Archive config does not allow me to specify the bootflash as the path
Hi,
I am trying to setup up archive config on a couple of ASR 1000 routers but it wont let me specify the bootflash for path. Path to tftp works fine.
emmansfi-1002-1#mkdir bootflash:/archive
Create directory filename [archive]?
Created dir bootflash:/archive
emmansfi-1002-1#conf t
emmansfi-1002-1(config-archive-log-cfg)# path bootflash:/archive/
The path specified is not available
emmansfi-1002-1#mkdir fpd:/archive
Create directory filename [archive]?
Created dir fpd:/archive
emmansfi-1002-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
emmansfi-1002-1(config)#archive
emmansfi-1002-1(config-archive)# path fpd:/archive
The path specified is not available
emmansfi-1002-1#show platform
Chassis type: ASR1002
Slot Type State Insert time (ago)
0 ASR1002-SIP10 ok 3y19w
0/0 4XGE-BUILT-IN ok 3y19w
R0 ASR1002-RP1 ok, active 3y19w
F0 ASR1000-ESP5 ok, active 3y19w
P0 ASR1002-PWR-AC ok 3y19w
P1 ASR1002-PWR-AC ok 3y19w
Slot CPLD Version Firmware Version
0 07120202 12.2(33r)XNC
R0 08011017 12.2(33r)XNC
F0 07091401 12.2(33r)XNB
emmansfi-1002-1#dir
Directory of bootflash:/
11 drwx 16384 Aug 4 2010 08:45:04 +01:00 lost+found
12 -rw- 208130308 Aug 4 2010 08:47:07 +01:00 asr1000rp1-adventerprisek9.02.03.02.122-33.XNC2.bin
747777 drwx 4096 Aug 4 2010 08:46:59 +01:00 .installer
97537 drwx 4096 Nov 11 2013 17:44:19 +00:00 core
764033 drwx 4096 Aug 4 2010 09:14:31 +01:00 .prst_sync
406401 drwx 4096 Aug 4 2010 09:14:39 +01:00 .rollback_timer
13 -rw- 0 Aug 4 2010 09:15:05 +01:00 tracelogs.660
520193 drwx 8192 Mar 19 2014 11:19:45 +00:00 tracelogs
455169 drwx 4096 Mar 19 2014 11:02:25 +00:00 archive
32513 drwx 4096 Mar 19 2014 11:02:35 +00:00 logging
7860539392 bytes total (7044546560 bytes free)
emmansfi-1002-1#
Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files":
Similar Messages
-
When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?
Start here.
-
My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?
My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?
-
I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me outIn most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.
-
When I send/forward an email I get an error message that the recipient does not allow "relaying". It doesn't matter who the recipient is.
Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server>SMTP>Primary Server then turn Server ON and fill in both User Name & Password>under Outgoing Mail Server.
-
The upgrade notification did not give a free download icon so I asked you and you replyed with an email with a link. I went to the page and could happily download nr 5 instead of 6 but well.
Now firefox gives still the notification to upgrade and what i downloaded does not work on my mac with safari.
So can i savely stay with 3.6 ?You can't use Firefox 4 on Mac OS X 10.4, on on 10.5 you need the Intel chip.
It would be easier if you replied to your original question, so someone can see what you are talking about. There are a lot of questions asked even in a single day so we can't see what that was easily. If you need to redownload 3.6.17 then
http://www.mozilla.com/en-US/firefox/all-older.html
I tried a search on your name and that didn't work, but you could possibly have found your previous post via the "My contributions" link at the top of
https://support.mozilla.com/questions
I doubt that Firefox 5 or 6 would be any different, once support is dropped for hardware or operating system it stays dropped, you need to stay with version 3. -
I have been trying to setup Timed Access Control in Airport Utility and it does not seem to be working correctly.
In Airport Utility from Edit Timed Access Control I Enter a name for my device (iPad/iPhone any device), enter my mac address, set time for Everyday and use default Between 9:00 AM and 5:00 PM, save and then update. When I go to my device iPad iPhone etc. I still have access even when it is after the time set, 5:00PM. If I set no access it will restrict access also I set a time between 2:00 PM and 5:00 PM and access was restricted. It doesnt seem to matter what the device is. I know that the MAC Adress is set correctly. It seems like an issue with the Utility, possibly time miss match or something. Not sure if I am missing something or if this Utility just has flaws. Please Help.I changed the default to (no access) and set an entry for my test device (an iPad) to "Everyday Between 9am to 5pm. The iPad was still able to gain access to the network.
Something else to note, if I try to edit the time of an entry it gives me an error on my MBP "Invalid value", "The value for “Timed Access Control” is invalid." This happens even if I delete a digit (number or letter in the time field) and replace with the exact same. Not sure if the two are related. I have tried to edit access from my iPad. I don't get any errors but I still don't get the expected results. I called Apple to try and get Tech support but they were not much help. Thanks again. -
My new ipad mini will not let me switch between modes when using the built in camera app. It is stuck on Video mode. I am unable to take photos, although I could when I first used it. Could this be a fault with the pad or with the new 7.0.4 update? Can anyone help please?
Have you tried to force quit the app? Double tap the home button. Scroll sideways if needed to see the icon and preview for the camera app. Flip that app up and off the screen to close it then single tap on the home screen preview or single tap the home button to exit the mode.
Try your camera app again and see if you can switch modes.
When you switch modes, you do have to drag the words, not just tap on the video word, if that makes any sense. When you try to go from video to photo, do you try to drag the photo word to the front? -
HELP
Have you:
- Tried another network?
- Does the iPod see the network?
- Tried a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powered off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Setting
- iOS: Troubleshooting Wi-Fi networks and connections
- Changing the encryption on the router? -
BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data
Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
DeepthiCheck the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed. -
Does not allow to set time characteristics while performing Partition
I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
● You did not partition the InfoCube when you created it.
● You loaded more data into your InfoCube than you had planned when you partitioned it.
● You did not choose a long enough period of time for partitioning.
● Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning -
How to block a payment in F110, when the system does not allow us to block
Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SLDear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi -
Acrobat does not allow connection to
Need help with this error message please. Using Win7, saved a Word 2010 table of contents with multiple links to pdf files across internal servers as a PDF. Also created the word doc w/multiple pdf links as a PDF file using acrobat9 standard and have same problems. when a user with Adobe Reader 8+ clicks on a pdf link in the PDF table of contents file, they get an error message Acrobat does not allow connection to: and they cannot open the linked file. However, I am able to open the files using the same links with both reader and acrobat.
This worked previously until we upgraded to these versions of software... the error message shows a number of % signs and multiple ////. However, i can open the fiile but others cannot.
anyone have any ideas or is this a fix that i need to download?not sure where my previous reply went; however, there are numerous machines at varuious sites that will be accessing this server/folder. I am not sure if it is a trusted sites issue as the file lists numerous PDF links and some of them open to the respective pdf file and others recieve the mssage. All the files reside on the same server within the same main folder and within subfolders. never had the problem before. the users can open some of the linked files and others the connection msg appears. I however, am able to open the same links they get the error on. I am totally baffled by this and have been troubleshooting for weeks now. I just had acrobat X installed to see if that would help but still problem. I also saved the word doc (2010) as pdf (which lists the links to the other pdfs) but users still have same problem. there are approx 75 links within this doc and I truly hope we don't have to relink everything..
-
Problems with Repousse 3D feature in Photoshop CS5 Extended
I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
Can someone please help me fix this? Thanks.If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …
-
was able to edit text and add text and now does not allow me to do anything - Except purchase the software again.Can't find an answer to this anywhere.
Use Adobe Acrobat, not Adobe Reader.
Maybe you are looking for
-
How can I link out to a live web site and get the learner back to the module after they 'x' out of the site? Is there a setting where if the learner clicks the box it will open in a new window?
-
i have accessed a free wi-fi network on my iphone but when i try to go into the itunes store from phone it wont open. how do i open the store
-
Fiscal Year Change -Clarification Please reply
Hi, I am going to change the fiscal year to year dependant fiscal year on 3rd of January 2009. Is there any problem if any postings happend on 2nd january 2009 with the Old fisacl year K4 I am worring about this.Kindly advice me. Thanks Sunitha
-
Now Logic won't open. What should I do?
I had two versions of Logic Pro on my laptop (Logic Pro 8 and Logic Pro), so I deleted the older version. Now Logic won't open. What should I do? I also upgraded to Mavericks lastnight, but it worked fine until just now.
-
Just recently my brush tool lost it's designated shape. It converted itself just to a set of crosshairs. Now you can't see what shape you're using, or the placement. I got into driver updates, and successfully updated my video card drivers. I got the