Archive file cannot be opened for write program

Hi All,
I am getting the error message "annot be opened for write program" in log view, when I am trying to write data into archive file using "write' function.
Please provide us the solution for this problem.

Hello,
It must be due to missing authorization for the write operation.
Please inform the security consultant along with SU53 details.
Regards
Vijay Gajavalli

Similar Messages

  • Project Standard 2013 'The File Cannot be Opened'

    I am using Project Standard 2013 and have been doing so since 2013. Last week it suddenly started coming up with the following error message when I try to save a project and update the associated shared resource pool:
    The file cannot be opened.
    Check that the file name and path are correct
    Check that the file format is recognized by Project
    Project files saved in a version earlier than Microsoft Project 2000 can't be opened.'
    I have only ever used this version, no earlier versions. I have tried to repair the application through the update/re-install process. 
    The projects save but do not appear in the resource pool unless both files are open. Some projects are still linked to the resource pool and show in it even if they are not open. This is now happening with all files when I try to save them. Sometimes it
    says:
    'The resource pool is read only, do you want to save a copy'
    Even if I click 'no' a copy appears which I can't close and I have to force quit the application.
    Help.

    I've also tried opening the resource pool read-write. That worked for about 5 minutes when saving projects. Now it won't let me save my project without saving the resource pool first. When I try to save the resource pool, I get the same error message:
    The file cannot be opened.
    Check that the file name and path are correct
    Check that the file format is recognized by Project
    Project files saved in a version earlier than Microsoft Project
    2000 can't be opened.'
    Wendy

  • RSEINB00 - Getting Error File cannot be Open - 1st Rec isn't IDOC contr rec

    Hi,
    I am trying to execute the Standard program for inbound IDoc Processing RSEINB00.
    A flat file has been placed in the application server.
    I have confirgured the port details for executing this program.
    the program giving an exception that  file cannot be opened.
    When I went into the program and tried to find out the Error number it is Saying " File cannot be opened as the first record in the file is not an IDoc control record".
    Can anybody suggest me what will be the structure or format of the IDoc Control record to execute this Program.
    Can any body please provide me a sample file to execute this program.
    please through some light for this requireme

    Hi gaurav,
    thanks for you reply.
    Can you give an example
    thanks & regards

  • I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

    I'm using Numbers version 3.2.2.
    Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
    The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

    Also, I tried to open it through an older version of Numbers but it sent this error message.

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • Publisher - pdf - "This file cannot be opened because it has no pages"

    Hi,
    I have a Publisher report which works fine as a single page when generated to pdf.
    I change the data model to give me multiple pages and insert the entire report content into a repeating frame which correlates with the header data that is definitely present for all records. ceteris parabus.
    I preview this in interactive mode - everything works okay.
    I preview this in pdf and I get the error; - "This file cannot be opened because it has no pages"
    This is on well formed XML with a very modest data set.
    Anyone have a fix or a pointer for this please??
    thanks,
    Robert.

    Known bug.
    8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK

  • File cannot be opened because there are no pages - Reader 9 & X

    I have an old hydro bill in PDF format from 2000.  I can open this PDF in Adobe Reader 8 and earlier with no issues whatsoever (i.e. double-clicking the PDF in Windows Explorer).  The problem started with Adobe 9 & continues with Adobe X.  When I double-click the file, Adobe opens but tells me the "File cannot be opened because there are no pages."  More recent hydro bill PDFs can be opened with no issue.
    Googled & searched the forums but haven't found any earlier reference to this particular error though there is a vague recollection that someone complained somewhere about this or something similar with Adobe 9 some months ago but there was no solution to be found then.
    Using Windows Vista Ultimate here & have uninstalled Reader X & returned to Reader 8 pending a solution.
    Does anybody know how to fix this?
    Thanks.

    Thanks for the idea.  Disappointing if true.
    Thing is... it's an old hydro bill... I'm just keeping it for posterity's sake (a bill from when I was paying for nuclear power!?!)
    Most troubling and disconcerting.
    So, who should be sued?  Adobe?  My hydro company?  ;-)   Just kidding.
    Anyway... some time gone by...
    - re-installed Adobe X
    - as per ghostscript.com, downloaded Ghostscript v9.01 & Gsview v4.9 (McAfee okayed them)
    - installed Ghostscript & Gsview
    - started Gsview
    - dragged & dropped one of the offending hydro bill PDFs from Windows Explorer into Gsview
    - from File menu picked Convert
    - for Device pdfwrite, upped Resolution from the default 600 to 720
    - via the Properties button in the Convert dialogue, adjusted CompatibiliyLevel to 1.2, clicked OK in Properties dialogue
    - clicked OK again back in the Convert dialogue
    - in the Output Filename dialogue, made the new file a "b" copy of the original filename
    - clicked Save
    The new file is a tenth the size of the old one & opens without incident in Adobe X.  Ghostscript works well... thanks.
    But... is this really the optimal solution for businesses & governments?  It's not as if the old files were on vellum and here we are like old monks, transcribing for the king.  Good grief where are we going?

  • Setting file type to open in WebStart Program (Opened file as parameter)

    Hi --
    I've created a Java program & installed in on my PC using Web Start. Now I'd like set all .sit files to automatically open in my program. My program expects a file as input, and I'd like the opened .sit file to be that parameter.
    I've tested this using a batch file to run the program (instead of Web Start), and that worked fine. I'm not able to get this to work with a Web Start program, though.
    I opened My Computer & went to Tools / Folder Options / File Types. I created an SIT extention, and I tried a number of things:
    1. I had Web Start place a shortcut on the desktop, and then I selected that shortcut from the list in the File Types window --> I got a "TooManyArgumentsException" when I double-clicked on the .sit file.
    2. I tried to set the File Types setting to http://myserver/myapp.jnlp. --> Windows recognized that this wasn't an executable & wouldn't let me save it.
    3. I created a shortcut to http://myserver/myapp.jnlp and pointed the File Types setting to that. --> Windows wouldn't let me save that.
    4. I clicked the Advanced button on the File Types tab, and created an open action. I tried the same three things there & got the same results.
    Is it possible to do what I'm trying to do (force .sit files to open in my Java Web Start program and send their filename into the program's main method as a parameter)? Does anyone have any pointers?
    Thanks,
    Bonnie

    This is a new feature in Java Web Start 1.5, and in the 1.5 version of the JNLP specification.
    The <association> tag in the jnlp file can be used to ask Web Start to create the fextension/mime-type asociation for ".sit" extensions so that if you click on a ".sit" file, the system will launch "javaws -open clickedfile.sit yourapp.jnlp" see:
    http://jcp.org/aboutJava/communityprocess/maintenance/jsr056/jnlp_spec.html#4756982
    http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#information
    /Dietz

  • File cannot be opened because there are problem with the files

    Hi
    My program reads the data from file uploaded into SharePoint 2010 and massage with the list information. It finally creates a new document and prompt the end user to save it. When user opens the saved document it consecutively prompts with the below two message
    How to turn off this warning messages? When I re-save this document with different name and open it again (any number of times) then the above messages
    stops prompting. I want these messages should not appear even in first time as well. I tried to add these document on trusted location and also removed the protection settings but it does not help. Is there any setting requires to suppress these warning messages? 
    Any help will be greatly appreciated.
    Best Regards,
    Imran

    Hi Imran,
    your document is damaged. Pls try opening new and fresh documents
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/921c57a4-6120-419d-a612-07d4826eebcb/the-file-cannot-be-opened-because-there-are-problems-with-its-contents?forum=word
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Using an AIX archive file as a library for an external procedure.

    I cannot use an archive file, created with the ar command, that contains a shared object that was created with the xlc and ld commands as a library for external procedures. I can use the shared object file created with the ld command as a library for an external procedure. Why would I encounter an invalid magic number and what is the resolution?
    Example:
    oracle:@husk21:/home/oracle> ksh -x ./Oracle_demo.ksh
    + rm shell.o shell.so shell.so.exp shell.so.imp
    + make -f /u01/oracle/product/11.1.0.7/db/rdbms/demo/demo_rdbms32.mk extproc_no_context SHARED_LIBNAME=shell.so OBJS=shell.o
    /u01/oracle/product/11.1.0.7/db/bin/oraxlc -q32 -c -I/u01/oracle/product/11.1.0.7/db/rdbms/demo -I/u01/oracle/product/11.1.0.7/db/rdbms/public -I/u01/oracle/product/11.1.0.7/db/plsql/public -I/u01/oracle/product/11.1.0.7/db/network/public -I/u01/oracle/product/11.1.0.7/db/precomp/public shell.c
    generate_export_list() { /bin/nm -X32_64 -B -h -g "$1" | grep -v ' U ' | awk '{print $3}' | egrep -v '^\.|^TOC' | sort | uniq ; }; generate_import_list() { LIB_NAME=$1; IMP_FILE=$2; cat /u01/oracle/product/11.1.0.7/db/rdbms/lib/xa.imp | head -1 | awk '{print $0, "." }' > ${IMP_FILE}; /bin/nm -X32_64 -C -B -h -g ${LIB_NAME} | grep ' U ' | grep -v "::" | grep -v "(" | grep -v "\.cc" | awk '{print $3}' | sed -e "s/\.//g" | grep -v "^_" >> ${IMP_FILE}; }; generate_import_list shell.o shell.so.imp; generate_export_list shell.o > shell.so.exp; /bin/ld -b32 -bnoentry -bM:SRE -bE:shell.so.exp -bI:shell.so.imp -o shell.so shell.o -L/u01/oracle/product/11.1.0.7/db/lib -lc_r -lm
    ld: 0711-224 WARNING: Duplicate symbol: .system
    ld: 0711-224 WARNING: Duplicate symbol: system
    ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
    oracle:@husk21:/home/oracle> ar rv libshell.a shell.so
    ar: Creating an archive file libshell.a.
    a - shell.so
    oracle:@husk21:/home/oracle> ar tv libshell.a
    rwxr-xr-x 3514/3516 1263 Sep 08 10:00 2009 shell.so
    oracle:@husk21:/home/oracle> file shell.so
    shell.so: executable (RISC System/6000) or object module not stripped
    oracle:@husk21:/home/oracle> file libshell.a
    libshell.a: archive (big format)
    SQL> CREATE OR REPLACE LIBRARY shell_lib is '/home/oracle/libshell.a';
    / 2
    Library created.
    SQL> CREATE OR REPLACE PROCEDURE shell(command IN char)
    AS EXTERNAL
    NAME "shell"
    LIBRARY shell_lib
    LANGUAGE C
    PARAMETERS (command string);
    / 2 3 4 5 6 7
    Procedure created.
    SQL> exec shell('ls');
    BEGIN shell('ls'); END;
    ERROR at line 1:
    ORA-06520: PL/SQL: Error loading external library
    ORA-06522: 0509-022 Cannot load module /home/oracle/libshell.a.
    0509-103 The module has an invalid magic number.
    ORA-06512: at "V500.SHELL", line 1
    ORA-06512: at line 1
    SQL> CREATE OR REPLACE LIBRARY shell_lib is '/home/oracle/shell.so';
    2 /
    Library created.
    SQL> exec shell('ls');
    PL/SQL procedure successfully completed

    Using an AIX archive file as a library for an external procedure.

  • I am on a trial version of  InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6.  Isn't Cloud compatible with CS6 design software?

    I am on a trial version of  InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6.  Isn't Cloud compatible with CS6 design software?

    Industry standard files such as JPEG are compatible with many brands/versions of programs
    Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
    This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word

  • Some PDF files, cannot be opened by Preview version 6.0.1. The system ask me to upgrade the version and direct me to Adobe site

    Some PDF files, cannot be opened by Preview version 6.0.1. The system ask me to upgrade the version and direct me to Adobe site to install Adobe Reader

    Below a link to a file which is an application to canadian visist visa, you can find the link also in the folowing site:
    http://www.cic.gc.ca/english/information/applications/visa.asp.
    I ttried to open the PDF file form Web, and down loaded from web to my Mac, but in both attempts did not work, and I 've beem asked to upgrade to a later Adobe version from the site or from the PDF file.
    Application for Temporary Resident Visa [IMM 5257] (PDF, 338 KB)

  • Numbers file created w new version of Numbers on my mac and then transferred  via Dropbox to my ipad: file cannot be opened by iOS version of Numbers

    Numbers file created w new version of Numbers on my mac and then transferred  via Dropbox to my ipad: file cannot be opened by iOS version of Numbers

    Hi Jocomo,
    That's correct. Dropbox does not handle Numbers 3.0 for Mac and Numbers 2.0 for iOS documents well at all. They will probably fix this.
    But why are you using Dropbox for this?  Numbers has built-in iCloud integration for the very purpose of syncing documents back and forth.  It's much easier than using Dropbox even if Dropbox could handle the new Numbers format.  And it's now quite reliable.
    To enable iCloud with Numbers on your Mac:
    In System Preferences>iCloud make sure you have Documents & Data turned on:
    And after clicking Options, make sure you have checked Numbers.app:
    On your iPad you need to make sure iCloud sync is turned on in TWO places:
      Settings>iCloud>Documents & Data>Numbers
      Settings>Numbers>Use iCloud
    If you have entered the right iCloud credentials on your Mac and iPad, Numbers will then sync back and forth. It's much easier than putting in Dropbox and then having to Open in... , etc.  You can of course still keep backup copies of your documents in Dropbox if you want.
    SG

  • Hi, I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. Any suggestions please?

    Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?

    Hi Colourdoodles,
    Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
    If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
    Regards,
    Ian

  • I am unable to open pdf links using firefox 4 beta 11. Error message is "....ashx file cannot be opened, because an unknown error occurred. Try saving to disk first and then opening file"

    I can open some pdf file in FF beta 11 using Adobe reader, however some links to pdf files cannot be opened. When clicked, the error message above appears. There is no option to open the file, so I have had to switch to Safari to read these pdf file.

    Please install the following add-on to see if it helps.
    https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

Maybe you are looking for

  • Another Game Center with Apple ID problem

    hello everyone, i have read all game center problems but i couldn't fix mine. Here is the problem: I have in my email account ([email protected]) one apple ID, but in this ID there are two different accounts with different names (vs & djvs) in Game C

  • FRM-92101 There was a failure in the forms server during startup

    Hi guys when running EBS i am getting this error: it happens when i try to load any form i.e hrms managemnet --> work structure -> organization error : FRM-92101 There was a failure in the forms server during startup this could happen due to invalid

  • Control Break of Interactive Report

    can we dynamically change column of Control Break in Interactive Report ?

  • Tomboy, do not open properly... just from console

    Hi! I have installed tomboy http://www.gnome.org/projects/tomboy/ using pacman... But the problem is that the only way to open it is from console... the button on kde just do nothing... how can I see wich is happening when I hit the button? because t

  • Oracle forms 6i compatibility with 11g

    Hi, We are in the process of migrating our Oracle to version 11g, due to a product upgrade. The current system is on Oracle 9i and holds Oracle forms developed on Oracle 6i, will this form still be usable on Oracle 11g after upgrade? or do we also ne