Arch with broadcom wireless, etc (Dell N5010)

I have a dell N5010, as seen here http://www.dell.com/us/p/inspiron-15r/pd i have used both ubuntu and fedora on it, so i know linux will run on it, and wireless will work, but is there any written procedures i need to follow to get broadcom working with arch/does anyone know of other issues with this model? Thanks for all help.

Hello,
yes, there is: https://wiki.archlinux.org/index.php/Broadcom_wireless
This first part should get your card running. You'll also need to manage your connections. There's also a written wiki article for that: https://wiki.archlinux.org/index.php/Wl … management
Have fun!

Similar Messages

  • Installing Arch with intel wireless (iwlwifi-3945)

    i have tried various times in the past few weeks to install arch with minimal success.  The only time i was able to actually set up a system that would allow me to get to a gui and use the internet was when i had an install of Archie Linux (Live CD)  that i had to chroot with kubuntu to add wireless support.  Needless to say i preferred a cleaner install (especially after having to manually rename the folders, etc. for the repository changes).
    Anyways when arch is loading it makes mention of needing to append the boot image to include intel-wireless.  i was wondering what exactly was involved in doing that.  Because after trying to just install the package ifconfig does not show my wlan device.  Any help is appreciated.  let me know if more info is needed.

    pl2lnce wrote:
    i have tried various times in the past few weeks to install arch with minimal success.  The only time i was able to actually set up a system that would allow me to get to a gui and use the internet was when i had an install of Archie Linux (Live CD)  that i had to chroot with kubuntu to add wireless support.  Needless to say i preferred a cleaner install (especially after having to manually rename the folders, etc. for the repository changes).
    Anyways when arch is loading it makes mention of needing to append the boot image to include intel-wireless.  i was wondering what exactly was involved in doing that.  Because after trying to just install the package ifconfig does not show my wlan device.  Any help is appreciated.  let me know if more info is needed.
    I have Arch with iwl3945 drivers running here just fine. No tweaks to the cpio image needed.
    I have never heard of this either... You need both the drivers and the firmware. Check dmesg if everything is okay. Ifconfig -a should show a wlan0 device, if not, something went wrong.
    broch wrote:I have HP dv5000t (dualcore) with the same card. Never had any problems with intel 3945. However I am using ipw3945 instead of iwl3945 as the later is still early beta and far from stability, performance of ipw.
    Since 1.1.0 stability is just fine. Throughput is still a problem though. I get like 2.8 MBps with earlier versions, and the 1.1.21 one can hit it too, but mostly it's around 1 MBps . I prefer that to yet another proprietary package though. It's not every day I transfer a few GB to my wired server .
    Last edited by B (2007-11-15 18:12:18)

  • Possible to install arch on a system with Broadcom wireless?

    My netbook has a broadcom BCM4313 chipset. Kernel module: brcmsmac. The latest arch installer can't properly configure my network and I don't have a wired connection at this location. The system keeps spamming messages like this on the terminal every few seconds:
    ieee80211 phy1: wl_ops_bbs_info_changed: qos enabled: false (implement)
    ieee80211 phy1: brcmsmac: wl_ops_bss_info_changed: disassociated
    ieee80211 phy1: wl_ops_bbs_info_changed: arp filtering: enabled false, count 0 (implement)
    Is it even possible to install arch linux on a system with a broadcom chipset? Or is the kernel too old, should I use another module?
    Thanks for your help!

    treadlefish could you post the wifi info from "lspci -vnn"? Then I can check if we have the same card.
    edit, here is mine:
    03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:1795]
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [58] Vendor Specific Information: Len=78 <?>
    Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [d0] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [13c] Virtual Channel
    Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
    Capabilities: [16c] Power Budgeting <?>
    Kernel driver in use: wl
    Last edited by Wilco (2012-02-27 22:03:37)

  • Problems with Broadcom wireless card after Kernel Upgrade

    After upgrading to version 2.6.39 of the linux kernel, I am having trouble with my Broadcom BCM4312 wireless card. The broadcom-wl driver no longer seems to work, even after reinstalling it from the AUR. The b43 driver seems to be able to connect to unencrypted networks, but can no longer connect to my family's WPA Personal encrypted router. Is anybody else having a similar problem?

    As I understand it my laptop has been fine and it uses broadcom-wl, and I just re-yaourt it each time my kernel version changes using a cable in my router. But I believe there is something called dkms and a version of the driver for it, which (I haven't read fully into it) is something like a separate tree, which can (from what little I've read) eliminate this need to recompile every time, however I literally read this 5 minutes ago, from the AUR page for broadcom-wl and a quick google so I wouldn't be surprised if there is more to it than that.

  • [SOLVED kinda]Yet another Broadcom wireless problem - scanning

    Use an old Gateway laptop with a wireless card to provide internet through NAT to my desktop computer that isn't nearby my switch.  I was doing this for the longest time using WinXP on the Gateway, but since all my other computers are now running linux, I figured, hey, why not put a really sleek and sexy copy of Arch onto the Gateway, and free up some of that HD space for easier file sharing between the desktop and the rest of the network.  So I installed Arch, and have run head first into how much Arch and Broadcom wireless devices do not play well together.  Have spent all my time since then searching the forums, the wiki, etc, but to no avail.  So going to just go ahead and finally make my own call for help via the forums here. 
    I've only ever ONCE seen a scan find a wireless network, and that was after my first reboot after installing arch.  That was the only time. There are at all times 2-4 wireless networks in range of this computer.  I'm currently on my netbook running Ubuntu to post this (typing everything in by hand, ugh), and can see 4 networks right now.  The Arch laptop can't find any.
    To start off with:  I have read the wikis.  I have searched the forums.  I HAVE INSTALLED THE FIRMWARE.  I've checked to make sure my card is supported, and the driver it uses is the b43, and is not supposed to be compatible with the wl driver.  This is the cardbus Linksys WPC54G v1 card.  I know the card itself works.
    Here's the various data I'm sure will be requested of me at one point or another.  This is all taken immediately after booting.
    What can I try.  I've probably already tried it, but I'm willing to walk through step by step with someone if they think they can help.
    lspci -vnn
    03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
    Subsystem: Linksys WPC54G v1 / WPC54GS v1 802.11g Wireless-G Notebook Adapter [1737:4320]
    Flags: bus master, fast devsel, latency 64, IRQ 10
    Memory at 48000000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: [40] Power Management version 2
    Kernel driver in use: b43-pci-bridge
    Immediately after boot if I run
    dmesg (related info)
    [ 7.760803] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
    [ 7.769836] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    [ 7.760856] b43-pci-bridge 0000:03:00.0: settling latency timer to 64
    [ 8.217173] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
    [ 8.276959] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 8.278657] Registered led device: b43-phy0::tx
    [ 8.278721] Registered led device: b43-phy0::rx
    [ 8.278788] Registered led device: b43-phy0::radio
    [ 8.278831] Broadcom 43xx driver loaded [ Features: PMNLS ]
    [ 43.860080] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
    [ 43.921388] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    uname -a
    Linux oms-gateway 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:10:44 UTC 2012 i686 Intel(R) Pentium(R) III Mobile CPU 1066MHz GenuineIntel GNU/Linux
    Kernel version greater than 3.2 should be able to use the version 5.100.138 Broadcom drivers.
    ifconfig wlan0
    wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 metric 1
    ether 00:0f:66:2e:b0:83 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 btes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    iwconfig wlan0
    wlan0 IEEE 802.11bg ESSID:off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    lsmod | grep b43
    b43 317649 0
    mac80211 203227 1 b43
    cfg80211 147716 2 mac80211,b43
    ssb 42035 1 b43
    mmc_core 71470 2 ssb,b43
    pcmcia 31502 2 ssb,b43
    iwlist wlan0 scan
    wlan0 No scan results
    Last edited by oldmansutton (2012-03-11 01:53:50)

    oldmansutton wrote:
    Strike0 wrote:Whether rev 3 needs legacy or not is controversial. I assume you blacklisted b43 when trying legacy?
    How about any need to blacklist when you need b43. Anything suspicious around in lsmod?
    with b43, you can see me previous lsmod on the original post.
    with b43legacy, the only related things I see from lsmod are b43legacy, mac80211, cfg80211, and ssb.
    Wait.  Hmmm....
    rmmod b43
    modprobe b43legacy
    rmmod b43legacy
    modprobe b43
    lsmod |grep b43
    Now bcma is showing up.  But it didn't before.  It just started showing up with b43 since I did the compat-wireless package.  But seeing as I'm getting scans SOMETIMES now, I hesitate to call it a problem.  Maybe?
    Any other ideas?
    It can scan ONCE.  The b43 driver is obviously functional at least for a bit.
    Standard network service, wicd, netcfg, etc, I've tried them all.  Reinstalled from scratch twice.  Looking for NEW ideas basically.  I've read just about every single post about every broadcom chipset out there.  I just happen to have one of these rare ones apparently.
    Last edited by oldmansutton (2012-03-10 17:46:59)

  • Install SUN Solaris 10 X86 in Dell Optiplex 620 with Broadcom 5751 NIC

    I shall be very grateful if any one would offer his/her advice of the followings:
    1) How do I copy a img file, i.e bcmedu.img which file size is
    1.47MB to a 1.44 diskette when the PC is unable to
    connect to network?
    2) Where can I get a copy of the driver for bcme.bef to be
    install in DELL Optiplex 620 with Broadcom 5751 NIC?
    3) Is there a way to install NIC driver through other media other than diskette in Device Configuration Assistant?
    Note: I have followed the Installation and Configuration Guide provided by SUN and Boardcom but has yet to make the network card detected despited I have been re-installed the OS many times.
    Your great help is much appreciated.
    Regards,
    swee

    i was facing the same problem just hours ago.
    i successfully installed broadcom driver into solaris 10 with Dell GX280
    i copy broadcom driver into a CD and run it on solaris pc.
    i copied out the file into a directory and use pkgadd -d BRCMbcme.pkg and voila. My pc detected the network card.
    Then start configuring your network.
    It works for me. Hope it works for u.
    remember to read the readme file which come with the broadcom driver.

  • Set up 2 tb new time capsule for wifi with apple tv. etc. and wireless backup without any internet....

    My title says it all, I have the 2 tb time capsule with no internet at this time. Goal is to create a wifi to be able to use my MAC (OS 10.86) with my wireless printer, apple tv, and to back up data and use time machine all wirelessly. Please take me through the steps needed to make this happen.....

    How do you get internet??
    I understand that the TC is not going to be part of that but it still matters how you get internet.
    The setup is basically very simple.. The TC still needs to be in router mode.. ie on the network tab it should say dhcp and nat. You will get several errors .. ignore them.. that is because there is no WAN connection.
    That is all that is needed.. You can then connect everything via wireless and it will create a network where each device has connectivity to the others.. just no internet.

  • [SOLVED] not sure where i'm going wrong with broadcom-wl drivers...

    so I have this really old laptop (hp dv2310 I think is the exact number) that I thought would be cool to throw arch on.
    Which of course, it is.
    the problem of course is the awful freakin' driver the broadcom wireless card needs. Let me preface by saying I'm somewhat new to linux
    ok, so, I found this post http://zeroincrement.wordpress.com/2009 … -linux-os/ and followed the directions to the end. it seemed like a good solution considering that was the driver that https://wiki.archlinux.org/index.php/Broadcom_wireless said I needed.
    But after I insmod wl.ko and blacklisted b43 and ssb (as per a notice I found after I makepkg) my wlan0 dissapeared from iwconfig..
    /FACEPALM
    Does anyone have experience with this card? please help me out. this whole thing is really getting me down lol. honestly I don't know where to go from here. I was already waaay over my head as it was lol, but it's a laptop...I can't be tethered down to a desk...i'd rather use my desktop.
    Last edited by hypn0tic (2011-04-16 20:37:26)

    Sorry, I was not clear.  You have version 14 which is greater than 13, so you should be good to go.
    Now, just:
    change to a working directory of your choice.  Then:
    wget http://aur.archlinux.org/packages/b43-firmware/b43-firmware.tar.gz
    tar -xvf b43-firmware.tar.gz
    cd b43-firmware
    makepkg
    sudo pacman -U b43-firmware-4.178.10.4-1-x86_64.pkg.tar.xz
    Here is how it looks on my system.  Of course, you will answer 'y' to the install question instead of my 'n'
    ewaller@odin:~ 1001 %wget http://aur.archlinux.org/packages/b43-firmware/b43-firmware.tar.gz
    --2011-04-16 08:49:35-- http://aur.archlinux.org/packages/b43-firmware/b43-firmware.tar.gz
    Resolving aur.archlinux.org... 208.92.232.29
    Connecting to aur.archlinux.org|208.92.232.29|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 692 [application/x-tgz]
    Saving to: “b43-firmware.tar.gz”
    100%[======================================>] 692 --.-K/s in 0s
    2011-04-16 08:49:35 (33.0 MB/s) - “b43-firmware.tar.gz” saved [692/692]
    ewaller@odin:~ 1002 %tar -xvf b43-firmware.tar.gz
    b43-firmware/
    b43-firmware/PKGBUILD
    ewaller@odin:~ 1003 %cd b43-firmware
    ewaller@odin:~/b43-firmware 1004 %makepkg
    ==> Making package: b43-firmware 4.178.10.4-1 (Sat Apr 16 08:50:03 PDT 2011)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Downloading broadcom-wl-4.178.10.4.tar.bz2...
    --2011-04-16 08:50:03-- http://mirror2.openwrt.org/sources/broadcom-wl-4.178.10.4.tar.bz2
    Resolving mirror2.openwrt.org... 46.4.11.11
    Connecting to mirror2.openwrt.org|46.4.11.11|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 5986780 (5.7M) [application/x-bzip2]
    Saving to: “broadcom-wl-4.178.10.4.tar.bz2.part”
    100%[======================================>] 5,986,780 625K/s in 11s
    2011-04-16 08:50:14 (557 KB/s) - “broadcom-wl-4.178.10.4.tar.bz2.part” saved [5986780/5986780]
    ==> Validating source files with sha1sums...
    broadcom-wl-4.178.10.4.tar.bz2 ... Passed
    ==> Extracting Sources...
    -> Extracting broadcom-wl-4.178.10.4.tar.bz2 with bsdtar
    ==> Starting build()...
    ==> Entering fakeroot environment...
    ==> Starting package()...
    This file is recognised as:
    ID : FW15
    filename : wl_apsta.o
    version : 478.104
    MD5 : bb8537e3204a1ea5903fe3e66b5e2763
    Extracting b43/ucode5.fw
    Extracting b43/pcm5.fw
    Extracting b43/b0g0bsinitvals5.fw
    Extracting b43/a0g0bsinitvals5.fw
    Extracting b43/b0g0initvals5.fw
    Extracting b43/a0g1initvals5.fw
    Extracting b43/a0g0initvals5.fw
    Extracting b43/a0g1bsinitvals5.fw
    Extracting b43/ucode9.fw
    Extracting b43/a0g1initvals9.fw
    Extracting b43/a0g0bsinitvals9.fw
    Extracting b43/b0g0bsinitvals9.fw
    Extracting b43/b0g0initvals9.fw
    Extracting b43/a0g1bsinitvals9.fw
    Extracting b43/a0g0initvals9.fw
    Extracting b43/ucode11.fw
    Extracting b43/n0bsinitvals11.fw
    Extracting b43/n0absinitvals11.fw
    Extracting b43/n0initvals11.fw
    Extracting b43/ucode13.fw
    Extracting b43/b0g0initvals13.fw
    Extracting b43/a0g1bsinitvals13.fw
    Extracting b43/a0g1initvals13.fw
    Extracting b43/lp0bsinitvals13.fw
    Extracting b43/b0g0bsinitvals13.fw
    Extracting b43/lp0initvals13.fw
    Extracting b43/ucode14.fw
    Extracting b43/lp0initvals14.fw
    Extracting b43/lp0bsinitvals14.fw
    Extracting b43/ucode15.fw
    Extracting b43/lp0bsinitvals15.fw
    Extracting b43/lp0initvals15.fw
    Extracting b43/ucode16.fw
    Extracting b43/n0bsinitvals16.fw
    Extracting b43/sslpn0initvals16.fw
    Extracting b43/n0initvals16.fw
    Extracting b43/lp0initvals16.fw
    Extracting b43/sslpn0bsinitvals16.fw
    Extracting b43/lp0bsinitvals16.fw
    ==> You should also add 'b43' into the 'modules' section of your '/etc/rc.conf' file.
    ==> Tidying install...
    -> Purging other files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    -> Removing empty directories...
    ==> Creating package...
    -> Generating .PKGINFO file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: b43-firmware 4.178.10.4-1 (Sat Apr 16 08:50:18 PDT 2011)
    ewaller@odin:~/b43-firmware 1005 %pacman -U b43-firmware-4.178.10.4-1-x86_64.pkg.tar.xz
    error: you cannot perform this operation unless you are root.
    ewaller@odin:~/b43-firmware[1] 1006 %sudo pacman -U b43-firmware-4.178.10.4-1-x86_64.pkg.tar.xz
    Password:
    warning: b43-firmware-4.178.10.4-1 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): b43-firmware-4.178.10.4-1
    Total Download Size: 0.00 MB
    Total Installed Size: 0.36 MB
    Proceed with installation? [Y/n] n
    ewaller@odin:~/b43-firmware 1007 %

  • [SOLVED] Kernel 2.6.38 disables Broadcom Wireless driver

    I installed Arch with kernel26 version 2.6.34 (with same kernel26-headers version), built the module for my broadcom (4312 - broadcom-wl driver), and eventually got wireless internet capability. However, after upgrading the kernel version to 2.6.38, while trying to load my driver I get the error "Module wl not found." Moving the wl.ko module file into the correct directory for the new kernel drivers, I get the message "invalid module format." So I tried rebuilding the module, but I now receive the error "error: implicit declaration of function 'init_MUTEX'" during the build process.
    I have tried downgrading the kernel back to 2.6.34 and I can get wireless after rebuilding the module. But is there is any way right now for me to use the newest kernel26 version AND have my wireless driver working?
    Last edited by MrSpecial (2011-05-06 06:16:52)

    oh, sorry, I forgot to mention that you had to get it from AUR (thought it was obvious, didn't see you post count, you must be relatively new to arch, welcome)
    *Always* use the AUR package if there's one available. It will work most of the time (some of them are outdated and will fail to build).
    *Always* use pacman to install stuff. Personally, I've almost never installed from source. If something is not in AUR or the AUR package does not build, it's always better to write your own PKGBUILD to install stuff. This way you're sure that:
    1) you won't overwrite an existing system (or not system) file
    2) you can uninstall the package completely and cleanly with a pacman -R
    Sticking to that principles, I haven't had to re-install my system for the past 2 years...

  • BROADCOM Wireless device name switch

    Hi all,
    i have a broadcom wireless card,
    i installed it using instruction on the wiki, and it works fine, 
    se i have the problem of interfaces swapping every time, i read the solution in the wiki.
    But it seems to don't work.
    In fact i edited the file /etc/udev/rules.d/10-network.rules
    with that:
    SUBSYSTEM=="net", ATTR{address}=="00:22:64:7F:E8:7C", NAME="eth0"
    SUBSYSTEM=="net", ATTR{address}=="00:21:00:9B:3C:6D", NAME="eth1"
    but it seems to ignore it!!!!
    I have the interfaces swapped every time.
    (i had a similar problem with other udev rules, seems that every rules that i writ is ignored!!!)
    Any idea?
    Last edited by finarfin (2011-01-30 13:16:20)

    Here is my situation, i have the following rules in /etc/udev/rules.d:
    -rw-r--r-- 1 root root 104 Oct 26 05:39 10-cups-usb.rules
    -rw-r--r-- 1 root root 132 Jan 30 20:10 10-network.rules
    -rw-r--r-- 1 root root 462 Jan 3 23:14 75-cd-aliases-generator.rules.optional
    -rw-r--r-- 1 root root 3981 Jan 3 23:14 75-persistent-net-generator.rules.optional
    The rule 10-network.rules is the one that i created following the example on the wiki.
    here is the code:
    SUBSYSTEM=="net", ATTR{address}=="00:22:64:7f:e8:7c", NAME="eth1"
    SUBSYSTEM=="net", ATTR{address}=="00:21:00:9b:3c:6d", NAME="eth0"
    And the actual ifconfig is:
    eth0 Link encap:Ethernet HWaddr 00:21:00:9B:3C:6D
    inet addr:192.168.1.237 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::221:ff:fe9b:3c6d/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:24016 errors:0 dropped:0 overruns:0 frame:2481
    TX packets:16701 errors:6 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:30104092 (28.7 Mb) TX bytes:1935694 (1.8 Mb)
    Interrupt:17
    eth1 Link encap:Ethernet HWaddr 00:22:64:7F:E8:7C
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:16
    As you can see the two device are switched.
    Maybe the rule should have the executable flag set?

  • Broadcom Wireless Woes

    I think I have all relevant information in the link below, please let me know if there's anything you can think of, or some other useful information I should display. I have got this card working on arch/other distros before, but it's a struggle every time. Thanks
    http://pastebin.com/SrghpUip

    Thanks for the replies everyone.
    I switched to the b43 driver, at the advice of Trilby. Now, I have been able to see wireless networks, but intermittently. I will run a scan with iwlist, or networkmanager, and will see networks, but running that same scan 2 minutes later and no dice. Not sure of the cause of the intermittent behaviour. I have never had wicd see a network, but I dont know if thats something with my card and wicd, or just a biproduct of the intermittent results.
    Also, http://wireless.kernel.org/en/users/Dri … _b43legacy lists my card as being only partially supported, which is why I went with broadcom-wl initially. I didn't see where I could find what wasn't supported with this card.
    Here are another round of scans/logs/information. Appreciate any further advice
    pacman -Q | grep b43
    b43-firmware 5.100.138-2
    b43-fwcutter 018-1
    lspci -vnn
    04:02.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11b/g/n [14e4:4329] (rev 01)
    Subsystem: Netgear WN311B RangeMax Next 270 Mbps Wireless PCI Adapter [1385:7d00]
    Flags: bus master, fast devsel, latency 64, IRQ 17
    Memory at f7ffc000 (32-bit, non-prefetchable) [size=16K]
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb
    ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether e0:cb:4e:b9:05:1e brd ff:ff:ff:ff:ff:ff
    3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000
    link/ether c0:3f:0e:bd:89:df brd ff:ff:ff:ff:ff:ff
    At this point, I saw wlan0 state as being down, so I ran ip link set wlan0 up, which returned back successfully, or at least without an error. However, re running ip link, the adapter state remained down.
    iwconfig
    lo no wireless extensions.
    enp2s0 no wireless extensions.
    wlan0 IEEE 802.11bg ESSID:off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=27 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    iwlist wlan0 scan
    wlan0 Scan completed :
    Cell 01 - Address: 20:10:7A:06:FA:AB
    Channel:1
    Frequency:2.412 GHz (Channel 1)
    Quality=41/70 Signal level=-69 dBm
    Encryption key:on
    ESSID:"Pretty Fly For A Wifi"
    ... More to that network, as well as other seen networks. Didn't want to post all. Seemed redundant. Running that same command 2 minutes later, no networks found.
    dmesg | grep b43
    [ 2.668274] b43-phy0: Broadcom 4321 WLAN found (core revision 11)
    [ 2.703956] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 1
    [ 3.297283] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
    [ 3.384399] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
    [ 3.384403] b43-phy0 ERROR: This device does not support DMA on your system. It will now be switched to PIO.
    [ 3.384405] b43-phy0: Controller RESET (DMA error) ...
    [ 3.587254] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
    [ 3.657348] b43-phy0 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
    [ 3.674913] b43-phy0: Controller restarted
    No idea what the fatal DMA error means, and if I should be concerned by it, or if PIO is ok/good enough..?
    Thanks, sorry for information overload, but more is probably better than less. Let me know. All comments appreciated.
    On a semi-related note, anyone have recommendations for a wireless-n card that works out of the box? PCI preferred, PCI-e and usb also accepted. Lol.

  • Broadcom wireless randomly stops working fifo 0: descriptor error

    Hey,
    Recently installed Arch and am having issues with the wireless. Broadcom BCM4313 controller, with brcm80211 module running successfully. I'm using wicd to control the network interface, but am noticing a number of problems.
    First, after switching from one AP to another, I will get a complete system freeze for maybe 30 seconds. Mouse and everything else stops responding, but I can see tasks in the background continue on slowly. After 30 seconds everything comes back up, but nothing weird in dmesg.
    Another one is  that sometimes the wireless will just flat-out die. I get the following:
    wl0: fifo 0: descriptor error
    wl0: fatal error, reinitializing
    This error repeats itself hundreds of times. Only thing I've been able to do is restart, which usually fixes it. I've tried bringing wlan0 down and up, unloading and reloading the modules, restarting wicd but none of that seems to help.
    Any help would be appreciated!

    Thanks, I've moved to wl for now. Will post there. Also found another problem, seems to be me with my atheros card:
    System freezes for a little bit, then this happens:
    Apr 27 20:42:30 localhost kernel: [ 171.346698] ------------[ cut here ]------------
    Apr 27 20:42:30 localhost kernel: [ 171.346722] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x20b/0x220()
    Apr 27 20:42:30 localhost kernel: [ 171.346731] Hardware name: AOD255E
    Apr 27 20:42:30 localhost kernel: [ 171.346738] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
    Apr 27 20:42:30 localhost kernel: [ 171.346745] Modules linked in: ndiswrapper ext2 nls_cp437 vfat fat snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss uvcvideo snd_mixer_oss videodev joydev snd_hda_codec_realtek i915 snd_hda_intel snd_hda_codec drm_kms_helper drm snd_hwdep snd_pcm intel_agp snd_timer sparse_keymap lib80211_crypt_tkip uhci_hcd rfkill wl(P) ehci_hcd i2c_algo_bit processor snd i2c_i801 thermal fan intel_gtt video battery usbcore ac button wmi soundcore snd_page_alloc i2c_core sg iTCO_wdt lib80211 agpgart iTCO_vendor_support atl1c serio_raw pcspkr evdev psmouse ext4 mbcache jbd2 crc16 sd_mod ahci libahci libata scsi_mod
    Apr 27 20:42:30 localhost kernel: [ 171.346856] Pid: 0, comm: kworker/0:0 Tainted: P 2.6.38-ARCH #1
    Apr 27 20:42:30 localhost kernel: [ 171.346860] Call Trace:
    Apr 27 20:42:30 localhost kernel: [ 171.346872] [<c104428d>] ? warn_slowpath_common+0x6d/0xa0
    Apr 27 20:42:30 localhost kernel: [ 171.346880] [<c129568b>] ? dev_watchdog+0x20b/0x220
    Apr 27 20:42:30 localhost kernel: [ 171.346887] [<c129568b>] ? dev_watchdog+0x20b/0x220
    Apr 27 20:42:30 localhost kernel: [ 171.346894] [<c104433e>] ? warn_slowpath_fmt+0x2e/0x30
    Apr 27 20:42:30 localhost kernel: [ 171.346902] [<c129568b>] ? dev_watchdog+0x20b/0x220
    Apr 27 20:42:30 localhost kernel: [ 171.346910] [<c105a47a>] ? insert_work+0x5a/0x60
    Apr 27 20:42:30 localhost kernel: [ 171.346917] [<c105bb3f>] ? __queue_work+0xcf/0x3c0
    Apr 27 20:42:30 localhost kernel: [ 171.346926] [<c1051a27>] ? run_timer_softirq+0xe7/0x360
    Apr 27 20:42:30 localhost kernel: [ 171.346934] [<c103d349>] ? rebalance_domains+0x89/0x150
    Apr 27 20:42:30 localhost kernel: [ 171.346942] [<c1295480>] ? dev_watchdog+0x0/0x220
    Apr 27 20:42:30 localhost kernel: [ 171.346950] [<c104a910>] ? __do_softirq+0x0/0x1f0
    Apr 27 20:42:30 localhost kernel: [ 171.346956] [<c104a991>] ? __do_softirq+0x81/0x1f0
    Apr 27 20:42:30 localhost kernel: [ 171.346963] [<c104a910>] ? __do_softirq+0x0/0x1f0
    Apr 27 20:42:30 localhost kernel: [ 171.346968] <IRQ> [<c104abdd>] ? irq_exit+0x6d/0x70
    Apr 27 20:42:30 localhost kernel: [ 171.346980] [<c10059f6>] ? do_IRQ+0x46/0xb0
    Apr 27 20:42:30 localhost kernel: [ 171.346986] [<c104abc9>] ? irq_exit+0x59/0x70
    Apr 27 20:42:30 localhost kernel: [ 171.346993] [<c1003d70>] ? common_interrupt+0x30/0x38
    Apr 27 20:42:30 localhost kernel: [ 171.347001] [<c104007b>] ? sys_sched_rr_get_interval+0x8b/0xb0
    Apr 27 20:42:30 localhost kernel: [ 171.347010] [<c11e9392>] ? intel_idle+0xb2/0x100
    Apr 27 20:42:30 localhost kernel: [ 171.347018] [<c1260e89>] ? cpuidle_idle_call+0x79/0x2c0
    Apr 27 20:42:30 localhost kernel: [ 171.347025] [<c10021f6>] ? cpu_idle+0x86/0xc0
    Apr 27 20:42:30 localhost kernel: [ 171.347034] [<c130ed1a>] ? start_secondary+0x1de/0x1e4
    Apr 27 20:42:30 localhost kernel: [ 171.347040] ---[ end trace f98167a54aecdb42 ]---
    Wonder if this has anything to do with the other..

  • Tried every way to install my broadcom wireless card and failed

    Hello.. i asked this in the newbie section but didn't get any replies.. i really need help and i don't know where else to go.
    i have an hp dv2500 laptop with a Broadcom wireless card.. here is the output of lspci | grep -i net
    08:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
    at first, i tried getting it to work with the broadcom-wl driver from AUR as suggested by this wiki page: http://wiki.archlinux.org/index.php/Broadcom_BCM4312
    i followed all the steps.. however, i did get an error when i tried to exucute this line:
    insmod /lib/modules/2.6.30-ARCH/kernel/drivers/net/wireless/wl.ko
    and the error was:
    error inserting 'wl.ko': -1 File exists ...
    i continued despite this error and when i was done, i couldn't detect the card with iwconfig or wicd.. the modules named "wl" and "lib80211" are loaded but i still can't detect it..
    i uninstalled, re-installed and i got the same behaviour..
    so then i tried the BCM43xx driver as described here: http://wiki.archlinux.org/index.php/Wir … up#BCM43XX
    i unpacked the firmware and restarted but i still couldn't detect it.. and i couldn't load the bcm43xx module because arch says was not found..
    then i tried the driver after that "b43".. followed the steps on the wiki, restarted, and i still couldn't detect the card with iwconfig or wicd..
    i have been trying to get this to work for 3 days now.. i appreciate your time and help in this issue..
    thanks

    thanks for the reply tomk..
    so at least we limited the problem to using broadcom-wl..
    here is dmesg after modprobe -r wl
    Bluetooth: Generic Bluetooth USB driver ver 0.5
    usbcore: registered new interface driver btusb
    Adding 1895660k swap on /dev/sda4. Priority:-1 extents:1 across:1895660k
    forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
    Clocksource tsc unstable (delta = 4398045793691 ns)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    lib80211_crypt: unregistered algorithm 'NULL'
    and after modprobe wl:
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    i'm not that good with gnu/linux, so i'm not sure if something is wrong from these messages... do they point to anything?

  • [SOLVED]Driver of Broadcom wireless-bcm43142

    Hi
    First I am so sorry to open a new topic while there is one in https://bbs.archlinux.org/viewtopic.php … 5#p1308505. but due to the link is solved and its solutions could not solve my problem I had to open a new one.
    My problem is with my wireless device. Its driver is Broadcom wireless-bcm43142 I do not know why I cannot see my interface. The ip link gives me:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
        link/ether 20:1a:06:9c:67:19 brd ff:ff:ff:ff:ff:ff
    And the iwconfig gives me:
    enp3s0    no wireless extensions.
    lo        no wireless extensions.
    As you can see there is no wireless interface and wifi-menu (as root) gives:
    Invalid interface specification
    I have found no way to solve my problem.
    Is there any one can help me?
    Last edited by qaderzade (2014-12-18 10:03:35)

    aurabindo
    dmesg did not give me that " a lot of errors telling "Unknown symbols"", and you see its output in bellow.
    I recreated the ramdisk and reboot but still no difference.
    dmesg output is (a little long):
    # dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096aaffff] usable
    [    0.000000] BIOS-e820: [mem 0x0000000096ab0000-0x0000000097eaffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000097eb0000-0x000000009cabefff] usable
    [    0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
    [    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] SMBIOS 2.7 present.
    [    0.000000] DMI: LENOVO 20238/INVALID, BIOS 79CN46WW(V3.05) 12/23/2013
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] AGP: No AGP bridge found
    [    0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-E7FFF write-protect
    [    0.000000]   E8000-EFFFF write-combining
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0000000000 mask 7F80000000 write-back
    [    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
    [    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
    [    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
    [    0.000000]   4 base 00FF800000 mask 7FFF800000 write-protect
    [    0.000000]   5 base 0100000000 mask 7F00000000 write-back
    [    0.000000]   6 base 01DF600000 mask 7FFFE00000 uncachable
    [    0.000000]   7 base 01DF800000 mask 7FFF800000 uncachable
    [    0.000000]   8 base 01E0000000 mask 7FE0000000 uncachable
    [    0.000000]   9 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    [    0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    [    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
    [    0.000000]  [mem 0x1df400000-0x1df5fffff] page 2M
    [    0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
    [    0.000000]  [mem 0x1dc000000-0x1df3fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff]
    [    0.000000]  [mem 0x180000000-0x1bfffffff] page 1G
    [    0.000000]  [mem 0x1c0000000-0x1dbffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x96aaffff]
    [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
    [    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
    [    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
    [    0.000000]  [mem 0x80000000-0x969fffff] page 2M
    [    0.000000]  [mem 0x96a00000-0x96aaffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x97eb0000-0x9cabefff]
    [    0.000000]  [mem 0x97eb0000-0x97ffffff] page 4k
    [    0.000000]  [mem 0x98000000-0x9c9fffff] page 2M
    [    0.000000]  [mem 0x9ca00000-0x9cabefff] page 4k
    [    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [    0.000000]  [mem 0x9cfff000-0x9cffffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
    [    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
    [    0.000000] RAMDISK: [mem 0x37950000-0x37c9ffff]
    [    0.000000] ACPI: Early table checksum verification disabled
    [    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
    [    0.000000] ACPI: XSDT 0x000000009CFFE210 0000A4 (v01 LENOVO CB-01    00000001      01000013)
    [    0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: DSDT 0x000000009CFE9000 00AE0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: FACS 0x000000009CFBA000 000040
    [    0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFE6000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: BOOT 0x000000009CFE4000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: LPIT 0x000000009CFE3000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: ASPT 0x000000009CFE1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: DBGP 0x000000009CFE0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDF000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDE000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDA000 00348C (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
    [    0.000000]   NODE_DATA [mem 0x1df5f9000-0x1df5fcfff]
    [    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
    [    0.000000]   Normal   [mem 0x100000000-0x1df5fffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
    [    0.000000]   node   0: [mem 0x00100000-0x96aaffff]
    [    0.000000]   node   0: [mem 0x97eb0000-0x9cabefff]
    [    0.000000]   node   0: [mem 0x9cfff000-0x9cffffff]
    [    0.000000]   node   0: [mem 0x100000000-0x1df5fffff]
    [    0.000000] On node 0 totalpages: 1551452
    [    0.000000]   DMA zone: 64 pages used for memmap
    [    0.000000]   DMA zone: 21 pages reserved
    [    0.000000]   DMA zone: 3996 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 9883 pages used for memmap
    [    0.000000]   DMA32 zone: 632512 pages, LIFO batch:31
    [    0.000000]   Normal zone: 14296 pages used for memmap
    [    0.000000]   Normal zone: 914944 pages, LIFO batch:31
    [    0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [    0.000000] ACPI: PM-Timer IO Port: 0x1808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x96ab0000-0x97eaffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s82752 r8192 d23744 u262144
    [    0.000000] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1527188
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [    0.000000] AGP: Checking aperture...
    [    0.000000] AGP: No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 6025340K/6205808K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 180468K reserved)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [    0.000000] NR_IRQS:8448 nr_irqs:488 0
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 25165824 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2394.400 MHz processor
    [    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.33 BogoMIPS (lpj=7981333)
    [    0.000031] pid_max: default: 32768 minimum: 301
    [    0.000037] ACPI: Core revision 20140724
    [    0.010737] ACPI: All ACPI Tables successfully acquired
    [    0.015141] Security Framework initialized
    [    0.015146] Yama: becoming mindful.
    [    0.015604] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.017037] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.017660] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.017670] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.017854] Initializing cgroup subsys memory
    [    0.017859] Initializing cgroup subsys devices
    [    0.017860] Initializing cgroup subsys freezer
    [    0.017862] Initializing cgroup subsys net_cls
    [    0.017864] Initializing cgroup subsys blkio
    [    0.017883] CPU: Physical Processor ID: 0
    [    0.017884] CPU: Processor Core ID: 0
    [    0.017888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [    0.018805] mce: CPU supports 9 MCE banks
    [    0.018821] CPU0: Thermal monitoring enabled (TM1)
    [    0.018833] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [    0.018930] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
    [    0.019643] ftrace: allocating 20687 entries in 81 pages
    [    0.027980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.061010] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [    0.061020] TSC deadline timer enabled
    [    0.061041] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [    0.061059] ... version:                3
    [    0.061060] ... bit width:              48
    [    0.061061] ... generic registers:      4
    [    0.061062] ... value mask:             0000ffffffffffff
    [    0.061063] ... max period:             0000ffffffffffff
    [    0.061064] ... fixed-purpose events:   3
    [    0.061064] ... event mask:             000000070000000f
    [    0.084495] x86: Booting SMP configuration:
    [    0.084497] .... node  #0, CPUs:      #1
    [    0.098756] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.105430]  #2 #3 #4 #5 #6 #7
    [    0.220589] x86: Booted up 1 node, 8 CPUs
    [    0.220592] smpboot: Total of 8 processors activated (38325.66 BogoMIPS)
    [    0.228167] devtmpfs: initialized
    [    0.230940] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [    0.231682] pinctrl core: initialized pinctrl subsystem
    [    0.231717] RTC time:  6:10:48, date: 12/19/14
    [    0.231793] NET: Registered protocol family 16
    [    0.231888] cpuidle: using governor ladder
    [    0.231890] cpuidle: using governor menu
    [    0.231915] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.231917] ACPI: bus type PCI registered
    [    0.231918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.231992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.231994] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [    0.232265] PCI: Using configuration type 1 for base access
    [    0.232504] mtrr: your CPUs had inconsistent variable MTRR settings
    [    0.232505] mtrr: probably your BIOS does not setup all CPUs.
    [    0.232505] mtrr: corrected configuration.
    [    0.244996] ACPI: Added _OSI(Module Device)
    [    0.244998] ACPI: Added _OSI(Processor Device)
    [    0.244999] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.245000] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.268870] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.269663] ACPI: Dynamic OEM Table Load:
    [    0.269671] ACPI: SSDT 0xFFFF8801D5E0F400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
    [    0.281610] ACPI: Dynamic OEM Table Load:
    [    0.281617] ACPI: SSDT 0xFFFF8801D5EC8800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120518)
    [    0.294842] ACPI: Dynamic OEM Table Load:
    [    0.294848] ACPI: SSDT 0xFFFF8801D5EA9C00 000119 (v01 PmRef  ApCst    00003000 INTL 20120518)
    [    0.310590] ACPI: Interpreter enabled
    [    0.310598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [    0.310604] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [    0.310620] ACPI: (supports S0 S3 S4 S5)
    [    0.310621] ACPI: Using IOAPIC for interrupt routing
    [    0.310644] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.409679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [    0.409684] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    0.409798] \_SB_.PCI0:_OSC invalid UUID
    [    0.409799] _OSC request data:1 1f 0
    [    0.409802] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [    0.410449] PCI host bridge to bus 0000:00
    [    0.410452] pci_bus 0000:00: root bus resource [bus 00-fe]
    [    0.410454] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
    [    0.410455] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
    [    0.410456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [    0.410458] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [    0.410465] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [    0.410598] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [    0.410609] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
    [    0.410615] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [    0.410619] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
    [    0.410737] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [    0.410744] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
    [    0.410894] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [    0.410913] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
    [    0.410970] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [    0.411052] pci 0000:00:14.0: System wakeup disabled by ACPI
    [    0.411091] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [    0.411109] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061800f 64bit]
    [    0.411169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    0.411294] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [    0.411315] pci 0000:00:1a.0: reg 0x10: [mem 0xb061d000-0xb061d3ff]
    [    0.411399] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    0.411502] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [    0.411543] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [    0.411558] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
    [    0.411629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.411714] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [    0.411750] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [    0.411823] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.411908] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [    0.411944] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
    [    0.412015] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.412100] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [    0.412136] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [    0.412206] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.412333] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [    0.412353] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
    [    0.412437] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    0.412538] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [    0.412578] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
    [    0.412784] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [    0.412801] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
    [    0.412808] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
    [    0.412816] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
    [    0.412823] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
    [    0.412830] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
    [    0.412838] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
    [    0.412874] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.412986] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [    0.413001] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
    [    0.413020] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
    [    0.413202] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.413306] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
    [    0.413333] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb0507fff 64bit]
    [    0.413472] pci 0000:02:00.0: supports D1 D2
    [    0.413474] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.413504] pci 0000:02:00.0: System wakeup disabled by ACPI
    [    0.418325] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.418331] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
    [    0.418484] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000
    [    0.418566] pci 0000:03:00.0: reg 0x10: [mem 0xb0400000-0xb043ffff 64bit]
    [    0.418597] pci 0000:03:00.0: reg 0x18: [io  0x3000-0x307f]
    [    0.418873] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.418982] pci 0000:03:00.0: System wakeup disabled by ACPI
    [    0.425034] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.425038] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
    [    0.425042] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
    [    0.472074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [    0.472128] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.472179] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [    0.472232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.472325] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.472428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472540] ACPI: Enabled 4 GPEs in block 00 to 3F
    [    0.472570] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.472656] vgaarb: setting as boot device: PCI:0000:00:02.0
    [    0.472657] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.472660] vgaarb: loaded
    [    0.472661] vgaarb: bridge control possible 0000:00:02.0
    [    0.472693] PCI: Using ACPI for IRQ routing
    [    0.478193] PCI: pci_cache_line_size set to 64 bytes
    [    0.478318] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
    [    0.478320] e820: reserve RAM buffer [mem 0x96ab0000-0x97ffffff]
    [    0.478321] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
    [    0.478322] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [    0.478323] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
    [    0.478404] NetLabel: Initializing
    [    0.478405] NetLabel:  domain hash size = 128
    [    0.478406] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.478416] NetLabel:  unlabeled traffic allowed by default
    [    0.478437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [    0.478442] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [    0.480472] Switched to clocksource hpet
    [    0.484636] pnp: PnP ACPI init
    [    0.484735] system 00:00: [io  0x0680-0x069f] has been reserved
    [    0.484737] system 00:00: [io  0xffff] has been reserved
    [    0.484738] system 00:00: [io  0xffff] has been reserved
    [    0.484740] system 00:00: [io  0xffff] has been reserved
    [    0.484741] system 00:00: [io  0x1800-0x18fe] could not be reserved
    [    0.484743] system 00:00: [io  0xfd60-0xfd63] has been reserved
    [    0.484744] system 00:00: [io  0x164e-0x164f] has been reserved
    [    0.484747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.484790] system 00:01: [io  0x0800-0x087f] has been reserved
    [    0.484792] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.484819] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.484855] system 00:03: [io  0x1854-0x1857] has been reserved
    [    0.484857] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [    0.484903] pnp 00:04: Plug and Play ACPI device, IDs SYN2b15 SYN0700 SYN0002 PNP0f13 (active)
    [    0.484975] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.530665] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.530667] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [    0.530668] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.530669] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.530671] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.530673] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.530674] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.530675] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
    [    0.530677] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
    [    0.530679] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    0.530680] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [    0.530682] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [    0.530684] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.531112] pnp: PnP ACPI: found 7 devices
    [    0.537673] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
    [    0.537676] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [    0.537677] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [    0.537698] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [    0.537700] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    0.537701] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    0.537706] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
    [    0.537709] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537711] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
    [    0.537713] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.537722] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.537727] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
    [    0.537731] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537737] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.537742] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
    [    0.537750] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.537752] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
    [    0.537757] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
    [    0.537765] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.537767] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.537768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.537769] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [    0.537771] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
    [    0.537772] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
    [    0.537774] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537775] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
    [    0.537776] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
    [    0.537778] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
    [    0.537797] NET: Registered protocol family 2
    [    0.537974] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.538094] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.538215] TCP: Hash tables configured (established 65536 bind 65536)
    [    0.538230] TCP: reno registered
    [    0.538239] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.538263] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.538312] NET: Registered protocol family 1
    [    0.538325] pci 0000:00:02.0: Video device with shadowed ROM
    [    1.871621] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    3.206035] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    3.206238] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
    [    3.206279] PCI: CLS 64 bytes, default 64
    [    3.206318] Unpacking initramfs...
    [    3.259001] Freeing initrd memory: 3392K (ffff880037950000 - ffff880037ca0000)
    [    3.259009] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    3.259011] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff]
    [    3.259047] Simple Boot Flag at 0x44 set to 0x1
    [    3.259313] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [    3.259357] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259367] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259377] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259404] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259411] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259418] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259425] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259432] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259482] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [    3.259503] Scanning for low memory corruption every 60 seconds
    [    3.259747] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [    3.259765] Initialise system trusted keyring
    [    3.260051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    3.261119] zpool: loaded
    [    3.261122] zbud: loaded
    [    3.261274] VFS: Disk quotas dquot_6.5.2
    [    3.261303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    3.261403] msgmni has been set to 11774
    [    3.261449] Key type big_key registered
    [    3.261592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    3.261641] io scheduler noop registered
    [    3.261643] io scheduler deadline registered
    [    3.261665] io scheduler cfq registered (default)
    [    3.262062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    3.262075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    3.262100] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [    3.262101] vesafb: scrolling: redraw
    [    3.262102] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    3.262115] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
    [    3.349877] Console: switching to colour frame buffer device 170x48
    [    3.437348] fb0: VESA VGA frame buffer device
    [    3.437362] intel_idle: MWAIT substates: 0x42120
    [    3.437363] intel_idle: v0.4 model 0x3C
    [    3.437364] intel_idle: lapic_timer_reliable_states 0xffffffff
    [    3.437671] GHES: HEST is not enabled!
    [    3.437734] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    3.438127] Linux agpgart interface v0.103
    [    3.438182] rtc_cmos 00:02: RTC can wake from S4
    [    3.438300] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [    3.438332] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
    [    3.438342] Intel P-state driver initializing.
    [    3.438532] ledtrig-cpu: registered to indicate activity on CPUs
    [    3.438774] TCP: cubic registered
    [    3.438992] NET: Registered protocol family 10
    [    3.439502] NET: Registered protocol family 17
    [    3.440322] Loading compiled-in X.509 certificates
    [    3.440352] registered taskstats version 1
    [    3.441426]   Magic number: 10:714:165
    [    3.441569] rtc_cmos 00:02: setting system clock to 2014-12-19 06:10:51 UTC (1418969451)
    [    3.441729] PM: Hibernation image not present or could not be loaded.
    [    3.443627] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    [    3.443631] Write protecting the kernel read-only data: 8192k
    [    3.448299] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    [    3.450157] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [    3.463162] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [    3.480365] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
    [    3.520316] ACPI: bus type USB registered
    [    3.520334] usbcore: registered new interface driver usbfs
    [    3.520343] usbcore: registered new interface driver hub
    [    3.520396] SCSI subsystem initialized
    [    3.520412] usbcore: registered new device driver usb
    [    3.527223] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    3.527258] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    3.527774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    3.529927] ehci-pci: EHCI PCI platform driver
    [    3.530065] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [    3.530072] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [    3.530086] ehci-pci 0000:00:1a.0: debug port 2
    [    3.530898] libata version 3.00 loaded.
    [    3.534001] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [    3.534014] ehci-pci 0000:00:1a.0: irq 21, io mem 0xb061d000
    [    3.542963] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [    3.543106] hub 1-0:1.0: USB hub found
    [    3.543110] hub 1-0:1.0: 2 ports detected
    [    3.543320] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [    3.543324] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    3.543339] ehci-pci 0000:00:1d.0: debug port 2
    [    3.547225] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [    3.547235] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
    [    3.556309] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [    3.556437] hub 2-0:1.0: USB hub found
    [    3.556441] hub 2-0:1.0: 2 ports detected
    [    3.556672] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    3.556678] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [    3.556769] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [    3.556791] xhci_hcd 0000:00:14.0: irq 24 for MSI/MSI-X
    [    3.557006] hub 3-0:1.0: USB hub found
    [    3.557025] hub 3-0:1.0: 14 ports detected
    [    3.560152] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    3.560155] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [    3.560285] hub 4-0:1.0: USB hub found
    [    3.560294] hub 4-0:1.0: 4 ports detected
    [    3.560999] ahci 0000:00:1f.2: version 3.0
    [    3.561114] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
    [    3.561137] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [    3.561157] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
    [    3.561159] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst
    [    3.566914] scsi host0: ahci
    [    3.567156] scsi host1: ahci
    [    3.567347] scsi host2: ahci
    [    3.567467] scsi host3: ahci
    [    3.567569] scsi host4: ahci
    [    3.567677] scsi host5: ahci
    [    3.567709] ata1: DUMMY
    [    3.567710] ata2: DUMMY
    [    3.567711] ata3: DUMMY
    [    3.567712] ata4: DUMMY
    [    3.567719] ata5: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b300 irq 25
    [    3.567722] ata6: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b380 irq 25
    [    3.573511] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    3.849898] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [    3.886651] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.887407] ata5.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133
    [    3.887410] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    3.888216] ata5.00: configured for UDMA/133
    [    3.888387] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5
    [    3.973973] hub 1-1:1.0: USB hub found
    [    3.974050] hub 1-1:1.0: 6 ports detected
    [    4.080133] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [    4.204158] hub 2-1:1.0: USB hub found
    [    4.204235] hub 2-1:1.0: 8 ports detected
    [    4.206857] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    4.211266] ata6.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
    [    4.212138] ata6.00: configured for UDMA/100
    [    4.219154] scsi 5:0:0:0: CD-ROM            PLDS     DVD-RW DS8A9SH   EL3A PQ: 0 ANSI: 5
    [    4.236511] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    4.236515] sd 4:0:0:0: [sda] 4096-byte physical blocks
    [    4.236531] sd 4:0:0:0: [sda] Write Protect is off
    [    4.236533] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    4.236547] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.251972] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    4.251975] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    4.252099] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [    4.260280] tsc: Refined TSC clocksource calibration: 2394.455 MHz
    [    4.363728] usb 3-4: new high-speed USB device number 2 using xhci_hcd
    [    4.484466]  sda: sda1 sda2 sda3 sda4
    [    4.485024] sd 4:0:0:0: [sda] Attached SCSI disk
    [    4.747370] usb 3-7: new full-speed USB device number 3 using xhci_hcd
    [    4.931858] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [    5.080974] usb 3-8: new high-speed USB device number 4 using xhci_hcd
    [    5.261176] Switched to clocksource tsc
    [    5.542435] random: nonblocking pool is initialized
    [    6.737889] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    7.374747] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [    8.402584] systemd-journald[180]: Received request to flush runtime journal from PID 1
    [    9.159616] mei_me 0000:00:16.0: irq 26 for MSI/MSI-X
    [    9.162354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
    [    9.162358] ACPI: Power Button [PWRB]
    [    9.162422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [    9.162455] ACPI: Lid Switch [LID0]
    [    9.162497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [    9.162500] ACPI: Power Button [PWRF]
    [    9.202130] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [    9.242990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    9.280404] EDAC MC: Ver: 3.0.0
    [    9.285113] thermal LNXTHERM:00: registered as thermal_zone0
    [    9.285116] ACPI: Thermal Zone [TZ00] (45 C)
    [    9.338052] EDAC ie31200: No ECC support
    [    9.364458] ACPI: Battery Slot [BAT1] (battery present)
    [    9.364565] ACPI: AC Adapter [ACAD] (off-line)
    [    9.437541] AVX2 version of gcm_enc/dec engaged.
    [    9.452250] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
    [    9.480172] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:9c:67:19]
    [    9.505148] snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
    [    9.611542] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [    9.611546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    9.624543] sound hdaudioC1D0: CX20757: BIOS auto-probing.
    [    9.624780] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
    [    9.624782] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [    9.624783] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
    [    9.624784] sound hdaudioC1D0:    mono: mono_out=0x0
    [    9.624785] sound hdaudioC1D0:    inputs:
    [    9.624786] sound hdaudioC1D0:      Internal Mic=0x1a
    [    9.624788] sound hdaudioC1D0:      Mic=0x19
    [    9.625578] sound hdaudioC1D0: Enable sync_write for stable communication
    [    9.628176] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
    [    9.628318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
    [    9.628364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [    9.632142] iTCO_vendor_support: vendor-support=0
    [    9.654572] usbcore: registered new interface driver rtsx_usb
    [    9.717317] media: Linux media interface: v0.10
    [    9.733028] alx 0000:03:00.0 enp3s0: renamed from eth0
    [    9.762463] Linux video capture interface: v2.00
    [    9.762505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [    9.762530] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
    [    9.762613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    9.766150] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:114f)
    [    9.772028] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input11
    [    9.772070] usbcore: registered new interface driver uvcvideo
    [    9.772071] USB Video Class driver (1.1.1)
    [   10.188776] kvm: disabled by bios
    [   10.212338] kvm: disabled by bios
    [   10.214858] [drm] Initialized drm 1.1.0 20060810
    [   10.300482] intel_rapl: Found RAPL domain package
    [   10.300487] intel_rapl: Found RAPL domain core
    [   10.300489] intel_rapl: Found RAPL domain uncore
    [   10.300491] intel_rapl: Found RAPL domain dram
    [   10.572444] [drm] Memory usable by graphics device = 2048M
    [   10.572448] checking generic (a0000000 410000) vs hw (a0000000 10000000)
    [   10.572449] fb: switching to inteldrmfb from VESA VGA
    [   10.572462] Console: switching to colour dummy device 80x25
    [   10.572521] [drm] Replacing VGA console driver
    [   10.592061] i915 0000:00:02.0: irq 28 for MSI/MSI-X
    [   10.592079] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [   10.592080] [drm] Driver supports precise vblank timestamp query.
    [   10.592104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [   10.627892] [drm] VBT doesn't support DRRS
    [   10.775953] Adding 6291452k swap on /dev/sda3.  Priority:-1 extents:1 across:6291452k FS
    [   10.840003] fbcon: inteldrmfb (fb0) is primary device
    [   11.012282] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [   11.396384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
    [   11.526095] Console: switching to colour frame buffer device 170x48
    [   11.528923] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [   11.528924] i915 0000:00:02.0: registered panic notifier
    [   11.530503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [   11.544314] mousedev: PS/2 mouse device common for all mice
    [   11.573903] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   11.573964] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
    [   11.574020] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [   11.579445] snd_hda_intel 0000:00:03.0: irq 29 for MSI/MSI-X
    [   11.609895] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [   11.609965] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
    [   11.610026] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
    [   49.117466] alx 0000:03:00.0: irq 30 for MSI/MSI-X
    [   49.117775] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [   49.118703] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
    [   49.119271] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [   60.675960] fuse init (API version 7.23)
    [  300.529167] mce: [Hardware Error]: Machine check events logged

  • Firefox 24.0 will not start in Win 7 64bit environment on Dell N5010 i3 Inspiron after upgrade/fresh instal

    My Computer Notebook is a Dell N5010 Inspiron with an i3 processor running a Win 7 64bit OS. Firefox has always run smoothly on it. I could not exactly determine when it started failing to open after each attempt to start but I think it was when I accepted the offer to upgrade to Firefox 24.0. I have since then upgraded at least 5 times without any change in performance. From another customer experience in the Support website I downloaded the Setup file and tried fresh installation with the same result. What I have not tried is removal of the Profile because I do not know how to replace the Profile file.

    Try to start windows in safe-mode [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true Windows in safe-mode]. Also see [[Firefox won't start - find solutions]]

Maybe you are looking for

  • Apple TVs in Multiple Locations with 1 Itunes Account

    Hi, Is it possible to use multiple Apple TVs with 1 iTunes account even if we are in different locations. For example if my wife watches a movie we had purchased through Apple TV at our cottage, could I still use to our home Apple TV to watch other p

  • Component Font Problem

    Hi all, I have a problem with displaying fonts in a component which has been masked, namely, list, dropdown and scroll pane. It all seems to work fine, but when I load the first swf into the second using a Loader object the fonts do not display. I ha

  • TS1702 My book that I downloaded just says error what should I do

    I have iBooks and was reading the book. Now it just says error. What can I do to get the book back?

  • Image JPEG data

    I am developing a program that needs to be able to create reports in RTF format. Some of the things that it needs to put in the report are images of various onscreen components, such as JPanels. I've written the RTF writer so that it can insert JPEG

  • Power point wavy, limited screen , blacked out on sides, only in power point

    I have trouble withpower point being wazy and limited on both sides of screen are blacked out, only pwer point does this, cant get it to stop, any advice on why this happens to only power point?