Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Similar Messages

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

Archive Source Files with Errors is Missing

Hi
I don't have this option or "Handling of Empty Files" available in ID on my Live or QA Servers although I do have on my Dev. They are all on the same SP and Patch Level 7.0 SP 14. Any suggestions ?
Thanks

Hi Thanks for the replies .. I found out there was a difference between the CIM Model between the environments, which has been now levelled. Folloing this I refreshed the CPA cache and I reimported the SAP BASIS 7.00 component but no joy. In the IR If I right click on the SAP BASIS BASIS package on my dev environment -> Display Support Package It displays SPS 9 and SPS 10. If I do the same on my QA env then it displays only SPS 9. This is surley where the issue is but I do not know how to rectify. Any ideas ?, is this because the CR content ?, (CIM Model, CR Content and XI Content are a little unclear to me). Is it an idea to do an export and import from my Dev to QA environment ?.
Thanks in Advance
Damien !

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. Why?

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?

Hi irenedix,
After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rave

DB Adaptor import table option does not work with the AS400 DB

1. The DB Adaptor import table option does not work with the IBM i-series(AS/400) tables(Both in ESB and BPEL).
2. Also I was not able to import tables from multiple databases into
the same BPEL project.

Both of these issues work in preview version. My earlier posting was based on beta version testing.

Error: ELM does not work from UI

Hello guru´s,
hard to explain this briefly, but here it goes.
We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
Thanks in advance.

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

Error Parser does not work, even in SSX3

SunSudio Express (December 2006 release) introduces some interesting new features, but there are still problems. For the first time, I was able to debug Fortran 90 applications in Linux, but debugging is still very limited. Furthermore, the Fortran error parser does not work, even when compiling using Sun's f95 compiler. This is a heavy disadvantage. I assume that Fortran error parsing is not supported on Linux, although the tutorials don't make this point clear: In the Options window, there are settings concerning C/C++ (and its parser), but there are no similar options for the Fortran parser, even in "Advanced Setings" (which are similar to the old Options window). My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.
I don't think that I'm doing something wrong, but I want to ask, just to be sure: has someone had seen the Fortran error parser working on Linux? What about Fortran word completion?

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

Send to bluetooth right click option DOES NOT WORK

hi guys can you help me send to bluetooth right click option does not work!when i am going to send something it says windows cannot access the specified device,path or file you may not have the appropriate permissions to access the item please help me!i
have windows 8

this is how we send file using Bluetooth
http://superuser.com/questions/540498/open-bluetooth-file-transfer-wizard-in-windows-8
Did you pair this 2 device before?
May I know the destination device? its comes with WIFI?
tips: rather than Bluetooth, I suggest you using file sharing with WIFI, its more faster

Hyperlink with tracking applied does not work in PDF

We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
>

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

Archive Source Files with Errors, Option Does not work

Similar Messages

Maybe you are looking for