Archive Information Structure purging

Hi All,
We have a requirement to automate the Archive Information Structure (AIS) purging.
Currently it’s been done manually from the transaction SARI.
The Suggested solution involves recording (SHDB) the above manual process and write a Call Transaction program for purging multiple info structure.
Are there any alternatives for purging AIS other than using recorded SARI transaction?
Can this be accomplished by calling some function modules?
Thanks & Regards,
Abhijith P.K

hi,
Thank you so much,that's just what I want,however the transaction may be MCSX.
Lance

Similar Messages

  • How to archive information structure?

    hi,
    There are some Archiving Object for information structure in ECC 6.0, however I can't find this in the version ECC5.0 and R/3 4.6C,I want to know if it means we can't archive information structure in these version?
    Thanks in advance.
    lance

    hi,
    Thank you so much,that's just what I want,however the transaction may be MCSX.
    Lance

  • Is there any program to read the archived information structrue data ?

    Hi,
    The tcode MCSX can archive information structure, however it can't read the archived data, is there any program has this function?
    Thanks.

    Hi
    You may look into some of the FMs mentioned below.
    ARCHIVE_GET_NEXT_OBJECT
    ARCHIVE_OPEN_FOR_READ
    ARCHIVE_READ_OBJECT
    ADDRESS_READ_ARCHIVE_OBJECT
    Also in SE37, you can put a F4 on ARCHIVE to get some FMs for this purpose.
    You can consult with your technical guy, who can give some insights into this.
    Hope this helps you.
    Reward if this helps.

  • Archive info structures

    Hi,
            There is a standard archive object FI_MONTHLY. In table AIND_STR1 (archive info structures), I could see that there are 5 info structures( SAP_FI_MONTH_01 to SAP_FI_MONTH_05) corresponding to this archive object FI_MONTHLY.
    But, using SARJ transaction, if the info structure  SAP_FI_MONTH_01 is given, it is saying that ' Info structure SAP_FI_MONTH_01 does not exist .Do you want to create SAP_FI_MONTH_01? '.
      Please suggest what could be the problem.
    Thanks in advance,
    Vishnu Priya

    Hello Vishnu,
    If you check AIND_STR1 again, you will notice that the 5 entries for archive object FI_MONTHLY are type "S" for Field Catalog.  You will need to create the actual archive information structure based on one of the 5 field catalogs.
    Please let me know if you need additional information.
    Regards,
    Karin Tillotson

  • Archiving Information System (T-code:SARI)

    Hi,
    Has anyone use the archiving information system before? If yes, please briefly explain what's the purposes and requirements to use that.
    Thanks,
    CW

    Hello,
    The Archive Information System (AS) is a tool that allows you to display archived data.  SAP provides many archive information structures and field catalogs, but you are able to change them to meet you needs or create your own.  Using archive information structures will add tables to your database, so you need to monitor their table growth.  There is an excellent book "Archiving Your SAP Data" that you can get from the SAP Press that provides information in depth on this subject.
    Regards,
    Karin Tillotson
    Message was edited by:
            Karin Tillotson

  • Archive Information System (AS)

    Hi All,
         Can any body please explain me the concept (or purpose)of Archive information system or information structure. I want to know whether it will contain archived data or not.
    Thanks in Advance!
    Regards,
    Kannan

    Hello Kannan,
    The archive information system is a tool used to access archived data.  An archive infostructure is an "index" used to directly access the archive data files.  They will contain a small subset of the archived data - the fields which have been configured to use as search criteria, plus the pointer to where the rest of the archived data resides.
    Hope this helps.
    Best Regards,
    Karin Tillotson

  • Exchange 2010 Online Archiving - Folder Structure Incorrect

    Greetings,
    We have recently been enabling Exchange Archiving for various users with great success.  I have one particular user that we have enabled it on, and it appears the Online Archive folder structure is not being generated when items are processed to be
    archives.  Items are being archive to the root of the Online Archive mailbox, where with other users, we notice that it create a folder that matches the same folder in the users primary mailbox and then moves the messages to that folder.
    What would be causing this not to generate a folder structure that matches the folder structure on the users primary inbox?  We have seen these successfully done on multiple users, but this particular users it is not working.  As I stated above, all
    archived e-mails are being stored in the root folder of the Online Archive Mailbox.
    Any thoughts are greatly appreciated.
    Cheers

    Hi,
    I would like to verify if you use the same method to enable online archive for these users.
    I recommend you use the following cmdlet to enable online archive for this problematic user.
    Enable-Mailbox [email protected] -RemoteArchive -ArchiveDomain "xxx.xxx.xxx"
    What's more, you can use the Get-Mailbox alias -Archive | fl name,archive* to check the archive information.
    Here is a helpful article for your reference.
    Enable a Personal (On-Premises) or Cloud-Based Archive for an Existing Mailbox
    http://technet.microsoft.com/en-us/library/dd979796(v=exchg.141).aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Information structure SAP_DRB_MM_EKKO: the index ID '' is not permitted

    Hi,
    When i'm activating archive infostructure "SAP_DRB_MM_EKKO".I'm getting the following error
    Information structure SAP_DRB_MM_EKKO: the index ID '' is not permitted
    Please can anyone give solution for this.
    Regards
    Subhash

    see OSS note 1111785 - Wrong variant/index in archiving customizing

  • How to create a new report from an information structure?

    Dear gurus,
    My customer wants to have a sales report by product hierachy. I want to create an information structure for product hierachy and create a report from this info structure like a standard report. I dun know which steps to do. Pls tell me how to do. Your help are highly appreciated.
    Thank you!
    Rgds,
    Nghi Do

    Hi,
    Steps in LIS EXTRACTION:
    T.code - :MC18 u2013 create field catalog
    1. Characteristic Catalog
    Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
    Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
    Save, similarly create key figures catalog
    T.code : MC21 u2013 create infostructure
    Example u2013
    Inforstructure : S789
    Application u2013 01
    Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
    T.code u2013 MC24 u2013 create updating
    Infostructure : S789
    Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
    T.code u2013 LBW0 - Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
    Select the radio button-Generate data source and Execute.
    For Delta update:
    Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
    T.code u2013 SBIW u2013 Display IMG (implementation guide) Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
    Choose activity
    Setup u2013 Orders, deliveries, billing
    Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
    T.code u2013 RSA3 u2013 Extractor checker
    Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
    For delta update :
    In R/3 side
    T.code u2013 MC25, set update (V1) or (V2) or (V3)
    T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
    BW side - create infopackage and schedule the package with delta update.
    First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
    If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
    and schedule the infopackage with delta update.
    Modules for LIS : SD,MM, PP,QM.
    Deltas for LIS:
    After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables u2018SnnnBIW1u2019, u2018SnnnBIW2u2019 and the structure u2018SnnnBIWSu2019 and the InfoStructure itself u201ASnnnu2018
    The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
    Extract structure u2018SnnnnBIWCu2019 is used as an interface structure between OLTP InfoStructure and BW
    The OLTP system has automatically created an entry in the control table u2018TMCBIWu2019. Within transaction u2018SE16u2019 youu2019ll see, that for your particular InfoStructure the field u2018BIW activeu2019 has the value u2018Xu2019 and the field u2018BIW statusu2019 is filled with value u20181u2019 (refers to table SnnnBIW1).
    The orgininal LIS update program u201ARMCX#### will be enhanced within the form routines u201Aform Snnnbiw1_update_....u2018 and u201Aform Snnnbiw2_update
    With the transaction u2018SE38u2019 youu2019ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a u2018BIW delta updateu2019 coding
    Within the flag u201AActivate/Deactivateu2018 the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table u201ATMCBIWu2018 is defined, which table is active for delta update.
    Note: The delta updating is client dependent !
    Regards,
    Ram Pedarla
    Edited by: RamPedarla on Apr 1, 2010 10:35 AM
    Edited by: RamPedarla on Apr 1, 2010 10:35 AM

  • Error 4 occurred while information structure S001 was being updated.

    Hi experts,
    I set up the environment for the 2LIS_01_S001 DataSource (InfoCube 0SD_C01) accordingly these steps (as mentioned in another thread):
    1) Activating LIS update - goto OMO1 transaction code
    In the Updating – Info Structures(S001) - double-click the Updating radio button for Info structure S001.
    In the Parameters dialog box select Synchronous updating and choose ok.
    2) Goto OLI7 Transaction code - run the statistical update.
    3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
    4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
    5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
    6) In BW, Replicate DataSource, and run info Package with Initilization.
    7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
    8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
    But in step 2 , I am getting an error i.e 
    Error 4 updating info structure S001
    Message no. M2022
    Error 4 occurred while information structure S001 was being updated.
    The update was attempted with the following key:
    &V3 0100000000000000290658
    I am not understanding this error,so cant proceed further.
    waiting for ur replies.
    Thanks in advance.

    Hi Colum
    I have two systems in both i am doing the same process.
    But in my one system i am getting  error
    but in my other system i am not getting  error and my set up table is filled with records.
    According to that note key figures sequence in S001, S001BIW1 & S001BIW2 should be same.
    but i my other system, key figure sequence is different and i am fine working with it.
    so why it is not able to fill my set up table for my other system ?
    thanks in advance.

  • Message while creating user defined information structure

    Hi Experts,
    Iam creating a user defined information structure for flexible planning. I selected the following characteristics.
    1. Sales organization
    2. Distribution channel
    3. Sold to party
    4. Plant
    5. Material
    But I get the following message "Include product groups/materials field for planning hierarchy".
    May I know whats the reason for this message and how to solve it.
    Please help me here.
    Thanks in advance
    Pradeep.

    Th hierarchy what you created may have some error, please reassign the sequence in hierarchy and check it out, it will work

  • No archive information found for object type  and document type

    Hi All,
    When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type  and document type"
    Diagnosis
        No information was found about optical archiving. This may be due to
        either of the following reasons:
        1.  No valid archiving parameters were passed
        2.  Your system is not configured for optical archiving
    System Response
        Processing is cancelled.
    Procedure
        Specify valid archiving parameters or check whether your system is configured for optical archiving
    Regds,
    CB

    Hello,
    You are trying to Print & also archive by selecting the option Print & Archive.
    You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
    If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
    Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
    Hope this will give you some understanding on archiving area.
    -Thanks,
    Ajay

  • SD Information Structure

    Hi everyone,
    I am working with flexible planning in SOP and I would like to find an SD information structure that includes the following key figures:
    -Material
    -Plant or Shipping point
    -Open orders quantity
    Could anyone please tell me whether exists any information structure according to my requirements?
    Thanks in advance and best regards.
    Ben.

    Ben,
    May I know which position type you are referring to?
    Thanks
    Krishna.

  • Unbilled information structures in IS-U for BW

    Hi!
    I am doing the configuration in IS-U for getting data for unbilled revenue reporting, simulation documents...
    My problem is, the information structures needs BILLRUNNO field, that exist into the table, however, when I want to select the characteristics from table, doesnt appers.... HOW CAN I SOLVE THE PROBLEM??? How can I add the field to the structure? somebody knows... it is similar to structure standard S440 and S441
    Thanks a lot
    BR

    Hi, UIS and individual procedure doesn't exclude each other. Means, you can use the individual procedure with UIS also.
    But if you want to do the individual procedure (and store the values on a granular level - that's often the case), UIS will run into performance issues because of the very high data volume.
    That's why you shouldn't use UIS here but BW. Check also our Service Marketplace here.
    service.sap.com/utilities -> Product Information -> Business Intelligence -> Cookbooks&Guidlines. There is a link to the help.docu provided.
    How big is the customer you want to implement URR (# of customers, # of bills per year/customer)?
    Regards.
    Axel

  • Archive Information System

    Hi experts:
    Can anyone tell me whether the Archive Information System (AIS) can be used to store all the archived files data? We were told in SAP Archiving class (BIT660) that you can purchase a third party storage system for ADK FIles. The SAP instructor also said you could purchase AIS and store all your archived ADK Files on AIS. Is that true? Where can I find information about storing all ADK FIles on AIS instead of buying a third party storage system.
    Thank you
    DennisDK1

    Hi,
    I may be wrong but, in my understanding, AIS has nothing to do with storing archived data files. For that you use an Archivelink enabled software like IXOS or Filenet or plenty of others.
    AIS is Archive Information System and is used to index data archives in order to be able to explore and consult them.
    Check :
    [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5c/11af98d55711d2b1f80000e8a5b9a5/frameset.htm]
    Regards,
    Olivier

Maybe you are looking for

  • Oracle/adf/view/rich/model/AsyncFetch Error in DVT

    Experts, We have some DVT components in our application which runs perfectly on integrated local Weblogic Sever. Once we deploy it to a Weblogic Standalone server, we are getttnig the following error while trying to access the DVT graph page. Rest of

  • How can I make Adobe work?

    I tried to get some information from my personnel file in Liteblue webpage. It asked me to download Adobe. I did. It said successfully but I still can't read my file. I have windows 7 and use internet explorer. How can I fix this problem?

  • Want to create F1 Help for radio button in my report

    Hi All,       I want to create F1 Help for radio button in my report program. Which function module should i call in <b>at selection screen on help-request</b>       Also do I need to define the texts somewhere or I can pass it directly to the functi

  • How do I get the 600 ex-rt off of ratios and put in power output?

    I can't find it anywhere in my manual or the custom functions. For instance, it is showing the ratio of 1:4 instead of the power  output of 1/4 power. I am using a Mark III. Thank you!

  • System freeze / GPU Debug Info Start

    *What happens:* Aperture keeps freezing my mac, I can move my mouse, but can't click anything. Keyboard doesn't seem to work at all. From time to time I get a beach ball instead of regular cursor. Nothing help, need to reset with a power button. *Whe