Archive all fails every time

I am trying to use Archive All function of imovie 09 to archive my HDR-SR12 Sony camcorder. It fails with the message:
This file could not be copied:
/Volumes/NO NAME/AVCHD/BDMV/.DS_Store
(-48)
Help.....

There should be better messages in your logs. Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the failed backup, then copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).

Similar Messages

Archive feature fails every time

I created a Smart Mailbox into which I put all older emails. It's got about 5000 entries. So I make an archive of the Smart Mailbox and put the archive file into my Home folder. So I go to open the archive file using File>Import and it creates an Import mailbox, but this mailbox has only 650 entries. I don't know whether it's failing to archive all the entries or if it saves all the entries and only recovers those 650. I've done this many times and always get the same result. Looks like a bug, but does anyone have any ideas? Thanx.

There should be better messages in your logs. Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the failed backup, then copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).

I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

HT1386 I can't complete any music downloads on my phone, I'm gettin a fail every time whether its purchased or pre owned, tried restoring, reinstalling etc etc any ideas

Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails

Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails

IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me

iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?

Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling

I am trying to export the PDF file and conversion fails every time.

I am trying to export the PDF file and conversion fails every time. File is too large of too complex. What do I do? One file is about 55 mb and the other is 58 mb.

Try extracting part of the file and see if the extracted part can be Exported. If so, repeat with the next set of pages. When done, try to load all into the first file.

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Update to 10.5.1.A.0.283 fails every time

Update to 10.5.1.A.0.283 fails every time
It is Xperia Tablet Z SGP321, no branding, no SIM lock.
In the past only Sony original firmware were flashed.
Currently 10.4.1.B.0.101 is inside.
Update to 10.5.1.A.0.283 using PCC fails on every attempt.
PCC was updated to latest available version.
The whole progress looks like following
- first PCC carries out the preparation stage
- than PCC reports to carry out download
- as soon as progress bar at approx. 50% of whole scale the preparation stage
is entered again
- it takes very long time, between 5 and 10 minutes, till the progress bar reaches
nearly 100%
- download procedure ends with following message
error code 10, a hint to check firewall settings if PCC and Sony Update Engine
are passed through, a hint to retry later
- switch off firewall
- switch off antivirus
- disable all protection mechanism in Windows EMEA
- uninstall PCC, reboot, install PCC of current version again
All the above measures do not help.
One week ago the Sony Support claimed I should retry some time later.
How long do I have to wait for retry? a week, a month, a year, 10 years, 20 years?
It is a big effort to get this device close to the windows desktop device
with PCC installed and running on it, to get connected this device with such windows desktop device,
to invoke PCC and the update procedure. All this effort just to see in the end the update
does still no succeed!!!!
How long do I have to live with Xperia and obsolete Android on it?

The point of trying a different computer is that it gives information.
If it works you know that your PC is the problem.
If not, you have to look further.
And finally - if nothing works - you can try to flash it.
My Sony z is working like reborn after a clean install.
It takes some time to learn, but after that it isn't that difficult.
My tablet works like before KitKat (sd-card) , but with the new functions.
No serious bugs whatsoever anymore.!

Bought some stuff on the app store - now it asks to validate payment option but fails every time!?

I bought a couple things on the App store which came to £5.98.
Now every time I try to download or update any apps it asks to validate my payment option but fails every time but the money has been taken from my bank - I've scheduled Apple support to call me tomorrow night but if anyone nows a way around this at all I'd appreciate it.

Take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Similarly contact them regarding the overcharge.
Regards.

Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Export Using Compressor from FCP fails every time

When I try to use the File>Export>Using Compressor command in FC Studio 2, everything seems normal until I submit the batch. But the job fails every time.
I get the following message: "Processing service request error: Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server".
I've gone through all the discussion stuff on how Compressor needs to be reinstalled and all that. That's not my problem here. Compressor will work fine if I use it standing alone. It's only if I try to use the FCP export that this problem occurs.

Compressor works fine as a stand alone when I import a Quicktime file. However, if I try to export a suquence directly from FCP, it gives me a message "File Error: A file of this name already exists". If I press okay it exports it to Compressor which gives me a message, "Can't preview movie Final Cup Pro App is busy".
Then when I go ahead and load the output settings into compressor ( actual compressor window shows the sequence as being loaded) it starts to render and then it stops with the following message logged
"Name: MPEG-2 6.2Mbps 2-pass
Time Elapsed: 0:00:00
Time Remaining: 0:00:00
Percent Complete: 100
Status: Failed - Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server"
Any ideas what the problem might be?
I am using a Mac Pro 8 core with 9gigs of ram and running tiger 10.4.10 and this is FCP Studio 2

Time Machine Backup fails every time "Backup could not be completed"

I want to do a new Time Machine Backup on my iMac2007 Snow Leopard 10.6.8 fails every time with message "Backup could not be completed."
Console says "Error 11" Some Files allways can not be copied/saved by Time Machine, i search an exclude them in TM not to save them, try again, new ones po up every time.
Does anyone know a solution?

One thing which may help.
I had similar issues....a few times.
Have done all the renaming (<8 characters) etc etc as detailed in these forums.
The first time, I erased TC HD and started again. This fixed things for a few days, and then the same issue came back again.
The next time, I simply copied the sparsebundle file (so I had two sparsebundles, one called xxxxxxxx.sparsebundle, and the other called xxxxxxxx copy.sparsebundle (luckily I had room on the HD to do this)). Then I deleted the original sparsebundle, and before I could rename the copy back to the original filename, the image mounted and started backing up....to the sparsebundle with " copy" still in its name.......so I left it be.
A week or so went by, and then I got the same "unable to mount" error message.
Rather than going thru the whole process again, I simply took the " copy" out of the sparesbundle filename, and all was well again.
I continue to get "unable to mount" error messages occasionally, so I simply rename the sparsebundle file (either by adding or removing " copy"), and it seems to resolve the problem, at least for a while.
While not a fix, it seems to be a workaround for me until Apple works out what the issue is, and fixes it.
Hope this helps someone.
P.S. One word of caution. I just had the thought, while writing this, that I have not actually gone into Time Machine to check that previous backups (eg, one hour ago, one week ago, original backup) are there and are able to be accessed, should the need arise. Because the back-ups appeared to be working, I assumed, and assume, they were. Won't be able to check this for a few days as I am on the road.

Updating Adobe Community Help files fails every time after starting

Hello,
I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
Any hints there would be appreciated.
Thanks!

Thanks, Mister Kapoor,
that solved my problem!
All the best to you, sincerely,
Olaf Mueller
Mit freundlichen Grüssen,
Olaf Müller
COMPLOT AG Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13
Tel. ++41 31.313 30 33
Fax ++41 31.313 30 39
[email protected]
http://www.complot.ch
THE ULTIMATE PARTNERS
- RITTER KREATIV
Unternehmensberatung+Kommunikation,
integrales Marketing, Werbung, Promotion, PR
- Complot AG Multimedia Project
Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
- FOTarena
Studio-Pool für Foto, Video, Bildbearbeitung
Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
Re: Updating Adobe Community Help files fails every time after starting
created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
Hope that Helps!.
Arpit
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Backups Fail Every Time

So I am wanting to back up my MacBook to time capsule. I have time capsule all configured and the drive shows up just fine to all of the computers on my network. When I go into time machine preferences, the disc shows up so I add it. Last night I plugged my computer in over ethernet first before doing the first backup. I went to bed and woke up the next morning with an error saying "Unable to complete backup. An error occurred while writing to the directory" or something similar to that. The disk image (sparsebundle) was still mounted on my desktop and I am unable to unmount it without restarting. I restarted and tried again and it said it was unable to mount the image. I then deleted the image to start over and also excluded lots of stuff just to see if i can get anything backed up. It creates the image and starts copying stuff over and gives me the same error I got the first time.
What is causing it to fail each time?
Thanks!

Mine is doing the same thing - it backs up about 50% of the way through, then fails with the same message. It was working for a while, now it's stuck and fails every time, and I haven't found a way to get backups to work again. Prior to this, it had occasional errors while trying to access data, but this is a new behavior. The Time Capsule has been a miserable experience so far...
I've pretty much given up on assuming my data is actually safely backed up with this product.

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Archive all fails every time

Similar Messages

Maybe you are looking for