Architecture: obtain information about the loading of my infocube ?

Hi,
I want to make a Java application which loads information about my infocube like last successull loading, number error records for the last loading, the possibility to display these error records from the PSA ...
is it possible with WD ?
Any idea How retrieve these information from BI ?
I imagine an application which perform on PC Frond End users which informs the state of BI. And if there is a problem, i want to inform the cause by sending a text message from my PC to all PC Fond End users (where my java application is running).
Thanks
Rodolphe.

You can enter the Serial Number and Repair ID on this page to get a stsus update:
https://selfsolve.apple.com/repairstatus/main.do;jsessionid=0phLTksW2mwLbyQVF3Qs zFtCQMH2Jv5xkMxvMlD6RsKVLhpJjpjj!846893301
Hope that helps!

Similar Messages

How can I obtain information about the recently finished commands?

How can I get information about the recently finished jobs / bash commands? (eg. date / time of termination)

$ e echo foo
foo
$ type e
e is a function
e ()
$@ && echo $@ - $(date) >> test.txt
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
$ e echo bar
bar
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
echo bar - Wed Jan 1 12:11:09 CET 2014
$ e htop
<here I do something with htop for a little while>
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
echo bar - Wed Jan 1 12:11:09 CET 2014
htop - Wed Jan 1 12:15:14 CET 2014
Last edited by karol (2014-01-01 11:20:36)

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

HT1222 This article contains absolutely NO information about the update being offered.

This article contains absolutely NO information about the update being offered. It doesn't even tell me what it might break on my system (i.e. what gets changed). Just excuses of "We Aren't Telling Until Our Investigation Is All Done."
That's not a good enough reason to install an update, it never was, and it never will be.
"Do it because we say so" might fly overseas in Foxconn factories, but around here we don't like being kept in the dark and fed a load of fertilizer.

The individual update pages, such as this one, list the changes and fixes. The reference to information which Apple doesn't release is about security bugs it's identified but not patched, as it would only be useful to attackers.
(64503)

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Do you have any more information about the Lightroom Mobile for tablet? [was:Information]

Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet? Like when it is coming out, what features will it have? Because I can't Waite. Especially for editing a raw file on a tablet. Excited.
I do have a Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files on the app like how photo shop touch does. Example. When your import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer?
3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
4. Will the app display catalog, book, etc modes like Lightroom 5 has?

At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
Adobe will reveal more when they're good and ready.

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

Make information about the current user available in a managed bean

I've overridden prepareSession in an Application Module (AM) so that when a user logs into my application, it immediately uses the username as a bind variable to execute the query for a View Object (VO) that gets more information about the user, like full name, e-mail address ... This works fine and I'm able to bind the VO to a page and display the information.
But now I'm beginning to realize that I'm going to need this information about the user throughout the application. Do I have to include an iterator for the user info VO and associated attributeValues on every single pageDef, or is it possible to write a single managed bean that will expose the attributes of the single row of the VO as properties. The application I'm working on now is a "minor" upgrade of a JDeveloper 10.1.3 application, so I need a 10.1.3 solution, but I have a 11.1.2 application in the works that will probably do the same thing.
Oh, and sorry if this is an FAQ - I'm probably not using good search terms to find solutions that have already been posted.

Thank you Nick -
Your code didn't give me exactly the answer I needed, but it pointed me in the right direction. For one thing, I had a version of ADFUtils that didn't have the getApplicationModuleForDataControl method. However I was able to do a Google search and find working code for the missing method. And since the values I need to expose in the managed bean are from the VO, not the AM, I had to go one step further and get a reference to the VO from the AM, and then a reference to the first (and only) row of the VO.
For anyone else with this question, here's my version of the code:
public class UserInfo implements Serializable {
    private String eMail;
    private String stateCode;
    private String fullName;
    public UserInfo() {
        AppModuleImpl appModule =
            (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
        ContactInfoViewImpl contactInfoVO =
            (ContactInfoViewImpl)appModule.getContactInfoView1();
        contactInfoVO.reset();
        ContactInfoViewRow contactInfo =
            (ContactInfoViewRow)contactInfoVO.first();
        stateCode = contactInfo.getConStCode();
        System.out.println("At construct UserInfo stateCode=" + stateCode);
        eMail = contactInfo.getConInternetAddr();
        System.out.println("At construct UserInfo eMail=" + eMail);
        fullName =
                contactInfo.getConFname() + " " + (contactInfo.getConMi() != null ?
                                                   contactInfo.getConMi() +
                                                   " " : "") +
                contactInfo.getConLname();
        System.out.println("At construct UserInfo fullName=" + fullName);
    public String getStateCode() {
        return stateCode;
    public String getEMail() {
        return eMail;
    public String getFullName() {
        return fullName;
}

N unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have?

Gettting information about the processInstance from BPMObject

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

Architecture: obtain information about the loading of my infocube ?

Similar Messages

Maybe you are looking for