Archive Records using object MM_SPSTOCK, MSKA records not archived.

Hello ,
I am trying to Archive some material using object MM_SPSTOCK, i used Tcode MM74, I have just checked only "other special stock " option and executed. its giving me below error messages :
MSKA: 18345 EN30 EN31 E V57292 000100 unrestricted-use stock exists for previous period
MSSA: 18345 EN30 E V57292 000100 dependent sales order stock records exist
I have checked the stock, its cleared. In table MSKA, i can see one records with 0 stock.
I have also checked the stock using MMBE, but no stock found.
Can you guide me why above errors are coming, because of this i am not able to archive my sales order.
Regards,
Sujeet Mishra

FM MSKA_EXTEND  is used to check previous period stock.
the message and I told you already that you have stock in a previous period.
And I told you to read OSS 30656 as this note explains how to remove stock in a previous period.
further I told you that it does not make sense to archive something what is still in use, which is the case for a special stock if it has stock in the previous period.
There is no legal work around. 
Please open a message at SAP Support and have them confirm what was said, or  raise a developement request directly

Similar Messages

  • When occurs crash recovery,why use active online redo log not archived log?

    If current redo log had archived, but it's still 'ACTIVE'. As we all know, archived log is just an archived copy of the current redo log which is still 'ACTIVE', they have the same data. But why use active online redo log not archived log for crash recovery?(I think, if crash recovery can use archived log, then whether the online redo log is 'ACTIVE' or not, it can be overwritten)
    Quote:
    Re: v$log : How redo log file can have a status ACTIVE and be already archived?
    Hemant K Chitale
    If your instance crashes, Oracle attempts Instance Recovery -- reading from the Online Redo Logs. It doesn't need ArchiveLogs for Instance Recovery.
    TanelPoder
    Whether the log is already archived or not doesn't matter here, when the instance crashes, Oracle needs some blocks from that redolog. Archivelog is just an archived copy of the redolog, so you could use either the online or achive log for the recovery, it's the same data in there (Oracle reads the log/archivelog file header when it tries to use it for recovery and validates whether it contains the changes (RBA range) in it what it needs).

    Aman.... wrote:
    John,
    Are you sure that the instance recovery (not the media recovery) would be using the archived redo logs? Since the only thing that would be lost is the isntance, there wouldn't be any archived redo log generated from the Current redo log and the previous archived redo logs, would be already checkpointed to the data file, IMHO archived redo logs won't participate in the instance recovery process. Yep, shall watch the video but tomorrow .
    Regards
    Aman....
    That's what I said. Or meant to say. If Oracle used archivelogs for instance recovery, it would not be possible to recover in noarchive log mode. So recovery relies exclusively on the online log.
    Sorry I wasted your time, I'll try to be less ambiguous in future

  • Editing a record using Objects SAP2007a

    Hi
    I  wrote a program using SAP objects to store contact information for one of our customers.
    I created a SAP object which handled the master table and 2 transactions tables
    There was very little code in the program but the screens are quite complicated
    The user has been adding and editing records for some years now with no problem
    Recently though a user must have changed the contact number ( code field ) of an existing record and they lost the information in the 2 child tables
    When I looked in the tables the code field in the main table had changed but not the code fields in the transaction tables
    Should I test for this in code or is there some automatic way for the code field to be changed in the transaction tables ?
    Any ideas please ?
    Regards Andy

    Hi Andy,
    I doubt both your thoughts, code either being changed automatically or thru code.  If the same code has been working all these years, and if the user has done a similar operation earlier, there is no chance of problem being in the code.
    If such an operation performed by the user is for the first time, then, there might be a doubt in the way things are handled in the code. 
    My sincere advice is, you might check with the user himself as to what exactly was done during the update of the contact info.  If they had tried to change any other value, like say code or something due to a typo perhaps, and if that is not handled by your code, then, chances are there for this scenario of yours.
    Regards,
    Satish.

  • Action recorded using RAW open step will not work with layered PSDs

    Hello,
    The title says it all.
    I have an action for resizing photos (and some other things), that I want to make general enough to work on NEF's, JPG's and PSD's. When I recorded the action I used a NEF file and the action works great also for JPEGs and also PSDs that don't have layers. When running the action on a layered PSD, the step immediately after the "open" step fails, no matter what it is. For example, if it's "hue/saturation", I get the error "hue/saturation not available".
    So I was thinking that the image should be first flattened so I added 2 additional steps just after the open: one to add a dummy 0-opacity layer and another step to flatten the image. But no matter what, I keep getting an error at the step after the open: "new adjustment layer not available" or the like.
    I'm thinking that the problem is with the open step actually. For some reason, the o CameraRaw open step is unable to produce a suitable image out of a layered PSD.
    Is there a workaround for this? Thanks!

    Thanks for the explanation.
    However, I am still puzzled as to how the programme can detect lack of time code when the tape was not even rewound or played. I belive the time code is written on the tape.
    Anyway, I tried iMovie and found that the programme detects the camera and controls it. However, it does not recognise the downconverted DV signal. When I turned the DV conversion off, the video was detected and imported using MagicMovie in HD. I still have not gone round to burning on a DVD. ( I only read the article mentioned by Sue after having tried the iMovie programme - somehow the link that was so clearly stated in the reply missed my notice earlier on).
    I have actually recorded the downconverted DV video on a standalone Phillips DVD recorder but the DVD only plays in that recorder and my Mac DVD Player even tho I have finalised the +R disk. The same problem occurs with a +RW disk.
    I appreciate the replies and the explanations. Thanks.
    m_elan
    Power Mac G5   Mac OS X (10.4.9)   2.5 Gb ram

  • Upload Purchase info Records using LSMW

    Hi,
      Im uploading purchase info records using LSMW - direct method
    Object               0060   Purchasing info rec.
    Method               0000
    Program Name         RM06IBI0
    i need step by step process for this. any one have done this using this program help me out.
    Regards,
    Vimal

    Hello Jürgen
    and thank you!
    One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
    Thanks again
    Alicia

  • Validity date of condition records (creation of info records using LSMW)

    Hello gurus,
    we would like to create info records using LSMW with one condition record (PB00). This works fine, we just are not able to influence the validity of the condition record, it's always "creation date until 31.12.9999".
    We tried to maintain the fields BKONP-DATAB and BKONP-DATBI, but that did not change anything.
    Any ideas on this?
    Thanks
    Alicia

    Hello Jürgen
    and thank you!
    One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
    Thanks again
    Alicia

  • E-Recruiting - SLIN Error "insufficient authorization to use objects'

    Hi,
    When I do the Extended Syntax Checks (SLIN), got below error message. Should i neglect it or ?
        u201C  Program:  ZHRRCF_CON_CAN_CREATE  Include:  ZHRRCF_CON_CAN_CREATE_FORM  Row:    169  [Prio 2]
    Object PROG ZHRRCF_CON_CAN_CREATE has insufficient authorization to use objects
    CLAS CL_HRRCF_CANDIDATE_ADMIN_BL from package PAOC_RCF_BL
    ZHRRCF_CON_CAN_CREATE in package ZHR_EREC_FE
    CL_HRRCF_CANDIDATE_ADMIN_BL in package PAOC_RCF_BL
    The used object, CLAS CL_HRRCF_CANDIDATE_ADMIN_BL, is not visible
    (The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
    EXTENDED CHECK OFF/ON)u201D
    ...Naddy

    Your application and development work, right?
    The check you do is more or less a warning, that the PAOC_RCF_BL package is not visible, within your package.
    If your application works, ignore it.

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
    Doesn;t look like it's listed as a feature of the iPad app.

  • Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

    hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

    Friedrich sp wrote:
    Can you send me a mixer wich can do that, please ?
    Who do you think I am? Santa Claus?
    What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
    Roland UA 1010
    Focusrite Scarlett 18i8
    However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
    The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

  • Record entry date - using system date as default not working

    Hi,
    I have a form which allow users to enter the information... I want to have a field to save the date when they've updated the record...
    in order to accomplish the above, here is what I did:
    1) I created an item on the form (put the source as table_column that I am using to save the record entry date on the table)...
    2) In the Default field I put "sysdate" to capture the current date...
    3) I made the item "Display only" so that no one should be able to change it...
    so far so good... when my users open the form they see current date populated in the form...
    my challenge is that when user saves the form, everything that they enter saves except for the "record modification date"... Not sure if it's due to date format or something else causing it, the date format on my form is DD-MON-YY and seems like the format on my table is DD/MM/YYYY... if it's the date formatting issue then please advice how to fix it...
    I've saved a sample on APEX.ORACLE.COM for your review and comments... Here are the log in details
    Workspace: tparvaiz
    Username: [email protected]
    Password: tparvaiz
    Application: 28899     Default Date and White Space
    Appliaction Page No: 24
    ID/PW: TEST/TEST
    Thanks

    Hi,
    Default value only used when item value is null. So when you fetch the from it gets the value from database column and omit the default value. I use trigger to store audit information i.e. create date, username etc.
    Here is an example if you want to use -
    The following trigger will capture the date and username and store into the table.
    CREATE OR REPLACE TRIGGER TRG_BI_TABLE_NAME
    BEFORE INSERT
    ON TABLE_NAME
    REFERENCING OLD AS OLD NEW AS NEW
    FOR EACH ROW
    BEGIN
    /* change the column name as of your table */
      :new.create_date := SYSDATE;
      :new.created_by := v('APP_USER');
    END;This trigger will store user information and date when record been updated -
    CREATE OR REPLACE TRIGGER TRG_BU_TABLE_NAME
    BEFORE UPDATE
    ON TABLE_NAME
    REFERENCING OLD AS OLD NEW AS NEW
    FOR EACH ROW
    BEGIN
    /* change the column name as of your table */
    :new.update_date := SYSDATE;
    :new.updated_by := v('APP_USER');
    END;Hope this helps,
    Regards,
    Tajuddin
    web: http://tajuddin.whitepagesbd.com

  • How can I save captured clips to hard disk using the actual video recorded date, not the date I transferred it?

    When using Batch capture in AP5.5, the clips are saved to hard disk using the capture date as the Created Date and Modified Date.  How do I configure Premier to use the actual clips recorded date (Meta Data Basic/Date Created) so that I can view them in Windows folders and other applications based on the date the video was recorded, not when I imported it.

    AFAIK, there's no way to do that with Premiere Pro.  You can probably find a utility on the Internet that will change the dates for you after the fact. 
    Cheers,
    Jeff

  • Inserting record using form does not work. Please Help

    I am trying to insert a record using INSERT INTO command in a form followed by commit.
    I put the command in when-button-press trigger( I use a button to initiate insert into table command).
    But it does insert the record into the table.
    Then I try to ignore the INSERT INTO command and only use COMMIT, and it works.
    But when I use control block, I can not use commit only to insert into table.
    Is there anything that I have missed ?
    PLease help. I had tried to solve this fora week.
    Thank you, I really appreciate any response.

    Setting your block as a datablock with source as a specified table and a number of items connected to specified columns gives you direct access to your table. Thus your commit alone will work. The second you change this to a control block, you cut your connection to the table. Thus you must use an insert into statement followed by a commit. By the way, when you use a commit statement, it processes exactly like a commit_form inbuilt function.
    Hope this helps,
    Dave

  • Create table field (not record) using ADDT software

    Hi,
    I wondered if anyone can give me detailed help on how to create a table field on-the-fly instead of creating records, using ADDT software.
    For Example:
    I have two tables.
    One table holds language names and codes, ie Australia and AU for the shortened code.
    The other table holds country descriptions, but each table field is the shortened country code (in this case AU)
    So what I want to do, is when I add a new language in the admin (ie, France) then it will create france in table 1, and also create the table field FR in table 2.
    I am not up on programming, so if anyone can detail as much as possible, you will be saving my bacon here.
    Many thanks
    Mark

    Hi.
    Sounds like what you need is a "foreign key" in the detail table that points to the id of the country in the country table.
    ADDT is perfect for this even if the documetation (and this klunky forum) is now third class.
    I suggest that you read this http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=MXK3_052000_MX_K3_cont rol_panel.htm
    Make special note of Step 2, item 5, second bullet point.
    (Note item 4 demonstrates the point about pathetic documentation)
    This would be applicable to your Detail Table that needs to have its foreign key pointing to the id of the country table.
    For example, consider two tables with these fields:
    Countries:
    id_cou (the record ID)
    name_cou (the name of the country)
    isocode_cou (the ISO code for the country eg: AU for OZ)
    Details:
    id_det (the record ID)
    idcou_det (the foreign key which is the ID in the Countries table - so this is an interger field - not a text field)
    detailfield1_det (some detail info)
    detailfield2_det (some more detail info)
    etc
    etc
    So in the Dynamic LIst Wizard for the Details list you make sure that the foreign key points to the primary key of the Countries record.
    Now, here is the neat thing: When you get to creating the form for the Details table the foreign key gets displayed as a menu showing the actual names of the countries listed in the countries table.
    Experiment with that and see how you go.

  • Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
    Any help would be appreciated
    BTW
    Ive tried all the system sound prefs, and garage band drivers. Back and forth.
    cheers
    ds

Maybe you are looking for