Architecture Limitations with Replication of VM connected with Physical Mode RDM

what are Architecture Limitations with Replication of VM connected with Physical Mode RDM in vsphere replication. Why VMware is not supporting this?

vSphere Replication does not work with physical mode RDMs. This is because of the way that vSphere Replication and physical mode RDMs work.
As outlined in this: VMware KB: Difference between Physical compatibility RDMs and Virtual compatibility RDMs
It isn't currently possible for VR to do what it needs to do with physical mode RDMs.
Does this answer your question?

Similar Messages

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Sole proprietor flag - limitation with BBPGETVD

Hi all,
We are on SRM 7.
For vendor replication,the reports arestill the same i.e. BBPGETVD and BBPUPDVD in both SRM 5 and SRm 7.
However in SRM 5,there was a limitation with BBPGETVD that it does not replicate a vendor marked as a sole proprietor in R/3 down to SRM...Can someone confirm if that limitation still exists in SRM 7 also?
Also does anyone know why SAP does not replicate a vendor marked as a sole proprietor in R/3 down to SRM? I did find athread on this same issue but no solution has been updated in the post
Re: SRM6: BBPGETVD Does not Replicate Sole Proprietors
Is there a way BBPGETVD can be useed to replicate vendors from ECC which have this flag "sole proprietor " checked/marked?
Please advise.

Replicate Natural Person from ECC to SRM?
However, there is a pilot note available (1281547) to change this behaviour, since it is the standard one.
In order to be included in such note, an SAP message should be opened.

I have the original iPad 5.1.1. I am looking for an app to send message by voice . It's for a family member with physical limitations .. So if anyone has a recommendation please let me know thanks

I Have the original iPad 5.1.1
iam looking for an app that can use voice to send text/messages its for a family member with physical limitations

I have the free version of this app that limits you to a 5MB file, but it does work. It requires iOS 3.1. I'm not sure how well the paid version works or what the limitations are.
https://itunes.apple.com/us/app/quickvoice2text-email-pro/id285877935?mt=8

Tolerance Limits with Date and quantity

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

Go to SPRO - Material Managemetn - LIV - Invoice Block - Set Tolerence limit.
USe company code and maintain a value for ST
ST: Date variance (value x days)
The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.

HT4623 I attempted to update my phone without realizing that I needed to sync the phone with my laptop. I am not home and my laptop is in another state. My phone is stuck in the "connect to iTunes" mode and I now cannot use the phone. Can this be undone

I attempted to update my iPhone 4 without realizing that I need to sync it with my laptop. My iPhone 4 is now stuck in the connect to iTunes mode and now I cannot use it. Is there a way to reverse this so I can use my phone because I do not have my computer with me?

Maybe it was hacked before and now through the update it's locked back to the original carrier.

Set up Tolerance Limits with Date and quantity for GR

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

hi,
You can do one thing...
Activate the SLED check...
BY this when the date goes earlier or late from the expected date, then system show you the messages like:
1. Earliest delivery date is DD.MM.YY..
2. Expected delivery date was DD.MM.YY...
In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
Via SPRO settings...
SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
Regards
Priyanka.P

Suggested list size is limited with 10 elements using autoSuggestBehavior

Hi,
I am using the autoSuggestBehavior with inputListOfValuesComponent. suggestedItems come from a ViewObject. When I type a any letter the suggested items list is always is limited with 10 items(event the suggested list is longer) and user must go to another page to see the rest. Is there a way to increase the suggested list size?
Thanks in advance..

With the latest release of Jdeveloper we have a new component with auto suggest, so you dont need to implement any kinda of listeners or javascrips.I have used it as below ;
<af:inputListOfValues id="gittigiYerTitleId" searchDesc="Ara"
popupTitle="Search and Select: #{bindings.ViewMisdt626_1.hints.GittigiYerTitle.label}"
value="#{row.bindings.GittigiYerTitle.inputValue}"
model="#{bindings.GittigiYerTitle.listOfValuesModel}"
required="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.mandatory}"
columns="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.displayWidth}"
shortDesc="#{bindings.ViewMisdt626_1.hints.GittigiYerTitle.tooltip}"
partialTriggers="selectGidisTuru"
binding="#{backingBeanScope.backing_app_yeniEvrak.gittigiYerTitleId}">
<f:validator binding="#{row.bindings.GittigiYerTitle.validator}"/>
<af:autoSuggestBehavior suggestedItems="#{bindings.GittigiYerTitle.suggestedItems}"/>
</af:inputListOfValues>
Where the suggestedItems list comes from a view object. My problem here is when I type any criteria it offers me only the first 10 items for the rest I must go to the search page offered again by the component. This ussage is not being so friendly for the users. I thought that there must a setting for the size of the offered items list.

Error in Remote Connect Oracle with MTS Mode

I've configed my database to run MTS.
My db is 8.1.5 with x86 Unix SunOS 5.7
If I connect db through local area network, I can connect it with MTS mode.
But if I try to connect db from a remote site, I can't connect and the following error shown :
ERROR:
ORA-12545: Connect failed because target host or object does not exist
By adding a clause (SERVER = DEDICATED) in my remote client's tnsnames.ora
I can connect it.
Rgds,
Edward
The following is my configuration.
init.ora :
mts_dispatchers = "(PROTOCOL=TCP)(DISP=3)"
mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
mts_servers = 1
mts_max_servers = 40
mts_max_dispatchers = 4
listener.ora :
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/8.1.5)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = QQQQdb.net)
(ORACLE_HOME = /u01/app/oracle/product/8.1.5)
(SID_NAME = QQQQdb)
tnsnames.ora :
QQQQDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = QQQQdb.net)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
null

I have run into the same problem using oracle 8.1.6.1 with redhat 6.2..
I have found out that only when I specify host ip in the mts_dispatchers the mts will work correctly..(specifying host domain name is no use)
Here is a sample of the configuration, hope that helps..
mts_dispatchers = "(address=(protocol=tcp)(host=192.168.0.1))(dispatchers=4)"

Can't connect to ftp servers with Passive Mode

Hello,
I can't connect to ftp servers with Passive Mode.
I have Linksys WRT54GL.
Msg i have:
[R] 200 PORT Command successful.
[R] LIST -al
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 426 Data connection closed, transfer aborted.
[R] List Error
and:
[R] 200 Type set to A.
[R] MODE Z
[R] 200 MODE Z ok.
[R] PASV
[R] 227 Entering Passive Mode (*,*,114,11,8,147)
[R] Opening data connection IP: *.*.114.11 PORT: 2195
[R] Data Socket Error: Connection timed out
[R] List Error
Thanks for the help !

Maybe you need to do Port Forwarding on your router...Check for the Port Numbers for your FTP Server...

Limitation with Eloqua Bulk API

Hi,
We are planning to develop a connector for data extraction from Eloqua to load into Birst and would like to understand any limitation with Bulk API.
Thanks,
Anil

Hi Anil,
The below listed limitations are present in the Bulk API Guide:
4.12 Bulk API Limits
4.12.1 General Limits
Number of syncs permitted per 24hr period: 2000 This limit is not currently enforced, but is logged and monitored.
4.12.2 Import and Export Limits
Maximum import size: 32MB. The import will fail if the data source is larger than 32MB. To import a data source larger than 32MB, you can perform multiple POST requests. For extremely large data sources, the import should be synced periodically, i.e. once 250 MB of data has been POSTed.
Maximum export size: 50,000 records per page. The export will fail if you attempt to export more than 50,000 records in a single page at one time. If you need to export more than 50,000 records at a time, you can filter your request by date range and make separate requests for different date ranges.
Maximum fields that can be included in one export: 100 fields. The export will fail if you include more than 100 fields in the export definition.
Maximum sync size: 5,000,000 records. The sync will fail if you attempt to sync more than 5 million records
If planning for specific large exports, you can create filter statements in your export definition.
-Syed.

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.

Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.

My Iphone goes into "connect to Itunes" mode, I connect to Itunes and restore, then with 24 hours I get the same message again, any ideas ?

My phone goes into "connect to Itunes" mode and locks up, I connect to Itunes and do a restore and then within 24 hours I get the same message again and the phone locks up. any ideas ?

You're welcome.
A hardware problem doesn't mean complete failure.
With a computer, a hard drive can have a partial or complete failure.
If it wasn't a hardware problem, it would be resolved after restoring the iPhone as a new iPhone or not from the backup. If not, every iPhone running 5.1.1 would have the same problem.

So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Issue with Airplane Mode on legitimately unlocked iPhone

Hi,
I bought an iPhone in Australia from a distributor for one of the large carriers. I bought the white 16Gb outright and paid the fee to have the phone unlocked (as is permitted in Australia). It all worked well with both an Aus and a UK SIM card I had.
The white plastic back then cracked so I took it to an Apple store where they replaced it. I told the Genius that I'd had it unlocked and he said no problems, etc, etc.
He replaced the phone and I took it home, all seemed to work well. Again, with both SIMs.
I installed the 2.2 firmware upgrade.
Now to the troublesome bit.
Sitting in Melbourne airport, about to leave Australia for some significant time, I swapped the SIMs over and the phone started complaining about needing to be connected to iTunes.
I did this and it unlocked (again).
Question 1: Do I really have to connect to iTunes every time I change the SIM?
I replaced the SIM with my Aus one and turned the phone off to fly to Kuala Lumpur. On arrival in KL I swapped SIMs again, went through the hassle of connecting to iTunes to unlock.
Then, as I wanted to use the phone on my net flight to watch movies and play Fuzzle, I turned on Airplane Mode with the UK SIM.
The phone instantly complains about the SIM being changed and asks to be connected to iTunes. I did this (getting annoyed at this point)! This time, iTunes reports that the phone is fauly and I should take to an Apple Store
I then replaced the SIM with my Aus one, and it all started working nicely again including allowing me to use Airporne Mode.
Question 2: Why can't I use Airplane Mode when my UK SIM is installed?
This seems like a bug to me, rather than some complication with Airplane mode. Surely if my phone has been unlocked and I can make calls with both SIMs, then I can use Airplane Mode regardless of which SIM I'm using?
Added complication here is that I'm not going back to Australia for a while (maybe years), so unless Apple are nice to me and decide that the phone is faulty and will replace it in the UK, I'm going to be left with an expensive, and white, iPod Touch.
Cheers for any suggestions,
Ian

I don't think the problem lies specifically with the SIM card, but with the software on the phone.
I would appreciate others trying to replicate my problem with their iPhones. Simple steps (requireing an unlocked iPhone) are...
1. Insert original SIM card (all should be fine)
2. Remove orginal SIM card and replace with second carrier SIM
3. Sync with iTunes to get the phone working again.
4. Either turn on Airplane Mode or turn the phone off and on again.
5. The phone (at least mine) will require you to connect to iTunes again.
Turning on Airplane Mode or turning the phone off and on with the original SIM card inserted doesn't lead to this behaviour.
Ian

Architecture Limitations with Replication of VM connected with Physical Mode RDM

Similar Messages

Maybe you are looking for