Archive DB mounts but can't access the data on the mailbox

Question

Hello,
We had a dirty shut down.
We tried the standard repair with mseutil but ended up having to use /p
One archive mailbox does open but the other does not.
We tried to repair that mailbox
New-MailboxRepairRequest –mailbox usermailbox –corruptiontype provisionedfolder,searchfolder,aggregatecounts,folderview -archive
We get an error MapiExceptionJetErrorIndexNotFound "unable to synchronize manifest"
We tried to move the mailbox to a new database but it fails (move only the archive mailbox)
We've tried skip the mailbox and skip 1000 messages on the move
New-MoveRequest -ArchiveTargetDatabase 'archivenew' -baditemlimit '1111' -archiveonly - acceptlaragedataloss
8103-969ae4e7acf5) failed.
Error code: -2147467259
MapiExceptionJetErrorIndexNotFound: Unable to synchronize manifest. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=239]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=503][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropIncrCfg [112]
    Lid: 27962   ROP: ropUpldStStrmBegin [117]
    Lid: 27962   ROP: ropUpldStStrmEnd [119]
    Lid: 27962   ROP: ropUpldStStrmBegin [117]
    Lid: 27962   ROP: ropUpldStStrmEnd [119]
    Lid: 27962   ROP: ropUpldStStrmBegin [117]
    Lid: 27962   ROP: ropUpldStStrmEnd [119]
    Lid: 27962   ROP: ropUpldStStrmBegin [117]
    Lid: 27962   ROP: ropUpldStStrmEnd [119]
    Lid: 27962   ROP: ropFXSrcGetBufferEx [156]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 23137 
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 3245    StoreEc: 0xFFFFF9BF
    Lid: 3245    StoreEc: 0xFFFFF9BF
    Lid: 52413   dwParam: 0x30040
    Lid: 8916    StoreEc: 0xFFFFFAE7
    Lid: 54507   dwParam: 0x8
    Lid: 15243   StoreEc: 0xFFFFFAE7
    Lid: 62699   dwParam: 0x8
    Lid: 39415   dwParam: 0x95E1D
    Lid: 12427   StoreEc: 0xFFFFFAE7
    Lid: 46315   dwParam: 0x8
    Lid: 15348   StoreEc: 0xFFFFFA84
    Lid: 40745   StoreEc: 0xFFFFFA84
    Lid: 44841   StoreEc: 0xFFFFFA84
    Lid: 38697   StoreEc: 0xFFFFFA84
    Lid: 50093   StoreEc: 0xFFFFFA84
    Lid: 47457 
    Lid: 10213   StoreEc: 0xFFFFFA84
    Lid: 28256 
    Lid: 9189    StoreEc: 0xFFFFFA84
    Lid: 22500 
    Lid: 25058   StoreEc: 0xFFFFFA84
    Lid: 22844 
    Lid: 3742    StoreEc: 0xFFFFFA84
    Lid: 23296 
    Lid: 2526    StoreEc: 0xFFFFFA84
    Lid: 20912 
    Lid: 24504   StoreEc: 0xFFFFFA84
    Lid: 24148   StoreEc: 0xFFFFFA84
    Lid: 23796 
    Lid: 2478    StoreEc: 0xFFFFFA84
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849 
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 32758 
    Lid: 16586   StoreEc: 0xFFFFFA84
    Lid: 22518 
    Lid: 28874   StoreEc: 0xFFFFFA84
    Lid: 29516 
    Lid: 31820   StoreEc: 0xFFFFFA84
Context:
Operation: ISourceFolder.EnumerateChanges
OperationSide: Source
Archive (ad0ef3fd-89cc-418f-8f82-f368a2269299)
Catchup: True
Root folder: entryId [len=46, data=000000002165B2FF1E9D624EAF289D8E40FDF08C010073ECDEDC243916448926100E762B5DE3000000095E1D0000

Answer 1

So a couple of things;
1. Did you keep a copy of the non-repaired database?
2. Eseutil /P removes entire pages of data as it finds errors which means that depending upon which pages are removed it can effect bot good and bad data
3. After the /P your should definitely do an eseutil /D to defragment the DB as its best practice to do so after doing a /P and it should clean up the remaining issue
4. If the /D doesn't do the trick then the only other option would be to
A: Restore the archive DB from backup via RDB and recover the data
B: Try out our DigiScope tool to open an offline copy of the EDB before the /P was run.  If accessible then I would remove the production archive DB, recreate it and use DS to recover from the offline archive DB to the recreated 
production archive mailbox
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope