Arch64 on Samsung NF310 netbook?

Hi there,
As a previous satisfied nc10 owner I just got my nf310 netbook from samsung. It comes with the atom n550 processor which supports 64 bit. And now there's my question: Should I install the 64bit version of arch? I never really thought about it deeply with my other systems, I just installed 64bit if the processor supported it, but do you think maybe I will LOOSE some performance on my netbook other than having a little bit more memory usage in comparison to 32bit? I should probably also mention that I upgraded the internal 1gb of ram to the hardware maximum of 2gb. Amusingly my main reason to worry with 64bit linux is STILL flash. especially on netbooks
what do you guys think?

I would. I have had little to no issues with flash on x86_64 as of lately (other than flash sucks in general). At this point, I see no reason not to use Arch64 on all (3) of my 64 bit systems. Multilib comes in handy when need be, too.

Similar Messages

How do I print from my Samsung NC10 netbook to my HP Office jet 4620 wireless printer

I have set up my wireless printer on my HP desktop PC. - works fine - Windows 8
How do I set up my Samsung NC10 Netbook to enable me to see the printer - Windows XP.
My netbook does not have a CD/DVD driver.
I am not sure what software I need to downoad as I am a novice.

Hi,
Please download drivers from the following link and install on your Windows XP machine:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=51916...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Arch64 on Samsung NC20

hi all,
this is my first post and it is the first time that i'm using arch (decade long slackware addict here)
I was wondering whether somebody uses arch on the samsung nc20. i haven't found one single post in the forum about it, is it because no one uses it or because everything runs smoothly?
i got arch64 installed on the machine and everything is working fine, except that the screen won't come up after suspend or hibernate.
I am using openchrome because the proprietary via gfx driver doesn't work with xorg 1.6 (i would be using it anyway since i tend to prefer free software, and the via driver apparently sucks)
I'm using the latest git kernel (2.6.31-rc4-git3) for all the Via Nano goodies to work (padlock for ssl encryption, RNG, cpu frequency scaling).
Has anyone managed to get suspend/hibernate work on this machine?
Does anyone have some experiences to share?
thankyou!
Last edited by hjk (2009-08-27 22:48:34)

I just tried the newly released official drivers on x86_64. The xorg module loads but X crashes sistematically.
I tried to disable vbe in xorg.conf because i think the issue is related to it, but still no luck.
here is Xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux weiss 2.6.31-rc7 #1 PREEMPT Wed Aug 26 20:12:10 UTC 2009 x86_64
Build Date: 25 August 2009 09:11:18PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 27 20:12:15 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "RandR" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x15c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:1:0) 1106:1122:144d:c04e VIA Technologies, Inc. VX800/VX820 Chrome 9 HC3 Integrated Graphics rev 17, Mem @ 0xd0000000/268435456, 0xf4000000/16777216, 0xf0000000/67108864, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) "vbe" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 5.74.255
Module class: X.Org Video Driver
(II) via: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,
P4M900, VX800, VX855
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "viavideo"
(II) LoadModule: "viavideo"
(WW) Warning, couldn't open module viavideo
(II) UnloadModule: "viavideo"
(EE) VIA: Failed to load module "viavideo" (module does not exist, 0)
(WW) VIA(0): Couldn't open viavideo
(--) VIA(0): Chipset: "VX800"
(--) VIA(0): Chipset Rev.: 0
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VIA(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) VIA(0): VESA BIOS detected
(II) VIA(0): VESA VBE Version 3.0
(II) VIA(0): VESA VBE Total Mem: 32768 kB
(II) VIA(0): VESA VBE OEM: VIA VX800
(II) VIA(0): VESA VBE OEM Software Rev: 1.0
(II) VIA(0): VESA VBE OEM Vendor:
(II) VIA(0): VESA VBE OEM Product:
(II) VIA(0): VESA VBE OEM Product Rev:
(**) VIA(0): Option "ActiveDevice" "LCD"
(**) VIA(0): Option "LCDPort" "LVDS0"
(**) VIA(0): Option "PanelSize" "1280x800"
(==) VIA(0): Using XAA acceleration architecture.
(II) VIA(0): MergedFB mode forced off.
(**) VIA(0): Active Device is LCD.
(**) VIA(0): LCD Panel Size is 1280x800.
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): VGA BIOS Version is = 5.0
(II) VIA(0): VGA BIOS Release Date Is: 2008/12/1
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 262144k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
Backtrace:
0: /usr/bin/Xorg(xorg_backtrace+0x26) [0x4e9186]
1: /usr/bin/Xorg(xf86SigHandler+0x6f) [0x47612f]
2: /lib/libc.so.6 [0x7fcefeaa2f90]
3: /usr/lib/xorg/modules/drivers//via_drv.so(viaWriteVgaIo+0x24) [0x7fcefd2ae2e4]
4: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2ae68f]
5: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2aea47]
6: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2aeb11]
7: /usr/lib/xorg/modules/drivers//via_drv.so(viaSerialReadBytes+0x48) [0x7fcefd2aecb8]
8: /usr/lib/xorg/modules/drivers//via_drv.so(VIADoEDID+0x13d) [0x7fcefd2dbd1d]
9: /usr/lib/xorg/modules/drivers//via_drv.so [0x7fcefd2dd89d]
10: /usr/bin/Xorg(InitOutput+0x507) [0x468e27]
11: /usr/bin/Xorg(main+0x1fe) [0x42e5be]
12: /lib/libc.so.6(__libc_start_main+0xfd) [0x7fcefea8f9ed]
13: /usr/bin/Xorg [0x42dbf9]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Broadcom BCM2070 Bluetooth 3.0 HS

Hi Team - I have a Samsung NF310 netbook running Windows 7 starter. I have Broadcom BCM2070 Bluetooth 3.0 + HS USB device and Bluetooth Enumerator
Trying to use a Marley Chant bluetooth speaker. It will pair OK but when I go to play it says not initialised, when I go to Device Manager I see Peripheral Device with yellow exclamation mark, double click on that gives me properties which say Drivers not downloaded. I use the "download drivers" button but I get message none can be found.
Can you help please , Pete.
PS I have been to every site I can think of but to no avail.

Petecart wrote:
Hi Team - I have a Samsung NF310 netbook running Windows 7 starter. I have Broadcom BCM2070 Bluetooth 3.0 + HS USB device and Bluetooth Enumerator
Trying to use a Marley Chant bluetooth speaker. It will pair OK but when I go to play it says not initialised, when I go to Device Manager I see Peripheral Device with yellow exclamation mark, double click on that gives me properties which say Drivers not downloaded. I use the "download drivers" button but I get message none can be found.
Can you help please , Pete.
PS I have been to every site I can think of but to no avail.
Hello Petecart.
This site is specifically for troubleshooting HP products. I suggest you contact Samsung support to resolve your issue.
Here is a link to their support site.
Have a lovely day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Help cloning a System (Netbook Samsung NC10) SOLVED

Hi.
I have successfully installed arch in a Samsung NC10 netbook, I have reduced the Windows Partition to 40 GB and used the rest for Arch. I have the system full configured and working.
Now I have 2 more identical Samsung NC10 to install. I have been looking ate different ways to clone the installation, one option was looking at g4u as I liked to clone full disk (including windows, etc), I have installed guu in a usb key, booted and the problem is that g4u does not detect the network interface :-(
I was thinking of using dd and ssh to dd the whole disk by ssh from a NC10 to the other
but I need a usb live system with sshd installed (any arch that satisfy this?)
I also have a third system that could use as an intermediate sshd server for storing the hd dd image
do you think this could work?
Or there is another best way to do this?
any help appreciated
Thanks
Last edited by clmates (2009-07-28 12:09:35)

clmates wrote:
I was thinking of using dd and ssh to dd the whole disk by ssh from a NC10 to the other
but I need a usb live system with sshd installed (any arch that satisfy this?)
I've done that before, though it is a bit faster to use dd an netcat:
http://www.cyberciti.biz/tips/howto-cop … twork.html
The arch live-usb is a regular Arch system. You can install any package with pacman, including sshd.

Help netbook slow new

Ok my samsung n130 netbook is very slow .I went back to best buy and bought bigger memory 2gigs still slow .Please tell me what else to do.....thanks
Solved!
Go to Solution.

Jaxjags2100 wrote:
Don't upgrade to 7 you're better with XP. Two items I'd suggest downloading.
1. CCleaner found at www.ccleaner.com
- Run it to clean your system of junk and also run the registry cleaner as well
2. Auslogics Disk Defragmenter found at www.auslogics.com or www.download.com
- In my experience it's the quickest and most efficient disk defragger I've come across.
The netbook already comes with Win7 Starter.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Flash player is so slow on my new netbook!

Hi. I am running Ubuntu Netbook Edition on a Samsung NB30 netbook. Every time I play or use something that involves Adobe's flash, the performance is terrible. The BBC iPlayer desktop (which uses Adobe Air) is also really bad!!
No other programs on this netbook - except Adobe's Flash and Air - make it slow and flash player crashes about once a day in Google Chrome.
Are Adobe even aware that Flash and iPlayer Desktop (which uses Adobe Air) are so slow and unreliable on Linux??
Why is the performance this bad. Any ideas??????

Hi, I don't have any experience with your operating system, but I can give you some general info. First you want to go to this test site to see what version of Flash Player you have Installed and whether you can see the animation.
http://www.adobe.com/software/flash/about/
About BBC iPlayer, there are problems with their site and yes Windows users, with various browsers have problems also.
One thing that users are doing when they have Installed Flash Player 10.1 is turning off the hardware acceleration feature. Whey you go to that above test site, RIGHT click on the animation (Flash Player Logo) and click on Settings, then Display Settings.
Another thing that users have found is to make sure 3rd party content is enabled in the Global Settings Panel.
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
The following thread ( See Post # 10, 12 and 17) has info on the BBC iPlayer problems that other users had and what helped.
http://forums.adobe.com/thread/677670?tstart=0
Hope this information is helpful.
Thanks,
eidnolb

My wife's netbook is connected to infinity but won...

Hi.....I've just got infinity this week and have successfully connected to Laptop,iPhone, Wifi Printer and apple TV and they are all performing brilliantly.....however....although I have connected my wife's Samsung netbook to wifi successfully, when I open internet explorer or iTunes they will not connect.
If i connect it by cable ithey connect OK............Any thoughts????????

I presume the Netbook is close to the HH3... Suggest that just for testing ie to eliminate interference.
If it is and still no go....
You could log into your HH3 http://bthomehub.home/html/home/home.html
Go to Advanced settings - Wireless and try changing some settings.
Try moving the HH3 from Automatic to a fixed/set wireless channel..... Apply
If no luck
Try changing wireless interface setting to 802.11 b/g.... Apply
No luck.-
Also you could temporarily reduce the strength of your encryption.-
To WEP (64/40bit)... Apply.
I would hope at some point you would have got on line... Say to Google page.
If still no luck to prove the Netbook wireless card is working you could Briefly change your Encryption to
NONE.... Apply.
Check very quickly if you are on line.
This is a very risky step and I would make sure no other PC/Laptop/phones are on during this test.
Basically you have opened up your wireless signal so that anyone can connect onto your broadband and download.....
well anything!!! So that's why I say be brief for this test.
It would be intersting to see if at any point you have made a wireless connection.
Another Test you could try is see if you can log onto a FON/Openzone signal.
You should automatically be opted in to FON Check HERE.
If you are able to get an internet connection thru FON... or even go around a friends house and try and log onto their broadband with a wireless connection to your netbook and that works at their house.....
I would then suggest you double check the wireless key you used for your Home network...
There is a Handy pull out Tab in the top of the HH3 that you can pull out and use.
Then click on your netbooks wireless icon... lower right of your netbooks screen.
From the list of available wireless signals, click on your HH3 SSID signal.
Add the wireless key from that pull out tab... click connect and try that.
Please let us know your findings with these test, then we can take it from there...
ie May have to Update netbook's wireless driver or if still can't get the netbook's card to connect...
An easy fix could be to pop in a wireless n USB adapter that'll give you wpa2 encryption and full wireless n speed.
Specification of a small one HERE. Example of one for sale HERE.
Edit.-
Settings for HH3 to get the best speeds from Infinity would be the recommended position ie 802.11 b/g/n
This sends a wireless n signal out (Along with the other two types b and g).
Settings for the HH3 to have the most secure wireless encryption is the recommended WPA/WPA2 setting.
Channel selection setting for the HH3 I think is best to have this set to a clear wireless channel rather than "Automatic" imho.
To identify a clear/least used wireless channel there is a free scanner for PC's http://www.metageek.net/products/inssider/
Just a final thought.... I can't see why but maybe your Anti Virus is set too strong But to not allow Google well I doubt you could block that but double check things like that.... Mmmm but that would have blocked when you were wired so can't be that!!!
Also I presume you haven't set access control for the HH3 to ban that m/c during a particular time... Mmmmm but think that would still ban the Netbook when connected by ethernet which you say works... so ignore that bit as well... lol.
Btw my Samsung N220 Netbook with Win7 works well on my network and anywhere I take it... Tenerife, Caffee Nero etc I love it.
Far better connectivity than my recently purchased HP Touchpad which only seems to want to work on my home Network?????
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Samsung N150 Qualcomm Gobi Drivers

So i got the new Samsung N150 netbook, Its a dope little netbook except for one thing it comes with windows 7 starter. Windows Starter is complete garbage They did give the option to upgrade to the oth]] windows 7 OS for a nice FEE. So since i have purchased windows 7 ultimate for my previous netbook which i broke, i figured i would just do a nice fresh install of Win7 Ultimate. Installed great with no issues then i find out i need to get the qualcomm gobi drivers in order to use my embeded aircard. So i went to vzam.net to dl vzaccess manager for my particular model. I dl it & install & wait to my suprise the VZaccess manager for my model does not include the Qualcomm Gobi Drivers. Seriously verizon why the hell would you have a vzaccess manager for my model that doesnt include the drivers for the modem. THAT is just plain **bleep**..
THe funny thing is if i would upgrade directly from starter 7 to another version my drivers will carry over ..But if u do a fresh install your screwed.. I smell a conspiracy..
I have searched the net & i cannot seem to find the drivers can anybody out there help??
Thank You in Advance

OK now this was an actual answer! Thanks for the info, I never would have guessed that the CDMA driver for Win7 would be the driver I am looking for. Personally, I am not happy that Samsung would not provide recovery or reinstall discs (or better yet a reovery SD or thumb drive option). I prefer Linux on my systems, and when I installed Ubuntu 10.10 it decided that dispite my partioning options it would use the entire drive an wipe out the recovery partition. the Unbuntu GOBI 2000 drivers worked for 1 usuage then ubuntu stopped seeing the device so I no longer had WAN access. and with no recovery set I was forced to install WinXP Pro SP 2 from 2003 which of course does not had drivers for the N150 .... short story long ... got the netbook working again .. with broadband .. and FORGET SAMSUNG in the furture ... Acer at least provides reinstall options that are realistic to geekdom! BTW you can go through the process and burn yourself a bootable USB Pendive ... I was lazy before and will do that now!
raijala wrote:
Burned the recovery discs with what? The device does not come with any disc drive. It is ridiculous to expect the customer to purchase extra hardware just to be able to have the recovery or OS discs.
You can get the driver here
http://www.samsung.com/us/support/downloads/NP-N150-HAV1US
It is the CDMA driver for Win7 and I verified it works in XP as well.
VZAccess Manager for Samsung N150 is at the bottom of this page:
http://www.vzam.net/download/supported.aspx

Samsung's Four Seasons of Hope - October!

Best Buy® is proud to partner with Samsung and NFL quarterback Eli Manning to support Four Seasons of Hope, a philanthropic program dedicated to improving the quality of life for children and families throughout the country. The initiative has provided financial support for many community-based foundations and charities over the past eight years by Samsung Electronics America, Inc.
What does this mean for you?
Now through the end of October, when you buy any Samsung TV, home theater system, Blu-ray player or DVD player at Best Buy®, a portion of the proceeds will be donated to non-profit charities benefiting youth education.
Vote online for how the funds are divided up between Samsung’s charities of choice! See @15 (www.at15.com) to learn more!
Eli Manning invites you to enter for a chance to win part of over $1 million in prizes for your school (grades K-12). Click here to enter the contest, which includes writing a 100-word essay about how consumer electronics, computer equipment and software awarded through Samsung’s Four Seasons of Hope could benefit your school.
Winning writers will receive a Samsung Go™ Netbook and their nominated school will receive prizes from Samsung products, Microsoft software, DIRECTV educational television programming and cash grants, to special @15 gift cards supplied by Best Buy®.
See official rules.
http://www.fourseasonsofhope.com/us/4seasons_hope/rules.html
Elizabeth|Social Media Supervisor|Best Buy® Corporate
Private Message

OK. Well you won't have the manual tab order option. That came in with 6.1.
Tab order in earlier versions was usually determined by position on the slide (left to right) and order in the layer stacking (top to bottom).
If your TEBs are going down the page in more than one column, the order should be left to right across the slide, then returning to the left side again for the next line across (sort of a zig zag across and down the slide).

Firefox wont openfrom desktop. try to uninstall to reload firefox and it says its open and i have to close it first

samsung n150 netbook windows 7 starter operating system. just will not allow me to open it

Make sure that your security software (firewall, anti-virus) isn't locking files.
You can also try to delete or rename the Firefox program folder (C:\Program Files\Mozilla Firefox\) on your hard drive.

OfficeJet 4620 - cannot connect to wifi

Hi,
I took delivery of a new 4620 printer yesterday and have been stuggling ever since to connect it to wifi.
I'm running Windows 8 Pro 64 bit and have an Asus RT-N66U router (running Tomato firmware v1.28).
I've tried a number of different options including:
Ensuring I downloaded the latest HP software
Trying the HP Print and Scan Doctor
Changing the wifi security from WPA & WPA2 to each individually
Disabled windows firewall
The error message always the same:
Issue: Unknown
Solution: For the latest information about wireless connection to HP printers, plus access to help and support resources, click the link below.
Any suggestions gratefully received.
Xav

Hi,
Thanks for the response. I've tried a few more approaches and think I'm getting closer to isolating the issue.
The PC I originally tried to install with has Windows Defender and Windows Firewall. I tried a fresh install with the Firewall disabled but that had no effect.
I have since tried to do another install using a Samsung NC10 netbook (Win XP Home, MS Security Essentials) and get exactly the same issue. That said, the netbook is wifi enabled (unlike the PC mentioned above which is wired LAN only) and as such, the software grabbed the settings from the netbook automatically (but still the same error message. Oddly, it only suggested a WPA connection even when I changed the router setting from WPA/WPA2 to just WPA2.
I then focussed my attention on the router as two different PC's giving the same error suggests they arent the problem. Tomato is finding the printer and listing it in the Device List but there is no IP address listed. This is confirmed on the printer which continues to report that it is not wifi connected. I've also tried assigning a static IP in the router and rebooting both router and printer but it just doesnt seem to want to assign an address.
Next I tried manually assigning the IP address in the Advanced Network settings on the printer but no matter what I do, it seems determined to stay stuck on the Automatic Network setting rather than Manual.
When I printed the Wireless Network Test results, there is a Fail listed again No Filtering and against IP Address it states Not Applicable
Any other suggestions?

Bad intel graphics performance on nc10

hi there,
i'm experiencing a stuttering flash video playback performance on my netbook and i remember that it used to be better. my specs:
samsung nc10 netbook
no xorg.conf, kms enabled, glxgears shows 100fps
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
flashplugin 10.0.45.2-1
intel-dri 7.7.1-1
xf86-video-intel 2.10.0-1
xorg-server 1.7.6-3
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux martin-netbook 2.6.32-git10-NC10 #1 SMP PREEMPT Sun Apr 4 02:05:15 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/b2b696d0-6f88-4ceb-9a57-e9bb0e355abe resume=/dev/sda2 usbcore.autosuspend=1 i915.modeset=1 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 4 17:32:05 2010
(==) Using config file: "/etc/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27ae:144d:ca00 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf0000000/524288, 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:27a6:144d:ca00 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf0080000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "NoDRI"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x600
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right
(**) Option "SHMConfig" "on"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "TouchpadOff" "0"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) Option "AlwaysCore" "true"
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event1"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(II) intel(0): EDID vendor "CPT", prod id 1220
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): EDID vendor "CPT", prod id 1220
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): EDID vendor "CPT", prod id 1220
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): EDID vendor "CPT", prod id 1220
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
[mi] EQ overflowing. The server is probably stuck in an infinite loop.
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809f81b]
1: /usr/bin/Xorg (mieqEnqueue+0x1ab) [0x809856b]
2: /usr/bin/Xorg (xf86PostButtonEventP+0xcf) [0x80a37ef]
3: /usr/bin/Xorg (xf86PostButtonEvent+0x6c) [0x80a389c]
4: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb6ed9000+0x338d) [0xb6edc38d]
5: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb6ed9000+0x57ed) [0xb6ede7ed]
6: /usr/bin/Xorg (0x8048000+0x6663f) [0x80ae63f]
7: /usr/bin/Xorg (0x8048000+0xf95b4) [0x81415b4]
8: (vdso) (__kernel_sigreturn+0x0) [0xb7783400]
9: /usr/bin/Xorg (0x8048000+0x40170) [0x8088170]
10: /usr/bin/Xorg (0x8048000+0x1a705) [0x8062705]
11: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb737ab86]
12: /usr/bin/Xorg (0x8048000+0x1a2f1) [0x80622f1]
what i don't like in my logs is the following:
(**) intel(0): Option "NoDRI"
is dri disabled? then why can i use glxgears (3d-acceleration)? how can i modify this or is this even related to my problem?
thanks in advance

What happens if you replace xf86-video-intel-2.10 with 2.9?

Network not showing up on Linux (Ubuntu 13.10)

Product: Linksys Wireless-G 2.4 GHz 54Mbps Broadband Router WRT54G v.4
OS: Ubuntu 13.10 on Samsung N150 Netbook -- works when hardwired into router, but not wirelessly
OS: Windows 7 on Lenovo Windows 7 PC -- does not work even hardwired in
Was working fine for over a year, but all of a sudden the network disappeared from the Wireless list this afternoon.
Solved!
Go to Solution.

Wireless Configurations
What wireless modes are you using?
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK [/url] only or Auto TPIK and AES.
What wireless devices do you have connected?
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.metageek.net/support/metageek-software-archives/ to find out. How many?
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.

Minmal Custom Kernel 2.6.29.6 for NC10 - fatal: acpi_cpufreq

Hi,
I try to compile a minimal custom kernel based on 2.6.29.6 for my Samsung NC10 netbook. Main reason is to get the namuga webcam running (doesn't work with 2.6.30) but also to get something optimised (boot-speed).
The kompilation and the kernel work and the webcam work, but I have two issues:
1. During boot I get the message:
Fatal: can't load module acpi_cpufreq
Fatal: can't load module cpufreq_powersave
Fatal: can't load module cpufreq_ondemand
Powertop as well doesn't show cpu-frequency values (what works with the standard kernel).
I however think I enabled all I need in .config (acpi support, ... cpu_frequ_scaling, .. acpi_cpufrequ )
# Power management and ACPI options
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
# CPU Frequency scaling
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CPUFreq processor drivers
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
# shared options
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
After several try's I'm now a bit help less ? - any suggestions ? - a few more points
- I use the "Custom Kernel with ABS" method from arch wiki
- during installation of the kompiled and packaged kernel with pacman I see that mkcpio makes a ramdisk for the standard - kernel (which I don't understand)
- by the way the kernel I do starts without ramdisk
2. The other issue is that the boot process rests quite a while at udev - events (6s) - any ideas

Hi,
I try to compile a minimal custom kernel based on 2.6.29.6 for my Samsung NC10 netbook. Main reason is to get the namuga webcam running (doesn't work with 2.6.30) but also to get something optimised (boot-speed).
The kompilation and the kernel work and the webcam work, but I have two issues:
1. During boot I get the message:
Fatal: can't load module acpi_cpufreq
Fatal: can't load module cpufreq_powersave
Fatal: can't load module cpufreq_ondemand
Powertop as well doesn't show cpu-frequency values (what works with the standard kernel).
I however think I enabled all I need in .config (acpi support, ... cpu_frequ_scaling, .. acpi_cpufrequ )
# Power management and ACPI options
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
# CPU Frequency scaling
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CPUFreq processor drivers
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
# shared options
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
After several try's I'm now a bit help less ? - any suggestions ? - a few more points
- I use the "Custom Kernel with ABS" method from arch wiki
- during installation of the kompiled and packaged kernel with pacman I see that mkcpio makes a ramdisk for the standard - kernel (which I don't understand)
- by the way the kernel I do starts without ramdisk
2. The other issue is that the boot process rests quite a while at udev - events (6s) - any ideas

Arch64 on Samsung NF310 netbook?

Similar Messages

Maybe you are looking for