Archive or back-up announcements

is it possible to back up the annoucenments in any way? my client had a BC partner issue today and as a result i realized that we have no saved off-line version of her announcements - in case we need to move it to another BC partner.
thanks!

No problem, as I mentioned BC support can simply move it from one partner to the other if there is agreement between the site owner and both BC Partners. It will just show up in the new partners portal and be removed from the originating partners portal. The actual site will remain untouched.

Similar Messages

Archiving and backing up.

I have recently had a nasty crash in which i lost everything on my system hard drive. now i want to start archiving and backing up to cd. i started archiving with my itunes folder which was around 6gig but the zip file was around 5.8gig. Aren't the zip files sposed to get much smaller? am i going about this the right way or is there smarter ways to back up the data? i also lost a few expensive downloaded programs and because i kept my proof of purchase in my email, i lost any chance of getting them back too. has anyone dealt with companies after having this happen? (lots of questions, i know. help with anything would be muchly appreciated).

spiffmeister, welcome to Apple Discussions.
You don't say what model G4 you have, but there are better options for backing up than using CDs. If you have a G4 desktop, you can add a second internal hard drive (you will probably be limited to 128GB max) & use it to back up you current HD. If you have a G4 iMac or laptop (or G4 desktop), get a firewire enclosure with a hard drive (you are not limited to size).
Look at Mac Backup - Mac Backup Software, Hardware, and Guides for Your Mac
http://macs.about.com/od/usingyourmac/tp/backuphub.htm
You can use CarbonCopy Cloner @ http://www.bombich.com/software/ccc.html , or SuperDuper @ http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html , or IBackup @ http://www.grapefruit.ch/iBackup/index.html , or Silverkeeper @ http://www.lacie.com/silverkeeper/ or the Restore function of Disk Utility included in OS X.
 Cheers, Tom

Purchase order archived long back. User wants to retrieve specific POs.

Purchase order archived long back in 2004.
These POs are not displayed in ME23n and ME2l.
User wants to retrieve specific list of POs and make them displayed in ME23n & ME2l.
Is there way to retrieve only selected (say 100 specific Purchase orders or Purchase order from specific Company code) purchase orders?
Kindly guide me.
Thanks & Best Regards,
Mohan

Hi Steeve,
Thanks for the information.
When I execute ME82, I get a window with "Archive Administration: Select Files for Read Program"
and list as below,
      000943 26.08.2006 all EKKOs older than 720 days
      000557 01.01.2005 all EKKOs older than 720 days
      000512 09.10.2004 all EKKOs older than 720 days
      000458 29.06.2004 SD_EKKO - archiving run file
      000434 28.05.2004 SD_EKKO - archiving run - job cancelled, files de
      000294 18.11.2000
      000291 16.11.2000
      000276 14.10.2000
      000267 16.09.2000
      000261 09.09.2000
Can I click, process and proceed? Would this create any problem?
Kindly inform.
Thanks & Best Regards,
Mohan

How to get Archived Data back ?

Hi Experts,
Please explain How to get Archived Data back ?
Thank you.

Hi,
Try Re: Reloading of archived business transactions using CRM_ACT_ON
Hope you find it helpfull,
Kind regards, Sigurd

After reading an e-book, how do you archive it back to the cloud?

After reading an e-book, how do you archive it back to the cloud?

All you have to do is delete it in the iBooks app (tap Edit, tap the book, tap Delete). If you don't want to see it on your bookshelf after deleting it, choose Books rather than Purchased Books from the Collections mene.

How do I get my pictures from archived project back into iphoto?

I trashed a few events from my current iphoto library to create some hard drive disk space. I thought they were backed up on another drive (that is all except one event with pics and movies in it). I have an archived dvd project with the pictures in it. How can I get the pics and movies from the archived project in iDVD into the current library of iPhoto?

Control-click on the iDVD archived project package and select Show Package Contents from the contextual menu. Then go to the Contents/Resources/stills folder. See if your photo files are in there. Any movies or music files should be in the Contents/Resources/av folder.
OT

Question about only new archive logs backed up in backup

Hi,
We are taking daily two online backup. We are running database in ARCHIVELOG mode. We configure database in PRIMARY and PHYSICAL STANDBY mode. Till now, we were taking all archive logs in backup. But it was causing problem of lot of space utilization of disk.
So based on search in this forum, I am planning to take only new archive logs generated since last backed up using following command.
BACKUP ARCHIVELOG all not backed up 1 times format '$dir/archivelogs_%s_%t' FORCE;
I am not sure about how it impact during restore and recovery when we take only new archivelogs in backup.
We restore database and then after perform always incomplete recovery till latest SCN capture in backup using following commands.
RESTORE DATABASE;
RECOVER DATABASE UNTIL SCN $BACKUP_LAST_SCN;
Do you see any problem/risk of implementing this solution going ahead?
Please let me provide your thoughts/inputs for this.
Thanks.
Shardul

Hi,
We are not deleting archive logs from actual location after backup. We keep latest 6 days archive logs at actual location. But here we are planning to put only new archive logs in backup image which were not backed up due to disk size problem.
For your reference below is our datbase backup RMAN commands. We are taking full database backup.
run {
ALLOCATE CHANNEL C1 TYPE DISK;
delete noprompt archivelog all completed before 'sysdate-5';
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
BACKUP INCREMENTAL LEVEL=0 CUMULATIVE format '$dir/level0_%u' DATABASE include current controlfile
for standby force;
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
BACKUP ARCHIVELOG all not backed up 1 times format '$dir/archivelogs_%s_%t' FORCE;
BACKUP CURRENT CONTROLFILE format '$dir/control_primary' FORCE;
Then in this polich do you see any problem when we restore database as PRIMARY or PHYSICAL STANDBY on server. We are using Oracle 10.2.0.3.

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

How can I set up a Macbook to wake up at a certain time for backing up?

My wife objects strenuously to Time Capsule (wireless) backups so I finally set it to once a day, starting at 7 pm. You would think that would work but NO, runs too long and even next morning to finish. We are backing up only documents, mail, safari, etc. — no Apps.
We also back up online to BackJack once a day.
So I am thinking what may be a solution is to have it run at night, when she is asleep and the only time she is not using it.
But how do I wake it up at the designated time? If we leave the lid up will just start when something is scheduled like Time Machine or Backjack? Or do I need additional software?
Thanks,
Richard

Richard Pitcairn wrote:
Basically, for my wife's settings, we exclude iTunes, movies, Apps but do back up Mail, Safari, Docs, Prefs. I have watched it and it does indeed run a long time.
Then something is broken. Backups are only useful when done from a known good system. Then, if that system dies, is stolen, etc. you can restore from your backups. You are backing up a known bad system. If and when you need to restore (and you may, considering something is wrong), you may find your backed up data to be garbage. It is worth investigating why those backups are taking so long. You shouldn't have to exclude anything. You shouldn't be able to generate enough hourly changes to cause the backup to be so slow as to interfere with normal operation.
Two things that could be improved are the memory on the Macbook and the available disk space on the Time Capsule. You are low on both. However, I suspect the problem is elsewhere. You might want to review her log files during a backup to see if there are any error messages.
As for using BackJack, she is an artist and has about 40 GB of photos on her drive that if lost, might be the end of our relationship.
Then those files need to be archived, not backed up, to one or more devices. They should probably also be verified. I have seen people dutifully run backups for months, never realizing they were backing up junk and overwriting the previous, valid backups. I discovered that only when called in to do a system restore from backup.
Time Machine too slow, too small a capacity. I ran Mozy for a while but really slow and CPU consuming. BJ is reasonably fast, does incremental backups, does tie up CPU nearly as much.
I think you have jumped to some invalid conclusions based on some other, underlying issue. When your system if functioning properly, Time Machine should make anything else look like a joke. Your system is sickly, and backing that up isn't doing you any favors.
My advice is to shut down all backups, perform an archive backup, and verify that the archived data is valid. This might be an excellent occasion to use a cloning tool such as Carbon Copy Cloner. Then investigate why your backups are so slow. I suggest buying a new hard drive anyway for that 40 GB of critical data. May as well get an additional hard drive for the Time Capsule and some more RAM. Then re-partition that machine and reinstall the OS, perhaps onto yet another new drive. That is probably the quickest, easiest, and cheapest way to get your systems back up to speed and running well for the long term.

How to recover deleted back-up file(s) from iTunes?

I'm needing to figure out a way to recover back-up files that iTunes removed during the recent install to the update 11.0.1.
I went to back up my phone manually. (Which I've been doing for years) I've never used or enabled auto-sync. Before I start a back-up I re-name my phone in a format like this "iPhone0913" This is to eliminate any confusion. That iTunes might try to interpet as, a duplication of another back-up file. By it having the same name (Which I know it won't but I do it anyway) Before the installation of the new update. I had 8 back-up files all dated and in order with the name designation that I've proivded. For example: 1. iPhone0105 2, iPhone1106 etc. as the numeric designation is for the month and year. So Oct. 2005 was my oldest back up file.
Once the installation/update took place, I plugged my phone in and clicked on back-up to this computer. All was moving along as it should, since this was only a back-up. Not a back-up and restore!! At any rate, I went through iTunes to verify that the back-up was there. (As I always do) And low and behold.. GONE!!
The only back up that was showing, was the back-up of "iPhone0913" I did'nt go into panic mode at that point. Thinking that maybe iTunes moved or maybe archive the back-ups. I was trying to remain optimistic, but I knew there was'nt much that could be down. But maybe, I'm missing something.. I was able to locate 4 of 8 back up files. Only because I had backed them up from another drive.
I don't have Windows System Restore, enabled, So I was'nt able to recover that way. I'm still beside myself that this even took place.
At this point, I'm looking for any recommendations, sympathy.
Thanks in Advance for your help and support!

Get Back and recover Iphone Lost Contacts,Messages,Photos from iOS devices iPhone, iPad, iPod
You can use a iPhone Files recovery tool to recover all iphone data,it is the an all-in-one iPhone/iPad/iPod Data Recovery software for personal users that can recover data directly from iPhone, iPad and iPod Touch, including contacts, photos, videos, SMS, iMessages, call history, notes, reminders, voice memos, etc., as well as recover data from iTunes backup file.
There are 2 solutions to recover recover iphone ipad ipod lost dat--recover iphone SMS messages,Contacts,Photos,Videos,App,calendar, notes, call history and more.
1.Recover data from iOS Device
Scan iOS device directly to find data deleted recently,or data lost due to inaccessible iOS,download the right version for your iPhone 4 (GSM & CDMA), iPhone 3GS, iPad 1 or iPod touch 4.
2.Recover from iTunes Backup File
Scan iTunes backup files if you deleted data for a long time,failed to recover from iOS device directly,or lost iOS device,Recover data for any iOS device like iPhone 4S, iPhone 5, etc.By extracting the previous iTunes backup with any version of the software. It supports the newest iOS 6 when you use this recovery mode!

How does one export a completed project to archive media?

I just finished editing my first video with FCP-X.
I want to be able to archive the project, in its entirety, to another drive, complete with media. That is that all media files are included so if the client wants me to go back and make changes, updates, etc., I can just move the archived project back to my Movies folder and everthing will be right there so I can get back to work.
Then I want to then be able to delete the finished project from my Movies folder and begin a whole new project.
I would really appreciate some help, or if I can get pointed to in the right direction to find the instructions.
Also, is it true that FCP-X can only work on one project at a time?

Hi Tom,
I have the same wish copying a project with used clips only to another drive for storage that works as independent project.
So I executed the command “duplicate project + used clips only” (i checked "include render files") creating a duplicate onto a second drive. When I wanted to check if the duplicated project would work independently all files were missing (I unplugged the first disk where the original project+events are stored).
It appears that FCPX creates alias files of your media referencing to the original event on the first disk. So it still needs the original event files to work properly!!??
My question: is there any way to really duplicate a project + really used clips (no alias) only that works INDEPENDENTLY of any other files in other locations?
(the reason I want this is that I don’t need to store the entire original event with transcoded media being 3 times bigger than the original media that comes from my DSLR)
Thanx a stack in advance
Cheers
Caspar

Install left problems HOW CAN I GET BACK TO TIGER FROM LEOPARD?

so i upgraded from tiger to leopard, then i had a few problems, i.e. itunes would quit everytime i tried to delete a podcast, or editing multiple song info would make it crash. My ms word continously crashes as well as ichat.
So since i really need this maching working for school, can anyone tell me how to get back to tiger?
i tried an archive install and that did not work, i also tried creating a user acount and i know the problem lies within my primary user account, not other newly created accounts, i also tried removing cache and some plists so it would rebuild but still same problem.
So, CAN ANYONE TELL ME HOW TO GET BACK TO TIGER WITHOUT LOSING ANY OF MY DATA? PLEASE?
THANKS

You can do an Archive & Install back to Tiger.

Archiving shopping carts and dealing with archives

hi sdn,
in srm 2.0 we are archiving sc with transaction SARA. We don't know any other way than using report BBP_PD_ARCH_SEQREAD to pull archived sc back into the system, to display information concerning one sc. Recently we got short dumps because the archives are about 100 mb sized. So we ran out of memory, which caused the dump.
<i><b>And the Question is:</b></i>
Is there any other (better) way in higher releases than SRM 2.0 to deal with archived SC? This report BBP_PD_ARCH_SEQREAD is not really handy - the output looks similar to transaction bbp_pd but is much harder to read. So if you really need to get information you might as well jump through different tables as well.
regards, matthias

Hi
Please check the following Wiki session, may it can help you about the Archiving process in SRM.
[https://wiki.sdn.sap.com/wiki/display/SRM/HowtoArchiveaShopping+Cart]
Always refer to the online help as well.
[http://help.sap.com/saphelp_srm50/helpdata/en/15/c9df3b6ac34b44e10000000a114084/content.htm]
I hope it helps!

How to send files back to TC from external hard drive quickly?

Hi,
I have just archived 500gb of my TC to external hard drive which was directly connected to TC. I have replaced failing hard drive in TC on 2GB (£50) and reformated gain. Now is ready to be used. Then I wanted to put archive files back onto TC from that external hard drive which is directly connected to TC. The problem is that when I was archiving it files where send directly from TC to external hard drive and it took approximately 5 hours to do it. Now to reverse all that taking about 5 days because for some stupid reason hard drive is sending all that files through my desktop and back to TC again.
Is there any faster way to do it?

A: you DONT modify your TM backup, youd just add files into the same HD, however thats no good because........
Youre trying to create a nasty choke point for data failure by putting time machine AND your files on ONE DRIVE,
very bad idea, hard drives are cheap as dirt, buy another, 2 MINIMUM external redundant backups of your vital data, period.
also, cloud isnt a place for data archives, and not safe, not secure.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

Moving Events and archiving videos directly from Canon HF100 to External HD

Hello,
After purchasing my Macbook and my canon HF100 camcorder I got too carried away and excitedly imported too many videos to Imovie. When the Macbook had no more space to import new movies, without reading instructions ( NOW I KNOW... ALWAYS to read instructions first) I archived the videos directly onto an external HD ( 500 gb FAT 32 format).
Now in order to free up some space I tried to move the existing events and projects from macbook to the same hard drive , but the HD icon has a yellow exclamation mark, which I now know means that it has to be formatted to MAC OS. and MAcbook will not allow moving of any events or projects to the hard drive..
My problem as below:
1- If I format my external HD now, it would loose all the previous data etc which I do not want. Since the directly archived videos are stored in FAT 32, does that mean they are now unusable for I Movie import? What should I do next in order to store the currently archived movies properly that Mac recognizes and reads the data correctly?
2-I need to free up space on my macbook as soon as possible as the startup disk is totally full. I do not want to buy another external HD to move my data but i do already possess an I book external hard drive which is also Fat 32 format and has photos etc.. which I do not want to loose by formatting it.
Can I copy all the files from my external HD ( where I archived the movies) to the I book ( where there are other movies and photos from windows computer) which is FAT 32 format and then format it to MAC OS and re transfer the archived movies back. Will Macbook recognize the files then?
All the videos and photos are very precious to me and I do not want to lose them. Any help with my problem is highly appreciated. I wait eagerly for an answer. Many thanks in advance.

Do I need to create a seperate folder for the RAW archived files which are yet to be processed by I >movie?
In general, you want to be able to move it back exactly as it was, you can drag it over to the iBook, then drag it back. If it helps to put everything under one folder to do this, that is OK. When you move it back, make sure it looks like it looked before you moved it.
Can the RAW files be transferred to a FAT 32 HD without formatting to MAC OS.. will this not >corrupt the data?
Probably. I'm guessing you are using an 8GB SDHC card or similar with your Canon. If you put your card in a card reader on your Mac you should see it in the Finder (or you can connect your camera directly). If you see it in the Finder, do a right-click/Get Info. I would bet that your SDHC is formatted as FAT32. So if the original camera is Fat32, you know that FAT32 is fine for the archive.
Here is why. FAT32 has an architectural limitation for file sizes. Files cannot be more than 4GB (minus one byte) - or 3.999999999 GB.
The files on the camera are highly compressed AVCHD. Further, you would typically press record and stop several times while shooting, so no one clip is going to be bigger than 3.999999999GB. The only way you would exceed this is if you recorded a 2 hour event by pressing the record button once and letting it run without stopping. Even then, Canon probably has a workaround where they divide it up into 2 files that are each smaller than 3.999999999GB.
So if the camera can accept FAT32, why can't iMovie? The reason is that on import, iMOvie converts the highly compressed AVCHD into full frames of Apple Intermediate Codec. The file size will typically increase by a factor of 8 to 10. So now it is quite possible to have a clip that exceeds the 4GB limitation. So iMovie does not allow FAT32 as a valid file structure.

Archive or back-up announcements

Similar Messages

Maybe you are looking for