Archive notification
Hi PM Experts,
I have one Object PM_QMEL (Archive notification).I created a new notification(status NOCO)now i have to archive that notification so i use following steps,
< tcode SARA>
<Shedule preprocessing>
<maintain varient for it>
<Define start date as immediate>
<spool parameter>
<execute >
<system has created newprocessing job>
<write "create archive files">
<maintain varient for it>
<Generate archive file>
<Define start date as immediate>
<spool parameter>
<execute>
<Archive job was schedule>
<Execute delet program>
when i go for this step execute delete program in tab Archive selection i didn't get any data
Can any body tell me which step i miss so that i didn't get data under Archive selection tab
Edited by: pankaj mohite on Jan 30, 2009 8:55 AM
Hi,
What is residence time 1 and 2 set for notification object in config.Residence time 1 refers to selecting those notification having DLFL status set and that time has elapsed.Residence time 2 refers to time elapsed from deletion indicator set(at end of Residence time1) and if any record falls within and beyond this limit it will get archived.This time is time DLFL set for record to batch job run time and this refers to residence time 2.Records satisfying these conditions will get archived.So check on these parameters.
As while executing delete program you ar enot getting records ,this indicates above conditions are satisfied.
rgds,
atul
Edited by: Atul Mali on Mar 1, 2009 1:19 PM
Similar Messages
-
Archive notification to the file system
We attached some documents (e.g. email w/ screen shots) in txn QM03.
We need to archive those notifications w/ their attachment, including the screens if they have screens.
1) we do not know the related archiving objects;
2) even we know the archiving objects, we are not sure if the attached screens would be archived;
3) we can only archive them into file systems since not other storage is available.
Your advise to solve these problems are appreciated.
Thanks a lotHi,
1. You can use archive object QM_QMEL to archive quality notifications. Please refer to the SAP documentation for pre-requisites and dependencies:
Link:[http://help.sap.com/saphelp_erp60_sp/helpdata/en/e0/bc963457885f2ee10000009b38f83b/frameset.htm]
2. As i know, the attachments created using GOS will not be archived along with the notification. These attachments are stored in database tables itself and only a link is available to the notification. Please refer to note 530792 for more info on where the attachments are stored.
3. Notifications (using SARA) can be archived into the filesystem
Hope this helps,
Naveen -
PM Notification archiving -clarification -reg
HI,
While planning for PM notifications archiving , io the preprocessing step of the tcode SARA , we dont find any reference date .
We need to archive notification which are changed before two years
we can take the details from QMEL like table and input in SARA , but going forward we need to schedule back ground jobs for the notifications archiving
do we need to do customization soem where to get the option of date here in the preprocessing stpe ?
now we have only
notification type
notification number
equipment
functional location
where as in the case of PM orders (object :PM_ORDER) we have the DLFl date or change date as reference
pl suggest
regards,
Madhu KiranHi,
For PM Orders and Notifications two flags need to be set: deletion flag and deletion indicator.
For PM Order, the pre-processing variant can set both: deletion flag and deletion indicator.
For PM Notification, the pre-processing variant can only set the second one: deletion indicator. Hence, you can either manually set the deletion flag or create a custom program to set this deletion flag for you. Then SAP will analyse (in the pre-processing program), those notifications flagged for deletion and set the deletion indicator if possible.
After this, the write archiving program will pick up those notifications with deletion indicator set and archive them.
Hope this makes sense now. -
Archive service notification and service orders
Hello
We need to remove few service notification and service orders from the system.These were created by mistake and now we want to remove those orders and notificaiton from the system
Please explain with required transactions.
Regards
SantoshCheck preconditions for archiving notification :
1) The notification has been marked as u201Ccompletedu201D in Change Notification.
To archive notifications, go to transaction SARA. The archiving object for Notification is NM_QMEL.
Click on the Write button in the initial screen of Archive Administration to start an archive session of archiving notifications.
RQARCNMA u2013 Archive Notifications
RQARCNMD u2013 Delete Notifications
hope that your problem will be solved. -
Hello everybody,
I know my question isn't a new one but my search didn't help me to find any helpful information. I encounter a error during an attempt to send a notification
<BEA-000000> <Can't send due to NotificationResolverNotFoundException>
oracle.iam.notification.exception.NotificationResolverNotFoundException: Cannot find resolver for {0}.
at oracle.iam.notification.impl.NotificationServiceImpl.processContentTags(NotificationServiceImpl.java:401)
at oracle.iam.notification.impl.NotificationServiceImpl.getMessageContent(NotificationServiceImpl.java:364)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:543)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:272)
at sun.reflect.GeneratedMethodAccessor3975.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
... skipped
I created a custom Event (example taken on the Internet)
<?xml version="1.0" encoding="UTF-8"?>
<Events xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="../../../metadata/NotificationEvent.xsd">
<EventType name="Demo Notification Event">
<StaticData>
<Attribute DataType="X2-Entity" EntityName="User" Name="User Login"/>
<Attribute DataType="91-Entity" EntityName="User Group" Name="User Grp"/>
</StaticData>
<Resolver class="com.oracle.demo.oim.notification.DemoNotificationEventResolver">
<Param DataType="X2-Entity" EntityName="User" Name="usr_login"/>
</Resolver>
</EventType>
</Events>
plugin.xml looks like
<?xml version="1.0" encoding="UTF-8"?>
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint="oracle.iam.notification.impl.NotificationEventResolver">
<plugin pluginclass= "com.oracle.demo.oim.notification.DemoNotificationEventResolver"
version="1.0"
name="Demo Event Resolver"/>
</plugins>
Here is the content of a plugin zip file
[oracle@IAM Notifications]$ unzip -lvf Notifications.zip
Archive: Notifications.zip
Length Method Size Ratio Date Time CRC-32 Name
0 Stored 0 0% 11-14-13 13:14 00000000 META-INF/
0 Stored 0 0% 11-14-13 13:12 00000000 lib/
625 Defl:N 316 49% 11-14-13 13:14 93eae5ae META-INF/DemoEvent.xml
2330 Defl:N 1685 28% 11-14-13 13:14 fecbe9d4 lib/Notifications.jar
394 Defl:N 219 44% 11-14-13 13:14 47923fad plugin.xml
3349 2220 34% 5 files
I simplified a Notification Template to exclude any parameters from it so it's just a static HTML with the name "Manager not set"
Here is my code to fire up that notification
private void prNoManagerSet( String strUserId ) throws EventException,
UnresolvedNotificationDataException,
TemplateNotFoundException,
MultipleTemplateException,
NotificationResolverNotFoundException,
UserDetailsNotFoundException,
NotificationException {
//TODO sent notification email to Distribution list
NotificationService notService = Platform.getService(NotificationService.class);
NotificationEvent notEvent = new NotificationEvent();
notEvent.setSender(null);
notEvent.setUserIds( strDL );
notEvent.setTemplateName("Manager not set");
HashMap<String, Object> params = new HashMap<String, Object>();
params.put("user_login", strUserId);
notEvent.setParams(params);
notService.notify(notEvent);
logger.warning(String.format("Manager for user #%s is not set", strUserId));
Any help will be very valuable! Thank you in advance.Did you follow the deploying steps and import the xml file into the MDS repository?
Developing Notification Events - 11g Release 2 (11.1.2.1.0)
-Kevin -
can anybody tell hw many QM Tables and T codes are ther in total approx.
and if possible which r imp. one?atleast tables.
thnxDear Sandip,
<b>Important QM Tables</b>
Area Table Description
Master Data QMAT Inspection type - material parameters
Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Master Data QPAC Inspection catalog codes for selected sets
Master Data QPAM Inspection catalog selected sets
Master Data QPMK Inspection characteristic master
Master Data QPMT Master Inspection Characteristics Texts
Master Data QPMZ Assignment table - insp. methods/master insp. characteristic
Master Data TQ01D Authorization groups for QM master data
Master Data TQ01E Text authorization groups for QM master data
Master Data TQ21 Assignment of screens to screen groups
Master Data TQ25 QM:screen sequence for master and inspection characteristics
QM Master Data
Catalog QPCD Inspection catalog codes
Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Catalog
Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules
Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts
Sample Determination QDPA Sampling scheme-instructions
Sample Determination QDPK Sampling scheme header
Sample Determination QDPKT Sampling scheme: texts
Sample Determination QDPP Sampling scheme item
Sample Determination QDQL Quality level
Sample Determination
Inspection Char TQ17A Weighting of Char
Inspection Char TQ11 Inspection Qualification
Inspection Char TQ29 Tolerance Keys
Inspection Char T006 Unit of measurement
Inspection Char
Dynamic Modification QDBM Valuation mode
Dynamic Modification QDBMT Valuation Mode: Texts
Dynamic Modification QDDR Dynamic modification rule (header)
Dynamic Modification QDDRT Dynamic modification rule: texts
Dynamic Modification QDEP Allowed inspection severities
Dynamic Modification QDEPT Allowed Inspection Severities: Texts
Dynamic Modification QDFB Function modules for the individual procedure categories
Dynamic Modification QDFBT Function Modules for Procedure: Texts
Dynamic Modification QDFM Function modules for valuation mode
Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts
Dynamic Modification QDPS Inspection stages for a dynamic modification rule
Dynamic Modification QDPST Inspection Stages: Texts
Dynamic Modification QDSA Sampling type
Dynamic Modification QDSAT Sampling Type: Texts
Dynamic Modification QDSV Sampling procedure
Dynamic Modification QDSVT Sampling Procedure: Texts
Dynamic Modification TQ39B QM : Activates reference for dyn. modification level
Dynamic Modification
Graphics & SPC QASH Quality control chart
Graphics & SPC QAST Control chart track
Graphics & SPC QPSH Control chart types
Graphics & SPC QPSHT Texts for control chart types
Graphics & SPC QPSP SPC criterion
Graphics & SPC QPSPT Texts for SPC criteria
Graphics & SPC QPST Control chart track
Graphics & SPC QPSTT Texts for control chart tracks
Graphics & SPC
Specifications QMSP QM: material specification
Specifications
Inspection Plan PLKO Inspection plan Header
Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6)
Inspection Plan TQ29A Dependency tolerance key - nominal measurement
Inspection Plan TQ72 Type of share calculation
Inspection Plan TQ72T Texts for type of share calculation
Inspection Plan TQ75 QM formula parameters
Inspection Plan TQ75F Field names for QM formulas
Inspection Plan TQ75K Short text for Table TQ75F
Inspection Plan TQ75T Description of formula parameters
Inspection Plan
Qm in procurement QINF QM-info record for material and vendor
Qm in procurement TQ02 QM system definition
Qm in procurement TQ02A QM system assignment and QM system requirements
Qm in procurement TQ02B QM system
Qm in procurement TQ02T QM system description
Qm in procurement TQ02U Description QM system
Qm in procurement TQ04A Functions that can be blocked
Qm in procurement TQ04S QM block functions : texts
Qm in procurement TQ05 QM certificate categories for procurement
Qm in procurement TQ05T QM: text table for certificate types
Qm in procurement TQ08 Control of QM in procurement
Qm in procurement TQ08T QM: text for QM procurement keys
Qm in procurement TQ09 QM: agreement of QM document types
Qm in procurement TQ09T QM: agreement of QM document types
Qm in procurement TQ32A Inspection type to status assignment from status profile
Qm in procurement
QM in SD QVDM QM Info Record - QM Control in SD
QM in SD TQ32B Find insp.type for quality insp. for delivery note
QM in SD
Inspectio lot QALS Inspection lot record
Inspectio lot QALT Partial lot
Inspectio lot T156Q Movement Type: Material-Independent Control
Inspectio lot TQ30 Inspection types
Inspectio lot TQ30T Texts for inspection types
Inspectio lot TQ32 Assignment of inspection type to origin
Inspectio lot TQ32C Lot creation allowed values for the origin
Inspectio lot TQ32C _T Texts for lot creation indicator
Inspectio lot TQ33 Relevant fields for origin
Inspectio lot TQ34 Default values for inspection type
Inspectio lot
Inspection point QAPP Inspection point
Inspection point TQ79 Table with inspection point/user field combinations
Inspection point TQ79T Key words for inspeciton point user fields
Inspection point
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording
Defects recording TQ84 Confirmation profile
Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Defects recording
Usage decision QAMB QM: Link Between Inspection Lot and Material Document
Usage decision QAVE Inspection processing: Usage decision
Usage decision TQ06 Procedure for Calculating the Quality Score
Usage decision TQ06T Language-specific texts for Table TQ06
Usage decision TQ07M QM: Inventory postings with usage decision
Usage decision
Sample Mgmt QPRN Sample drawing of phys. samples
Sample Mgmt QPRS Master record for phys. samples
Sample Mgmt QPRVK Sample-drawing procedure
Sample Mgmt QPRVK T Header for sample drawing procedure texts
Sample Mgmt QPRVP Sample-drawing items
Sample Mgmt QPRVP T Items for sample drawing procedure texts
Sample Mgmt TQ40 Definition of sample types
Sample Mgmt TQ40T Text table for sample type
Sample Mgmt TQ41 Storage locations for physical samples
Sample Mgmt TQ41T Texts for storage locations
Sample Mgmt TQ42 Physical sample containers
Sample Mgmt TQ42T Texts for phys. sample containers
Sample Mgmt
QMIS S068 Vendor statistics
QMIS S069 Material statistics
QMIS S097 QM notifications: Matl anal.
QMIS S098 QM notification: Vendor anal.
QMIS S099 QM notifications: Cust. anal.
QMIS S100 Problems: Material analysis
QMIS S102 Problems: Vendor analysis
QMIS S103 Problems: Customer analysis
QMIS S104 Customer statistics
QMIS S161 Inspection results: General
QMIS S162 Quantitative insp. results
QMIS S163 Quant. Insp. Result: Vendor
QMIS S164 Quant. Insp. Result: Vendor
QMIS S165 Inspection result: gen. custs
QMIS S166 Insp. Results: Quant. Customer
QMIS TQ55 Assign inspection lot origin for update group
QMIS TQ56 Definition of quality score classes
QMIS TQ56T Text table for the definition of quality score classes
QMIS TQ57 Assignment of quality score key to info structure
QMIS
Quality Certificates QCPR QM quality certificates in procurement
Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types
Quality Certificates
Quality Notification QMEL Notification header
Quality Notification QMFE Item
Quality Notification QMSM Task
Quality Notification QMMA Activities
Quality Notification T352C Catalog types for each catalog profile
Quality Notification TQ81 Notification Scenario
Quality Notification TQ81V Usage of parts
Quality Notification TQ81V_T Texts for usage of parts
Quality Notification TQ81_T Texts for Notification Scenarios
Quality Notification TQ82 Change of Notification Type
Quality Notification TQ83 Partner Functions for Codes
Quality Notification TQ85 Function table for follow-up functions
Quality Notification TQ85R Rules for Follow-Up Functions
Quality Notification TQ85_T Action box text table
Quality Notification TQ8CO Assignment of reference orders to notification type
Quality Notification
Other Objects MARA Material Number
Other Objects T001W Plant
Other Objects LFA1 Vendor
Other Objects KNA1 Customer
Other Objects AUFK Order Number
Other Objects SAFK Run Schedule Header Number
Other Objects MCH1 Batch Number
Other Objects MCHA Batch Record
Other Objects EKKO Purchasing Document Header
Other Objects EKPO Purchasing document Item
Other Objects EKET Delivery Schedule
Other Objects VBUK Delivery Header
Other Objects VBUP Delivery Item
Other Objects CSKS Cost Center
Other Objects EQUI Equipment Number
<b>Transaction List:</b>
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
Hope this will help.
Regards,
Naveen. -
hi SAP gurus.. can u send me the SAP PP and QM configuration Tcodes.
nithyaDear Nithyaseelan,
Please find list of PP & QM codes
PP
MATERIAL
CREATE-GENERAL MM01 IMMEDIETELY
MM11 SCHEDULE
CHANGE MM02 IMMEDIETELY
MM12 SCHEDULE
MM13 ACTIVATE
FLAG FOR DELETION MM06 IMMEDIETELY
MM16 SCHEDULE
DISPLAY MM03 DISPLAY CURRENT
MM19 DISPLAY AT KEY DATE
DISPLAY CHANGES MM04 ACTIVE CHANGES
MM14 SCHEDULE CHANGES
MM17 MASS MAINTENANCE
MMAM CHANGE MATERIAL TYPE
OTHER MMBE STOCK OVERVIEW
MMPV CLOSE PERIOD
MMRV ALLOW POSTING TO
PREVIOUS PERIOD
MM50 INSTANT MATERIAL VIEW
MMSC ENTER STORAGE LOCATIONS
MM60 MATERIAL LIST
ARCHIVING(MATERIAL) MM71 ARCHIVE/DELETE
MM72 DISPLAY ARCHIVE
BILL OF MATERIAL (MATERIAL BOM)
CS01 CREATE
CS02 CHANGE
CS03 DISPLAY
EXTRAS CS28 ARCHIVING
CS20 MASS CHANGES
EVALUATION/BOM CS11 BOM MULTILEVEL
EXPLOSION/MATERIAL CS12 STRUCTURE MULTILEVEL
BOM CS13 SUMMURISED BOM
WORK CENTRES
CR01 CREATE
CR02 CHANGE
CR03 DISPLAY
CA85 REPLACE
CAPACITY CR11 CREATE
CR12 CHANGE
CR13 DISPLAY
HIERARCHY CR21 CREATE
CR22 CHANGE
CR23 DISPLAY
LINE HIERARCHY LDB1 CREATE
LDB2 CHANGE
LDB3 DISPLAY
REPORTING CR60 W/C INFORMATION SYSTEM
CR05 W/C LIST
CR06 COST CENTRE ASSIGNMENT
CR07 W/C CAPACITIES
CR08 W/C HIERARCHY
WHERE USED CA80 WORK CENTRE
CR15 CAPACITY
CR10 CHANGE DOCUMENTS
EXTRAS CR09 STD. TEXTS TASK LIST
CR41 ARCHIVING
ROUTING
STAD. ROUTING CA01 CREATE
CA02 CHANGE
CA03 DISPLAY
REF. OPERATION SETS CA11 CREATE
CA12 CHANGE
CA13 DISPLAY
RATE ROUTING CA21 CREATE
CA22 CHANGE
CA23 DISPLAY
REF. RATE ROUTING CA31 CREATE
CA32 CHANGE
CA33 DISPLAY
EXTRAS CA85 REPLACE W/C
MASS CHANGES CA95 REPLACE REF. OP. SET
CA75 REPLACE PRT
DELETE TASK LIST CA99 WITH ARCHIVING
CA98 W/O ARCHIVING
REPORTING CA80 WORK CENTRE
WHERE USED LIST CA90 REF. OP. SETS
CA70 PRODUCTION RESORCE TOOLS
COST CENTRE
OKKP MAINTAIN CONTROLLING AREA
KS01 CREATE COST CENTRE
KZS2 CREATE COSTING SHEET
KA01 CREATE PRI. COST ELEMENT
KA06 CREATE SEC. COST ELEMENT
KL01 CREATE ACTIVITY TYPE
KP26 ACTIVITY TYPE/PRICE PLANNING
SALES AND OPERATIONS PLANNING
PRODUCT GROUP MC84 CREATE
MC86 CHANGE
MC85 DISPLAY
GRAPHIC MC91 PRODUCT GROUP
MC92 OVERVIEW
PLANNING MC81 CREATE
FOR PRODUCT GROUP MC82 CHANGE
MC83 DISPLAY
MC75 TRANSFER PG TO PLANNING
FOR MATERIAL MC87 CREATE
MC88 CHANGE
MC89 DISPLAY
MC74 TRANSFER MATERIALS TO DM
MC9K MATERIAL AVAILABILITY
VERSION MANAGEMENT MC78 COPY
MC80 DELETE
FLEXIBLE PLANNING MC93 CREATE
PLANNING MC94 CHANGE
MC95 DISPLAY
MC9K MATERIAL AVAILABILITY
TOOLS/PLANNING TYPE MC8A CREATE
MACRO MC8B CHANGE
MC8C DISPLAY
EVENT MC64 CREATE
MC65 CHANGE
MC66 DISPLAY
ROUGH CUT PLANNING MC35 CREATE
PROFILE MC36 CHANGE
MC37 DISPLAY
ENVIRONMENT MC90 TRANSFER MATERIALS TO DM
ACTIVITY REQT. KSPP TRANSFER TO COST CENTRE
KSBL COST CENTRE OLANNING REPORT
KSOP TRANSFER TO ACTIVITY BASED COSTING
CPBL PLANNING REPORT PROCESSES
MC9C REPORTING
SETTINGS MC96 FORECAST PROFILE
DISSAGGRIGATION MC76 BREAKDOWN PG PLAN
MC77 DISPLAY PG PLAN
MC75 TRANSFER PG TO PLANNING
MC74 TRANSFER MATERIALS TO DM
FORECASTING
INDIVIDUAL FORECAST MP30 EXECUTE
MP31 CHANGE
MP32 DISPLAY
TOTAL FORECAST MP38 EXECUTE
MP33 REPROCESS
MP39 PRINT
MPBT EXECUTE BACKGROUND
MPDR PRINT BACKGROUND
DEMAND MANAGEMENT
PIR MD61 CREATE
MD62 CHANGE
MD63 DISPLAY
MD65 REQTS. FOR SCINARIO
MD66 COPY SIMULATED DEPENDENT REQT.
MD70 COPY TOTAL FORE CAST
EVALUATION MD73 DISPLAY TOTAL REQT.
MD79 EXCELL INTERFACE
MD4C ORDER REPORT
MD72 CHARECTERISTICS PLANNING
CUSTOMER REQT. MD81 CREATE
MD82 CHANGE
MD83 DISPLAY
REPETITIVE MANUFACTURING
MASTER DATA C223 PRODUCTION VERTION
PRODUCT COST PLANNING
COSTING RUN CKMATSEL CREATE
SELECTION LIST CKMATCON Edit
CK40N EDIT COSTING RUN
Material Requirement Planning
Menu Nodes TransactionActivity
Master Data MD25 Create planning calendar
MD26 Change planning calendar
MD27 Display planning calendar
MDSA Display BOM explosion number
MDSP Edit BOM explosion number
MEQ1 Maintain quota file
OPPP Explode BOM by date
MDUS Display project assignment
MDUP Process project assignment
MDL1 Create production lot
MDL2 Change production lot
MDL3 Display production lot
Planning MD20 Create planning file entry
MD21 Display planning file entry
MDAB Set up planning file entry in background
MDRE Check planning file entry
MD01 Total planning online
MDBT Total planning in background
MD03 Single-item, single-level planning
MD02 Single-item, multi-level planning
MD43 Interactive single-item planning
MD50 Multi-level, make-to-order planning
MD51 Multi-level project planning
MF52 Display planning table
MF50 Change planning table
MF57 Planning table by MRP lists
MF51 Planning table by production list
Evaluations MD04 Stock/requirements list
MD07 Collective access of stock/requirements lis
MD05 MRP list
MD06 Collective access of MRP lists
MDLD Print MRP list
MD45 Planning result
MD46 Collective access of planning result
MD44 Planning situation for a material
MD47 Planning situation for a product group
MD48 Cross-plant planning situation
MD4C Order report
MD09 Pegged requirements
CO46 Order progress
Planned Order MD11 Create planned order
MD12 Change planned order
MD13 Individual access of planned order
MD16 Collective access of planned orders
MD14 Individual conversion of planned order into
MD15 Collective conversion of planned orders int
MDUM Convert planned order into purchase requisi
CO40 Convert individual planned order into produ
CO41 Collective conversion of planned orders int
CO48 Partial conversion of planned order into pr
COR7 Individual conversion of planned order into
COR7_PC Collective conversion of planned orders int
COR8 Partial conversion of planned order into pr
MDVP Collective availability check
MDAC Execute action for planned order
LONG TERM PLANNING
PALNNING SCENARIO MS31 CREATE
MS32 CHANGE
MS33 DISPLAY
PLANNING RUN MS01 ON LINE
MSBT SA BACKGROUND JOB
MS02 SINGLE ITEM - MULTI LEVEL
MS03 SINGLE ITEM - SINGLE LEVEL
MS50 SINGLE ITEM - SALES ORDER
MS51 SINGLE ITEM PLANNING, PROJECT
MFSO PLANNING TABLE
EVALUTIONS MS05 MRP LIST MATERIAL
MS06 MRP LIST COLLECTIVE DISPLAY
MSLD PRINT MRP LIST
MS04 STOCK/REQUIREMENTS LIST
MS07 STOCK/REQUIREMENT LIST COLLECTIVE DISPLAY
MS44 PLANNING SITUATION MATERIAL
MS47 SITUATION PRODUCT GROUP
MPS-MASTER SCHEDULE ITEMS
TOTAL PLANNING MD40 ON LINE
MDBS SA BACKGROUND JOB
MD41 SINGLE ITEM - MULTI LEVEL
MD42 SINGLE ITEM - SINGLE LEVEL
MD43 SINGLE ITEM - INTERACTIVE
MD50 SINGLE ITEM - SALES ORDER
MD51 SINGLE ITEM PLANNING, PROJECT
EVALUTION IS SIMILAR TO MRP
PRODUCTION CONTROL
ORDER - CREATE CO01 WITH MATERIAL
CO07 WITHOUT MATERIAL
CO40 FROM PLANNED ORDER
CO41 COLLECTIVE CONVERTION OF PLANNED ORDER
CO08 FOR SALES ORDER
CO10 FOR PROJECT
CO02 CHANGE
CO03 DISPLAY
CONTROL MD04 STOCK/REQUIREMENTS LIST
COHV MASS PROCESSING
COMAC COLLECTIVE AVAILABILITY CHECK
CO05N COLLECTIVE RELEASE
CO04N PRINT
CO09 AVAILABILITY OVER VIEW
GOODS MOVEMENT MF65 STOCK TRANSFER FOR RESERVATION
MATERIAL STAGING MF68 LOG
MB1A GOODS ISSUE
MB31 GOODS RECEIPT
COWBPACK PACK MATERIAL
CONFIRMATION CO1V TIME TICKET
FOR OPERATION CO14 DISPLAY
CO13 CANCEL
CO1L REQUESTED CONFIRMATIONS
CO1P PREDEFINED PROCESSES
TOOLS-ARCHIVING CO78 ORDER
KOAA SETTELMENT DOCUMENTS
CAPACITY PLANNING
EVALUTION CM01 LOAD
WORK CENTER VIEW CM02 ORDERS
CM03 POOL
CM04 BACKLOG
CM05 OVERLOAD
CM07 VARIABLE
EXTENDED EVALUTION CM50 WORK CENTER VIEW
CM51 INDIVIDUAL CAPACITY VIEW
CM52 ORDER VIEW
LEVELLING CM21 PLANNING TABLE (GRAPHICAL)
WORK CENTER VIEW CM22 PLANNING TABLE (TABULAR)
INDIVIDUAL CAPACITY VCM27 PLANNING TABLE (GRAPHICAL)
CM28 PLANNING TABLE (TABULAR)
ORDER VIEW CM31 PLANNING TABLE (GRAPHICAL)
CM32 PLANNING TABLE (TABULAR)
AVAILABLE CAPACITY CR12 CHANGE
CAPACITY CR13 DISPLAY
OP4A SHIFT SEQUENCE
OP43 FACTORY CALENDER
<b>QM</b>
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
If usefule , please reward points. -
How to attach a document stored in Archive link in a notification
Hi Friends,
Is it possible to get the PDF file stored in Archive link and make it as an attachment in a notification. I think we need to get this PDF attachment and convert it into SOFM instance, then only we can make it as an attachment in notification becoz notification can accept only SOFM instance right?
Please let me know how to do this or is there any other simple way to convert this attachment to SOFM instance.Hi
this has been discussed and solved somany times in the forum. Please search with relevant terms like "PDF attachment in a mail".
Goodluck
venu -
Archiving of Maintenance Notification
Hi,
I'm posting this question after going thru similar threads on notification deletion and OSS Note:313790.
The problem I'm facing is even after following all the steps, after running the deletion program RIARCQMD the notification is not getting deleted from the system. Its current status is ARNB DLFL NOCO.
Please help in trouble shooting this. Thankshi
since your notification is used in maintenance order system will set the status ARNB (notification blocked for Archiving),once you delete the maintenance and historical order you notification will be archived
refer [checks|http://help.sap.com/saphelp_46c/helpdata/en/8d/3e64a4462a11d189000000e8323d3a/content.htm]
kindly check [Archiving -PM/CS|http://help.sap.com/saphelp_46c/helpdata/en/bc/c2963457889b37e10000009b38f83b/frameset.htm]
regards
thyagarajan -
Notification on Archive log full
Dear All,
I want an mail notification to be sent to my mail id, when my archive log destination is full.
Please help me on this regard.
Thanks in Advance...
Regds
KiranUse the Below script in CRONTAB for every 10 minuts
1. file /tmp/tmp.txt for the body of mail
#!/bin/bash
#Location Of archive destination
export ARCH_DEST=/opt/arch
# Max Size of Destination in KB
export ARCH_MAX_SIZE=1000
i=`du -s $ARCH_DEST|awk '{print $1}'`
if [ $i -gt $ARCH_MAX_SIZE ]
then
mail -s "SUBJECT" [email protected] < /tmp/tmp.txt
fi
Edited by: Baipaneni on Mar 2, 2009 2:31 AM -
I hoped to be able to add a reply to the most recent reply on March 8 in the "Another Error (I think) In the 12.1 New Features Guide" thread (https://community.oracle.com/thread/3526588), but since that thread has been archived, I am doing what was suggested elsewhere: create a new thread referencing the old one. My reply is:
Thank you for your explanation about preferring PDF over HTML. That is perfectly fine and understandable. Also, we very much appreciate your documentation feedback in this forum, and encourage you to continue to report any issues here.
I apologize for not replying much sooner. I either didn't get or overlooked an original notification about "Recent activity" after your reply; otherwise, I would have replied then.Thanks for that comment. I have sent a pointer to it to the writer for that book. Note that with the New Features Guide, most of the content is automatically drawn from an internal system that tracks projects and features; so if a change is needed, the writer will notify the owner of that content (typically a developer or a product manager) to investigate and (if necessary) modify the underlying data, after which the changed information will be picked up for a future revision of the book.
Also, while anyone is welcome to enter documentation comments in this forum, another option that may be more convenient for comments on specific sections is the Reader Comment area at the bottom of each HTML page (such as http://docs.oracle.com/cd/E16655_01/server.121/e17906/chapter1.htm#NEWFT495 for the page containing Section 1.5.9.8). Any comments entered in a Reader Comment area go to someone in our documentation production group, who forwards them to the appropriate writers.
However, if a comment involves multiple HTML pages or books, or if you want the matter to be in a public forum for visibility and searchability, posting in this forum is a good option. -
PO and Requisition Notifications
Using standard functionality in R12,
1. When purchasing buyer returns the requisition with a reason, can the requestor, req approver be notified via email about this? How?
2. Let say, the PO approver (someone from finance dept) rejects the PO due to lack of funds, the buyer will be notified via the workflow and he cancels the PO. What can the buyer do to notify this to the requestor and req approver(manager)? What happens to the requisition as the PO was already created in this case but cancelled?1. If a req. is returned, Oracle sends a notification to the preparer. If you need to expand this to include requestor or approver, you will have to write an alert.
2. If a po gets rejected and was never approved, you can NOT cancel it. You have to delete it. (I am assuming that the "archive upon" option is set to approval)
When a buyer deletes a PO, the req. goes back to the autocreate pool.
When a buyer cancels a PO, he/she has a choice to cancel the underlying requisition. You will notice that there is a checkbox called "Cancel Requisition" on the Cancel PO window. If the box is unchecked, the requisition returns to the autocreate pool. If the box is checked, the requisition gets canceled. You may have to write an alert or modify the workflow to send a notification out if you want someone (e.g the approver) to be notified.
Hope this helps,
Sandeep Gandhi -
Lync 2013 + Windows 8 phones not getting any notification but android and iphone works fine
Dear All,
Issue : None of the windows 8 phones gets alert when someone pings in lync2013
Description: We get notification when someone pings to lync2013 im configured in android or iphone and it fails to notify when someone pings lync2013 configured in windows phones Example : Lumia 920,930,625
Environment:
Singe FE and Edge
Assessments:
Push notification is enabled in the server side and on mobile
Tried using 2010 version client had the same issue
Push testing was successful until I updated the server and now after update I am getting the following error
PS C:\Users\administrator.tester> Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com -verbos
e
cmdlet Test-CsFederatedPartner at command pipeline position 1
Supply values for the following parameters:
TargetFqdn: edge.tester.com
VERBOSE: Reading access proxy port from topology process started.
VERBOSE: Reading access proxy port '5061' from topology process successfully finished.
VERBOSE: Reading certificate process started.
VERBOSE: Reading certificate process successfully finished.
VERBOSE: Searching for certificate with issuer name = 'CN=test-certsrv-CA, DC=tester, DC=com' and serial number =
'4200000013a701fa4732b0475b000000000013'.
VERBOSE: Successfully found certificate with the matching issuer name and serial number.
VERBOSE: Workflow Instance Id 'd283786a-ba07-42ad-83e2-ad4ed5692597', started.
VERBOSE: Command line executed is 'Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com
-verbose'.
Test-CsFederatedPartner : A 500 (The server encountered an unexpected internal error) response was received from the
network and the operation failed. See the exception details for more information.
At line:1 char:1
+ Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (:) [Test-CsFederatedPartner], FailureResponseException
+ FullyQualifiedErrorId : WorkflowNotCompleted,Microsoft.Rtc.Management.SyntheticTransactions.TestFederatedPartner
Cmdlet
VERBOSE: Workflow Instance ID 'd283786a-ba07-42ad-83e2-ad4ed5692597' completed.
VERBOSE: Workflow run-time (sec): 0.1410312.
Please let me know if this is causing the issue,
Please note : As soon as I see this tried invoking the csmanagementstore replication and got to know my edge server is not up to date - I am sure this has no relation with push this is for getting the changes informed to edge server,
Everything works normal with no issues apart from this,
Seeking your valuable advice here,
Thanks
Nelson
Nelson N Exchange 2003|2007|2010Hi Nelson,
To better understand the issue, I would like to collect the following information.
1. Have you added the new hosting provider, Microsoft Lync Online, and then set up hosting provider federation between your organization and Lync Online ?
Configuring for push notifications in Lync Server 2013
2. Have you installed the new root certificate?
Lync Servers currently use the GTE CyberTrust Global Root and beginning on June 1st, 2013 will migrate to the Baltimore CyberTrust Root. The
migration of Lync Online Service to use the new Baltimore trusted root Certificate Authority is planned during May 2013. As of June 1st 2013,
all of our servers including the Lync Push Notifications Clearing House Service will be on Baltimore certs only. So please ensure that your Lync Server deployments have been updated to trust the Baltimore Root before that.
http://blogs.technet.com/b/lync/archive/2013/05/02/lync-mobile-push-notifications.aspx
In addition, it is recommend to update the Lync servers to the lasted version.
Best regards,
Eric -
Incoming mail going to Archive, not Inbox
On Dec, 2 I submitted this question:
Dec 2, 2013 6:12 AM
My incoming mail now goes to the archive file instead of the inbox file. I have changed nothing and it still shows up in the inbox but allnew notifications go to the archive file. I am using OSX 10.9 Any ideas hoiw to fix this?
iMac, OS X Mountain Lion
It was suggested to delete the account and then add it anew. That seemed to work fine, but two weeks later it all began again. All the incoming mail goes to an Archive folder and no new notifications are shown in the new mail accopunt? I hate to have to delete and reopen the accoiunt every few weeks.
Any ideas? I see the same issue on other discussions but no explanations?What email program are you using?
-
Why GL Open Period related Workflow Notification is not able to be created on Worklist?
Hi Guru,
Our system is R12.1.2 and I expected and am waiting for WF notification when I closed and re-opened GL Period as Business Events oracle.apps.gl.CloseProcess.period.close, oracle.apps.gl.CloseProcess.period.open and oracle.apps.gl.CloseProcess.period.reopen are predefined and enabled.
But there is not.
Would you please let me know the reason and what would be resolution?
Thank you in advance.Hi Alan,
I can’t reproduce your issue, but you can change the requested by on the task form to “created by” column. Go to SharePoint
designer, open the workflow, under forms section, click task type form workname.xsn to open it in InfoPath form, then you can change the requested by to created by.
For more information, see
http://blogs.msdn.com/b/edhild/archive/2011/06/01/creating-custom-workflow-task-approval-forms-with-sharepoint-designer-2010.aspx
Best Regards.
Kelly Chen
TechNet Community Support
Maybe you are looking for
-
I've tried the suggestion "Please try the following: Disconnect your device and restart your computer. Restart the loading process" multiple times with or without battery, but still the same. This error propmpted while loading the system software. A
-
New Wireless MAC keyboard & mighty mouse very slow in retrieving information & sending
Good evening, I just purchased these items last night from the Apple store, they are both installed on my bluetooth. I do have OS Lion. Whenever I want to go to another site for example this site it spins and spins and takes approx 1 min which feels
-
Problem with refresh from production
Hi, I got restored files from production. Now i have created a script for control file.. startup nomount create controlfile set database "abc" resetlogs noarchivelog when i am running this file in mount state it is showing error that database name xy
-
I noticed a strange whistle noise coming from the pc when the cpu is oc-ed and I run orthos or intel burn test. The noise amplifies with the raise of the cpu frequency but only manifests on high loads(with orthos, intel burn test). Can someone with a
-
My iPad 3 64GB keeps crashing and restarting (3rd Generation 2012)
Last night I was playing on my iPad 3 64GB (Wifi only) and then all of a sudden it crashed then restarted itself. This happened again about 10 minutes later, and then again about 5 minutes later, and now it happens constantly every 2 minutes. I cant