Archive utility "Error 32 Broken Pipe"

I'm looking for some way to fix archive utility. It will not open any .tar files, and I can not do it from the command line either. When archive utility tries to open the .tar files, it gives an error message: "Error 32 Broken Pipe" always. Is there a solution to this?
Using version 10.5.8.
Thanks

So, what do you expect us to do? We can't contact the Apple Software Engineering team, either.
If you don't want to reinstall to get Archive Utility working again, use tar in the Terminal. Type man tar at the prompt for help on using it.

Similar Messages

  • Solaris Error: 32: Broken pipe

    Dear sir,
    Yesterday I found in alert log file bellows warning.
    and In that time some clients inform us they are cannot log on
    to the application. after few times they could log on to
    database automatically.
    Oracle Database 10g
    Version:- 10.2.0.4
    OS :- Sun Solaries spark
    and
    It is dedicated environment .
    In parameter file
    processes = 4000
    Content of alert log file.
    ===================
    Mon Dec 6 16:03:00 2010
    Thread 1 advanced to log sequence 67690 (LGWR switch)
    Current log# 3 seq# 67690 mem# 0: /d01/oracle/oradata/stlbas/redo03.log
    Mon Dec 6 16:20:39 2010
    Process J000 died, see its trace file
    Mon Dec 6 16:20:39 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:20:39 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Process J000 died, see its trace file
    Mon Dec 6 16:20:45 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:20:45 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Mon Dec 6 16:21:01 2010
    Process J000 died, see its trace file
    Mon Dec 6 16:21:01 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:21:01 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Mon Dec 6 16:21:17 2010
    Process J000 died, see its trace file
    Mon Dec 6 16:21:17 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:21:17 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Mon Dec 6 16:36:24 2010
    Process J000 died, see its trace file
    Mon Dec 6 16:36:24 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:36:24 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Process J000 died, see its trace file
    Mon Dec 6 16:36:30 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:36:30 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Mon Dec 6 16:36:41 2010
    Process J000 died, see its trace file
    Mon Dec 6 16:36:41 2010
    kkjcre1p: unable to spawn jobq slave process
    Mon Dec 6 16:36:41 2010
    Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
    Mon Dec 6 16:38:18 2010
    Thread 1 advanced to log sequence 67691 (LGWR switch)
    Current log# 4 seq# 67691 mem# 0: /d01/oracle/oradata/stlbas/redo04.log
    contents in the trace file are -
    ==========================
    /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining Scoring Engine
    and Real Application Testing options
    ORACLE_HOME = /d04/oracle/ora102
    System name:     SunOS
    Node name:     badb1
    Release:     5.10
    Version:     Generic_142900-07
    Machine:     sun4v
    Instance name: stlbas
    Redo thread mounted by this instance: 1
    Oracle process number: 26
    Unix process pid: 1885, image: oracle@badb1 (CJQ0)
    *** SERVICE NAME:(SYS$BACKGROUND) 2010-12-01 13:24:30.248
    *** SESSION ID:(2191.1) 2010-12-01 13:24:30.248
    *** 2010-12-01 13:24:30.248
    Process J000 is dead (pid=25006, state=3):
    *** 2010-12-01 13:24:37.277
    Process J000 is dead (pid=25012, state=3):
    *** 2010-12-01 13:59:56.397
    Process J000 is dead (pid=1185, state=3):
    *** 2010-12-01 15:55:42.277
    Process J000 is dead (pid=15686, state=3):
    *** 2010-12-06 16:20:39.526
    Process J000 is dead (pid=9458, state=3):
    *** 2010-12-06 16:20:45.565
    Process J000 is dead (pid=9480, state=3):
    *** 2010-12-06 16:21:01.641
    Process J000 is dead (pid=9518, state=3):
    *** 2010-12-06 16:21:17.712
    Process J000 is dead (pid=9550, state=3):
    *** 2010-12-06 16:36:24.213
    Process J000 is dead (pid=11942, state=3):
    *** 2010-12-06 16:36:30.238
    Process J000 is dead (pid=11970, state=3):
    *** 2010-12-06 16:36:41.289
    Process J000 is dead (pid=11998, state=3):
    content of listener log file like bellows (in that time only)
    =====================================
    06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=001zohur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1771)) * establish * STLBAS * 0
    06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-02)(USER=154shahadat))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.32)(PORT=1528)) * establish * STLBAS * 0
    06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-07)(USER=043sathekur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1758)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1772)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:22 * service_update * stlbas * 0
    06-DEC-2010 16:16:24 * service_update * stlbas * 0
    06-DEC-2010 16:16:25 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=003aftab))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1794)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:25 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=NEW-SUN-APP)(USER=023sohel))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.37)(PORT=4291)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:27 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1796)) * establish * STLBAS * 0
    06-DEC-2010 16:16:27 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1797)) * establish * STLBAS * 0
    06-DEC-2010 16:16:28 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-11)(USER=030salah))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.33)(PORT=3982)) * establish * STLBAS * 0
    06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=504refayet))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4995)) * establish * stlbas * 0
    06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=019aporna))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1800)) * establish * STLBAS * 0
    06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=504refayet))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4996)) * establish * stlbas * 0
    06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=003aftab))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1801)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=019aporna))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1802)) * establish * STLBAS * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Solaris Error: 32: Broken pipe
    06-DEC-2010 16:16:30 * service_update * stlbas * 0
    06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=501azad))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4997)) * establish * stlbas * 0
    06-DEC-2010 16:16:31 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=501azad))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4999)) * establish * stlbas * 0
    06-DEC-2010 16:16:32 * service_update * stlbas * 0
    What is the cause ?
    and
    why it shown "Solaris Error: 32: Broken pipe" ? please
    Best Regards
    Halim

    Thanks
    Sorry for not Formatting .
    Actually I don't know how format code here.
    SQL>
    SQL>
    SQL> select * from v$resource_limit ;
    RESOURCE_NAME                  CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
    processes                                     1607            4000       4000       4000
    sessions                                      1596            4005       4405       4405
    enqueue_locks                                 1380            6280      57390      57390
    enqueue_resources                              563            2901      19600  UNLIMITED
    ges_procs                                        0               0          0          0
    ges_ress                                         0               0          0  UNLIMITED
    ges_locks                                        0               0          0  UNLIMITED
    ges_cache_ress                                   0               0          0  UNLIMITED
    ges_reg_msgs                                     0               0          0  UNLIMITED
    ges_big_msgs                                     0               0          0  UNLIMITED
    ges_rsv_msgs                                     0               0          0          0
    gcs_resources                                    0               0          0          0
    gcs_shadows                                      0               0          0          0
    dml_locks                                       43             718      19380  UNLIMITED
    temporary_table_locks                            0               3  UNLIMITED  UNLIMITED
    transactions                                   306             722       4845  UNLIMITED
    branches                                         1              13       4845  UNLIMITED
    cmtcallbk                                        2               4       4845  UNLIMITED
    sort_segment_locks                            1594            4451  UNLIMITED  UNLIMITED
    max_rollback_segments                          136             361       4845      65535
    max_shared_servers                               0               0  UNLIMITED  UNLIMITED
    parallel_max_servers                          1324            3600       2560       3600
    22 rows selected.
    SQL>Regards
    Halim
    Edited by: Abdul Halim on Dec 7, 2010 4:04 PM
    Edited by: Abdul Halim on Dec 7, 2010 4:04 PM

  • Archive Utility error

    Hi All,
    Just got the problem with Archive Utility. Getting Error 2, no such a directory. It works great with other applications
    Any ideas?
    Thanks /xxx

    A better and safer syntax is the single command:  sudo rm -rf /var/folders/*  since if  the first line above does not succeed, or is entered in a separate terminal session, the second command will remain pointed at the top level of your home folder by default, effectively telling the computer to ERASE ALL CONTENTS of "~/"  your account's home folder.  In that event, all personal content - desktop files, downloads, documents, local email storage, music, movies, favorite bookmarks, and so on - will be immediately deleted!
    Caution is also recommended, since /var/folders  is temporary storage for a lot of applications.  At minimum quit any other open applications and be prepared to restart. 
    Naturally any command involking "sudo" will only run within an administrative account.  If you don't have an admin account, if the computer is not your personal property, if the computer returns an error when invoking "sudo" or if you simply have doubts or questions about what each element of these commands does,  well that's simply nature's way of saying "call IT." 

  • Apple to resolve my archive utility issue

    Apple has to resolve my archive utility issue with the error message  Error 32: Broken Pipe.  Apple says I have to re-install the Yosemite 10.10.2 software.  I am totally against re-installing the software for the simple reason that Archive Utility is "untar" the files with tar.gz file.  I am really unable to download and install some of the software that comes with tar.gz extension. It is really frustrating.    
    Apple has opened the case but since they told me to re-install the software which I declined and advised them to close my case.  
    I want to talk with Apple Software Engineer team but Apple said they could not connect me with their Software Engineer Team.
    With regards,
    Vasu

    So, what do you expect us to do? We can't contact the Apple Software Engineering team, either.
    If you don't want to reinstall to get Archive Utility working again, use tar in the Terminal. Type man tar at the prompt for help on using it.

  • Broken Pipe issue on HP

    I was printing large format color images on my HP Color LaserJet CP1515 with great results when suddenly one image did not come out. I checked the printer and appeared this info: Error 49 Broken Pipe... I thought it was a printer problem, I turned off and on and tried to print the demo page. It worked perfectly, tried an Acrobat file with image and again perfect, so I tried again the file I had the issue and again no results... This file was being printed using Photoshop.
    I would appreciate any help about this issue.
    Thanks!
    Mario

    The following is the scenario where the broken pipe exception occurs to me:
    - webapp on a Linux server with Apache + Tomcat.
    - database (SQL Server) on another computer.
    - the webapp creates one db connection at startup, stores it in the ServletContext and always uses that connection for any db access.
    - If the db server is restarted, or just the SQL Server service is restarted, the connection that was in the ServletContext becomes invalid, and any attempt to access the db through it throws the broken pipe exception.
    At this point the webapp has to recreate the connection and re-store it in the ServletContext in order to gain access to the db again.
    HTH

  • I recently downloaded is x mountain lion and while it finished it erased all my data, some of which I need. When using disk utility I found my old data but it says corrupted. I can't repair and while restoring the error code 32 Broken Pipe appears. Help?

    My data I need is on my computer but it needs to be repaired but can't and when I try to restore it/back it up it ends abruptly with error code 32 broken pipe.
    It was damaged while installing os x mountain lion and I found my data on disk repair (utility)

    Sounds like your hard drive is badly corrupted, likely due to problems that were already there when you started trying to install Mountain Lion. The problem is, if you don't have any backups already, you may not be able to recover all your data from this state. Do you have backups of that data already?
    If not, I assume when you say that "it needs to be repaired but can't," you mean that Disk Utility tells you there is a problem with the disk, but that it is unable to repair it? If so, you can try repairing the drive using DiskWarrior, which can repair problems that Disk Utility cannot. That may give you access to your data again, but may not.
    Also, it's important to understand that if your data is not backed up, everything you do with the computer runs the risk of overwriting or corrupting that data. You may want to go straight to trying to recover your data. See Recovering deleted files.
    Regarding the error code, if you're trying to back up the drive using Disk Utility's Restore tab, note that that is often not successful when the drive you're trying to back up is corrupt.
    Once the situation is resolved - either because you have backups, are able to recover your data files or are forced to accept that they are gone permanently - you will need to erase the hard drive and reinstall the system and all your apps from scratch.

  • AppServer or Web App error (9.0.4) and BROKEN PIPE

    Hi,
    I'm still using 9.0.4, and have started getting the following message in the base server.log of the Oracle Container.....
    07/12/16 21:18:33 Internal error in HttpServer
    java.lang.ArrayIndexOutOfBoundsException
    at java.lang.System.arraycopy(Native Method)
    at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:216)
    at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:151)
    at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:146)
    at com.evermind.server.http.EvermindHttpServletResponse.handleException(EvermindHttpServletResponse.java:1743)
    at com.evermind.server.http.EvermindHttpServletResponse.handleException(EvermindHttpServletResponse.java:1572)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:803)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    It's happening a lot, but I can't see any impact when using our web apps. Looking at my three most used web apps, I see the same error appearing at identical times in the individual log files, but they are all using different pages, so don't think they are 'causing' this prob.
    Does anyone think I have something wrong with the basic application server, or is this indeed an issue with a particular web application that's spreading it's error to other web apps? Example of the error in a web app below.....and what is a Broken Pipe error?
    Thanks in advance
    Iain
    07/12/16 21:18:33 web: Broken pipe
    07/12/16 21:18:33 web: Servlet error
    java.lang.ArrayIndexOutOfBoundsException
         at java.lang.System.arraycopy(Native Method)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:216)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindJSPWriter.writeOut(EvermindJSPWriter.java:456)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindJSPWriter.jspflush(EvermindJSPWriter.java:373)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindJSPWriter.write(EvermindJSPWriter.java:522)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindJSPWriter.write(EvermindJSPWriter.java:447)
         at observations.first_2d_observationsYR._jspService(_first_2d_observationsYR.java:174)

    Raju --
    Thanks for the intelligent posting on a difficult issue for you.
    I wasn't aware of anything specifically being introduced that prevented the bootclasspath technique from working** in the 904 release.
    For 904, the bootclasspath needs to be put in the start parameters tag of the java-options tag.
    <process-type id="home" module-id="OC4J" status="enabled">
    <module-data>
    <category id="start-parameters">
    <data id="java-options" ... -Xbootclasspath/a:/java/lib/xerces.jar"/>
    </category>
    </module-data>
    </process-type>
    You can also try copying the xerces.jar into the jre/lib/ext directory so it's loaded by the system classloader and see if that works**. This will put xerces at the extension level so
    **these workarounds are not supported and will put you in an unsupported situation if a problem occurs.
    The good news is that have taken steps to clearly enable the separation of container versus appplication class spaces in thenext production release (10.1.3) of OC4J. We will be providing a new classloading model which cleanly separates the two namespaces and allows applications to provide their own versions or distributions of class libraries with no collisions with the OC4J runtime libraries.
    I don't know of any easy ways to do what you need -- other than reworking the app to use JAXP so that the parser implementation used is pluggable as you kind of allude to. If it was possible, I'd do that rather than hard coding in the use of the Oracle XML parser.
    But just to reiterate, switching in xerces at the bootclasspath level is not a supported operation since it may have an effect on the OC4J runtime operation.
    cheers
    -steve-

  • Java.io.IOException: Broken pipe error in R12 oacore log

    All,
    Very frequently my R12 login page is going to blank screen at the same time oacore application log has below,
    20:02:27.606 html: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
    at sun.nio.ch.IOUtil.write(IOUtil.java:75)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
    at java.nio.channels.Channels.write(Channels.java:71)
    at java.nio.channels.Channels.access$000(Channels.java:58)
    at java.nio.channels.Channels$1.write(Channels.java:145)
    at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
    Application - 12.1.3
    DB - 11.2.0.3
    OS - AIX 6.1
    Has anyone faced this before ? Any note-id/suggestions pls ?

    Hi;
    Very frequently my R12 login page is going to blank screen at the same time oacore application log has below,
    20:02:27.606 html: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)Please review:
         How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1]
    Regard
    Helios

  • Broken Pipe Error

    Downloaded and tried to install Streamclip but I get an error. "The following disk images failed to mount" "MPEGStreamclip1.9.1 Broken pipe" is this a problem with the download or is something wrong with my system?
    Have a G5, OS X 10.4.11, 1.8 GHz PowerPC
    1 GB DDR SDRAM

    Well, it's meant to be the first thing you mention, but can be the OS misbehaving.
    Do these two things & reboot if you haven't...
    Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
    http://docs.info.apple.com/article.html?artnum=302672
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751
    Do other downloads work?

  • Broken Pipe Error when using database link

    We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
    The connection works fine, unit I try to access a view that has a union and db links
    in it.
    We have used one or the other (view or a dblink) and it works, but when used together,
    we get broken pipe error.
    I haven't proven that this is the cause, I will try to setup a test, but I was wondering
    if this is a known issue or what ??
    thanks
    Rich

    You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
    To create these views, connect "/ as sysdba" and run:
    $ORACLE_HOME/rdbms/admin/catproc.sql
    which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
    It is best to run the whole catproc.sql script (and not just the catrpc script).
    You can run and rerun catproc.sql several times quite safely.
    Cheers

  • Broken pipe, DMLException: JBO-26061: Error while opening JDBC connection

    Hi,
    We are facing strange problem with oc4j903 container using bc4j getConnection() method.
    We are getting the following error intermitantly using bc4j getConnection() method.
    ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
    oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
    and then it says ,
    java.sql.SQLException: Io exception: Broken pipe.
    It gets connection automatically in a matter of minutes.
    Has anybody faced these problem or anyone has the solution please help us out.
    Thanks,
    Chinna

    Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
    cheers
    -stevee

  • DMLException: JBO-26061: Error while opening JDBC connection, Broken pipe

    Hi,
    We are facing a strange problem with oc4j903 container using bc4j getConnection() method.
    We are getting the following error intermitantly using bc4j getConnection() method.
    ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
    oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
    and then it says ,
    java.sql.SQLException: Io exception: Broken pipe.
    It gets connection automatically in a matter of minutes.
    Has anybody faced these problem or anyone has the solution please help us out.
    I appreciate your inputs.
    Thanks,
    Chinna

    Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
    cheers
    -stevee

  • Pdf file causing archive utility to throw error

    I have a couple of pdf files which cannot be compressed without an error. Supposing that the nasty file is called foo.pdf.
    . In the Finder, right click on foo.pdf
    . Select Compress "foo.pdf"
    A file called foo.pdf.zip is created but an error pops up An error occurred while compressing a file. Strangely enough, the error window has a titlebar called "Copy".
    When looking in the Console, there is always an error from mdworker listed:
    2/24/2009 10:23:37 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20524] zip importer countered an error (2) scanning "/Path/to/foo.pdf.zip"
    This same file also always errors out when trying to use -ditto- in a Terminal window. (See this minithread: http://discussions.apple.com/thread.jspa?threadID=1724912 )
    FWIW, attempting to open foo.pdf.zip causes the Archive Utility to throw the error
    Unable to unarchive "foo.pdf.zip" into "Wherever".
    Error 1 - Operation not permitted
    Does anyone have any idea what could be causing the problem?
    Bill

    Nothing's wrong with it except that it doesn't support encrypted .zip files.  You'll just have to use third-party software, or a Terminal command, to unzip those.

  • Broken pipe error in Sync Send JDBC Receiver:   Extremely Serious issue

    Hi forum,
    I have a serious error in a JDBC->XI--> JDBC scenario,
    Step1: I use a sender JDBC channel to select some distinct values from  a table say X, and update the same rows,
    Query SQL Statement: select distinct Branch from dbo.X where status = 0
    Update SQL statement: update dbo.X set Status = 2 where Status = 0
    Step 2: enter BPM
    Step 3: enter a loop
    Step 4:make a synchronous call to the same table X, to fetch some records,
    SQL query: select * from X where status = 0 and Branch = i; Update X set status = 9 where Branch = i
    Step 5: close loop,  this loop iterates for 5 or 6 times depending on i, which is no. of branches selected by the sender JDBC channel
    so all the calls are to the same table, same databsse(SQL Server)
    the problem is when this sync calls happens in the loop, it some times gives following error, which i se in RWB:
    <b>Error Unable to execute statement for table or stored procedure. 'X' (Structure 'STATEMENT_X') due to com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Broken pipe (errno:32). Context:(2217)</b>
    i have no way to trace the cause of the error, the database is perfect and the error logs in the SQL server shows no trace of any error,
    Note: It works sometimes
    i dont know whom to approach, pls help
    the issue is very very serious as its in production system,

    Hi Sudeep,
    SAP Note 846079 - XI 3.0 JDBC Receiver: # of Retries on SQL Error w/o Effect
    Please check the following SAP note also - 831162
    Some info which i found there and can be relevant in to your scenario.....
    Q: I am using a JDBC Receiver Adapter in conjunction with the  Lotus Domino Driver for JDBC perform an INSERT or UPDATE operation on a database. When sending a message to the receiver, the Adapter Monitoring shows the following error message:
    "java.sql.SQLException: [Lotus][Domino Driver for JDBC]Invalid cursor state"
    Is there a fix for this issue?
    A: To work around this JDBC driver problem, activate the Advanced Mode for the respective JDBC Receiver channel and configure the setting "Number of Retries of Database Transaction on SQL Error" to a value > 0. Additionally, make sure that the setting "Database Auto-Commit Enabled" is also active as the Lotus Domino Driver for JDBC does not support transactions.
    Apply note 846079 before configuring this scenario.
    Q: The TCP/IP connection to my database host is running over an unreliable network connection, i.e. the connection is sometimes interrupted. Consequently, I sporadically receive an SQLException regarding a closed connection in the system trace or audit log or the connection as well as the JDBC Adapter channel are hanging.
    How can I work around this connectivity issue?
    A: Enable the "Advanced Mode" for the respective JDBC Adapter channel and select the option "Disconnect from Database After Processing each Message".
    Note that this might put additional load on your DBMS due to the creation of a new database connection for each message.
    I dont have access to a database right now, so i am not able to check this.
    Also check the JDBC driver compatability as mentioned in the above note.
    Cheer's

  • Agentry: SSL Error - broken pipe

    Hi,
    We have a work manager 5.2 modified version running on our production environment and lately we are experiencing some weird errors when the users try to synchronize.
    Sometimes (maybe 50% of the attempts...) the synchronization process is stuck and the client doesn't show any error at all. It's just waiting while loading a complex table, replacing definitions or anything, but never finishing. Inspecting the server logs I've seen that the error that seems to cause this issue is the following:
    2014/04/10 14:22:57.203:       + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
    2014/04/10 14:22:57.203:         + ANGEL Vine=1848370469
    2014/04/10 14:22:57.203:           + User=XXXXX
    2014/04/10 14:22:57.203:             + Server=Agentry
    2014/04/10 14:22:57.203:               + Complex Table=ctmaterialstoragelocation
    2014/04/10 14:22:57.203:                 + User=XXXXX
    2014/04/10 14:22:57.203:                   + ANGEL Vine=1848370469
    2014/04/10 14:22:57.203:                     + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
    2014/04/10 14:22:57.203:                       + Data Chunk=0
    2014/04/10 14:22:57.203:                         SSL error: error:2007107C:BIO routines:BIO_write:broken pipe
    This time it happened while loading the complex table ctmaterialstoragelocation but it's just an example. It can happen in any other step.
    Do you think that this error is really related to SSL? I think it's not and my guess is that something is wrong with the network and the connection is broken but I don't know how to be sure about the root cause of the issue. Any clues that could help me?
    Thank you.
    Tags edited by: Michael Appleby

    Hi,
    I'm going to close this thread since I discovered that the issue is due to my company network problem.
    We haven't found the root cause, but after many attempts testing from my home wifi I don't face the problem, so it is not caused by the Agentry Server.

Maybe you are looking for

  • Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

    connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!? hello everyone. if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful

  • View in Landscape format

    Hello, I have a PDF file where all of the pages display in portrait format.  I want to change some of the pages to display in landscape format.  I then want to save it so that when visitors to my website will view it in the format that I have set (ei

  • Replace Internet Explorer Image with Site Image

    I would like to replace the IE image or any image in the address bar with the image of the website. Is this doable and if so how would I go about doing this. Thank you in advance.

  • CRS-1 8-Port 10 Gigabit Ethernet Interface Module

    How much is the back plane speed for a line card on CRS-1? Does using a 8-Port 10 Gigabit Ethernet Interface Module in CRS-1 have an oversubscription of 2:1, like the WS-X6708 in 7209 chassis? Thanks

  • E145: can't restore after Win 8.1 update

    Hi all, updated my E145 to Win 8.1 and installed some programs. Then had to do a restore. So pressed F11 on startup and clicked through the messages. As a target OS only 8.1 was listed?! Choosed it and then the recovery process stops. Systems says: P