Archive in two locations?

Using Yosemite and I'm having an issue with Mail where:
1. I have this strange gray dot in front of my Archive folder, what does that represent?
2. My Archive folder is showing up in two locations for one of my accounts.
PS Strange Yosemite is not a Community option to select.

Hi,
and before than run "crosscheck archivelog all;" to catalog all archivelogs
Regards,
Tom
www.oracledba.cz

Similar Messages

  • Use MDT share on two locations, servers?

    Hi,
    I'm using Dropbox to make a backup of my MDT-share (lab-environment).
    Now it would also be interesting to use it effectively on the two locations (home lab and laptop which I carry around (runs several vm's). I'd like to avoid creating multple shares since my content would double then (Windows OS-es, Applications etc) without
    really needed.
    What would be the best way to achieve? Pls advise.
    J.
    Jan Hoedt

    if you want to make a backup of your deployment share, then it all depends on how much custom *stuff* you added to the Applications, Operating Systems, Drivers and Scripts.
    In most cases, If I wanted to backup my applications (for example) , and the command lines entered into the MDT console, I would just archive the DeploymentShare$\Control and DeploymentShare$\Applications folder. Most everything else can be reconstructed
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

    How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

    There is no difference please be aware that each login is provided with two activations however.  If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

  • I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

    I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

    Many thanks JEM24 for your help.  Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone  the actual cost of each additional  gigabyte of storage  to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

  • DSL line at two locations

    We have the need to establish a network that connects the VolP phones in the garage of a ranch house and the WiFi network in the remainder of the ranch house.
    We have extentions of the DSL line at two locations. 1. At the garage and 2. In the other side of the house.
    We have purchased a SPA2002 and a WRT54G WIRELESS-G ROUTER, can you give me instructions as to how to do it?
    I AM A COMPLETE NOVICE, SO PLEASE KEEP IT SIMPLE FOR ME.

    Hi,
    The one which you see in the path <AIA Directory>\AIAComponents\EnterpriseObjectLibrary\Core\Common\V1 is the release 1. If you open the Datatypes.xsd you could spot the difference.
    ** AIA Enterprise Object Library **
    ** Version 1.00 **
    ** Date: 01 Nov 2007 **
    Do check the Datatypes.xsd in <AIA Directory>\AIAComponents\EnterpriseObjectLibrary\Core\Common\V2. This is the latest release and it imports the xsd from Infrastructure library.
    ** AIA Enterprise Object Library **
    ** Version 1.00 **
    ** Date: 22 Aug 2008 **
    Regards,
    Rahul

  • I back up my iphone onto itunes on my laptop. I've now got a new laptop, which counts at two locations. This new laptop had to be setup again. Apple says this is three locations. How can I get it changed to two locations?

    I backup my iphone onto itunes on my laptop. Recently I got a new laptop, so that counts at two itunes locations.
    Unfortunately this new laptop was faulty and had to be set up again from scratch.
    Apple now says that's three itunes locations when in fact it's two.
    How can I get this changed back to two locations?

    If by locations you mean "authorized computers" then one of your computers (apparently the new laptop) may be using multiple authorizations.
    To check on this and correct see here: http://support.apple.com/kb/HT1206

  • Replicate in Two Locations? SAP B1 HANA High Availability

    Hello Experts!  Hope this message finds you well.
    Can we replicate SAP B1 HANA to a standby server that is in another location? 
    Example Active Server\Central Server at my New York Data Center and Standby Server in Ohio
    What would be needed in terms of high speed pipe between locations and NTP to synch time to a common time server.
    Thank you for your advice.
    Ed

    Hi Ed,
    Currently the two locations have to be within ~100 KM of each other.  You find this in section 14 of the HANA admin guide for SP6.   You can open a support ticket asking what to consider if you want a distance greater than 100KM.
    Best regards,
    Duncan

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Signed in at two locations? is someone using my account?

    Both my dad and me have the same error message about being signed in at two locations when we are not. We are also in different countries, signed in only once or indeed not at all.
    I have googled this and see the error message is very old.
    Any experiences out there?
    The text is:
    Your Screen Name ([email protected]) is now signed into AOL(R) Instant Messenger (TM) in 2 locations. To sign off the other location(s), reply to this message with the number 1. Click here for more information.
    The more info link is this one:
    http://info.aol.co.uk/aim/password/routing.htm
    Just to be clear: we are NOT logged in twice by any means we are aware of.
    I am wondering if it has anything to do with dot mac syncing as my username "goes online" to do that of course. Though I'm not sure how ichat comes to be loaded even then - again not knowingly by me. Of course dot mac (now me) is nothing to do with AOL screen names. As far as I know.
    This is an old symptom.
    Anthony

    aha. Now that's interesting. In my the case of me (not my dad), I do not have ethernet and wireless, but I do have multiple wireless networks (3) as well as multiple VPN's (2). So perfectly possible that as I switch between these iChat notices a change of interface. What I can't understand now, is how iChat is loaded in the first place.. checking prefs now... result: I cannot see a pref that says to load iChat at startup or indeed at any other time. Probably just can't see it for looking since this would explain how come iChat is loaded and I am surprised. I have no idea it is running until I see the "double logins/two locations" message.
    My Dad. He has only one system - I'll check with him in case he is running ethernet AND wireless. He doesn't know the difference, so just plugs everything in and it works Quite possible his Wanadoo box is offering wired and wireless at the same time via dhcp.
    If that is the case then I have only one question left: how is iChat loading up and that's going to be easy to answer (apart from me with my blinkers on just now).. so answers very welcome please.
    Never ceases to surprise me where these threads lead. In this case it looks like "locations" == "network interfaces " - well, why don't they just say that ?
    Anthony

  • How do I eliminate two locations on My Documents and MY Picture folders?

    For a long time, I have had two double sets of My Documents and My Pictures with each having the other 's files on it/ them. Please advise.

    Hello @jmcgratty22,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are looking to eliminate two locations on the My Documents and My Pictures folders of your desktop computer, and I would be happy to assist you!
    Since it appears that both the Documents and Pictures folders have mirrored themselves, I recommend performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • ICloud Mail - Accessed from two locations simoutaneously?

    Hello,
    I got this message this morning from my iCloud Mail.  It says that my iCloud Mail account has been accessed from two locations simoutaneously, and that I have 24 hours to receive confirmation of ownership of my account or it will be suspended.  There are no links in the email to confirm that I am the real user.  What do I have to do to prove that I am the real owner?  I don't want my email suspended!
    Thanks for any information before 9:00 AM tomorrow, because that's when the 24 hours are up.

    Yea, that sounds fishy.  Can't believe that Apple would mispell iCloud.  Looks like someone wanted you to reply with your username, password and location.  Might be worth contacting Apple about it.  If you explained that you were contacting them as a good samaritan to report a possible security threat that might effect other users they probably wouldn't charge you for the call.
    If you're concerned, you could always change your password (http://support.apple.com/kb/HE36).  After doing so you would need to sign out, then back in using the new password for all services you are using the ID for.  For iCloud, you have to delete the account (which only deletes the account and your synced data from your device, not from iCloud), then sign back in with the new password.  Your data will be synced back when you sign back in.

  • One apple ID two locations

    My wife and I are are on two sides of the world. She has the powerbook G4 and logs in as [email protected] , I also have a duplicate powerbook and also log in as [email protected] We want to IChat with video, but when we both log in online, the AIM bubble pops on and says we can't log on as the same user in two locations. Is there anyway around this?

    Hi James
    Yes get another iChat screen name Free http://www.mac.com/1/ichat.html>HERE and if you still got time take your @mac.com details out of your post as you will get a lot of spam.
    Tony

  • HOW DO I BOOKMARK IN TWO LOCATIONS FIREFOX 5

    HOW DO I BOOKMARK IN TWO LOCATIONS FIREFOX 5, MAC OS X
    2 USERS-NEED SEPARATE FOLDERS

    Adobe Reader Touch does not support adding new custom/personalized bookmarks to pages yet.
    Currently, Adobe Reader Touch supports viewing pre-existing bookmarks that have been created by the author of a given PDF document. If a PDF document has bookmarks, Reader Touch shows the Bookmarks button on the right side of the top toolbar.
    The users of Adobe Reader for iOS/Android have requested the capability of adding new custom/personalized bookmarks as well.  We are planning to add the capability to a future release of Adobe Reader Touch. But we cannot commit to a specific date for the release at this point.

Maybe you are looking for