Archived files missed after deletion job

Hi All,
We are generally doing the techinical archiving for some objects in ECC 6. Here for one object, write job & delete job is finished. but any how, archived file is missed before store job. There was some hardware failure.
Now, we have get them restored from backup but i am not able to access the restored files from tcode SARA to store them in our storage server. It is still showing the files as failed in Store job archive file selection screen.
I need to store those files in our storage server but archive file is not accessible from file system.
Now, please let me know, what should i do in this case.
Thanks in advance.
br
Ankit

Hi,
I do a little bit of Archiving using SARA, but not any expert
We had such situations when the file was deleted from OS level while Archiving run was in progress at SARA.
What we do in such situation is to disable the existing Run in "SARA" -> Put in Archiving Object name --> click Management, click on the failed Run and "Mark it for deletion".
Start a new run for the same Archiving object, Keep the variant same ( I mean keep the selection dates same as earlier run) and start all over again with Write, delete, store etc.
I dont know how much it helps
Might be different from the scenario you might have on hand.

Similar Messages

Hundreds of files "missing" after upgrade?

After I upgraded to the new iTunes, there are hundreds of files that are marked with the exclamation point, and it says they can't be located. I tried following the instructions on the support site to replace my library file with a previous one, but that didn't work. I tried re-copying my music files into my iTunes music folder, and I see the files there, but that still didn't help. I can double-click on each and tell it to locate the file, and I find it and replace the one that's there. It works for that individual song, and then I get the option to look in the same location for the other files, but it always says that none of them could be found (they're all right there). Is there any way to avoid doing this individually for a few hundred songs? And whyyyyy did iTunes screw up my whole library after the upgrade? So frustrating. I want to go back to when it worked...

You get exclamation marks or dead tracks because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
I can't tell you why it happened in your case.
DO you have your music library on an external drive? Things can go wrong if you start iTunes with it unplugged.
Anyway one thing you can do if all your tracks are bad is to drag iTunes library.it from your music folder to the desk top and then start iTunes. iTunes will create an empty library. Now youn can add your iTunes Media folder. This loses counts, ratings an play lists but it is quick.
If you don't like that, Something you can do to figure out what went wrong is to open iTunes Library.xml with WordPad.
Look for lines starting <key>Location</key>
These contain the paths to files, note that spaces are replaced by %20.
By inspecting these it may be possible to figure out what went wrong and fix it.
You may need to make file extensions visible to identify itl and xml files.
Message was edited by: polydorus

HT4477 One complete family file missing after installing iPhoto 11 ??

One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

File present after deleting from gallery file

This problem seems to have multiple symptoms:
I save an image over another image in the gallery, but the original image is displayed.
I delete an image file from the gallery file then save another file into the folder with the same name as the previously deleted then the deleted image is displayed when used.
I delete an image file from the gallery folder then start a new, blank, project and the image file that I deleted is available to use in the project...but the file isn't in the gallery!?
Can someone please help me figure out how to permanently remove these "ghost" files?

Indeed it isn't clear.
So I'm not sure what you are reporting here. It sounds as if you have visited the Gallery in order to delete an unwanted image, no? And on deleting an unwanted image, you create a new project and somehow see it?
For one thing, a totally new project shouldn't be using anything from the Gallery. Now there may be other content that gets added if you elected to use a Theme. Is that perhaps what's happening here?
What exactly are you seeing that you wish to wave goodbye to? A screen shot might help. To add one, use the Camera icon in the web interface to the forums. Don't try to attach to email.
Cheers... Rick

Help files missing after upgrade to Lightroom 3

Dowloaded the upgrade, installed it, reinstalled it... help files missing... message is .. Cannot display help..
Use Lightroom 3 on Win 7 professional at 64bit...
Please help...

Solved problem by finding a folder in CS5 Photoshop set up files.. under the folder payloads.. and installing setup file for Adobe Help from there.. also installed updates from Adobes website for Media Player and Air...

Archive Files Missing

hi
scenario is
archived log files are missing in DR site.
missing archived log files are not available in LIVE server too.
i have to recover my DR site from this scenario and make synchronise with LIVE server.
kindly provide me the solution as soon as possible.
oracle 7.3.4 and solaris 5.8
plz tell me step by step what can i do now with the commands too.
your help is most appreciatable

the following information will help you all to provide me exact solution.
please i am in very need of it.
Environment
Server Name     Server role     Server hardware     IP Address     OS      Oracle Version
Alahlia-sune2     Live Server     E450     192.5.15.1     Solaris 8     7.3.4
AlAhliav440DRS     DR server     V440     172.16.32.2     Solaris 8     7.3.4
DR Solution Description
The requirement of Al ahlia Ins. was high availability of data. As Oracle version 7.3.4 is used at Al Ahlia, some features like standby server (Oracle 8i), Dataguard (Oracle 9i) are not available in this version.
To achieve High Availability of data in Oracle 7.3.4, OCS Infotech provided the following solution.
The archive log mode was enabled on live server database. This mode facilitates to have online backup and generation of archive logs on live server. The archive logs from the live server can be copied to DR server and can be used to recover database to keep it in sync with live server database.
DR Solution Implementation
The archive logs are pushed from live server to DR server at regular intervals 6 times a day. The database on DR server is recovered on regular basis once in couple of days in order to keep it in sync with the live server. The DR server database is always kept in mount state.
In the unlikely event of unavailability of live server, the recent archive logs can be applied to database on DR server and can be opened for users to continue their work.
Technical Details
Script used for pushing archive logs to DR site Location:
/appl/oracle7/backup-scripts/archlog-backup.sh
The directory /data/arch/PROD on DR server is mounted as /drs on Live server.
The above-mentioned script copies the latest archive logs to /drs.
The script is scheduled at 12 AM, 6 AM, 9AM, 12 PM, 3 PM 6 PM in root’s crontab.
The time was decided after analyzing the number of archive logs generated and time taken to copy.
Online Backup
The online backup script:
online_backup.sh present in /appl/oracle7/backup_scripts.
Procedure to take Online_backup
Login as oracle user
# su – oracle7
$ cd /appl/oracle7/backup_scripts
Run Online_backup script by issuing the command
$ ./online_backup PROD 1
PROD - database name
The backup is taken on tape attached to Alahliav440 server.
This script deletes 2 days old archive logs after taking the online backup.

File recovery after deleting from trash

I recently discovered I had duplicates of most of my music files, which quickly filled my hard disk. CDs I have ripped were placed into my "Music" folder instead of my iTunes directory, so I started moving most things from the music folder into the trash. I mistakingly selected my iTunes folder as one of the pieces to be moved into the trash, but did not notice before attempting to empty the trash. Due to iTunes still running, I recieved a message saying that the operation could not be completed because certain files were still in use. After seeing that my iTunes music folder was in the trash I quickly moved it back into its original location, but it's now empty.
Is it possible to recover these files? If so, how?
Thanks,
Ryan

Hi Ryan, Welcome to Apple Discussions.
If there is any chance of recovery at all your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another process on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
EDIT: But wait... I don't think your Music has actually been deleted:
Due to iTunes still running, I recieved a message saying that the operation could not be completed because certain files were still in use.
There is a special way of moving your music folder, take a look at this support article. This support article is better.
-mj
[email protected]
Message was edited by: macjack

Music files missing after sync with iTunes

All of my devices are updated to the last version.
I created playlists to manage syncing music from iTunes to iPhone.
Sometimes my music files would be missing on my iPhone 6 running iOS 8.1 after sync with iTunes 12.0.1.26.
When music missing, they look OK in iOS playlists, but will appear a "waiting for copy” symbol on the right side then jump to next song one by one when I try to play.
It's really weird because it happens randomly, I totally have no idea when it will happen again, more even far from why ...
Zen style APPLE !!

It sometimes takes awhile for the info to download from itunes.
try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Source files missing after wsus install

2 days ago I decided to install WSUS and SUP on our SCCM 2012 server and all was going good until this am when I discovered the folder that I keep all of my software deployment in under the sourcefiles share was empty. I did take a snapshot
of the server before I started the install and everything seemed to go well, I could see my updates and it was syncing fine. Now if I boot the server normally the folders disappear under \sourcefiles\applications. If I boot to the snapshot they are there but
after a while they disappear as well and the updates show up under software updates without the wsus role installed on the server. I can see the folder right now and I am copying the contents to an external drive. I had setup windows server backup to back
up my whole hyper-v server sccm and sql are on the same box but I could not get backups to open at all, so this snapshot and the one I did when we did the initial install are all that I have. I have the sourcefiles shared out and mapped to my desktop and the
size of the share keeps changing as well.

I'M pretty sure I had WSUS configured right, I have a lab at my house and it is working fine although it is on Sever 2008 and is 3.0 not 4.0. I have made some progress today, I found this blog about SCCM 2012 and WSUS last night which really helped. I removed
WSUS this morning and the updates were still there but if I read the article correctly it says they will remain in sccm for 7 days when they are "tombstoned" so we will see. I am running a scheduled sync right now and it's almost done but I have also created
a folder under software updates and moved all of the files there. During my sync I have been doing a search on that folder for expired "no" and selecting all and moving them back to the root folder.
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
Anyway thanks for your help

Desktop files missing after Mountain Lion update.

Hi All,
I work in a research lab at a University, and we ran an update on one of our lab computers [previously on 10.7.4]. Upon updating the OS to Mountain Lion, all of my files were fine, with the exception of the files on the desktop.
On the HD, there was the newly selected user name [BlankenshipLab], and the old username, which said [JB(deleted)]. I could look into the (deleted) folder, and see subfolders for Desktop, Documents, Movies, etc., etc. But, I couldn't access them, as it said I didn't have permissions. As such, I rooted the new user, and I used the sudo chown -R blankshiplab:staff /Users/JB/Desktop. I used this command on all other subvolumes. When I gained access, the desktop folder, was empty, however. There were old files in the documents and downloads folder that weren't there before, either.
If anyone could help us recover the missing files, it would be greatly appreciated!
Best,

Hi no real idea on this, but many Network connectivity issues have been solved by this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Render files missing-after duplication and also after moving

I have to replace a drive, which is still working well, so i went ahead and tried to move libraries with all its content (Events,projects,reneder files), which doesnt exist as an option... as far as i was able to figure this out....
then i went ahead to move events, where as one in 5 was movable the others would only have copy as an option.
which strikes me as oddity already...
after this was done i compared the content of libraries between the 2 drives, and was in shock.
the render files were all missing, needless to state here, that i wil NOT re-render weeks of work again...LOL
so i went and googled this, and came to thousands of answers on how to move or copy events to a different location , but always on the same HD.
there was absolutely nothing about moving Libraries with the Events and Projects and render Files all together explained ,.... ANYWHERE!
is there anyone out there who knows how to do this, so the render files actually move over to a new HD and ,...of course,...are reconnected there propperly and usable?
manually moving these render folders will NOT reconnect them to the projects,.... just as a FYI ...
why is there no instructions in the FCPX help menu on moving " Everything "..??
but thousands of article on how to move only parts and pieces .....

using disk utility to do a clone of the old drive to a brandnew drive... would this have done the trick?
you know the restore to destination trick....
or would have these renderd files still not connect since the drive might have a unique manufacturer id number...
yes ...the new drive would have been called the very same as the old drive...
the old drive has a clicking noice so seagate replaced it...
and i am in a challenge to move all stuff over now...to the new drive...

MSVCR80.dll file missing (after latest iTunes update). Unable to reinstall iTunes either. Fixes?

After installing the latest iTunes update, I am unable to open iTunes (The program can't start because MSVCR80.dll is missing from your computer). Plugging in my iDevices won't prompt iTunes to open, either (they are viewed only as mass storage devices). I attempted to reinstall iTunes, but recieved an error message that said I had insufficient rights to install (I am an administrator). Is anyone else having similar problems? Is there a way to fix it that won't include uninstalling the current version of iTunes? Don't want to lose all my files! Thanks for a rapid response, Community. I appreciate all the help I can get.

Hi bookishwench,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Audio Files Missing after sent from FCP

I'm sending a sequence to STP from FCP. There are 8 tracks of audio (4 stereo pairs). Tracks 1 & 2 have dialogue, 3,4,5 &6 have SFX and 7 & 8 have music. After sending a Multi-track project I am missing audio files on the dialogue track. The visual reference is there. The audio and video are linked in FCP but sections of dialogue are just not there.
I've repaired disc permissions, trashed preferences, ran Disk Warrior and reinstalled FCS. I'm on STP 3.0.1.
I searched the forum and was unable to find a similar situation. Any and all insight are greatly appreciated. Thank you in advance.

You have to assign tracks to a submix and then out to the master before you can hear them.
But some of the audio files are there and some of them aren't. There is no rhyme or reason for audio that appears and files that are missing. I can hear the dialogue that made it to STP from FCP, along with the SFX and the music. I've never assigned a submix to audio just to be able to hear it.
Are you on a laptop?
I've tried it on my 8 Core Mac Pro and my 2007 MBP. Same result on both. I have other sequences where everything is sent over completely. It's just this one. It is no different from any other sequence. It is all ProRes 422 and .AIFF 48khz/16 Bit
Thanks for your input.

ITunes files missing after MacBook Pro software restore

After my MacBook slowed to a crawl, I decided to restore the system software (OS and Applications) and ended up with much improved responsiveness and performance. I keep my ITunes files on an external hard drive. When the restore was completed, I set the library address to the external hard drive, and copied and pasted all my music, video and applications into Itunes window. My music came in fine, my movies are there as well, but my apps never showed, and my TV shows didn't appear either. I tried pasting 1 TV show file into ITunes TV Shows, and I tried pasting all of them. A small window came up telling me the system was "processing" the files, but they never showed up in the ITunes window. I also tried double clicking on the file name on the external hd (sometimes that imports them as well into ITunes window), but no luck there either. Any advice? Thanks.

This happened to my 2006 Macbook when the logic board was replaced under Applecare by my local service centre due to a known issue at the time (random shutdown). It didn't affect the warranty or cause me any problems so I didn't bother to go back to them although I later found out that they could and should have reset it at the time.
The only thing that might have been a problem if I had had more than one computer was that it made my iTunes account think that I had two computers authorized, i.e, a sort of "ghost" left over from the previous serial number. As you can only have five machines authorized with an account it means you have one less available to you even though you don't actually have that computer. This was not a problem to me as I didn't need five authorizations, and anyway you can go into your account once a year and reset your account. You may need to do this if you have five computers you need to play your iTunes purchases on.
Still lazy of the repair centre not to reset the serial number for you though.

Files missing after memory card switch

I recently bought a new memory card, and it seems that a number of files that came installed on my Nokia E52 have disappeared. Can anyone tell me how I can get them again? They are:
1. The "Grey" personal and business themes
2. The OEM version of Advanced Call Manager
I have tried copying various files backfrom the old memory card, but with no luck. The reason I was unable to make a proper backup is there is no backup function in the application for Mac as there is with PC Suite for Windows.
Thanks.

I've gotten two memory cards 2GB then 8GB and the same thing happened. Also, the backup in 'PC Suite' mode misses some files. So what I did was connect my phone in 'Data Transfer' (USB connection) and physically copy those files that I wanted to my pc then back to the new memory card. Should sort out most of your troubles.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

Archived files missed after deletion job

Similar Messages

Maybe you are looking for