
if [ -x /sbin/lvm -a -d /sys/block ]; then
# Kernel 2.6.x, LVM2 groups
/sbin/modprobe -q dm-mod 2>/dev/null
stat_busy "Activating LVM2 groups"
/sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
/sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
if [ $? -ne 0 ]; then
stat_fail
else
stat_done
fi
fi
fi
# Set up non-root encrypted partition mappings
#if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
# /sbin/modprobe -q dm-mod 2>/dev/null
# stat_busy "Unlocking encrypted volumes:"
# csfailed=0
# CS=/sbin/cryptsetup.static
# do_crypt() {
# if [ $# -ge 3 ]; then
# cname="$1"
# csrc="$2"
# cpass="$3"
# shift 3
# copts="$*"
# stat_append "${cname}.."
# # For some fun reason, the parameter ordering varies for
# # LUKS and non-LUKS devices. Joy.
# if [ "${cpass}" = "SWAP" ]; then
# # This is DANGEROUS! The only possible safety check
# # is to not proceed in case we find a LUKS device
# # This may cause dataloss if it is not used carefully
# if $CS isLuks $csrc 2>/dev/null; then
# false
# else
# $CS -d /dev/urandom $copts create $cname $csrc >/dev/null
# if [ $? -eq 0 ]; then
# stat_append "creating swapspace.."
# /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null
# fi
# fi
# elif [ "${cpass}" = "ASK" ]; then
# printf "\nOpening '${cname}' volume:\n"
# if $CS isLuks $csrc 2>/dev/null; then
# $CS $copts luksOpen $csrc $cname < /dev/console
# else
# $CS $copts create $cname $csrc < /dev/console
# fi
# elif [ "${cpass:0:1}" != "/" ]; then
# if $CS isLuks $csrc 2>/dev/null; then
# echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null
# else
# echo "$cpass" | $CS $copts create $cname $csrc >/dev/null
# fi
# else
# if $CS isLuks $csrc 2>/dev/null; then
# $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null
# else
# $CS -d $cpass $copts create $cname $csrc >/dev/null
# fi
# fi
# if [ $? -ne 0 ]; then
# csfailed=1
# stat_append "failed "
# else
# stat_append "ok "
# fi
# fi
# while read line; do
# eval do_crypt "$line"
# done </etc/crypttab
# if [ $csfailed -eq 0 ]; then
# stat_done
# else
# stat_fail
# fi
# # Maybe someone has LVM on an encrypted block device
# if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
# if [ -x /sbin/lvm -a -d /sys/block ]; then
# /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
# /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
# fi
# fi
#fi
status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
FORCEFSCK=
[ -f /forcefsck ] && FORCEFSCK="-- -f"
NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk"
if [ -x /sbin/fsck ]; then
stat_busy "Checking Filesystems"
if /bin/grep -qw quiet /proc/cmdline; then
/sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1
else
/sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null
fi
fsckret=$?
if [ ${fsckret} -gt 1 ]; then
stat_fail
if [ $((${fsckret}&2)) -eq 2 ]; then
echo
echo "********************** REBOOT REQUIRED *********************"
echo "* *"
echo "* The system will be rebooted automatically in 15 seconds. *"
echo "* *"
echo "************************************************************"
echo
/bin/sleep 15
else
echo
echo "***************** FILESYSTEM CHECK FAILED ****************"
echo "* *"
echo "* Please repair manually and reboot. Note that the root *"
echo "* file system is currently mounted read-only. To remount *"
echo "* it read-write type: mount -n -o remount,rw / *"
echo "* When you exit the maintenance shell the system will *"
echo "* reboot automatically. *"
echo "* *"
echo "************************************************************"
echo
/sbin/sulogin -p
fi
echo "Automatic reboot in progress..."
/bin/umount -a
/bin/mount -n -o remount,ro /
/sbin/reboot -f
exit 0
fi
stat_done
fi
stat_busy "Mounting Local Filesystems"
/bin/mount -n -o remount,rw /
/bin/rm -f /etc/mtab*
# make sure / gets written to /etc/mtab
/bin/mount -o remount,rw /
# Write /proc, /sys and /dev to /etc/mtab
if [ -e /proc/mounts ]; then
/bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
fi
# now mount all the local filesystems
/bin/mount -a -t $NETFS
stat_done
#status "Activating Swap" /sbin/swapon -a
stat_busy "Configuring System Clock"
if [ ! -f /var/lib/hwclock/adjtime ]; then
echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
fi
if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
/bin/rm -f /etc/localtime
/bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
fi
/sbin/hwclock $HWCLOCK_PARAMS
stat_done
if [ -f /var/run/random-seed ]; then
stat_busy "Initializing Random Seed"
/bin/cat /var/run/random-seed >/dev/urandom
stat_done
fi
stat_busy "Removing Leftover Files"
/bin/rm -f /etc/nologin &>/dev/null
/bin/rm -f /etc/shutdownpid &>/dev/null
/bin/rm -f /var/lock/* &>/dev/null
/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
/bin/rm -f /forcefsck &>/dev/null
(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; )
: > /var/run/utmp
/bin/chmod 0664 /var/run/utmp
# Keep {x,k,g}dm happy with xorg
/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix
/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix
stat_done
#status "Updating Shared Library Links" /sbin/ldconfig
if [ "$HOSTNAME" != "" ]; then
status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME
fi
# Set the NIS domain name, if necessary
[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname
if [ "$NISDOMAINNAME" != "" ]; then
status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME
fi
status "Updating Module Dependencies" /sbin/depmod -A
# Flush old locale settings
: >/etc/profile.d/locale.sh
/bin/chmod 755 /etc/profile.d/locale.sh
# Set user defined locale
[ -z "$LOCALE" ] && LOCALE="en_US"
stat_busy "Setting Locale: $LOCALE"
echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
stat_done
if echo "$LOCALE" | /bin/grep -qi utf ; then
stat_busy "Setting Consoles to UTF-8 mode"
# UTF-8 consoles are default since 2.6.24 kernel
# this code is needed not only for older kernels,
# but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
for i in $(/usr/bin/seq 0 63); do
/usr/bin/kbd_mode -u < /dev/vc/${i}
printf "\e%%G" > /dev/vc/${i}
done
# the $CONSOLE check helps us avoid this when running scripts from cron
echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh
stat_done
[ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP
else
stat_busy "Setting Consoles to legacy mode"
# make non-UTF-8 consoles work on 2.6.24 and newer kernels
for i in $(/usr/bin/seq 0 63); do
/usr/bin/kbd_mode -a < /dev/vc/${i}
printf "\e%%@" > /dev/vc/${i}
done
# the $CONSOLE check helps us avoid this when running scripts from cron
echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh
stat_done
[ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
fi
if [ -n "$CONSOLEFONT" ]; then
stat_busy "Loading Console Font: $CONSOLEFONT"
#CONSOLEMAP in UTF-8 shouldn't be used
if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then
CONSOLEMAP=""
fi
for i in $(/usr/bin/seq 0 63); do
if [ -n "$CONSOLEMAP" ]; then
/usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
else
/usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
fi
done
if [ $? -ne 0 ]; then
stat_fail
else
for i in $(/usr/bin/seq 0 63); do
printf "\e(K" > /dev/vc/${i}
done
# the $CONSOLE check helps us avoid this when running scripts from cron
echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh
stat_done
fi
fi
# Adding persistent network/cdrom generated rules
#if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then
# stat_busy "Adding persistent cdrom udev rules"
# /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules
# stat_done
#fi
if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then
stat_busy "Adding persistent network udev rules"
/bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules
stat_done
fi
# Save our dmesg output from this boot
if [ -f /var/log/dmesg.log ]; then
/bin/rm /var/log/dmesg.log
fi
/bin/dmesg > /var/log/dmesg.log
# End of file
# vim: set ts=2 noet:DreamAxe wrote:
quarkup wrote:Once the modules are all loaded, by enabling this option I "consume" only ~70ms
I see that you mention milliseconds again, how exactly do you count these milliseconds? Since my last message, I've tried other I/O schedulers and three out of four get the same result. I believe that there IS a difference among schedulers but since bootchart displays the results in seconds, I can't compare them. If you could just tell me how you count in ms I could compare them and see which one is faster at booting the eee. In case you're wondering, noop is the slowest, requiring 16sec to boot the eee while cfq, anticipatory and deadline require 14sec according to bootchart.
I'm talking about "loading" modules, not the full-boot time..
After turning on the PC, there will be shown on the virtual terminal the time taken by Udev to load all modules.
as you can see
Last edited by quarkup (2009-02-20 13:49:55) -
Wired connection doesn't work if cable is not plugged in at boot time
Hey all,
I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
Here's some information regarding the system:
It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
The router is a Linksys EA2700/N600
journalctl -u NetworkManager
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
ping -c 10 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
--- 8.8.8.8 ping statistics ---
100 packets transmitted, 24 received, 76% packet loss, time 99062ms
rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
#option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
#noipv4ll
#Disable IPv6
#noipv6rs
#noipv6
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=keyfile
dhcp=dhcpcd
## Set static hostname
#[keyfile]
#hostname=foobar
## HTTP-based connectivity check
#[connectivity]
#uri=http://nmcheck.gnome.org/check_network_status.txt
I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.Try to use dhclient perhaps? Might I also suggest letting systemd deal with the dhcp issue and not NM. That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card. I'm no guru but I got thinking about this when I saw this in your output:
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt. -
Boot time goes from seconds to minutes with udev and systemd
A few weeks ago updated and saw that on reboot I was getting messages from systemd that it was waiting for all my LVM partitions, and then finally that:
'A start job is running for udev Wait for Complete Device Initialization'
This has never happened before and I can't find any information about it in dmesg.
Here is my fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=f9f12b36-2333-4c46-949a-0bd86e1ab254
/dev/mapper/Linux-Arch / ext4 rw,relatime,data=ordered 0 1
# UUID=21ee7aa4-234e-463d-af2a-6c4cb3551ea8
/dev/mapper/Linux-Home /home ext4 rw,relatime,data=ordered 0 2
# UUID=E421-470F LABEL=SYSTEM_DRV
/dev/sda2 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# UUID=11bf5a3f-86a5-48b7-93da-994e39463f0d
/dev/mapper/Linux-Swap none swap defaults 0 0
# Windows
# /dev/sda5 /mnt/Windows ntfs-3g defaults,ro,noauto 0 0
I've been digging around for a few weeks and I can't find anything and my boot time is really slow.
systemd-analyze blame:
1min 1.644s systemd-udev-settle.service
10.079s systemd-udev-trigger.service
9.999s systemd-remount-fs.service
1.003s lvm2-pvscan@8:8.service
795ms systemd-timesyncd.service
700ms systemd-update-utmp.service
583ms systemd-sysctl.service
560ms rtkit-daemon.service
469ms udisks2.service
449ms NetworkManager.service
438ms kmod-static-nodes.service
363ms systemd-vconsole-setup.service
214ms tmp.mount
184ms sys-kernel-debug.mount
144ms sys-kernel-config.mount
123ms systemd-tmpfiles-clean.service
116ms dev-mqueue.mount
90ms [email protected]
85ms systemd-logind.service
82ms dev-hugepages.mount
79ms bluetooth.service
57ms [email protected]
42ms polkit.service
31ms accounts-daemon.service
31ms wpa_supplicant.service
24ms systemd-fsck@dev-mapper-Linux\x2dHome.service
20ms colord.service
20ms gdm.service
20ms upower.service
19ms [email protected]
18ms [email protected]
17ms [email protected]
15ms boot.mount
12ms systemd-tmpfiles-setup-dev.service
8ms dev-mapper-Linux\x2dSwap.swap
8ms systemd-tmpfiles-setup.service
8ms systemd-journal-flush.service
5ms home.mount
5ms systemd-user-sessions.service
4ms systemd-backlight@backlight:intel_backlight.service
3ms systemd-random-seed.service
2ms systemd-udevd.service
1ms sys-fs-fuse-connections.mount
EDIT 2: Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
[ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xc3217018-0xc3227057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3217017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3217018-0x00000000c3227057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3227058-0x00000000c4daffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f62000) (15MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f62000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fba4000) (1019MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fba4000-0x0000000080000000) (4MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3217000) (0MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3217000-0x00000000c3228000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3228000-0x00000000c418a000) (15MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bf000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
[ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c76e6000) (19MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c76e6000-0x00000000c864a000) (15MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c8882000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8882000-0x00000000c88b0000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c88b0000-0x00000000c88b1000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b1000-0x00000000c8c65000) (3MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7a000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7a000-0x00000000ca3bf000) (23MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
[ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
[ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
[ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
[ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
[ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
[ 0.000000] efi: mem67: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
[ 0.000000] efi: mem68: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
[ 0.000000] efi: mem69: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
[ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
[ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
[ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
[ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
[ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
[ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
[ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
[ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
[ 0.000000] [mem 0xca600000-0xca7befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fba4000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000cafbb000 000040
[ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
[ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
[ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
[ 0.000000] On node 0 totalpages: 2066246
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12807 pages used for memmap
[ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
[ 0.000000] Normal zone: 19416 pages used for memmap
[ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3217000-0xc3217fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3227000-0xc3227fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86656 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7988560K/8264984K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 276424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.263 MHz processor
[ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.52 BogoMIPS (lpj=24942630)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20131218
[ 0.008110] ACPI: All ACPI Tables successfully acquired
[ 0.034617] Security Framework initialized
[ 0.034625] Yama: becoming mindful.
[ 0.035238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.039006] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.039017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.039253] Initializing cgroup subsys memory
[ 0.039259] Initializing cgroup subsys devices
[ 0.039260] Initializing cgroup subsys freezer
[ 0.039262] Initializing cgroup subsys net_cls
[ 0.039264] Initializing cgroup subsys blkio
[ 0.039291] CPU: Physical Processor ID: 0
[ 0.039293] CPU: Processor Core ID: 0
[ 0.039298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039769] mce: CPU supports 7 MCE banks
[ 0.039782] CPU0: Thermal monitoring enabled (TM1)
[ 0.039792] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.039910] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.043468] ftrace: allocating 20111 entries in 79 pages
[ 0.054896] dmar: Host address width 36
[ 0.054899] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054906] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.054908] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.054912] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.054914] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
[ 0.054915] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
[ 0.054992] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.054994] HPET id 0 under DRHD base 0xfed91000
[ 0.054995] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.055169] Enabled IRQ remapping in x2apic mode
[ 0.055170] Enabling x2apic
[ 0.055172] Enabled x2apic
[ 0.055180] Switched APIC routing to cluster x2apic.
[ 0.055649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155770] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
[ 0.155781] TSC deadline timer enabled
[ 0.155793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.155800] ... version: 3
[ 0.155802] ... bit width: 48
[ 0.155803] ... generic registers: 4
[ 0.155804] ... value mask: 0000ffffffffffff
[ 0.155805] ... max period: 0000ffffffffffff
[ 0.155806] ... fixed-purpose events: 3
[ 0.155807] ... event mask: 000000070000000f
[ 0.157083] x86: Booting SMP configuration:
[ 0.157086] .... node #0, CPUs: #1 #2 #3
[ 0.198397] x86: Booted up 1 node, 4 CPUs
[ 0.198401] smpboot: Total of 4 processors activated (19954.10 BogoMIPS)
[ 0.202933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.203185] devtmpfs: initialized
[ 0.206444] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
[ 0.207361] pinctrl core: initialized pinctrl subsystem
[ 0.207403] RTC time: 18:04:53, date: 11/03/14
[ 0.207440] NET: Registered protocol family 16
[ 0.207534] cpuidle: using governor ladder
[ 0.207535] cpuidle: using governor menu
[ 0.207568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.207570] ACPI: bus type PCI registered
[ 0.207572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.207648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.207651] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.207745] PCI: Using configuration type 1 for base access
[ 0.208531] bio: create slab <bio-0> at 0
[ 0.208645] ACPI: Added _OSI(Module Device)
[ 0.208647] ACPI: Added _OSI(Processor Device)
[ 0.208648] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.208649] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.211733] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.236410] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.236803] ACPI: Dynamic OEM Table Load:
[ 0.236805] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.266214] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.266634] ACPI: Dynamic OEM Table Load:
[ 0.266636] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.296118] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.296501] ACPI: Dynamic OEM Table Load:
[ 0.296503] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.773800] ACPI: Interpreter enabled
[ 0.773808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.773813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.773829] ACPI: (supports S0 S3 S4 S5)
[ 0.773831] ACPI: Using IOAPIC for interrupt routing
[ 0.773864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.774030] ACPI: No dock devices found.
[ 0.780437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.780443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.780579] \_SB_.PCI0:_OSC invalid UUID
[ 0.780581] _OSC request data:1 1f 0
[ 0.780585] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.781130] PCI host bridge to bus 0000:00
[ 0.781133] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.781136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.781137] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.781139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.781141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.781143] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.781145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.781147] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.781148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.781150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.781152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.781154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.781156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.781157] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.781159] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.781161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.781163] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 0.781171] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.781277] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.781291] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.781299] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.781305] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.781403] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.781415] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.781541] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.781567] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
[ 0.781646] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.781694] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.781745] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.781772] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
[ 0.781856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.781955] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.781980] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
[ 0.782080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.782144] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.782193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.782212] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
[ 0.782296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.782345] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.782396] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.782420] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
[ 0.782520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.782583] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.782634] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.782828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.782850] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.782859] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.782869] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.782877] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.782887] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.782897] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
[ 0.782948] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.783031] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.783050] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
[ 0.783074] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.783173] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.783198] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
[ 0.783553] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783672] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783790] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783908] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.783966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.784076] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.784121] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.784209] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.784212] vgaarb: loaded
[ 0.784213] vgaarb: bridge control possible 0000:00:02.0
[ 0.784333] PCI: Using ACPI for IRQ routing
[ 0.786165] PCI: pci_cache_line_size set to 64 bytes
[ 0.786172] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.786212] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.786214] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.786216] e820: reserve RAM buffer [mem 0xc3217018-0xc3ffffff]
[ 0.786217] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
[ 0.786219] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
[ 0.786221] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.786222] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[ 0.786315] NetLabel: Initializing
[ 0.786317] NetLabel: domain hash size = 128
[ 0.786318] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.786331] NetLabel: unlabeled traffic allowed by default
[ 0.786356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.786361] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.788395] Switched to clocksource hpet
[ 0.793449] pnp: PnP ACPI init
[ 0.793466] ACPI: bus type PNP registered
[ 0.793581] pnp 00:00: [dma 4]
[ 0.793609] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.793633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.793732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.793773] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.793820] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.793822] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.793824] system 00:04: [io 0xffff] has been reserved
[ 0.793826] system 00:04: [io 0xffff] has been reserved
[ 0.793829] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.793831] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.793833] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.793835] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.793838] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.793870] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.793919] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.793922] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.793963] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.794001] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
[ 0.794134] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.794137] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.794139] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.794141] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.794143] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.794145] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.794148] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.794150] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.794152] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.794154] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ 0.794157] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.794451] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.794453] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.794456] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.794473] pnp: PnP ACPI: found 11 devices
[ 0.794475] ACPI: bus type PNP unregistered
[ 0.801229] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
[ 0.801237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.801239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.801241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.801243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.801245] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.801247] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.801249] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.801251] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.801253] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.801254] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.801256] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.801258] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.801260] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.801262] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.801264] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.801266] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
[ 0.801299] NET: Registered protocol family 2
[ 0.801504] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.801681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.801864] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.801881] TCP: reno registered
[ 0.801894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.801927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.802001] NET: Registered protocol family 1
[ 0.802012] pci 0000:00:02.0: Boot video device
[ 0.838581] PCI: CLS 64 bytes, default 64
[ 0.838623] Unpacking initramfs...
[ 0.931743] Freeing initrd memory: 4464K (ffff88007fba4000 - ffff880080000000)
[ 0.931755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.931757] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
[ 0.931789] Simple Boot Flag at 0x44 set to 0x1
[ 0.932025] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 0.932033] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 0.932042] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 0.932051] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 0.932111] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.932127] Scanning for low memory corruption every 60 seconds
[ 0.932408] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.948267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.949675] zbud: loaded
[ 0.949848] VFS: Disk quotas dquot_6.5.2
[ 0.949897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.950024] msgmni has been set to 15732
[ 0.950080] Key type big_key registered
[ 0.950224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.950262] io scheduler noop registered
[ 0.950265] io scheduler deadline registered (default)
[ 0.950296] io scheduler cfq registered
[ 0.950355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.950370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.950401] efifb: probing for efifb
[ 0.950423] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5628k, total 5625k
[ 0.950425] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.950426] efifb: scrolling: redraw
[ 0.950428] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.955222] Console: switching to colour frame buffer device 200x56
[ 0.959939] fb0: EFI VGA frame buffer device
[ 0.959947] intel_idle: MWAIT substates: 0x21120
[ 0.959948] intel_idle: v0.4 model 0x3A
[ 0.959949] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.960140] GHES: HEST is not enabled!
[ 0.960192] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.960674] Linux agpgart interface v0.103
[ 0.960719] rtc_cmos 00:05: RTC can wake from S4
[ 0.960854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.960891] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.960901] Intel P-state driver initializing.
[ 0.960913] Intel pstate controlling: cpu 0
[ 0.960933] Intel pstate controlling: cpu 1
[ 0.960948] Intel pstate controlling: cpu 2
[ 0.960965] Intel pstate controlling: cpu 3
[ 0.960993] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.961133] TCP: cubic registered
[ 0.961239] NET: Registered protocol family 10
[ 0.961427] NET: Registered protocol family 17
[ 0.961965] registered taskstats version 1
[ 0.962642] Magic number: 6:677:88
[ 0.962705] acpi INT3F0D:00: hash matches
[ 0.962828] rtc_cmos 00:05: setting system clock to 2014-11-03 18:04:54 UTC (1415037894)
[ 0.963002] PM: Checking hibernation image partition /dev/mapper/Linux-Swap
[ 0.963010] PM: Hibernation image not present or could not be loaded.
[ 0.964972] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
[ 0.964975] Write protecting the kernel read-only data: 8192k
[ 0.970240] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.971926] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
[ 0.980028] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 0.981987] systemd-udevd[57]: starting version 216
[ 0.993396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.999168] ACPI: bus type USB registered
[ 0.999188] usbcore: registered new interface driver usbfs
[ 0.999195] usbcore: registered new interface driver hub
[ 0.999618] SCSI subsystem initialized
[ 0.999671] usbcore: registered new device driver usb
[ 1.000171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.000324] ehci-pci: EHCI PCI platform driver
[ 1.000472] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.000479] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.000498] ehci-pci 0000:00:1a.0: debug port 2
[ 1.001114] libata version 3.00 loaded.
[ 1.004412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.004425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
[ 1.005570] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.005576] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.018706] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.018976] hub 1-0:1.0: USB hub found
[ 1.018989] hub 1-0:1.0: 2 ports detected
[ 1.019277] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.019281] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.019293] ehci-pci 0000:00:1d.0: debug port 2
[ 1.023202] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.023218] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
[ 1.028001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.038738] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.039375] hub 2-0:1.0: USB hub found
[ 1.039401] hub 2-0:1.0: 2 ports detected
[ 1.039970] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.039984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.040112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.040137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.040384] hub 3-0:1.0: USB hub found
[ 1.040404] hub 3-0:1.0: 4 ports detected
[ 1.040970] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.040975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.041377] hub 4-0:1.0: USB hub found
[ 1.041406] hub 4-0:1.0: 4 ports detected
[ 1.041933] ahci 0000:00:1f.2: version 3.0
[ 1.042141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.042189] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[ 1.042192] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.042951] scsi0 : ahci
[ 1.043089] scsi1 : ahci
[ 1.043205] scsi2 : ahci
[ 1.043321] scsi3 : ahci
[ 1.043443] scsi4 : ahci
[ 1.043605] scsi5 : ahci
[ 1.043699] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
[ 1.043704] ata2: DUMMY
[ 1.043707] ata3: DUMMY
[ 1.043709] ata4: DUMMY
[ 1.043711] ata5: DUMMY
[ 1.043713] ata6: DUMMY
[ 1.339195] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.389168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.390125] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.390134] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
[ 1.390139] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.390821] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.390986] ata1.00: configured for UDMA/133
[ 1.391372] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
[ 1.401296] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.401579] sd 0:0:0:0: [sda] Write Protect is off
[ 1.401588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.401790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.404906] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.406850] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.490272] hub 1-1:1.0: USB hub found
[ 1.490465] hub 1-1:1.0: 6 ports detected
[ 1.512747] device-mapper: uevent: version 1.0.3
[ 1.512926] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 1.519284] bio: create slab <bio-1> at 1
[ 1.545404] PM: Starting manual resume from disk
[ 1.545409] PM: Hibernation image partition 254:0 present
[ 1.545411] PM: Looking for hibernation image.
[ 1.545576] PM: Image not found (code -22)
[ 1.545578] PM: Hibernation image not present or could not be loaded.
[ 1.579429] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 1.579432] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 1.583409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.584558] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 1.584561] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 1.609376] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.665486] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
[ 1.665742] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
[ 1.665813] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
[ 1.665853] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
[ 1.665880] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
[ 1.665906] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
[ 1.665932] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
[ 1.665987] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 1.666093] systemd[1]: Detected architecture 'x86-64'.
[ 1.667499] systemd[1]: Set hostname to <arch-yogi>.
[ 1.668059] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd.
[ 1.668094] systemd[1]: Installed release agent.
[ 1.668133] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
[ 1.669521] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 147.
[ 1.669581] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 148.
[ 1.669637] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 149.
[ 1.669689] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 150.
[ 1.669743] systemd[146]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 151.
[ 1.669826] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-efi-boot-generator as 152.
[ 1.669899] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-debug-generator as 153.
[ 1.669992] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 154.
[ 1.671020] systemd[146]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded.
[ 1.677317] systemd[146]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
[ 1.678493] systemd[146]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
[ 1.678499] systemd[146]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
[ 1.689210] systemd[146]: /usr/lib/systemd/system-generators/lvm2-activation-generator succeeded.
[ 1.689216] systemd[146]: /usr/lib/systemd/system-generators/systemd-efi-boot-generator succeeded.
[ 1.689220] systemd[146]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded.
[ 1.689223] systemd[146]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded.
[ 1.689278] systemd[1]: /usr/lib/systemd/system-generators succeeded.
[ 1.689509] systemd[1]: Looking for unit files in (higher priority first):
[ 1.689512] systemd[1]: /etc/systemd/system
[ 1.689513] systemd[1]: /run/systemd/system
[ 1.689514] systemd[1]: /run/systemd/generator
[ 1.689516] systemd[1]: /usr/local/lib/systemd/system
[ 1.689517] systemd[1]: /usr/lib/systemd/system
[ 1.689518] systemd[1]: /run/systemd/generator.late
[ 1.689520] systemd[1]: SysV init scripts and rcN.d links support disabled
[ 1.696010] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
[ 1.699470] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
[ 1.704745] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
[ 1.711661] systemd[1]: Failed to load configuration for plymouth-quit.service: No such file or directory
[ 1.712238] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
[ 1.720811] systemd[1]: Using notification socket /run/systemd/notify
[ 1.720824] systemd[1]: Successfully created private D-Bus server.
[ 1.720829] systemd[1]: -.mount changed dead -> mounted
[ 1.720856] systemd[1]: Activating default unit: default.target
[ 1.720860] systemd[1]: Trying to enqueue job graphical.target/start/isolate
[ 1.720991] systemd[1]: Looking at job [email protected]/stop conflicted_by=yes
[ 1.720993] systemd[1]: Looking at job [email protected]/start conflicted_by=no
[ 1.720996] systemd[1]: Fixing conflicting jobs [email protected]/stop,[email protected]/start by deleting job [email protected]/start
[ 1.720998] systemd[1]: Looking at job gdm.service/start conflicted_by=no
[ 1.721000] systemd[1]: Looking at job gdm.service/stop conflicted_by=no
[ 1.721002] systemd[1]: Fixing conflicting jobs gdm.service/start,gdm.service/stop by deleting job gdm.service/stop
[ 1.721036] systemd[1]: Installed new job graphical.target/start as 1
[ 1.721044] systemd[1]: Installed new job multi-user.target/start as 2
[ 1.721048] systemd[1]: Installed new job basic.target/start as 3
[ 1.721052] systemd[1]: Installed new job sysinit.target/start as 4
[ 1.721056] systemd[1]: Installed new job local-fs.target/start as 5
[ 1.721059] systemd[1]: Installed new job boot.mount/start as 6
[ 1.721063] systemd[1]: Installed new job system.slice/start as 8
[ 1.721067] systemd[1]: Installed new job -.slice/start as 9
[ 1.721070] systemd[1]: Installed new job dev-sda2.device/start as 10
[ 1.721077] systemd[1]: Installed new job [email protected]/start as 11
[ 1.721082] systemd[1]: Installed new job system-systemd\x2dfsck.slice/start as 12
[ 1.721085] systemd[1]: Installed new job home.mount/start as 15
[ 1.721089] systemd[1]: Installed new job dev-mapper-Linux\x2dHome.device/start as 16
[ 1.721093] systemd[1]: Installed new job systemd-fsck@dev-mapper-Linux\x2dHome.service/start as 17
[ 1.721097] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
[ 1.721100] systemd[1]: Installed new job tmp.mount/start as 19
[ 1.721104] systemd[1]: Installed new job systemd-remount-fs.service/start as 20
[ 1.721107] systemd[1]: Installed new job local-fs-pre.target/start as 21
[ 1.721110] systemd[1]: Installed new job boot.automount/start as 22
[ 1.721114] systemd[1]: Installed new job swap.target/start as 23
[ 1.721117] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.swap/start as 24
[ 1.721121] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.device/start as 25
[ 1.721124] systemd[1]: Installed new job systemd-timesyncd.service/start as 26
[ 1.721127] systemd[1]: Installed new job time-sync.target/start as 27
[ 1.721131] systemd[1]: Installed new job ldconfig.service/start as 28
[ 1.721134] systemd[1]: Installed new job sys-kernel-debug.mount/start as 29
[ 1.721137] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 30
[ 1.721140] systemd[1]: Installed new job sys-kernel-config.mount/start as 31
[ 1.721144] systemd[1]: Installed new job systemd-journal-flush.service/start as 32
[ 1.721147] systemd[1]: Installed new job systemd-journald.service/start as 33
[ 1.721150] systemd[1]: Installed new job systemd-journald.socket/start as 34
[ 1.721154] systemd[1]: Installed new job systemd-journald-dev-log.socket/start as 35
[ 1.721157] systemd[1]: Installed new job systemd-sysctl.service/start as 36
[ 1.721160] systemd[1]: Installed new job systemd-firstboot.service/start as 37
[ 1.721164] systemd[1]: Installed new job cryptsetup.target/start as 38
[ 1.721167] systemd[1]: Installed new job lvm2-lvmetad.socket/start as 39
[ 1.721170] systemd[1]: Installed new job kmod-static-nodes.service/start as 40
[ 1.721173] systemd[1]: Installed new job systemd-binfmt.service/start as 41
[ 1.721177] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 42
[ 1.721180] systemd[1]: Installed new job systemd-journal-catalog-update.service/start as 43
[ 1.721184] systemd[1]: Installed new job systemd-udevd.service/start as 44
[ 1.721187] systemd[1]: Installed new job systemd-udevd-control.socket/start as 45
[ 1.721191] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 46
[ 1.721194] systemd[1]: Installed new job systemd-ask-password-console.path/start as 47
[ 1.721197] systemd[1]: Installed new job systemd-random-seed.service/start as 48
[ 1.721200] systemd[1]: Installed new job dev-mqueue.mount/start as 49
[ 1.721204] systemd[1]: Installed new job systemd-modules-load.service/start as 50
[ 1.721207] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 51
[ 1.721211] systemd[1]: Installed new job systemd-tmpfiles-setup-dev.service/start as 52
[ 1.721214] systemd[1]: Installed new job systemd-udev-trigger.service/start as 53
[ 1.721217] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 54
[ 1.721220] systemd[1]: Installed new job systemd-update-utmp.service/start as 55
[ 1.721224] systemd[1]: Installed new job dev-hugepages.mount/start as 56
[ 1.721227] systemd[1]: Installed new job systemd-sysusers.service/start as 57
[ 1.721230] systemd[1]: Installed new job systemd-udev-hwdb-update.service/start as 58
[ 1.721233] systemd[1]: Installed new job systemd-update-done.service/start as 59
[ 1.721237] systemd[1]: Installed new job sockets.target/start as 62
[ 1.721240] systemd[1]: Installed new job acpid.socket/start as 63
[ 1.721244] systemd[1]: Installed new job systemd-shutdownd.socket/start as 64
[ 1.721247] systemd[1]: Installed new job dm-event.socket/start as 65
[ 1.721250] systemd[1]: Installed new job systemd-initctl.socket/start as 66
[ 1.721254] systemd[1]: Installed new job dbus.socket/start as 67
[ 1.721257] systemd[1]: Installed new job timers.target/start as 68
[ 1.721260] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 69
[ 1.721263] systemd[1]: Installed new job paths.target/start as 70
[ 1.721267] systemd[1]: Installed new job slices.target/start as 71
[ 1.721270] systemd[1]: Installed new job acpid.service/start as 72
[ 1.721272] systemd[1]: Installed new job systemd-udev-settle.service/start as 73
[ 1.721276] systemd[1]: Installed new job remote-fs.target/start as 74
[ 1.721279] systemd[1]: Installed new job NetworkManager.service/start as 75
[ 1.721282] systemd[1]: Installed new job network.target/start as 76
[ 1.721286] systemd[1]: Installed new job man-db.timer/start as 77
[ 1.721289] systemd[1]: Installed new job dbus.service/start as 78
[ 1.721292] systemd[1]: Installed new job getty.target/start as 79
[ 1.721295] systemd[1]: Installed new job system-getty.slice/start as 81
[ 1.721299] systemd[1]: Installed new job gdm.serviceSo it times out (taking 3 minutes) then says
[FAILED] Failed to start udev Wait for Complete Device Initialization.
See "systemctl status systemd-udev-settle.service" for details
[DEPEND] Dependency failed for ACPI event daemon
so I ran
systemctl status systemd-udev-settle
with this output:
● systemd-udev-settle.service - udev Wait for Complete Device Initialization
Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
Active: active (exited) since Thu 2014-11-13 11:40:16 EST; 1min 24s ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 583 ExecStart=/usr/bin/udevadm settle (code=exited, status=0/SUCCESS)
Main PID: 583 (code=exited, status=0/SUCCESS)
CGroup: /system.slice/systemd-udev-settle.service
Nov 13 11:40:14 arch-yogi systemd[1]: systemd-udev-settle.service changed failed -> start
Nov 13 11:40:16 arch-yogi systemd[1]: Child 583 belongs to systemd-udev-settle.service
Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=0/SUCCESS
Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service changed start -> exited
Nov 13 11:40:16 arch-yogi systemd[1]: Job systemd-udev-settle.service/start finished, result=done
Nov 13 11:40:16 arch-yogi systemd[1]: Started udev Wait for Complete Device Initialization.
Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: cgroup is empty
and after another
systemd-analyze blame
I get:
2.358s systemd-udev-settle.service
995ms lvm2-pvscan@8:8.service
558ms rtkit-daemon.service
488ms NetworkManager.service
458ms udisks2.service
341ms systemd-udev-trigger.service
341ms systemd-binfmt.service
319ms systemd-tmpfiles-setup-dev.service
315ms systemd-random-seed.service
301ms systemd-journald.service
299ms proc-sys-fs-binfmt_misc.mount
166ms systemd-udevd.service
133ms [email protected]
108ms systemd-journal-flush.service
98ms systemd-logind.service
90ms systemd-timesyncd.service
80ms bluetooth.service
65ms [email protected]
47ms polkit.service
37ms accounts-daemon.service
28ms wpa_supplicant.service
26ms systemd-sysctl.service
25ms colord.service
23ms systemd-fsck@dev-mapper-Linux\x2dHome.service
23ms [email protected]
22ms [email protected]
21ms [email protected]
19ms boot.mount
18ms upower.service
17ms avahi-daemon.service
14ms systemd-remount-fs.service
13ms gdm.service
11ms tmp.mount
11ms systemd-vconsole-setup.service
10ms sys-kernel-debug.mount
9ms dev-mapper-Linux\x2dSwap.swap
8ms kmod-static-nodes.service
6ms systemd-tmpfiles-setup.service
5ms systemd-user-sessions.service
5ms dev-mqueue.mount
4ms systemd-update-utmp.service
3ms home.mount
3ms sys-kernel-config.mount
3ms sys-fs-fuse-connections.mount
3ms systemd-backlight@backlight:intel_backlight.service
2ms dev-hugepages.mount
systemd-analyze gets it right though:
Startup finished in 2.538s (firmware) + 62ms (loader) + 2.238s (kernel) + 3min 3.161s (userspace) = 3min 8.001s
What can I do? -
Arch won't boot, FS not detected, Kernel Panic.
Ok so here is the situation. I have arch linux installed on sda1, which is a sata drive, samsung. Seems lately I been having problems getting arch to boot because it doesn't know what type filesystem my root device has. It goes on and tells me that I can use the kernel parameter rootfstype= to solve the issue, but yet when I try this, it does nothing. I stop getting the error, about unknown FS type, but arch still won't boot. Init fails...
I have tried everything on these forums to fix the problem and not one thing in general has solved the issue. What seems to be most consistent about this problem, is it takes me at least 20 - 30 times of rebooting before it will finally go through and boot. But, even then this is not foolproof. Last night I tried at least 30+ times of rebooting, powering off and still it would not boot.
So after reading the forums some more I found an article somewhat related to my problem and it was suggested that I add my root FS type as a module and then remove the filesystem hook in mkinitcpio.conf. I tried this approach and at the same time downgraded to 2.6.24.2-1 kernel26 so mkinitcpio would generate the new image. Then I rebooted and arch loaded just fine. So then I rebooted and again, unknown fs type on root device error.
So I retraced my steps and tried the same process again, only this time when I rebooted I got same problem. So as it seems, nothing I did to mkinitcpio.conf did anything to alleviate my problem.
As of right now, I managed to get the fallback image to work(but fallback does not load all the time, just this last time I tried it it worked), but I am scared to death to turn off my machine because I know it's not gonna reboot without a lot of hassle.
So can anyone help me diagnose this problem? What can I do to get the kernel to boot and mount the root device with ext3 and pass init on boot up? I am completely lost when it comes to this...
here is my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="ext3 pata_amd ata_generic sata_nv"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
# This is identical to the above, except the old ide subsystem is
# used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
# This setup assembles an pata raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev pata raid encrypt filesystems"
# This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata sata"
here is my fallback.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
# BusLogic is added to support VMWARE arch booting in fallback image
MODULES="BusLogic"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
#BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev ide scsi sata usb filesystems"
# This setup assembles an ide raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev ide filesystems raid encrypt"
# This setup loads an LVM volume group on a usb device.
# HOOKS="base udev usb filesystems lvm"
HOOKS="base udev ide pata scsi sata usbinput raid filesystems"
modules I need
sudo mkinitcpio -M
Password:
Modules autodetected:
ata_generic
libata
pata_acpi
pata_amd
sata_nv
cdrom
ide-core
amd74xx
generic
forcedeth
sd_mod
sr_mod
usbcore
ehci-hcd
ohci-hcd
jbd
ext3
Last edited by jacko (2008-04-15 19:53:35)I had a similar issue (I think, can you post the exact error the kernel panics with to check?) and it seemed grub or the kernel had difficulties with finding my root device which was specified as a device node in /dev. The solution for me was to change the root parameter in my kernel line in grub's menu.lst to root=/dev/disk/by-label/<label>, I'm sure UUID and such will work fine too. After doing that I haven't encountered a single such kernel panic. More info about persistent device naming can be found here.
-
Extremely slow boot time on fresh install (Cinnamon + GDM)
Hi,
I have a fresh installation of Arch with Cinnamon + GDM taking about 2 minutes and 30 seconds (observed manually) from Grub menu to loading of desktop in usable condition.
It's installed on external USB drive. Although the hardware is old but rebooted within 15 seconds in VM on internal HD drive with same Cinnamon and SDDM.
Details are:
#1. Hardware info:
AMD Athlon 64 X2 Dual Core Processor 4800+ x 2
Memory 2.7 GB
Hard drive 149.4 GB
GPU : nVidia Corp; GT 218 [GeForce 210]
USB wi-fi card
Arch vanilla kernel: 3.17.2-1
Problems:
a) Delay during loading of kernel modules,
b) Extreme delay in loading of display manager for login, and
c) Delay in loading of desktop.
I followed these guides:
Maximizing performance
Improve boot performance
Did not find any relevant tip to fix problems.
#2. systemd-analyze
Startup finished in 16.354s (kernel) + 10.182s (userspace) = 26.536s
It's wrong.
#3. systemd-analyze blame
4.151s wpa_supplicant.service
4.048s NetworkManager.service
1.623s colord.service
1.479s accounts-daemon.service
912ms systemd-logind.service
886ms gdm.service
679ms polkit.service
571ms [email protected]
548ms dev-hugepages.mount
547ms sys-kernel-debug.mount
524ms tmp.mount
512ms udisks2.service
475ms sys-kernel-config.mount
448ms dev-mqueue.mount
435ms systemd-remount-fs.service
423ms systemd-udev-trigger.service
409ms systemd-vconsole-setup.service
349ms [email protected]
330ms systemd-sysctl.service
258ms kmod-static-nodes.service
254ms systemd-tmpfiles-setup-dev.service
242ms upower.service
240ms systemd-journal-flush.service
218ms systemd-tmpfiles-setup.service
200ms rtkit-daemon.service
150ms systemd-random-seed.service
129ms home.mount
108ms systemd-user-sessions.service
94ms dev-sdb3.swap
88ms [email protected]
64ms systemd-update-utmp.service
60ms systemd-tmpfiles-clean.service
39ms [email protected]
27ms systemd-udevd.service
4ms sys-fs-fuse-connections.mount
Seems no problem.
#4. dmesg
Complete : http://pastebin.com/w7sXtuKh
Extract : Based on what I think adds delay
[ 22.277994] systemd-journald[138]: Received request to flush runtime journal from PID 1
[ 26.674187] r8169 0000:02:0f.0 enp2s15: link down
[ 26.674207] r8169 0000:02:0f.0 enp2s15: link down
[ 26.674267] IPv6: ADDRCONF(NETDEV_UP): enp2s15: link is not ready
[ 26.700183] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 26.729912] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 27.117488] IPv6: ADDRCONF(NETDEV_UP): wlp0s19f5u3: link is not ready
[ 53.360188] nvidia 0000:01:00.0: irq 25 for MSI/MSI-X
[ 53.951157] NVRM: Your system is not currently configured to drive a VGA console
[ 53.951164] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 53.951167] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 53.951170] NVRM: drivers including, but not limited to, vesafb, may result in
[ 53.951172] NVRM: corruption and stability problems, and is not supported.
[ 58.436865] wlp0s19f5u3: authenticate with 00:1f:fb:39:4c:24
[ 58.467542] wlp0s19f5u3: send auth to 00:1f:fb:39:4c:24 (try 1/3)
[ 58.469250] wlp0s19f5u3: authenticated
[ 58.469512] rt2800usb 2-3:1.0 wlp0s19f5u3: disabling HT/VHT due to WEP/TKIP use
[ 58.470040] wlp0s19f5u3: associate with 00:1f:fb:39:4c:24 (try 1/3)
[ 58.478853] wlp0s19f5u3: RX AssocResp from 00:1f:fb:39:4c:24 (capab=0x411 status=0 aid=3)
[ 58.485469] wlp0s19f5u3: associated
[ 58.485510] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s19f5u3: link becomes ready
[ 58.485555] cfg80211: Calling CRDA to update world regulatory domain
[ 70.688882] fuse init (API version 7.23)
[ 283.405686] cfg80211: Calling CRDA to update world regulatory domain
#5. Important observation:
hdparm -t reports 13.54 mb /sec reads for the external drive I am using for this installation. I don't face lag or slowness after boot including another distro installed on this drive had this problem.
Please help in further analyzing and fixing this problem.
Thanks!How fast does it boot to a tty? Disable gdm and boot to a tty. See if that is any faster than starting gdm. Gdm takes a while to start up if I run it on my computer and I have an SSD. But it will add several seconds to my boot time which from systemd-analyze is 9 seconds.
So, boot to a tty and use startx to start the session and see if it's any faster. 13MB/s seems like a pretty tight bottleneck for starting big applications like gdm and a desktop environment. I run a pretty simple openbox setup as my environment and it only uses 150 MB of memory after I startx. But if I could only load 13 MB /s from memory it would add another 11 seconds to the time it took me to startx.
So see how fast you can boot, and then see how fast you can load your desktop using startx. When I booted an install media of arch on an old computer with usb2 it took about 10 minutes to get everything going. -
I have a very long boot time with my Arch.
Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper. Does anyone has a suggestion how to fix that?
Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
systemd-analzye blame shows
18722ms colord.service
16584ms home.mount
12666ms plymouth-start.service
11550ms boot.mount
11350ms var.mount
7604ms NetworkManager.service
7261ms chrony.service
1985ms wpa_supplicant.service
1606ms systemd-modules-load.service
1350ms systemd-tmpfiles-setup.service
1202ms dev-hugepages.mount
1189ms dev-mqueue.mount
1080ms sys-kernel-debug.mount
987ms systemd-udev-trigger.service
946ms systemd-udevd.service
879ms systemd-vconsole-setup.service
495ms bluetooth.service
376ms polkit.service
358ms crashplan.service
348ms systemd-readahead-replay.service
346ms lm_sensors.service
337ms upower.service
331ms systemd-readahead-collect.service
311ms systemd-logind.service
289ms lvmetad.service
286ms systemd-binfmt.service
242ms cpupower.service
206ms systemd-remount-fs.service
174ms gdm.service
140ms proc-sys-fs-binfmt_misc.mount
94ms udisks2.service
93ms rtkit-daemon.service
87ms rc-local.service
86ms systemd-user-sessions.service
53ms systemd-sysctl.service
24ms accounts-daemon.service
2ms tmp.mount
1ms sys-fs-fuse-connections.mount
Dmesg shows:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-D3FFF write-through
[ 0.000000] D4000-D7FFF uncachable
[ 0.000000] D8000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FE0000000 write-back
[ 0.000000] 6 base 220000000 mask FF0000000 write-back
[ 0.000000] 7 base 230000000 mask FF8000000 write-back
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
[ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
[ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
[ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
[ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000c779bfc0 00040
[ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
[ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
[ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x237ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
[ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
[ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
[ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
[ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
[ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
[ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
[ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
[ 0.000000] On node 0 totalpages: 2094193
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
[ 0.000000] Normal zone: 19968 pages used for memmap
[ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
[ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
[ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
[ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
[ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
[ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
[ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
[ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
[ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
[ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
[ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1596.068 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000044] Security Framework initialized
[ 0.000048] AppArmor: AppArmor disabled by boot time parameter
[ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003923] Mount-cache hash table entries: 256
[ 0.004173] Initializing cgroup subsys cpuacct
[ 0.004176] Initializing cgroup subsys memory
[ 0.004184] Initializing cgroup subsys devices
[ 0.004186] Initializing cgroup subsys freezer
[ 0.004188] Initializing cgroup subsys net_cls
[ 0.004189] Initializing cgroup subsys blkio
[ 0.004216] CPU: Physical Processor ID: 0
[ 0.004217] CPU: Processor Core ID: 0
[ 0.004222] mce: CPU supports 9 MCE banks
[ 0.004234] CPU0: Thermal monitoring enabled (TM1)
[ 0.004241] process: using mwait in idle threads
[ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x6
[ 0.005569] ACPI: Core revision 20120711
[ 0.021739] ftrace: allocating 18347 entries in 72 pages
[ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.172661] ... version: 3
[ 0.172662] ... bit width: 48
[ 0.172663] ... generic registers: 4
[ 0.172665] ... value mask: 0000ffffffffffff
[ 0.172666] ... max period: 000000007fffffff
[ 0.172667] ... fixed-purpose events: 3
[ 0.172669] ... event mask: 000000070000000f
[ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.379170] Brought up 8 CPUs
[ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
[ 0.385494] devtmpfs: initialized
[ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
[ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
[ 0.388860] NET: Registered protocol family 16
[ 0.389041] ACPI: bus type pci registered
[ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.432597] PCI: Using configuration type 1 for base access
[ 0.433425] bio: create slab <bio-0> at 0
[ 0.433488] ACPI: Added _OSI(Module Device)
[ 0.433490] ACPI: Added _OSI(Processor Device)
[ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.435530] ACPI: EC: Look up EC in DSDT
[ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.444142] ACPI: Dynamic OEM Table Load:
[ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.444806] ACPI: Dynamic OEM Table Load:
[ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.445749] ACPI: Dynamic OEM Table Load:
[ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.446432] ACPI: Dynamic OEM Table Load:
[ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.448062] ACPI: Interpreter enabled
[ 0.448066] ACPI: (supports S0 S3 S4 S5)
[ 0.448089] ACPI: Using IOAPIC for interrupt routing
[ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.455392] ACPI: Power Resource [FN00] (off)
[ 0.455494] ACPI: Power Resource [FN01] (off)
[ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.456339] ACPI: No dock devices found.
[ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.456813] \_SB_.PCI0:_OSC invalid UUID
[ 0.456815] _OSC request data:1 8 1f
[ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.457600] PCI host bridge to bus 0000:00
[ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
[ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
[ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
[ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
[ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
[ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
[ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
[ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
[ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
[ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
[ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
[ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
[ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
[ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.459642] pci 0000:02:00.0: supports D1 D2
[ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
[ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[ 0.459749] pci 0000:02:00.1: supports D1 D2
[ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
[ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
[ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
[ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
[ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
[ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
[ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
[ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
[ 0.470612] pci 0000:09:00.0: supports D1 D2
[ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
[ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
[ 0.470817] pci 0000:09:00.1: supports D1 D2
[ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
[ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
[ 0.471016] pci 0000:09:00.2: supports D1 D2
[ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
[ 0.471214] pci 0000:09:00.3: supports D1 D2
[ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
[ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
[ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
[ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
[ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
[ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
[ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.480435] \_SB_.PCI0:_OSC invalid UUID
[ 0.480437] _OSC request data:1 1f 1f
[ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.487507] PCI host bridge to bus 0000:ff
[ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
[ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.488983] vgaarb: loaded
[ 0.488985] vgaarb: bridge control possible 0000:02:00.0
[ 0.489035] PCI: Using ACPI for IRQ routing
[ 0.495825] PCI: pci_cache_line_size set to 64 bytes
[ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
[ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
[ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
[ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
[ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
[ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
[ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
[ 0.496267] NetLabel: Initializing
[ 0.496269] NetLabel: domain hash size = 128
[ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.496283] NetLabel: unlabeled traffic allowed by default
[ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.499146] hpet: hpet2 irq 40 for MSI
[ 0.502434] hpet: hpet3 irq 41 for MSI
[ 0.505694] hpet: hpet4 irq 42 for MSI
[ 0.505793] hpet: hpet5 irq 43 for MSI
[ 0.509214] hpet: hpet6 irq 44 for MSI
[ 0.522618] Switching to clocksource hpet
[ 0.529334] pnp: PnP ACPI init
[ 0.529354] ACPI: bus type pnp registered
[ 0.529782] pnp 00:00: [bus 00-fe]
[ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
[ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.529952] pnp 00:01: [io 0x0000-0x001f]
[ 0.529954] pnp 00:01: [io 0x0081-0x0091]
[ 0.529957] pnp 00:01: [io 0x0093-0x009f]
[ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
[ 0.529961] pnp 00:01: [dma 4]
[ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.530116] pnp 00:03: [irq 0 disabled]
[ 0.530125] pnp 00:03: [irq 8]
[ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.530174] pnp 00:04: [io 0x00f0]
[ 0.530181] pnp 00:04: [irq 13]
[ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.530221] pnp 00:05: [io 0x002e-0x002f]
[ 0.530223] pnp 00:05: [io 0x004e-0x004f]
[ 0.530225] pnp 00:05: [io 0x0061]
[ 0.530227] pnp 00:05: [io 0x0063]
[ 0.530229] pnp 00:05: [io 0x0065]
[ 0.530231] pnp 00:05: [io 0x0067]
[ 0.530234] pnp 00:05: [io 0x0068]
[ 0.530236] pnp 00:05: [io 0x006c]
[ 0.530238] pnp 00:05: [io 0x0070]
[ 0.530240] pnp 00:05: [io 0x0080]
[ 0.530242] pnp 00:05: [io 0x0092]
[ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.530246] pnp 00:05: [io 0x0680-0x069f]
[ 0.530249] pnp 00:05: [io 0x0500-0x050f]
[ 0.530251] pnp 00:05: [io 0xffff]
[ 0.530253] pnp 00:05: [io 0xffff]
[ 0.530255] pnp 00:05: [io 0x0400-0x047f]
[ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
[ 0.530259] pnp 00:05: [io 0x164e-0x164f]
[ 0.530262] pnp 00:05: [io 0xfe00]
[ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.530336] system 00:05: [io 0xffff] has been reserved
[ 0.530339] system 00:05: [io 0xffff] has been reserved
[ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.530352] system 00:05: [io 0xfe00] has been reserved
[ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530374] pnp 00:06: [io 0x0300-0x0307]
[ 0.530381] pnp 00:06: [irq 10]
[ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
[ 0.530445] pnp 00:07: [io 0x0070-0x0077]
[ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.530488] pnp 00:08: [io 0x0060]
[ 0.530492] pnp 00:08: [io 0x0064]
[ 0.530499] pnp 00:08: [irq 1]
[ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.530539] pnp 00:09: [irq 12]
[ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
[ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
[ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
[ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
[ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
[ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.532133] pnp 00:0b: [bus ff]
[ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.532211] pnp: PnP ACPI: found 12 devices
[ 0.532212] ACPI: ACPI bus type pnp unregistered
[ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
[ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
[ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
[ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
[ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
[ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
[ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
[ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
[ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
[ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
[ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
[ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.539501] NET: Registered protocol family 2
[ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.544194] TCP: reno registered
[ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.544454] NET: Registered protocol family 1
[ 0.544593] pci 0000:02:00.0: Boot video device
[ 0.544817] PCI: CLS 64 bytes, default 64
[ 0.544861] Unpacking initramfs...
[ 0.665886] Freeing initrd memory: 4640k freed
[ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
[ 0.666654] Simple Boot Flag at 0x36 set to 0x80
[ 0.667182] audit: initializing netlink socket (disabled)
[ 0.667193] type=2000 audit(1352749565.703:1): initialized
[ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.685360] VFS: Disk quotas dquot_6.5.2
[ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.685575] msgmni has been set to 15952
[ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.685830] io scheduler noop registered
[ 0.685832] io scheduler deadline registered
[ 0.685897] io scheduler cfq registered (default)
[ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.686339] vesafb: scrolling: redraw
[ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
[ 0.886729] Console: switching to colour frame buffer device 160x64
[ 1.086123] fb0: VESA VGA frame buffer device
[ 1.086134] intel_idle: MWAIT substates: 0x1120
[ 1.086145] intel_idle: v0.4 model 0x1E
[ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
[ 1.086221] GHES: HEST is not enabled!
[ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.086787] Linux agpgart interface v0.103
[ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.097348] mousedev: PS/2 mouse device common for all mice
[ 1.097573] rtc_cmos 00:07: RTC can wake from S4
[ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.098264] cpuidle: using governor ladder
[ 1.098473] cpuidle: using governor menu
[ 1.098603] drop_monitor: Initializing network drop monitor service
[ 1.098697] TCP: cubic registered
[ 1.098819] NET: Registered protocol family 10
[ 1.099011] NET: Registered protocol family 17
[ 1.099028] Key type dns_resolver registered
[ 1.099438] PM: Hibernation image not present or could not be loaded.
[ 1.099447] registered taskstats version 1
[ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
[ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106355] Freeing unused kernel memory: 768k freed
[ 1.106522] Write protecting the kernel read-only data: 8192k
[ 1.116385] Freeing unused kernel memory: 1408k freed
[ 1.117994] Freeing unused kernel memory: 568k freed
[ 1.134497] systemd-udevd[78]: starting version 195
[ 1.180869] ACPI: bus type usb registered
[ 1.180984] usbcore: registered new interface driver usbfs
[ 1.181051] usbcore: registered new interface driver hub
[ 1.181311] usbcore: registered new device driver usb
[ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
[ 1.187791] SCSI subsystem initialized
[ 1.189604] ACPI: bus type scsi registered
[ 1.189681] libata version 3.00 loaded.
[ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.195917] hub 1-0:1.0: USB hub found
[ 1.195922] hub 1-0:1.0: 3 ports detected
[ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
[ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.209225] hub 2-0:1.0: USB hub found
[ 1.209230] hub 2-0:1.0: 3 ports detected
[ 1.209367] ahci 0000:00:1f.2: version 3.0
[ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.209548] ahci: SSS flag set, parallel bus scan disabled
[ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
[ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.223416] scsi0 : ahci
[ 1.223797] scsi1 : ahci
[ 1.224147] scsi2 : ahci
[ 1.224500] scsi3 : ahci
[ 1.224856] scsi4 : ahci
[ 1.225221] scsi5 : ahci
[ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
[ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
[ 1.225365] ata3: DUMMY
[ 1.225367] ata4: DUMMY
[ 1.225369] ata5: DUMMY
[ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
[ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
[ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.549967] ata1.00: configured for UDMA/133
[ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
[ 1.626090] hub 1-1:1.0: USB hub found
[ 1.626247] hub 1-1:1.0: 6 ports detected
[ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.668460] Switching to clocksource tsc
[ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.856178] hub 2-1:1.0: USB hub found
[ 1.856346] hub 2-1:1.0: 8 ports detected
[ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
[ 1.880987] ata2.00: applying bridge limits
[ 1.894279] ata2.00: configured for UDMA/100
[ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
[ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
[ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264902] sda: sda1 sda2
[ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.286592] usbcore: registered new interface driver usbhid
[ 2.286606] usbhid: USB HID core driver
[ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
[ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
[ 2.415244] device-mapper: uevent: version 1.0.3
[ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 2.430414] hub 2-1.2:1.0: USB hub found
[ 2.430750] hub 2-1.2:1.0: 4 ports detected
[ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
[ 2.583779] hub 2-1.6:1.0: USB hub found
[ 2.583940] hub 2-1.6:1.0: 3 ports detected
[ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
[ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
[ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
[ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
[ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
[ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
[ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
[ 824.543880] Btrfs loaded
[ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
[ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
[ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
[ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 826.913723] systemd[1]: Set hostname to <clawfinger>.
[ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
[ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
[ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
[ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
[ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
[ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
[ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
[ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 829.571319] systemd[1]: Starting Login Prompts.
[ 829.571328] systemd[1]: Reached target Login Prompts.
[ 829.571337] systemd[1]: Starting Remote File Systems.
[ 829.571345] systemd[1]: Reached target Remote File Systems.
[ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 829.571362] systemd[1]: Starting Syslog Socket.
[ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
[ 829.574007] systemd[1]: Starting Arch Daemons.
[ 829.574014] systemd[1]: Reached target Arch Daemons.
[ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
[ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
[ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
[ 829.574218] systemd[1]: Starting udev Kernel Socket.
[ 829.574239] systemd[1]: Listening on udev Kernel Socket.
[ 829.574284] systemd[1]: Starting udev Control Socket.
[ 829.574307] systemd[1]: Listening on udev Control Socket.
[ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 829.574419] systemd[1]: Starting Encrypted Volumes.
[ 829.574426] systemd[1]: Reached target Encrypted Volumes.
[ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
[ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
[ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
[ 829.574467] systemd[1]: Starting Journal Socket.
[ 829.574507] systemd[1]: Listening on Journal Socket.
[ 829.574529] systemd[1]: Mounting Huge Pages File System...
[ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
[ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
[ 829.594776] systemd[1]: Mounting Debug File System...
[ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
[ 829.614769] systemd[1]: Starting Journal Service...
[ 829.647758] systemd[1]: Started Journal Service.
[ 829.647819] systemd[1]: Starting Syslog.
[ 829.647843] systemd[1]: Reached target Syslog.
[ 829.647879] systemd[1]: Starting home.automount.
[ 829.901808] systemd[1]: Set up automount home.automount.
[ 830.553864] systemd-udevd[249]: starting version 195
[ 831.070954] ACPI: Requesting acpi_cpufreq
[ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 831.456019] ACPI: Power Button [PWRB]
[ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 831.456060] ACPI: Sleep Button [SLPB]
[ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 831.457156] ACPI: Lid Switch [LID0]
[ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 831.457206] ACPI: Power Button [PWRF]
[ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 831.457548] AMD IOMMUv2 functionality not available on this system
[ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 831.615336] Disabling lock debugging due to kernel taint
[ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
[ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
[ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 831.620722] <6>[fglrx] Kernel PAT support is enabled
[ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
[ 831.621578] ACPI: Fan [FAN0] (off)
[ 831.621623] ACPI: Fan [FAN1] (off)
[ 831.631874] vboxdrv: Found 8 processor cores.
[ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
[ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
[ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
[ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 832.315135] acpi device:03: registered as cooling_device10
[ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
[ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
[ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
[ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
[ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
[ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
[ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 833.265118] wmi: Mapper loaded
[ 833.267255] sdhci: Secure Digital Host Controller Interface driver
[ 833.267258] sdhci: Copyright(c) Pierre Ossman
[ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 833.513095] Registered led device: mmc0::
[ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
[ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
[ 833.847354] EDAC MC: Ver: 3.0.0
[ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
[ 834.096455] ite_cir: TX-capable: 1
[ 834.096456] ite_cir: Sample period (ns): 8680
[ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
[ 834.096458] ite_cir: TX duty cycle (%): 33
[ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
[ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
[ 834.275945] iTCO_vendor_support: vendor-support=0
[ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
[ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
[ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
[ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
[ 835.152252] Registered IR keymap rc-rc6-mce
[ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
[ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[ 835.152504] ite_cir: driver has been successfully lMy disk seems also fine
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD6400BEVT-75A0RT0
Serial Number: WD-WX91C8077575
LU WWN Device Id: 5 0014ee 600865d25
Firmware Version: 01.01A01
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Dec 20 21:36:56 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 248) Self-test routine in progress...
80% of test remaining.
Total time to complete Offline
data collection: (16380) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 190) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 90% 4329 -
# 2 Extended offline Completed without error 00% 4329 -
# 3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. -
[solved] Long boot time because of NetworkManager.service
Hello. It seems that my ASUS N56V latptop takes a long time to boot. systemd-analyze reports this:
Startup finished in 742ms (kernel) + 3.094s (initrd) + 23.838s (userspace) = 27.675s
└──[4]──╼ systemd-analyze blame
12.083s NetworkManager.service
11.247s accounts-daemon.service
1.137s home-sergio-Disco_Duro.mount
735ms systemd-vconsole-setup.service
710ms systemd-udev-trigger.service
631ms systemd-tmpfiles-setup.service
630ms dev-hugepages.mount
628ms lm_sensors.service
626ms systemd-logind.service
515ms dev-mqueue.mount
515ms sys-kernel-debug.mount
440ms systemd-tmpfiles-setup-dev.service
432ms ufw.service
380ms dev-sda5.swap
365ms [email protected]
356ms gdm.service
356ms systemd-udevd.service
356ms systemd-binfmt.service
353ms systemd-sysctl.service
341ms systemd-readahead-replay.service
340ms systemd-readahead-collect.service
293ms tmp.mount
274ms colord.service
267ms alsa-restore.service
266ms cpupower.service
259ms upower.service
226ms kmod-static-nodes.service
79ms systemd-random-seed.service
66ms proc-sys-fs-binfmt_misc.mount
60ms systemd-remount-fs.service
59ms [email protected]
58ms udisks2.service
44ms [email protected]
30ms sys-kernel-config.mount
10ms polkit.service
6ms systemd-journal-flush.service
5ms [email protected]
4ms systemd-update-utmp.service
4ms systemd-backlight@leds:asus::kbd_backlight.service
2ms wpa_supplicant.service
2ms rtkit-daemon.service
2ms systemd-backlight@backlight:intel_backlight.service
2ms [email protected]
1ms [email protected]
1ms systemd-user-sessions.service
1ms systemd-readahead-done.service
1ms sys-fs-fuse-connections.mount
└──[14]──╼ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @23.838s
└─multi-user.target @23.838s
└─NetworkManager.service @11.755s +12.083s
└─basic.target @11.753s
└─timers.target @11.753s
└─systemd-tmpfiles-clean.timer @11.752s
└─sysinit.target @11.719s
└─systemd-update-utmp.service @11.712s +4ms
└─systemd-tmpfiles-setup.service @11.079s +631ms
└─local-fs.target @11.076s
└─home-sergio-Disco_Duro.mount @9.938s +1.137s
└─[email protected] @9.498s +365ms
└─dev-sda6.device @9.497s
And dmesg reports this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ad7a8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad7a9000-0x00000000adda9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000addaa000-0x00000000addacfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addad000-0x00000000addc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000addc3000-0x00000000addc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addc9000-0x00000000addcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000addcb000-0x00000000addd4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addd5000-0x00000000adf2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adf2c000-0x00000000adf2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adf30000-0x00000000adf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adf7a000-0x00000000adf9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfa0000-0x00000000adfa2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfa3000-0x00000000adfa4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfa5000-0x00000000adfbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfbc000-0x00000000adfc1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfc2000-0x00000000adfc9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfca000-0x00000000adfcafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfcb000-0x00000000adfd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfda000-0x00000000adfdafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfdb000-0x00000000adfe5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adfe6000-0x00000000adfeafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adfeb000-0x00000000ae016fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae017000-0x00000000ae017fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae018000-0x00000000ae027fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae028000-0x00000000ae04efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae04f000-0x00000000ae061fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae062000-0x00000000ae062fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae063000-0x00000000ae063fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae064000-0x00000000ae065fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae066000-0x00000000ae066fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae067000-0x00000000ae06bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae06c000-0x00000000ae082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae083000-0x00000000ae626fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae627000-0x00000000ae8a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae8a7000-0x00000000ae8abfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ae8ac000-0x00000000ae8acfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae8ad000-0x00000000ae8effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae8f0000-0x00000000aecfefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aecff000-0x00000000aeff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VB/N56VB, BIOS N56VB.202 01/21/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0AFC00000 mask FFFC00000 uncachable
[ 0.000000] 6 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] 7 base 1AF800000 mask FFF800000 uncachable
[ 0.000000] 8 base 1AF400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 1AF200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xafc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1aeffffff]
[ 0.000000] [mem 0x1ac000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[ 0.000000] [mem 0x180000000-0x1abffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xad7a8fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xad5fffff] page 2M
[ 0.000000] [mem 0xad600000-0xad7a8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddad000-0xaddc2fff]
[ 0.000000] [mem 0xaddad000-0xaddc2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddc9000-0xaddcafff]
[ 0.000000] [mem 0xaddc9000-0xaddcafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaddd5000-0xadf2bfff]
[ 0.000000] [mem 0xaddd5000-0xadf2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadf30000-0xadf79fff]
[ 0.000000] [mem 0xadf30000-0xadf79fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfa0000-0xadfa2fff]
[ 0.000000] [mem 0xadfa0000-0xadfa2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfa5000-0xadfbbfff]
[ 0.000000] [mem 0xadfa5000-0xadfbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfc2000-0xadfc9fff]
[ 0.000000] [mem 0xadfc2000-0xadfc9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfcb000-0xadfd9fff]
[ 0.000000] [mem 0xadfcb000-0xadfd9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfdb000-0xadfe5fff]
[ 0.000000] [mem 0xadfdb000-0xadfe5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xadfeb000-0xae016fff]
[ 0.000000] [mem 0xadfeb000-0xae016fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae018000-0xae027fff]
[ 0.000000] [mem 0xae018000-0xae027fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae04f000-0xae061fff]
[ 0.000000] [mem 0xae04f000-0xae061fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae063000-0xae063fff]
[ 0.000000] [mem 0xae063000-0xae063fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae066000-0xae066fff]
[ 0.000000] [mem 0xae066000-0xae066fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae06c000-0xae082fff]
[ 0.000000] [mem 0xae06c000-0xae082fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae8ac000-0xae8acfff]
[ 0.000000] [mem 0xae8ac000-0xae8acfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae8f0000-0xaecfefff]
[ 0.000000] [mem 0xae8f0000-0xae9fffff] page 4k
[ 0.000000] [mem 0xaea00000-0xaebfffff] page 2M
[ 0.000000] [mem 0xaec00000-0xaecfefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] [mem 0xaeff4000-0xaeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3757a000-0x37ab4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000AE879078 00007C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AE88CAE0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000AE879188 013957 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000AE8A4080 000040
[ 0.000000] ACPI: APIC 0x00000000AE88CBF0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AE88CC68 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000AE88CCB0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000AE88CD78 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AE88CDB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000AE88CDF0 000632 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000AE88D428 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000AE88D8C8 0009D0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000AE88E298 000B18 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MSDM 0x00000000AE626E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1af1fffff]
[ 0.000000] NODE_DATA [mem 0x1af1f1000-0x1af1f5fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9000000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xad7a8fff]
[ 0.000000] node 0: [mem 0xaddad000-0xaddc2fff]
[ 0.000000] node 0: [mem 0xaddc9000-0xaddcafff]
[ 0.000000] node 0: [mem 0xaddd5000-0xadf2bfff]
[ 0.000000] node 0: [mem 0xadf30000-0xadf79fff]
[ 0.000000] node 0: [mem 0xadfa0000-0xadfa2fff]
[ 0.000000] node 0: [mem 0xadfa5000-0xadfbbfff]
[ 0.000000] node 0: [mem 0xadfc2000-0xadfc9fff]
[ 0.000000] node 0: [mem 0xadfcb000-0xadfd9fff]
[ 0.000000] node 0: [mem 0xadfdb000-0xadfe5fff]
[ 0.000000] node 0: [mem 0xadfeb000-0xae016fff]
[ 0.000000] node 0: [mem 0xae018000-0xae027fff]
[ 0.000000] node 0: [mem 0xae04f000-0xae061fff]
[ 0.000000] node 0: [mem 0xae063000-0xae063fff]
[ 0.000000] node 0: [mem 0xae066000-0xae066fff]
[ 0.000000] node 0: [mem 0xae06c000-0xae082fff]
[ 0.000000] node 0: [mem 0xae8ac000-0xae8acfff]
[ 0.000000] node 0: [mem 0xae8f0000-0xaecfefff]
[ 0.000000] node 0: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1af1fffff]
[ 0.000000] On node 0 totalpages: 1428925
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11057 pages used for memmap
[ 0.000000] DMA32 zone: 707617 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xafe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad7a9000-0xadda9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddaa000-0xaddacfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddc3000-0xaddc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaddcb000-0xaddd4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadf2c000-0xadf2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadf7a000-0xadf9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfa3000-0xadfa4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfbc000-0xadfc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfca000-0xadfcafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfda000-0xadfdafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xadfe6000-0xadfeafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae017000-0xae017fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae028000-0xae04efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae062000-0xae062fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae064000-0xae065fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae067000-0xae06bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae083000-0xae626fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae627000-0xae8a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8a7000-0xae8abfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8ad000-0xae8effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaecff000-0xaeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xafbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801aee00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1406575
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5541880K/5715700K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 173820K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 23068672 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.142 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.46 BogoMIPS (lpj=8647140)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20140424
[ 0.013454] ACPI: All ACPI Tables successfully acquired
[ 0.015248] Security Framework initialized
[ 0.015253] Yama: becoming mindful.
[ 0.015698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017594] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018433] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018442] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018639] Initializing cgroup subsys memory
[ 0.018655] Initializing cgroup subsys devices
[ 0.018661] Initializing cgroup subsys freezer
[ 0.018663] Initializing cgroup subsys net_cls
[ 0.018666] Initializing cgroup subsys blkio
[ 0.018687] CPU: Physical Processor ID: 0
[ 0.018688] CPU: Processor Core ID: 0
[ 0.018693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.019034] mce: CPU supports 7 MCE banks
[ 0.019044] CPU0: Thermal monitoring enabled (TM1)
[ 0.019053] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.019156] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.020028] ftrace: allocating 20434 entries in 80 pages
[ 0.029301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062327] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
[ 0.062334] TSC deadline timer enabled
[ 0.062356] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.062374] ... version: 3
[ 0.062375] ... bit width: 48
[ 0.062376] ... generic registers: 4
[ 0.062377] ... value mask: 0000ffffffffffff
[ 0.062377] ... max period: 0000ffffffffffff
[ 0.062378] ... fixed-purpose events: 3
[ 0.062379] ... event mask: 000000070000000f
[ 0.089127] x86: Booting SMP configuration:
[ 0.089129] .... node #0, CPUs: #1
[ 0.102615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.109323] #2 #3
[ 0.143069] x86: Booted up 1 node, 4 CPUs
[ 0.143072] smpboot: Total of 4 processors activated (20761.85 BogoMIPS)
[ 0.146151] devtmpfs: initialized
[ 0.148360] PM: Registering ACPI NVS region [mem 0xad7a9000-0xadda9fff] (6295552 bytes)
[ 0.148429] PM: Registering ACPI NVS region [mem 0xae627000-0xae8a6fff] (2621440 bytes)
[ 0.148457] PM: Registering ACPI NVS region [mem 0xae8ad000-0xae8effff] (274432 bytes)
[ 0.149179] pinctrl core: initialized pinctrl subsystem
[ 0.149217] RTC time: 23:34:40, date: 09/13/14
[ 0.149261] NET: Registered protocol family 16
[ 0.149360] cpuidle: using governor ladder
[ 0.149362] cpuidle: using governor menu
[ 0.149386] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.149388] ACPI: bus type PCI registered
[ 0.149389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.149452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.149454] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.149534] PCI: Using configuration type 1 for base access
[ 0.163412] ACPI: Added _OSI(Module Device)
[ 0.163414] ACPI: Added _OSI(Processor Device)
[ 0.163415] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163416] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165254] ACPI : EC: EC description table is found, configuring boot EC
[ 0.167131] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283333] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.313759] ACPI: Dynamic OEM Table Load:
[ 0.313766] ACPI: SSDT 0xFFFF8801A66AB000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.323515] ACPI: Dynamic OEM Table Load:
[ 0.323519] ACPI: SSDT 0xFFFF8801A6633C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.336756] ACPI: Dynamic OEM Table Load:
[ 0.336759] ACPI: SSDT 0xFFFF8801A665BE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.347197] ACPI: Interpreter enabled
[ 0.347203] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.347207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.347221] ACPI: (supports S0 S3 S4 S5)
[ 0.347222] ACPI: Using IOAPIC for interrupt routing
[ 0.347245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.468144] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.468149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.556840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.556961] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.557508] PCI host bridge to bus 0000:00
[ 0.557511] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.557512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.557514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.557515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.557517] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.557518] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.557519] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.557521] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.557522] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.557523] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.557525] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.557532] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.557613] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.557643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.557680] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.557718] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.557728] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.557734] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.557739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.557836] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.557859] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.557931] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.557971] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.558011] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.558034] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a00f 64bit]
[ 0.558108] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.558190] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.558212] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
[ 0.558303] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.558345] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.558382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.558398] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.558473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.558516] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.558550] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.558633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.558708] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.558790] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.558866] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.558948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.558992] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.559033] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.559054] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
[ 0.559145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.559186] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.559222] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.559393] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.559411] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.559418] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.559427] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.559434] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.559441] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.559449] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
[ 0.559495] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.559563] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.559579] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
[ 0.559600] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.559717] pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200
[ 0.559731] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.559743] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.559755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.559763] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.559772] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.563477] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.563482] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.563487] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.563493] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.563574] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.563712] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
[ 0.563765] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
[ 0.564012] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.564057] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.570225] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.570232] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.570322] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
[ 0.570354] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
[ 0.570368] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.570508] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570545] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.576839] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.576847] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.576854] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.576926] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.630685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.630728] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[ 0.630769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.630809] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 0.630851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.630892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.630936] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
[ 0.630976] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.631110] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.631171] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.631262] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.631264] vgaarb: loaded
[ 0.631265] vgaarb: bridge control possible 0000:00:02.0
[ 0.631295] PCI: Using ACPI for IRQ routing
[ 0.632841] PCI: pci_cache_line_size set to 64 bytes
[ 0.632894] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.632895] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.632896] e820: reserve RAM buffer [mem 0xad7a9000-0xafffffff]
[ 0.632901] e820: reserve RAM buffer [mem 0xaddc3000-0xafffffff]
[ 0.632906] e820: reserve RAM buffer [mem 0xaddcb000-0xafffffff]
[ 0.632911] e820: reserve RAM buffer [mem 0xadf2c000-0xafffffff]
[ 0.632915] e820: reserve RAM buffer [mem 0xadf7a000-0xafffffff]
[ 0.632919] e820: reserve RAM buffer [mem 0xadfa3000-0xafffffff]
[ 0.632924] e820: reserve RAM buffer [mem 0xadfbc000-0xafffffff]
[ 0.632928] e820: reserve RAM buffer [mem 0xadfca000-0xafffffff]
[ 0.632932] e820: reserve RAM buffer [mem 0xadfda000-0xafffffff]
[ 0.632935] e820: reserve RAM buffer [mem 0xadfe6000-0xafffffff]
[ 0.632939] e820: reserve RAM buffer [mem 0xae017000-0xafffffff]
[ 0.632942] e820: reserve RAM buffer [mem 0xae028000-0xafffffff]
[ 0.632946] e820: reserve RAM buffer [mem 0xae062000-0xafffffff]
[ 0.632949] e820: reserve RAM buffer [mem 0xae064000-0xafffffff]
[ 0.632951] e820: reserve RAM buffer [mem 0xae067000-0xafffffff]
[ 0.632954] e820: reserve RAM buffer [mem 0xae083000-0xafffffff]
[ 0.632956] e820: reserve RAM buffer [mem 0xae8ad000-0xafffffff]
[ 0.632958] e820: reserve RAM buffer [mem 0xaecff000-0xafffffff]
[ 0.632959] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.632961] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.633057] NetLabel: Initializing
[ 0.633058] NetLabel: domain hash size = 128
[ 0.633059] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.633069] NetLabel: unlabeled traffic allowed by default
[ 0.633093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.633097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.635125] Switched to clocksource hpet
[ 0.639054] pnp: PnP ACPI init
[ 0.639068] ACPI: bus type PNP registered
[ 0.639157] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.639160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.691999] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.692001] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.692003] system 00:01: [io 0xffff] has been reserved
[ 0.692004] system 00:01: [io 0xffff] has been reserved
[ 0.692006] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.692007] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.692009] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.692010] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.692013] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692041] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.692088] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.692090] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.692134] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.692136] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692189] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.692225] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.692379] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.692381] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.692383] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.692384] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.692386] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.692388] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.692389] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.692391] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.692393] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.692395] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.692396] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.692398] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692464] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.692466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.692587] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.692589] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.692591] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.692617] pnp: PnP ACPI: found 10 devices
[ 0.692618] ACPI: bus type PNP unregistered
[ 0.698950] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.698953] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.698956] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.698958] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.698961] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.698973] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.698978] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.698986] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.698989] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.698995] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.699004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.699005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.699007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.699008] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.699009] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.699011] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.699012] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.699014] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.699015] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.699016] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff]
[ 0.699018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.699019] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.699021] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.699023] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.699024] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.699026] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.699048] NET: Registered protocol family 2
[ 0.699217] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.699348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.699457] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.699472] TCP: reno registered
[ 0.699483] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.699508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.699564] NET: Registered protocol family 1
[ 0.699579] pci 0000:00:02.0: Boot video device
[ 0.735318] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.735322] PCI: CLS 64 bytes, default 64
[ 0.735362] Unpacking initramfs...
[ 0.816940] Freeing initrd memory: 5356K (ffff88003757a000 - ffff880037ab5000)
[ 0.816948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.816950] software IO TLB [mem 0xa97a9000-0xad7a9000] (64MB) mapped at [ffff8800a97a9000-ffff8800ad7a8fff]
[ 0.817180] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.817219] Scanning for low memory corruption every 60 seconds
[ 0.817445] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.817768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.818908] zbud: loaded
[ 0.819058] VFS: Disk quotas dquot_6.5.2
[ 0.819086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.819182] msgmni has been set to 10834
[ 0.819224] Key type big_key registered
[ 0.819368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.819416] io scheduler noop registered
[ 0.819420] io scheduler deadline registered
[ 0.819459] io scheduler cfq registered (default)
[ 0.819605] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.819964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.819978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.820007] intel_idle: MWAIT substates: 0x21120
[ 0.820008] intel_idle: v0.4 model 0x3A
[ 0.820009] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.820167] GHES: HEST is not enabled!
[ 0.820230] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.820623] Linux agpgart interface v0.103
[ 0.820666] rtc_cmos 00:02: RTC can wake from S4
[ 0.820787] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.820817] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.820826] Intel P-state driver initializing.
[ 0.820835] Intel pstate controlling: cpu 0
[ 0.820854] Intel pstate controlling: cpu 1
[ 0.820871] Intel pstate controlling: cpu 2
[ 0.820903] Intel pstate controlling: cpu 3
[ 0.820972] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.821169] TCP: cubic registered
[ 0.821332] NET: Registered protocol family 10
[ 0.821644] NET: Registered protocol family 17
[ 0.822136] registered taskstats version 1
[ 0.822912] Magic number: 14:465:605
[ 0.823042] rtc_cmos 00:02: setting system clock to 2014-09-13 23:34:40 UTC (1410651280)
[ 0.823314] PM: Hibernation image not present or could not be loaded.
[ 0.824652] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.824655] Write protecting the kernel read-only data: 8192k
[ 0.828153] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.829631] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.831604] random: systemd urandom read with 1 bits of entropy available
[ 0.832821] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 0.832824] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[ 0.835895] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
[ 0.835900] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
[ 0.835907] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[ 0.835915] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
[ 0.835918] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
[ 0.835921] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
[ 0.846204] systemd-udevd[61]: starting version 216
[ 0.851356] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.857066] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.858876] i8042: Detected active multiplexing controller, rev 1.1
[ 0.870874] ACPI: bus type USB registered
[ 0.870902] usbcore: registered new interface driver usbfs
[ 0.870913] usbcore: registered new interface driver hub
[ 0.870957] usbcore: registered new device driver usb
[ 0.871727] [drm] Initialized drm 1.1.0 20060810
[ 0.871912] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.871977] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.872004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.872031] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.872054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.872570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.872800] ehci-pci: EHCI PCI platform driver
[ 0.872972] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.872979] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.872995] ehci-pci 0000:00:1a.0: debug port 2
[ 0.873414] SCSI subsystem initialized
[ 0.874735] libata version 3.00 loaded.
[ 0.876901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.876921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
[ 0.878730] ACPI: Lid Switch [LID]
[ 0.878783] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.878787] ACPI: Sleep Button [SLPB]
[ 0.878823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.878824] ACPI: Power Button [PWRF]
[ 0.885423] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.885744] hub 1-0:1.0: USB hub found
[ 0.885754] hub 1-0:1.0: 2 ports detected
[ 0.886157] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.886163] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.886179] ehci-pci 0000:00:1d.0: debug port 2
[ 0.890092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.890108] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
[ 0.898678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.898863] hub 2-0:1.0: USB hub found
[ 0.898873] hub 2-0:1.0: 2 ports detected
[ 0.899123] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.899131] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.899234] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.899258] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.899457] hub 3-0:1.0: USB hub found
[ 0.899469] hub 3-0:1.0: 4 ports detected
[ 0.899602] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.899604] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.899850] hub 4-0:1.0: USB hub found
[ 0.899861] hub 4-0:1.0: 4 ports detected
[ 0.899997] ahci 0000:00:1f.2: version 3.0
[ 0.900123] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.912049] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.912054] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.919284] scsi0 : ahci
[ 0.919473] scsi1 : ahci
[ 0.919569] scsi2 : ahci
[ 0.919652] scsi3 : ahci
[ 0.919737] scsi4 : ahci
[ 0.919817] scsi5 : ahci
[ 0.919849] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 42
[ 0.919850] ata2: DUMMY
[ 0.919853] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 42
[ 0.919853] ata4: DUMMY
[ 0.919854] ata5: DUMMY
[ 0.919855] ata6: DUMMY
[ 0.920241] [drm] Memory usable by graphics device = 2048M
[ 0.920243] [drm] Replacing VGA console driver
[ 0.921140] Console: switching to colour dummy device 80x25
[ 0.927099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.978778] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.978791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.978793] [drm] Driver supports precise vblank timestamp query.
[ 0.992401] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.031464] fbcon: inteldrmfb (fb0) is primary device
[ 1.192296] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.238940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.238968] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.241132] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.241135] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.242336] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133
[ 1.244048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.244388] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.244391] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.244636] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.244639] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.245827] ata3.00: configured for UDMA/133
[ 1.249666] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
[ 1.249668] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.254977] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.255204] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.255207] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.260474] ata1.00: configured for UDMA/133
[ 1.260796] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
[ 1.262991] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5
[ 1.279845] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.279848] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.279989] sd 0:0:0:0: [sda] Write Protect is off
[ 1.279992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.280037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.288053] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.288055] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.288272] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.305366] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 1.305367] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 1.316307] hub 1-1:1.0: USB hub found
[ 1.316391] hub 1-1:1.0: 6 ports detected
[ 1.397316] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.399073] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.422404] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.546748] hub 2-1:1.0: USB hub found
[ 1.546905] hub 2-1:1.0: 6 ports detected
[ 1.683098] Console: switching to colour frame buffer device 240x67
[ 1.692813] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.692815] i915 0000:00:02.0: registered panic notifier
[ 1.709304] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 1.709735] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.709833] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
[ 1.727351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.752763] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 1.752815] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.819288] tsc: Refined TSC clocksource calibration: 2594.112 MHz
[ 1.887971] usb 3-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.890031] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.900283] usbcore: registered new interface driver usbhid
[ 1.900287] usbhid: USB HID core driver
[ 1.901514] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:077B.0001/input/input10
[ 1.901597] hid-generic 0003:045E:077B.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:14.0-3/input0
[ 1.966216] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.132934] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.416335] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 2.820032] Switched to clocksource tsc
[ 2.888651] random: nonblocking pool is initialized
[ 3.089789] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 3.358639] systemd-journald[53]: Received SIGTERM from PID 1 (systemd).
[ 5.897107] systemd-readahead[155]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 6.512882] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 7.301637] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.308423] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.314841] systemd-udevd[191]: starting version 216
[ 7.318026] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.643450] ACPI: AC Adapter [AC0] (off-line)
[ 9.707164] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
[ 9.707175] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 9.707183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707188] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707194] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707203] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707208] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707217] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 9.707222] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 9.707228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.707231] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.732620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.754610] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 9.823510] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140424/utaddress-258)
[ 9.823518] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 9.823522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.885093] ACPI: Battery Slot [BAT0] (battery present)
[ 9.885341] wmi: Mapper loaded
[ 10.025457] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 10.107482] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.107485] ACPI: Thermal Zone [THRM] (54 C)
[ 10.123269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 10.219286] cfg80211: Calling CRDA to update world regulatory domain
[ 10.271262] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 10.271264] Copyright(c) 2003- 2014 Intel Corporation
[ 10.271366] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.271428] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 10.310963] iTCO_vendor_support: vendor-support=0
[ 10.422203] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422220] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422235] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 10.422315] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.525335] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:70:de:11]
[ 10.559149] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.559206] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.559374] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.574607] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 10.677032] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 10.694508] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.694514] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.694517] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 10.694521] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 10.694580] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 10.703738] asus_wmi: ASUS WMI generic driver loaded
[ 10.704976] asus_wmi: Initialization: 0x1
[ 10.705014] asus_wmi: BIOS WMI version: 7.9
[ 10.705057] asus_wmi: SFUN value: 0x6a0877
[ 10.706030] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 10.715790] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.807860] asus_wmi: Backlight controlled by ACPI video driver
[ 10.883267] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.898742] sound hdaudioC0D0: autoconfig: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker
[ 10.898747] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.898750] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.898752] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.898754] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 10.898756] sound hdaudioC0D0: inputs:
[ 10.898759] sound hdaudioC0D0: Internal Mic=0x19
[ 10.898762] sound hdaudioC0D0: Mic=0x18
[ 10.911221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
[ 10.911566] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 10.911637] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 10.911707] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 11.070896] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 11.085464] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
[ 11.152788] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
[ 11.532713] systemd-udevd[285]: renamed network interface eth0 to enp4s0
[ 11.632559] systemd-udevd[285]: renamed network interface wlan0 to wlp3s0
[ 11.796657] mousedev: PS/2 mouse device common for all mice
[ 11.814896] AVX version of gcm_enc/dec engaged.
[ 12.249546] media: Linux media interface: v0.10
[ 12.405592] Linux video capture interface: v2.00
[ 12.489425] Bluetooth: Core ver 2.19
[ 12.489454] NET: Registered protocol family 31
[ 12.489458] Bluetooth: HCI device and connection manager initialized
[ 12.489470] Bluetooth: HCI socket layer initialized
[ 12.489475] Bluetooth: L2CAP socket layer initialized
[ 12.489499] Bluetooth: SCO socket layer initialized
[ 12.618057] usbcore: registered new interface driver btusb
[ 12.741864] Adding 6291452k swap on /dev/sda5. Priority:-1 extents:1 across:6291452k FS
[ 12.946876] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 12.964918] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21
[ 12.965046] usbcore: registered new interface driver uvcvideo
[ 12.965049] USB Video Class driver (1.1.1)
[ 13.388855] intel_rapl: RAPL domain dram detection failed
[ 15.010386] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.017669] systemd-journald[159]: Received request to flush runtime journal from PID 1
[ 27.377350] bbswitch: version 0.8
[ 27.377363] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 27.377367] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 27.377374] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 27.377449] bbswitch: detected an Optimus _DSM function
[ 27.377495] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 27.378547] bbswitch: disabling discrete graphics
[ 27.378554] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 27.805771] alx 0000:04:00.0: irq 47 for MSI/MSI-X
[ 27.806124] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 27.840453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 27.847948] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 28.089495] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 28.097001] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 28.163505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 28.525115] fuse init (API version 7.23)
[ 28.890210] wlp3s0: authenticate with 90:0d:cb:19:04:e0
[ 28.895402] wlp3s0: send auth to 90:0d:cb:19:04:e0 (try 1/3)
[ 28.897519] wlp3s0: authenticated
[ 28.900414] wlp3s0: associate with 90:0d:cb:19:04:e0 (try 1/3)
[ 28.916513] wlp3s0: RX AssocResp from 90:0d:cb:19:04:e0 (capab=0xc11 status=0 aid=4)
[ 28.936417] wlp3s0: associated
[ 28.936448] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 28.936477] cfg80211: Calling CRDA to update world regulatory domain
[ 32.940hcra wrote:You might see this Wiki page for long boot times and NetworkManager
https://wiki.archlinux.org/index.php/Sy … _over_time
Wow, that solved this problem. I had 5 GB of systemd logs. I deleted them (after making a backup on another disk), I limited the journal size to only 50MB, and now NetworkManager only lasts 4 seconds to start, and GDM appears 10 seconds earlier. Thanks a lot -
Intel D2700DC + Arch won't boot without display
I've faced really wierd (to me) problem running Arch as mini webserver on the Intel D2700DC mini-ITX board with Atom D2700 integrated and NM10 Express chipset.
I successfully installed the system, configured network and started sshd to continue setting up other services remotely via ssh console. Then I disconnected the keyboard and display from the case and put it under the table. After that I was quiet surprised that the system was not starting up anymore.
After some investigation I've found that the system is not booting if no display is attached to the DVI port of the motherboard. If I start the system with display disconnected, I can hear one beep that notifies about successful BIOS POST, HDD led blinks 2-3 times, and then just nothing happens. System isn't booting up. If I attach the display right after that - nothing is seen on the screen, and display is immediately falling into sleep mode. Keyboard is still active though, and if I press ctrl+alt+del - the system is restarting, and, if display was just connected, it boots ok then. Also it boots fine from the cold state if the display was attached to the DVI port at the time of powering on.
As I can assume from the timings and HDD led blinking, the boot process stops right after GRUB is loaded. There's nothing in system log, cause it seems that boot hangs just before the kernel is loaded by GRUB. I'm really stuck and don't know how to work around this situation, because if the display was disconnected when system was powered on - then there's no way to see anything on the screen until next reboot, and if the display was connected - then the system boots OK.
One more thing to notice:
There was an old CentOS installation on the HDD, to which I installed Arch Linux. I've tried to boot it once or twice before installing Arch, and, as I could remember, it could boot up without display connected, on the very same hardware. So I suppose it's definitely something in Arch that is preventing the system to boot without the display.
I guess that when no display is connected at boot time, NM10 chipset completely disables onboard video, and because of this we can't see anything on the display until the system is restarted. But this somehow affects Arch, so it can't boot without any video hardware present.
Last edited by rand256 (2012-05-10 10:23:28)I'm afraid there's no such option, but it looks like arch isn't booting just because no graphics card is detected in the system when display it disabled during powering up.
There is a couple of similar topics about some other linux distros can't boot without video card inserted ([1], [2]) with some recommendations on what to do in such a case.
I've followed them - including enabling serial console in /etc/inittab, setting nomodeset in kernel line in grub's menu.lst, checking for enabled splash-screens... but that didn't help.
Does anyone know what options should be tuned in order to boot Arch without any active graphics card present in the system hardware? -
Hey Guys,
Just installed my first copy of Arch on my machine. I am loving it so far, especially Pacman, however I would like to see about speeding up the boot time of the machine. This is sort of a generic question but what tips/tricks do you have to speed up boot times on Arch? I'm all about speed and efficiency and it seems like it is taking a little bit longer than it should. I have already skimmed down on interfaces loading on start up, modules that are not really necessary, and killed most of my scripts that run after boot. Suggestions?
Last edited by Morfir (2011-12-10 18:01:15)Build yourself a custom kernel, build in all of the modules you need to boot. Set yourself up to not use an initrd.
Mind you, keep the stock kernel and initrd on the boot partition and keep an entry for them in your /boot/grub/menu.lst. Add the custom kernel to the boot partition and make a new entry for it in the menu.lst file.
If you do this, make sure you set it to optimize for your specific processor.
See https://wiki.archlinux.org/index.php/Kernel_Compilation
also, if you have never compiled a kernel, take a look at:
http://www.gentoo.org/doc/en/handbook/ (No I am not joking -- Gentoo documentation on kernel compilation is unsurpassed) -
I noticed something odd when I analyzed boot times...
systemd-analyze shows:
Startup finished in 2.339s (kernel) + 1min 30.682s (userspace) = 1min 33.022s
That is showing 1min 33s for userspace which is NOT right at all. I was in my xfce desktop by the 9s mark.
systemd-analyze blame:
5.476s [email protected]
2.384s systemd-logind.service
1.484s colord.service
1.394s alsa-restore.service
998ms systemd-fsck@dev-disk-by\x2duuid-353c16c3\x2dcec1\x2d4999\x2d9bbb\x2d821c639c68a8.service
709ms dev-hugepages.mount
703ms sys-kernel-debug.mount
687ms systemd-fsck@dev-disk-by\x2duuid-f356e079\x2d6bc4\x2d4df1\x2da6f7\x2d0753be968197.service
679ms dev-mqueue.mount
654ms sys-kernel-config.mount
654ms systemd-remount-fs.service
649ms tmp.mount
590ms systemd-fsck@dev-disk-by\x2duuid-56563fab\x2d94d9\x2d4d27\x2db787\x2d89e4624ed842.service
583ms systemd-udev-trigger.service
557ms systemd-tmpfiles-setup-dev.service
556ms systemd-vconsole-setup.service
491ms dhcpcd.service
418ms home.mount
383ms systemd-fsck@dev-disk-by\x2duuid-67C4\x2d6755.service
339ms systemd-tmpfiles-setup.service
316ms systemd-sysctl.service
265ms polkit.service
200ms upower.service
160ms boot-efi.mount
143ms systemd-tmpfiles-clean.service
128ms systemd-journal-flush.service
125ms var.mount
117ms systemd-random-seed-load.service
104ms systemd-user-sessions.service
74ms systemd-update-utmp.service
42ms systemd-udevd.service
42ms boot.mount
No way that amounts to 1 minute 33 seconds.
Last edited by w201 (2013-05-31 00:41:06)I ran "sudo journalctl -b" on a fresh boot and got 1,229 lines adding up to roughly 54 seconds, starting at 20:22:52, ending at 20:23:43...still doesn't add up to 1 minute 33 seconds as shown by systemd-analyze, but what's interesting is that most of the boot up process is executed very quickly, and only in the last few lines is where most time is spent.
I will post the log so hopefully someone might shed some light. Like I said, I think the problem is in the last few lines, and I've gone through it several times hoping to find the problem, but I'm still a new so any help is appreciated!
-- Logs begin at Sun 2013-02-10 02:56:26 EST, end at Sun 2013-05-26 20:23:43 EDT
May 26 20:22:52 archw201 systemd-journal[126]: Allowing runtime journal files to
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys cpuset
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys cpu
May 26 20:22:52 archw201 kernel: Linux version 3.9.3-1-ARCH (tobias@T-POWA-LX) (
May 26 20:22:52 archw201 kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UU
May 26 20:22:52 archw201 kernel: e820: BIOS-provided physical RAM map:
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf3e1000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf429000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf437000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf438000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf458000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf47a000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf501000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf502000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf514000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf51f000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf530000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf573000-0x00000000cf
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fe
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ff
lines 1-23...skipping...
-- Logs begin at Sun 2013-02-10 02:56:26 EST, end at Sun 2013-05-26 20:23:43 EDT. --
May 26 20:22:52 archw201 systemd-journal[126]: Allowing runtime journal files to grow to 195.8M.
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys cpuset
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys cpu
May 26 20:22:52 archw201 kernel: Linux version 3.9.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130502 (prerelease) (GCC) ) #1 SMP PREEMPT Sun May 19 22:50
May 26 20:22:52 archw201 kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=633910d4-7549-417b-9b03-a50f633e1a80 ro quiet
May 26 20:22:52 archw201 kernel: e820: BIOS-provided physical RAM map:
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cf3e0fff] usable
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf3e1000-0x00000000cf428fff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf429000-0x00000000cf436fff] ACPI data
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf437000-0x00000000cf437fff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf438000-0x00000000cf457fff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf458000-0x00000000cf479fff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf47a000-0x00000000cf500fff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf501000-0x00000000cf501fff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf502000-0x00000000cf513fff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf514000-0x00000000cf51efff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf51f000-0x00000000cf52ffff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf530000-0x00000000cf572fff] ACPI NVS
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000cf573000-0x00000000cf7fffff] usable
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
May 26 20:22:52 archw201 kernel: BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
May 26 20:22:52 archw201 kernel: NX (Execute Disable) protection: active
May 26 20:22:52 archw201 kernel: efi: EFI v2.10 by American Megatrends
May 26 20:22:52 archw201 kernel: efi: SMBIOS=0xcf52eb98 ACPI=0xcf429000 ACPI 2.0=0xcf429000 MPS=0xf4b40
May 26 20:22:52 archw201 kernel: efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000077000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem02: type=4, attr=0xf, range=[0x0000000000077000-0x0000000000078000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem03: type=3, attr=0xf, range=[0x0000000000078000-0x00000000000a0000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem04: type=3, attr=0xf, range=[0x0000000000100000-0x0000000000110000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem05: type=7, attr=0xf, range=[0x0000000000110000-0x0000000001000000) (14MB)
May 26 20:22:52 archw201 kernel: efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
May 26 20:22:52 archw201 kernel: efi: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001562000) (4MB)
May 26 20:22:52 archw201 kernel: efi: mem08: type=3, attr=0xf, range=[0x0000000001562000-0x0000000001566000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem09: type=4, attr=0xf, range=[0x0000000001566000-0x0000000001585000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem10: type=3, attr=0xf, range=[0x0000000001585000-0x0000000001593000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem11: type=4, attr=0xf, range=[0x0000000001593000-0x000000000159a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem12: type=3, attr=0xf, range=[0x000000000159a000-0x000000000159f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem13: type=4, attr=0xf, range=[0x000000000159f000-0x00000000015a5000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem14: type=3, attr=0xf, range=[0x00000000015a5000-0x00000000015a8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem15: type=4, attr=0xf, range=[0x00000000015a8000-0x00000000015ac000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem16: type=3, attr=0xf, range=[0x00000000015ac000-0x00000000015b0000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem17: type=4, attr=0xf, range=[0x00000000015b0000-0x00000000015b6000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem18: type=3, attr=0xf, range=[0x00000000015b6000-0x00000000015b7000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem19: type=4, attr=0xf, range=[0x00000000015b7000-0x00000000015d3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem20: type=3, attr=0xf, range=[0x00000000015d3000-0x00000000015df000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem21: type=4, attr=0xf, range=[0x00000000015df000-0x00000000015e4000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem22: type=3, attr=0xf, range=[0x00000000015e4000-0x00000000015ea000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem23: type=4, attr=0xf, range=[0x00000000015ea000-0x000000000160e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem24: type=3, attr=0xf, range=[0x000000000160e000-0x0000000001627000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem25: type=4, attr=0xf, range=[0x0000000001627000-0x000000000162e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem26: type=3, attr=0xf, range=[0x000000000162e000-0x0000000001630000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem27: type=4, attr=0xf, range=[0x0000000001630000-0x0000000001631000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem28: type=3, attr=0xf, range=[0x0000000001631000-0x0000000001632000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem29: type=4, attr=0xf, range=[0x0000000001632000-0x0000000001633000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem30: type=3, attr=0xf, range=[0x0000000001633000-0x0000000001635000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem31: type=4, attr=0xf, range=[0x0000000001635000-0x000000000163d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem32: type=3, attr=0xf, range=[0x000000000163d000-0x0000000001641000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem33: type=4, attr=0xf, range=[0x0000000001641000-0x0000000001644000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem34: type=3, attr=0xf, range=[0x0000000001644000-0x000000000164b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem35: type=4, attr=0xf, range=[0x000000000164b000-0x000000000165f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem36: type=3, attr=0xf, range=[0x000000000165f000-0x0000000001669000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem37: type=4, attr=0xf, range=[0x0000000001669000-0x000000000166e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem38: type=3, attr=0xf, range=[0x000000000166e000-0x0000000001670000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem39: type=4, attr=0xf, range=[0x0000000001670000-0x0000000001672000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem40: type=3, attr=0xf, range=[0x0000000001672000-0x0000000001674000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem41: type=4, attr=0xf, range=[0x0000000001674000-0x0000000001675000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem42: type=3, attr=0xf, range=[0x0000000001675000-0x0000000001677000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem43: type=4, attr=0xf, range=[0x0000000001677000-0x0000000001682000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem44: type=3, attr=0xf, range=[0x0000000001682000-0x0000000001686000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem45: type=4, attr=0xf, range=[0x0000000001686000-0x0000000001687000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem46: type=3, attr=0xf, range=[0x0000000001687000-0x000000000168f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem47: type=4, attr=0xf, range=[0x000000000168f000-0x0000000001693000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem48: type=3, attr=0xf, range=[0x0000000001693000-0x0000000001695000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem49: type=4, attr=0xf, range=[0x0000000001695000-0x000000000169a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem50: type=3, attr=0xf, range=[0x000000000169a000-0x000000000169d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem51: type=4, attr=0xf, range=[0x000000000169d000-0x00000000016d3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem52: type=3, attr=0xf, range=[0x00000000016d3000-0x00000000016d9000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem53: type=4, attr=0xf, range=[0x00000000016d9000-0x00000000016db000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem54: type=3, attr=0xf, range=[0x00000000016db000-0x00000000016e3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem55: type=4, attr=0xf, range=[0x00000000016e3000-0x00000000016eb000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem56: type=3, attr=0xf, range=[0x00000000016eb000-0x000000000170a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem57: type=4, attr=0xf, range=[0x000000000170a000-0x000000000170e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem58: type=3, attr=0xf, range=[0x000000000170e000-0x0000000001712000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem59: type=4, attr=0xf, range=[0x0000000001712000-0x0000000001722000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem60: type=3, attr=0xf, range=[0x0000000001722000-0x0000000001732000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem61: type=4, attr=0xf, range=[0x0000000001732000-0x00000000017f3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem62: type=3, attr=0xf, range=[0x00000000017f3000-0x00000000017f5000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem63: type=4, attr=0xf, range=[0x00000000017f5000-0x00000000017f7000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem64: type=3, attr=0xf, range=[0x00000000017f7000-0x00000000017f8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem65: type=4, attr=0xf, range=[0x00000000017f8000-0x0000000001802000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem66: type=3, attr=0xf, range=[0x0000000001802000-0x0000000001805000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem67: type=4, attr=0xf, range=[0x0000000001805000-0x0000000001cd7000) (4MB)
May 26 20:22:52 archw201 kernel: efi: mem68: type=3, attr=0xf, range=[0x0000000001cd7000-0x0000000001cda000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem69: type=4, attr=0xf, range=[0x0000000001cda000-0x0000000001cee000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem70: type=3, attr=0xf, range=[0x0000000001cee000-0x0000000001cef000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem71: type=4, attr=0xf, range=[0x0000000001cef000-0x0000000001cf1000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem72: type=3, attr=0xf, range=[0x0000000001cf1000-0x0000000001cf4000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem73: type=4, attr=0xf, range=[0x0000000001cf4000-0x0000000001d04000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem74: type=3, attr=0xf, range=[0x0000000001d04000-0x0000000001d4a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem75: type=4, attr=0xf, range=[0x0000000001d4a000-0x0000000001d4f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem76: type=3, attr=0xf, range=[0x0000000001d4f000-0x0000000001d56000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem77: type=4, attr=0xf, range=[0x0000000001d56000-0x0000000001d89000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem78: type=3, attr=0xf, range=[0x0000000001d89000-0x0000000001d8b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem79: type=4, attr=0xf, range=[0x0000000001d8b000-0x0000000001da2000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem80: type=3, attr=0xf, range=[0x0000000001da2000-0x0000000001dab000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem81: type=4, attr=0xf, range=[0x0000000001dab000-0x0000000001db8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem82: type=3, attr=0xf, range=[0x0000000001db8000-0x0000000001dc2000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem83: type=4, attr=0xf, range=[0x0000000001dc2000-0x0000000002132000) (3MB)
May 26 20:22:52 archw201 kernel: efi: mem84: type=3, attr=0xf, range=[0x0000000002132000-0x0000000002142000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem85: type=4, attr=0xf, range=[0x0000000002142000-0x000000000214a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem86: type=3, attr=0xf, range=[0x000000000214a000-0x000000000214d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem87: type=4, attr=0xf, range=[0x000000000214d000-0x0000000002154000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem88: type=3, attr=0xf, range=[0x0000000002154000-0x0000000002156000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem89: type=4, attr=0xf, range=[0x0000000002156000-0x0000000002157000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem90: type=3, attr=0xf, range=[0x0000000002157000-0x000000000215c000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem91: type=4, attr=0xf, range=[0x000000000215c000-0x0000000002164000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem92: type=3, attr=0xf, range=[0x0000000002164000-0x0000000002167000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem93: type=4, attr=0xf, range=[0x0000000002167000-0x000000000216b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem94: type=3, attr=0xf, range=[0x000000000216b000-0x0000000002172000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem95: type=4, attr=0xf, range=[0x0000000002172000-0x0000000002178000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem96: type=3, attr=0xf, range=[0x0000000002178000-0x000000000217b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem97: type=4, attr=0xf, range=[0x000000000217b000-0x000000000217c000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem98: type=3, attr=0xf, range=[0x000000000217c000-0x000000000217e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem99: type=4, attr=0xf, range=[0x000000000217e000-0x0000000002186000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem100: type=3, attr=0xf, range=[0x0000000002186000-0x000000000218b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem101: type=4, attr=0xf, range=[0x000000000218b000-0x00000000021a8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem102: type=3, attr=0xf, range=[0x00000000021a8000-0x00000000021ad000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem103: type=4, attr=0xf, range=[0x00000000021ad000-0x00000000021af000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem104: type=3, attr=0xf, range=[0x00000000021af000-0x00000000021b9000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem105: type=4, attr=0xf, range=[0x00000000021b9000-0x00000000021bb000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem106: type=3, attr=0xf, range=[0x00000000021bb000-0x00000000021bd000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem107: type=4, attr=0xf, range=[0x00000000021bd000-0x00000000021bf000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem108: type=3, attr=0xf, range=[0x00000000021bf000-0x00000000021c1000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem109: type=4, attr=0xf, range=[0x00000000021c1000-0x00000000021c4000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem110: type=3, attr=0xf, range=[0x00000000021c4000-0x00000000021c8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem111: type=4, attr=0xf, range=[0x00000000021c8000-0x00000000021cd000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem112: type=3, attr=0xf, range=[0x00000000021cd000-0x00000000021d0000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem113: type=4, attr=0xf, range=[0x00000000021d0000-0x00000000021d9000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem114: type=3, attr=0xf, range=[0x00000000021d9000-0x00000000021db000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem115: type=4, attr=0xf, range=[0x00000000021db000-0x00000000021ee000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem116: type=3, attr=0xf, range=[0x00000000021ee000-0x00000000021f3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem117: type=4, attr=0xf, range=[0x00000000021f3000-0x00000000021fa000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem118: type=3, attr=0xf, range=[0x00000000021fa000-0x0000000002206000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem119: type=4, attr=0xf, range=[0x0000000002206000-0x000000000221b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem120: type=3, attr=0xf, range=[0x000000000221b000-0x000000000221e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem121: type=4, attr=0xf, range=[0x000000000221e000-0x0000000002227000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem122: type=7, attr=0xf, range=[0x0000000002227000-0x000000000222a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem123: type=3, attr=0xf, range=[0x000000000222a000-0x000000000223c000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem124: type=4, attr=0xf, range=[0x000000000223c000-0x0000000002504000) (2MB)
May 26 20:22:52 archw201 kernel: efi: mem125: type=3, attr=0xf, range=[0x0000000002504000-0x000000000250f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem126: type=4, attr=0xf, range=[0x000000000250f000-0x0000000002511000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem127: type=7, attr=0xf, range=[0x0000000002511000-0x0000000002519000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem128: type=4, attr=0xf, range=[0x0000000002519000-0x00000000026c6000) (1MB)
May 26 20:22:52 archw201 kernel: efi: mem129: type=7, attr=0xf, range=[0x00000000026c6000-0x00000000026d7000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem130: type=4, attr=0xf, range=[0x00000000026d7000-0x0000000002704000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem131: type=7, attr=0xf, range=[0x0000000002704000-0x0000000002725000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem132: type=4, attr=0xf, range=[0x0000000002725000-0x0000000002727000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem133: type=1, attr=0xf, range=[0x0000000002727000-0x0000000002745000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem134: type=7, attr=0xf, range=[0x0000000002745000-0x00000000027cc000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem135: type=4, attr=0xf, range=[0x00000000027cc000-0x00000000027d7000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem136: type=7, attr=0xf, range=[0x00000000027d7000-0x000000000282d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem137: type=4, attr=0xf, range=[0x000000000282d000-0x000000000282e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem138: type=7, attr=0xf, range=[0x000000000282e000-0x0000000002835000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem139: type=4, attr=0xf, range=[0x0000000002835000-0x0000000002838000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem140: type=7, attr=0xf, range=[0x0000000002838000-0x00000000028c6000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem141: type=4, attr=0xf, range=[0x00000000028c6000-0x00000000028d1000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem142: type=7, attr=0xf, range=[0x00000000028d1000-0x000000000292d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem143: type=4, attr=0xf, range=[0x000000000292d000-0x000000000292e000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem144: type=7, attr=0xf, range=[0x000000000292e000-0x0000000002930000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem145: type=4, attr=0xf, range=[0x0000000002930000-0x0000000002931000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem146: type=7, attr=0xf, range=[0x0000000002931000-0x0000000002933000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem147: type=4, attr=0xf, range=[0x0000000002933000-0x0000000002934000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem148: type=7, attr=0xf, range=[0x0000000002934000-0x0000000002961000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem149: type=4, attr=0xf, range=[0x0000000002961000-0x0000000002962000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem150: type=7, attr=0xf, range=[0x0000000002962000-0x00000000029c0000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem151: type=4, attr=0xf, range=[0x00000000029c0000-0x00000000029cb000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem152: type=7, attr=0xf, range=[0x00000000029cb000-0x0000000002a27000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem153: type=4, attr=0xf, range=[0x0000000002a27000-0x0000000002a2b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem154: type=7, attr=0xf, range=[0x0000000002a2b000-0x0000000002a58000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem155: type=4, attr=0xf, range=[0x0000000002a58000-0x0000000002a59000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem156: type=7, attr=0xf, range=[0x0000000002a59000-0x0000000002ab7000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem157: type=4, attr=0xf, range=[0x0000000002ab7000-0x0000000002ac2000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem158: type=7, attr=0xf, range=[0x0000000002ac2000-0x0000000002b1a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem159: type=4, attr=0xf, range=[0x0000000002b1a000-0x0000000002b1b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem160: type=7, attr=0xf, range=[0x0000000002b1b000-0x0000000002b20000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem161: type=4, attr=0xf, range=[0x0000000002b20000-0x0000000002b21000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem162: type=7, attr=0xf, range=[0x0000000002b21000-0x0000000002baf000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem163: type=4, attr=0xf, range=[0x0000000002baf000-0x0000000002bba000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem164: type=7, attr=0xf, range=[0x0000000002bba000-0x0000000002c17000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem165: type=4, attr=0xf, range=[0x0000000002c17000-0x0000000002c55000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem166: type=7, attr=0xf, range=[0x0000000002c55000-0x0000000002ca6000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem167: type=4, attr=0xf, range=[0x0000000002ca6000-0x0000000002cb1000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem168: type=7, attr=0xf, range=[0x0000000002cb1000-0x0000000002cf2000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem169: type=4, attr=0xf, range=[0x0000000002cf2000-0x0000000002cf3000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem170: type=7, attr=0xf, range=[0x0000000002cf3000-0x0000000002d0a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem171: type=4, attr=0xf, range=[0x0000000002d0a000-0x0000000002d0b000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem172: type=7, attr=0xf, range=[0x0000000002d0b000-0x0000000002d10000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem173: type=4, attr=0xf, range=[0x0000000002d10000-0x00000000030f9000) (3MB)
May 26 20:22:52 archw201 kernel: efi: mem174: type=7, attr=0xf, range=[0x00000000030f9000-0x0000000003136000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem175: type=4, attr=0xf, range=[0x0000000003136000-0x00000000031f1000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem176: type=2, attr=0xf, range=[0x00000000031f1000-0x0000000004142000) (15MB)
May 26 20:22:52 archw201 kernel: efi: mem177: type=7, attr=0xf, range=[0x0000000004142000-0x0000000005000000) (14MB)
May 26 20:22:52 archw201 kernel: efi: mem178: type=2, attr=0xf, range=[0x0000000005000000-0x0000000005f51000) (15MB)
May 26 20:22:52 archw201 kernel: efi: mem179: type=7, attr=0xf, range=[0x0000000005f51000-0x0000000037a58000) (795MB)
May 26 20:22:52 archw201 kernel: efi: mem180: type=2, attr=0xf, range=[0x0000000037a58000-0x0000000037d24000) (2MB)
May 26 20:22:52 archw201 kernel: efi: mem181: type=7, attr=0xf, range=[0x0000000037d24000-0x000000009be3e000) (1601MB)
May 26 20:22:52 archw201 kernel: efi: mem182: type=2, attr=0xf, range=[0x000000009be3e000-0x00000000cf3e1000) (821MB)
May 26 20:22:52 archw201 kernel: efi: mem183: type=10, attr=0xf, range=[0x00000000cf3e1000-0x00000000cf429000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem184: type=9, attr=0xf, range=[0x00000000cf429000-0x00000000cf437000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem185: type=10, attr=0xf, range=[0x00000000cf437000-0x00000000cf438000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem186: type=0, attr=0xf, range=[0x00000000cf438000-0x00000000cf447000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem187: type=5, attr=0x800000000000000f, range=[0x00000000cf447000-0x00000000cf44c000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem188: type=0, attr=0xf, range=[0x00000000cf44c000-0x00000000cf44f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem189: type=6, attr=0x800000000000000f, range=[0x00000000cf44f000-0x00000000cf458000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem190: type=10, attr=0xf, range=[0x00000000cf458000-0x00000000cf47a000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem191: type=6, attr=0x800000000000000f, range=[0x00000000cf47a000-0x00000000cf4fb000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem192: type=5, attr=0x800000000000000f, range=[0x00000000cf4fb000-0x00000000cf500000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem193: type=6, attr=0x800000000000000f, range=[0x00000000cf500000-0x00000000cf501000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem194: type=10, attr=0xf, range=[0x00000000cf501000-0x00000000cf502000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem195: type=6, attr=0x800000000000000f, range=[0x00000000cf502000-0x00000000cf504000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem196: type=0, attr=0xf, range=[0x00000000cf504000-0x00000000cf514000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem197: type=10, attr=0xf, range=[0x00000000cf514000-0x00000000cf51f000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem198: type=5, attr=0x800000000000000f, range=[0x00000000cf51f000-0x00000000cf521000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem199: type=6, attr=0x800000000000000f, range=[0x00000000cf521000-0x00000000cf523000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem200: type=5, attr=0x800000000000000f, range=[0x00000000cf523000-0x00000000cf52d000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem201: type=6, attr=0x800000000000000f, range=[0x00000000cf52d000-0x00000000cf530000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem202: type=10, attr=0xf, range=[0x00000000cf530000-0x00000000cf573000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem203: type=3, attr=0xf, range=[0x00000000cf573000-0x00000000cf7f5000) (2MB)
May 26 20:22:52 archw201 kernel: efi: mem204: type=4, attr=0xf, range=[0x00000000cf7f5000-0x00000000cf7f8000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem205: type=3, attr=0xf, range=[0x00000000cf7f8000-0x00000000cf800000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem206: type=7, attr=0xf, range=[0x0000000100000000-0x000000012e000000) (736MB)
May 26 20:22:52 archw201 kernel: efi: mem207: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem208: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fed40000) (0MB)
May 26 20:22:52 archw201 kernel: efi: mem209: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
May 26 20:22:52 archw201 kernel: SMBIOS 2.7 present.
May 26 20:22:52 archw201 kernel: DMI: Hewlett-Packard HP Compaq 8200 Elite SFF PC/1495, BIOS J01 v02.01 04/06/2011
May 26 20:22:52 archw201 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 26 20:22:52 archw201 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
May 26 20:22:52 archw201 kernel: No AGP bridge found
May 26 20:22:52 archw201 kernel: e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
May 26 20:22:52 archw201 kernel: MTRR default type: write-back
May 26 20:22:52 archw201 kernel: MTRR fixed ranges enabled:
May 26 20:22:52 archw201 kernel: 00000-9FFFF write-back
May 26 20:22:52 archw201 kernel: A0000-BFFFF uncachable
May 26 20:22:52 archw201 kernel: C0000-FFFFF write-protect
May 26 20:22:52 archw201 kernel: MTRR variable ranges enabled:
May 26 20:22:52 archw201 kernel: 0 base 0D0000000 mask FF0000000 uncachable
May 26 20:22:52 archw201 kernel: 1 base 0E0000000 mask FE0000000 uncachable
May 26 20:22:52 archw201 kernel: 2 base 12E000000 mask FFE000000 uncachable
May 26 20:22:52 archw201 kernel: 3 disabled
May 26 20:22:52 archw201 kernel: 4 disabled
May 26 20:22:52 archw201 kernel: 5 disabled
May 26 20:22:52 archw201 kernel: 6 disabled
May 26 20:22:52 archw201 kernel: 7 disabled
May 26 20:22:52 archw201 kernel: 8 disabled
May 26 20:22:52 archw201 kernel: 9 disabled
May 26 20:22:52 archw201 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
May 26 20:22:52 archw201 kernel: e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
May 26 20:22:52 archw201 kernel: found SMP MP-table at [mem 0x000f4b30-0x000f4b3f] mapped at [ffff8800000f4b30]
May 26 20:22:52 archw201 kernel: Scanning 1 areas for low memory corruption
May 26 20:22:52 archw201 kernel: Base memory trampoline at [ffff880000095000] 95000 size 24576
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
May 26 20:22:52 archw201 kernel: [mem 0x00000000-0x000fffff] page 4k
May 26 20:22:52 archw201 kernel: BRK [0x05b30000, 0x05b30fff] PGTABLE
May 26 20:22:52 archw201 kernel: BRK [0x05b31000, 0x05b31fff] PGTABLE
May 26 20:22:52 archw201 kernel: BRK [0x05b32000, 0x05b32fff] PGTABLE
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0x12de00000-0x12dffffff]
May 26 20:22:52 archw201 kernel: [mem 0x12de00000-0x12dffffff] page 2M
May 26 20:22:52 archw201 kernel: BRK [0x05b33000, 0x05b33fff] PGTABLE
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0x12c000000-0x12ddfffff]
May 26 20:22:52 archw201 kernel: [mem 0x12c000000-0x12ddfffff] page 2M
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0x100000000-0x12bffffff]
May 26 20:22:52 archw201 kernel: [mem 0x100000000-0x12bffffff] page 2M
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0x00100000-0xcf3e0fff]
May 26 20:22:52 archw201 kernel: [mem 0x00100000-0x001fffff] page 4k
May 26 20:22:52 archw201 kernel: [mem 0x00200000-0xcf1fffff] page 2M
May 26 20:22:52 archw201 kernel: [mem 0xcf200000-0xcf3e0fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf573000-0xcf7fffff]
May 26 20:22:52 archw201 kernel: [mem 0xcf573000-0xcf5fffff] page 4k
May 26 20:22:52 archw201 kernel: [mem 0xcf600000-0xcf7fffff] page 2M
May 26 20:22:52 archw201 kernel: BRK [0x05b34000, 0x05b34fff] PGTABLE
May 26 20:22:52 archw201 kernel: RAMDISK: [mem 0x37a58000-0x37d23fff]
May 26 20:22:52 archw201 kernel: ACPI: RSDP 00000000cf429000 00024 (v02 HPQOEM)
May 26 20:22:52 archw201 kernel: ACPI: XSDT 00000000cf429078 0006C (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
May 26 20:22:52 archw201 kernel: ACPI: FACP 00000000cf4309b8 000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI 00010013)
May 26 20:22:52 archw201 kernel: ACPI: DSDT 00000000cf429170 07841 (v02 HPQOEM SLIC-BPC 00000007 INTL 20051117)
May 26 20:22:52 archw201 kernel: ACPI: FACS 00000000cf516f80 00040
May 26 20:22:52 archw201 kernel: ACPI: APIC 00000000cf430ab0 00072 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013)
May 26 20:22:52 archw201 kernel: ACPI: SSDT 00000000cf430b28 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: MCFG 00000000cf430c30 0003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
May 26 20:22:52 archw201 kernel: ACPI: HPET 00000000cf430c70 00038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004)
May 26 20:22:52 archw201 kernel: ACPI: ASF! 00000000cf430ca8 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
May 26 20:22:52 archw201 kernel: ACPI: SSDT 00000000cf430d48 050F4 (v01 COMPAQ WMI 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: SLIC 00000000cf435e40 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
May 26 20:22:52 archw201 kernel: ACPI: TCPA 00000000cf435fb8 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
May 26 20:22:52 archw201 kernel: ACPI: Local APIC address 0xfee00000
May 26 20:22:52 archw201 kernel: No NUMA configuration found
May 26 20:22:52 archw201 kernel: Faking a node at [mem 0x0000000000000000-0x000000012dffffff]
May 26 20:22:52 archw201 kernel: Initmem setup node 0 [mem 0x00000000-0x12dffffff]
May 26 20:22:52 archw201 kernel: NODE_DATA [mem 0x12dff7000-0x12dffbfff]
May 26 20:22:52 archw201 kernel: [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129600000-ffff88012d5fffff] on node 0
May 26 20:22:52 archw201 kernel: Zone ranges:
May 26 20:22:52 archw201 kernel: DMA [mem 0x00001000-0x00ffffff]
May 26 20:22:52 archw201 kernel: DMA32 [mem 0x01000000-0xffffffff]
May 26 20:22:52 archw201 kernel: Normal [mem 0x100000000-0x12dffffff]
May 26 20:22:52 archw201 kernel: Movable zone start for each node
May 26 20:22:52 archw201 kernel: Early memory node ranges
May 26 20:22:52 archw201 kernel: node 0: [mem 0x00001000-0x0009ffff]
May 26 20:22:52 archw201 kernel: node 0: [mem 0x00100000-0xcf3e0fff]
May 26 20:22:52 archw201 kernel: node 0: [mem 0xcf573000-0xcf7fffff]
May 26 20:22:52 archw201 kernel: node 0: [mem 0x100000000-0x12dffffff]
May 26 20:22:52 archw201 kernel: On node 0 totalpages: 1037837
May 26 20:22:52 archw201 kernel: DMA zone: 64 pages used for memmap
May 26 20:22:52 archw201 kernel: DMA zone: 46 pages reserved
May 26 20:22:52 archw201 kernel: DMA zone: 3999 pages, LIFO batch:0
May 26 20:22:52 archw201 kernel: DMA32 zone: 13210 pages used for memmap
May 26 20:22:52 archw201 kernel: DMA32 zone: 845422 pages, LIFO batch:31
May 26 20:22:52 archw201 kernel: Normal zone: 2944 pages used for memmap
May 26 20:22:52 archw201 kernel: Normal zone: 188416 pages, LIFO batch:31
May 26 20:22:52 archw201 kernel: ACPI: PM-Timer IO Port: 0x408
May 26 20:22:52 archw201 kernel: ACPI: Local APIC address 0xfee00000
May 26 20:22:52 archw201 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
May 26 20:22:52 archw201 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
May 26 20:22:52 archw201 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
May 26 20:22:52 archw201 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
May 26 20:22:52 archw201 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
May 26 20:22:52 archw201 kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
May 26 20:22:52 archw201 kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
May 26 20:22:52 archw201 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 26 20:22:52 archw201 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 26 20:22:52 archw201 kernel: ACPI: IRQ0 used by override.
May 26 20:22:52 archw201 kernel: ACPI: IRQ2 used by override.
May 26 20:22:52 archw201 kernel: ACPI: IRQ9 used by override.
May 26 20:22:52 archw201 kernel: Using ACPI (MADT) for SMP configuration information
May 26 20:22:52 archw201 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
May 26 20:22:52 archw201 kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
May 26 20:22:52 archw201 kernel: nr_irqs_gsi: 40
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf3e1000 - 00000000cf429000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf429000 - 00000000cf437000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf437000 - 00000000cf438000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf438000 - 00000000cf458000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf458000 - 00000000cf47a000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf47a000 - 00000000cf501000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf501000 - 00000000cf502000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf502000 - 00000000cf514000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf514000 - 00000000cf51f000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf51f000 - 00000000cf530000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf530000 - 00000000cf573000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
May 26 20:22:52 archw201 kernel: PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
May 26 20:22:52 archw201 kernel: e820: [mem 0xcf800000-0xfed1bfff] available for PCI devices
May 26 20:22:52 archw201 kernel: Booting paravirtualized kernel on bare hardware
May 26 20:22:52 archw201 kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
May 26 20:22:52 archw201 kernel: PERCPU: Embedded 28 pages/cpu @ffff88012dc00000 s85824 r8192 d20672 u524288
May 26 20:22:52 archw201 kernel: pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
May 26 20:22:52 archw201 kernel: pcpu-alloc: [0] 0 1 2 3
May 26 20:22:52 archw201 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021573
May 26 20:22:52 archw201 kernel: Policy zone: Normal
May 26 20:22:52 archw201 kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=633910d4-7549-417b-9b03-a50f633e1a80 ro quiet
May 26 20:22:52 archw201 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
May 26 20:22:52 archw201 kernel: __ex_table already sorted, skipping sort
May 26 20:22:52 archw201 kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
May 26 20:22:52 archw201 kernel: Checking aperture...
May 26 20:22:52 archw201 kernel: No AGP bridge found
May 26 20:22:52 archw201 kernel: Calgary: detecting Calgary via BIOS EBDA area
May 26 20:22:52 archw201 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
May 26 20:22:52 archw201 kernel: Memory: 3974112k/4947968k available (4983k kernel code, 796620k absent, 177236k reserved, 3967k data, 1092k init)
May 26 20:22:52 archw201 kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
May 26 20:22:52 archw201 kernel: Preemptible hierarchical RCU implementation.
May 26 20:22:52 archw201 kernel: RCU dyntick-idle grace-period acceleration is enabled.
May 26 20:22:52 archw201 kernel: Dump stacks of tasks blocking RCU-preempt GP.
May 26 20:22:52 archw201 kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
May 26 20:22:52 archw201 kernel: NR_IRQS:4352 nr_irqs:712 16
May 26 20:22:52 archw201 kernel: Console: colour dummy device 80x25
May 26 20:22:52 archw201 kernel: console [tty0] enabled
May 26 20:22:52 archw201 kernel: allocated 16777216 bytes of page_cgroup
May 26 20:22:52 archw201 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
May 26 20:22:52 archw201 kernel: hpet clockevent registered
May 26 20:22:52 archw201 kernel: tsc: Fast TSC calibration failed
May 26 20:22:52 archw201 kernel: tsc: PIT calibration matches HPET. 1 loops
May 26 20:22:52 archw201 kernel: tsc: Detected 3092.785 MHz processor
May 26 20:22:52 archw201 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6188.30 BogoMIPS (lpj=10309283)
May 26 20:22:52 archw201 kernel: pid_max: default: 32768 minimum: 301
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf447000-0xcf44bfff]
May 26 20:22:52 archw201 kernel: [mem 0xcf447000-0xcf44bfff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf44f000-0xcf457fff]
May 26 20:22:52 archw201 kernel: [mem 0xcf44f000-0xcf457fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf47a000-0xcf4fafff]
May 26 20:22:52 archw201 kernel: [mem 0xcf47a000-0xcf4fafff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf4fb000-0xcf4fffff]
May 26 20:22:52 archw201 kernel: [mem 0xcf4fb000-0xcf4fffff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf500000-0xcf500fff]
May 26 20:22:52 archw201 kernel: [mem 0xcf500000-0xcf500fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf502000-0xcf503fff]
May 26 20:22:52 archw201 kernel: [mem 0xcf502000-0xcf503fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf51f000-0xcf520fff]
May 26 20:22:52 archw201 kernel: [mem 0xcf51f000-0xcf520fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf521000-0xcf522fff]
May 26 20:22:52 archw201 kernel: [mem 0xcf521000-0xcf522fff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf523000-0xcf52cfff]
May 26 20:22:52 archw201 kernel: [mem 0xcf523000-0xcf52cfff] page 4k
May 26 20:22:52 archw201 kernel: init_memory_mapping: [mem 0xcf52d000-0xcf52ffff]
May 26 20:22:52 archw201 kernel: [mem 0xcf52d000-0xcf52ffff] page 4k
May 26 20:22:52 archw201 kernel: Security Framework initialized
May 26 20:22:52 archw201 kernel: AppArmor: AppArmor disabled by boot time parameter
May 26 20:22:52 archw201 kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
May 26 20:22:52 archw201 kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
May 26 20:22:52 archw201 kernel: Mount-cache hash table entries: 256
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys cpuacct
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys memory
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys devices
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys freezer
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys net_cls
May 26 20:22:52 archw201 kernel: Initializing cgroup subsys blkio
May 26 20:22:52 archw201 kernel: CPU: Physical Processor ID: 0
May 26 20:22:52 archw201 kernel: CPU: Processor Core ID: 0
May 26 20:22:52 archw201 kernel: [117B blob data]
May 26 20:22:52 archw201 kernel: mce: CPU supports 9 MCE banks
May 26 20:22:52 archw201 kernel: CPU0: Thermal monitoring enabled (TM1)
May 26 20:22:52 archw201 kernel: [117B blob data]
May 26 20:22:52 archw201 kernel: Freeing SMP alternatives: 20k freed
May 26 20:22:52 archw201 kernel: ACPI: Core revision 20130117
May 26 20:22:52 archw201 kernel: ACPI: All ACPI Tables successfully acquired
May 26 20:22:52 archw201 kernel: ftrace: allocating 19546 entries in 77 pages
May 26 20:22:52 archw201 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May 26 20:22:52 archw201 kernel: smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
May 26 20:22:52 archw201 kernel: TSC deadline timer enabled
May 26 20:22:52 archw201 kernel: Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
May 26 20:22:52 archw201 kernel: perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
May 26 20:22:52 archw201 kernel: ... version: 3
May 26 20:22:52 archw201 kernel: ... bit width: 48
May 26 20:22:52 archw201 kernel: ... generic registers: 8
May 26 20:22:52 archw201 kernel: ... value mask: 0000ffffffffffff
May 26 20:22:52 archw201 kernel: ... max period: 000000007fffffff
May 26 20:22:52 archw201 kernel: ... fixed-purpose events: 3
May 26 20:22:52 archw201 kernel: ... event mask: 00000007000000ff
May 26 20:22:52 archw201 kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
May 26 20:22:52 archw201 kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
May 26 20:22:52 archw201 kernel: Brought up 4 CPUs
May 26 20:22:52 archw201 kernel: smpboot: Total of 4 processors activated (24752.20 BogoMIPS)
May 26 20:22:52 archw201 kernel: devtmpfs: initialized
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf3e1000-0xcf428fff] (294912 bytes)
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf437000-0xcf437fff] (4096 bytes)
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf458000-0xcf479fff] (139264 bytes)
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf501000-0xcf501fff] (4096 bytes)
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf514000-0xcf51efff] (45056 bytes)
May 26 20:22:52 archw201 kernel: PM: Registering ACPI NVS region [mem 0xcf530000-0xcf572fff] (274432 bytes)
May 26 20:22:52 archw201 kernel: reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
May 26 20:22:52 archw201 kernel: RTC time: 0:22:48, date: 05/27/13
May 26 20:22:52 archw201 kernel: NET: Registered protocol family 16
May 26 20:22:52 archw201 kernel: ACPI: bus type PCI registered
May 26 20:22:52 archw201 kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
May 26 20:22:52 archw201 kernel: PCI: not using MMCONFIG
May 26 20:22:52 archw201 kernel: PCI: Using configuration type 1 for base access
May 26 20:22:52 archw201 kernel: bio: create slab <bio-0> at 0
May 26 20:22:52 archw201 kernel: ACPI: Added _OSI(Module Device)
May 26 20:22:52 archw201 kernel: ACPI: Added _OSI(Processor Device)
May 26 20:22:52 archw201 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
May 26 20:22:52 archw201 kernel: ACPI: Added _OSI(Processor Aggregator Device)
May 26 20:22:52 archw201 kernel: ACPI: EC: Look up EC in DSDT
May 26 20:22:52 archw201 kernel: ACPI: Executed 1 blocks of module-level executable AML code
May 26 20:22:52 archw201 kernel: ACPI: SSDT 00000000cf515c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: Dynamic OEM Table Load:
May 26 20:22:52 archw201 kernel: ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: SSDT 00000000cf516e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: Dynamic OEM Table Load:
May 26 20:22:52 archw201 kernel: ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
May 26 20:22:52 archw201 kernel: ACPI: Interpreter enabled
May 26 20:22:52 archw201 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
May 26 20:22:52 archw201 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
May 26 20:22:52 archw201 kernel: ACPI: (supports S0 S3 S4 S5)
May 26 20:22:52 archw201 kernel: ACPI: Using IOAPIC for interrupt routing
May 26 20:22:52 archw201 kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
May 26 20:22:52 archw201 kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
May 26 20:22:52 archw201 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 26 20:22:52 archw201 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
May 26 20:22:52 archw201 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
May 26 20:22:52 archw201 kernel: PCI host bridge to bus 0000:00
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
May 26 20:22:52 archw201 kernel: pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
May 26 20:22:52 archw201 kernel: pci 0000:00:16.0: reg 10: [mem 0xfe72a000-0xfe72a00f 64bit]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: reg 10: [io 0xf0f0-0xf0f7]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: reg 14: [io 0xf0e0-0xf0e3]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: reg 18: [io 0xf0d0-0xf0d7]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: reg 1c: [io 0xf0c0-0xf0c3]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.2: reg 20: [io 0xf0b0-0xf0bf]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
May 26 20:22:52 archw201 kernel: pci 0000:00:16.3: reg 10: [io 0xf0a0-0xf0a7]
May 26 20:22:52 archw201 kernel: pci 0000:00:16.3: reg 14: [mem 0xfe729000-0xfe729fff]
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: reg 10: [mem 0xfe700000-0xfe71ffff]
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: reg 14: [mem 0xfe728000-0xfe728fff]
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:19.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
May 26 20:22:52 archw201 kernel: pci 0000:00:1a.0: reg 10: [mem 0xfe727000-0xfe7273ff]
May 26 20:22:52 archw201 kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
May 26 20:22:52 archw201 kernel: pci 0000:00:1b.0: reg 10: [mem 0xfe720000-0xfe723fff 64bit]
May 26 20:22:52 archw201 kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.4: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.6: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.7: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
May 26 20:22:52 archw201 kernel: pci 0000:00:1d.0: reg 10: [mem 0xfe726000-0xfe7263ff]
May 26 20:22:52 archw201 kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
May 26 20:22:52 archw201 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: reg 24: [mem 0xfe725000-0xfe7257ff]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.2: PME# supported from D3hot
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.3: reg 10: [mem 0xfe724000-0xfe7240ff 64bit]
May 26 20:22:52 archw201 kernel: pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.0: supports D1 D2
May 26 20:22:52 archw201 kernel: pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
May 26 20:22:52 archw201 kernel: pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
May 26 20:22:52 archw201 kernel: pci 0000:01:00.1: supports D1 D2
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.6: PCI bridge to [bus 04]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.7: PCI bridge to [bus 05]
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
May 26 20:22:52 archw201 kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
May 26 20:22:52 archw201 kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
May 26 20:22:52 archw201 kernel: ACPI: Enabled 3 GPEs in block 00 to 3F
May 26 20:22:52 archw201 kernel: acpi root: \_SB_.PCI0 notify handler is installed
May 26 20:22:52 archw201 kernel: Found 1 acpi root devices
May 26 20:22:52 archw201 kernel: ACPI: No dock devices found.
May 26 20:22:52 archw201 kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
May 26 20:22:52 archw201 kernel: vgaarb: loaded
May 26 20:22:52 archw201 kernel: vgaarb: bridge control possible 0000:01:00.0
May 26 20:22:52 archw201 kernel: PCI: Using ACPI for IRQ routing
May 26 20:22:52 archw201 kernel: PCI: pci_cache_line_size set to 64 bytes
May 26 20:22:52 archw201 kernel: e820: reserve RAM buffer [mem 0xcf3e1000-0xcfffffff]
May 26 20:22:52 archw201 kernel: e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
May 26 20:22:52 archw201 kernel: e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
May 26 20:22:52 archw201 kernel: NetLabel: Initializing
May 26 20:22:52 archw201 kernel: NetLabel: domain hash size = 128
May 26 20:22:52 archw201 kernel: NetLabel: protocols = UNLABELED CIPSOv4
May 26 20:22:52 archw201 kernel: NetLabel: unlabeled traffic allowed by default
May 26 20:22:52 archw201 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
May 26 20:22:52 archw201 kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
May 26 20:22:52 archw201 kernel: Switching to clocksource hpet
May 26 20:22:52 archw201 kernel: pnp: PnP ACPI init
May 26 20:22:52 archw201 kernel: ACPI: bus type PNP registered
May 26 20:22:52 archw201 kernel: system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
May 26 20:22:52 archw201 kernel: system 00:01: [io 0x0620-0x063f] has been reserved
May 26 20:22:52 archw201 kernel: system 00:01: [io 0x0610-0x061f] has been reserved
May 26 20:22:52 archw201 kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
May 26 20:22:52 archw201 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
May 26 20:22:52 archw201 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
May 26 20:22:52 archw201 kernel: pnp 00:04: [dma 0 disabled]
May 26 20:22:52 archw201 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
May 26 20:22:52 archw201 kernel: pnp 00:05: [dma 4]
May 26 20:22:52 archw201 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
May 26 20:22:52 archw201 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
May 26 20:22:52 archw201 kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
May 26 20:22:52 archw201 kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
May 26 20:22:52 archw201 kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
May 26 20:22:52 archw201 kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
May 26 20:22:52 archw201 kernel: pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
May 26 20:22:52 archw201 kernel: system 00:0b: [io 0x0400-0x0453] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [io 0x0458-0x047f] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [io 0x1180-0x119f] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [io 0x0500-0x057f] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
May 26 20:22:52 archw201 kernel: system 00:0c: [io 0x0454-0x0457] has been reserved
May 26 20:22:52 archw201 kernel: system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
May 26 20:22:52 archw201 kernel: pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
May 26 20:22:52 archw201 kernel: pnp: PnP ACPI: found 14 devices
May 26 20:22:52 archw201 kernel: ACPI: bus type PNP unregistered
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
May 26 20:22:52 archw201 kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.6: PCI bridge to [bus 04]
May 26 20:22:52 archw201 kernel: pci 0000:00:1c.7: PCI bridge to [bus 05]
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: PCI bridge to [bus 06]
May 26 20:22:52 archw201 kernel: pci 0000:00:1e.0: setting latency timer to 64
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
May 26 20:22:52 archw201 kernel: pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
May 26 20:22:52 archw201 kernel: NET: Registered protocol family 2
Ma
Maybe you are looking for
-
Is there anyway to use SSO to authenticate someone straight into a database. I used the information here: http://www.oracle.com/technology/oramag/webcolumns/2003/techarticles/bennett_php.html to authenticate the person, but what if I need to access a
-
Multiple receivers for same rfc msg type
I have a soap-XI-RFC scenario. I have to read the soap message and depending on the key field value, I have to send to two different SAP systems. For EX: Input Message: <input_msgType> <item> <Key>ABC-123452</Key> <value>test1</value>
-
Smart Shapes flashing during effects
I have a series of cascading animations of Smart shapes. Let's call them one through ten. All have alpha 0% to 100% and fly-in effects applied. During the animation of shape one, shape two will appear for a brief flash and then disappear. During the
-
To Whom It May Concern, I have a MacBook Air, Ipad 2 everything was fine. Then I upgraded it to OS X Yosemite , everything when downhill, can not even use FaceTime . i have tried everything. Can somebody help me out on this please. Thank you.
-
Hi Experts, I need to fetch CRM contract data to ISU systems. As I have been told to use CRM_ORDER_READ to get the appropriate data in ISU system. But the FM mentioned above is not an RFC. Hence I am unable to call the above FM from ISU. Is there any