Archive, draft, sent being directed to server instead of local

I'm using an exchange 2010 server as an imap server. I recently had to delete my account from thunderbird and recreate it. My problem is that even though I specify copies be sent to the "sent" folder on local, archives to "archives" on local, etc. Thunderbird keeps sending them to the right folder, but on my imap (i.e. exchange) server. The previous version of the account did not have this problem, only happened after I deleted and re-created it, which is looking more and more like a bad idea ;)
Any help most appreciated.

OK, I figured it out. I had created several identities to minimize extra copies on replies - e.g. first.last, last,first, etc. Turns out each identity has a "copies and folders" section of it's own. I changed all of them to what I want and all is OK>
''gmhyman [[#question-1037036|said]]''
<blockquote>
I'm using an exchange 2010 server as an imap server. I recently had to delete my account from thunderbird and recreate it. My problem is that even though I specify copies be sent to the "sent" folder on local, archives to "archives" on local, etc. Thunderbird keeps sending them to the right folder, but on my imap (i.e. exchange) server. The previous version of the account did not have this problem, only happened after I deleted and re-created it, which is looking more and more like a bad idea ;)
Any help most appreciated.
</blockquote>

Similar Messages

  • Servlet call from jsp pages on Hosting server instead of Local system

    HI,
    We have started hoste our projects on one of the Dedicated service from US.
    We have used servlets in our projects and uploaded servlet based project on Dedicated server ,so now we are getting one ERROR ,when we try to access servlet pages from browser .
    sample Below ERROR we are getting on browser ,when we try to access the servlet...
    The requested URL /Globalcontactservlet was not found on this server
    In Web.xml i have written mappings for servlets and i have included web.xml file under the Web-inf folder as same process we do on local system server.(Tomcat 5.5)
    on browser i am trying to use the below format to request the servlet mapping
    <form method="POST" action="http://www.xyz.com/Globalcontactservlet" >
    </form>

    You can download Oracle's latest JDBC drivers from: http://otn.oracle.com/software/content.html
    You need to register, but it should be free.
    When you get the zip/jar-file, you have several options. You can either place it in the common classpath of your system/Servlet container (recommended if you use it in most of your webapps), or in the WEB-INF/lib directory of your webapp (if you only use it with that particular one).
    .P.

  • I have an iPhone and use Roadrunner as my email server. When I open RR it gives me 4 choices, inbox, drafts, sent and trash.  I would like to add saved, how can I do this.  I contacted RR and they said it is an Apple problem to solve.

    I have an iPhone and use Roadrunner as my email server. When I open RR it gives me 4 choices, inbox, drafts, sent and trash.  I would like to add saved, how can I do this.  I contacted RR and they said it is an Apple problem to solve.

    Roadrunner is POP email, and the feature you are looking for
    is a function of IMAP email. Roadrunner has not announced
    any plans to make IMAP available. If this is important to you,
    get a gmail account (which can be setup as IMAP)  and configure
    your Roadrunner account to automatically forward emails to the
    gmail account.

  • If I do NOT store my sent messages on IMAP server, where are they?

    My hosting service warned me that I am taking up too much space with my Sent messages being stored on the IMAP server.  If I uncheck the box to store Sent messages on the server in my account preferences, then where do I find my sent messages?  All of the folders listed alongside the sidebar seem to be linked directly to the IMAP account.  I can't find my sent messages anymore.
    They aren't gone though.  If I check the box again, the messages show up again.  So my question is how do I not store them on the server but still store and be able to see them on my computer?
    Thanks
    Bob

    That is a solution if I want to do a one-time move of my sent messages to another folder and then leave things as-is.  But once I stop storing the sent messages on the server, how do I access new sent messages after that?  The folder is not visible anywhere, from what I can tell.

  • Using SQL server instead of Olite in Oracle BPEL

    I am now trying to use SQL 2000 server instead of Olite in Oracle BPEL. I couldn't find any instruction or admin config guide. Has anyone had any luck with this?
    If anyone has any experience, please shed some light on this.
    I am now able to get "domain_sqlserver" dll file populated into SQL server.
    How di i configure BPEL to use SQL db instead of Olite? Do i need to set up database connections to work?
    Thank you very much in advance.

    Edwin,
    Thank you so much for the info.
    I have emailed to [email protected] for the question.
    Up to now, i have done the followings:
    1. I have successfully populated domain_sqlserver ito SQL 2000 with some modification.
    2. I have also configured data-sources.xml under ..\integration\orabel\system\services\install\config and unser ..\integration\orabel\system\appserver\oc4j\j2ee\home\config to use MSFT SQL 2000 instead of Olite.
    3. I have also commented out running kill_Olite.bat and start_olite.bat, and start SQL 2000 server.
    4. Installed Data Direct JDBC driver
    Could you please kindly point me what are the rest of configuration required in order to make it work?
    Thank you so much.

  • Direct Access Server 2012 R2 Single NIC DNS problem with 8.1 Enterprise

    Dear helpers,
    I am beginning to rip my hair over the following problem and I am asking for some guidance:
    I have setup DA on a server 2012 R2 with the simple wizard using one NIC. I have opened up port 443 to my  DA Server and operations status is showing green on everything. I have used Djoin to join a remote win 8.1 enterprise client to our domain and
    setup DA. I can see that my tunnel is established and the client shows up as an IPHTTPS client on my server:
    Role                       : client
    URL                        : https://vpn.ourdomain.com:443/IPHTTPS
    Last Error Code            : 0x0
    Interface Status           : IPHTTPS interface active
    Connection status on client is stuck in connecting and the eventlog on client gives me following error:
    The system failed to register host (A or AAAA) resource records (RRs) for network adapter
    with settings:
               Adapter Name : {424F50B4-BF1A-4D96-81FA-7D7436A99F07}
               Host Name : TEST
               Primary Domain Suffix : ourdomain.com
               DNS server list :
                     172.16.8.1
               Sent update to server : <?>
               IP Address(es) :
                 172.16.8.110
    The reason the system could not register these RRs was because the update request it sent to the DNS server timed out. The most likely cause of this is that the DNS server authoritative for the name it was attempting to register or update is not running at
    this time.
    I understand why this is failing because it seems like it is contacting the local DNS to register and that's wrong.
    Get-DaConnectionStatus gives me the following:
    Status    : Error
    Substatus : CouldNotContactDirectAccessServer
    I can ping the name on the DA server and also the IPv6 address, I can also do nslookup if i set the server used to my internal DNS-servers IPv6 address(DNS and DA server = same machine). My DA Client GPO is being applied to the client and i get an NRPT table
    looking as follows:
    Settings for DirectAccess-NLS.ourdomain.com
    DirectAccess (Certification Authority)  :
    DirectAccess (IPsec)                    : disabled
    DirectAccess (DNS Servers)              :
    DirectAccess (Proxy Settings)           : Use default browser settings
    Settings for vpn.ourdomain.com
    DirectAccess (Certification Authority)  :
    DirectAccess (IPsec)                    : disabled
    DirectAccess (DNS Servers)              :
    DirectAccess (Proxy Settings)           : Use default browser settings
    Settings for .ourdomain.com
    DirectAccess (Certification Authority)  :
    DirectAccess (IPsec)                    : disabled
    DirectAccess (DNS Servers)              : fd1f:6801:cc14:3333::1
    DirectAccess (Proxy Settings)           : Bypass proxy
    I cannot reach any internal resources by name or IPv4 address except the DA server.
    I will gladly provide more info if needed
    Please help!
    //Cris

    Hi,
    Thanks for your reply.
    Firstly, computer certificates are necessary for DirectAccess.
    In addition, it is no need to assign an IPv6 address on all the servers. In Windows server 2012/R2, the
    Built-in NAT64 and DNS64 support for accessing IPv4-only resources.
    If you select Configure DirectAccess Clients with DNS client suffix search list and add additional suffixes to the list,
    you can search for short, unqualified computer names in more than one specified DNS domain.
    For more detailed information about DNS suffix search list, please refer to the link below:
    Step 2: Configure the DirectAccess Server
    Best regards,
    Susie

  • "Sent Messages" folder not receiving new sent mails after a server change

    My provider just moved my account to another server. The IMAP accounts needed to be re-established on my wife's PC in her program. So we know the files are all there on the new server.
    Funny thing is that it's not working on Mail on my iBook. And when these changes took place, my sidebar contents in Mail changed on me. I have sent some mail to various places since this happened, but none of these new mails have copies which are saved in my "Sent Items" or "Sent Messages" folders. So I have no record now of anything new since the change happened. I DO have copies of mail in there that are pre-change.
    I checked my preferences for mailbox behaviors, and the "Store Sent Items on the Server" is checked, so I'm not sure what's up.
    For the record I'm running OS X 10.4.7 and Mail 2.1.
    I have deleted and re-established my two email accounts in Mail in order to make them re-establish new links with the server, so I'm seeing my folders, but no new mail sent is showing up in my Sent Messages folder.
    I would appreciate if anyone knows if there could be an issue with Mail, my new host's servers, or what. It looks like a Mail issue to me, since my wife's PC is reading everything fine (and she is running Thunderbird as her client).
    Thanks!
    iBook G4   Mac OS X (10.4.7)  
    iBook G4   Mac OS X (10.4.6)  
    iBook G4   Mac OS X (10.4.7)  

    You're welcome.
    I don't think it's your fault. Different IMAP servers use different naming conventions, and the Mailbox > Use This Mailbox For command is meant to let you tell Mail which folder should be used for what purpose, but you shouldn't have to use it just to prevent your mail from being lost. At the very least, Mail should be able to use its own default Sent Messages folder without you having to do anything. I don't know why Mail fails to do this properly so often.
    Worse yet, not only does Mail sometimes fail to use the Sent Messages folder that's already there, but it doesn't even warn you that it's failing to save your sent messages as you've told it to.

  • Direct access server reporting NAT64 Translation failure

    We are seeing strange issue , Direct Access server 2012 is reporting NAT64 warning.
    I am trying to isolate causing could not find any useful information.
    DA server is behind firewall having Ipv4 internal address.
    Error I see on dash board is
    NAT64 translation failures might be preventing remote clients from accessing IPv4-only servers in the corporate network.
    Any help appreciated.

    NAT64 is an internal component of DirectAccess and there really isn't anything that you configure manually for it. Seeing a message about NAT64 having trouble is more than likely being caused by some kind of external influence on that server. For example,
    many of the quirky error messages or problems that we see during DirectAccess implementations are caused by security policies being present in the domain. For example, if you plug in a new server to use as your DA server, if you do not block inheritance in
    Group Policy, as soon as you join that new server to your domain it may receive settings from existing GPOs in your network. Sometimes those GPOs conflict with the things that DirectAccess needs, and they have therefore broken DA before you even set it up.
    If you are setting this up as a new DA server, I recommend removing the Remote Access role, blocking inheritance in Group Policy so that none of your preexisting GPOs get applied to it, and starting the configuration again.

  • Edit files directly on server

    I have been working with dreamweaver for years now, and I feel that either i'm missing something, or Adobe is missing a very atrractive feature. I think I'll illustrate this through an example.
    With Microsift Visual Web Developer, a program which I extremely dislike has an add a site feature. When you do this, you enter all of the FTP information and so on, from here, when you create/open a web document it opens it directly from the server (not from a folder where you have a complete copy of the site on your computer). When I click save (ctrl+S) it saves it directly to the server via FTP. Can I accomplish this in Dreamweaver? I work with PHP files a lot, along with WordPress, and I'd rather make minor CSS changes "on the fly" hit the hotkeys for save, and see the changes without having to select "put" or sync the site.
    Thanks for your support
    Zach

    Murray, here's my dilemma:
    I do most of my work on a computer that is locally networked to the server that hosts the files so I do not need FTP or any other out of network access to the files when using this computer.
    Sometimes I do need to access the files from my laptop, remotely via FTP.
    If I setup the locally networked computer so the server folder is my Dreamweaver local folder and I do not set up a remote server or remote folder, it works and I’m able to search/replace but then when I preview in a browser, it previews using the local path (e.g.; \\server\website\root\) instead of the sites URL so dynamic content does not show. I would like for Dreamweaver to use the URL instead of the path. The only way I can get it to do that is by setting up a remote server and selecting ‘Local/Network’ under the ‘Connect Using:’ settings. Then I specify the same folder as I did for the local site. I guess it’s working but I have gotten write errors before.
    If I use my laptop to access remotely, I would like the ability to use the search/replace function but I guess the only way to do that is to have a local site on the laptop?
    So please tell me exactly how does RDS differ from FTP?
    What do I put in each of the input boxes? The tiles differ from the FTP boxes.

  • Using Browser Listener on the server instead of the client

    Hello everyone,
    Anyone can help me ? I would like to know how can I use the Browser Listener on the server instead of using on the client ?
    I have Oracle Warehouse Builder 10g Release 2 (10.2.0.2). SO: Windows2003 (32-bits).
    Thanks in advance,
    Paulo Almeida

    Hi Paulo,
    very easy. You start the OC4J on the server (unix or windows; for unix there is no icon but a shell script, look it up in the installation manual). If you start it as a background process or as a Windows service you don't need an open user session. In the browser you edit the browser listener URL replacing 127.0.0.1 with the name or the IP address of the server (http://<hostname>:8999/owbb/RABLogin.uix). Unfortunately, you cannot achieve this directly from the OWB console (a configuration parameter to set an alternative hostname would be a nice enhancement) but you can bookmark this in your browser.
    Warning: In some (or in all) 64bit releases the OC4J is missing; Oracle Support could not justify this.
    Regards
    Thomas

  • Received redemption code for Server instead of Mountain Lion

    I was one of the lucky ones who got a redemption code which had already been used.
    I waited patiently for a new code and just received it. Unfortunately, they sent out a redemption code for OS X Server instead of Mountain Lion.
    When I redeemed the code, I got the message that I couldn't donwload the product because it requires OS 10.8. So now I'm stuck with software I don't need and can't get the software I want.
    I think that Apple iTunes fulfillment group is in a rush and people are making sloppy mistakes.

    I just got a new code for Mountain Lion. Oddly enough, I still have OS X server listed in my purchases. I think it's an evil plot to get me to buy a Mac mini.

  • I have an iMac running Yosemite 10.10.1 & Outlook 2011 for Mac.  For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there.  How can I move them to a sent box on my server so I can see them on other devices?

    I have an iMac 3.2 GHz Intel Core i5 with 16 GB memory and 1.12 TB storage running Yosemite 10.10.1 & Outlook 2011 for Mac.  For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there.  I have attempted to move those sent emails from the iMac to my email server (IMAP), but without success.  Is there a way to move them to a sent box on my server so I can see them on other devices?  Many thanks for any help you can provide.

    Go to: Apple > System Preferences > Universal Access and in the Seeing tab make sure that the Display Enhance contrast: is set to Normal.
    Alternatly, try holding the  ⌃⌥⌘ (control command alt) keys and then pressing the , (comma) key a few times.

  • When I try to go to a a game on facebook and try to turn off security, I says that the page is being directed in such a way that it would not complete. This is constant. Can you help me?

    When I log into facebook it takes me to the https version and not http. the https version is secure and when you play a game it will ask if you want to termporarily turn the secure feature off. When I do I consistantly get a message that says they (I don't know if it is you or facebook, but it's a firefox message) cannot do this as it was being directed in such a manner that it would not complete. I have to go back to the main facebook page and redo whatever many times before it will do it correctly. Once I get into the http end, as long as I do not log off facebook, I won't have the issue. But, if I logout of facebook, I have to go through the process repeatedly. I wish I could get my acct back to http and not https, but facebook's help is useless.

    This issue can be caused by corrupted cookies.
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Cookies
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://kb.mozillazine.org/Cookies

  • Will RMAN delete archive log files on a Standby server?

    Environment:
    Oracle 11.2.0.3 EE on Solaris 10.5
    I am currently NOT using an RMAN repository (coming soon).
    I have a Primary database sending log files to a Standby.
    My Retention Policy is set to 'RECOVERY WINDOW OF 8 DAYS'.
    Question: Will RMAN delete the archive log files on the Standby server after they become obsolete based on the Retention Policy or do I need to remove them manually via O/S command?
    Does the fact that I'm NOT using an RMAN Repository at the moment make a difference?
    Couldn't find the answer in the docs.
    Thanks very much!!
    -gary

    Hello again Gary;
    Sorry for the delay.
    Why is what you suggested better?
    No, its not better, but I prefer to manage the archive. This method works, period.
    Does that fact (running a backup every 4 hours) make my archivelog deletion policy irrelevant?
    No. The policy is important.
    Having the Primary set to :
    CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBYBut set to "NONE" on the Standby.
    Means the worst thing that can happen is RMAN will bark when you try to delete something. ( this is a good thing )
    How do I prevent the archive backup process from backing up an archive log file before it gets shipped to the standby?
    Should be a non-issue, the archive does not move, the REDO is transported and applied. There's SQL to monitor both ( Transport and Apply )
    For Data Guard I would consider getting a copy of
    "Oracle Data Guard 11g Handbook" - Larry Carpenter (AKA Dr. Paranoid ) ISBN 978-0-07-162111-2
    Best Oracle book I've read in 10 years. Covers a ton of ground clearly.
    Also Data Guard forum here :
    Data Guard
    Best Regards
    mseberg
    Edited by: mseberg on Apr 10, 2012 4:39 PM

  • How do I open a draft sent from a computer to my IPAD?

    I tapped on the draft sent to my IPAD, but it won't open.

    Once you copy the Domain.sties file from your friend's computer to yours consider the following:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

Maybe you are looking for