Archive and Install - Now missing serial number

I have a legit version of Logic Pro through a school -- I was recently teaching a class on it -- but with my recent archive and install its asking for the serial number again and I do not have it available. Shouldn't all this be available in the previous systems folder? If so, how do I go about fixing this? Thanks for your help.

Apparently, you did an archive and install moving backward from Sno to Leo. In this regard, you would have been precluded from preserving user and network settings. [This read may help you with your problem|http://support.apple.com/kb/HT2196]. I have never had the need to try the things mentioned in the read.

Similar Messages

  • I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

    I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

    yes,
    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Performed Archive and Install now Previous System User File is Empty

    Performed Archive and install yesterday -selected the save users and networks option. When it was complete - the machine worked - but when I went into the previous system folders the user folder is empty. I have almost no space left on my drive - so i think my stuff is still out there somewhere - is it?
    Help!
    I do have backups of most things - but there is no room on my hard drive to restore from my backup.

    How much space DO you have?
    If you can boot from another fdrive for now, that;d be good.
    How much free space is on the HD, where has all the space gone?
    OmniDiskSweeper is now free, and likely the best/easiest...
    http://www.omnigroup.com/applications/omnidisksweeper/
    Perhaps they are there but invisible!?
    If you want to try to recover them, you should quit using the computer asap. Possibility exists of losing everything. Backup if at all possible.
    Unfortunately DU can't fix all that much, your best bet is DiskWarrior, you need the CD though.
    http://www.alsoft.com/DiskWarrior/
    If DW can't fix it, you might try Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.

  • I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    When you installed the Lightroom 5 on your MacBook, did it ask for both serial numbers. Since you purchased Lightroom 5 as an upgrade, you need both the serial number from your original purchase as well as the new serial number for Lightroom 5. If you have both of those numbers and they are still not being accepted then you will have to contact Adobe customer support for a solution.

  • Archive and Install, and then Aperture Serial Number gone!

    Hello,
    I just did an Archive and Install, because my MacBook Pro became sluggish. Naively I assumed that after this operation all programs would run. So far I have detected only one program that does not simply open as it did before the Archive and Install, and that is Aperture: Aperture asks me for my Serial Number. Since I moved three times in the past 18 months (including a major international move), I cannot find my original package with the Serial Number. I can prove that I purchased the software: I have the order number and the Apple Store shipment confirmation, but this does not include the serial number.
    My question is: since I have a Time Machine backup, where in the backup files of the Library is the Serial Number stored? I hope I can just go back in time, open the plist or whatever file contains the login for Aperture and get the number again. Does anyone know which file contains this information?
    Your help is much appreciated!
    Best,
    Kai

    it is always best to keep important info like serials safe
    contact Apple and see if you can get your serials http://support.apple.com/kb/HT1861

  • I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible..

    I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible... direct support stinks.

    Download AA 9 Pro from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Make a new backup for your archive. You might also take the DVD to your library to see if it is a drive problem. You might also carefully clean the DVD with water and soap (do not use anything that would scratch the surface or you have destroyed it for sure) and see if that solves the problem. This is particularly an issue if you have finger prints or other crud on the DVD. However, it could also be a bad drive as I mentioned. Hopefully the download solves your problem in any case (I would backup the download to CD and/or backup HD).

  • I did and Archive and Install on MBP with 10.4.11...now what?

    I recently performed an "Archive and Install" on my MBP that was having odd random shutdowns (not battery related). Just prior to this I used DiskWarrior 4.0 to fix errors to try to possibly cut down on the shutoffs. All it did was f**k up my machine so bad that as soon as the grey screen and apple logo came up, it was like this grey curtain went down and an "on/off" icon came up saying I had to restart. I was never able to boot my machine off my hard drive again until i did the archive and install. Everything seems fine now.
    My question is, I want to get the "old system" folder off my HD since it's taking up a lot of room. how do I know what files are critical and what ones aren't? I copied over my printers folder but all my other data seems to either be where it was before or it got moved over during the archive and install.
    Any help on what i HAVE to save before i trash the old system?
    Thanks!

    Cool, that was my first guess as to what to do. But now the old lockup issue has returned. I had put my MBP to sleep for an hour or so. When I came back up from sleep mode, I got the black box in the middle of the screen with the "on/off" button and the message that I had to restart or shut down. On restart when I clicked "report", the following came up in the box:
    panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x017b6900, CR3: 0x00e1a000, CR4: 0x000006e0
    EAX: 0x01610000, EBX: 0x017b6900, ECX: 0x00000420, EDX: 0x00000000
    CR2: 0x017b6900, EBP: 0x25153c38, ESI: 0x00001000, EDI: 0x00000000
    EFL: 0x00010202, EIP: 0x0017eaa9, CS: 0x00000008, DS: 0x03860010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x25153a18 : 0x128d0d (0x3cc65c 0x25153a3c 0x131f95 0x0)
    0x25153a58 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
    0x25153b68 : 0x19b3a4 (0x25153b80 0x18c296c 0x0 0x0)
    0x25153c38 : 0x15df65 (0x423d220 0x1000 0x0 0x14185d)
    0x25153c88 : 0x16214b (0x3f953e8 0x1801000 0x0 0x25153df4)
    0x25153d28 : 0x16e29d (0x3f953e8 0x25153df4 0x3f909f8 0x1801000)
    0x25153e78 : 0x37558d (0x1803000 0x0 0x3 0x0)
    0x25153eb8 : 0x3481e9 (0x1801600 0x0 0xb88 0x0)
    0x25153f58 : 0x37b300 (0x3fb67d0 0x48469a0 0x48469e4 0x0)
    0x25153fc8 : 0x19b77e (0x483eea0 0x0 0x19e0b5 0x4133348) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb0080be8
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Model: MacBookPro2,2, BootROM MBP22.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB
    Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.2.2
    Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
    Parallel ATA Device: MATSHITADVD-R UJ-857D
    USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Optical USB Mouse, Primax Electronics, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    Any ideas on what's causing the error, or is this the same one that i see posted all over this site with no resolution either from Apple or anyone else?

  • Files missing from library after archive and install

    Hi forum folk
    any help you could give would be much appreciated.
    I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
    thanks
    jb
    powerbookG4   Mac OS X (10.3.9)   running 10.3.4 at the moment - can't verify permissions on 10.3.9

    jbeep:
    my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
    Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
    I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
    Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
    I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
    Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
    Mac OS X 10.3/10.4: System maintenance
    Macintosh OS X Routine Maintenance
    Maintaining OS X.
    I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
    Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
    Do post back with an update of your progress and any further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • I had a live chat with an adobe person to help me to download again my Creative Suite 2 Premium, which I did, and now my serial number seems to not be any good.  Why, what do I do now?

    I had a live chat with an adobe person to help me to download again my Creative Suite 2 Premium, which I did, and now my serial number seems to not be any good.  Why, what do I do now?

    CS2 (and earlier) Activation Server replacement software
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup

  • I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    I would try contacting Apple.
    http://www.apple.com/support/ipodtouch/contact/

  • I bought Adobe Suite 4 on disc and I have a serial number but my new laptop doesn't have a CD drive. How do I install Photoshop CS4?

    I bought Adobe Suite 4 on disc and I have a serial number but my new laptop doesn't have a CD drive. How do I install Photoshop CS4?

    Download from Download CS4 products
    Install then enter your serial number.

  • Trying to install Adobe Photodeluxe (elements 13)   I have box and cd sleeve with serial number,   But registration won't let me type letters only numbers allowed.  Help please.

    Trying to install Adobe Photodeluxe (elements 13)   I have box and cd sleeve with serial number,   But registration won't let me type letters only numbers allowed.  Help please.

    You possibly have a redemption code which has to be converted into a serial number.
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • My old laptop broke so I got a new one.  I am trying to install Photoshop elements 7 and am entering my serial number but it isn't accepting it.  How do I fix this?

    My old laptop broke so I got a new one.  I am trying to install Photoshop elements 7 and am entering my serial number but it isn't accepting it.  How do I fix this?

    There is no serial number for CC Cloud versions. They are authenticated via your Adobe ID.
    Sign in to your Cloud account with your Adobe ID and download the software via the Cloud app.

  • I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

    I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

    Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
    Photoshop Elements
    Good luck on it! 
    Gene

  • I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    Hi hgratz,
    Considering 'invalid serial number' error for Acrobat 9, I would suggest you to please refer the KB doc link mentioned below:
    Error "Invalid serial number" | Acrobat 9 | CS4
    Let me know if that helps.
    Regards,
    Anubha

Maybe you are looking for