Archive icon is not seen in fcx 10.1.1

Hi, i have noticed that if create an archive of any drive or card connected, fcx 10.1.1 cannot see it when trying to import, do I miss something? 10.0.9 works perfectly.

In previous versions archives had to be in specific locations. Now they can be anywhere. You just have to find the archive in the import window and open it.

Similar Messages

I have ipad3 and airplay icon is not seen

I have an ipad3 andi can;'t seem to find the airplay icon in the control center. When i play hte you tube that time also i cant see it.

In my iPad3, I can see the airplay icon at home where I have an Apple TV and AirPlay enabled speakers. It is in the control panel that comes up by swiping upwards from the bottom of the iPad.
However, at work where there are no airplay enabled devices, the airplay icon is not visible and the space it normally occupies in the control panel is blank. Therefore, I believe the iPad has to receive the signal from an airplay device in order for the airplay icon to be visible in the control panel.
I hope this helps.

PAYROLL ARCHIVE PROCESS CAN NOT SEEN ON THE REQUEST SET FOR SUBMIT

Dear all
kindly please i need your help.
i was on the payroll process running.
i have run payroll run--->PrePayment--->Payroll Archiver not found.
Kindly please suggest any......what should i done.

It's not possible with this setup. You have connected the E3000 LAN-LAN. With this setup you cannot set a gateway address on the E3000. Thus all it knows about is the connected LAN. Nothing else. You cannot access the E3000 from anywhere but your LAN subnet 192.168.0.*.

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

Archived delivery's stock seen in MMBE and not in LS24

Hi All,
In MMBE stock for an archived delivery is seen, it is not seen in LS24. In fact the document flow in Sales order shows the process was done till Delivery and it was archived then.
Can anyone help me in this, how can I get rid of from this stock in MMBE. Though LS24 is apparently right.
Waiting for your replies...
Thanks,
Amit Gaigawale

Hi,
The Delivery was not PGied. The stock in MMBE is reflected in Unrestricted stock, however it doesn't branch to WM stock view when from menu I try to see that.
Amit G

Ipod not seen on computer or iTunes, and has no icon while loading...

my iPod Video 30GB has worked fine on my PC since I got it, and everytime I plugged it into my PC, the iPod screen displayed the message "Do not disconnect the USB cable". Just some few days ago, the message was not displayed at all, and the iPod was not seen on iTuned or on My Computer. The iPod still gets recharged, but it does not show up, and does not display the "Do not disconnect USB cable". I have connected the iPod on my a mac and it worked perfectly fine even though my iPod is Windows Formatted. But it just does not work on the pc anymore. please help! I have tried so many things but nothing seems to work!!!!

Try this link it regarding your computer recongizing your iPod as a network drive
http://docs.info.apple.com/article.html?artnum=93499

Ipod not seen by windows or itunes

Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.

I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1

How do I change the "trash" icon to "archive" icon in email on my iPhone using iOS7?

How do I change the "Trash" icon to "Archive" icon as the default setting in email using iPhone iOS7?

That is very much dependent on your Email account.
Go to Settings->Mail,Contacts,Calendars->Accounts->Your Account->Account->Advanced->Move Discarded Messages Into.
Choose Archive Mailbox.
It may not be there if its not supported by your email provider.

I installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active

i installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active

You will have to upgrade your operating system version and possibly your whole computer. We cannot provide more information easily until we know more about your system.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Apple does tell you about required equipment for the iPhone -- in 8 point medium gray type on a light gray box. The Store associates kind of automatically assume everybody is running a new model computer and the one I met when we bought our iPhone had never seen a pre-2008 Mac and was somewhat puzzled why anybody would own such an antique.

Badge on phone icon will not clear

Since upgrading my iPhone 4 to iOS 5 the badge on my Phone Icon will not clear, it shows up with no number in it and shows on the home screen icon as well as on the voicemail tab inside the phone app. I have tried a reset, turning the badge settings on and off again, quitting the phone app and NOTHING works.

Hi there Sean.
Yes this is a problem with the Sim.
I've only ever seen this from orange with regards to this particular model of handset.
If you take your phone to you rnearest orange shop and ask them to supply you with a new sim card then im pretty sure that will solve your problem.
The staff will probably tell you otherwise and ask you to take it to a CNSP but be firm.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

HT201320 Re: I compose in yahoo using safari but the attachment icon is not visible, I compose in yahoo using safari but the attachment icon is not visible

i compose email using yahoo thru safari and the attachment icon is not visible
from apple ONLINE HELP they told me yahoo version is different than the ipad version??????????
then today they told me not to go thru safari but use the yahoo email app
tried that as well and still no icon of attachment is seen.
PLS CAN SOMEONE HELP AS TO HOW DOES ONE SEE THE ICON FOR ATTACHMENT....as even the apple store guys are unable to help

Iam trying to attach normal files

MSPS 2013 - related a document to the project tasks - Icon is not visible in project schedule

When adding a document (related Items) to the project tasks in a project schedule at the task does not see the icon of the document.
Although the icon issue or risk when binding is visible.
And the icon is also seen in the "Projects Center"
Also related items are not visible in the "Tasks" (http://server/PWA/Tasks.aspx) from the user.
Attachments
View, add or edit related information such as documents, issues, or risks.
Issues
Title
Due Date
Status
Risks
Title
Due Date
Status
Documents
Title
File Name
Status
Maybe someone know why it don't works?

Anyone can reproduce this steps on Project Server 2013:
* Upload document to project site document library
* Open project plan for editing in pwa, add to any task related item – uploaded in previous step document
* Save and publish project
Than check in project schedule and project center – icon associated document to task and project.

Messages are Archived but cannot be seen in Outbound Interface in RWB

Hi Experts,
I am having File to RFC scenario......where files are successfully pinged from FTP server and getting archived.....
but when I check in RWB the files are not found in Outbound Interface in Message Monitoring...........
Then I am deleting the Archived files and placing again manually in FTP server......Then files are archived and seen in
outbound interface successfully......
I m not getting where the exact problem is.........From 2 days I m placing manually the files after checking the files are not
seen in Outbound Interface....
Please help me out.....
Regards,
Sudheer

Hi Sandeep,
I have checked the File Communication Channel.......
Tick check-box of "Add Time Stamp". --- OK
Give path of Archive Directory correctly & complete. -- OK
Also choose "Empty file Handling" for Process Empty file. -- Not Checked.
Regards,
Sudheer

My battery icon does not always show in panel (multiple DEs)

I've been meaning to ask this for a while. I kind of asked in passing not really looking too hard for an answer. And from what I heard others aren't having this issue, but then again I didn't ask very in depth.
On my laptop if I plug in my power cable I can see my battery icon in the panel, then when I unplug it I can see the battery icon. However, after a certain amount of time of being unplugged the icon in the panel disappears until my laptop gets really low on power. Then it reappears. If I plug in my power cable and then remove it I get my panel icon back immediately, but only for a short time.
I was using XFCE and thought it might be a problem with the new Power Manager. Whenever the icon would disappear I could go into the Power Manager settings and it was never wrong. It always told me correctly if I had a line in or line out.
So I tried with GNOME and the exact same thing happens. i haven;t tried with any other desktop environments. Has anyone seen this issue?

No, I've not seen it.
Look at the pseudo files in /sys/class/power_supply. On my system, these are the interesting ones:
ewaller@odin ~ 1048 %ls /sys/class/power_supply/BAT0
alarm capacity_level charge_full_design current_now device model_name present status technology uevent voltage_now
capacity charge_full charge_now cycle_count manufacturer power serial_number subsystem type voltage_min_design
ewaller@odin ~ 1049 %cat /sys/class/power_supply/BAT0/voltage_now
12467000
ewaller@odin ~ 1050 %cat /sys/class/power_supply/BAT0/charge_now
3670000
Ensure that these files are not appearing and disappearing. Also, check their contents and see if the data are rational
Last edited by ewaller (2014-12-24 17:25:27)

Canon MG7100 not seen on network

Worked fine for months then non-specific problems with HH5 like drop outs which now intermittent. Pinter says connected to access point and correct SSID seen but can't be seen on laptop or any other connected device and not seen on home network device list. Sorry I'm not technical in the least!

This is also happening to me on some occasions.
When I try to see my portable on the finder window, and it does not show up, I have discovered that some times, if I click on my hard drive and then back on the Network icon, my portbale is finally shown.
I do not know why this is happening.
Sometimes, if I also restart the portable, it also helps in revealing it.
One question if I may: how are both your machines obtaining their IP addresses?
Best regards
Andrew

Archive icon is not seen in fcx 10.1.1

Similar Messages

Maybe you are looking for