Arch64 on Samsung NC20
hi all,
this is my first post and it is the first time that i'm using arch (decade long slackware addict here)
I was wondering whether somebody uses arch on the samsung nc20. i haven't found one single post in the forum about it, is it because no one uses it or because everything runs smoothly?
i got arch64 installed on the machine and everything is working fine, except that the screen won't come up after suspend or hibernate.
I am using openchrome because the proprietary via gfx driver doesn't work with xorg 1.6 (i would be using it anyway since i tend to prefer free software, and the via driver apparently sucks)
I'm using the latest git kernel (2.6.31-rc4-git3) for all the Via Nano goodies to work (padlock for ssl encryption, RNG, cpu frequency scaling).
Has anyone managed to get suspend/hibernate work on this machine?
Does anyone have some experiences to share?
thankyou!
Last edited by hjk (2009-08-27 22:48:34)
I just tried the newly released official drivers on x86_64. The xorg module loads but X crashes sistematically.
I tried to disable vbe in xorg.conf because i think the issue is related to it, but still no luck.
here is Xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux weiss 2.6.31-rc7 #1 PREEMPT Wed Aug 26 20:12:10 UTC 2009 x86_64
Build Date: 25 August 2009 09:11:18PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 27 20:12:15 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "RandR" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x15c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:1:0) 1106:1122:144d:c04e VIA Technologies, Inc. VX800/VX820 Chrome 9 HC3 Integrated Graphics rev 17, Mem @ 0xd0000000/268435456, 0xf4000000/16777216, 0xf0000000/67108864, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) "vbe" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 5.74.255
Module class: X.Org Video Driver
(II) via: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,
P4M900, VX800, VX855
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "viavideo"
(II) LoadModule: "viavideo"
(WW) Warning, couldn't open module viavideo
(II) UnloadModule: "viavideo"
(EE) VIA: Failed to load module "viavideo" (module does not exist, 0)
(WW) VIA(0): Couldn't open viavideo
(--) VIA(0): Chipset: "VX800"
(--) VIA(0): Chipset Rev.: 0
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VIA(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) VIA(0): VESA BIOS detected
(II) VIA(0): VESA VBE Version 3.0
(II) VIA(0): VESA VBE Total Mem: 32768 kB
(II) VIA(0): VESA VBE OEM: VIA VX800
(II) VIA(0): VESA VBE OEM Software Rev: 1.0
(II) VIA(0): VESA VBE OEM Vendor:
(II) VIA(0): VESA VBE OEM Product:
(II) VIA(0): VESA VBE OEM Product Rev:
(**) VIA(0): Option "ActiveDevice" "LCD"
(**) VIA(0): Option "LCDPort" "LVDS0"
(**) VIA(0): Option "PanelSize" "1280x800"
(==) VIA(0): Using XAA acceleration architecture.
(II) VIA(0): MergedFB mode forced off.
(**) VIA(0): Active Device is LCD.
(**) VIA(0): LCD Panel Size is 1280x800.
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): VGA BIOS Version is = 5.0
(II) VIA(0): VGA BIOS Release Date Is: 2008/12/1
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 262144k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
Backtrace:
0: /usr/bin/Xorg(xorg_backtrace+0x26) [0x4e9186]
1: /usr/bin/Xorg(xf86SigHandler+0x6f) [0x47612f]
2: /lib/libc.so.6 [0x7fcefeaa2f90]
3: /usr/lib/xorg/modules/drivers//via_drv.so(viaWriteVgaIo+0x24) [0x7fcefd2ae2e4]
4: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2ae68f]
5: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2aea47]
6: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2aeb11]
7: /usr/lib/xorg/modules/drivers//via_drv.so(viaSerialReadBytes+0x48) [0x7fcefd2aecb8]
8: /usr/lib/xorg/modules/drivers//via_drv.so(VIADoEDID+0x13d) [0x7fcefd2dbd1d]
9: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2dd89d]
10: /usr/bin/Xorg(InitOutput+0x507) [0x468e27]
11: /usr/bin/Xorg(main+0x1fe) [0x42e5be]
12: /lib/libc.so.6(__libc_start_main+0xfd) [0x7fcefea8f9ed]
13: /usr/bin/Xorg [0x42dbf9]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Similar Messages
-
Arch64 on Samsung NF310 netbook?
Hi there,
As a previous satisfied nc10 owner I just got my nf310 netbook from samsung. It comes with the atom n550 processor which supports 64 bit. And now there's my question: Should I install the 64bit version of arch? I never really thought about it deeply with my other systems, I just installed 64bit if the processor supported it, but do you think maybe I will LOOSE some performance on my netbook other than having a little bit more memory usage in comparison to 32bit? I should probably also mention that I upgraded the internal 1gb of ram to the hardware maximum of 2gb. Amusingly my main reason to worry with 64bit linux is STILL flash. especially on netbooks
what do you guys think?I would. I have had little to no issues with flash on x86_64 as of lately (other than flash sucks in general). At this point, I see no reason not to use Arch64 on all (3) of my 64 bit systems. Multilib comes in handy when need be, too.
-
IOS 5.0 and iPhone along with "new user account"
I do hate this hacking aspect of all software, but with iTunes especially.
Earlier I tried to remove some duplicates in the iTunes on my old computer, but time after time they popped back from the trash can, what the heck!
There was a running computer with my iTunes account and everything was fine. Later I even made a restore to new phone after previous phone got lost.
Then I had to buy new laptop to replace the old as it got broken.
As instructed, I installed iTunes onto the new computer and was able to connect my Apple Store account and purchased Apps.
Then after I copied everything in the Apple Computer - folders and iTunes in my old (same user account name) to the new computer, now running with Windows 7 (former laptop had XP).
Now my iPhone 4 (iOS 5.0) does not sync.
Sync failed to start...
Also I wonder what is the reason not to be able to sync back from the handheld? Nokia has that and it really works. When I have new contacts and restore from backup I loose my contacts, since there is no sync file on the new computer. Why the system does not work automatically and sync back from the phone, if no source files found on the computer? The back sync coud be asked every time new phone or ipod/pad is connected.
Im starting to be absolutely fed up with this constant browsing through discussions forums and what ever hacking pages to get things running that I'm just about to throw the device into the lake next to my house. AAARGH!
Why do we even accept this? Who would buy or use a car, that had to be repaired or re-booted every 10 miles?
Great jobs!
Change over was, is from Samsung NC20 (WinXP) to HP Probook 5330m (Winows 7)Update your XCode to 4.3.2
Your question should be in developer forum
Developer Forums -
[SOLVED] cannot set keyboard for X clients
Hi everyone,
I just set up Arch on my Samsung NC20 a few days ago after a couple of years on Ubuntu. I'm enjoying it so far, but I've run into the following problem. I've tried to set my keyboard to 'uk' but I only get a UK keyboard at login time. As soon as I launch an X client, I am back with a US keyboard. (In case it matters, I've mainly been using wmii, LilyTerm, and Firefox. I have no desktop.)
My /etc/vconsole.conf file reads
KEYMAP=uk
and I set up a file /etc/X11/xorg.conf.d/99-keyboard-locale.conf that reads as follows:
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "uk"
EndSection
The option 'uk' is indeed present on my machine (although I tried 'gb' too, to no avail). When I look in /usr/share/kbd/keymaps/i386/qwerty I find uk.map.gz; and I get a UK keyboard when I log in, as I said.
One weird thing is that if I run
setxkbmap -layout uk
from the command line in LilyTerm, I get the following:
No protocol specified
Cannot open display ":0"
I don't know if that's relevant.
Can anyone help? How can I set my keyboard to 'uk' for X clients?
Best,
PaulE
Last edited by PaulE (2012-12-21 22:16:05)As far as I know, there is no uk layout for xorg and keymap ≠ X keyboard layout. Always check /usr/share/X11/xkb/rules/xorg.lst.
cat /usr/share/X11/xkb/rules/xorg.lst | grep UK
gb English (UK) # keyboard layout (following lines are variants)
extd gb: English (UK, extended WinKeys)
intl gb: English (UK, international with dead keys)
dvorak gb: English (UK, Dvorak)
dvorakukp gb: English (UK, Dvorak with UK punctuation)
mac gb: English (UK, Macintosh)
mac_intl gb: English (UK, Macintosh international)
colemak gb: English (UK, Colemak)
Try adding setxkbmap -layout gb to your .xinitrc file and see if it solves the problem.
EDIT: Added a comment to the first line of output.
Last edited by ximun (2012-12-21 15:55:21) -
Arch64 sounds studio -OR- help get me out of FC3
Hey everybody, It's been a while since I've been on the messageboards. My computer died before I went on vacation, and on my return I decided to set up a Linux recording studio. I decided to go with the Planet CCRMA version of FC3 so I could see what they consider to be "proper function" for their audio apps.
So I've pretty much got it, and I still hate RPMs. I'd also like to take advantage of my 64-bitness, but since I haven't been around, I don't know how Arch 64 is going. My rig:
Athlon 64 3000+
1GB dual channel DDR
NF4-SLI motherboard
Geforce 6600GT 128MB PCIe
100GB ATA WD HDD - OS
120GB SATA WD HDD - Music library
200GB SATA Samsung HDD - Recording
BenQ DVD-RW
RME HDSP9652
I'm using a Presonus DigiMAX 96k as mic preamps, with ADAT lightpipe into the HDSP9652. I'm wondering if there are any people out there doing similar things on Arch64, and how it's going for them. Questions:
1. Can I usually just recompile most Arch packages and have them work, or are those the exception?
2. Does anybody have Ardour up and running with the LADSPA plugins listed at the CCRMA site? How about with RME hardware?
http://ccrma.stanford.edu/planetccrma/s … world.html
3. I see there's a wiki entry for installing Arch64, but there's also an install CD at www.arch64.org. Should I just be able to install off the CD like I do the normal Arch CD?
If I get up and running, I'll be happy to maintain apps I use and I wouldn't mind using my computer as a compiling box for 64-bit stuff. Apps I use (some better than others):
Ardour
HDSPConf
HDSPMixer
LADSPA
Rezound
JAMin
Freqtweak
Ceres3
Hydrogen
Anyway, any help would be appreciated. I wouldn't mind that much just running i686 Arch for the time being. I'm looking forward to being back in Arch again.I'm in Arch again. AaaaahHH!!! Thank God. it's like, you can f8king tell it what to do, and it DOES IT!
Oh, my. I am flush with the glory of Ardour working without any tweaking! FLUSH!
No 64 bit yet, but soon to come. WEEE! -
Using mini-DVI to VGA adapter to Samsung display
I have 2009 late model of mac mini, The text on display looks washed out, not clear or sharp at all from day one, I thought it was the old model of monitor, tried the same cable to another monitor on another computer, SAME. so I thought the problem could be the cable or adapter.
It's hard for me to believe is the signal from computer. I'm using VGA adapter made by Dynex bought from Best Buy.
Anybody has suggestions?? ThanksYeah, My old Samsung is lcd synmaster 17", bought many years ago at around $1000. Crazy, crazy price looked back. It's fine when I used it on the retired old Dell. It must be the adapter, trying not to buy another VGA adapter, could not image my next lcd will use one, anyway.
This cable has only 14 pins vs 15 pins on the other cable, not sure if it matters?? Or if Safari has anything to do with it??
Thank for you reply... -
Using Mac Mini and a 26" Samsung Tube TV with Apple DVI to Video Adapter
So upon first hooking this adapter up from my Mac Mini to my samsung 27" tube TV, it worked fine–but everything was massive in size. I started changing resolution sizes in the preferences panel and one of them set the screen flickering vertically, like a mismatch in refresh rates.
Anybody else have this issue and resolve it successfully? It obviously works, it was for me for the first couple minutes, but I can't figure out what sent it flickering–and how to resolve it.
The TV is connected VIA composite (RCA) cable from the adapter to the video-in port.Try starting in Safe mode. That should get your screen back.
http://support.apple.com/kb/HT1455?viewlocale=en_US
See also this article:
http://support.apple.com/kb/TS2213?viewlocale=en_US -
Trouble connecting MacBook to a Samsung 27'' TFT
Hi people.
I often connect my 1,83 Core Duo MacBook to a Samsung TFT display using the Mini DVI to VGA adapter and an VGA cable, in order to watch DVDs, AVIs, high definition podcasts and that kind of stuff on a bigger screen.
The MacBook and the Samsung seem to like each other, as they instantly start to work together. But there's a little issue I just can't imagine how to work out.
The resolution of the external TFT display is 1280 x 768 and the Mac gives me the option to select it at different refresh rates. And here comes the problem:
When I select 1280 x 768 at 60 Hz, the image looks clean and crisp, but it appears displaced to the left. I mean, I loose part of the desktop on the left, and I see a narrow black column at the right of the external screen.
At 85 Hz the desktop fits the screen perfectly, but the image is a little blurry. I can work that way, but I don't like losing the crispness, and when I watch video I can actually see the frames refreshing.
At 75 Hz I have both problems, and higher refresh rates are not supported by the Samsung TFT.
Any clue about how can I work it out?
Thanks!Here are some details of an exact timing to try that I have used successfully on a 1280 x 768 Samsung TV. Maybe they will work for your TV.
Pixel clock: 80.13 MHz
H Active: 1280 pixels
H Front porch: 64 pixels
H Sync width: 136 pixels
H Back porch: 200 pixels
V Active: 768 lines
V Front porch: 1 line
V Sync width: 3 lines
V Back porch: 23 lines
H Sync is positive
V Sync is negative (no check mark in box)
Interlace is off (no check mark in box) -
How to use Hotmail account to sign in to Samsung T...
Before I could respond to this forum I was asked to sign in. I was going to post something fairly snarky. Then I was asked to create a Skype Name different than my hotmail account. So I created one. Hopefully this will answer MY question and that is why, on my Samsung TV app does it not offer the hotmail login or sign in name. Now maybe I can use the one Skype Name I just created???
Error: System cannot find the specified path
I am getting this eroor
Parashuram Singade www.distinctnotion.com -
How can I install fglrx driver on Arch64
Hello!
I have installed Arch64 but I've got a bit problem now. Fglrx drivers isn't going to work with my graphic card - Shapphire Radeon HD3650 (on Arch32 it worked). My xorg.conf file
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
Section "InputDevice"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
# Identifier and driver
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Also when I use vesa drivers it work OK, but when I use fglrx logs are clean but I can see only black screen, sometimes with mouse cursor which isn't going to move - It is on the center of screen.
(I apologize to my English. I hope you will understand me )You can try to put the following line in the 'Device' Section
Option "ShadowFB"
and create a the following somewhere in the file
Section "ServerFlags"
Option "AIGLX" "no"
EndSection -
So I thought everything was fine until an application told me I had 4gb of RAM which is a far cry from the installed 16gb.
I did plenty of digging around and narrowed it down to a couple possibilities, but first my investigation:
I started with free:
[vuvffufg@HereAndNow-Main ~]$ free
total used free shared buff/cache available
Mem: 4015688 858084 115144 24832 3042460 2860360
Swap: 16777212 22460 16754752
As you can see it shows their is 4gb of RAM much as the application did.
You can see I have 16gb of swap; I am aware and am not confusing swap with RAM, I damn well have 4x4gb sticks according to the memtest86+ option on boot.
So then I thought hardware and tried dmidecode --type memory:
[vuvffufg@HereAndNow-Main ~]$ sudo dmidecode --type memory
[sudo] password for vuvffufg:
# dmidecode 2.12
SMBIOS 2.7 present.
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0009
0x000A
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 2 3
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 4 5
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 6 7
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x002E, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm0
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB481
Asset Tag: Dimm0_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0030, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm1
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm1_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm2
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB473
Asset Tag: Dimm2_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm3
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm3_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Found it quite strange that the OS can obviously see the memory it just isn't being allocated, also what is with the slow clock speeds?
I found a similar output with lshw.
So I moved on to checking how it is actually initialized in dmesg, and honestly a lot of what was output I don't quite understand, I noticed that some memory was being reserved by the RAM map given by BIOs yet have no obvious way of disabling the BIOs RAM scheduler.
[vuvffufg@HereAndNow-Main ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.2-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] tseg: 00bf800000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be857fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be858000-0x00000000bea2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea30000-0x00000000bea39fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea3a000-0x00000000bee2bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee2c000-0x00000000bf159fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13edfffff]
[ 0.000000] [mem 0x120000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe857fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbe7fffff] page 2M
[ 0.000000] [mem 0xbe800000-0xbe857fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] [mem 0xbf15a000-0xbf15afff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] [mem 0xbf361000-0xbf3fffff] page 4k
[ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M
[ 0.000000] RAMDISK: [mem 0x377f0000-0x37beffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA32070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA37D20 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000BEA32158 005BC1 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE26F80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA37E18 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEA37EB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEA37F00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEA37F40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEA37F78 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000BEA39690 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff9000-0x13effcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013a600000-ffff88013e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe857fff]
[ 0.000000] node 0: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] node 0: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 1039508
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12148 pages used for memmap
[ 0.000000] DMA32 zone: 777464 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe858000-0xbea2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea30000-0xbea39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea3a000-0xbee2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee2c000-0xbf159fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023243
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 4009504K/4158032K available (5533K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 148528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.290 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.43 BogoMIPS (lpj=13394300)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20141107
[ 0.002553] ACPI: All ACPI Tables successfully acquired
[ 0.002750] Security Framework initialized
[ 0.002758] Yama: becoming mindful.
[ 0.002999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004926] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004931] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005146] Initializing cgroup subsys memory
[ 0.005153] Initializing cgroup subsys devices
[ 0.005155] Initializing cgroup subsys freezer
[ 0.005158] Initializing cgroup subsys net_cls
[ 0.005160] Initializing cgroup subsys blkio
[ 0.005177] CPU: Physical Processor ID: 0
[ 0.005178] CPU: Processor Core ID: 0
[ 0.005180] mce: CPU supports 7 MCE banks
[ 0.005185] LVT offset 1 assigned for vector 0xf9
[ 0.005190] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.005254] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.005835] ftrace: allocating 21170 entries in 83 pages
[ 0.087004] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120030] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.224266] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224270] ... version: 0
[ 0.224271] ... bit width: 48
[ 0.224272] ... generic registers: 6
[ 0.224273] ... value mask: 0000ffffffffffff
[ 0.224274] ... max period: 00007fffffffffff
[ 0.224275] ... fixed-purpose events: 0
[ 0.224276] ... event mask: 000000000000003f
[ 0.237668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244346] x86: Booting SMP configuration:
[ 0.244347] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.354188] x86: Booted up 1 node, 8 CPUs
[ 0.354192] smpboot: Total of 8 processors activated (64318.50 BogoMIPS)
[ 0.364078] devtmpfs: initialized
[ 0.366485] PM: Registering ACPI NVS region [mem 0xbea3a000-0xbee2bfff] (4136960 bytes)
[ 0.366531] PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
[ 0.366716] pinctrl core: initialized pinctrl subsystem
[ 0.366744] RTC time: 18:28:15, date: 04/01/15
[ 0.366834] NET: Registered protocol family 16
[ 0.377691] cpuidle: using governor ladder
[ 0.391032] cpuidle: using governor menu
[ 0.391080] ACPI: bus type PCI registered
[ 0.391082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.391143] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.391146] PCI: not using MMCONFIG
[ 0.391147] PCI: Using configuration type 1 for base access
[ 0.391148] PCI: Using configuration type 1 for extended access
[ 0.391412] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.391413] mtrr: probably your BIOS does not setup all CPUs.
[ 0.391413] mtrr: corrected configuration.
[ 0.404756] ACPI: Added _OSI(Module Device)
[ 0.404758] ACPI: Added _OSI(Processor Device)
[ 0.404759] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404760] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.406816] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.410092] ACPI: Interpreter enabled
[ 0.410097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.410100] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.410113] ACPI: (supports S0 S3 S4 S5)
[ 0.410115] ACPI: Using IOAPIC for interrupt routing
[ 0.410239] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.410276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.410593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.416288] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.416292] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.416712] PCI host bridge to bus 0000:00
[ 0.416715] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.416717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.416718] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.416720] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.416721] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.416723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.416724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.416726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.416735] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.416847] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.416951] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.416985] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.417032] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.417072] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.417104] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.417151] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.417185] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.417217] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.417263] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.417308] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.417322] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.417329] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.417336] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.417343] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.417350] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.417357] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
[ 0.417461] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.417471] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
[ 0.417556] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.417595] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.417609] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
[ 0.417671] pci 0000:00:12.2: supports D1 D2
[ 0.417672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.417721] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.417760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.417770] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
[ 0.417851] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.417891] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.417905] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
[ 0.417966] pci 0000:00:13.2: supports D1 D2
[ 0.417967] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.418015] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.418053] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.418166] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.418176] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.418183] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.418190] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.418197] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.418204] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.418219] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.418220] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.418221] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.418222] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.418300] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.418316] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.418365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.418410] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.418445] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.418561] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.418627] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.418661] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.418671] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
[ 0.418754] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.418790] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.418800] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
[ 0.418883] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.418922] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.418936] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
[ 0.418998] pci 0000:00:16.2: supports D1 D2
[ 0.418999] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.419045] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.419083] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.419160] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.419231] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.419304] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.419379] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.419451] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.419570] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
[ 0.419581] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.419591] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.419600] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.419607] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.419614] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.419708] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.419718] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.424396] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.424400] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.424402] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.424406] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.424450] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.424463] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff 64bit]
[ 0.424519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431063] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.431067] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.431115] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.431125] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.431131] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.431137] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.431143] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.431149] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.431155] pci 0000:03:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
[ 0.431161] pci 0000:03:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
[ 0.431194] pci 0000:03:00.0: PME# supported from D3hot
[ 0.437733] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.437737] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.437739] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.437784] pci 0000:04:06.0: [10ec:8169] type 00 class 0x020000
[ 0.437802] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.437812] pci 0000:04:06.0: reg 0x14: [mem 0xfe121000-0xfe1210ff]
[ 0.437855] pci 0000:04:06.0: reg 0x30: [mem 0xfe100000-0xfe11ffff pref]
[ 0.437888] pci 0000:04:06.0: supports D1 D2
[ 0.437889] pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.437947] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.437965] pci 0000:04:0e.0: reg 0x10: [mem 0xfe120000-0xfe1207ff]
[ 0.437975] pci 0000:04:0e.0: reg 0x14: [io 0xc100-0xc17f]
[ 0.438055] pci 0000:04:0e.0: supports D2
[ 0.438056] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.438114] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.438117] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.438120] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.438123] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.438125] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.438126] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.438128] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.438129] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.438131] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.438132] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.438151] pci_bus 0000:00: on NUMA node 0
[ 0.438559] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.438620] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.438682] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.438744] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.438794] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.438856] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.438896] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.438935] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.439110] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.439112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439114] vgaarb: loaded
[ 0.439115] vgaarb: bridge control possible 0000:01:00.0
[ 0.439189] PCI: Using ACPI for IRQ routing
[ 0.445486] PCI: pci_cache_line_size set to 64 bytes
[ 0.445539] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.445541] e820: reserve RAM buffer [mem 0xbe858000-0xbfffffff]
[ 0.445542] e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
[ 0.445543] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.445544] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.445636] NetLabel: Initializing
[ 0.445637] NetLabel: domain hash size = 128
[ 0.445638] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.445647] NetLabel: unlabeled traffic allowed by default
[ 0.445664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.445666] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.447711] Switched to clocksource hpet
[ 0.453281] pnp: PnP ACPI init
[ 0.453370] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.453373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453631] system 00:01: [io 0x040b] has been reserved
[ 0.453633] system 00:01: [io 0x04d6] has been reserved
[ 0.453634] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.453636] system 00:01: [io 0x0c14] has been reserved
[ 0.453638] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.453639] system 00:01: [io 0x0c52] has been reserved
[ 0.453641] system 00:01: [io 0x0c6c] has been reserved
[ 0.453642] system 00:01: [io 0x0c6f] has been reserved
[ 0.453644] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.453646] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.453647] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.453649] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.453650] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.453652] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.453654] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.453655] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.453657] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.453659] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.453661] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.453663] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.453665] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.453667] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.453669] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.453671] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.453673] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.453675] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453821] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.453823] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.453825] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.453827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454077] pnp 00:03: [dma 0 disabled]
[ 0.454116] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454146] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454202] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.454205] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454375] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.454377] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454493] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.454495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454597] pnp: PnP ACPI: found 9 devices
[ 0.461181] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.461184] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.461186] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.461189] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461192] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.461194] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.461198] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.461199] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.461202] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.461205] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.461207] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.461211] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.461217] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.461219] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.461221] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.461222] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.461224] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461225] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461227] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461228] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.461230] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.461231] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461233] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.461234] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.461236] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.461237] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.461239] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.461240] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.461241] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.461243] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.461244] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.461246] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461247] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461248] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461266] NET: Registered protocol family 2
[ 0.461445] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.461541] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.461669] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.461704] TCP: reno registered
[ 0.461711] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461786] NET: Registered protocol family 1
[ 0.771487] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.771739] PCI: CLS 64 bytes, default 64
[ 0.771777] Unpacking initramfs...
[ 0.818296] Freeing initrd memory: 4096K (ffff8800377f0000 - ffff880037bf0000)
[ 0.818928] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.818930] AMD-Vi: Interrupt remapping enabled
[ 0.819044] AMD-Vi: Initialized for Passthrough Mode
[ 0.894098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894100] software IO TLB [mem 0xba858000-0xbe858000] (64MB) mapped at [ffff8800ba858000-ffff8800be857fff]
[ 0.894417] perf: AMD NB counters detected
[ 0.894473] microcode: CPU0: patch_level=0x06000822
[ 0.894480] microcode: CPU1: patch_level=0x06000822
[ 0.894489] microcode: CPU2: patch_level=0x06000822
[ 0.894497] microcode: CPU3: patch_level=0x06000822
[ 0.894505] microcode: CPU4: patch_level=0x06000822
[ 0.894512] microcode: CPU5: patch_level=0x06000822
[ 0.894520] microcode: CPU6: patch_level=0x06000822
[ 0.894528] microcode: CPU7: patch_level=0x06000822
[ 0.894571] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.894574] LVT offset 0 assigned for vector 0x400
[ 0.894593] perf: AMD IBS detected (0x000000ff)
[ 0.894612] Scanning for low memory corruption every 60 seconds
[ 0.894922] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.894967] Initialise system trusted keyring
[ 0.895290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896718] zpool: loaded
[ 0.896720] zbud: loaded
[ 0.896855] VFS: Disk quotas dquot_6.5.2
[ 0.896887] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.897041] Key type big_key registered
[ 0.897219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897278] io scheduler noop registered
[ 0.897280] io scheduler deadline registered
[ 0.897311] io scheduler cfq registered (default)
[ 0.897582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.897597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.897611] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.897612] vesafb: scrolling: redraw
[ 0.897613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.897630] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
[ 0.908558] Console: switching to colour frame buffer device 160x64
[ 0.919363] fb0: VESA VGA frame buffer device
[ 0.919406] GHES: HEST is not enabled!
[ 0.919477] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.939995] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.940350] Linux agpgart interface v0.103
[ 0.940412] rtc_cmos 00:04: RTC can wake from S4
[ 0.940505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.940526] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.940538] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.940741] TCP: cubic registered
[ 0.940831] NET: Registered protocol family 10
[ 0.941040] NET: Registered protocol family 17
[ 0.941657] Loading compiled-in X.509 certificates
[ 0.941667] registered taskstats version 1
[ 0.942038] Magic number: 11:895:492
[ 0.942102] rtc_cmos 00:04: setting system clock to 2015-04-01 18:28:16 UTC (1427912896)
[ 0.942169] PM: Hibernation image not present or could not be loaded.
[ 0.942657] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.942658] Write protecting the kernel read-only data: 8192k
[ 0.943029] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.943194] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.948897] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.960384] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.960767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.965753] ACPI: bus type USB registered
[ 0.965786] usbcore: registered new interface driver usbfs
[ 0.965799] usbcore: registered new interface driver hub
[ 0.965834] SCSI subsystem initialized
[ 0.965866] usbcore: registered new device driver usb
[ 0.966937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.967199] QUIRK: Enable AMD PLL fix
[ 0.967214] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967216] ehci-pci: EHCI PCI platform driver
[ 0.967220] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.967486] hub 1-0:1.0: USB hub found
[ 0.967493] hub 1-0:1.0: 1 port detected
[ 0.967607] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.967627] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.967789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.967791] libata version 3.00 loaded.
[ 0.967804] hub 2-0:1.0: USB hub found
[ 0.967816] hub 2-0:1.0: 4 ports detected
[ 0.967981] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 0.967988] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.967999] ehci-pci 0000:00:12.2: debug port 1
[ 0.968051] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[ 0.968187] ohci-pci: OHCI PCI platform driver
[ 0.978101] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.978260] hub 3-0:1.0: USB hub found
[ 0.978266] hub 3-0:1.0: 5 ports detected
[ 0.978471] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.978476] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.978478] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.978487] ehci-pci 0000:00:13.2: debug port 1
[ 0.978508] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
[ 0.988131] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.988272] hub 4-0:1.0: USB hub found
[ 0.988277] hub 4-0:1.0: 5 ports detected
[ 0.988478] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.988483] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 0.988485] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.988493] ehci-pci 0000:00:16.2: debug port 1
[ 0.988514] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
[ 0.998136] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.998291] hub 5-0:1.0: USB hub found
[ 0.998297] hub 5-0:1.0: 4 ports detected
[ 0.998517] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.998523] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 0.998580] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
[ 1.028176] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.055675] hub 6-0:1.0: USB hub found
[ 1.055685] hub 6-0:1.0: 5 ports detected
[ 1.055891] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.055896] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.055912] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
[ 1.112371] hub 7-0:1.0: USB hub found
[ 1.112380] hub 7-0:1.0: 5 ports detected
[ 1.112585] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.112589] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.112604] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
[ 1.169060] hub 8-0:1.0: USB hub found
[ 1.169069] hub 8-0:1.0: 2 ports detected
[ 1.169230] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.169234] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.169248] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
[ 1.225793] hub 9-0:1.0: USB hub found
[ 1.225802] hub 9-0:1.0: 4 ports detected
[ 1.226758] scsi host0: pata_atiixp
[ 1.226866] scsi host1: pata_atiixp
[ 1.226908] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.226910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.226935] ahci 0000:00:11.0: version 3.0
[ 1.227077] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.227079] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.227581] scsi host2: ahci
[ 1.227687] scsi host3: ahci
[ 1.227790] scsi host4: ahci
[ 1.227894] scsi host5: ahci
[ 1.227941] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 1.227943] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 1.227945] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 1.227947] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 1.228069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.228071] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.228368] scsi host6: ahci
[ 1.228467] scsi host7: ahci
[ 1.228518] ata7: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 32
[ 1.228520] ata8: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 32
[ 1.271654] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.389601] ata1.00: supports DRM functions and may not be fully accessible
[ 1.389604] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
[ 1.389606] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.390019] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.395403] ata1.00: supports DRM functions and may not be fully accessible
[ 1.395767] ata1.00: configured for UDMA/33
[ 1.395882] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.403230] hub 1-1:1.0: USB hub found
[ 1.403326] hub 1-1:1.0: 4 ports detected
[ 1.528533] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550700d0d00, S400
[ 1.531822] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1.541816] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.541830] usb 7-4: new full-speed USB device number 2 using ohci-pci
[ 1.548468] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.700539] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.705803] usbcore: registered new interface driver usbhid
[ 1.705804] usbhid: USB HID core driver
[ 1.707736] input: Turtle Beach Turtle Beach PX21 Headset as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.3/0003:10F5:0235.0001/input/input2
[ 1.711930] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711950] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.711968] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.714459] ata5.00: ATAPI: ATAPI iHAS424 B, GL14, max UDMA/100
[ 1.715245] ata5.00: configured for UDMA/100
[ 1.724780] ata6.00: ATAPI: ATAPI DVD A DH16A3L, 8H1F, max UDMA/100
[ 1.727806] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-4/input2
[ 1.738060] ata6.00: configured for UDMA/100
[ 1.738990] ata4.00: ATA-8: ST3750528AS, CC44, max UDMA/133
[ 1.738992] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.752852] ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 1.752855] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.758678] hid-generic 0003:10F5:0235.0001: input,hidraw1: USB HID v1.00 Device [Turtle Beach Turtle Beach PX21 Headset] on usb-0000:00:12.0-2/input3
[ 1.778584] ata4.00: configured for UDMA/133
[ 1.811234] ata3.00: configured for UDMA/133
[ 1.811298] scsi 2:0:0:0: Direct-Access ATA ST3250620AS E PQ: 0 ANSI: 5
[ 1.811508] scsi 3:0:0:0: Direct-Access ATA ST3750528AS CC44 PQ: 0 ANSI: 5
[ 1.815331] scsi 4:0:0:0: CD-ROM ATAPI iHAS424 B GL14 PQ: 0 ANSI: 5
[ 1.827195] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH16A3L 8H1F PQ: 0 ANSI: 5
[ 1.838181] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.838236] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.838264] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.838266] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.838275] sd 0:0:0:0: [sda] Write Protect is off
[ 1.838279] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.838281] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.838307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838310] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.838312] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.838324] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.840319] sda: sda1 sda2
[ 1.840687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.851264] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.851267] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.851394] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.853588] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.853870] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.859267] sdb: sdb1 sdb2
[ 1.859479] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.864173] sr 5:0:0:0: [sr1] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.864316] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 1.895367] tsc: Refined TSC clocksource calibration: 4018.371 MHz
[ 1.972095] usb 7-5: new full-speed USB device number 3 using ohci-pci
[ 2.143199] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0006/input/input3
[ 2.143245] hid-generic 0003:1532:0016.0006: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 2.345643] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.564353] random: nonblocking pool is initialized
[ 2.896115] Switched to clocksource tsc
[ 2.989972] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
[ 4.146364] EXT4-fs (sdc2): re-mounted. Opts: data=ordered
[ 5.242062] systemd-journald[198]: Received request to flush runtime journal from PID 1
[ 5.820530] ACPI: acpi_idle registered with cpuidle
[ 5.827968] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.088745] MCE: In-kernel MCE decoding enabled.
[ 6.088830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.088835] ACPI: Power Button [PWRB]
[ 6.088901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.088903] ACPI: Power Button [PWRF]
[ 6.090720] wmi: Mapper loaded
[ 6.183901] EDAC MC: Ver: 3.0.0
[ 6.185457] AMD64 EDAC driver v3.4.0
[ 6.185490] EDAC amd64: DRAM ECC disabled.
[ 6.185502] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.196328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.252091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.252149] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.309452] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.309546] r8169 0000:04:06.0 (unnamed net_device) (uninitialized): not PCI Express
[ 6.309823] r8169 0000:04:06.0 eth0: RTL8169sb/8110sb at 0xffffc90000648000, d8:eb:97:81:7b:88, XID 10000000 IRQ 20
[ 6.309826] r8169 0000:04:06.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 6.316117] [drm] Initialized drm 1.1.0 20060810
[ 6.322842] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.322904] sp5100_tco: PCI Revision ID: 0x42
[ 6.322936] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.322947] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.322994] sp5100_tco: initialized (0xffffc9000064ab00). heartbeat=60 sec (nowayout=0)
[ 6.370784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.405509] r8169 0000:04:06.0 enp4s6: renamed from eth0
[ 6.666521] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.666531] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.728492] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.728504] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.728512] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.728518] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.728523] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.728528] sound hdaudioC0D0: inputs:
[ 6.728534] sound hdaudioC0D0: Front Mic=0x19
[ 6.728540] sound hdaudioC0D0: Rear Mic=0x18
[ 6.728545] sound hdaudioC0D0: Line=0x1a
[ 6.732452] AVX version of gcm_enc/dec engaged.
[ 6.732455] AES CTR mode by8 optimization enabled
[ 6.751090] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.751373] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.751805] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.752652] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.752768] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.752834] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 6.752899] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 6.752956] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 7.043010] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.043204] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 7.043899] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 7.094444] Adding 16777212k swap on /dev/sdc3. Priority:-1 extents:1 across:16777212k FS
[ 7.117737] usbcore: registered new interface driver snd-usb-audio
[ 7.126713] nvidia: module license 'NVIDIA' taints kernel.
[ 7.126718] Disabling lock debugging due to kernel taint
[ 7.138096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.138428] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 7.138435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015
[ 7.485021] input: Logitech K400 as /devices/pci0000:00/0000:00:13.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0005/input/input18
[ 7.485233] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:13.0-4:1
[ 7.540890] mousedev: PS/2 mouse device common for all mice
[ 7.683577] kvm: Nested Virtualization enabled
[ 7.683587] kvm: Nested Paging enabled
[ 8.915498] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.970005] microcode: CPU0: new patch_level=0x06000832
[ 8.988739] microcode: CPU2: new patch_level=0x06000832
[ 8.994855] microcode: CPU4: new patch_level=0x06000832
[ 9.013677] microcode: CPU6: new patch_level=0x06000832
[ 9.123268] it87: Found IT8728F chip at 0x228, revision 1
[ 9.123288] it87: Beeping is supported
[ 10.039941] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0007/input/input19
[ 10.040305] hid-generic 0003:1532:0016.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 10.361662] r8169 0000:04:06.0 enp4s6: link down
[ 10.361761] r8169 0000:04:06.0 enp4s6: link down
[ 10.701964] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.041655] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0008/input/input20
[ 11.042019] hid-generic 0003:1532:0016.0008: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 12.042896] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0009/input/input21
[ 12.043111] hid-generic 0003:1532:0016.0009: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 13.308991] NVRM: Your system is not currently configured to drive a VGA console
[ 13.308995] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 13.308996] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 13.308998] NVRM: drivers including, but not limited to, vesafb, may result in
[ 13.308999] NVRM: corruption and stability problems, and is not supported.
[ 13.823977] r8169 0000:04:06.0 enp4s6: link up
I figure there is plenty of unnecessary info in the dmesg and I apologize, but I want to find the problem of this illusive RAM.
My system specs:
AMD FX-8350
4x4gb CMZ8GX3M2A160 Corsair RAM
Gigabyte GA-990FXA-UD3
NVidia GT 640
Please can someone guide me to the answer of the missing RAM?
Last edited by vuvffufg (2015-04-02 18:37:31)Yes it is 64bit:
[vuvffufg@HereAndNow-Main ~]$ uname -a
Linux HereAndNow-Main 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux -
Back up contacts from Samsung Reality to Droid 2X
I went on backup assistant and kept getting Flash errors. I have a Samsung Reality and I am upgrading to a Droid 2x in the next day or so. I wanted to back up my contacts but the FAQ on that subject don't seem to apply to me or the SR - (downloading the BA software). I went through all the steps but when it came to download or purchase the app, the Flash allow dialog pop up froze. Tried it three times.
I have a good data plan with the SR - so can I back up contacts or will I have to manually re-enter in the Droid?Nevermind! I figured it out!
-
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
Snow Leopard Samsung ML-1630 Crashes entire system - what's wrong?
The printer will print, but the entire system crashes and the Mac Mini reboots each time a print job is sent. The forum points out a lot of problems with printers and the Snow Leopard upgrade, but no real help seems to have been offered.
I did download the new Samsung drivers recommended for snow leopard using the Apple link
I have removed and reinstalled the printer, several times
What's wrong? Did Apple test this before they launched the new software?
I bought the printer from an Apple store, I hope they support it still.I agree with William on this. I use the same printer with just native OSx support.
There is one possible issue. The power that the printer draws when printing is pretty significant. My UPS (AVR) kicks in every time I print there. I do have many devices on this circuit though.
It is possible that your voltage is being pulled so low that your machine is rebooting.
If possible try the printer on a different circuit or turn off as much as possible equipment on the same circuit and give it a try. -
How Do I Transmit Audio from My 2008 MacBook Pro to My 2011 Samsung HDTV?
Hello,
I'm trying to transmit audio from my 2008 late model MacBook Pro to my 2011 Samsung HDTV. My MacBook's Model Identifier is MacBook Pro 4,1 (ancient, I know). I purchased this DVI to HDMI cable which does a beautiful job of transmitting the video to my HDTV, but no audio (as advertised): http://www.amazon.com/gp/product/B000E8SY5Q/ref=oh_o02_s01_i00_details HELP!!
Thanks very much.I figured it out! I plugged in my 3.5MM auxillary cable I use to plug my iPhone into car stereo jacks from the headphones port on my MPB to the "PC/DVI Audio In" on the back of my Samsung HDTV and voila! It worked! No additional cables (other than these two). No upgrading OS. Yay!
Here's the auxillary cable: http://www.amazon.com/AUDIO-3-5MM-JACK-AUXILIARY-CABLE/dp/B002Q3K0QS/ref=sr_1_1? ie=UTF8&qid=1330576344&sr=8-1
This looks like a great workaround to the MPB to HDTV audio problem! Hopefully my geek status is still intact. W00T!
When in doubt, try all the cables you have in all the different ports. AV hasn't changed much over the years and you can often rig things to work with what you already have. Yay for keeping cables out of landfills and repurposing!
Maybe you are looking for
-
Issue in calling WebDynpro ABAP iView in UWL
Hi, We have configured UWL to our ECC system successfully. In our UWL for a task TS90105432, when the users click on work item in their UWL Inbox, initially UWL launches a standard page in new window. On this page users can see a link u201CNote for A
-
GUI_DOWNLOAD - columns misplaced in excel
1.As per my requirement the user want the report to displayed in excel without displaying on the screen.So the user enters the path where they want this report to be downloaded in the select option screen. 2.We are using the function module GUI_DOWNL
-
Hi, We have found from one of the blog that following are the steps for configuring the ABAP PROXY. 1.Create HTTP connection in the business system. 2.Configuration Business system as local Integration Engine. 3.Connection between Business System and
-
Macbook just working...any ideas?
My Macbook just stopped working. In the evening it was working, but when I woke up the next morning, it was not working. I changed power cords, but it was not the charge. Do you have any ideas what else it could be? I purchased it in 2008. Thanks.
-
Automatic import statements for jsp's?
Is there a feature in Workshop 9.x's jsp editor that will automatically resolve (or prompt to resolve) classes in use which have not yet been imported into the page? A blue box appeared in 8.x and you could select the class to import, but I'm not fin