Archive BLOB File Recovery

I managed to not only erase the Archive folder for a user, but also the backup of the Archive folder. Recovered the Archive folder with a disk utility, but now when I try to access archives, I see the list of emails. However, upon selecting any of them, I get "Error c04f" Block checksum error. I've tried running GWCheck but it ends up deleting all the blob files saying they are invalid or not referenced. Is there a way to re-read those blob files into the message database, or am I out of luck.
Thanks ahead for any ideas, suggestions.

Hi,
It could be a corrupt ngwguard.db file. You could try the following, but only do this on a backup in case it makes things worse:
Recreate the guardian database:
1. Rename the archive directory.
2. Login to GW client, archive a message. This will recreate the archive directory, ngwguard.db, user.db, msg.db files.
3. Copy the NGWGUARD.DB ONLY from the new archive directory to the renamed archive directory.
4. Rename the archive directory back to its original name (delete the new directory).
5. Perform a structure check on the archive. It should run clean.
6. Login to GW client, open archive.
Let us know how it goes.
Cheers,

Similar Messages

RMAN: How to apply Archive Logs after recoverying of all physical files

Hi;
I am using RMAN Oracle10g; my test database has being corrupted. I have already taken 0 level backup through this command
run {
allocate channel c1 type disk;
backup incremental level 0 tag = Test_Weekly_database format 'O:\rman\backup\Full_Weekly_%d_%s_%p_%t'(database);
release channel c1;
configure controlfile autobackup format for device type disk to 'O:\rman\backup\Auto_Ctrl_weekly_%F';
allocate channel c1 type disk;
sql 'alter system archive log current';
BACKUP tag = Test_Weekly_Arch ARCHIVELOG UNTIL TIME 'SYSDATE-7' format 'O:\rman\backup\Archive_weekly_%d_%s_%p_%t';
DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
release channel c1;
After backing up I inserted few records in TEST123 table. And switch current log file.
Then my database has been corrupted. Now I have last 0 level backup (RMAN) and archive logs files on OS level.
I am recovering my database with the following commands; but archive logs have not being applied. And my inserted records were not presented in TEST123 table.
Kindly guide me
SQL> startup nomount
CMD> RMAN target=/
RMAN>set DBID 1168995671
RMAN>RUN {
SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'O:\rman\backup\Auto_Ctrl_weekly_%F';
RESTORE CONTROLFILE from autobackup;
RMAN> ALTER DATABASE MOUNT;
RMAN> RESTORE DATABASE CHECK READONLY;
RMAN> RECOVER DATABASE NOREDO;
RMAN> restore archivelog all;
SQL> startup mount
SQL> alter database backup controlfile to trace;
SQL> shut immediate
SQL> startup nomount
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG................;
SQL> alter database open resetlogs
---Database altered.
SQL> select * from TEST123;
Not record found
regards;
Asim

Dear Khurram;
Kindly advise where i m worrg???????
C:\>RMAN target=/
RMAN> set DBID 1168995671
executing command: SET DBID
RMAN> RUN {
2> SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'O:\rman\backup\Auto_Ctrl_weekly_%F';
3> RESTORE CONTROLFILE from autobackup;
4> }
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
Starting restore at 27-DEC-07
using channel ORA_DISK_1
recovery area destination: O:\rman\backup
database name (or database unique name) used for search: ORCL
channel ORA_DISK_1: no autobackups found in the recovery area
channel ORA_DISK_1: looking for autobackup on day: 20071227
channel ORA_DISK_1: autobackup found: O:\rman\backup\Auto_Ctrl_weekly_c-11689956
71-20071227-04
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL
output filename=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL
output filename=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
Finished restore at 27-DEC-07
RMAN> ALTER DATABASE MOUNT;
database mounted
released channel: ORA_DISK_1
RMAN> RESTORE DATABASE CHECK READONLY;
Starting restore at 27-DEC-07
Starting implicit crosscheck backup at 27-DEC-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=154 devtype=DISK
Crosschecked 9 objects
Finished implicit crosscheck backup at 27-DEC-07
Starting implicit crosscheck copy at 27-DEC-07
using channel ORA_DISK_1
using channel ORA_DISK_2
Finished implicit crosscheck copy at 27-DEC-07
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
restoring datafile 00005 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\TEST.DBF
restoring datafile 00006 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\TEST2
channel ORA_DISK_1: reading from backup piece O:\RMAN\BACKUP\FULL_WEEKLY_ORCL_3_
1_642420573
channel ORA_DISK_1: restored backup piece 1
piece handle=O:\RMAN\BACKUP\FULL_WEEKLY_ORCL_3_1_642420573 tag=Test_WEEKLY_DATAB
ASE
channel ORA_DISK_1: restore complete, elapsed time: 00:00:46
Finished restore at 27-DEC-07
RMAN> restore archivelog all;
archive log thread 1 sequence 1 is already on disk as file O:\ARCHIVE\ARC00001_0642356125.001
archive log thread 1 sequence 2 is already on disk as file O:\ARCHIVE\ARC00002_0642356125.001
archive log thread 1 sequence 3 is already on disk as file O:\ARCHIVE\ARC00003_0642356125.001
archive log thread 1 sequence 4 is already on disk as file O:\ARCHIVE\ARC00004_0642356125.001
archive log thread 1 sequence 5 is already on disk as file O:\ARCHIVE\ARC00005_0642356125.001
archive log thread 1 sequence 6 is already on disk as file O:\ARCHIVE\ARC00006_0642356125.001
archive log thread 1 sequence 7 is already on disk as file O:\ARCHIVE\ARC00007_0642356125.001
archive log thread 1 sequence 8 is already on disk as file O:\ARCHIVE\ARC00008_0642356125.001
archive log thread 1 sequence 9 is already on disk as file O:\ARCHIVE\ARC00009_0642356125.001
archive log thread 1 sequence 10 is already on disk as file O:\ARCHIVE\ARC00010_0642356125.001
archive log thread 1 sequence 11 is already on disk as file O:\ARCHIVE\ARC00011_0642356125.001
archive log thread 1 sequence 12 is already on disk as file O:\ARCHIVE\ARC00012_0642356125.001
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=15
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=16
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=17
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=19
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=20
channel ORA_DISK_1: reading from backup piece O:\RMAN\BACKUP\ARCHIVE_WEEKLY_ORCL_5_1_642420630
channel ORA_DISK_1: restored backup piece 1
piece handle=O:\RMAN\BACKUP\ARCHIVE_WEEKLY_ORCL_5_1_642420630 tag=Test_WEEKLY_ARCH
channel ORA_DISK_1: restore complete, elapsed time: 00:00:08
Finished restore at 27-DEC-07
RMAN> ALTER DATABASE OPEN;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 12/27/2007 10:27:10
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
Regards;
Asim

How do i delete archive log files manually?

My db is running in oracle 10.2.0.4. somehow, the RMAN command is not deleting archived backup files. I need to delete those files manually at os level. how do i find till which archivelog files are backed up through RMAN?

RMAN> connect target
connected to target database: INVENT (DBID=1001824944)
using target database control file instead of recovery catalog
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/ora/app/oracle/product/10.2.0/db_1/dbs/snapcf_INVENT.f'; # default
RMAN>
Here is the commands....
connect target;
run
allocate channel t1 device type disk format /target/ret/%U';
set command id to 'L0 Backup';
delete noprompt obsolete;
backup incremental level 0 as compressed backupset database;
release channel t1;
connect target;
run
allocate channel t1 device type disk format /target/ret/%U';
set command id to 'L1 Backup';
delete noprompt obsolete;
backup incremental level 1 as compressed backupset database;
release channel t1;
}

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Will RMAN delete archive log files on a Standby server?

Environment:
Oracle 11.2.0.3 EE on Solaris 10.5
I am currently NOT using an RMAN repository (coming soon).
I have a Primary database sending log files to a Standby.
My Retention Policy is set to 'RECOVERY WINDOW OF 8 DAYS'.
Question: Will RMAN delete the archive log files on the Standby server after they become obsolete based on the Retention Policy or do I need to remove them manually via O/S command?
Does the fact that I'm NOT using an RMAN Repository at the moment make a difference?
Couldn't find the answer in the docs.
Thanks very much!!
-gary

Hello again Gary;
Sorry for the delay.
Why is what you suggested better?
No, its not better, but I prefer to manage the archive. This method works, period.
Does that fact (running a backup every 4 hours) make my archivelog deletion policy irrelevant?
No. The policy is important.
Having the Primary set to :
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBYBut set to "NONE" on the Standby.
Means the worst thing that can happen is RMAN will bark when you try to delete something. ( this is a good thing )
How do I prevent the archive backup process from backing up an archive log file before it gets shipped to the standby?
Should be a non-issue, the archive does not move, the REDO is transported and applied. There's SQL to monitor both ( Transport and Apply )
For Data Guard I would consider getting a copy of
"Oracle Data Guard 11g Handbook" - Larry Carpenter (AKA Dr. Paranoid ) ISBN 978-0-07-162111-2
Best Oracle book I've read in 10 years. Covers a ton of ground clearly.
Also Data Guard forum here :
Data Guard
Best Regards
mseberg
Edited by: mseberg on Apr 10, 2012 4:39 PM

How to restore cold backup + archived log files

Hi,
Suppose I take a cold backup on 18th. After that I have four days of archived log files. if the database crashes on 5th day, I have to restore the 18th cold back + 4 days of archived log files. How do I restore since it is a cold backup and I cant do incomplete recovery.
can I use
Recover database ( with 18th cold backup) in mount state and apply archived logs.
Prabhath

The details of how you perform forward recovery using a cold backup depends on
1- rman or manual backup
2- using current or backup control file
3- if rman, recovery catalog or no recovery catalog
4- if full database recovered or only a few files
Each of these conditions will affect what is known to Oracle and what needs to be done. For example if you restored the entire cold backup including the control file then Oracle would see a consistent database and not need to perform recovery so you would need to startup mount and tell the database to perform recovery using a backup control file. If using rman and no recovery catalog you might need to catalog some of the archived redo logs, etc....
It is advisable to consult the Backup and Recovery manuals before attempting recovery for any new scenario.
HTH -- Mark D Powell --

How to recover the database when some of the archive log file get deleted.

I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AM

Hi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

Problem about space management of archived log files

Dear friends,
I have a problem about space management of archived log files.
my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
Daily Script:
run {
allocate channel oem_disk_backup device type disk;
recover copy of database with tag 'ORA$OEM_LEVEL_0';
backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
sorry for the long message, I just want to describe in details to easy diagnosis.
any hint will be greatly appreciated!
Sammy

thank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again.

How to recover a lost archive log file?

How to recover a lost archive log file? Do I need to open the database with RESETLOGS after recovery?-------No.156

I think he might rewrite the question in his own words.
I guess in the event of lost archive logs during db recovery, you have to open RESETLOGS and say goodbye to some of the data.

Archived log file are not shifted to standby side and applied

Hi Guru's,
DB
My OS Version:Windows Server 2003
DB Version:11.2.0.1.0
I am trying to create Physical Standby DB on my test machine after setting all the parameters and start standby db in mount mode when i do the verification of archived log files that need to be shift from pri site to standby site i am getting:
no rows selected.
I am following the below mentioned doc for reference
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
Can anyone from your side can help me to sort out this problem.
Thanks in advance

vk82 wrote:
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
39
SQL> select process,status,sequence# from v$managed_standby;
PROCESS STATUS SEQUENCE#
ARCH CLOSING 38
ARCH CLOSING 36
ARCH CONNECTED 0
ARCH CLOSING 37
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
39
Yes the max sequence generated on primary is same as the max sequence applied on standby.
And what is MRP and why it is important can you please let me know abt thisWhenever you created standby database, Make a habit of tail to alert log file to monitor whats happening on the standby database, Besides MRP is an Media Recovery Process , which applies archies/redo on standby database.
MRP can apply based on the redo transport, If you are using real-time apply then Redo will be writtened to the standby redo log files at the same time recovery will be performed by MRP process, If you are not using Real-Time apply then whenever a archive generated on primary that archive will be transported to the standby and applied on the standby database.
It is recommended to use Realtime apply, so that you can avoid much data lost.
However you are in 11gR2, You can use below query to monitor
SQL> SELECT * FROM V$STANDBY_EVENT_HISTOGRAM WHERE NAME = 'apply lag' AND COUNT > 0;
NAME             TIME UNIT                  COUNT LAST_TIME_UPDATED
apply lag           0 seconds                 431 08/05/2012 22:14:21
apply lag           1 seconds                   7 08/05/2012 22:13:31
SQL>Edited by: CKPT on Nov 6, 2012 6:49 PM

Archived Log files

Hello,
I have a understanding problem off the function of the archived log files. My Oracle 9i Database is running in ARCHIVELOG. So if the online log files are full they get backed up to 3 different locations.
However if I view now the v$archive_log view then I see all the archived log files.
So now my questions:
1. At which point does these archived log files get deleted ?
2. If they never get deleted how do I know which archived log file can I delete.
3. If I run a full hot/cold backup can I delete this archive log files?
4. Is there any other way to delete the archived log files then using rman "delete input" option ? Like is there any way to delete the archived log files form the sqplplus prompt ?
I have searched and read some articles in the net about it but it is always just about how to set up the db into archivelog mode but I was not able to find anything answering my questions.
Thank you
Marcus

Out of the box, archived logs are not deleted
automatically. However, you can delete them via
RMAN. RMAN will delete them based on the set
retention policy. You can see which logs and
backups RMAN considers obsolete via the "report
obsolete" command. RMAN keeps track of logs that
are necessary for recovery, and those that can
be safely deleted.
Another option, as you have noted, is to backup
archivelogs using RMAN, with the "delete input"
option.
The best option (IMHO) is to automate deletion
of obsolete archive logs via a script. This
can be done using the "delete noprompt obsolete"
RMAN command.
I'm not aware of any SQLPlus based method to delete
logs. In any case, this would NOT be a good idea, as
RMAN would not be aware of any such deletions.
Hope this helps.
Kailash.

Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Error after Restoring Datafiles in Archivelog but missing archive log files

Hi all,
I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB .
I m happy to have my datafile contents till yesterday morning.
But after restoring when i try to open th DB, i m facing the following errors:
SQL>          Startup open;
Oracle instance started but in mounted stagell
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL>         alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
          ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL>         recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
ORA - 01112: media recovery not started
SQL>   recover;
ORA-00283: recovery session cancelled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
Alert Log File:
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes                = 80
sessions                 = 96
event                    = 10191 trace name context forever, level 1
sga_max_size             = 633339904
shared_pool_size         = 301989888
shared_pool_reserved_size= 30183260
filesystemio_options     = setall
control_files            = E:\ORACLE\IE6\ORIGLOGA\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\ORIGLOGB\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\SAPDATA1\CNTRL\CNTRLIE6.DBF
control_file_record_keep_time= 30
db_block_size            = 8192
db_cache_size            = 301989888
compatible               = 10.2.0
log_archive_dest         = E:\oracle\IE6\oraarch\IE6arch
log_buffer               = 2854912
log_checkpoint_interval = 0
db_files                 = 254
log_checkpoints_to_alert = TRUE
dml_locks                = 4000
undo_management          = AUTO
undo_tablespace          = PSAPUNDO
undo_retention           = 43200
recyclebin               = off
remote_os_authent        = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes      = 1
background_dump_dest     = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
user_dump_dest           = E:\ORACLE\IE6\SAPTRACE\USERTRACE
core_dump_dest           = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = IE6
open_cursors             = 800
optimpeek_user_binds   = FALSE
pga_aggregate_target     = 402443468
workarea_size_policy     = AUTO
statistics_level         = typical
PMON started with pid=2, OS id=804
PSP0 started with pid=3, OS id=9580
MMAN started with pid=4, OS id=5840
DBW0 started with pid=5, OS id=8136
LGWR started with pid=6, OS id=8712
CKPT started with pid=7, OS id=1620
SMON started with pid=8, OS id=7084
RECO started with pid=9, OS id=9576
CJQ0 started with pid=10, OS id=9156
MMON started with pid=11, OS id=6000
MMNL started with pid=12, OS id=2856
Sat Apr 18 04:01:29 2009
ALTER DATABASE   MOUNT
Sat Apr 18 04:01:33 2009
Setting recovery target incarnation to 1
Sat Apr 18 04:01:33 2009
Successful mount of redo thread 1, with mount id 1124466585
Sat Apr 18 04:01:33 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Sat Apr 18 04:01:34 2009
ALTER DATABASE OPEN
ORA-1589 signalled during: ALTER DATABASE OPEN...
Sat Apr 18 04:02:13 2009
alter database open resetlogs
Sat Apr 18 04:02:13 2009
ORA-1245 signalled during: alter database open resetlogs...
Sat Apr 18 04:11:05 2009
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL
Sat Apr 18 04:11:05 2009
Media Recovery Start
Sat Apr 18 04:11:06 2009
Media Recovery failed with error 1610
ORA-283 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL...
Sat Apr 18 04:11:28 2009
ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE
Sat Apr 18 04:11:28 2009
Media Recovery Start
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE...
Sat Apr 18 04:17:23 2009
ALTER DATABASE RECOVER database using backup controlfile until cancel
Sat Apr 18 04:17:23 2009
Media Recovery Start
ORA-275 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
Any suggestions pls..............
Thanks & Regards,
Subbu

Hello Subbu,
> I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files.
You mean you have taken an online backup and lost all your archive log files after that online backup?
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
To perform a recovery with an online backup you will need all archive log files until the end of the online backup. If you have lost them you are not able to recover (or open) your database in a consistent state.
So the only suggestion we can do is:
You need the archive log files that were created during the online backup to perform an incomplete recovery ... if they are gone you can not restore your database.
Regards
Stefan

How to delete archive log files from ASM through Grid Control

Hi
Anybody suggest me how to delete archive log files from ASM through Grid Control.
Thanks

It is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
~ Madrid
http://hrivera99.blogspot.com/

Oracle write archive log files continuosly

Hi all,
I don't know why my Oracle Database has this problem. Online log are writen to archive log file continuously(3 minutes period). My archive logfile is 300M. I have startup force my database. It work, but archive log files are writen so much. This is alert log:
>
Sat Jan 1 14:23:19 2011
Successfully onlined Undo Tablespace 5.
Sat Jan 1 14:23:19 2011
SMON: enabling tx recovery
Sat Jan 1 14:23:19 2011
Database Characterset is AL32UTF8
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Sat Jan 1 14:23:40 2011
WARNING: AQ_TM_PROCESSES is set to 0. System operation might be adversely affected.
Sat Jan 1 14:24:32 2011
db_recovery_file_dest_size of 204800 MB is 28.64% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Sat Jan 1 14:24:40 2011
Completed: ALTER DATABASE OPEN
Sat Jan 1 14:27:05 2011
Warning: PROCESSES may be too low for current load
shared servers=360, want 7 more but starting only 3 more
Warning: PROCESSES may be too low for current load
shared servers=363, want 9 more but starting only 0 more
Sat Jan 1 14:27:39 2011
Warning: PROCESSES may be too low for current load
shared servers=363, want 9 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=364, want 9 more but starting only 0 more
Sat Jan 1 14:28:58 2011
Thread 1 advanced to log sequence 9463 (LGWR switch)
Current log# 3 seq# 9463 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9463 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:30:20 2011
Errors in file /opt/app/oracle/admin/TNORA3/bdump/tnora_j000_17762.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00018: maximum number of sessions exceeded
Sat Jan 1 14:39:47 2011
Thread 1 advanced to log sequence 9464 (LGWR switch)
Current log# 1 seq# 9464 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9464 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 14:42:51 2011
Errors in file /opt/app/oracle/admin/TNORA3/bdump/tnora_s008_17165.trc:
ORA-07445: exception encountered: core dump [_intel_fast_memcpy.J()+80] [SIGSEGV] [Address not mapped to object] [0x2B8988CE2018] [] []
Sat Jan 1 14:42:57 2011
Thread 1 advanced to log sequence 9465 (LGWR switch)
Current log# 2 seq# 9465 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9465 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 14:43:11 2011
found dead shared server 'S008', pid = (42, 1)
Sat Jan 1 14:45:39 2011
Thread 1 advanced to log sequence 9466 (LGWR switch)
Current log# 3 seq# 9466 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9466 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:48:47 2011
Thread 1 cannot allocate new log, sequence 9467
Checkpoint not complete
Current log# 3 seq# 9466 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9466 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:48:50 2011
Thread 1 advanced to log sequence 9467 (LGWR switch)
Current log# 1 seq# 9467 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9467 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 14:52:11 2011
Thread 1 advanced to log sequence 9468 (LGWR switch)
Current log# 2 seq# 9468 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9468 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 14:55:12 2011
Thread 1 advanced to log sequence 9469 (LGWR switch)
Current log# 3 seq# 9469 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9469 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:58:12 2011
Thread 1 advanced to log sequence 9470 (LGWR switch)
Current log# 1 seq# 9470 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9470 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:02:00 2011
Thread 1 advanced to log sequence 9471 (LGWR switch)
Current log# 2 seq# 9471 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9471 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 15:05:16 2011
Thread 1 advanced to log sequence 9472 (LGWR switch)
Current log# 3 seq# 9472 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9472 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 15:08:30 2011
Thread 1 advanced to log sequence 9473 (LGWR switch)
Current log# 1 seq# 9473 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9473 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:11:12 2011
Thread 1 cannot allocate new log, sequence 9474
Checkpoint not complete
Current log# 1 seq# 9473 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9473 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:11:14 2011
Thread 1 advanced to log sequence 9474 (LGWR switch)
Current log# 2 seq# 9474 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9474 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 15:14:15 2011
Thread 1 advanced to log sequence 9475 (LGWR switch)
Current log# 3 seq# 9475 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9475 mem# 1: /u02/oradata/TNORA3/redo03b.log
>
PLs, help me.

This is the contait of tail -100 /opt/app/oracle/admin/TNORA3/bdump/tnora_s008_17165.trc | more
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1569
KCBS: nbseg[3] is 1568
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1569
KCBS: nbseg[7] is 1568
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1569
KCBS: nbseg[11] is 1568
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1569
KCBS: nbseg[15] is 1568
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1569
KCBS: nbseg[19] is 1568
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 445
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1569
KCBS: nbseg[3] is 1568
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1569
KCBS: nbseg[7] is 1568
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1569
KCBS: nbseg[11] is 1568
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1569
KCBS: nbseg[15] is 1568
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1569
KCBS: nbseg[19] is 1568
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 445
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1568
KCBS: nbseg[3] is 1569
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1568
KCBS: nbseg[7] is 1569
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1568
KCBS: nbseg[11] is 1569
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1568
KCBS: nbseg[15] is 1569
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1568
KCBS: nbseg[19] is 1569
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 444
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1568
KCBS: nbseg[3] is 1569
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1568
KCBS: nbseg[7] is 1569
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1568
KCBS: nbseg[11] is 1569
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1568
KCBS: nbseg[15] is 1569
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1568
KCBS: nbseg[19] is 1569
KCBS: Act cnt = 15713
KSOLS: Begin dumping all object level stats elements
KSOLS: Done dumping all elements. Exiting.
Dump event group for SESSION
Unable to dump event group - no SESSION state objectDump event group for SYSTEM
ssexhd: crashing the process...
Shadow_Core_Dump = partial

Archive BLOB File Recovery

Similar Messages

Maybe you are looking for