Archive - is this a new function under 10.5.3

Hello,
I just look at TimeCapsule with the Airport Utility
and see
"Archive" under "Disk"
to archive Time Capsule to an airport disk connected to Time Capsule
I do not recall seeing this option before
is it new ? with 10.5.3

No, that option has been there since the 7.3.1 firmware update.

Similar Messages

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

Question: I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

It's a common issue. The Basic panel is merely hidden.
Hiding/unhiding panels is actually a feature of Lightroom but it is unintuitive - few people know it exists - so most newcomers are thrown when a panel somehow gets hidden.
Right-click anywhere in the right hand side panel area and a context menu will appear.
Click the Basic option to make the Basic panel re-appear.

On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it Thank-you

On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it
Thank-you

How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

How to keep the right sidebar on this website from going under the main content (center) column?

Hi...is there a way to keep the right sidebar on this website from going under the main content (center) column when the browser window is made smaller? It would be great if the middle (main content) column could get smaller instead of the sidebar moving under the text when the window is made smaller. I'm working with a fluid layout and this is the first time I've tried this. Any help would be appreciated. Here is the link to the website:
http://www.elynncohen.com
and here is my code:
<!DOCTYPE HTML>
<html>
<head>
<meta charset="UTF-8">
<title>Your Career Direction Career and College Counseling</title>
<meta name="Keywords" content="career counseling, college counseling, job search, career choice, college options, career options, work, jobs, new opportunities, career change, new career, new job" />
<meta name="Description" content="Your Career Direction :: Career and College Counseling" "Considering your college choices & career options" "Preparing for the world of work after college" "Seeking a new position to further your career"
"In-transition and considering new opportunities"
"Seeking to make a significant and meaningful career change" />
<meta name="Publisher" content="Your Career Direction, LLC" />
<meta name="Copyright" content="Copyright 2012, Your Career Direction, LLC. All rights reserved." />
<meta name="Author" content="Lisa Mark" />
<meta name="Language" content="en-US" />
<meta name="distribution" content="global" />
<meta name="revisit-after" content="10 days" />
<meta name="Robots" content="All" />
<link rel="Index" href="index.html" />
<link rel="Site Map" href="sitemap.html" />
<script type="text/javascript" src="//use.typekit.net/ifb2bte.js"></script>
<script type="text/javascript">try{Typekit.load();}catch(e){}</script>
<style type="text/css">

</style></head>
<body><script type="text/javascript">
function pageWidth() {
return window.innerWidth != null? window.innerWidth : document.documentElement && document.documentElement.clientWidth ? document.documentElement.clientWidth : document.body != null ? document.body.clientWidth : null;
function pageHeight() {
return window.innerHeight != null? window.innerHeight : document.documentElement && document.documentElement.clientHeight ? document.documentElement.clientHeight : document.body != null? document.body.clientHeight : null;
</script>
<div class="container">
<div class="header">
    <p class="clearfloat"><a href="#index.html" id="Insert_logo2"><img src="images/YCD-logo-tag-RGB-web-SM.gif" alt="Your Career Direction Logo" name="Insert_logo" width="50%" id="Insert_logo2" style="background: #FFF
    ; display:block;" /></a></p>
    <div id="Quote"><img src="images/quote.gif" alt="Choose a job you love" width="355" height="81"></div>
    <p class="clearfloat"> </p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Home</a></li>
      <li><a href="#">High School Students</a></li>
      <li><a href="#">College Students</a></li>
      <li><a href="#">Parents/Educators</a></li>
      <li><a href="#">Professionals</a></li>
      <li><a href="#">Bio</a></li>
      <li><a href="#">Q & A Blog</a></li>
      <li><a href="#">Testimonials</a></li>
    </ul>
</div>
<div class="content">
<p>Given today's competitive job market, global economy, and changed corporate culture,
we can no longer depend upon others to ensure our professional futures. Choosing or
changing your career direction requires self-reflection, career education and an action plan.</p>
<img src="images/Whether-you-are-.gif" alt="Whether you are considering your college choices and career options" width="197" height="31" align="left">
<ul>
      <br><br><li><strong>Considering your college choices & career options</strong></li>
      <li><strong>Preparing for the world of work after college</strong></li>
      <li><strong>Seeking a new position to further your career</strong></li>
      <li><strong>In-transition and considering new opportunities</strong></li>
      <li><strong>Seeking to make a significant and meaningful career</strong> <strong>change</strong></li>
    </ul>
<img src="images/Onethingisforsureraster.gif" width="352" height="49" alt="One thing is for sure, we all want to direct our own careers, our own lives!">
<br><p> Building a successful and rewarding career requires linking your interests, education and experience with employment trends, growth industries, and career choices. It takes making smart decisions about your college major, vocational training and continuing education options. With enthusiasm, persistence and top notch job search skills, you can succeed in finding a path to career that is right for you.</p>
<p> We are your advocate. We listen, assess, strategize, inspire, counsel, and network on your behalf. With a personalized, holistic approach, we'll work with you to help you create an action plan; a path designed to get you to where you want to go and become what you want to be.</p>
<img src="images/yourcareerourpassionraster.gif" width="441" height="20" alt="At Your Career Direction, YOUR career is our passion!"> </div>
<div class="sidebar2">
    <p><img src="images/Counselingastudent.gif" width="100%" alt="Lisa Mark counseling a student"></p>
    <p>Our mission is to help you explore, choose and create your direction for an exciting and rewarding career path.</p>
     <p>We incorporate our experience with today's job market and career counseling expertise with your passions and interests. We'll introduce you to new career ideas, target companies and generate job and internship opportunities for you.</p>
     <p>We provide step by step guidance to ensure your success during the college application, job interview
and decision making process.
</p>
</div>
<div class="footer">
    <div id="footer">
      <h6 align="left"> Your Career Direction, LLC • 96 Harvard Avenue, Maplewood, N.J. 07040 • (973) 996-0207 • [email protected]</h6>
         </div>
    <p> </p>
</div>
</div>
</body>
</html>

You should make your sidebar1 and sidebar2 fixed positioned. Make your content DIV fluid.
This should help you: http://www.glish.com/css/7.asp

Error adding new function in order template

Hi,
When i am trying to add a new function to order Template under /contolData/Functions/ form data dictonary
I am getting error :
Element with same name exist.The following nodes can not be added to the order.
(no namespace):/ControlData/Functions/MyNewFunction
(no namespace):/ControlData/Functions/MyNewFunction/componentKey
Thanks
Harman

Hi Harman,
You might need to be more specific before I can help you. What have you done, and which step you run into the error? I supopse you have created a new "function" Order Component, and created the required Control Data nodes in Data Dictionary (what have you added?), right? So, when you go into the Order Template tab of the new Order Component (which would be empty since it was newly created), and you try to "select from Dictionary" the corresponding ControlData for the function (e.g. /ControlData/Functions/MyNewFunction), that such an error occurs?
Have you assigned a process for this Order Component? Studio does not allow adding control data to it unless a process is assigned.
Btw, you should define a namespace for your Order Components (and other orchestration entities). The OSM server uses namespace to locate these entities among cartridges.
Cheers,
Daniel Ho
Product Management -- OSM

Copied Function Group to New Function Group Name

After I did this why do some objects have blue text and some have black text in SE80 under the new function group name??
Thanks.

HI,
This exists to show you an inactive object on the Function Group.
Try to activate the all objects in Function Group and the color will be changed.
Regards.
Marcelo Ramos

New Function Pool Program Question?

I am new to these processes.......If I copy a Function Pool Include to a new one, and create a new Function Group to link it to, thus I assume a new Function Pool SAPLZXXX program will will be automatically created, I am trying to determine how, or where config?, is done to link it (the new Function Pool/SAPLZXXX) to its process?
                Any input will help.....Thank-You.

Hi,
When you create a Function group under a Function pool, then inside of that Function group main program there will be some includes
·        LfgrpTOP. This contains the FUNCTION-POOL statement (equivalent for a function group of the REPORT or PROGRAMstatement) and global data declarations for the entire function group.
·        LfgrpUXX. This contains further INCLUDEstatements for the include programs LfgrpU01, LfgrpU02,... These includes contain the actual function modules.
·        The include programs LfgrpF01, LfgrpF02,... can contain the coding of subroutines that can be called with internal subroutine calls from all function modules of the group.
Regards
Sudheer

How do I trim video clips in Quicktime Player? The "trim" function under the edit menu is gray and won't do anything.

I am trying to edit video clips from about two yesrs worth of video for an iMovie. I don't want to load all of the clips into a new event because it would be hours worth of video. I don't even know if iMovie could handle it. I have tried to use Quicktime Player to do this, but the "trim" function under the edit menu is gray and won't let me do anything. What can I do?

Thank you so much!
It works!
I used this code...
videoDisplay.addEventListener(VideoEvent.COMPLETE, videoCompleteHandler);
private function videoCompleteHandler(event:VideoEvent):void {
     hideVideo();
private function hideVideo():void {
     this.visible = false;
     this.includeInLayout = false;
I have a follow up question...
What is the syntax to target the video player from a different component to add an event listener to a button in the Sharing Widget called Back to Video?
Thanks!!
DK

Creation of new fields under sales tab in XD01

Hello,
I have to create a new field under the sales tab in XD01. Please let me know how i can do this? or is there any other way of adding the new fields to the customer master..
Thank You!!!!
Suresh

Hi,
you can add to fields with customizing a cross the below path:
Financial accounting/accounts receivable and accounts payable/customer accounts/master data/define screen per activity (customers),
but i dont know how add new fields,
regards,
David

How to do ALV Popup in a new Function module

Hi experts,
This is the Client Requirement.
" Flow Diagram/Pseudo Code:
Attach a data flow diagram. Write brief pseudo code in plain English. Be sure to include all access data plans.
-     FM interface:
-     Import: company code/ vendor#.
-     Export: default_line, type y4ap_t11
-     Exception: NO_DATA or CANCELED
In the FM code, past current z_venddefault code, except for write statements. After internal table is generated, show it in ALV popup. On ALV, add a OK/Cancel button. On OK, ensure that one line is selected (otherwise throw warning), and then fill export structure with that lines G/L account, cost Center, and internal order# fields. Then close the ALV and end FM. For Cancel, just close the ALV end the FM.
For an example of how to build such popup ALVs, take a look at FM Y4AP_SELECT_APPROVER.
Unit Test Plan:
Just use co.code 3000/vend# 1000 to test this FM."
here i need to do is there is a simple report program by displaying in list.
But now i need to do is , i have to put that code in a new function module and there i need to display it in alv grid.
How to do this can anybody help me.
It's a urgent i need to submit today to client.
Thank you
Basu

Hi,
Check this.
select several rows in alv
It will be helpful.
Regards,
J.Jayanthi

RE: Typekit...how do I move the code from an old account to my new account under the Creative Cloud?

RE: Typekit...how do I move the code from an old account to my new account under the Creative Cloud? W/out (preferably) interuption to the website in question? Thanks!

Hi Jesse,
Please email us at [email protected] with:
- your current Typekit account email address
- the email address you use for Creative Cloud
We will be able to help you make this change without disrupting your current font serving.
Thank you,
-- liz

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?
I have an old Numbers sheet where I could make the checkbox Cell go Green when ticking "Equal to" TRUE. When I open the old sheet it into new iWork it functions correctly. But I am unable to copy or paste the rule - nor recreate it.
Any suggestions on how to create a Conditional checkbox cell that goes green once ticked would be most apprecicated.
Thanks - Steve

Numbers 3.0 is missing the logic-based "equal to TRUE" or "equal to FALSE" conditions for conditional formatting. The replacement is text based: "text is TRUE" or "text is FALSE". You can apply these rules to cells formatted as checkboxes.

Cannot see any actions while creating a new function in CC5.2

Hi All,
We recently installed GRC Access Control 5.2.At the backend we are using SAP R/3 4.7.The system has been installed and I am currently trying to configure it.I am trying to create a new function.After chosing a function ID and description when I try to insert an action,it comes up blank for my production server and even if I choose the option "All".
Any assistance in the matter would be greatly appreciated.

Helo Neo,
For making the functions, risks etc, you need to have some standard procedures being followed and up in place. Uploading transactions,, authorization objects and text are one of these.
Thus before you start actually using/implementing the GRC the system, I would like to advice you to go through the documentation for the same, which suggests the step by step procedure for accomplishing the same.
The problem that you have encountered is a bit easy to track as it suggests the Auth objects and texts might not probably be uploaded. But there might be something you have missed while going the procedural way, which may cause a lot of problems while troubleshooting.
Kindly upload the files in the config tab, under "Upload Objects" and let us know if there is still an issue.
Regards,
Hersh.

Calling New Function Module from JAVA ISA b2b

I need to call a new function module which accepts some parameters as input and
returns some result parameters back as output.
These returned value needs to be displayed on the JSP pages of ISA B2B applications.
Can someone please guide me and provide code snippet on how to do this?
Thanks in advance.
Points will be awarded for all relevant and helpful answers.

Stride,
I did this on CRM ISA 4.0... I used the dev and extension guide as a basis - I think the ISA 5.0 guide has the examples and tutorials in a separate document that can also be downloaded from service.sap.com.
Heres some info on how to do it although I can't guarantee this is the full solution or that it will work the same for ISA 5.0, and I will probably forget a lot of stuff as its been a few years since I did it! I also cant guarantee it is the correct way to do it but it worked! Basically, we built a link into the order overview page to display urls to order tracking websites using an RFC on the backend CRM system. Hope it helps anyway.
1. Create RFC enabled function module in backend.
2. Edit file backendobject-config.xml in folder project_root\b2b_z\WEB-INF\xcm\customer\modification:-
[code] <backendobject
     xmlns:isa="com.sapmarkets.isa.core.config"
     xmlns:xi="http://www.w3.org/2001/XInclude"
     xmlns:xml="http://www.w3.org/XML/1998/namespace">
     <configs>
          
          <xi:include
               href="$
Template for backend object in customer projects
Concrete implementation of a backend object
This implemenation demonstrates how a backend object
is used to communicate with the CRM system
@see com.ao.isa.backend.boi.Z_AOFuncBackend#getOrderDeliveryTrackingData(java.lang.String)
Interface used to communicate with a backend object
The purpose of this interface is to hide backend implementation details
from the business objects
Returns a vector of Z_OrderDeliverTracking objects containing data to link
to external delivery tracking websites
@param orderNo The sales order document number
@return A vector of order tracking objects
@return
@return
@return
@return
@return
@param string
@param string
@param string
@param string
@param string
/modification/backendobject-config.xml#xpointer(backendobject/configs/*)"/>
          
          
          
          <config
               isa:extends="../config[@id='crmdefault']">
               <businessObject
                    type="Z_AO_Custom"
                    name="Z_AO_Custom"
                    className="com.ao.isa.backend.crm.Z_AOFuncCRM"
                    connectionFactoryName="JCO"
                    defaultConnectionName="ISAStateless"/>
          </config>
     </configs>
</backendobject>
[/code]
File com.ao.isa.backend.crm.Z_AOFuncCRM.java looks like this :-
[code] package com.ao.isa.backend.crm;
//jco imports
import java.util.Vector;
import com.ao.isa.backend.boi.Z_AOFuncBackend;
import com.ao.isa.businessobject.order.Z_OrderDeliveryTrackingItem;
import com.sap.mw.jco.JCO;
import com.sap.mw.jco.JCO.ParameterList;
import com.sapmarkets.isa.core.eai.BackendException;
import com.sapmarkets.isa.core.eai.sp.jco.BackendBusinessObjectBaseSAP;
import com.sapmarkets.isa.core.logging.IsaLocation;
public class Z_AOFuncCRM
     extends BackendBusinessObjectBaseSAP
     implements Z_AOFuncBackend
     // initialize logging
     private static IsaLocation log =
          IsaLocation.getInstance(Z_AOFuncCRM.class.getName());
     /* (non-Javadoc)
     public Vector getOrderDeliveryTrackingData(String orderNo)
          Vector urlData = new Vector();
          try
               // get Java representation of function module
               JCO.Function func =
                    getDefaultJCoConnection().getJCoFunction(
                         "Z_BAPI_CRM_ORDER_TRACKING_URLS");
               // provide export parameters
               ParameterList params = func.getImportParameterList();
               params.setValue(orderNo, "ORDER_NO");
               func.setExportParameterList(params);
               // execute function
               getDefaultJCoConnection().execute(func);
               // get result table
               JCO.Table table =
                    func.getTableParameterList().getTable("TRACKING_DATA");
               int numRows = table.getNumRows();
               for (int i = 0; i < numRows; i++)
                    // get row
                    table.setRow(i);
                    // create a new Z_orderdeliverytracking object
                    Z_OrderDeliveryTrackingItem trackItem =
                         new Z_OrderDeliveryTrackingItem(
                              table.getString(0),
                              table.getString(1),
                              table.getString(2),
                              table.getString(3),
                              table.getString(4));
                    urlData.addElement(trackItem);
                    trackItem = new Z_OrderDeliveryTrackingItem();
               return urlData;
          catch (BackendException bex)
               // The following key has to be added to WEB-INF/classes/ISAResources.properties
               // in order to see the exception correctly
               log.config("ao.b2b.order.error.getOrderTrackingURLs", bex);
          return null;
[/code]
And file com.ao.isa.backend.boi.Z_AOFuncBackend.java looks like this:-
[code] package com.ao.isa.backend.boi;
//package java.ao.com.ao.isa.backend.boi;
import java.util.Vector;
import com.sapmarkets.isa.core.eai.sp.jco.JCoConnectionEventListener;
public interface Z_AOFuncBackend
     public Vector getOrderDeliveryTrackingData(String orderNo);
[/code]
Whilst file com.ao.isa.businessobject.order.Z_OrderDeliveryTrackingItem.java looks like this:-
[code]
package com.ao.isa.businessobject.order;
// Referenced classes of package com.sapmarkets.isa.businessobject.order:
//            PaymentType
public class Z_OrderDeliveryTrackingItem // extends SalesDocument implements OrderData
     private String deliveryDocNo;
     private String goodsIssuedDate;
     private String consignmentNo;
     private String status;
     private String url;
     public Z_OrderDeliveryTrackingItem()
     public Z_OrderDeliveryTrackingItem(
          String delDocNo,
          String GIDate,
          String consNo,
          String status,
          String url)
          this.setDeliveryDocNo(delDocNo);
          this.setGoodsIssuedDate(GIDate);
          this.setConsignmentNo(consNo);
          this.setStatus(status);
          this.setUrl(url);
     public String getConsignmentNo()
          return consignmentNo;
     public String getDeliveryDocNo()
          return deliveryDocNo;
     public String getGoodsIssuedDate()
          return goodsIssuedDate;
     public String getStatus()
          return status;
     public String getUrl()
          return url;
     public void setConsignmentNo(String string)
          consignmentNo = string;
     public void setDeliveryDocNo(String string)
          deliveryDocNo = string;
     public void setGoodsIssuedDate(String string)
          goodsIssuedDate = string;
     public void setStatus(String string)
          status = string;
     public void setUrl(String string)
          url = string;
[/code]
3. Edit file bom-config.xml in folder project_root\b2b_z\WEB-INF\xcm\customer\modification :-
[code] <BusinessObjectManagers
     xmlns:isa="com.sapmarkets.isa.core.config"
     xmlns:xi="http://www.w3.org/2001/XInclude"
     xmlns:xml="http://www.w3.org/XML/1998/namespace">
     
     <xi:include
          href="$/modification/bom-config.xml#xpointer(BusinessObjectManagers/*)"/>
     
     <BusinessObjectManager
          name="Z_AO-BOM"
          className="com.ao.isa.businessobject.Z_AOBusinessObjectManager"
          />
</BusinessObjectManagers>
[/code]
File com.ao.isa.businessobject.Z_AOBusinessObjectManager.java looks like this:-
[code] package com.ao.isa.businessobject;
// Internet Sales imports
import com.sapmarkets.isa.core.businessobject.management.BOManager;
import com.sapmarkets.isa.core.businessobject.management.DefaultBusinessObjectManager;
import com.sapmarkets.isa.core.businessobject.BackendAware;
Template for a custom BusinessObjectManager in customer projects
public class Z_AOBusinessObjectManager
     extends DefaultBusinessObjectManager
     implements BOManager, BackendAware {
     // key used for the backend object in customer version of backendobject-config.xml
     public static final String CUSTOM_BOM = "Z_AO-BOM";
     // reference to backend object
     private Z_AOFunc mCustomBasket;
constructor
     public Z_AOBusinessObjectManager() {
Method is called by the framework before the session is invalidated.
The implemenation of this method should free any allocated resources
     public void release() {
Returns custom business object
     public Z_AOFunc getCustomBasket() {
          if (mCustomBasket == null) {
               mCustomBasket = new Z_AOFunc();
               assignBackendObjectManager(mCustomBasket);
          return mCustomBasket;
[/code]
And uses file com.ao.isa.businessobject.Z_AOFunc.java which looks like this:-
[code]
package com.ao.isa.businessobject;
// Internet Sales imports
import com.sapmarkets.isa.core.businessobject.BOBase;
import com.sapmarkets.isa.core.businessobject.BackendAware;
import com.sapmarkets.isa.core.eai.BackendObjectManager;
import com.sapmarkets.isa.core.eai.BackendException;
import com.sapmarkets.isa.core.logging.IsaLocation;
// custom imports
import com.ao.isa.backend.boi.Z_AOFuncBackend;
import java.util.Vector;
Template for business object in customer projects
public class Z_AOFunc extends BOBase implements BackendAware
     // initialize logging
     private static IsaLocation log =
          IsaLocation.getInstance(Z_AOFunc.class.getName());
     private BackendObjectManager bem;
     private Z_AOFuncBackend backendAOBasket;
Returns a reference to the backend object. The backend object
is instantiated by the framework.
@return a reference to the backend object
     private Z_AOFuncBackend getCustomBasketBackend()
          if (backendAOBasket == null)
               //create new backend object
               try
                    backendAOBasket =
                         (Z_AOFuncBackend) bem.createBackendBusinessObject(
                              "Z_AO_Custom");
                    // the backend object is registered in customer version
                    // of backendobject-config.xml using the 'Z_AO_Custom' type
               catch (BackendException bex)
                    // The following key has to be added to WEB-INF/classes/ISAResources.properties
                    // in order to see the exception correctly
                    log.config("ao.b2b.order.error.getOrderTrackingURLs", bex);
          return backendAOBasket;
This method is needed when a business object has a corresponding
backend object.
     public void setBackendObjectManager(BackendObjectManager bem)
          this.bem = bem;
Returns a vector of url links for tracking
@return vector of urls
     public Vector getOrderDeliveryTrackingData(String orderNo)
          // the call is delegated to the CRM aware backend object
          return getCustomBasketBackend().getOrderDeliveryTrackingData(orderNo);
[/code]
4. Edit file config.xml in folder project_root\b2b_z\WEB-INF to add custom actions (the section below is just the custom stuff added at the end of the file the Z_orderTracking is the relevant one) :-
[code] 
     <action path="/b2b/Z_orderTracking" type="com.ao.isa.order.actions.Z_OrderTrackingAction">
          <forward name="success" path="/b2b/order/Z_orderTracking.jsp"/>
     </action>
     <action path="/catalog/Z_displaySVGPage" type="com.ao.isa.catalog.actions.Z_SVGPageAction">
          <forward name="success" path="/catalog/Z_SVG_fs.jsp"/>
     </action> [/code]
Which points at Java file com.ao.isa.order.actions.Z_OrderTrackingAction.java which looks like this :-
[code] package com.ao.isa.order.actions;
// internet sales imports
import com.sapmarkets.isa.core.BaseAction;
import com.sapmarkets.isa.core.UserSessionData;
// struts imports
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.action.ActionForm;
// servlet imports
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.ServletException;
// Internet Sales imports
import com.ao.isa.businessobject.Z_AOBusinessObjectManager;
import java.util.Vector;
This action acts as a template for customer extensions
public class Z_OrderTrackingAction extends BaseAction
This method is called by the ISA Framework when the
action is executed
     public ActionForward doPerform(
          ActionMapping mapping,
          ActionForm form,
          HttpServletRequest request,
          HttpServletResponse response)
          throws ServletException
          // get user session data object
          UserSessionData userSessionData =
               UserSessionData.getUserSessionData(request.getSession());
          // gettting custom BOM
          Z_AOBusinessObjectManager myBOM =
               (Z_AOBusinessObjectManager) userSessionData.getBOM(
                    Z_AOBusinessObjectManager.CUSTOM_BOM);
          // get the order number being processed
          String orderDocNumber = request.getParameter("orderNo");
          // pass the order number back to the page
          request.setAttribute("orderNo", orderDocNumber);
          if (orderDocNumber != null)
               // Get a vector of delivery tracking objects from lower layers (Business Object layer =>
               // Business Logic Service Layer)
               Vector trackingTable =
                    myBOM.getCustomBasket().getOrderDeliveryTrackingData(
                         orderDocNumber);
               String error = "";
               if (trackingTable != null)
                    if (trackingTable.size() == 0)
                         error = "true";
                    else
                         error = "false";
               else
                    error = "true";
               request.setAttribute("errorMessage", error);
               request.setAttribute("trackingTable", trackingTable);
          return mapping.findForward("success");
[/code]
5. I added the call to the function module for page orderstatusdetail.jsp in folder project_root\b2b_z\b2b\order to display a custom page Z_orderTracking.jsp in the same folder. To do this I added a link into the HTML to call a JavaScript function that passed the current order number to the /b2b/Z_orderTracking.do actionhandler mapped in the config.xml file.
So, in summary! Create an RFC; define business managers for it in the XML files; create a new Strut action and supporting Java class; create all the Java class for the managers.
I hope this makes some sense!
Gareth.

Archive - is this a new function under 10.5.3

Similar Messages

Maybe you are looking for