Architectural design documents
Hi All,
I require bw architectural design documents ,anybody could u please help me in this regard
Thanks in advance
N.Prasad Babu
Hi Prasad,
Go through following listed books,
1> BW step by step.
2> Mastering BW
Hope this will help u.
Similar Messages
-
Any Toplink Architecture/Design doc available?
which explains how Toplink was designed? thanks
There is some documentation on the EclipseLink wiki:
http://wiki.eclipse.org/EclipseLink/Development/Architecture
http://wiki.eclipse.org/EclipseLink/Development/DesignDocs
The design docs only include new features since the migration from TopLink, the previous design documents are not currently available externally. -
Global Architectural design for SharePoint 2013??
Hi Friends,
i am trying to pursue SharePoint 2013 global Architectural design before we implement SharePoint 2013 farm. FYI, Our Current SharePoint 2010 farm is three tier farm (2 web servers + 2 App servers + cluster Sql server) and total users 1,000 and its
located in one data center. From this farm we are serving now SP site to five different countries in the world via WAN. But as our company growing rapidly, we want share point will provide robust performance. As our company globalized, how many data center
we will need? Can we have one centralized farm in USA and other regional SharePoint farms into different countries? According to my business scenario, what will be the best architectural design?
Any help will be appreciated!!"It depends" would be the answer with the information given. It depends on how much content is accessed at any one location, if a WAN accelerator could alleviate any issues end users at the remote locations were seeing, and if the company can take on the
added complexity, extra licensing, and hardware cost that are associated with SharePoint farms.
It would also depend if you want to replicate content (e.g. Metalogix Replicator) or if each farm will have its own unique content targeted at the specific region.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
If you have a membership with the apple developer community or know anyone who has and also resides within the united states, please contact.
The purpose is to partake in http://www.atari.com/pongdeveloperchallenge
The initial game design document is fully completed and the ideas expressed in it are more than strong enough to compete for the top prizes.
I'm well versed in different programming languages (c, scheme, js, assembly, python,...) as well as being a proficient sound designer and musician and a skilled graphics and animation manipulator myself. Assistance with the actual development would appreciated but is not really necessary.
Winnings and proceedings arising from participation would distributed most fairly. If you know anyone besides yourself that is able to help out, you would also be rewarded financially from an ensuing victory.
Reply to this post, pm or send a gmail to aelgoa
Have a good one
MarnixIf you have a membership with the apple developer community or know anyone who has and also resides within the united states, please contact.
The purpose is to partake in http://www.atari.com/pongdeveloperchallenge
The initial game design document is fully completed and the ideas expressed in it are more than strong enough to compete for the top prizes.
I'm well versed in different programming languages (c, scheme, js, assembly, python,...) as well as being a proficient sound designer and musician and a skilled graphics and animation manipulator myself. Assistance with the actual development would appreciated but is not really necessary.
Winnings and proceedings arising from participation would distributed most fairly. If you know anyone besides yourself that is able to help out, you would also be rewarded financially from an ensuing victory.
Reply to this post, pm or send a gmail to aelgoa
Have a good one
Marnix -
Hi I am trying to change the margins and layout of an existing in design document, help!
Hi I am trying to change the margins and layout of an existing in design document, help!
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html -
Can any one send me Workflow high level design document.
Hai Krishna
Check the following Links & Example Code
Check the below PDF file on Workflow:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
http://www.sap-press.com/product.cfm?account=&product=H950
I am giving you links for Workflow....
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://www.sapgenie.com/workflow/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following:
1) Goto Tcode PFTC : Standard Task > Create Button>Workflow Templete
For Create Container
Element : ZBUS1001006
Name : ANy Name
Description
Data Type & Properties
Data Type:
select Object Type : BOR Object Type for BUS1001006
Properties:
Parameter Settingd : check all Import, Export & Mandatory Checkboxes
Basic Data :
Abbr : Create_View
Name : Some Name
Work Item Text : Create View Material & -
Click on DELE Button & Select Material From The List
Object Catagory : BOR Object Type
Object Type : BUS1001006
Method : View
Triggering Events
Obj Catagory Object Type Event
BOR Object BUS1001006 View
activate it
Enter on BUS1001006 Object Type you will get Quadratel<> Button after that
double click on Quadratel<> button you get green button
after that the system will generate the task No.
check in the Event linkage Tcode : SWETYPV
if you find an entry with your Workflow and linkage active
goto Tcode : SWEC click on New Entries
Change Doc Obje Obj Cat Obj Type Event on create
Material BOJ Obje BUS1001006 View Option Button(Checked)
save this
goto Tcode : SWEC
Change Doc Object : Material
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Check with On Create Button
Goto SWETYPV
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Receiver Type : Some Work Flow No: WS80000431 like this
Click on Work flow Builder
Thanks & regards
Sreeni -
Need best Architecture design for the following scenario
Hi Experts,
I need best architecture design for the following scenario:
Sender: Mail
Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then send Mail(SOAP adapter executed successfully) and SMS . So receiver is SOAP, Mail and SMS.
My current approach issue:
Three message mapping:
Mapping1: mail to SOAP
Mapping2: mail to Mail
Mapping3: mail to SMS
In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
Note: There is possible to fail the SOAP request in adapter engine.
Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
Thanks for advance!!
Regards, KumarWhat do you mean by successful execution of soap call? Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms. How big call is your soap ? If your soap interface is very simple I can give the other possible way.
Sender sends the message, use mapping to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS). If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
Other option is go for CCBPM. Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block, -
A Leading 3D Architecture Designing Services Provider in India.
Hi all!!! This is on behalf of Yantram – A Leading 3D Architecture Designing Services Provider in India.
I am new to this forum and hope to get good support from all the forum members.
Edited by: user10387861 on Oct 3, 2008 2:26 PMThis forum is for oracle users to share their knowledge . Not to support or give service . For support hire a DBA or connect to metalink.
Regards,
Kumar
[www.idatamax.com] -
Use of field "design documents assigned" in material master
hi,
kindly help me to use the field "design documents assigned" in material master. whenever i creat material master (MM01) in basic data2 view this field comes with grey/black No Link indicator. how to use this and for what .
regards
roshan s.Hi Roshan,
Insted of using this field u can assign Document directly to the Additional Data tab.
TO attach the document to Material Master go to Additional data ---> Document data, assign Document.
You can confirm it by pressing F1 key by selecting that Field.
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 10, 2008 3:26 PM -
Design document and flow chart ofr procedures
for every pdocedure and fumctions we have to maintain design document and flow chart for taht procedure.
i need one sample design document and flow charthttp://www.lmgtfy.com/?q=design+document+flow+chart
-
Good day,
I'm working in Oracle Forms Builder 10g (10.1.2.0.2) and I keep coming across functions in the PL/SQL code that are used to modify values in the forms. Unfortunately I don't have a design document for my system so I can't tell the API of these functions. I think some of the functions may be standard functions in PL/SQL or Oracle Forms Builder. Would anyone be able to point me to a resource that can explain how to use each of these functions?
go_item()
go_block()
find_item()
get_item_property()
set_item_property()
get_block_property()
set_block_property()
get_window_property()
set_window_property()
get_item_instance_property()
set_item_instance_property()
There are several custom functions in the system as well, where should I look to see where they are defined?Hello Thomas,
Those are all Forms functions. I would suggest you download the PDF [url http://www.oracle.com/technetwork/developer-tools/forms/documentation/10g-forms-091309.html]documentation for Oracle Forms. I use the PDF manuals all the time. Another good source is the online-help by simply selecting Help => Online Help and then searching for the particular function name or the like.
Good luck,
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :) -
Print Design Document No. on P.O.
Dear all,
Please suggest me how can i get print of Design Document No. & thier Version no. on P.O. {The design document No. is in MM01 -> Basic Data 2 }
"Note : Is it possible by tick remove of Design document assine in same field. If yes please suggest me how can i remove it."
Thanks
Sameer Kumar PradhanHi,
1. how can i get print of Design Document No.
Go to doucment data tab(via additional data) just double click on the document type,it will take you to the CV03N screen where you select the document & click on print,else double click on the document then take the print out,for the former one config has to be done
2 Is it possible by tick remove of Design document assine in same field. If yes please suggest me how can i remove it."
The tick indicates that you havent linked any document in the material master
If you link any document then that subscreen "Design doc assigned" itself will vanish
For attaching document go to "additional data"
Select Document Data here you can attach any doc/drawing
Hope this is clear
Rgds,
SVP -
Hello all,
I would like to know what the functional design document is about. What is the use of functional design document? Pl. post any link or documents related to it.
Thanks,
MaxxJenni
Design Documentation tell us how the interfaces are going to work for the entire project. So usually Architects or Senior guys who have indepth experience of XI will usually write this.
Functional Documentation tell us the functioanlity of the interface. This is written by the Functional guys who have indepth knowledge about the functionality what they are looking from the interface. They may even take the help of technical guys to some extent.
Technical Documentation tells us how the interface is going to be worked technically. Here we will mention what are the adapters, naming conventions etc we are going to use for the interface. This is written by the XI developers. This are purely my views and this may change from person to person jenni.
For further info go through the urls:
Re: Building XI
XI technical specification documents
Regards,
---Satish -
Web Service Design Document Template
Hi Experts,
Can anyone please send me the good "Web Service Design Document (Tech Spec) Template" please?
Thanks,
Shriram.Hi,
I was also getting same error once...However i was able to see my web service definition in F4. Selecting from F4 list was working fine but if i entered the name mannually, i was getting the same message as you got...may be its a Bug..
Just to assist you, Have to activated the webservice from SICF before going for deployment using template or Adobe ?
Just check if you have maintained the webservice in SICF.
Thanks & Regards,
Suchita -
Hi All,
We all know that design document for rulebase differ from conventional design document of any other development can you please share a sample design document or points that should be taken care while creating design documnet for rule authors.
Thanks
Kunal SharmaI suggest you review the following:
Guide to Designing a Policy Model at: http://www.oracle.com/technetwork/apps-tech/policy-automation/learnmore/opaguidetodesigningapolicymodel-1531936.pdf
and
Oracle Policy Modeling Best Practice Guide at: http://www.oracle.com/technetwork/apps-tech/policy-automation/learnmore/policymodelingbestpracticeguide-1371173.pdf
Maybe you are looking for
-
Looking for app to use for reminder of customers service days
I am a Chimney Sweep and I'm looking for an app i can have on my iPad & iMac that i can set reminders for customers service days, they could be a year ahead but its reminder for me to then tell the customer its time to have your chimney cleaned. Than
-
Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?
Hi, Did some preliminary searching on this before posting but couldn't find with confidence my answer. Does anybody know? Details below. Q: Will upgrading to Snow Leopard affect my Windows 7 boot camp partition? I'm running 10.5.8 on a single drive w
-
I'm on ID CS3 and I can't get any of the swatch libraries to open for me. From the swatch palette I go to load swatches, then in the presets folder, I find swatch libraries, but everything is grayed out in the folder. Can't access them. Also tried lo
-
I already have Adobe photoshop elements 12, it WAS on my desktop, and for some reason it is gone, now I'm trying to re-download it, and I cannot figure out how.
-
I tried to install iOS beta 3 on my iphone 4s but i wasn't able to activate it, so I entered into recovery mode and then restored, what can I do to run iOS 5.1 or at least to have the possibility to switch off 3G network without switching off Network