Architecture differences between Hyperion System 9 and Hyperion System 11

Hi,
Can any one let me know what is the difference in Architecture between Hyperion system 9 and Hyperion System 11?
I need it urgently. If any one has info around this kindly share with me or send some document in this respect to my mail id [email protected]
Kindly send the info.
Regards,
Ramachandran J

Hi Ramachandran,
1. Its impractical to list out the all architecture differences .
2. In short , the over all architecture of the whole suite is more or less similar to 9X(with lot of new features and tools too) , this is in comparision with 7X and system9( which was a complete paradigm shift ,as they got closely integrated in 9) , and in 11X its even more tightly integration and thats why named as fusion.
3. More info about features ...etc , you got to refer docs, no other alternative.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

  • Difference between business service and business system in SLD

    hi all,
    i m very new to XI. can anybody tell me that what is the basic difference between Business Service and Business Systems?
    Is it necessary to use them? and if yes then when to use what?
    Thanx.
    Regards,
    Kunjal......

    Hi Kunjal,
    In SAP XI every system in your landscape with which you are interfacing is defined as Service.
    The service can be your Business service or Business system.
    Generally SAP systems are referred to Business system and you define them in the SLD before you import them.
    The Business service is a logical name referring to any system in your landscape.
    To communicate with any third party application you need to create communication channels which are associated to your service.
    More about this here:
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/content.htm
    Regards
    Vijaya

  • Difference between R/3 and CRM systems

    Hi,
    I want to know difference between R/3 and other systems like CRM, SCM. Shall we need XI to integrate them..
    I think that CRM,SCM are the modules of R/3 is correct..
    What kind of applications they are...
    Thanks,
    RamuV

    Hi Ramu,
    As you said they are R3 Applications only.
    can be connected with the help of XI.
    CRM uses BDOCs but XI can only deal with IDOCs. So when you will be working with BDOCs of CRM, then in CRM you will have to create custom IDOCs for the corresponding BDOCs and then you can have File-IDOC and IDOC-file scenarios working via XI to communicate between your CRM server.
    BestRegards,
    Ramesh

  • Architectural Difference between Oracle 8i and Oracle 9i

    hello there
    anybody can tell me precisely what is the architecture difference in Oracle 8i and Oracle 9i.
    or provide me the link where i can get it.
    waiting for reply

    What do you mean by "architectural differences"? Fundamentally, Oracle architecture hasn't changed a whole lot in a couple of decades. Certain implementations within the overall Oracle architecture will change over time, normally to support some new feature.
    Locally managed tablespaces, for example, automatic segment space management, and automatic extent allocation are pretty important new features, but they don't fundamentally change the architecture of allocating space for objects to store data.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • DIfference between on Workforce and Hyperion Planning

    Hi All,
    Could some one help me with Couple of points on basic difference between a normal Hyperion Planning and WorkForce Planning (Fusion Edition).
    Thanks,
    Venky

    Have a read of :- http://www.oracle.com/appserver/business-intelligence/hyperion-financial-performance-management/docs/hyperion-workforce-planning-datasheet.pdf
    or :- http://www.oracle.com/appserver/business-intelligence/hyperion-financial-performance-management/docs/hyperion-planning-datasheet.pdf
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • What's the difference between data source and source system in BI

    hello
    what's the basic and exact difference in BW 3.0 and BI 7.0. i am very urgent indeed. can anyone help me - how the things should be done here. it's preety confusing.
    Can anybody give me the step by step analysis.
    Thanks in advance
    C.S.Ramesh

    Hi,
    Chk the foll links...
    See this very nice presentation prepared by Dr Berg on new features of BI 7.0 (these are the differences between BI 7.0 and BW 3.5):
    http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
    Check the release notes:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    This presentation:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
    Web Blog:
    /people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
    You can also refer below posts:
    Re: BW 7.0 Release
    /message/1383908#1383908 [original link is broken]
    Upgrade from BW 3.5 to BW 7.0 (BI 7.0)
    Some features of BI 7 are
    1. In Infosets now you can include Infocubes as well.
    2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
    3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
    4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
    5. Search functionality hass improved!! You can search any object. Not like 3.5
    6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
    this is a good PDF on Upgrade from BW 3.5 to BW 7.0
    latest on upgrade tp BI7.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
    You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
    /community [original link is broken]
    Re: BW 7.0 Release
    Re: BW 7.0 Release
    Re: BW 7.0
    take a look presentation
    overview
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
    detail
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
    may useful .....
    https://www.sdn.sap.com/irj/sdn/developerareas/bi
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Hope this helps.

  • Architectural differences between Ep5.0 and Ep6.0

    Hi Expert,
    Is there any document that specifies the differences in the EP5.0 and EP6.0 architecture.
    It seems that the only difference is just the switch framework containing the extension set and Industry Solution extension...it looks very strange!
    Have you any idea about other differencies?
    Many thanks in advance
    Fabio

    Hi Fabio,
    The difference between EP5 & EP6 is that there is no PDK beneath  EP. The "PDK" for EP6 is a business package (a role with some content) to import into EP6. From there, you can upload components (PAR files), delete them etc., and you have the doc's that you know from PDK 5.0.
    There is also a different Eclipse plugin.
    Portal components for EP5 and EP6 differ in many points, for example there is a xml deployment descriptor in EP6 where in EP5 you had the profile property files.
    Also some APIs have changed.
    But you can import EP5 par files into Eclipse with the EP6 plugin.
    Regards,
    Pooja.

  • Is there any architectural difference between CSC-SSM and AIP-SSM modules

    Hello security gurus!
    I'm wondering if there's any chance to make Content security module (CSC-SSM) work as IPS (AIP-SSM). It seems to me they are absolutely identical in terms of hardware. Is there any chance to make CSC-SSM boot with the flash from AIP-SSM and have the ASA recognize it as an IPS module ?
    Eugene

    Zheka,
    This is not recommended and you will loose support, these are different devices designed for different purposes, you will also have issues with the license, I have seen it one once, and the customer did it by mistake, the module eventually crashed and we had to add the proper image.
    Regards,
    Felipe.

  • Diff between Business service and Business System?

    HI Experts,
      Pls let me know wht is the difference between business service and business system??
    when we will have to go for business service and when for business system??
    thnx in advance..
    New XI

    Hi,
    Difference between Business Service and Business System are :
    1) Business sytem require all details like login user id
    password require to create but in case of business service
    log in details does not require..
    2) A Business System  is purely for SAP-Systems and
    Business Service for Non-SAP systems
    3) Business service refers to any business applications where
    as the business system is defined in SLD(System Landscape
    Directory)
    4) When we have full details of application system the we are
    going to use the business system and it is created in the
    SLD so we dont have authorization to change the business
    system name.
    When we have partial details or no details of Technical
    system then we r going to use the business service. it is
    created in the ID. we can see and change it.
    5) A Business system is something that physically exists
    For example, if u want to download a file from a system
    ABC, by using file adapter and then want to update the
    content of this file into r/3 database by using RFc,then
    the system  abc and the r/3 will be ur business systems
    i.e. they physically exists. Business Systems are
    configured in SLD.
    Business service is mostly usedin B2B Scenario (cross-
    component),where you don't know the Business System of your
    partner. In other words business Service will be used only
    for those partners which do not have a physical landscape
    set up . Business servces do not have an entry in SLD.
    6) A Business Service is an Abstract Unit(which is not in
    System Landscape Directory) addressing Senders and
    Receivers of Messages.
    Physicals systems which use their communication channels
    and routing rules to communicate with other systems are
    called as Application Systems OR physical systems.
    7) In simple when u going for A2A integration then we define
    our Technical systems are Business system. If we r going
    for B2B integration then we dont know the complete
    information about the other end Business Landscape so, we
    configure it as a Business Services. Business system are
    created at SLD. Where as a Business Services are created at
    Integration Directory.
    8) Business systems:
      These are logical senders or receivers that exchange
    messages by using the Integration Server and that are
    entered in the System Landscape Directory.
    The business systems in the System Landscape Directory
    relate to a system landscape. The business systems of
    business partners are therefore not entered in the System
    Landscape Directory. To be able to address such business
    partners logically, use communication components in the
    Integration Directory. A business system is a way of
    specifying a communication component in the Integration
    Directory more precisely (business system component).
    Hope this will hwlp u..
    Regds,
    Pinangshuk.

  • Architecture difference between Hyperion 7.x, 9.x and 11.x

    Hi Guys,
    Can any one tell me what is the architecture difference between Hyperion 7.x, 9.x and 11.x
    Regards
    Avinash BI

    Here are the links I have:
    11.1.2.1
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-architecture-11121-354678.ppt
    11.1.1.3
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-fd-11113-128366.ppt

  • Could not find  a Hyperion Reporting and analysis -system 9

    Dear Experts ,
    i have installed Essbase and planning
    i have configured work space
    http://localhost:19000/worspace
    when i am trying to log in to work space the following error is showing
    Could not find a Hyperion Reporting and analysis -system 9 server running on Hyperion at port 6800.please verify your server connect string confirm that the server is up
    i have started all Hyperion services
    could you please help me in this regard,
    thanks in advance
    Kishore

    Have you installed Reporting and Analysis Services?
    If you have already installed then start the Reporting and Analysis Services..
    Hope this helps..
    Regards,
    Manmohan Sharma

  • Difference between workflow engine and quality assurance system

    Hi,
    please let me know the difference between workflow engine and quality assurance system.

    Hi,
         please let me know the difference between workflow engine and quality assurance system in TMS.

  • Time difference between the Identity system and Access System: OAM

    I was installing OAM. Performed the below steps.
    -installed identity server
    -installed webpass
    -setup of identity system console
    -installed policy manager
    -setup of access system console
    The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
    Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
    The Identity Server, WebPass and Policy Manager are installed on the same machine.
    Userdata repository: OVD 10.1.4.3
    Policy and Config Data Repository: OID 11.1.1.3
    OAM: 10.1.4.3
    Windows2008 - 64bit
    Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
    Any idea on this error. Please Advise.
    Thanks in advance.

    Try this::
    Check Time Difference Between Identity and Access Manager Systems
    Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
    If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
    Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
    For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
    Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

  • What is major difference between hyperion planning and hyperion essbase

    hi
    what is the differences between hyperion planning and hyperion essbase.i dont know about planning much.but as far i know.i think we can do every thing in essbase also(planning,budgeting and forecasting)
    what u say.what we actually do in planning.
    regards
    bharat

    Hi Bharat
    Although as you mention in your post Essbase can do plans/budgets etc it may not be simple to provide complex planning process control and ease of data entry etc.
    Planning delivers these benefits and some through web delivered components such as forms, business rules and workflow for instance. There are some restrictions to using planning and these need tobe well understood before embarking on a project.
    It would be worth having a look at product sheets from Oracle and/or presentations from various events to get a feel for planning capabilities.
    Hope this helps.
    Andy King
    http://www.analitica.co.uk

  • Difference between client system and logical system

    Hi all
    Can any one explain about the client system and logical system??
    When this message type will comes in to picture at the time idoc processing??
    Thanks and Regards
    Arun Joseph

    hi Arun,
    I am giving the complete info on idoc.pls chk once.then ur issue will be solved.ok
    and to know the diffrence between client and logical system very keenly go thru this link
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abouttheclientsystemandlogicalsystem&adv=false&sortby=cm_rnd_rankvalue
    IDOC Administration
    Step 1: Tcode: WE 46
    Setting the Global Parameter for IDOC Interface
    Step 2: Maintaing a Logical System
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Logical Systems, Define Logical systems
    Go to Spro transaction
    Step 3: Allocating Logical systems to the Client
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Logical Systems, Assign Client to Logical systems
    Go to Spro transaction
    Step 4: Setting up an RFC destination
    Tcode: SM 59
    Path: From the ALE Customizing in IMG, choose Communication, Define RFC
    Destination
    You can also do the Advanced Settings in the RFC Destination
    Step 5: The PORT definition
    TCode: WE 21
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Systems in Network, Asynchronous Processing, Assign Ports, Define Port
    Step 6: Generating Partner Profiles
    TCode: BD 82
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, PArtner Profiles and Time of Processing, Generate Partner Profiles
    Step 7: Distributing the Model
    TCode: BD 64
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, Maintain Distribution Model and Distribute Views
    Technques for Distributing the Master Data:
    Technique 1: The Push Approach
    Executing the Process:
    TCode: BD 10
    Path: from the ALE Main Menu, choose Material Data Distribution, Cross
    Application, Material, Send
    Technique 2: The Change Pointer Technique
    Enable Change Pointers Globally
    TCode: BD 61
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution, Replication of Modified Data, Activate
    Change Pointers
    Enable Change Pointers Globally
    TCode: BD 50
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution, Replication of Modified Data, Activate
    Change Pointers for Message Type
    Specify the Fields for which Change Pointers are to be written
    TCode: BD 52
    Path: From the ALE main Menu, Choose ALE Development, IDOCs, Change , Define
    Change-Relevant Fields
    How the Classification system works:
    Creating a Class Type
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Status for the Class Types:
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Classification Status:
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Classes:
    TCode: CL 01 (it is zero)
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Classes
    Allocating classes to the Logical Syatems
    TCode: BD 68
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Assign classes
    to Logical systems
    Filering at the IDOC level:
    Identify the Filter Object:
    TCode: BD 59
    Path: From the ALE main Menu, Choose ALE Development, IDOCs,Data Filtering, Assign Filter Objects
    Type to IDOC Field
    Modify the Distribution model
    How Segment Filtering Works:
    Configuration:
    Configring the segment-filtering technique is a one-step process.Just specify the segments to be filtered
    TCode: BD 56
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Scope of the Data for Distribution, Filter IDOC Segments
    The Reduced IDOC Type:
    The reduced IDOC type allows to get down to the field level and specify the fields a recieving system does not need.
    The System still needs the fields, but this has no effect on the recieving system because each field has a null value,
    represented by a forward slash(/) in the field.
    TCode: BD 53
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Scope of the Data for Distribution, Message Reduction,
    Create Reduced Message Type
    IDOC:
    Complete Documentaion on any IDOC using TCode: WE 60
    IDOC Display Tool: TCode: WE 02 or WE 05
    IDOC DEfinition components:
    Segment Components:
    1. Segment Type (E1, Z1)
    2. Segment Definition(E2, Z2)
    3. Segment Documentation(E3, Z3)
    E- SAP Defined
    z- Custom Defined
    IDOC runtime componets:
    control Record:
    Data Record:
    Staus Record:
    First Create the Segments using TCode: WE 31
    and then create the IDOC using TCode: We3 30
    first release the segments and then IDOC.
    Creating a new Basic IDOC Type:
    STEP 1: Analyze the Data:
    STEP 2: Create Data Elements:
    STEP 3: Create Segments:
    STEP 4: Create Basic IDOC Type:
    1. Execute TCode: WE 30
    2. Select the Create new option and enter a description for your basic IDOC type
    3. click the IDOC name, and click the create icon.
    Enter the segment type and its attributes.
    4. Keep on adding the segments as in step 3.
    5. Save the basic IDOC type
    Step 5: Release the Segment Type and Basic IDOC Type
    STEP 6: Transport the Segments and Basic IDOC Type
    Extending a Basic IDOC type:
    STEP 1: Analyze the Data:
    STEP 2: Create Custom Segments:
    STEP 3: Create the IDOC Type:
    STEP 4: Release the custom Segment and IDOC Extension
    Develop the function module for fteching the Data and then inserting the data into IDOC using
    EDIDD(for control Record) and EDIDC table(for DATA Record)
    Configuring the Systen for IDOCs
    Configure an Outboubd Process that uses Message Control
    Step 1: Create a new Message Type
    TCode: We 81
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 2: link the IDOC type to the Message Type
    TCode: We 82
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 3: Create a new Process Code
    TCode: We 41
    Path: From the Area menu of EDI, choose Control,Outbound Process COde
    Step 4: Create or Change a Partner Profile
    TCode: We 41
    Path: From the Area menu of EDI, choose IDOC,Partner Profile
    Configure an Outboubd Process for Stand-Alone Programs
    1. Create a new message type
    2. Link the IDOC type to the Message Type
    3. Add the message to the ALE Distribution Model(use BD 64)
    4. Create or change the Partner Profile
    go through the following site to have screen shots.
    http://www.****************/Tutorials/ALE/ALEMainPage.htm
    thanks
    karthik
    reward me points if usefull

  • Difference betweeen     Technical systems and Business systems

    Hi
    In a SLD we need to configure  technical systems and Business systems.. what is the exact difference between  Technical Systems and Business Systems..
    this question is asked an interview.. for this.. how can we explain..
    thanks
    babu

    Hi babu
    First I let u know with analogy and actual definition as below
    Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an  application server like ABAP AS or Java AS which is basically a technical system.
    Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
    Standalone Java systems
    Third-party systems
    Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
    The business systems in the System Landscape Directory relate to a system landscape.
    The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
    Reward point if it help u understand

Maybe you are looking for