Archieving the measurement points

Hi friends
I would like to know how to archieve the measurement point . Unfortunately we have created the counter in production system without requirement. Now we want to remove the same. But we are not finding the object in SARA to remove the same.
Please help on this
Regards
Thenna

Hi
Why dont you go for Deleting for the Measurement point for Equipment or FL in change mode IE02 or IL02 then press Shift+F2
If you created any Measurement documents for above Measurement Point the first you have to Archiev the them using Object PM_IMRG.Then go for deletion of Measurement point
Regards,
Rakesh

Similar Messages

Removing of the Measuring point and superior equipment

Hi,
Can any one tell me the steps to followed for removing and setting og deletion flag for measuring point and superior equipment.
I ran thr Tcode IK05 and deactivated it is it sufficient to do so.please help me.
Regards,
Yashwanth

hi
why you want to deactivate the measuring point ,if you have created a maintenance plan you can deactivate the maintenance plan so that system will not generate the maintenance call object.
or it is better you deactivate the equipment itself if you have done that you cannot able to enter further measurement documents for measuring point
regards
thyagarajan

How to make Measuring Point Description Field scrollable on the Detail Read Screen

In the Measuring Point Read Detail Screen (Rounds Manager), the description field does not have a scroll bar like it does on the Point Read Counter Detail Screen. This means that the end-user has to arrow-over to the right on the handheld device to see the entire description. We changed the transaction property to be the same as that on the measuring point field on the Counter screen but that did not resolve the issue. We are assuming that the field width is defined in columns but are not sure if columns is the same as pixels. It seems like there is some type of behind the sceens calculation based on the number of pixels used by the characters in the description. The transaction property does have word wrap activated but it seems to make no difference. Does anyone have any suggestions on what can be done to make the measuring point description have a scrollbar and have the description wrap? The Rounds Server is version 2.3.
Tags edited by: Michael Appleby

1. wall of unformatted code. Use \ tags when posting code.
2. you're not even asking a question. You're just saying "it doesn't work" and then you dump the code. What do you expect? That people now go to debug it for you?

Deletion of Measuring points from the Notification

Hi
I have created a notication and attched manully some measuring point. (Extras-->Measuing document, New Entries and added the measuing points). I want to delete the measuring points from the notification. It displayes the msg "1 MeasDocs cannot be deleted as they already exist in the database"
Note:The measuring points are not attached to the tech object.
Please let me know how can we delete this MP's or what alternative i need to follow.
The system msg display below:
HELP msg "
1 MeasDocs cannot be deleted as they already exist in the database
     Message no. IR 018
Diagnosis
     You are trying to delete measurement documents that the system has
     already written to the database.
System Response
     The system cannot perform the function.
     You can only delete measurement documents online at the creation stage.
     Once you have saved a measurement document, you can only delete it using
     a special reorganization program."
Thanks & regards,
Mujeeb

hi
For using archiving programme take help of basis help see firstly create programme on archiving object
PM_IMRG whcih is the object for measuring document then by ebtering this prepare the archving file run in test mode
then deletion of data with date wise reading in test mode follwed afterwards.
you have to confirm the data before the deletion
Regards
chandrashekhar

How to control the authority of measuring point when creating

hi,expert
I want to control the authority of the measuring point when creating the measuring point in Ik01.That is I can check the authority object of the measuring point object (equipment of function location) when I create .The sandard system can only provide the authority check of T-CODE and AuthorizGroup. On the other hand there is no customer-exit to do this .Please give me a solution .
Thank you
Edited by: Fengxi Zhao on Dec 17, 2008 8:35 AM

Dear Sir
Can you clearify the requirement in detailed? What exactly you want to prevent & You want to authorise for ??
Regards

Auto Update of measuring point/document

Dear all,
I have one issue over here.Measuring point/document is not updating automatically after productiuon order confirmation . I tried with following steps
1) Created the equipment as test equipment -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this eqipment as a PRT in the routing of material .
Which steps i am missing
Thanks

Hi
I had faced the same problem when I used SAPF02 then I did following changes.
Created formula like SAP_09 * PRTSTD / SAP_08
SAP_09 : Operation Qty
PRTSTD : PRT Standard Value
SAP_08: Base Qty.
Also make sure the measuring point category should me T in IK02( PRT life counter)
Regards,
Raj

Maintenance Order through Measuring Point

Dear all,
I want to know whether it is possible to create the maintenance order on the basis measuring point .
I know how to create the order on the basis of measuring counter.
Is there any procedure to create the maintenance Order through measuring point as done in case of counter?
kindly provide the solution for Creation of Maintenance Order using Measuring Point..

Really very thanks for the solution.
I have one more query, we can create the measuring point using the t.code IK01.As you told we have to create the measuring point with upper and lower range.
Is that we have to create 2 measuring point for upper as well as lower range or in one measuring point it is possible to accumulate both the upper and lower range.
If it is possible to accumulate both the upper and lower range in one measuring point then kindly provide the procedure.
Thanks in advance.

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Function Module to get usage by supplying measuring point and equipment no

Hi,
I want to know what is the function module to get the usage on giving the measuring point,equipment number and month.Thanks in advance.
Regards,
SGR

Try this Function Module : ALM_ME_EQUIPMENT_GETDETAIL

Update Measurement Points on Functional Locations

Hello Experts,
I need create a custom program to update (add/delete/change) the measurement point's POSITIONS on functional locations. Basically the users want to clean up the functional locations which have some wrong data in them. Since I am very new to this functionality area, Can anybody please let me know - Is there a FM/Bapi to update the Measurement Point Positions on Functional Locations?
I appreciate your help.
Thanks.
Edited by: sey ni on Mar 7, 2011 4:49 PM

I think I will have to write a BDC on IK01/IK02 transactions. Not sure, if we have a better solution.

Copy Measuring Point from 1 FL to other FL

Hi,
I need to copy the Measuring Point( General Data, Counter Data & Classfication) from 1 Func Location to another Func Location.
Please suggest me...
regards,
Venkatesan Anandan

HI,
As suggest Pete, Plese go to IL01 and enter the referece functional location, then press enter
once you press enter pop will appear , where you select measuringpoint, class etc as required by you
then automatically data will transfer to new functionallocation which u creted.
regards
Krishna

Propose Measuring point automatically in IW42

Hi,
I have assigned a measuring point as PRT to the operation of an Order. During confirmation in IW42, after entering the order number system proposes the operation details and I need to click button meas.points Inspn planning to display the measuring point assigned to the operation. But now my requirement is, system should propose the measuring point automatically, along with operation details, when I enter the order number in IW42 as user will forget to click button meas.points Inspn planning.
Could anybody suggest how this requirement can be met?
Thanks and regards,
Basavaraj

Hi James,
Thanks for your reply.
Yes, I have configured confirmation profile and same has been selected in IW42. I can see screen area for measurement document in IW42. Now my requirement is, I want the system to display the measuring point automatically, which is assigned to operation as PRT, when I enter the order number in IW42 ans press enter.
Thanks and regards,
Basavaraj.

Measuring point Not on device

Hi ALL
We are on MI 7.1.
We are facing an issue with Measuring points. During the first sync the Measuring points were downloded to the device.
We created new Measuring points in R/3 and these new ones are available on the Middleware but on the device.
The Funct Locations linked to these Measuring points are available on the device. There are other Measuring points available for these Funct. Locations ( downloded during the first sync) but the new Measuring points are not available on device.
Did someone came across this issue, what can be the reasons behind this?
Regards
Manish bansal

Hi
The query is resolved.
I have to run the program MEREP_REPLICATOR_START for Funct. Location also.
After running the program it worked.
Regards
Manish

Measuring point and characteristics

what are the measuring points and characteristics to be created for the thermal power station , sap plant maintenance

Hi,
Its based on the equipments in Power Station & Parameters to be measured for the Equipments. For example, for Boiler, Temperature, Pressure, Water Level, etc., will be measured.
So here we need to create Characteristics for all these. For Boilers, Measuring points will be created for these characteristics.
Equipments under Thermal Power stations could be Boilers, Transformers, Electric Generators, Coal Turbines, Condensers, etc., For each equipment, there will be different critical parameters to be measured on periodical basis.
Create Measuring points for all of them.
Regards,
Maheswaran.

Measuring Point for Tools and Die Maintenance

Dear All,
I am trying to map the following process:-
My client has 10 press machines and around 250 Dies for punching. Dies are assembled to press machines and they produce jobs by punching.
Client has an Preventive Maintenance plan for each Die in terms of number of strokes punched by an Die. for e.g PM is done after every 300000, 600000, 900000, 1200000 strokes. Estimated life is 1200000.
What they want is when production person confirms the production order say for 10000 jobs the counter of the die should increase by 10000.......and so on. When the counter reaches 300000 preventive maintenance call should be scheduled.
What i have done is created an Die as an Equipment with PRT as equipment category. Created an measuring point for that Die, assined Usage formula etc.
I have created an Maintenance plan for that die in which i have assigned the strategy (IP11) which contains the stroke cycles 300000, 600000.........etc.
Assigned the Die as a PRT to the material which is to be produced in the Routing.
When i confirm the production order the counter of the PRT increases which i can check IK13.
What i am expecting is that in IP10 system should update the counter automatically so that when the counter reaches to 300000 maintenance call wil be scheduled and order will be generated.
I would request you to please give me some input on this.
Thanks and Regards,
Rashmi

Hello Rashmi;
I have seen the screen shots & there are problems with the following:
1) Counter overflow reading
You have entered 130; keep it as- 999999 (it is the reading after which system starts counting from 0 value)
2) Formula that you have used;
You have used the formula- SAPF02; do not use this. Create you own formula with following details: SAPF99 (new formula) = SAP_20 * SAP_09
3) You have manually entered the reading for the measuring point; do not use it. System will calculate the measurement reading from PRT usage value.
CREATE a single measuring document with reading as '0'.
4) Also in CA01; you need to assign this PRT in routing with "EQUIPMENT" & not material. Also make sure that in the same screen (assignment of PRT- basic data) maintain usage value as 1 (if this is not maintained, measuring doc. will NOT be updated).
5) Now when you confirm the production order, based on number of units created; system will automatically create the measuring doc.
If there is any problem with CA01, CO01 or CO11n; ask your PP consultant to assist.
Do let me know if there is any problem in this.
Regards
Hemant

Archieving the measurement points

Similar Messages

Maybe you are looking for