Archive log can not ship to GAP logfiles to standby DB automatically
we have a non-real time standby database, which will receive the archive file from the primary database server most of the time, and will apply the logfiles only at one point of time daily.
Some times, we need to shutdown the Standby DB server for a while ( 3-4 hours).
The missed logfiles will catch up during the standby down time later.
But since last week we had an storage incident, the primary DB server stops to catch up the missed logfiles, and saw this message at the archvie trace file:
ABC: tkrsf_al_read: No mirror copies to re-read data
Current, we found the archive log gaps on the standby server, and have to manually copy those logfiles over and register them.
Saw some tips on the internet to change the parameter "log_archive_max_processes", but no help for us at all.
Here is the parameter on the Primary DB server:
log_archive_dest_2 = SERVICE=Standby_server reopen=300
which will receive the archive file from the primary database server most of the timeMost times from primary. Then remaining times? so you Copy manually and register?
Then it's dataguard not an manual standby.
Error 1034 received logging on to the standby
Errors in file /******/***arc210536.trc:
ORA-01034: ORACLE not available
FAL[server, ARC2]: FAL archive failed, see trace file.these errors in primary when , stanby is down and when primary tries to connect to standby, so tese errors not considerable to investigate ,
When you don't want to apply archives on standby no need to shutdown. Just put this value log_archive_dest_state_2='defer'
Once you enable check what are the errors in primary alert log file.
How is your network band width speed? Is it capable to hold that much archive data?
May be it will take some time when you pause & start.
Also use LGWR in log_archive_dest_2 for real time apply after creatin standby redo logs.
So post the alert log information once you enable standby database.
Similar Messages
-
ORA-00339: archived log does not contain any redo
Hi All,
recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side,
after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's is 11.2.0.3,
Error in Alert Log :
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-00339: archived log does not contain any redo
ORA-00334: archived log: '/redolog2/redo/redolog3a.log'
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc (incident=190009):
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Incident details in: /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/incident/incdir_190009/DWPRD_pr0a_48412_i190009.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Slave exiting with ORA-10562 exception
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-10562: Error occurred while applying redo to data block (file# 1, block# 56702)
ORA-10564: tablespace SYSTEM
ORA-01110: data file 1: '/oradata1/database/DATAFILES/system01.dbf'
ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 2
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Mon Apr 15 11:34:12 2013
Dumping diagnostic data in directory=[cdmp_20130415113412], requested by (instance=1, osid=48412 (PR0A)), summary=[incident=190009].
ThanksHi,
"The archived log is not the correct log.
It is a copy of a log file that has never been used for redo generation, or was an online log being prepared to be the current log."
"Restore the correct log file."
Can you say, what is last changes on your database, On log files?
Did you copies your '/redolog2/redo/redolog3a.log' log file from other ?
Regards
Mahir M. Quluzade -
Archive logs are being shipped, but are not applied
Hi everyone,
Some strange things are happening when I try to configure an Oracle Data Guard setup. Currently I am at the point where the configuration has been completed, and I just need to sync the standby database to the primary one. I can see in the log files that the archive logs are being shipped, but they are not applied on the standby system.
If I run "recover standby database;" manually in sqlplus I can see that it is trying to apply an archive log which is way too old (ORA-00279: change 9656498443 generated at 04/29/2008 08:45:08 needed for thread 1).
In the alert log I can also see this error: Warning: Recovery target destination is in a sibling branch of the controlfile checkpoint. Recovery will only recover changes to datafiles.
At this point I was thinking that the standby database might be on a different incarnation compared to the primary, but this is not the case, they are both in incarnation 6:
6 6 MVF 4023175798 CURRENT 48493546257 13-06-21
Does anyone have an idea how this could happen, and how I could fix this issue?
Thanks, JM.The restore did not cause any errors to be displayed, so I assumed everything was ok.
That's fair enough.
One thing I think might cause this behaviour is that the backup on the primary database is incremental,
Yes...that may be an issue. Best bet is to re-run your standby creation.....as you are doing.
With version 11gR2 you also have the option of duplicate from active database which negates the need to copy your backupsets over to do the restore: I find it a much simpler process than the rman backup, copy files over, restore and then recover process.
http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
Something worth considering. -
Archive selection can not be maintained in SARA
Hi all,
i have done everything for deleting batches for pp consultant. but Archive selection can not be maintained as i am unable to see anything inside it.
Thanks in advance.
Vaibhav GoreHi
i am using archive object MM_SPSTOCK, then the program MMREO220N
in TEST MODE also but the result is same...tel me the detailed procedure.... -
Logical standby | archive log deleted | how to remove gap ???
hi gurus...
i have problem on logical standby
by mistake standby log coming to logical standby has been deleted , now how to fill up the gap ???
ON STANDBY
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE# APPLIED
228 674847 674872 YES
229 674872 674973 CURRENT
230 674973 674997 NO
231 674997 675023 NO
232 675023 675048 NO
233 675048 675109 NO
234 675109 675135 NO
235 675135 675160 NO
236 675160 675183 NO
237 675183 675208 NO
238 675208 675232 NO
239 675232 675257 NO
240 675257 675282 NO
241 675282 675382 NO
242 675382 675383 NO
243 675383 675650 NO
244 675650 675652 NO
245 675652 675670 NO
246 675670 675688 NO
247 675688 675791 NO
248 675791 678524 NO
archive log are shipping to standby location also and getting registered
ALERT LOG OF STANDBY
Fri May 7 12:25:36 2010
Primary database is in MAXIMUM PERFORMANCE mode
RFS[21]: Successfully opened standby log 5: '/u01/app/oracle/oradata/BEST/redo05.log'
Fri May 7 12:25:37 2010
RFS LogMiner: Registered logfile [u01/app/oracle/flash_recovery_area/BEST/archivelog/archBEST_248_1_715617824.dbf] to LogMiner session id [1]
but i dont have standby log after 229 sequence ...
ON PRIMARY
SYS@TEST AS SYSDBA> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u01/app/oracle/flash_recovery_area/TEST/standlogOldest online log sequence 247
Next log sequence to archive 249
Current log sequence 249
what to do next to apply sequences and bring both in sync.
please help me ,,,,
Edited by: user12281508 on May 7, 2010 9:45 AMthanks for response.
no its pure logical standby
i have tried to ftp the archive logs of primary to standby and applied manually
SYS@BEST AS SYSDBA> alter database register logfile '/u01/app/oracle/flash_recovery_area/BEST/archivelog/archBEST_230_1_715617824.dbf';
alter database register logfile '/u01/app/oracle/flash_recovery_area/BEST/archivelog/archBEST_230_1_715617824.dbf'
ERROR at line 1:
ORA-01289: cannot add duplicate logfile
SYS@BEST AS SYSDBA> alter database register logfile '/u01/app/home/archTEST_230_1_715617824.dbf';
alter database register logfile '/u01/app/home/archTEST_230_1_715617824.dbf'
ERROR at line 1:
ORA-01289: cannot add duplicate logfile
any other way ???? -
Archived log files not registered in the Database
I have Widows Server 2008 R2
I have Oracle 11g R2
I configured primary and standby database in 2 physical servers , please find below the verification:
I am using DG Broker
Renetly I did failover from primary to standby database
Then I did REINSTATE DATABASE to returen the old primary to standby mode
Then I did Switchover again
I have problem that archive logs not registered and not imeplemented.
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
16234
I did alter system switch logfile then I ssue the following statment to check and I found same number in primary and stanbyd has not been changed
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
16234
Any body can help please?
RegardsThanks for reply
What I mean after I do alter system switch log file, I can see the archived log files is generated in the physical Disk but when
select MAX(SEQUENCE#) FROM V$ARCHIVED_LOG;
the sequence number not changed it should increase by 1 when ever I do switch logfile.
however I did as you asked please find the result below:
SQL> alter system switch logfile;
System altered.
SQL> /
System altered.
SQL> /
System altered.
SQL> /
System altered.
SQL> SELECT DB_NAME,HOSTNAME,LOG_ARCHIVED,LOG_APPLIED_02,LOG_APPLIED_03,APPLIED_TIME,LOG_ARCHIVED - LOG_APPLIED_02 LOG_GAP_02,
2 LOG_ARCHIVED - LOG_APPLIED_03 LOG_GAP_03
3 FROM (SELECT NAME DB_NAME FROM V$DATABASE),
4 (SELECT UPPER(SUBSTR(HOST_NAME, 1, (DECODE(INSTR(HOST_NAME, '.'),0, LENGTH(HOST_NAME),(INSTR(HOST_NAME, '.') - 1))))) HOSTNAME FROM V$INSTANCE),
5 (SELECT MAX(SEQUENCE#) LOG_ARCHIVED FROM V$ARCHIVED_LOG WHERE DEST_ID = 1 AND ARCHIVED = 'YES'),
6 (SELECT MAX(SEQUENCE#) LOG_APPLIED_02 FROM V$ARCHIVED_LOG WHERE DEST_ID = 2 AND APPLIED = 'YES'),
7 (SELECT MAX(SEQUENCE#) LOG_APPLIED_03 FROM V$ARCHIVED_LOG WHERE DEST_ID = 3 AND APPLIED = 'YES'),
8 (SELECT TO_CHAR(MAX(COMPLETION_TIME), 'DD-MON/HH24:MI') APPLIED_TIME FROM V$ARCHIVED_LOG WHERE DEST_ID = 2 AND APPLIED = 'YES');
DB_NAME HOSTNAME LOG_ARCHIVED LOG_APPLIED_02 LOG_APPLIED_03 APPLIED_TIME LOG_GAP_02 LOG_GAP_03
EPPROD CORSKMBBOR01 16252 16253 (null) 15-JAN/12:04 -1 ( null) -
Archive logs are not transferred to STDBY database
Hi,
I have create a STDBY database (I am running the release 9.2.0.7.0).
I see that the archivelogs are not correctly transferred into STDBY server.
From Primary alert log, I see the following error:
ARC1: Evaluating archive log 1 thread 1 sequence 16734
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC1: Destination LOG_ARCHIVE_DEST_2 archival not expedited
ARC1: Beginning to archive log 1 thread 1 sequence 16734
Creating archive destination LOG_ARCHIVE_DEST_1: '/backup/archivelogs/log1_16734.arc'
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
Invoking non-expedited destination LOG_ARCHIVE_DEST_2 thread 1 sequence 16734 host STDBY_PROD
ARC1: Completed archiving log 1 thread 1 sequence 16734
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 14:54:42 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 14:54:42 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
ARC0: Begin FAL archive (thread 1 sequence 16483 destination STDBY_PROD)
Creating archive destination LOG_ARCHIVE_DEST_2: 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
LGWR: I/O error 3114 archiving log 2 to 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_lgwr_5265.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 15:10:08 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
I see that both archiving destinations are VALID:
SQL> select dest_id, dest_name, status from v$archive_dest_status where status != 'INACTIVE';
DEST_ID ---------- DEST_NAME -------------------------------------------------------------------------------- STATUS
1 LOG_ARCHIVE_DEST_1 VALID
2 LOG_ARCHIVE_DEST_2 VALID
SQL>
TNSPING works properly in both directions, e.g. from PROD -> STDBY:
$tnsping STDBY_PROD
TNS Ping Utility for Linux: Version 9.2.0.7.0 - Production on 17-NOV-2011 16:56:40
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
/mnt/orclEBS/oracle/proddb/9.2.0/network/admin/PROD_ebslive/sqlnet_ifile.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=EBSSTDBY) (PORT=1521)) (CONNECT_DATA=(SID=PROD)))
OK (10 msec)
Please help me to solve this issue.
Thank you.A few notes :
Troubleshooting Tips For Dataguard Switchover (9i and 10gR1) [ID 298986.1]
Although it is about Switchover, it does mandate a password file exclusive. If the switchover requires the password file, shouldn't ARCH shipping require it ?
Step By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]
also covers 9i with specific mentions of 9i differences from 10g. Passwordfile is not mentioned as different in 9i from 10g.
Data Guard 9i - Net8 Configuration for a 2-node database environment. [ID 175122.1
has log_archive_dest_2='SERVICE=NODE2STDBY.ACME.COM' so it connects to the service
*However* the document "Introduction to Oracle 9i Data Guard Manager" from
Data Guard 9i Introduction to Data Guard Manager GUI [ID 150217.1]
page 59 has this : "The creation process will attempt to create a remote login password file for the standby database to
enable remote connections to the database. (Note: A remote login password file is not necessary for
Data Guard operation; it is only needed to allow remote connections to the database from clients,
such as other Enterprise Manager tools.)"
Similarly the section "3.2.6 Set Initialization Parameters on a Physical Standby Database"
in the 9i DataGuard manual at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm#62941
only has
remote_archive_enable=TRUE
(this is an instance parameter)
Similarly the section "5.8.2.1 Primary Database Initialization Parameters"
at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/log_transport.htm#1067609
explains
The last parameter, REMOTE_ARCHIVE_ENABLE=SEND, allows the primary database to send redo data to the standby database, but prevents the primary database from receiving redo data from another system.
with REMOTE_ARCHIVE_ENABLE=RECEIVE on the Standby
to Receive and archive the incoming redo data from the primary database, but only while the database is running in the standby role
So, I guess that REMOTE_ARCHIVE_ENABLE is the important one. Not REMOTE_LOGIN_PASSWORDFILE.
In 9i : http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1174.htm#1023087
In 10g it is deprecated : http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams176.htm#sthref541 so that LOG_ARCHIVE_CONFIG is used.
(and no longer appears in the 11.2 Reference)
Hemant K Chitale -
Archive Logs Will Not Delete from OS
Hi Everyone,
Here's my issue. Somehow i have a few archivelogs that are corruptued, plus a backup of the database that is corrupted. Since then, I have made a new backup of the database and everything is running smoothly. WHen i try to delete the files from DISK (which i cannot delete), i get this error: CANNOT DELETE <file_name>: The file or directory is corrupted and unreadable. I try to search for the corrupted files in rman, but i get this message "specification does not match any archived log in the recovery catalog". It seems that rman doesn't recognize that the files exist.
I go to the alert log and I have this error:
Corrupt block seq: 10511 blocknum=1.
Bad header found during deleting archived log
Data in bad block - seq:0. bno:0. time:0
beg:0 cks:0
calculated check value: 0
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
I would really appreciate some help to delete these files from the OS. Thanks in advance to anyone that can help.RMAN> Change Archivelog All Validate;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=363 device type=DISK
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_04\O1_MF_1_10514_6F6SJ9D6_.ARC RECID=11389 STAMP=734220234
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10546_6FDRCHQX_.ARC RECID=11421 STAMP=734412064
validation succeeded for archived log
archived log file name=\APP\ORACLE\FLASH_RECOVERY_AREAPPROD\ARCHIVELOG\2010_11_07\O1_MF_1_10556_6FGTGZNJ_.ARC RECID=11431 STAMP=734479760
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10557_6FGX6CG5_.ARC RECID=11432 STAMP=734482556
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10558_6FGZ9SLK_.ARC RECID=11433 STAMP=734484714
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10559_6FH12R00_.ARC RECID=11434 STAMP=734486537
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10560_6FH6OJRW_.ARC RECID=11435 STAMP=734492259
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10561_6FHL3J98_.ARC RECID=11436 STAMP=734503969
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10562_6FHTF2QX_.ARC RECID=11437 STAMP=734512468
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10563_6FJ32ZSD_.ARC RECID=11438 STAMP=734521361
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10564_6FJB1OMK_.ARC RECID=11439 STAMP=734528486
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10565_6FJJH3TV_.ARC RECID=11440 STAMP=734535062
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10566_6FJKJ6PY_.ARC RECID=11441 STAMP=734536118
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10567_6FJV244W_.ARC RECID=11442 STAMP=734545911
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10568_6FK5BMYR_.ARC RECID=11443 STAMP=734556421
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10569_6FK68QRW_.ARC RECID=11444 STAMP=734557384
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10570_6FKDM74D_.ARC RECID=11445 STAMP=734563863
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10571_6FKGK4LK_.ARC RECID=11446 STAMP=734565848
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10572_6FKH42MK_.ARC RECID=11447 STAMP=734566452
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10573_6FKOQX6C_.ARC RECID=11448 STAMP=734573238
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10574_6FKVHC8S_.ARC RECID=11449 STAMP=734579100
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10575_6FL6T300_.ARC RECID=11450 STAMP=734590708
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10576_6FLJ3NMK_.ARC RECID=11451 STAMP=734600229
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10577_6FLO72K2_.ARC RECID=11452 STAMP=734605459
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10578_6FLTF31G_.ARC RECID=11453 STAMP=734610772
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10579_6FM1N500_.ARC RECID=11454 STAMP=734618166
Crosschecked 26 objects -
A Group of Archive Logs Will Not Backup
I restored a database to a different server, and while that was happening I copied some logarchives out of the production logarchive directory. After the restore completed, but before I put those logarchives back into that directory, I ran CHANGE ARCHIVELOG ALL CROSSCHECK on the production server to sync the catalog with the database. That was a mistake to do that yet. I then put the logarchives back into the production logarchive directory and tried to run a logarchive backup. I should have put these files back before running crosscheck. Now I receive this error:
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
How can I backup these production logarchives that I copied back into the logarchive directory?
Thank you.Database version? To know that makes it easier to advice, because since RMAN was introduced in 8.0 there were some changes.
In 10g and higher use 'catalog archivelog...'.
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230
Werner -
After run-sa.sh start,why NQServer.log can not find?
I have install BIEE with advanced install,after startup the db and ias,then start biee,when run run-sa.sh,after that,can not create NQServer.log ,seems the biee server did'nt startup,why?
$ /3510/BIEE/BI/OracleBI/setup/run-sa.sh start
Oracle BI Server startup initiated.
Please wait for a while for the Oracle BI Server to completely start.
Execute the following command to check the Oracle BI Server logfile and see if it started.
tail -f /3510/BIEE/BI/OracleBI/server/Log/NQServer.log
$ ls -l /3510/BIEE/BI/OracleBI/server/Log/NQServer.log
/3510/BIEE/BI/OracleBI/server/Log/NQServer.log: No such file or directoryIs there anything else on the /3510/BIEE/BI/OracleBI/server/Log/ directory?
-
To Archive Log or Not to Archive Log
I was recently in a discussion w/ a senior oracle dba who said that you shouldn't run your database in archive log mode if it is possible to take a complete cold backup each night. His recommendation was to have large enough redo logs where, in a days time, they wouldn't be overwritten by log switches. Are there any opinions out there on this?
Thanks.This option depends on requirements on your DB.
If your DB is in production state and must be running 24x7 and also data loss is not acceptable then best backup strategy is hot backups with RMAN (this option requires Archivelog mode).
If your DB is not in production and data loss is acceptable then cold backup is enough but this backup strategy has some disadvantages. -
Generate archive logs are not in sequence number?
On last friday... the latest archive log number was ARC00024.ARC. Tomorrow when I come backup, the archive logs ARC00001.ARC and ARC00002.ARC were being generated by oracle itself. I wondering the archive log sequence should be in sequence. What is happening?
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\oracle\ora92\RDBMS
Oldest online log sequence 1
Next log sequence to archive 3
Current log sequence 3
SQL>
FAN
Edited by: user623471 on Jun 7, 2009 7:35 PMkhurram,
Its our production instance and havent issued resetlogs option but when listing the arvchives it shows in different sequence number...
and also while copying the archives by RMAN it doesnt copy in sequence
-rw-r----- 1 xxx dba 69363859 May 28 19:16 2_10373.arc.gz
-rw-r----- 1 xxx dba 43446622 May 28 19:16 1_10553.arc.gz
-rw-r----- 1 xxx dba 52587365 May 28 19:16 1_10578.arc.gz
-rw-r----- 1 xxx dba 45251820 May 28 19:16 1_10543.arc.gz
-rw-r----- 1 xxx dba 60890256 May 28 19:17 1_10579.arc.gz
-rw-r----- 1 xxx dba 46659008 May 28 19:17 1_10548.arc.gz
-rw-r----- 1 xxx dba 116899466 May 28 19:17 2_10353.arc.gz
-rw-r----- 1 xxx dba 77769517 May 28 19:17 1_10531.arc.gz
-rw-r----- 1 xxx dba 66401923 May 28 19:18 1_10530.arc.gz
-rw-r----- 1 xxx dba 45972697 May 28 19:18 1_10605.arc.gz
-rw-r----- 1 xxx dba 55082543 May 28 19:18 1_10600.arc.gz
-rw-r----- 1 xxxq dba 42682207 May 28 19:19 1_10547.arc.gz
thanks,
baskar.l -
I have a primary database that need to import large amount of data and database objects. 1.) Do I shutdown the standby? 2.) Turn off archive log mode? 3.) Perform the import? 4.) Rebuild the standby? or is there a better way or best practice?
Instead of rebuilding the (whole) standby, you take an incremental (from SCN) backup from the Primary and restore it on the Standby. That way, if, for example
a. Only two out of 12 tablespaces are affected by the import, the incremental backup would effectively be only the blocks changed in those two tablespaces (and some other changes in system and undo) {provided that there are no other changes in the other ten tablespaces}
b. if the size of the import is only 15% of the database, the incremental backup to restore to the standby is small
Hemant K Chitale -
Archived Log is not shifting from Primary to DR
we have increase the table size without taking care of DR, so
sapdata1 becomes 100% at DR site after that applying archived had
stopped at DR, after that i manually added datafile using following
commands,
select * from v$recover_file where error like '%FILE%';
Primary-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/sapdata1/sr3_21/sr3.data21
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/sapdata1/sr3_22/sr3.data22
alter system set standby_file_management =Manual;
DR-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/102_64/dbs/UNNAMED00033
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/102_64/dbs/UNNAMED00034
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00033'
as '/oracle/BP1/sapdata1/sr3_21/sr3.data21';
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00034'
as '/oracle/BP1/sapdata1/sr3_22/sr3.data22';
alter system set standby_file_management =Auto;
alter database recover managed standby database disconnect from
session;
after that all logfile which is available at DR is applied but now
automatic shifting from primary to DR is not happen, please check and
provide the solution as early as possible because if log gap increase
we have to go for backup and restore and our DR site is so far.Dear Orkun Gedik ,
Please find the Aler Log-:
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Thu Aug 11 18:39:53 2011
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Clearing online redo logfile 1 complete
Please find the log for bp1_mrp0_20361.trc
Start recovery at thread 1 ckpt scn 232442669 logseq 4297 block 2
2011-08-11 18:39:53.881
Media Recovery add redo thread 1
2011-08-11 18:39:53.881 1180 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
2011-08-11 18:39:53.891 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 /oracle/BP1/origlogA/log_g11m1.dbf
ORA-00313: open failed for members of log group 1 of thread 1
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Error 19527 creating/clearing online redo logfile 1
2011-08-11 18:39:53.950 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 complete
2011-08-11 18:39:53.960 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Media Recovery Waiting for thread 1 sequence 4297 -
PAYROLL ARCHIVE PROCESS CAN NOT SEEN ON THE REQUEST SET FOR SUBMIT
Dear all
kindly please i need your help.
i was on the payroll process running.
i have run payroll run--->PrePayment--->Payroll Archiver not found.
Kindly please suggest any......what should i done.It's not possible with this setup. You have connected the E3000 LAN-LAN. With this setup you cannot set a gateway address on the E3000. Thus all it knows about is the connected LAN. Nothing else. You cannot access the E3000 from anywhere but your LAN subnet 192.168.0.*.
Maybe you are looking for
-
How can i get my itunes songs to my new computer
How can I get my itunes songs from my old computer to my new one?
-
How to print CWiGraph control in white background and different font?
I have a CWiGraph control in dialog. I look at your example for printing the CWiGraph control, but I don't want print the exact image like showing on the screen, I like to print the graph in white background, not the same color like graph frame and p
-
Import Format script required to work across multiple fields
I am currently constructing an Import Format, and using datapump import scripts on several of the fields to implement specific logic based on the values present. For example: Function TBNetwork(strField, strRecord) If Left(strField, 1) = "N" Then TBN
-
In a competitor's product, I am able to set the schema location and name of the PLAN_TABLE in the preferences. This is important because there is no shared PLAN_TABLE in the databases I use. Is there a way to point SQL Developer to the PLAN_TABLE in
-
PS CS4 crash when attempting to view preferences
Hi all, I'm running Photoshop CS4 on Windows XP (32bit). Photoshop itself seems to work fine, but if I try to view certain menus such as preferences, it will display the "CS4 has encountered an error and needs to close" message before crashing out.