Archive date no longer appears in metadata?

I have noticed that for a while now the Archive field in the metadata tab of the inspector remains blank despite the fact that I archive pretty much every time I use Aperture (and the archive process seems to work - the 'thermometer bar' window pops up and shows progress until completion). I recall back in the Aperture 1 or even v2 days the date that appeared in this field was (at least presumably) the date the archive was made - I'm assuming the system does not replicate archiving efforts to images that remain untouched). But the date just appears blank - any ideas why or what to set so that it shows up there again?

At the bottom of the General listing, you will note the field named Archive - just below the field named Keywords.
In the old days, that Archive field was auto-populated with a date - the date on which the archive for that image was recorded. Thus, if you had only 2 photos in the entire Aperture library, and ran the Update Vault routine yesterday, that field would read yesterday's date for both images. But if today you were to modify image #2 in some way and then update the vault again, the date for image #2 would be today's date - image #1's date would not be changed since the update vault program only saves the 'deltas' - that is, the files that were changed or aded.
And this date fied named Archive found at the very bottom of the General listing of metadata in the inspector no longer displays any date at all. Thus my query.

Similar Messages

  • IPod has erased its data, no longer appears in iTunes/deskto

    I have switched using my iPod from the Windows system I began with to an iBook G4, but did not reset my factory settings because much of the music on the pod does not exist on my old computer.
    I recently was adding files to my iPod on the Mac in iTunes. I disconnected the Pod, and when I tried to listen to the new stuff 10 minutes later, all the files--songs, contacts, podcasts, etc.--had gone missing from the iPod. Now it won't even show up in iTunes or on the computer anywhere but on the system profiler as the other end of the Firewire when connected to the Mac, and no where at all when connected to the old Windows machine. What can I do? Are the songs recoverable? How do I get a computer to recognize the device again??

    It appears from many other posts that the " Keep This iPod in the Source List" function isn't included in iTunes 7 unfortunately. You can leave your feedback on it's absence at this link: Apple Product Feedback
    You can check out a workaround at this link which may help out for now: Create ready-to-sync playlists for Shuffles in iTunes 7

  • .XMP files no longer appear as sidecars--how to clear metadata?

    Photoshop CS2 ver 9.0.2
    Bridge ver 1.0.4.6
    ACR ver 3.7
    eMac G4 800 MHz
    Mac OS X ver 10.4.9
    1 Meg RAM
    12 GB available disk space
    Bridge and Photoshop are set to save metadata in .XMP sidecar files, but sidecar files no longer appear. That is, up till a few days ago, .XMP files appeared when I opened raw files, but no longer. The drop-down menu is still set to save metadata in sidecar files.
    Cannot clear metadata in Bridge. I can select "Camera Raw Defaults" in ACR, but that doesn't clear cropping.
    1) How do I return already-stored metadata to .XMP files?
    2) How do I get PSCS2 to store future metadata as .XMP files?
    3) How do I clear metadata currently stored in ACR/PS database?
    4) What did I do to cause system to store metadata in ACR/PS database despite being set to save in sidecar files?
    Thanks.
    --HC

    Noel,
    Excellent point.  I have no idea.  Maybe this was only working for
    .PSDs/etc. (which contain the metadata embedded in the file itself[,
    right?]).  I may have been deluding myself this whole time.  It's
    possible that it never really worked the way I thought it did to begin with.
    But, more specifically, here's the current question:  If I have this
    file (which is a backup from long ago):
    J:\backup of M90\Documents and Settings\philipt\Application
    Data\Adobe\CameraRaw\Database
    ...assuming that drives are currently mapped (by drive letter) the same
    way they were when that backup was made), can I just replace the current
    file:
    C\Documents and Settings\philipt\Application Data\Adobe\CameraRaw\Database
    ...with the one from J: and expect it to work correctly?
    What's the worst that can happen if I do this?
    BTW, the file on J: is 2,569 Kb; the (new) one on C: is 2,754 Kb.  This
    doesn't seem to bode well, since the old one (J:) should have much, much
    more data in it (assuming that the "Database" file per se is where the
    metadata is stored): the older file has complex,
    multi-tiered data for 10s of 1000s of images.  "??"
    Thanks again for your willingness to help with this!!
    Aloha,
    -pt

  • Updated software on Macbook Air and bootcamp partition disappeared.  Windows boot option no longer appears.  Can I get it back and the data?

    Updated software on Macbook Air and bootcamp partition disappeared.  Windows boot option no longer appears.  Can I get it back and the data?

    Amy, is there a chance they could both be Syncing to another device that has the data erased?
    What are the sizes & modification dates on the files you found?
    Could be many things, we should start with this to be safe, though 2 different ones would seem unlikely to be this problem...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • How do i uninstall a purchased app (that no longer appears in the purchased app list in the store) so that i can repurchase and have the app appear as "purchased" so that i can get updates as the software is updated periodically?

    I am looking for some help with the app store.  I recently purchased an app (aperture) in the app store and subsequently apple refunded the purchase price.  However, the downside of this is that aperture no longer appears as a "purchased" app within my app store account.  Accordingly, i don't believe i will get updates as the software is updated periodically.  Apple has instructed me to delete all my aperture files, reboot and then revisit the app store to re-download and it should let me pay for the app and redownload just as if i had never had the app before.  However, when i go to purchase aperture, i get a warning that it has already been purchased and that i can re-download for free.  That sounds great but again it won't appear in the "purchased" list in the app store b/c of the original refund from apple.  I never thought i would have this much trouble trying to pay someone for a product! 
    Questions:
    Is the app store looking to my hard drive for traces of aperture to determine whether it has been purchased or is it looking at some kind of purchase history within the app store?
    Is there anyway to wipe my hard drive clean of aperture files or wipe clean my app store purchase history so that i can start over?
    If none of this is possible, does anyone have a possible solution?
    If i were to redownload aperture (currently for free since it won't let me pay) when a subsequent update comes out (say it goes from version 3.2.2 to 3.2.3) can i then elect to buy aperture, pay the fee and will it appear as a purchased app and allow me to get upgrades going forward?  Would any data be compromised with this?
    Many thanks for your help!

    Questions:
    Is the app store looking to my hard drive for traces of aperture to determine whether it has been purchased or is it looking at some kind of purchase history within the app store?
    Is there anyway to wipe my hard drive clean of aperture files or wipe clean my app store purchase history so that i can start over?
    If none of this is possible, does anyone have a possible solution?
    If i were to redownload aperture (currently for free since it won't let me pay) when a subsequent update comes out (say it goes from version 3.2.2 to 3.2.3) can i then elect to buy aperture, pay the fee and will it appear as a purchased app and allow me to get upgrades going forward?  Would any data be compromised with this?
    1. Do you have a backup connected to your Mac that contains the app? If so, yes the MAS can detect that and believes that the app is installed.
    2. If the app no longer appears in the purchase history on the Purchased pane in the MAS, then it would seem that Apple has taken care of that.
    4. Updates, such as you describe are free. Upgrades are not. An upgrade is a new paid version of the app, such as v 3.0 to v 4.0.

  • In the iPhone maps app, the favorite selection no longer appears on my iPhone 6 with iOS 8.1.2

    I recently noticed that the "favorites" selection no longer appears when I tap the search bar in iPhone 6 maps.  I need to enter the address every time.  It seems like the address is stored, just no longer visible as a selection.  Recent places also are no longer visible.  I believe this was working before the upgrade to 8.1.2.  Any suggestions?

    Try saving some of your recent places into Favorites to see if that will then appear in that page. You could also try resetting your phone as described below:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
    Did you set up your phone as a new user, or did you load a backup file?

  • My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

    I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
    The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
    It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
    Acrobat did an update the ability to connect to files in the Workspace has been removed.
    Is there any way to reconnect the file back to the Tracker?
    Has anyone else had the same problem?
    Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

    First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
    enjoy free web..... :)
    regards,
    Gautam sharma.

  • My apple tv gen 1 no longer appears in Devices on itunes.  Any ideas?

    My apple tv gen 1 will longer appears in Devices in itunes and therefore can't synch.  Any ideas?  My ATV1 software is up to date, it connects to the Internet, my laptop iTunes is 11.1.3.8, connects to the internet.  Both connect my WiFi.  Since it stopped showing up in Devices, I reset my Apple TV 1 to original factory settings and updated its software.  Still does not appear.  I tried different laptops, all with the 11.1 version of iTunes.  Any suggestions?

    Welcome to the Apple community cdmlbca.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
    I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
    You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
    Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

  • 1st Generation Apple TV No Longer Appears as Device

    Since the latest iTunes update, my Apple TV no longer appears as a device in iTunes on my Mac Pro even though it does on my MacBook despite both are completely up to date and are running on the same network (AirPort Extreme Dual Band) with EXACTLY the same network and firewall settings.
    I have wiped and reinstalled the Apple TV SW and iTunes on the Mac to no avail. Since the Mac I use to host my Apple TV content is on my Mac Pro this is a problem.

    I'm in the same boat.  My Mac Pro iTunes does not show my AppleTV (1st Gen) in the devices, nor is there an AppleTV icon in the Preferences anymore.  Here's the wierd thing... My MacBook Pro, on the same network, and same iTunes version, shows the AppleTV in Preferences.  But not in devices because it is "tied" to my Mac Pro's iTunes.
    Curious oddity....
    Tom

  • LR 5 my external hard drive no longer appears as a hard drive but as a folder under "Volumes"

    I am running LR 5 on a MacBook pro and my external hard drive no longer appears as a hard drive but as a folder under "Volumes". will this affect my ability to search and store in this external hard drive?  How can I get it back to normal?

    I just started having the same problem, oddly enough with a LaCie 500GB D2 Quadra external. Had it connected via FW800 then suddenly it won't appear in the Finder.
    It shows up as an "Unknown Device" in the System Profiler under the FireWire Bus.
    I do need the data on it so which solution is easier?
    Replace the housing? Or am I better off calling LaCie and using the warrenty?
    Thanks,
    Shannon

  • Unable to access Archived data with an ABAP Query

    I have an ABAP Query that uses Logical Database KDF (Vendor) for reporting.
    KDF is Archive Enabled and I can access archived document via SAP standard programs that used the KDF Logical Database.
    the query appears accessing the data but nothing shows on the report.
    Has anyone successfully written and ABAP query and included access to the Archived data?
    Any help is appreciated.

    Hi Gena,
    I'm facing exactly the same problem as you...
    Since this post is an old one, I imagine that you may not remember, but I have to try...
    Have you solved it? If yes, could you please tell me how?
    I've tried to use CL_ABAP_GZIP and CL_ABAP_UNGZIP_BINARY_STREAM and I'm getting the same error 30 at the  IctDecompressStream function.
    Tks in advance,
    Flavio.

  • Some notes no longer appear under Reminders Notes in Mail

    On upgrading to Snow Leopard it appears that around 50% of my notes no longer appear under the Reminders>Notes heading in the Mail sidebar.
    I keep various notes in other folders – such as passwords/login details in their own specific folder – but in Mail on OS X 10.5 notes, regardless of where I'd moved them to, would all also appear in the Reminders>Notes section.
    In 10.6 this no longer seems to be the case. Is anyone else also experiencing this? Is this change intentional? is it a bug? or is there a preference I have not been able to find to control this behavior?

    Reese,
    do you have LabVIEW installed on a network drive or is your LabVIEW Data folder write protected or is your LabVIEW data folder on a network drive?
    I can't think of another reason why the icon editor doesn't show any glyphs/templates.
    However, I have attached two zip files. One contains the glyphs and the other one the templates that are installed by default.
    If you go ahead and unzip those to
    C:\Documents and Settings\*** FILL IN YOUR WORKSPACE HERE ***\My Documents\LabVIEW Data
    (Unzipping both should result in two new folders withint the LabVIEW Data folder. One is called Glyphs and the other one Icon Templates
    you will see the glyphs and the templates the next time the icon editor is launched.
    Sorry for the inconvenience.
    Pls let me know if that works for you.
    Thanks,
    Tom
    http://www.newgistics.com
    Attachments:
    Glyphs.zip ‏407 KB
    Icon Templates.zip ‏2 KB

  • Hyperlinks no longer appear in PDF

    Hello, I routinely produce crossreferences and links in FrameMaker 9, which become hyperlinks when I pdf them. Suddenly, when I pdf my Frame document, hyperlinks no longer appear. Instead, when i click on the link in the PDF, a blinking cursor displays. I must have inadvertently changed some setting, but I can't figure out how to change it back. Please help.

    In FrameMaker -
    Format > Document > PDF Setup
    In the PDF Setup dialog, view the Links tab.
    Select the "Create Named Destinations for All ...."
    Click Set button.
    Save the file.
    This is sufficient if you now select File > Save as PDF.
    Also, for an individual file being printed to a *.ps file that is to be picked up by Distiller for processing to PDF, select File > Print.
    In the Print Document dialog ensure "Generate Acrobat Data" is selected.
    For a Book file, File > Print Book
    In the Print Book dialog ensure "Generate Acrobat Data" is selected.
    For the FrameMaker General Discussion Forum:
    http://forums.adobe.com/community/framemaker/framemaker_general_discussion?view=discussion s&start=0
    Be well....

  • Since i upgraded to Yosemite, when importing photos to iPhoto, they no longer appear in the 'events' summary in library. Why is this and how can i amend?

    Since i upgraded to Yosemite, when importing photos to iPhoto, they no longer appear in the 'events' summary in library. Why is this and how can i amend?

    The events may be incorrectly sorted. Try to sort the events by date, while in "Events" view.
    Go to the "View" menu: Sort Photos > By Date > Descending. That should bring the most recent events to the top of the list.

Maybe you are looking for