Archive Bits Not Setting

Hello,
I have just noticed a strange anomaly on our NetWare 6.5 SP4 server. I'm not sure how long this has been going on.
When some documents are created/saved on the server, the archive bit is not being set. We discovered this when a file was inadvertently deleted and while trying to restore it could not find it on our backup tapes (differential backup based on archive bit). As I searched around the various drives (both Windows and NetWare), I found that this is randomly (as far as I can tell) happening with all users, but only on our Netware server. The Windows server is fine.
It appears to be mostly MS Office documents, probably because that is mostly what we use here, but there are some PDFs missing the archive bit too. I have tried to create several test documents and am not able to reproduce it for myself. I had another user walk through and re-create several documents (duplicating the work from the day before where archive bits were not set), but while I was watching, all archive bits were set.
I did a search on the NetWare server for all documents created/modified since Sept 30 (our last full backup where all archive bits should have been reset). I found about 1000 documents that have been created/modified,but did not have the archive bit set. I then set the archive bit on all of them. This afternoon I re-ran that same search and came up with about 50 documents that were created/modified today that did not get the archive bit set. This represents about 25% of the files created/modified today.
I've searched the Internet and Novell's website looking for answers but haven't had any luck.
Has anyone else run into anything like this before?
thanks,
david

UPDATE:
The first day after I installed the updates, I had about 20 documents not get the archive bit set. That was fewer than the 100 or so I was getting per day before the updates.
In the last week or so since that day, I have now only had a few documents not get the archive bit set during the entire week. While it is not perfect, maybe it will continue to improve.
Thanks for all your help with this.
david
>>> David Hodgson<[email protected]> 10/27/2010 4:29 PM >>>
Hello,
I have just noticed a strange anomaly on our NetWare 6.5 SP4 server. I'm not sure how long this has been going on.
When some documents are created/saved on the server, the archive bit is not being set. We discovered this when a file was inadvertently deleted and while trying to restore it could not find it on our backup tapes (differential backup based on archive bit). As I searched around the various drives (both Windows and NetWare), I found that this is randomly (as far as I can tell) happening with all users, but only on our Netware server. The Windows server is fine.
It appears to be mostly MS Office documents, probably because that is mostly what we use here, but there are some PDFs missing the archive bit too. I have tried to create several test documents and am not able to reproduce it for myself. I had another user walk through and re-create several documents (duplicating the work from the day before where archive bits were not set), but while I was watching, all archive bits were set.
I did a search on the NetWare server for all documents created/modified since Sept 30 (our last full backup where all archive bits should have been reset). I found about 1000 documents that have been created/modified,but did not have the archive bit set. I then set the archive bit on all of them. This afternoon I re-ran that same search and came up with about 50 documents that were created/modified today that did not get the archive bit set. This represents about 25% of the files created/modified today.
I've searched the Internet and Novell's website looking for answers but haven't had any luck.
Has anyone else run into anything like this before?
thanks,
david

Similar Messages

  • Archive utility not setting permissions

    Hi All,
    I am hopeing someone can help me out with this wierd issue I am having.
    For some reason now when I expand zip files with the archive tool it creates files with no permissions.
    ----------  1 dalupus  staff     10805 Aug 25 19:27 1356724322803Log.txt
    Is there an option somewhere to tell the archiver what permissions to give files when expanding them?
    My understanding was that it was supposed to set correct permissions when expanding the files.
    Thanks,
    Mike

    If you launch archive utility,
    Go to Preferences:
    Change the "Save Expanded Files" Path to anything other than the default.
    Attempt an unarchive.
    Verify the zip file unarchived, then change the setting back to your preference.
    File / Exit
    Launch again to test.
    This solved the issue for me.
    My files were clearly unarchiving based on the disk and CPU utilization stats, but not saving to the same folder location.
    Not searchable via finder either.
    Now they work fine.

  • Lock NOT set for: Archiving the data from a data target

    Dear Expert,
    I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
    Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
    ==============================================================
    An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
    Lock NOT set for: Archiving the data from a data target             
    InfoProvider ZICCPS810 could not be locked for an archiving session 
    Job cancelled after system exception ERROR_MESSAGE                  
    ==============================================================
    Please Help Me.
    Wawan S

    Hi Wawan,
    If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
    Hope this helps,
    Naveen

  • Set the archive bit on files in a folder?

    While viewing files on my Mac from Windows machines on my network, the archive bit seems to be set on the files in soe directories. Setting the archive bit from the Windows machine appears to work, but the bit doesn't really get reset, as a quick refresh of the directory shows.
    Is there a way to (re-)set the archive bit (or any of the read/hidden/system/archive bits) for files on a drive that is neither NTFS nor FAT32? Does OS X allow for the setting of these bits?
    -=b=-

    The attrib command isn't a PowerShell cmdlet:
    http://ss64.com/nt/attrib.html
    If you're asking which line of your script this should replace, the answer is 'the entire thing'.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Question about: Use PowerShell to Toggle the Archive Bit on Files

    Hi Scripting Guys,
    thanks for you favorite scripts. but
    one question: the script abovementioned
    running. But I have to enter a -value
    for each file. If the script is not
    written so that each file checked for the archive
    and then changed? Apparently it
    does not work right with me.
    Here is the script again
    and also a screenshot. Over a short help I
    would be delighted.
    Stephan
    $path = "C:\fso"
    $files = Get-ChildItem -Path $path -Recurse
    $attribute = [io.fileattributes]::archive
    Foreach($file in $files)
     If((Get-ItemProperty -Path $file.fullname).attributes -band $attribute)
       "$file.fullname has the $attribute bit set, removing the bit."
       Set-ItemProperty -Path $file.fullname -Name attributes
       -value ((Get-ItemProperty $file.fullname).attributes -BXOR $attribute)
       "New value of $file.Fullname attributes"
       (Get-ItemProperty -Path $file.fullname).attributes
     ELSE
        Write-host -ForegroundColor blue
        "$file.fullname does not have the $attribute bit set, setting the bit."
        Set-ItemProperty -Path $file.fullname -Name attributes
          -value ((Get-ItemProperty $file.fullname).attributes -BXOR $attribute)
        "New value of $file.Fullname attributes"
       (Get-ItemProperty -Path $file.fullname).attributes
    } #end Foreach

    The attrib command isn't a PowerShell cmdlet:
    http://ss64.com/nt/attrib.html
    If you're asking which line of your script this should replace, the answer is 'the entire thing'.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Using a Variable in SSIS - Error - "Command text was not set for the command object.".

    Hi All,
    I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table  I have created variables v_Archivequery
    String packageLevel (to store the query).
    <Variable Name="V_Archivequery" DataType="String">
         SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
         FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
         ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
         Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
        </Variable>
    I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
    FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
    Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
    Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
    But when I am generating the package and when running I am getting bewlo errror
     Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
    An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80040E0C  Description: "Command text was not set for the command object.".
    Can Someone guide me whr am going wrong?
    Please let me know where am going wrong?
    Thanks in advance.
    Thankx & regards, Vipin jha MCP

    What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
    Could you try set the Delay Validation = True at Package and re-run ?
    If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
    -Vaibhav Chaudhari

  • "object reference not set to an instance of an object" error while running ssrs report locally

    Hi Folks,
    I am a bit new to SSRS.
    I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
    Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
    But while running the report I am getting "object reference not set to an instance of an object" error.
    For a note I am trying execute the report locally.
    Any help would be highly appreciable.
    sarat chandra sahoo

    Sorry for late reply Sinaloe..
    I have added a dll file in my report reference. And in a textbox trying to execute this below.
    =Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
    where Getstring() is a static method in the dll.
    I guess some configuration setting I am missing here.
    1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
    sarat chandra sahoo

  • Object reference not set to an instance of an object on clicking BI Tab

    Hi,
    I have installed Oracle BI Publisher Desktop 11.1.1.6.0 for 32 bit Office on Windows XP, Microsoft Word 10.
    However, after successful installation, when I open word and click on BI Publisher Tab , it throws error "Object reference not set to an instance of an object".
    Please help me resolve this setup issue.
    Thanks in Advance.
    Cheers,
    Sarika

    Hi,
    This is a general error message. I would ask the following questions to verify the issue:
    1. Are these charts  inside the table?
    2. Does the table display fine? What’s the size of the report and charts?
    Please try download the latest cumulative update package for SQL Server 2008 R2 Service Pack 2 from the following link and see if it address the issue:
    http://support.microsoft.com/kb/2730301/en-us
    You can also capture the screenshots regarding the issue so that I can understand
    problem in more details.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • "Object reference not set to an instance of an object" when using Sheel Shah's example

    I am attempting to use a custom add dialog as in http://blogs.msdn.com/b/lightswitch/archive/2011/07/07/creating-a-custom-add-or-edit-dialog.aspx and
    I get the error "Object reference not set to an instance of an object." when clicking my button to AddEntity().  My code to call the control is:
    User u = new User();
    userdialoghelper.AddEntity(u);
    Any ideas as to why I'm getting this error?  I "think" that I've set up the class properly?
    Scott

    I may be a couple of years late to the party here (using VS2013) but I also had some issues adapting to Yann's improvements over Sheel's code.
    Sheel's screen code as provided has the word "Old in the InitializeDataWorkspace and the created methods. this does not work when copy/pasted. ALso removed the "UI" from "InitialiseUI()"
    Following code can be used with Yann's Helper Class.
    Namespace LightSwitchApplication
    Public Class EditableCustomersGrid
    Private customersDialogHelper As ModalWindow
    Private Sub EditableCustomersGrid_InitializeDataWorkspace(saveChangesTo As System.Collections.Generic.List(Of Microsoft.LightSwitch.IDataService))
    customersDialogHelper = New ModalWindow(Me.Customers, "CustomerViewDialog")
    End Sub
    Private Sub EditableCustomersGrid_Created()
    customersDialogHelper.Initialise()
    End Sub
    Private Sub gridAddAndEditNew_CanExecute(ByRef result As Boolean)
    customersDialogHelper.CanAdd()
    End Sub
    Private Sub gridAddAndEditNew_Execute()
    customersDialogHelper.AddEntity()
    End Sub
    Private Sub gridEditSelected_CanExecute(ByRef result As Boolean)
    customersDialogHelper.CanView()
    End Sub
    Private Sub gridEditSelected_Execute()
    customersDialogHelper.ViewEntity()
    End Sub
    Private Sub EditDialogOk_Execute()
    customersDialogHelper.DialogOk()
    End Sub
    Private Sub EditDialogCancel_Execute()
    customersDialogHelper.DialogCancel()
    End Sub
    End Class
    End Namespace

  • 790FX-GD70 not setting RAM to correct timing nor voltage from SPED

    My 790FX-GD70 not setting RAM to correct timing nor voltage from SPED when set to auto. The RAM I have should be 6 6 6 20 @ 1.8V but the motherboard is setting it to 9 9 9 24 @ 1.5 V
    The RAM is   Crucial 2GB, Ballistix 240-pin DIMM, DDR3 PC3-10600 memory BL25664BA1336 • DDR3 PC3-10600 • 6-6-6-20 • Unbuffered • NON-ECC • DDR3-1333 • 1.8V • 256Meg x 64 of which i have two of then in the two black slots.
    Just to rule out the RAM I also tried a different model of RAM whose timing is 7 7 7 24 @ 1.65 which will not allow to boot to windows unless I adjust the voltage manually to 1.70 (1.65 V will still not boot properly)  it sets it also at 9 9 9 24 yet this same sticks of RAM will set correctly in a MSI 770 C45 without any adjustments.
    Now i will say in the case of the 790FX-GD70 I require no changes  in voltage for it to boot with the 1.8 V RAM just the timings are not as they should be. The 790FX-GD70 is stable as is and I will probably leave it at the auto settings  but wondered if anyone else  encountered similar issues with this board

    Looks like this is a bit of an issue for some other users of your RAM and not necessarily a MSI thing! This user has a ASUS board! Good luck and hope you get it sorted out.
    Backround:
    I bought some DDR3-1333 ram that was advertised as 6-6-6-20 @ 1.8v and, as expected, running on my board's default 1.5v it was only getting like 9-9-9-24. In fact, @ stock voltage the best I could boot up with (unknown stability) was 9-7-7. In an attempt to get the best (advertised?) performance I went ahead and manually set the timings to 6-6-6-20, left all other timings on auto, and upped the voltage to 1.8v
    Boots up fine and appears to be stable. However, I do notice the RAM is fairly warm to the touch whereas @ 1.5v it was pretty benign heat-wise. I tried running 1.785v but 3 out of 4 times it would hang on the windows desktop display. So I bumped it back up to 1.8v and I'll run Memtest 86 or something else later tonight.
    My question, being a noob and all...
    Is running at 1.8v going to hurt something? (See my setup MB, and CPU stats)
    Just to repeat, the box and manufacturer do list it as 1.8v spec. (FYI: BL25664BA1336)

  • Firm or Trade-Off Zone Indicator not set

    Hi
    I have created the scheduling agreement and run the MRP by this the schedule lines are generated but the system has not set Firm or Trade-Off Zone Indicator how do I go head? IS there any customization/master data required to set the this indicator?
    Please suggest.
    Regards,
    Prashant.

    This depends a bit on how you communicate to your vendors.
    Assuming EDI, then the message to the vendor will contain a few date fields
    A. ABFDE End of production go-ahead
    Which is the 'end' of the FIRM ZONE
    B. ABMDE End of material go-ahead
    Which is the 'end' of the TRADEOFF ZONE.
    Upon receipt the vendors system will recognize these dates.
    Assuming printout, you need to work in SAP-Script/Smartform to detail the effect of these date on your print.
    Either by also mentioning these in the item header (remember each item has an unique FZ/ToZ setting). Or by using special markers on the date lines, based on these dates.
    Regards
    JP

  • Archive Logs NOT APPLIED but transferred

    Hi Gurus,
    I have configured Primary & Standby databases in same Oracle Home. OS version is OEL 5. Database version is 10.2.0.1. I could get the archive logs in the standby site but they are not getting applied in the standby database. I don't have OLAP installed in my database version. Would this create this issue? However I attached my primary alert log details below for your reference:
    Thu Aug 30 23:55:37 2012
    Starting ORACLE instance (normal)
    Cannot determine all dependent dynamic libraries for /proc/self/exe
    Unable to find dynamic library libocr10.so in search paths
    RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
    LD_LIBRARY_PATH is not set!
    The default library directories are /lib and /usr/lib
    Unable to find dynamic library libocrb10.so in search paths
    Unable to find dynamic library libocrutl10.so in search paths
    Unable to find dynamic library libocrutl10.so in search paths
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =18
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    processes = 150
    sga_target = 289406976
    control_files = /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control01.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control02.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control03.ctl
    db_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim
    log_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWSTAND/onlinelog, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWPRIM/onlinelog
    db_block_size = 8192
    compatible = 10.2.0.1.0
    log_archive_config = DG_CONFIG=(newprim,newstand)
    log_archive_dest_1 = LOCATION=/home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/arch/
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
    DB_UNIQUE_NAME=newprim
    log_archive_dest_2 = SERVICE=newstand LGWR ASYNC VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=newstand
    log_archive_dest_state_1 = enable
    log_archive_dest_state_2 = enable
    log_archive_max_processes= 30
    log_archive_format = %t_%s_%r.dbf
    fal_client = newprim
    fal_server = newstand
    db_file_multiblock_read_count= 16
    db_recovery_file_dest = /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area
    db_recovery_file_dest_size= 2147483648
    standby_file_management = AUTO
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=newprimXDB)
    job_queue_processes = 10
    background_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump
    user_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump
    core_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/cdump
    audit_file_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/adump
    db_name = newprim
    db_unique_name = newprim
    open_cursors = 300
    pga_aggregate_target = 95420416
    PMON started with pid=2, OS id=28091
    PSP0 started with pid=3, OS id=28093
    MMAN started with pid=4, OS id=28095
    DBW0 started with pid=5, OS id=28097
    LGWR started with pid=6, OS id=28100
    CKPT started with pid=7, OS id=28102
    SMON started with pid=8, OS id=28104
    RECO started with pid=9, OS id=28106
    CJQ0 started with pid=10, OS id=28108
    MMON started with pid=11, OS id=28110
    MMNL started with pid=12, OS id=28112
    Thu Aug 30 23:55:38 2012
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 1 shared server(s) ...
    Thu Aug 30 23:55:38 2012
    ALTER DATABASE MOUNT
    Thu Aug 30 23:55:42 2012
    Setting recovery target incarnation to 2
    Thu Aug 30 23:55:43 2012
    Successful mount of redo thread 1, with mount id 1090395834
    Thu Aug 30 23:55:43 2012
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE MOUNT
    Thu Aug 30 23:55:43 2012
    ALTER DATABASE OPEN
    Thu Aug 30 23:55:43 2012
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=16, OS id=28122
    ARC1 started with pid=17, OS id=28124
    ARC2 started with pid=18, OS id=28126
    ARC3 started with pid=19, OS id=28128
    ARC4 started with pid=20, OS id=28133
    ARC5 started with pid=21, OS id=28135
    ARC6 started with pid=22, OS id=28137
    ARC7 started with pid=23, OS id=28139
    ARC8 started with pid=24, OS id=28141
    ARC9 started with pid=25, OS id=28143
    ARCa started with pid=26, OS id=28145
    ARCb started with pid=27, OS id=28147
    ARCc started with pid=28, OS id=28149
    ARCd started with pid=29, OS id=28151
    ARCe started with pid=30, OS id=28153
    ARCf started with pid=31, OS id=28155
    ARCg started with pid=32, OS id=28157
    ARCh started with pid=33, OS id=28159
    ARCi started with pid=34, OS id=28161
    ARCj started with pid=35, OS id=28163
    ARCk started with pid=36, OS id=28165
    ARCl started with pid=37, OS id=28167
    ARCm started with pid=38, OS id=28169
    ARCn started with pid=39, OS id=28171
    ARCo started with pid=40, OS id=28173
    ARCp started with pid=41, OS id=28175
    ARCq started with pid=42, OS id=28177
    ARCr started with pid=43, OS id=28179
    ARCs started with pid=44, OS id=28181
    Thu Aug 30 23:55:44 2012
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARCt started with pid=45, OS id=28183
    LNS1 started with pid=46, OS id=28185
    Thu Aug 30 23:55:48 2012
    Thread 1 advanced to log sequence 68
    Thu Aug 30 23:55:48 2012
    ARCo: Becoming the 'no FAL' ARCH
    ARCo: Becoming the 'no SRL' ARCH
    Thu Aug 30 23:55:48 2012
    ARCp: Becoming the heartbeat ARCH
    Thu Aug 30 23:55:48 2012
    Thread 1 opened at log sequence 68
    Current log# 1 seq# 68 mem# 0: /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/redo01.log
    Successful open of redo thread 1
    Thu Aug 30 23:55:48 2012
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Thu Aug 30 23:55:48 2012
    SMON: enabling cache recovery
    Thu Aug 30 23:55:48 2012
    Successfully onlined Undo Tablespace 1.
    Thu Aug 30 23:55:48 2012
    SMON: enabling tx recovery
    Thu Aug 30 23:55:49 2012
    Database Characterset is WE8ISO8859P1
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=47, OS id=28205
    Thu Aug 30 23:55:49 2012
    Error 1034 received logging on to the standby
    Thu Aug 30 23:55:49 2012
    Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
    ORA-01034: ORACLE not available
    FAL[server, ARC1]: Error 1034 creating remote archivelog file 'newstand'
    FAL[server, ARC1]: FAL archive failed, see trace file.
    Thu Aug 30 23:55:49 2012
    Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
    ORA-16055: FAL request rejected
    ARCH: FAL archive failed. Archiver continuing
    Thu Aug 30 23:55:49 2012
    ORACLE Instance newprim - Archival Error. Archiver continuing.
    Thu Aug 30 23:55:49 2012
    db_recovery_file_dest_size of 2048 MB is 9.77% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Thu Aug 30 23:55:50 2012
    Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump/newprim_ora_28120.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12663: Services required by client not available on the server
    ORA-36961: Oracle OLAP is not available.
    ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
    ORA-06512: at line 15
    Thu Aug 30 23:55:50 2012
    Completed: ALTER DATABASE OPEN
    Thu Aug 30 23:56:33 2012
    FAL[server]: Fail to queue the whole FAL gap
    GAP - thread 1 sequence 1-33
    DBID 1090398314 branch 792689455
    Kindly, guide me please..
    -Vimal.

    CKPT: The trace file details are added below for your reference;
    /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning and Data Mining options
    ORACLE_HOME = /home/oracle/oracle/product/10.2.0/db_1
    System name:     Linux
    Node name:     localhost.localdomain
    Release:     2.6.18-8.el5PAE
    Version:     #1 SMP Tue Jun 5 23:39:57 EDT 2007
    Machine:     i686
    Instance name: newprim
    Redo thread mounted by this instance: 1
    Oracle process number: 17
    Unix process pid: 28124, image: [email protected] (ARC1)
    *** SERVICE NAME:() 2012-08-30 23:55:48.314
    *** SESSION ID:(155.1) 2012-08-30 23:55:48.314
    kcrrwkx: nothing to do (start)
    Redo shipping client performing standby login
    OCISessionBegin failed -1
    .. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
    *** 2012-08-30 23:55:49.723 60679 kcrr.c
    Error 1034 received logging on to the standby
    Error 1034 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
    Error 1034 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
    ORA-01034: ORACLE not available
    *** 2012-08-30 23:55:49.723 58941 kcrr.c
    kcrrfail: dest:2 err:1034 force:0 blast:1
    kcrrwkx: unknown error:1034
    ORA-16055: FAL request rejected
    ARCH: Connecting to console port...
    ARCH: Connecting to console port...
    kcrrwkx: nothing to do (end)
    *** 2012-08-31 00:00:43.417
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:05:43.348
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:10:43.280
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:15:43.217
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:20:43.160
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:25:43.092
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:30:43.031
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:35:42.961
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:40:42.890
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:45:42.820
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:50:42.755
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 00:55:42.686
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 01:00:42.631
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 01:05:42.565
    kcrrwkx: nothing to do (start)
    *** 2012-08-31 01:10:42.496
    kcrrwkx: nothing to do (start)
    Mahir: Yes I have my 4 standby redo logs!
    I created the standby manually without using RMAN.
    Hemant: if it asks for even first thread, then obviously it shows nothing is applied on Standby. By the way so it is not called a 'GAP', I think..!
    Thanks.

  • HT4623 I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

    I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

  • Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

    Situation:
    SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
    Windows 7 - 64 bit.
    The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
    It uses 3 package variables:
    *) SQLCommand (String) to specify the SQL Statement to be executed by the package
    Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
    Value: f:\Output Data.xls
    *) EXCELOutputFIle (String) to specify path and filename of the Excel output file
    Property path: \Package.Variables[User::SQLCommand].Properties[Value]
    Value: select * from CartOrder
    *) VarObjectDataSet (Object) to hold the data returned by SQL Server)
    Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
    Value: System.Object
    It consists out of 2 components:
    *) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
    *) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
    Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
    However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
    This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only.  This makes me wonder if it is uberhaupt possible to set the value of a package variable
    of type Object.
    Can anybody help me on this please ?
    Message
    Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  6:40:20 PM  DTExec: Could
    not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object.  Started:  6:40:20 PM  Finished: 6:40:21 PM  Elapsed:  0.281 seconds.  The package execution failed.  The step failed.
    Thank you very much in advance
    Jurgen

    Hi Visakh,
    thank you for your reply.
    So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
    I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
    first question about the object type package variable.
    Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
    Thx in advance
    Jurgen
    Yes exactly
    You need to set values only forthem which needs to be controlled from outside the package
    Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
    Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • The OMS is not set up for Enterprise Manager Security

    Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
    bash-2.05$ ../../bin/emctl secure agent <password>
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Agent is already stopped... Done.
    Securing agent... Started.
    Requesting an HTTPS Upload URL from the OMS... Failed.
    The OMS is not set up for Enterprise Manager Security.
    i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
    heres the emdctl.trc on the agent machine:
    2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
    2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
    2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
    2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
    2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
    2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
    bash-2.05$ lsof | grep 3872
    bash-2.05$
    seems to be failing the connect but nothing is running on the port so i'm not sure why
    Thanks in advance
    Message was edited by:
    user581869

    some further information and hopefully someone can help me...
    I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
    $OMS_HOME/opmn/bin/opmnctl stopall
    $OMS_HOME/bin/emctl stop oms
    $OMS_HOME/bin/emctl secure oms
    $OMS_HOME/bin/emctl start oms
    $OMS_HOME/opmn/bin/opmnctl startall
    then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
    $AGENT_HOME/bin/emctl status agent -secure
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
    Agent is secure at HTTPS Port 3872.
    Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
    OMS is secure on HTTPS Port 1159
    I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
    $AGENT_HOME/bin/emctl status agent -secure
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
    Agent is unsecure at HTTP Port 3872.
    Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
    OMS is running but has not been secured. No HTTPS Port available.
    same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Maybe you are looking for