Archive/source files for web CMS

I produce video for a pair of websites, and am in the process of implementing a web video CMS (thePlatform). I am having some trouble choosing a good source format for my material as I have the following requirements:
-files smalls enough to upload to a web server (DV compression is out)
-files with sufficient quality to withstand transcoding to lossy, more compressed formats like 300k, 320x240, Flash Video, or a suitable video podcast format (h.264, mp4).
-files that will offer some hope of larger, higher quality encodes in the future (say 480x360, 600k), as my source file can live on as an "archive" in the CMS.
I'm considering
video: MPEG-4, 1200k, 640x480, 29.97fps (or source), key frame every 15 frames
audio: 44.1k, 128kbps
I suppose this is a pretty specific question, and a little outside of FCP, but if there are any web video veterans out there I'd love to hear what they are using.
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Similar Messages

Can't find source file for newsservice.NewsServiceProxy in JMS Web Service

i can't find the source file for newsservice.NewsServiceProxy in JMS Web Service. The
newsservice.NewsServiceProxy is required for client to post news to server and received news from server. But
i can't find where the file located in the newsservices.jar provided in that tutorial.
Someone please help me to located it. thank you :)

Hi,
You will have to generate this file. The steps to generate this file has been provided in the Install file present under NewsService/doc/Install.html (once newsservice.jar is extracted) - Running the NewsService client application section - Step 1.
Follow the instructions, and you will be able to download the zip/jar file which contains newsservice.NewsServiceProxy within it.
Regards
Elango.

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

PSD source file for animated GIF's - Fireworks CS3

hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueli

ugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Source files for sapjco3

Does anyone have access to/know how to get access to the source files for the sapjco library? In particular, I am seeking the .c files that were used to create libsapjco3.so. These are needed for an Android application that I am building.
Thanks!
Jim Daniel

Howdy Erhan,
The short answer is that using jco via mobile is a clean and easy interface, that doesn't involve web services. The entire point of my app (which is a PoC) is to avoid having to set up a .bsp or .jsp page and all the security concerns that comes with it. Using the jco package, you can "log-in" in an analogous manner to the SAP log-on. Again, it's clean, simple and easy.
Having access to the source files, whether in java or c, would be an immense help.
Thanks!
Jim

.FLV file for web

Hello, I need to export a .FLV file for web, I dont have access to compressor.
I would like to keep the file size small but keep a professional finish, how low can I go in terms of file size?
Any suggestions for dimensions, fps etc?
Any help would be appreciated, thanks

the file is a .mov
.mov is a container. The video inside could have been made with any one of a number of codecs.
768x576 is the current size.
That tells me it is most likely PAL, 25 fps. What was the source media? Could be any of the Beta formats, 3/4", D1, 1"C etc etc. More information is always a good thing.

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Example of a source file for Creating general maintenance task list

Hi SAP Gurus,
I need to create general maintenance task list from a source file. Reading forums i found that it is possible by using LSMW, with object 0490 and method 0000.
However, I don't know how to associate structure IBIPTLST, IBITLOP and IBIPMAT. When i assign individual source files for each structure, and I execute LSMW, a problem appears indicating that IBITLOP don't have all the required fields from the list header.
This is the structure propose by SAP in standar programa IBIP.
Structure - IBIPTLST     Task list header
|-->> IBIPTEXT (see comment below)
   |-->> IBIPTLOP   Operations
|       |-->> IBIPTEXT (see comment below)
   |       |-->> IBIPTMAT Material for one operation
   |       |-->> IBIPPRTS Production resources/tools (PRT
   |                   |-->> LONGTEXT (see comment below)
   |       |--> IBIPMPAC Maintenance packages (up to 32)
   |--->> IBIPBDCD (see comment below) from operation overview
In other forums, a possible solution is to define an unique source file, that is proposed by LSMW, but i don't know how to obtain this template.
Can you send me an excel example of how to define de input file or the steps I have to follow in order to execute an LSMW or the standard transaction IBIP?.
My e-mail is [email protected]
I have read all the SAP documentation, what i really need is an example.
Thanks a lot
Andrés.

solved

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
 <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
 <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
 <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Archive/source files for web CMS

Similar Messages

Maybe you are looking for